blob: c8857d7bdb37f1150b9060599482d5a8892c045a [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Symmetric key ciphers.
*
* Copyright (c) 2007-2015 Herbert Xu <herbert@gondor.apana.org.au>
*/
#ifndef _CRYPTO_SKCIPHER_H
#define _CRYPTO_SKCIPHER_H
#include <linux/atomic.h>
#include <linux/container_of.h>
#include <linux/crypto.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/types.h>
/* Set this bit if the lskcipher operation is a continuation. */
#define CRYPTO_LSKCIPHER_FLAG_CONT 0x00000001
/* Set this bit if the lskcipher operation is final. */
#define CRYPTO_LSKCIPHER_FLAG_FINAL 0x00000002
/* The bit CRYPTO_TFM_REQ_MAY_SLEEP can also be set if needed. */
/* Set this bit if the skcipher operation is a continuation. */
#define CRYPTO_SKCIPHER_REQ_CONT 0x00000001
/* Set this bit if the skcipher operation is not final. */
#define CRYPTO_SKCIPHER_REQ_NOTFINAL 0x00000002
struct scatterlist;
/**
* struct skcipher_request - Symmetric key cipher request
* @cryptlen: Number of bytes to encrypt or decrypt
* @iv: Initialisation Vector
* @src: Source SG list
* @dst: Destination SG list
* @base: Underlying async request
* @__ctx: Start of private context data
*/
struct skcipher_request {
unsigned int cryptlen;
u8 *iv;
struct scatterlist *src;
struct scatterlist *dst;
struct crypto_async_request base;
void *__ctx[] CRYPTO_MINALIGN_ATTR;
};
struct crypto_skcipher {
unsigned int reqsize;
struct crypto_tfm base;
};
struct crypto_sync_skcipher {
struct crypto_skcipher base;
};
struct crypto_lskcipher {
struct crypto_tfm base;
};
/*
* struct crypto_istat_cipher - statistics for cipher algorithm
* @encrypt_cnt: number of encrypt requests
* @encrypt_tlen: total data size handled by encrypt requests
* @decrypt_cnt: number of decrypt requests
* @decrypt_tlen: total data size handled by decrypt requests
* @err_cnt: number of error for cipher requests
*/
struct crypto_istat_cipher {
atomic64_t encrypt_cnt;
atomic64_t encrypt_tlen;
atomic64_t decrypt_cnt;
atomic64_t decrypt_tlen;
atomic64_t err_cnt;
};
#ifdef CONFIG_CRYPTO_STATS
#define SKCIPHER_ALG_COMMON_STAT struct crypto_istat_cipher stat;
#else
#define SKCIPHER_ALG_COMMON_STAT
#endif
/*
* struct skcipher_alg_common - common properties of skcipher_alg
* @min_keysize: Minimum key size supported by the transformation. This is the
* smallest key length supported by this transformation algorithm.
* This must be set to one of the pre-defined values as this is
* not hardware specific. Possible values for this field can be
* found via git grep "_MIN_KEY_SIZE" include/crypto/
* @max_keysize: Maximum key size supported by the transformation. This is the
* largest key length supported by this transformation algorithm.
* This must be set to one of the pre-defined values as this is
* not hardware specific. Possible values for this field can be
* found via git grep "_MAX_KEY_SIZE" include/crypto/
* @ivsize: IV size applicable for transformation. The consumer must provide an
* IV of exactly that size to perform the encrypt or decrypt operation.
* @chunksize: Equal to the block size except for stream ciphers such as
* CTR where it is set to the underlying block size.
* @statesize: Size of the internal state for the algorithm.
* @stat: Statistics for cipher algorithm
* @base: Definition of a generic crypto algorithm.
*/
#define SKCIPHER_ALG_COMMON { \
unsigned int min_keysize; \
unsigned int max_keysize; \
unsigned int ivsize; \
unsigned int chunksize; \
unsigned int statesize; \
\
SKCIPHER_ALG_COMMON_STAT \
\
struct crypto_alg base; \
}
struct skcipher_alg_common SKCIPHER_ALG_COMMON;
/**
* struct skcipher_alg - symmetric key cipher definition
* @setkey: Set key for the transformation. This function is used to either
* program a supplied key into the hardware or store the key in the
* transformation context for programming it later. Note that this
* function does modify the transformation context. This function can
* be called multiple times during the existence of the transformation
* object, so one must make sure the key is properly reprogrammed into
* the hardware. This function is also responsible for checking the key
* length for validity. In case a software fallback was put in place in
* the @cra_init call, this function might need to use the fallback if
* the algorithm doesn't support all of the key sizes.
* @encrypt: Encrypt a scatterlist of blocks. This function is used to encrypt
* the supplied scatterlist containing the blocks of data. The crypto
* API consumer is responsible for aligning the entries of the
* scatterlist properly and making sure the chunks are correctly
* sized. In case a software fallback was put in place in the
* @cra_init call, this function might need to use the fallback if
* the algorithm doesn't support all of the key sizes. In case the
* key was stored in transformation context, the key might need to be
* re-programmed into the hardware in this function. This function
* shall not modify the transformation context, as this function may
* be called in parallel with the same transformation object.
* @decrypt: Decrypt a single block. This is a reverse counterpart to @encrypt
* and the conditions are exactly the same.
* @export: Export partial state of the transformation. This function dumps the
* entire state of the ongoing transformation into a provided block of
* data so it can be @import 'ed back later on. This is useful in case
* you want to save partial result of the transformation after
* processing certain amount of data and reload this partial result
* multiple times later on for multiple re-use. No data processing
* happens at this point.
* @import: Import partial state of the transformation. This function loads the
* entire state of the ongoing transformation from a provided block of
* data so the transformation can continue from this point onward. No
* data processing happens at this point.
* @init: Initialize the cryptographic transformation object. This function
* is used to initialize the cryptographic transformation object.
* This function is called only once at the instantiation time, right
* after the transformation context was allocated. In case the
* cryptographic hardware has some special requirements which need to
* be handled by software, this function shall check for the precise
* requirement of the transformation and put any software fallbacks
* in place.
* @exit: Deinitialize the cryptographic transformation object. This is a
* counterpart to @init, used to remove various changes set in
* @init.
* @walksize: Equal to the chunk size except in cases where the algorithm is
* considerably more efficient if it can operate on multiple chunks
* in parallel. Should be a multiple of chunksize.
* @co: see struct skcipher_alg_common
*
* All fields except @ivsize are mandatory and must be filled.
*/
struct skcipher_alg {
int (*setkey)(struct crypto_skcipher *tfm, const u8 *key,
unsigned int keylen);
int (*encrypt)(struct skcipher_request *req);
int (*decrypt)(struct skcipher_request *req);
int (*export)(struct skcipher_request *req, void *out);
int (*import)(struct skcipher_request *req, const void *in);
int (*init)(struct crypto_skcipher *tfm);
void (*exit)(struct crypto_skcipher *tfm);
unsigned int walksize;
union {
struct SKCIPHER_ALG_COMMON;
struct skcipher_alg_common co;
};
};
/**
* struct lskcipher_alg - linear symmetric key cipher definition
* @setkey: Set key for the transformation. This function is used to either
* program a supplied key into the hardware or store the key in the
* transformation context for programming it later. Note that this
* function does modify the transformation context. This function can
* be called multiple times during the existence of the transformation
* object, so one must make sure the key is properly reprogrammed into
* the hardware. This function is also responsible for checking the key
* length for validity. In case a software fallback was put in place in
* the @cra_init call, this function might need to use the fallback if
* the algorithm doesn't support all of the key sizes.
* @encrypt: Encrypt a number of bytes. This function is used to encrypt
* the supplied data. This function shall not modify
* the transformation context, as this function may be called
* in parallel with the same transformation object. Data
* may be left over if length is not a multiple of blocks
* and there is more to come (final == false). The number of
* left-over bytes should be returned in case of success.
* The siv field shall be as long as ivsize + statesize with
* the IV placed at the front. The state will be used by the
* algorithm internally.
* @decrypt: Decrypt a number of bytes. This is a reverse counterpart to
* @encrypt and the conditions are exactly the same.
* @init: Initialize the cryptographic transformation object. This function
* is used to initialize the cryptographic transformation object.
* This function is called only once at the instantiation time, right
* after the transformation context was allocated.
* @exit: Deinitialize the cryptographic transformation object. This is a
* counterpart to @init, used to remove various changes set in
* @init.
* @co: see struct skcipher_alg_common
*/
struct lskcipher_alg {
int (*setkey)(struct crypto_lskcipher *tfm, const u8 *key,
unsigned int keylen);
int (*encrypt)(struct crypto_lskcipher *tfm, const u8 *src,
u8 *dst, unsigned len, u8 *siv, u32 flags);
int (*decrypt)(struct crypto_lskcipher *tfm, const u8 *src,
u8 *dst, unsigned len, u8 *siv, u32 flags);
int (*init)(struct crypto_lskcipher *tfm);
void (*exit)(struct crypto_lskcipher *tfm);
struct skcipher_alg_common co;
};
#define MAX_SYNC_SKCIPHER_REQSIZE 384
/*
* This performs a type-check against the "tfm" argument to make sure
* all users have the correct skcipher tfm for doing on-stack requests.
*/
#define SYNC_SKCIPHER_REQUEST_ON_STACK(name, tfm) \
char __##name##_desc[sizeof(struct skcipher_request) + \
MAX_SYNC_SKCIPHER_REQSIZE + \
(!(sizeof((struct crypto_sync_skcipher *)1 == \
(typeof(tfm))1))) \
] CRYPTO_MINALIGN_ATTR; \
struct skcipher_request *name = (void *)__##name##_desc
/**
* DOC: Symmetric Key Cipher API
*
* Symmetric key cipher API is used with the ciphers of type
* CRYPTO_ALG_TYPE_SKCIPHER (listed as type "skcipher" in /proc/crypto).
*
* Asynchronous cipher operations imply that the function invocation for a
* cipher request returns immediately before the completion of the operation.
* The cipher request is scheduled as a separate kernel thread and therefore
* load-balanced on the different CPUs via the process scheduler. To allow
* the kernel crypto API to inform the caller about the completion of a cipher
* request, the caller must provide a callback function. That function is
* invoked with the cipher handle when the request completes.
*
* To support the asynchronous operation, additional information than just the
* cipher handle must be supplied to the kernel crypto API. That additional
* information is given by filling in the skcipher_request data structure.
*
* For the symmetric key cipher API, the state is maintained with the tfm
* cipher handle. A single tfm can be used across multiple calls and in
* parallel. For asynchronous block cipher calls, context data supplied and
* only used by the caller can be referenced the request data structure in
* addition to the IV used for the cipher request. The maintenance of such
* state information would be important for a crypto driver implementer to
* have, because when calling the callback function upon completion of the
* cipher operation, that callback function may need some information about
* which operation just finished if it invoked multiple in parallel. This
* state information is unused by the kernel crypto API.
*/
static inline struct crypto_skcipher *__crypto_skcipher_cast(
struct crypto_tfm *tfm)
{
return container_of(tfm, struct crypto_skcipher, base);
}
/**
* crypto_alloc_skcipher() - allocate symmetric key cipher handle
* @alg_name: is the cra_name / name or cra_driver_name / driver name of the
* skcipher cipher
* @type: specifies the type of the cipher
* @mask: specifies the mask for the cipher
*
* Allocate a cipher handle for an skcipher. The returned struct
* crypto_skcipher is the cipher handle that is required for any subsequent
* API invocation for that skcipher.
*
* Return: allocated cipher handle in case of success; IS_ERR() is true in case
* of an error, PTR_ERR() returns the error code.
*/
struct crypto_skcipher *crypto_alloc_skcipher(const char *alg_name,
u32 type, u32 mask);
struct crypto_sync_skcipher *crypto_alloc_sync_skcipher(const char *alg_name,
u32 type, u32 mask);
/**
* crypto_alloc_lskcipher() - allocate linear symmetric key cipher handle
* @alg_name: is the cra_name / name or cra_driver_name / driver name of the
* lskcipher
* @type: specifies the type of the cipher
* @mask: specifies the mask for the cipher
*
* Allocate a cipher handle for an lskcipher. The returned struct
* crypto_lskcipher is the cipher handle that is required for any subsequent
* API invocation for that lskcipher.
*
* Return: allocated cipher handle in case of success; IS_ERR() is true in case
* of an error, PTR_ERR() returns the error code.
*/
struct crypto_lskcipher *crypto_alloc_lskcipher(const char *alg_name,
u32 type, u32 mask);
static inline struct crypto_tfm *crypto_skcipher_tfm(
struct crypto_skcipher *tfm)
{
return &tfm->base;
}
static inline struct crypto_tfm *crypto_lskcipher_tfm(
struct crypto_lskcipher *tfm)
{
return &tfm->base;
}
/**
* crypto_free_skcipher() - zeroize and free cipher handle
* @tfm: cipher handle to be freed
*
* If @tfm is a NULL or error pointer, this function does nothing.
*/
static inline void crypto_free_skcipher(struct crypto_skcipher *tfm)
{
crypto_destroy_tfm(tfm, crypto_skcipher_tfm(tfm));
}
static inline void crypto_free_sync_skcipher(struct crypto_sync_skcipher *tfm)
{
crypto_free_skcipher(&tfm->base);
}
/**
* crypto_free_lskcipher() - zeroize and free cipher handle
* @tfm: cipher handle to be freed
*
* If @tfm is a NULL or error pointer, this function does nothing.
*/
static inline void crypto_free_lskcipher(struct crypto_lskcipher *tfm)
{
crypto_destroy_tfm(tfm, crypto_lskcipher_tfm(tfm));
}
/**
* crypto_has_skcipher() - Search for the availability of an skcipher.
* @alg_name: is the cra_name / name or cra_driver_name / driver name of the
* skcipher
* @type: specifies the type of the skcipher
* @mask: specifies the mask for the skcipher
*
* Return: true when the skcipher is known to the kernel crypto API; false
* otherwise
*/
int crypto_has_skcipher(const char *alg_name, u32 type, u32 mask);
static inline const char *crypto_skcipher_driver_name(
struct crypto_skcipher *tfm)
{
return crypto_tfm_alg_driver_name(crypto_skcipher_tfm(tfm));
}
static inline const char *crypto_lskcipher_driver_name(
struct crypto_lskcipher *tfm)
{
return crypto_tfm_alg_driver_name(crypto_lskcipher_tfm(tfm));
}
static inline struct skcipher_alg_common *crypto_skcipher_alg_common(
struct crypto_skcipher *tfm)
{
return container_of(crypto_skcipher_tfm(tfm)->__crt_alg,
struct skcipher_alg_common, base);
}
static inline struct skcipher_alg *crypto_skcipher_alg(
struct crypto_skcipher *tfm)
{
return container_of(crypto_skcipher_tfm(tfm)->__crt_alg,
struct skcipher_alg, base);
}
static inline struct lskcipher_alg *crypto_lskcipher_alg(
struct crypto_lskcipher *tfm)
{
return container_of(crypto_lskcipher_tfm(tfm)->__crt_alg,
struct lskcipher_alg, co.base);
}
/**
* crypto_skcipher_ivsize() - obtain IV size
* @tfm: cipher handle
*
* The size of the IV for the skcipher referenced by the cipher handle is
* returned. This IV size may be zero if the cipher does not need an IV.
*
* Return: IV size in bytes
*/
static inline unsigned int crypto_skcipher_ivsize(struct crypto_skcipher *tfm)
{
return crypto_skcipher_alg_common(tfm)->ivsize;
}
static inline unsigned int crypto_sync_skcipher_ivsize(
struct crypto_sync_skcipher *tfm)
{
return crypto_skcipher_ivsize(&tfm->base);
}
/**
* crypto_lskcipher_ivsize() - obtain IV size
* @tfm: cipher handle
*
* The size of the IV for the lskcipher referenced by the cipher handle is
* returned. This IV size may be zero if the cipher does not need an IV.
*
* Return: IV size in bytes
*/
static inline unsigned int crypto_lskcipher_ivsize(
struct crypto_lskcipher *tfm)
{
return crypto_lskcipher_alg(tfm)->co.ivsize;
}
/**
* crypto_skcipher_blocksize() - obtain block size of cipher
* @tfm: cipher handle
*
* The block size for the skcipher referenced with the cipher handle is
* returned. The caller may use that information to allocate appropriate
* memory for the data returned by the encryption or decryption operation
*
* Return: block size of cipher
*/
static inline unsigned int crypto_skcipher_blocksize(
struct crypto_skcipher *tfm)
{
return crypto_tfm_alg_blocksize(crypto_skcipher_tfm(tfm));
}
/**
* crypto_lskcipher_blocksize() - obtain block size of cipher
* @tfm: cipher handle
*
* The block size for the lskcipher referenced with the cipher handle is
* returned. The caller may use that information to allocate appropriate
* memory for the data returned by the encryption or decryption operation
*
* Return: block size of cipher
*/
static inline unsigned int crypto_lskcipher_blocksize(
struct crypto_lskcipher *tfm)
{
return crypto_tfm_alg_blocksize(crypto_lskcipher_tfm(tfm));
}
/**
* crypto_skcipher_chunksize() - obtain chunk size
* @tfm: cipher handle
*
* The block size is set to one for ciphers such as CTR. However,
* you still need to provide incremental updates in multiples of
* the underlying block size as the IV does not have sub-block
* granularity. This is known in this API as the chunk size.
*
* Return: chunk size in bytes
*/
static inline unsigned int crypto_skcipher_chunksize(
struct crypto_skcipher *tfm)
{
return crypto_skcipher_alg_common(tfm)->chunksize;
}
/**
* crypto_lskcipher_chunksize() - obtain chunk size
* @tfm: cipher handle
*
* The block size is set to one for ciphers such as CTR. However,
* you still need to provide incremental updates in multiples of
* the underlying block size as the IV does not have sub-block
* granularity. This is known in this API as the chunk size.
*
* Return: chunk size in bytes
*/
static inline unsigned int crypto_lskcipher_chunksize(
struct crypto_lskcipher *tfm)
{
return crypto_lskcipher_alg(tfm)->co.chunksize;
}
/**
* crypto_skcipher_statesize() - obtain state size
* @tfm: cipher handle
*
* Some algorithms cannot be chained with the IV alone. They carry
* internal state which must be replicated if data is to be processed
* incrementally. The size of that state can be obtained with this
* function.
*
* Return: state size in bytes
*/
static inline unsigned int crypto_skcipher_statesize(
struct crypto_skcipher *tfm)
{
return crypto_skcipher_alg_common(tfm)->statesize;
}
/**
* crypto_lskcipher_statesize() - obtain state size
* @tfm: cipher handle
*
* Some algorithms cannot be chained with the IV alone. They carry
* internal state which must be replicated if data is to be processed
* incrementally. The size of that state can be obtained with this
* function.
*
* Return: state size in bytes
*/
static inline unsigned int crypto_lskcipher_statesize(
struct crypto_lskcipher *tfm)
{
return crypto_lskcipher_alg(tfm)->co.statesize;
}
static inline unsigned int crypto_sync_skcipher_blocksize(
struct crypto_sync_skcipher *tfm)
{
return crypto_skcipher_blocksize(&tfm->base);
}
static inline unsigned int crypto_skcipher_alignmask(
struct crypto_skcipher *tfm)
{
return crypto_tfm_alg_alignmask(crypto_skcipher_tfm(tfm));
}
static inline unsigned int crypto_lskcipher_alignmask(
struct crypto_lskcipher *tfm)
{
return crypto_tfm_alg_alignmask(crypto_lskcipher_tfm(tfm));
}
static inline u32 crypto_skcipher_get_flags(struct crypto_skcipher *tfm)
{
return crypto_tfm_get_flags(crypto_skcipher_tfm(tfm));
}
static inline void crypto_skcipher_set_flags(struct crypto_skcipher *tfm,
u32 flags)
{
crypto_tfm_set_flags(crypto_skcipher_tfm(tfm), flags);
}
static inline void crypto_skcipher_clear_flags(struct crypto_skcipher *tfm,
u32 flags)
{
crypto_tfm_clear_flags(crypto_skcipher_tfm(tfm), flags);
}
static inline u32 crypto_sync_skcipher_get_flags(
struct crypto_sync_skcipher *tfm)
{
return crypto_skcipher_get_flags(&tfm->base);
}
static inline void crypto_sync_skcipher_set_flags(
struct crypto_sync_skcipher *tfm, u32 flags)
{
crypto_skcipher_set_flags(&tfm->base, flags);
}
static inline void crypto_sync_skcipher_clear_flags(
struct crypto_sync_skcipher *tfm, u32 flags)
{
crypto_skcipher_clear_flags(&tfm->base, flags);
}
static inline u32 crypto_lskcipher_get_flags(struct crypto_lskcipher *tfm)
{
return crypto_tfm_get_flags(crypto_lskcipher_tfm(tfm));
}
static inline void crypto_lskcipher_set_flags(struct crypto_lskcipher *tfm,
u32 flags)
{
crypto_tfm_set_flags(crypto_lskcipher_tfm(tfm), flags);
}
static inline void crypto_lskcipher_clear_flags(struct crypto_lskcipher *tfm,
u32 flags)
{
crypto_tfm_clear_flags(crypto_lskcipher_tfm(tfm), flags);
}
/**
* crypto_skcipher_setkey() - set key for cipher
* @tfm: cipher handle
* @key: buffer holding the key
* @keylen: length of the key in bytes
*
* The caller provided key is set for the skcipher referenced by the cipher
* handle.
*
* Note, the key length determines the cipher type. Many block ciphers implement
* different cipher modes depending on the key size, such as AES-128 vs AES-192
* vs. AES-256. When providing a 16 byte key for an AES cipher handle, AES-128
* is performed.
*
* Return: 0 if the setting of the key was successful; < 0 if an error occurred
*/
int crypto_skcipher_setkey(struct crypto_skcipher *tfm,
const u8 *key, unsigned int keylen);
static inline int crypto_sync_skcipher_setkey(struct crypto_sync_skcipher *tfm,
const u8 *key, unsigned int keylen)
{
return crypto_skcipher_setkey(&tfm->base, key, keylen);
}
/**
* crypto_lskcipher_setkey() - set key for cipher
* @tfm: cipher handle
* @key: buffer holding the key
* @keylen: length of the key in bytes
*
* The caller provided key is set for the lskcipher referenced by the cipher
* handle.
*
* Note, the key length determines the cipher type. Many block ciphers implement
* different cipher modes depending on the key size, such as AES-128 vs AES-192
* vs. AES-256. When providing a 16 byte key for an AES cipher handle, AES-128
* is performed.
*
* Return: 0 if the setting of the key was successful; < 0 if an error occurred
*/
int crypto_lskcipher_setkey(struct crypto_lskcipher *tfm,
const u8 *key, unsigned int keylen);
static inline unsigned int crypto_skcipher_min_keysize(
struct crypto_skcipher *tfm)
{
return crypto_skcipher_alg_common(tfm)->min_keysize;
}
static inline unsigned int crypto_skcipher_max_keysize(
struct crypto_skcipher *tfm)
{
return crypto_skcipher_alg_common(tfm)->max_keysize;
}
static inline unsigned int crypto_lskcipher_min_keysize(
struct crypto_lskcipher *tfm)
{
return crypto_lskcipher_alg(tfm)->co.min_keysize;
}
static inline unsigned int crypto_lskcipher_max_keysize(
struct crypto_lskcipher *tfm)
{
return crypto_lskcipher_alg(tfm)->co.max_keysize;
}
/**
* crypto_skcipher_reqtfm() - obtain cipher handle from request
* @req: skcipher_request out of which the cipher handle is to be obtained
*
* Return the crypto_skcipher handle when furnishing an skcipher_request
* data structure.
*
* Return: crypto_skcipher handle
*/
static inline struct crypto_skcipher *crypto_skcipher_reqtfm(
struct skcipher_request *req)
{
return __crypto_skcipher_cast(req->base.tfm);
}
static inline struct crypto_sync_skcipher *crypto_sync_skcipher_reqtfm(
struct skcipher_request *req)
{
struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
return container_of(tfm, struct crypto_sync_skcipher, base);
}
/**
* crypto_skcipher_encrypt() - encrypt plaintext
* @req: reference to the skcipher_request handle that holds all information
* needed to perform the cipher operation
*
* Encrypt plaintext data using the skcipher_request handle. That data
* structure and how it is filled with data is discussed with the
* skcipher_request_* functions.
*
* Return: 0 if the cipher operation was successful; < 0 if an error occurred
*/
int crypto_skcipher_encrypt(struct skcipher_request *req);
/**
* crypto_skcipher_decrypt() - decrypt ciphertext
* @req: reference to the skcipher_request handle that holds all information
* needed to perform the cipher operation
*
* Decrypt ciphertext data using the skcipher_request handle. That data
* structure and how it is filled with data is discussed with the
* skcipher_request_* functions.
*
* Return: 0 if the cipher operation was successful; < 0 if an error occurred
*/
int crypto_skcipher_decrypt(struct skcipher_request *req);
/**
* crypto_skcipher_export() - export partial state
* @req: reference to the skcipher_request handle that holds all information
* needed to perform the operation
* @out: output buffer of sufficient size that can hold the state
*
* Export partial state of the transformation. This function dumps the
* entire state of the ongoing transformation into a provided block of
* data so it can be @import 'ed back later on. This is useful in case
* you want to save partial result of the transformation after
* processing certain amount of data and reload this partial result
* multiple times later on for multiple re-use. No data processing
* happens at this point.
*
* Return: 0 if the cipher operation was successful; < 0 if an error occurred
*/
int crypto_skcipher_export(struct skcipher_request *req, void *out);
/**
* crypto_skcipher_import() - import partial state
* @req: reference to the skcipher_request handle that holds all information
* needed to perform the operation
* @in: buffer holding the state
*
* Import partial state of the transformation. This function loads the
* entire state of the ongoing transformation from a provided block of
* data so the transformation can continue from this point onward. No
* data processing happens at this point.
*
* Return: 0 if the cipher operation was successful; < 0 if an error occurred
*/
int crypto_skcipher_import(struct skcipher_request *req, const void *in);
/**
* crypto_lskcipher_encrypt() - encrypt plaintext
* @tfm: lskcipher handle
* @src: source buffer
* @dst: destination buffer
* @len: number of bytes to process
* @siv: IV + state for the cipher operation. The length of the IV must
* comply with the IV size defined by crypto_lskcipher_ivsize. The
* IV is then followed with a buffer with the length as specified by
* crypto_lskcipher_statesize.
* Encrypt plaintext data using the lskcipher handle.
*
* Return: >=0 if the cipher operation was successful, if positive
* then this many bytes have been left unprocessed;
* < 0 if an error occurred
*/
int crypto_lskcipher_encrypt(struct crypto_lskcipher *tfm, const u8 *src,
u8 *dst, unsigned len, u8 *siv);
/**
* crypto_lskcipher_decrypt() - decrypt ciphertext
* @tfm: lskcipher handle
* @src: source buffer
* @dst: destination buffer
* @len: number of bytes to process
* @siv: IV + state for the cipher operation. The length of the IV must
* comply with the IV size defined by crypto_lskcipher_ivsize. The
* IV is then followed with a buffer with the length as specified by
* crypto_lskcipher_statesize.
*
* Decrypt ciphertext data using the lskcipher handle.
*
* Return: >=0 if the cipher operation was successful, if positive
* then this many bytes have been left unprocessed;
* < 0 if an error occurred
*/
int crypto_lskcipher_decrypt(struct crypto_lskcipher *tfm, const u8 *src,
u8 *dst, unsigned len, u8 *siv);
/**
* DOC: Symmetric Key Cipher Request Handle
*
* The skcipher_request data structure contains all pointers to data
* required for the symmetric key cipher operation. This includes the cipher
* handle (which can be used by multiple skcipher_request instances), pointer
* to plaintext and ciphertext, asynchronous callback function, etc. It acts
* as a handle to the skcipher_request_* API calls in a similar way as
* skcipher handle to the crypto_skcipher_* API calls.
*/
/**
* crypto_skcipher_reqsize() - obtain size of the request data structure
* @tfm: cipher handle
*
* Return: number of bytes
*/
static inline unsigned int crypto_skcipher_reqsize(struct crypto_skcipher *tfm)
{
return tfm->reqsize;
}
/**
* skcipher_request_set_tfm() - update cipher handle reference in request
* @req: request handle to be modified
* @tfm: cipher handle that shall be added to the request handle
*
* Allow the caller to replace the existing skcipher handle in the request
* data structure with a different one.
*/
static inline void skcipher_request_set_tfm(struct skcipher_request *req,
struct crypto_skcipher *tfm)
{
req->base.tfm = crypto_skcipher_tfm(tfm);
}
static inline void skcipher_request_set_sync_tfm(struct skcipher_request *req,
struct crypto_sync_skcipher *tfm)
{
skcipher_request_set_tfm(req, &tfm->base);
}
static inline struct skcipher_request *skcipher_request_cast(
struct crypto_async_request *req)
{
return container_of(req, struct skcipher_request, base);
}
/**
* skcipher_request_alloc() - allocate request data structure
* @tfm: cipher handle to be registered with the request
* @gfp: memory allocation flag that is handed to kmalloc by the API call.
*
* Allocate the request data structure that must be used with the skcipher
* encrypt and decrypt API calls. During the allocation, the provided skcipher
* handle is registered in the request data structure.
*
* Return: allocated request handle in case of success, or NULL if out of memory
*/
static inline struct skcipher_request *skcipher_request_alloc(
struct crypto_skcipher *tfm, gfp_t gfp)
{
struct skcipher_request *req;
req = kmalloc(sizeof(struct skcipher_request) +
crypto_skcipher_reqsize(tfm), gfp);
if (likely(req))
skcipher_request_set_tfm(req, tfm);
return req;
}
/**
* skcipher_request_free() - zeroize and free request data structure
* @req: request data structure cipher handle to be freed
*/
static inline void skcipher_request_free(struct skcipher_request *req)
{
kfree_sensitive(req);
}
static inline void skcipher_request_zero(struct skcipher_request *req)
{
struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
memzero_explicit(req, sizeof(*req) + crypto_skcipher_reqsize(tfm));
}
/**
* skcipher_request_set_callback() - set asynchronous callback function
* @req: request handle
* @flags: specify zero or an ORing of the flags
* CRYPTO_TFM_REQ_MAY_BACKLOG the request queue may back log and
* increase the wait queue beyond the initial maximum size;
* CRYPTO_TFM_REQ_MAY_SLEEP the request processing may sleep
* @compl: callback function pointer to be registered with the request handle
* @data: The data pointer refers to memory that is not used by the kernel
* crypto API, but provided to the callback function for it to use. Here,
* the caller can provide a reference to memory the callback function can
* operate on. As the callback function is invoked asynchronously to the
* related functionality, it may need to access data structures of the
* related functionality which can be referenced using this pointer. The
* callback function can access the memory via the "data" field in the
* crypto_async_request data structure provided to the callback function.
*
* This function allows setting the callback function that is triggered once the
* cipher operation completes.
*
* The callback function is registered with the skcipher_request handle and
* must comply with the following template::
*
* void callback_function(struct crypto_async_request *req, int error)
*/
static inline void skcipher_request_set_callback(struct skcipher_request *req,
u32 flags,
crypto_completion_t compl,
void *data)
{
req->base.complete = compl;
req->base.data = data;
req->base.flags = flags;
}
/**
* skcipher_request_set_crypt() - set data buffers
* @req: request handle
* @src: source scatter / gather list
* @dst: destination scatter / gather list
* @cryptlen: number of bytes to process from @src
* @iv: IV for the cipher operation which must comply with the IV size defined
* by crypto_skcipher_ivsize
*
* This function allows setting of the source data and destination data
* scatter / gather lists.
*
* For encryption, the source is treated as the plaintext and the
* destination is the ciphertext. For a decryption operation, the use is
* reversed - the source is the ciphertext and the destination is the plaintext.
*/
static inline void skcipher_request_set_crypt(
struct skcipher_request *req,
struct scatterlist *src, struct scatterlist *dst,
unsigned int cryptlen, void *iv)
{
req->src = src;
req->dst = dst;
req->cryptlen = cryptlen;
req->iv = iv;
}
#endif /* _CRYPTO_SKCIPHER_H */