arch/arm/boot/dts/am335x-netcom-plus-2xx.dts

// SPDX-License-Identifier: GPL-2.0-only
/*
 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
 */

/*
 * VScom OnRISC
 * http://www.vscom.de
 */

/dts-v1/;

#include "am335x-baltos.dtsi"
#include "am335x-baltos-leds.dtsi"

/ {
	model = "NetCom Plus";
};

&am33xx_pinmux {
	uart1_pins: pinmux_uart1_pins {
		pinctrl-single,pins = <
			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)			/* RX */
			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)			/* TX */
			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)		/* CTS */
			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)		/* RTS */
			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7)		/* DTR */
			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)		/* DSR */
			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)		/* DCD */
			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* RI */
		>;
	};

	uart2_pins: pinmux_uart2_pins {
		pinctrl-single,pins = <
			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1)		/* RX */
			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1)      		/* TX */
			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* CTS */
			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* RTS */
			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* DTR */
			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* DSR */
			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* DCD */
			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* RI */
		>;
	};
};

&usb0_phy {
	status = "okay";
};

&usb0 {
	status = "okay";
	dr_mode = "host";
};

&uart1 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart1_pins>;
	dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
	dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
	dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
	rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;

	status = "okay";
};

&uart2 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart2_pins>;
	dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
	dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
	dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
	rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;

	status = "okay";
};

&davinci_mdio {
	phy0: ethernet-phy@0 {
		reg = <1>;
	};
};

&cpsw_emac0 {
	phy-mode = "rmii";
	dual_emac_res_vlan = <1>;
	phy-handle = <&phy0>;
};

&cpsw_emac1 {
	phy-mode = "rgmii-id";
	dual_emac_res_vlan = <2>;
	phy-handle = <&phy1>;
};