bluetooth-next pull request for net-next:
core:
- HCI: Add initial support for PAST
- hci_core: Introduce HCI_CONN_FLAG_PAST
- ISO: Add support to bind to trigger PAST
- HCI: Always use the identity address when initializing a connection
- ISO: Attempt to resolve broadcast address
- MGMT: Allow use of Set Device Flags without Add Device
- ISO: Fix not updating BIS sender source address
- HCI: Add support for LL Extended Feature Set
driver:
- btusb: Add new VID/PID 2b89/6275 for RTL8761BUV
- btusb: MT7920: Add VID/PID 0489/e135
- btusb: MT7922: Add VID/PID 0489/e170
- btusb: Add new VID/PID 13d3/3533 for RTL8821CE
- btusb: Add new VID/PID 0x0489/0xE12F for RTL8852BE-VT
- btusb: Add new VID/PID 0x13d3/0x3618 for RTL8852BE-VT
- btusb: Add new VID/PID 0x13d3/0x3619 for RTL8852BE-VT
- btusb: Reclassify Qualcomm WCN6855 debug packets
- btintel_pcie: Introduce HCI Driver protocol
- btintel_pcie: Support for S4 (Hibernate)
- btintel_pcie: Suspend/Resume: Controller doorbell interrupt handling
- dt-bindings: net: Convert Marvell 8897/8997 bindings to DT schema
- btbcm: Use kmalloc_array() to prevent overflow
- btrtl: Add the support for RTL8761CUV
- hci_h5: avoid sending two SYNC messages
- hci_h5: implement CRC data integrity
MAINTAINERS:
- Add Bartosz Golaszewski as Qualcomm hci_qca maintainer
Bluetooth: btusb: Add new VID/PID 13d3/3533 for RTL8821CE
Add VID 13d3 & PID 3533 for Realtek RTL8821CE USB Bluetooth chip.
The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3533 Rev= 1.10
S: Manufacturer=Realtek
S: Product=Bluetooth Radio
S: SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Gongwei Li <ligongwei@kylinos.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
1 file changed