blob: e1f6de53e20e15c61e7e07d069c93927e89082e3 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Insignal's Exynos4412 based Origen board device tree source
*
* Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Device tree source file for Insignal's Origen board which is based on
* Samsung's Exynos4412 SoC.
*/
/dts-v1/;
#include "exynos4412.dtsi"
#include <dt-bindings/clock/samsung,s2mps11.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "exynos-mfc-reserved-memory.dtsi"
/ {
model = "Insignal Origen evaluation board based on Exynos4412";
compatible = "insignal,origen4412", "samsung,exynos4412", "samsung,exynos4";
memory@40000000 {
device_type = "memory";
reg = <0x40000000 0x40000000>;
};
chosen {
stdout-path = "serial2:115200n8";
};
firmware@203f000 {
compatible = "samsung,secure-firmware";
reg = <0x0203F000 0x1000>;
};
mmc_reg: regulator-0 {
compatible = "regulator-fixed";
regulator-name = "VMEM_VDD_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
display-timings {
native-mode = <&timing0>;
timing0: timing {
clock-frequency = <47500000>;
hactive = <1024>;
vactive = <600>;
hfront-porch = <64>;
hback-porch = <16>;
hsync-len = <48>;
vback-porch = <64>;
vfront-porch = <16>;
vsync-len = <3>;
};
};
fixed-rate-clocks {
xxti {
compatible = "samsung,clock-xxti";
clock-frequency = <0>;
};
xusbxti {
compatible = "samsung,clock-xusbxti";
clock-frequency = <24000000>;
};
};
};
&cpu0 {
cpu0-supply = <&buck2_reg>;
};
&cpu_thermal {
cooling-maps {
cooling_map0: map0 {
/* Corresponds to 800MHz at freq_table */
cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
<&cpu2 7 7>, <&cpu3 7 7>;
};
cooling_map1: map1 {
/* Corresponds to 200MHz at freq_table */
cooling-device = <&cpu0 13 13>, <&cpu1 13 13>,
<&cpu2 13 13>, <&cpu3 13 13>;
};
};
};
&exynos_usbphy {
status = "okay";
};
&ehci {
samsung,vbus-gpio = <&gpx3 5 1>;
status = "okay";
phys = <&exynos_usbphy 2>, <&exynos_usbphy 3>;
phy-names = "hsic0", "hsic1";
};
&fimd {
pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
pinctrl-names = "default";
status = "okay";
};
&i2c_0 {
#address-cells = <1>;
#size-cells = <0>;
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <20000>;
pinctrl-0 = <&i2c0_bus>;
pinctrl-names = "default";
status = "okay";
pmic@66 {
compatible = "samsung,s5m8767-pmic";
reg = <0x66>;
s5m8767,pmic-buck-default-dvs-idx = <3>;
s5m8767,pmic-buck-dvs-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>,
<&gpx2 4 GPIO_ACTIVE_HIGH>,
<&gpx2 5 GPIO_ACTIVE_HIGH>;
s5m8767,pmic-buck-ds-gpios = <&gpm3 5 GPIO_ACTIVE_HIGH>,
<&gpm3 6 GPIO_ACTIVE_HIGH>,
<&gpm3 7 GPIO_ACTIVE_HIGH>;
s5m8767,pmic-buck2-dvs-voltage = <1250000>, <1200000>,
<1200000>, <1200000>,
<1200000>, <1200000>,
<1200000>, <1200000>;
s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
<1100000>, <1100000>,
<1100000>, <1100000>,
<1100000>, <1100000>;
s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
<1200000>, <1200000>,
<1200000>, <1200000>,
<1200000>, <1200000>;
s5m8767_osc: clocks {
compatible = "samsung,s5m8767-clk";
#clock-cells = <1>;
clock-output-names = "s5m8767_ap", "s5m8767_cp",
"s5m8767_bt";
};
regulators {
ldo1_reg: LDO1 {
regulator-name = "VDD_ALIVE";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
regulator-boot-on;
op_mode = <1>; /* Normal Mode */
};
ldo2_reg: LDO2 {
regulator-name = "VDDQ_M12";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
op_mode = <1>; /* Normal Mode */
};
ldo3_reg: LDO3 {
regulator-name = "VDDIOAP_18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
op_mode = <1>; /* Normal Mode */
};
ldo4_reg: LDO4 {
regulator-name = "VDDQ_PRE";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
op_mode = <1>; /* Normal Mode */
};
ldo5_reg: LDO5 {
regulator-name = "VDD18_2M";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
op_mode = <1>; /* Normal Mode */
};
ldo6_reg: LDO6 {
regulator-name = "VDD10_MPLL";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
op_mode = <1>; /* Normal Mode */
};
ldo7_reg: LDO7 {
regulator-name = "VDD10_XPLL";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
op_mode = <1>; /* Normal Mode */
};
ldo8_reg: LDO8 {
regulator-name = "VDD10_MIPI";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
op_mode = <1>; /* Normal Mode */
};
ldo9_reg: LDO9 {
regulator-name = "VDD33_LCD";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
op_mode = <1>; /* Normal Mode */
};
ldo10_reg: LDO10 {
regulator-name = "VDD18_MIPI";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
op_mode = <1>; /* Normal Mode */
};
ldo11_reg: LDO11 {
regulator-name = "VDD18_ABB1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
op_mode = <1>; /* Normal Mode */
};
ldo12_reg: LDO12 {
regulator-name = "VDD33_UOTG";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
op_mode = <1>; /* Normal Mode */
};
ldo13_reg: LDO13 {
regulator-name = "VDDIOPERI_18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
op_mode = <1>; /* Normal Mode */
};
ldo14_reg: LDO14 {
regulator-name = "VDD18_ABB02";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
op_mode = <1>; /* Normal Mode */
};
ldo15_reg: LDO15 {
regulator-name = "VDD10_USH";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
op_mode = <1>; /* Normal Mode */
};
ldo16_reg: LDO16 {
regulator-name = "VDD18_HSIC";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
op_mode = <1>; /* Normal Mode */
};
ldo17_reg: LDO17 {
regulator-name = "VDDIOAP_MMC012_28";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
op_mode = <1>; /* Normal Mode */
};
ldo18_reg: LDO18 {
regulator-name = "VDDIOPERI_28";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
op_mode = <1>; /* Normal Mode */
};
ldo19_reg: LDO19 {
regulator-name = "DVDD25";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
op_mode = <1>; /* Normal Mode */
};
ldo20_reg: LDO20 {
regulator-name = "VDD28_CAM";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
op_mode = <1>; /* Normal Mode */
};
ldo21_reg: LDO21 {
regulator-name = "VDD28_AF";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
op_mode = <1>; /* Normal Mode */
};
ldo22_reg: LDO22 {
regulator-name = "VDDA28_2M";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
op_mode = <1>; /* Normal Mode */
};
ldo23_reg: LDO23 {
regulator-name = "VDD28_TF";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
op_mode = <1>; /* Normal Mode */
};
ldo24_reg: LDO24 {
regulator-name = "VDD33_A31";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
op_mode = <1>; /* Normal Mode */
};
ldo25_reg: LDO25 {
regulator-name = "VDD18_CAM";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
op_mode = <1>; /* Normal Mode */
};
ldo26_reg: LDO26 {
regulator-name = "VDD18_A31";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
op_mode = <1>; /* Normal Mode */
};
ldo27_reg: LDO27 {
regulator-name = "GPS_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
op_mode = <1>; /* Normal Mode */
};
ldo28_reg: LDO28 {
regulator-name = "DVDD12";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
op_mode = <1>; /* Normal Mode */
};
buck1_reg: BUCK1 {
regulator-name = "VDD_MIF";
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
regulator-boot-on;
op_mode = <1>; /* Normal Mode */
};
buck2_reg: BUCK2 {
regulator-name = "VDD_ARM";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
op_mode = <1>; /* Normal Mode */
};
buck3_reg: BUCK3 {
regulator-name = "VDD_INT";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
regulator-boot-on;
op_mode = <1>; /* Normal Mode */
};
buck4_reg: BUCK4 {
regulator-name = "VDD_G3D";
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
op_mode = <1>; /* Normal Mode */
};
buck5_reg: BUCK5 {
regulator-name = "VDD_M12";
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
op_mode = <1>; /* Normal Mode */
};
buck6_reg: BUCK6 {
regulator-name = "VDD12_5M";
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
op_mode = <1>; /* Normal Mode */
};
buck9_reg: BUCK9 {
regulator-name = "VDDF28_EMMC";
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
regulator-boot-on;
op_mode = <1>; /* Normal Mode */
};
};
};
};
&keypad {
samsung,keypad-num-rows = <3>;
samsung,keypad-num-columns = <2>;
linux,keypad-no-autorepeat;
wakeup-source;
pinctrl-0 = <&keypad_rows &keypad_cols>;
pinctrl-names = "default";
status = "okay";
key-home {
keypad,row = <0>;
keypad,column = <0>;
linux,code = <KEY_HOME>;
};
key-down {
keypad,row = <0>;
keypad,column = <1>;
linux,code = <KEY_DOWN>;
};
key-up {
keypad,row = <1>;
keypad,column = <0>;
linux,code = <KEY_UP>;
};
key-menu {
keypad,row = <1>;
keypad,column = <1>;
linux,code = <KEY_MENU>;
};
key-back {
keypad,row = <2>;
keypad,column = <0>;
linux,code = <KEY_BACK>;
};
key-enter {
keypad,row = <2>;
keypad,column = <1>;
linux,code = <KEY_ENTER>;
};
};
&mshc_0 {
pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
pinctrl-names = "default";
status = "okay";
broken-cd;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
bus-width = <8>;
cap-mmc-highspeed;
};
&pinctrl_1 {
keypad_rows: keypad-rows {
samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
keypad_cols: keypad-cols {
samsung,pins = "gpx1-0", "gpx1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
};
&rtc {
status = "okay";
clocks = <&clock CLK_RTC>, <&s5m8767_osc S2MPS11_CLK_AP>;
clock-names = "rtc", "rtc_src";
};
&sdhci_2 {
bus-width = <4>;
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
pinctrl-names = "default";
vmmc-supply = <&mmc_reg>;
status = "okay";
};
&serial_0 {
status = "okay";
};
&serial_1 {
status = "okay";
};
&serial_2 {
status = "okay";
};
&serial_3 {
status = "okay";
};