/* linux/include/asm-arm/arch-omap/tps65010.h
 *
 * Functions to access TPS65010 power management device.
 *
 * Copyright (C) 2004 Dirk Behme <dirk.behme@de.bosch.com>
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the
 * Free Software Foundation; either version 2 of the License, or (at your
 * option) any later version.
 *
 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
 * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 * You should have received a copy of the  GNU General Public License along
 * with this program; if not, write  to the Free Software Foundation, Inc.,
 * 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#ifndef __ASM_ARCH_TPS65010_H
#define __ASM_ARCH_TPS65010_H

/*
 * ----------------------------------------------------------------------------
 * Registers, all 8 bits
 * ----------------------------------------------------------------------------
 */

#define	TPS_CHGSTATUS		0x01
#	define	TPS_CHG_USB		(1 << 7)
#	define	TPS_CHG_AC		(1 << 6)
#	define	TPS_CHG_THERM		(1 << 5)
#	define	TPS_CHG_TERM		(1 << 4)
#	define	TPS_CHG_TAPER_TMO	(1 << 3)
#	define	TPS_CHG_CHG_TMO		(1 << 2)
#	define	TPS_CHG_PRECHG_TMO	(1 << 1)
#	define	TPS_CHG_TEMP_ERR	(1 << 0)
#define	TPS_REGSTATUS		0x02
#	define	TPS_REG_ONOFF		(1 << 7)
#	define	TPS_REG_COVER		(1 << 6)
#	define	TPS_REG_UVLO		(1 << 5)
#	define	TPS_REG_NO_CHG		(1 << 4)	/* tps65013 */
#	define	TPS_REG_PG_LD02		(1 << 3)
#	define	TPS_REG_PG_LD01		(1 << 2)
#	define	TPS_REG_PG_MAIN		(1 << 1)
#	define	TPS_REG_PG_CORE		(1 << 0)
#define	TPS_MASK1		0x03
#define	TPS_MASK2		0x04
#define	TPS_ACKINT1		0x05
#define	TPS_ACKINT2		0x06
#define	TPS_CHGCONFIG		0x07
#	define	TPS_CHARGE_POR		(1 << 7)	/* 65010/65012 */
#	define	TPS65013_AUA		(1 << 7)	/* 65011/65013 */
#	define	TPS_CHARGE_RESET	(1 << 6)
#	define	TPS_CHARGE_FAST		(1 << 5)
#	define	TPS_CHARGE_CURRENT	(3 << 3)
#	define	TPS_VBUS_500MA		(1 << 2)
#	define	TPS_VBUS_CHARGING	(1 << 1)
#	define	TPS_CHARGE_ENABLE	(1 << 0)
#define	TPS_LED1_ON		0x08
#define	TPS_LED1_PER		0x09
#define	TPS_LED2_ON		0x0a
#define	TPS_LED2_PER		0x0b
#define	TPS_VDCDC1		0x0c
#	define	TPS_ENABLE_LP		(1 << 3)
#define	TPS_VDCDC2		0x0d
#define	TPS_VREGS1		0x0e
#	define	TPS_LDO2_ENABLE	(1 << 7)
#	define	TPS_LDO2_OFF	(1 << 6)
#	define	TPS_VLDO2_3_0V	(3 << 4)
#	define	TPS_VLDO2_2_75V	(2 << 4)
#	define	TPS_VLDO2_2_5V	(1 << 4)
#	define	TPS_VLDO2_1_8V	(0 << 4)
#	define	TPS_LDO1_ENABLE	(1 << 3)
#	define	TPS_LDO1_OFF	(1 << 2)
#	define	TPS_VLDO1_3_0V	(3 << 0)
#	define	TPS_VLDO1_2_75V	(2 << 0)
#	define	TPS_VLDO1_2_5V	(1 << 0)
#	define	TPS_VLDO1_ADJ	(0 << 0)
#define	TPS_MASK3		0x0f
#define	TPS_DEFGPIO		0x10

/*
 * ----------------------------------------------------------------------------
 * Macros used by exported functions
 * ----------------------------------------------------------------------------
 */

#define LED1  1
#define LED2  2
#define OFF   0
#define ON    1
#define BLINK 2
#define GPIO1 1
#define GPIO2 2
#define GPIO3 3
#define GPIO4 4
#define LOW   0
#define HIGH  1

/*
 * ----------------------------------------------------------------------------
 * Exported functions
 * ----------------------------------------------------------------------------
 */

/* Draw from VBUS:
 *   0 mA -- DON'T DRAW (might supply power instead)
 * 100 mA -- usb unit load (slowest charge rate)
 * 500 mA -- usb high power (fast battery charge)
 */
extern int tps65010_set_vbus_draw(unsigned mA);

/* tps65010_set_gpio_out_value parameter:
 * gpio:  GPIO1, GPIO2, GPIO3 or GPIO4
 * value: LOW or HIGH
 */
extern int tps65010_set_gpio_out_value(unsigned gpio, unsigned value);

/* tps65010_set_led parameter:
 * led:  LED1 or LED2
 * mode: ON, OFF or BLINK
 */
extern int tps65010_set_led(unsigned led, unsigned mode);

/* tps65010_set_vib parameter:
 * value: ON or OFF
 */
extern int tps65010_set_vib(unsigned value);

/* tps65010_set_low_pwr parameter:
 * mode: ON or OFF
 */
extern int tps65010_set_low_pwr(unsigned mode);

/* tps65010_config_vregs1 parameter:
 * value to be written to VREGS1 register
 * Note: The complete register is written, set all bits you need
 */
extern int tps65010_config_vregs1(unsigned value);

/* tps65013_set_low_pwr parameter:
 * mode: ON or OFF
 */
extern int tps65013_set_low_pwr(unsigned mode);

#endif /*  __ASM_ARCH_TPS65010_H */