blob: 6b121658d93cc24b08a9e0c1fd083735b1daf878 [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2014 Romain Perier <romain.perier@gmail.com>
*/
/dts-v1/;
#include "rk3066a.dtsi"
/ {
model = "MarsBoard RK3066";
compatible = "haoyu,marsboard-rk3066", "rockchip,rk3066a";
memory@60000000 {
device_type = "memory";
reg = <0x60000000 0x40000000>;
};
vdd_log: vdd-log {
compatible = "pwm-regulator";
pwms = <&pwm3 0 1000>;
regulator-name = "vdd_log";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
voltage-table = <1000000 100>,
<1200000 42>;
status = "okay";
};
vcc_sd0: sdmmc-regulator {
compatible = "regulator-fixed";
regulator-name = "sdmmc-supply";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
startup-delay-us = <100000>;
vin-supply = <&vcc_io>;
};
vsys: vsys-regulator {
compatible = "regulator-fixed";
regulator-name = "vsys";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
};
};
&cpu0 {
cpu-supply = <&vdd_arm>;
};
&cpu1 {
cpu-supply = <&vdd_arm>;
};
&i2c1 {
status = "okay";
clock-frequency = <400000>;
tps: tps@2d {
reg = <0x2d>;
interrupt-parent = <&gpio6>;
interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
vcc1-supply = <&vsys>;
vcc2-supply = <&vsys>;
vcc3-supply = <&vsys>;
vcc4-supply = <&vsys>;
vcc5-supply = <&vcc_io>;
vcc6-supply = <&vcc_io>;
vcc7-supply = <&vsys>;
vccio-supply = <&vsys>;
regulators {
vcc_rtc: regulator@0 {
regulator-name = "vcc_rtc";
regulator-always-on;
};
vcc_io: regulator@1 {
regulator-name = "vcc_io";
regulator-always-on;
};
vdd_arm: regulator@2 {
regulator-name = "vdd_arm";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
};
vcc_ddr: regulator@3 {
regulator-name = "vcc_ddr";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
};
vcc18_cif: regulator@5 {
regulator-name = "vcc18_cif";
regulator-always-on;
};
vdd_11: regulator@6 {
regulator-name = "vdd_11";
regulator-always-on;
};
vcc_25: regulator@7 {
regulator-name = "vcc_25";
regulator-always-on;
};
vcc_18: regulator@8 {
regulator-name = "vcc_18";
regulator-always-on;
};
vcc25_hdmi: regulator@9 {
regulator-name = "vcc25_hdmi";
regulator-always-on;
};
vcca_33: regulator@10 {
regulator-name = "vcca_33";
regulator-always-on;
};
vcc_rmii: regulator@11 {
regulator-name = "vcc_rmii";
};
vcc28_cif: regulator@12 {
regulator-name = "vcc28_cif";
regulator-always-on;
};
};
};
};
/* must be included after &tps gets defined */
#include "tps65910.dtsi"
&emac {
status = "okay";
phy = <&phy0>;
phy-supply = <&vcc_rmii>;
pinctrl-names = "default";
pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
phy0: ethernet-phy@0 {
reg = <0>;
interrupt-parent = <&gpio1>;
interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>;
};
};
&mmc0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
vmmc-supply = <&vcc_sd0>;
};
&pinctrl {
lan8720a {
phy_int: phy-int {
rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
&pwm3 {
status = "okay";
};
&uart0 {
status = "okay";
};
&uart1 {
status = "okay";
};
&uart2 {
status = "okay";
};
&uart3 {
status = "okay";
};
&usbphy {
status = "okay";
};
&usb_host {
status = "okay";
};
&usb_otg {
status = "okay";
};
&wdt {
status = "okay";
};