arch/arm/vfp/vfpmodule.c - linux/kernel/git/bpf/bpf-next - Git at Google

 /*
  *  linux/arch/arm/vfp/vfpmodule.c
  *
  *  Copyright (C) 2004 ARM Limited.
  *  Written by Deep Blue Solutions Limited.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
 #include <linux/module.h>
 #include <linux/config.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/signal.h>
 #include <linux/sched.h>
 #include <linux/init.h>
 #include <asm/vfp.h>

 #include "vfpinstr.h"
 #include "vfp.h"

 /*
  * Our undef handlers (in entry.S)
  */
 void vfp_testing_entry(void);
 void vfp_support_entry(void);

 void (*vfp_vector)(void) = vfp_testing_entry;
 union vfp_state *last_VFP_context;

 /*
  * Dual-use variable.
  * Used in startup: set to non-zero if VFP checks fail
  * After startup, holds VFP architecture
  */
 unsigned int VFP_arch;

 /*
  * Per-thread VFP initialisation.
  */
 void vfp_flush_thread(union vfp_state *vfp)
 {
 	memset(vfp, 0, sizeof(union vfp_state));

 	vfp->hard.fpexc = FPEXC_ENABLE;
 	vfp->hard.fpscr = FPSCR_ROUND_NEAREST;

 	/*
 	 * Disable VFP to ensure we initialise it first.
 	 */
 	fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_ENABLE);

 	/*
 	 * Ensure we don't try to overwrite our newly initialised
 	 * state information on the first fault.
 	 */
 	if (last_VFP_context == vfp)
 		last_VFP_context = NULL;
 }

 /*
  * Per-thread VFP cleanup.
  */
 void vfp_release_thread(union vfp_state *vfp)
 {
 	if (last_VFP_context == vfp)
 		last_VFP_context = NULL;
 }

 /*
  * Raise a SIGFPE for the current process.
  * sicode describes the signal being raised.
  */
 void vfp_raise_sigfpe(unsigned int sicode, struct pt_regs *regs)
 {
 	siginfo_t info;

 	memset(&info, 0, sizeof(info));

 	info.si_signo = SIGFPE;
 	info.si_code = sicode;
 	info.si_addr = (void *)(instruction_pointer(regs) - 4);

 	/*
 	 * This is the same as NWFPE, because it's not clear what
 	 * this is used for
 	 */
 	current->thread.error_code = 0;
 	current->thread.trap_no = 6;

 	send_sig_info(SIGFPE, &info, current);
 }

 static void vfp_panic(char *reason)
 {
 	int i;

 	printk(KERN_ERR "VFP: Error: %s\n", reason);
 	printk(KERN_ERR "VFP: EXC 0x%08x SCR 0x%08x INST 0x%08x\n",
 		fmrx(FPEXC), fmrx(FPSCR), fmrx(FPINST));
 	for (i = 0; i < 32; i += 2)
 		printk(KERN_ERR "VFP: s%2u: 0x%08x s%2u: 0x%08x\n",
 		       i, vfp_get_float(i), i+1, vfp_get_float(i+1));
 }

 /*
  * Process bitmask of exception conditions.
  */
 static void vfp_raise_exceptions(u32 exceptions, u32 inst, u32 fpscr, struct pt_regs *regs)
 {
 	int si_code = 0;

 	pr_debug("VFP: raising exceptions %08x\n", exceptions);

 	if (exceptions == (u32)-1) {
 		vfp_panic("unhandled bounce");
 		vfp_raise_sigfpe(0, regs);
 		return;
 	}

 	/*
 	 * If any of the status flags are set, update the FPSCR.
 	 * Comparison instructions always return at least one of
 	 * these flags set.
 	 */
 	if (exceptions & (FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V))
 		fpscr &= ~(FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V);

 	fpscr |= exceptions;

 	fmxr(FPSCR, fpscr);

 #define RAISE(stat,en,sig)				\
 	if (exceptions & stat && fpscr & en)		\
 		si_code = sig;

 	/*
 	 * These are arranged in priority order, least to highest.
 	 */
 	RAISE(FPSCR_IXC, FPSCR_IXE, FPE_FLTRES);
 	RAISE(FPSCR_UFC, FPSCR_UFE, FPE_FLTUND);
 	RAISE(FPSCR_OFC, FPSCR_OFE, FPE_FLTOVF);
 	RAISE(FPSCR_IOC, FPSCR_IOE, FPE_FLTINV);

 	if (si_code)
 		vfp_raise_sigfpe(si_code, regs);
 }

 /*
  * Emulate a VFP instruction.
  */
 static u32 vfp_emulate_instruction(u32 inst, u32 fpscr, struct pt_regs *regs)
 {
 	u32 exceptions = (u32)-1;

 	pr_debug("VFP: emulate: INST=0x%08x SCR=0x%08x\n", inst, fpscr);

 	if (INST_CPRTDO(inst)) {
 		if (!INST_CPRT(inst)) {
 			/*
 			 * CPDO
 			 */
 			if (vfp_single(inst)) {
 				exceptions = vfp_single_cpdo(inst, fpscr);
 			} else {
 				exceptions = vfp_double_cpdo(inst, fpscr);
 			}
 		} else {
 			/*
 			 * A CPRT instruction can not appear in FPINST2, nor
 			 * can it cause an exception.  Therefore, we do not
 			 * have to emulate it.
 			 */
 		}
 	} else {
 		/*
 		 * A CPDT instruction can not appear in FPINST2, nor can
 		 * it cause an exception.  Therefore, we do not have to
 		 * emulate it.
 		 */
 	}
 	return exceptions;
 }

 /*
  * Package up a bounce condition.
  */
 void VFP9_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs)
 {
 	u32 fpscr, orig_fpscr, exceptions, inst;

 	pr_debug("VFP: bounce: trigger %08x fpexc %08x\n", trigger, fpexc);

 	/*
 	 * Enable access to the VFP so we can handle the bounce.
 	 */
 	fmxr(FPEXC, fpexc & ~(FPEXC_EXCEPTION|FPEXC_INV|FPEXC_UFC|FPEXC_IOC));

 	orig_fpscr = fpscr = fmrx(FPSCR);

 	/*
 	 * If we are running with inexact exceptions enabled, we need to
 	 * emulate the trigger instruction.  Note that as we're emulating
 	 * the trigger instruction, we need to increment PC.
 	 */
 	if (fpscr & FPSCR_IXE) {
 		regs->ARM_pc += 4;
 		goto emulate;
 	}

 	barrier();

 	/*
 	 * Modify fpscr to indicate the number of iterations remaining
 	 */
 	if (fpexc & FPEXC_EXCEPTION) {
 		u32 len;

 		len = fpexc + (1 << FPEXC_LENGTH_BIT);

 		fpscr &= ~FPSCR_LENGTH_MASK;
 		fpscr |= (len & FPEXC_LENGTH_MASK) << (FPSCR_LENGTH_BIT - FPEXC_LENGTH_BIT);
 	}

 	/*
 	 * Handle the first FP instruction.  We used to take note of the
 	 * FPEXC bounce reason, but this appears to be unreliable.
 	 * Emulate the bounced instruction instead.
 	 */
 	inst = fmrx(FPINST);
 	exceptions = vfp_emulate_instruction(inst, fpscr, regs);
 	if (exceptions)
 		vfp_raise_exceptions(exceptions, inst, orig_fpscr, regs);

 	/*
 	 * If there isn't a second FP instruction, exit now.
 	 */
 	if (!(fpexc & FPEXC_FPV2))
 		return;

 	/*
 	 * The barrier() here prevents fpinst2 being read
 	 * before the condition above.
 	 */
 	barrier();
 	trigger = fmrx(FPINST2);
 	fpscr = fmrx(FPSCR);

  emulate:
 	exceptions = vfp_emulate_instruction(trigger, fpscr, regs);
 	if (exceptions)
 		vfp_raise_exceptions(exceptions, trigger, orig_fpscr, regs);
 }

 /*
  * VFP support code initialisation.
  */
 static int __init vfp_init(void)
 {
 	unsigned int vfpsid;

 	/*
 	 * First check that there is a VFP that we can use.
 	 * The handler is already setup to just log calls, so
 	 * we just need to read the VFPSID register.
 	 */
 	vfpsid = fmrx(FPSID);

 	printk(KERN_INFO "VFP support v0.3: ");
 	if (VFP_arch) {
 		printk("not present\n");
 	} else if (vfpsid & FPSID_NODOUBLE) {
 		printk("no double precision support\n");
 	} else {
 		VFP_arch = (vfpsid & FPSID_ARCH_MASK) >> FPSID_ARCH_BIT;  /* Extract the architecture version */
 		printk("implementor %02x architecture %d part %02x variant %x rev %x\n",
 			(vfpsid & FPSID_IMPLEMENTER_MASK) >> FPSID_IMPLEMENTER_BIT,
 			(vfpsid & FPSID_ARCH_MASK) >> FPSID_ARCH_BIT,
 			(vfpsid & FPSID_PART_MASK) >> FPSID_PART_BIT,
 			(vfpsid & FPSID_VARIANT_MASK) >> FPSID_VARIANT_BIT,
 			(vfpsid & FPSID_REV_MASK) >> FPSID_REV_BIT);
 		vfp_vector = vfp_support_entry;
 	}
 	return 0;
 }

 late_initcall(vfp_init);
	/*
	* linux/arch/arm/vfp/vfpmodule.c
	*
	* Copyright (C) 2004 ARM Limited.
	* Written by Deep Blue Solutions Limited.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 as
	* published by the Free Software Foundation.
	*/
	#include <linux/module.h>
	#include <linux/config.h>
	#include <linux/types.h>
	#include <linux/kernel.h>
	#include <linux/signal.h>
	#include <linux/sched.h>
	#include <linux/init.h>
	#include <asm/vfp.h>

	#include "vfpinstr.h"
	#include "vfp.h"

	/*
	* Our undef handlers (in entry.S)
	*/
	void vfp_testing_entry(void);
	void vfp_support_entry(void);

	void (*vfp_vector)(void) = vfp_testing_entry;
	union vfp_state *last_VFP_context;

	/*
	* Dual-use variable.
	* Used in startup: set to non-zero if VFP checks fail
	* After startup, holds VFP architecture
	*/
	unsigned int VFP_arch;

	/*
	* Per-thread VFP initialisation.
	*/
	void vfp_flush_thread(union vfp_state *vfp)
	{
	memset(vfp, 0, sizeof(union vfp_state));

	vfp->hard.fpexc = FPEXC_ENABLE;
	vfp->hard.fpscr = FPSCR_ROUND_NEAREST;

	/*
	* Disable VFP to ensure we initialise it first.
	*/
	fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_ENABLE);

	/*
	* Ensure we don't try to overwrite our newly initialised
	* state information on the first fault.
	*/
	if (last_VFP_context == vfp)
	last_VFP_context = NULL;
	}

	/*
	* Per-thread VFP cleanup.
	*/
	void vfp_release_thread(union vfp_state *vfp)
	{
	if (last_VFP_context == vfp)
	last_VFP_context = NULL;
	}

	/*
	* Raise a SIGFPE for the current process.
	* sicode describes the signal being raised.
	*/
	void vfp_raise_sigfpe(unsigned int sicode, struct pt_regs *regs)
	{
	siginfo_t info;

	memset(&info, 0, sizeof(info));

	info.si_signo = SIGFPE;
	info.si_code = sicode;
	info.si_addr = (void *)(instruction_pointer(regs) - 4);

	/*
	* This is the same as NWFPE, because it's not clear what
	* this is used for
	*/
	current->thread.error_code = 0;
	current->thread.trap_no = 6;

	send_sig_info(SIGFPE, &info, current);
	}

	static void vfp_panic(char *reason)
	{
	int i;

	printk(KERN_ERR "VFP: Error: %s\n", reason);
	printk(KERN_ERR "VFP: EXC 0x%08x SCR 0x%08x INST 0x%08x\n",
	fmrx(FPEXC), fmrx(FPSCR), fmrx(FPINST));
	for (i = 0; i < 32; i += 2)
	printk(KERN_ERR "VFP: s%2u: 0x%08x s%2u: 0x%08x\n",
	i, vfp_get_float(i), i+1, vfp_get_float(i+1));
	}

	/*
	* Process bitmask of exception conditions.
	*/
	static void vfp_raise_exceptions(u32 exceptions, u32 inst, u32 fpscr, struct pt_regs *regs)
	{
	int si_code = 0;

	pr_debug("VFP: raising exceptions %08x\n", exceptions);

	if (exceptions == (u32)-1) {
	vfp_panic("unhandled bounce");
	vfp_raise_sigfpe(0, regs);
	return;
	}

	/*
	* If any of the status flags are set, update the FPSCR.
	* Comparison instructions always return at least one of
	* these flags set.
	*/
	if (exceptions & (FPSCR_N\|FPSCR_Z\|FPSCR_C\|FPSCR_V))
	fpscr &= ~(FPSCR_N\|FPSCR_Z\|FPSCR_C\|FPSCR_V);

	fpscr \|= exceptions;

	fmxr(FPSCR, fpscr);

	#define RAISE(stat,en,sig) \
	if (exceptions & stat && fpscr & en) \
	si_code = sig;

	/*
	* These are arranged in priority order, least to highest.
	*/
	RAISE(FPSCR_IXC, FPSCR_IXE, FPE_FLTRES);
	RAISE(FPSCR_UFC, FPSCR_UFE, FPE_FLTUND);
	RAISE(FPSCR_OFC, FPSCR_OFE, FPE_FLTOVF);
	RAISE(FPSCR_IOC, FPSCR_IOE, FPE_FLTINV);

	if (si_code)
	vfp_raise_sigfpe(si_code, regs);
	}

	/*
	* Emulate a VFP instruction.
	*/
	static u32 vfp_emulate_instruction(u32 inst, u32 fpscr, struct pt_regs *regs)
	{
	u32 exceptions = (u32)-1;

	pr_debug("VFP: emulate: INST=0x%08x SCR=0x%08x\n", inst, fpscr);

	if (INST_CPRTDO(inst)) {
	if (!INST_CPRT(inst)) {
	/*
	* CPDO
	*/
	if (vfp_single(inst)) {
	exceptions = vfp_single_cpdo(inst, fpscr);
	} else {
	exceptions = vfp_double_cpdo(inst, fpscr);
	}
	} else {
	/*
	* A CPRT instruction can not appear in FPINST2, nor
	* can it cause an exception. Therefore, we do not
	* have to emulate it.
	*/
	}
	} else {
	/*
	* A CPDT instruction can not appear in FPINST2, nor can
	* it cause an exception. Therefore, we do not have to
	* emulate it.
	*/
	}
	return exceptions;
	}

	/*
	* Package up a bounce condition.
	*/
	void VFP9_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs)
	{
	u32 fpscr, orig_fpscr, exceptions, inst;

	pr_debug("VFP: bounce: trigger %08x fpexc %08x\n", trigger, fpexc);

	/*
	* Enable access to the VFP so we can handle the bounce.
	*/
	fmxr(FPEXC, fpexc & ~(FPEXC_EXCEPTION\|FPEXC_INV\|FPEXC_UFC\|FPEXC_IOC));

	orig_fpscr = fpscr = fmrx(FPSCR);

	/*
	* If we are running with inexact exceptions enabled, we need to
	* emulate the trigger instruction. Note that as we're emulating
	* the trigger instruction, we need to increment PC.
	*/
	if (fpscr & FPSCR_IXE) {
	regs->ARM_pc += 4;
	goto emulate;
	}

	barrier();

	/*
	* Modify fpscr to indicate the number of iterations remaining
	*/
	if (fpexc & FPEXC_EXCEPTION) {
	u32 len;

	len = fpexc + (1 << FPEXC_LENGTH_BIT);

	fpscr &= ~FPSCR_LENGTH_MASK;
	fpscr \|= (len & FPEXC_LENGTH_MASK) << (FPSCR_LENGTH_BIT - FPEXC_LENGTH_BIT);
	}

	/*
	* Handle the first FP instruction. We used to take note of the
	* FPEXC bounce reason, but this appears to be unreliable.
	* Emulate the bounced instruction instead.
	*/
	inst = fmrx(FPINST);
	exceptions = vfp_emulate_instruction(inst, fpscr, regs);
	if (exceptions)
	vfp_raise_exceptions(exceptions, inst, orig_fpscr, regs);

	/*
	* If there isn't a second FP instruction, exit now.
	*/
	if (!(fpexc & FPEXC_FPV2))
	return;

	/*
	* The barrier() here prevents fpinst2 being read
	* before the condition above.
	*/
	barrier();
	trigger = fmrx(FPINST2);
	fpscr = fmrx(FPSCR);

	emulate:
	exceptions = vfp_emulate_instruction(trigger, fpscr, regs);
	if (exceptions)
	vfp_raise_exceptions(exceptions, trigger, orig_fpscr, regs);
	}

	/*
	* VFP support code initialisation.
	*/
	static int __init vfp_init(void)
	{
	unsigned int vfpsid;

	/*
	* First check that there is a VFP that we can use.
	* The handler is already setup to just log calls, so
	* we just need to read the VFPSID register.
	*/
	vfpsid = fmrx(FPSID);

	printk(KERN_INFO "VFP support v0.3: ");
	if (VFP_arch) {
	printk("not present\n");
	} else if (vfpsid & FPSID_NODOUBLE) {
	printk("no double precision support\n");
	} else {
	VFP_arch = (vfpsid & FPSID_ARCH_MASK) >> FPSID_ARCH_BIT; /* Extract the architecture version */
	printk("implementor %02x architecture %d part %02x variant %x rev %x\n",
	(vfpsid & FPSID_IMPLEMENTER_MASK) >> FPSID_IMPLEMENTER_BIT,
	(vfpsid & FPSID_ARCH_MASK) >> FPSID_ARCH_BIT,
	(vfpsid & FPSID_PART_MASK) >> FPSID_PART_BIT,
	(vfpsid & FPSID_VARIANT_MASK) >> FPSID_VARIANT_BIT,
	(vfpsid & FPSID_REV_MASK) >> FPSID_REV_BIT);
	vfp_vector = vfp_support_entry;
	}
	return 0;
	}

	late_initcall(vfp_init);