| /* SPDX-License-Identifier: GPL-2.0 */ |
| /****************************************************************************** |
| * |
| * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. |
| * |
| ******************************************************************************/ |
| #ifndef __RTW_EEPROM_H__ |
| #define __RTW_EEPROM_H__ |
| |
| #include <osdep_service.h> |
| #include <drv_types.h> |
| |
| #define RTL8712_EEPROM_ID 0x8712 |
| |
| #define HWSET_MAX_SIZE_512 512 |
| #define EEPROM_MAX_SIZE HWSET_MAX_SIZE_512 |
| |
| #define CLOCK_RATE 50 /* 100us */ |
| |
| /* EEPROM opcodes */ |
| #define EEPROM_READ_OPCODE 06 |
| #define EEPROM_WRITE_OPCODE 05 |
| #define EEPROM_ERASE_OPCODE 07 |
| #define EEPROM_EWEN_OPCODE 19 /* Erase/write enable */ |
| #define EEPROM_EWDS_OPCODE 16 /* Erase/write disable */ |
| |
| /* Country codes */ |
| #define USA 0x555320 |
| #define EUROPE 0x1 /* temp, should be provided later */ |
| #define JAPAN 0x2 /* temp, should be provided later */ |
| |
| #define EEPROM_CID_DEFAULT 0x0 |
| #define EEPROM_CID_ALPHA 0x1 |
| #define EEPROM_CID_Senao 0x3 |
| #define EEPROM_CID_NetCore 0x5 |
| #define EEPROM_CID_CAMEO 0X8 |
| #define EEPROM_CID_SITECOM 0x9 |
| #define EEPROM_CID_COREGA 0xB |
| #define EEPROM_CID_EDIMAX_BELK 0xC |
| #define EEPROM_CID_SERCOMM_BELK 0xE |
| #define EEPROM_CID_CAMEO1 0xF |
| #define EEPROM_CID_WNC_COREGA 0x12 |
| #define EEPROM_CID_CLEVO 0x13 |
| #define EEPROM_CID_WHQL 0xFE |
| |
| /* Customer ID, note that: */ |
| /* This variable is initiailzed through EEPROM or registry, */ |
| /* however, its definition may be different with that in EEPROM for */ |
| /* EEPROM size consideration. So, we have to perform proper translation |
| * between them. |
| */ |
| /* Besides, CustomerID of registry has precedence of that of EEPROM. */ |
| /* defined below. 060703, by rcnjko. */ |
| enum RT_CUSTOMER_ID { |
| RT_CID_DEFAULT = 0, |
| RT_CID_8187_ALPHA0 = 1, |
| RT_CID_8187_SERCOMM_PS = 2, |
| RT_CID_8187_HW_LED = 3, |
| RT_CID_8187_NETGEAR = 4, |
| RT_CID_WHQL = 5, |
| RT_CID_819x_CAMEO = 6, |
| RT_CID_819x_RUNTOP = 7, |
| RT_CID_819x_Senao = 8, |
| RT_CID_TOSHIBA = 9, /* Merge by Jacken, 2008/01/31. */ |
| RT_CID_819x_Netcore = 10, |
| RT_CID_Nettronix = 11, |
| RT_CID_DLINK = 12, |
| RT_CID_PRONET = 13, |
| RT_CID_COREGA = 14, |
| RT_CID_CHINA_MOBILE = 15, |
| RT_CID_819x_ALPHA = 16, |
| RT_CID_819x_Sitecom = 17, |
| RT_CID_CCX = 18, /* It's set under CCX logo test and isn't demanded |
| * for CCX functions, but for test behavior like retry |
| * limit and tx report. By Bruce, 2009-02-17. |
| */ |
| RT_CID_819x_Lenovo = 19, |
| RT_CID_819x_QMI = 20, |
| RT_CID_819x_Edimax_Belkin = 21, |
| RT_CID_819x_Sercomm_Belkin = 22, |
| RT_CID_819x_CAMEO1 = 23, |
| RT_CID_819x_MSI = 24, |
| RT_CID_819x_Acer = 25, |
| RT_CID_819x_AzWave_ASUS = 26, |
| RT_CID_819x_AzWave = 27, /* For AzWave in PCIe,i |
| * The ID is AzWave use and not only Asus |
| */ |
| RT_CID_819x_HP = 28, |
| RT_CID_819x_WNC_COREGA = 29, |
| RT_CID_819x_Arcadyan_Belkin = 30, |
| RT_CID_819x_SAMSUNG = 31, |
| RT_CID_819x_CLEVO = 32, |
| RT_CID_819x_DELL = 33, |
| RT_CID_819x_PRONETS = 34, |
| RT_CID_819x_Edimax_ASUS = 35, |
| RT_CID_819x_CAMEO_NETGEAR = 36, |
| RT_CID_PLANEX = 37, |
| RT_CID_CC_C = 38, |
| RT_CID_819x_Xavi = 39, |
| RT_CID_819x_FUNAI_TV = 40, |
| RT_CID_819x_ALPHA_WD = 41, |
| }; |
| |
| struct eeprom_priv { |
| u8 bautoload_fail_flag; |
| u8 bloadfile_fail_flag; |
| u8 bloadmac_fail_flag; |
| u8 mac_addr[6]; /* PermanentAddress */ |
| u16 channel_plan; |
| u8 EepromOrEfuse; |
| u8 efuse_eeprom_data[HWSET_MAX_SIZE_512]; |
| }; |
| |
| #endif /* __RTL871X_EEPROM_H__ */ |
