drivers/media/rc/ir-sanyo-decoder.c

// SPDX-License-Identifier: GPL-2.0
// ir-sanyo-decoder.c - handle SANYO IR Pulse/Space protocol
//
// Copyright (C) 2011 by Mauro Carvalho Chehab
//
// This protocol uses the NEC protocol timings. However, data is formatted as:
//	13 bits Custom Code
//	13 bits NOT(Custom Code)
//	8 bits Key data
//	8 bits NOT(Key data)
//
// According with LIRC, this protocol is used on Sanyo, Aiwa and Chinon
// Information for this protocol is available at the Sanyo LC7461 datasheet.

#include <linux/module.h>
#include <linux/bitrev.h>
#include "rc-core-priv.h"

#define SANYO_NBITS		(13+13+8+8)
#define SANYO_UNIT		562500  /* ns */
#define SANYO_HEADER_PULSE	(16  * SANYO_UNIT)
#define SANYO_HEADER_SPACE	(8   * SANYO_UNIT)
#define SANYO_BIT_PULSE		(1   * SANYO_UNIT)
#define SANYO_BIT_0_SPACE	(1   * SANYO_UNIT)
#define SANYO_BIT_1_SPACE	(3   * SANYO_UNIT)
#define SANYO_REPEAT_SPACE	(150 * SANYO_UNIT)
#define	SANYO_TRAILER_PULSE	(1   * SANYO_UNIT)
#define	SANYO_TRAILER_SPACE	(10  * SANYO_UNIT)	/* in fact, 42 */

enum sanyo_state {
	STATE_INACTIVE,
	STATE_HEADER_SPACE,
	STATE_BIT_PULSE,
	STATE_BIT_SPACE,
	STATE_TRAILER_PULSE,
	STATE_TRAILER_SPACE,
};

/**
 * ir_sanyo_decode() - Decode one SANYO pulse or space
 * @dev:	the struct rc_dev descriptor of the device
 * @ev:		the struct ir_raw_event descriptor of the pulse/space
 *
 * This function returns -EINVAL if the pulse violates the state machine
 */
static int ir_sanyo_decode(struct rc_dev *dev, struct ir_raw_event ev)
{
	struct sanyo_dec *data = &dev->raw->sanyo;
	u32 scancode;
	u16 address;
	u8 command, not_command;

	if (!is_timing_event(ev)) {
		if (ev.reset) {
			dev_dbg(&dev->dev, "SANYO event reset received. reset to state 0\n");
			data->state = STATE_INACTIVE;
		}
		return 0;
	}

	dev_dbg(&dev->dev, "SANYO decode started at state %d (%uus %s)\n",
		data->state, TO_US(ev.duration), TO_STR(ev.pulse));

	switch (data->state) {

	case STATE_INACTIVE:
		if (!ev.pulse)
			break;

		if (eq_margin(ev.duration, SANYO_HEADER_PULSE, SANYO_UNIT / 2)) {
			data->count = 0;
			data->state = STATE_HEADER_SPACE;
			return 0;
		}
		break;


	case STATE_HEADER_SPACE:
		if (ev.pulse)
			break;

		if (eq_margin(ev.duration, SANYO_HEADER_SPACE, SANYO_UNIT / 2)) {
			data->state = STATE_BIT_PULSE;
			return 0;
		}

		break;

	case STATE_BIT_PULSE:
		if (!ev.pulse)
			break;

		if (!eq_margin(ev.duration, SANYO_BIT_PULSE, SANYO_UNIT / 2))
			break;

		data->state = STATE_BIT_SPACE;
		return 0;

	case STATE_BIT_SPACE:
		if (ev.pulse)
			break;

		if (!data->count && geq_margin(ev.duration, SANYO_REPEAT_SPACE, SANYO_UNIT / 2)) {
			rc_repeat(dev);
			dev_dbg(&dev->dev, "SANYO repeat last key\n");
			data->state = STATE_INACTIVE;
			return 0;
		}

		data->bits <<= 1;
		if (eq_margin(ev.duration, SANYO_BIT_1_SPACE, SANYO_UNIT / 2))
			data->bits |= 1;
		else if (!eq_margin(ev.duration, SANYO_BIT_0_SPACE, SANYO_UNIT / 2))
			break;
		data->count++;

		if (data->count == SANYO_NBITS)
			data->state = STATE_TRAILER_PULSE;
		else
			data->state = STATE_BIT_PULSE;

		return 0;

	case STATE_TRAILER_PULSE:
		if (!ev.pulse)
			break;

		if (!eq_margin(ev.duration, SANYO_TRAILER_PULSE, SANYO_UNIT / 2))
			break;

		data->state = STATE_TRAILER_SPACE;
		return 0;

	case STATE_TRAILER_SPACE:
		if (ev.pulse)
			break;

		if (!geq_margin(ev.duration, SANYO_TRAILER_SPACE, SANYO_UNIT / 2))
			break;

		address     = bitrev16((data->bits >> 29) & 0x1fff) >> 3;
		/* not_address = bitrev16((data->bits >> 16) & 0x1fff) >> 3; */
		command	    = bitrev8((data->bits >>  8) & 0xff);
		not_command = bitrev8((data->bits >>  0) & 0xff);

		if ((command ^ not_command) != 0xff) {
			dev_dbg(&dev->dev, "SANYO checksum error: received 0x%08llx\n",
				data->bits);
			data->state = STATE_INACTIVE;
			return 0;
		}

		scancode = address << 8 | command;
		dev_dbg(&dev->dev, "SANYO scancode: 0x%06x\n", scancode);
		rc_keydown(dev, RC_PROTO_SANYO, scancode, 0);
		data->state = STATE_INACTIVE;
		return 0;
	}

	dev_dbg(&dev->dev, "SANYO decode failed at count %d state %d (%uus %s)\n",
		data->count, data->state, TO_US(ev.duration), TO_STR(ev.pulse));
	data->state = STATE_INACTIVE;
	return -EINVAL;
}

static const struct ir_raw_timings_pd ir_sanyo_timings = {
	.header_pulse  = SANYO_HEADER_PULSE,
	.header_space  = SANYO_HEADER_SPACE,
	.bit_pulse     = SANYO_BIT_PULSE,
	.bit_space[0]  = SANYO_BIT_0_SPACE,
	.bit_space[1]  = SANYO_BIT_1_SPACE,
	.trailer_pulse = SANYO_TRAILER_PULSE,
	.trailer_space = SANYO_TRAILER_SPACE,
	.msb_first     = 1,
};

/**
 * ir_sanyo_encode() - Encode a scancode as a stream of raw events
 *
 * @protocol:	protocol to encode
 * @scancode:	scancode to encode
 * @events:	array of raw ir events to write into
 * @max:	maximum size of @events
 *
 * Returns:	The number of events written.
 *		-ENOBUFS if there isn't enough space in the array to fit the
 *		encoding. In this case all @max events will have been written.
 */
static int ir_sanyo_encode(enum rc_proto protocol, u32 scancode,
			   struct ir_raw_event *events, unsigned int max)
{
	struct ir_raw_event *e = events;
	int ret;
	u64 raw;

	raw = ((u64)(bitrev16(scancode >> 8) & 0xfff8) << (8 + 8 + 13 - 3)) |
	      ((u64)(bitrev16(~scancode >> 8) & 0xfff8) << (8 + 8 +  0 - 3)) |
	      ((bitrev8(scancode) & 0xff) << 8) |
	      (bitrev8(~scancode) & 0xff);

	ret = ir_raw_gen_pd(&e, max, &ir_sanyo_timings, SANYO_NBITS, raw);
	if (ret < 0)
		return ret;

	return e - events;
}

static struct ir_raw_handler sanyo_handler = {
	.protocols	= RC_PROTO_BIT_SANYO,
	.decode		= ir_sanyo_decode,
	.encode		= ir_sanyo_encode,
	.carrier	= 38000,
	.min_timeout	= SANYO_TRAILER_SPACE,
};

static int __init ir_sanyo_decode_init(void)
{
	ir_raw_handler_register(&sanyo_handler);

	printk(KERN_INFO "IR SANYO protocol handler initialized\n");
	return 0;
}

static void __exit ir_sanyo_decode_exit(void)
{
	ir_raw_handler_unregister(&sanyo_handler);
}

module_init(ir_sanyo_decode_init);
module_exit(ir_sanyo_decode_exit);

MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Mauro Carvalho Chehab");
MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)");
MODULE_DESCRIPTION("SANYO IR protocol decoder");