blob: 95a2d2ee3c6555b7744987684d7bd4ba251964b2 [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0 */
/*
* This is part of rtl8187 OpenSource driver.
* Copyright (C) Andrea Merello 2004-2005 <andrea.merello@gmail.com>
*
* Parts of this driver are based on the GPL part of the
* official Realtek driver.
* Parts of this driver are based on the rtl8180 driver skeleton
* from Patric Schenke & Andres Salomon.
* Parts of this driver are based on the Intel Pro Wireless
* 2100 GPL driver.
*
* We want to thank the Authors of those projects
* and the Ndiswrapper project Authors.
*/
/* Mariusz Matuszek added full registers definition with Realtek's name */
/* this file contains register definitions for the rtl8187 MAC controller */
#ifndef R8192_HW
#define R8192_HW
#define RTL8187_REQT_READ 0xc0
#define RTL8187_REQT_WRITE 0x40
#define RTL8187_REQ_GET_REGS 0x05
#define RTL8187_REQ_SET_REGS 0x05
#define MAX_TX_URB 5
#define MAX_RX_URB 16
#define R8180_MAX_RETRY 255
#define RX_URB_SIZE 9100
#define RTL8190_EEPROM_ID 0x8129
#define EEPROM_VID 0x02
#define EEPROM_PID 0x04
#define EEPROM_NODE_ADDRESS_BYTE_0 0x0C
#define EEPROM_TX_POWER_DIFF 0x1F
#define EEPROM_THERMAL_METER 0x20
#define EEPROM_PW_DIFF 0x21 //0x21
#define EEPROM_CRYSTAL_CAP 0x22 //0x22
#define EEPROM_TX_PW_INDEX_CCK 0x23 //0x23
#define EEPROM_TX_PW_INDEX_OFDM_24G 0x24 //0x24~0x26
#define EEPROM_TX_PW_INDEX_CCK_V1 0x29 //0x29~0x2B
#define EEPROM_TX_PW_INDEX_OFDM_24G_V1 0x2C //0x2C~0x2E
#define EEPROM_TX_PW_INDEX_VER 0x27 //0x27
#define EEPROM_DEFAULT_THERNAL_METER 0x7
#define EEPROM_DEFAULT_PW_DIFF 0x4
#define EEPROM_DEFAULT_CRYSTAL_CAP 0x5
#define EEPROM_DEFAULT_TX_POWER 0x1010
#define EEPROM_CUSTOMER_ID 0x7B //0x7B:CustomerID
#define EEPROM_CHANNEL_PLAN 0x16 //0x7C
#define EEPROM_CID_RUNTOP 0x2
#define EEPROM_CID_DLINK 0x8
#define AC_PARAM_TXOP_LIMIT_OFFSET 16
#define AC_PARAM_ECW_MAX_OFFSET 12
#define AC_PARAM_ECW_MIN_OFFSET 8
#define AC_PARAM_AIFS_OFFSET 0
//#endif
enum _RTL8192Usb_HW {
MAC0 = 0x000,
MAC4 = 0x004,
#define BB_GLOBAL_RESET_BIT 0x1
BB_GLOBAL_RESET = 0x020, // BasebandGlobal Reset Register
BSSIDR = 0x02E, // BSSID Register
CMDR = 0x037, // Command register
#define CR_RE 0x08
#define CR_TE 0x04
SIFS = 0x03E, // SIFS register
#define TCR_MXDMA_2048 7
#define TCR_LRL_OFFSET 0
#define TCR_SRL_OFFSET 8
#define TCR_MXDMA_OFFSET 21
#define TCR_SAT BIT(24) // Enable Rate depedent ack timeout timer
RCR = 0x044, // Receive Configuration Register
#define MAC_FILTER_MASK (BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(5) | \
BIT(12) | BIT(18) | BIT(19) | BIT(20) | BIT(21) | \
BIT(22) | BIT(23))
#define RX_FIFO_THRESHOLD_MASK (BIT(13) | BIT(14) | BIT(15))
#define RX_FIFO_THRESHOLD_SHIFT 13
#define RX_FIFO_THRESHOLD_NONE 7
#define MAX_RX_DMA_MASK (BIT(8) | BIT(9) | BIT(10))
#define RCR_MXDMA_OFFSET 8
#define RCR_FIFO_OFFSET 13
#define RCR_ONLYERLPKT BIT(31) // Early Receiving based on Packet Size.
#define RCR_CBSSID BIT(23) // Accept BSSID match packet
#define RCR_APWRMGT BIT(22) // Accept power management packet
#define RCR_AMF BIT(20) // Accept management type frame
#define RCR_ACF BIT(19) // Accept control type frame
#define RCR_ADF BIT(18) // Accept data type frame
#define RCR_AICV BIT(12) // Accept ICV error packet
#define RCR_ACRC32 BIT(5) // Accept CRC32 error packet
#define RCR_AB BIT(3) // Accept broadcast packet
#define RCR_AM BIT(2) // Accept multicast packet
#define RCR_APM BIT(1) // Accept physical match packet
#define RCR_AAP BIT(0) // Accept all unicast packet
SLOT_TIME = 0x049, // Slot Time Register
ACK_TIMEOUT = 0x04c, // Ack Timeout Register
EDCAPARA_BE = 0x050, // EDCA Parameter of AC BE
EDCAPARA_BK = 0x054, // EDCA Parameter of AC BK
EDCAPARA_VO = 0x058, // EDCA Parameter of AC VO
EDCAPARA_VI = 0x05C, // EDCA Parameter of AC VI
BCN_TCFG = 0x062, // Beacon Time Configuration
#define BCN_TCFG_CW_SHIFT 8
#define BCN_TCFG_IFS 0
BCN_INTERVAL = 0x070, // Beacon Interval (TU)
ATIMWND = 0x072, // ATIM Window Size (TU)
BCN_DRV_EARLY_INT = 0x074, // Driver Early Interrupt Time (TU). Time to send interrupt to notify to change beacon content before TBTT
BCN_DMATIME = 0x076, // Beacon DMA and ATIM interrupt time (US). Indicates the time before TBTT to perform beacon queue DMA
BCN_ERR_THRESH = 0x078, // Beacon Error Threshold
RWCAM = 0x0A0, //IN 8190 Data Sheet is called CAMcmd
WCAMI = 0x0A4, // Software write CAM input content
SECR = 0x0B0, //Security Configuration Register
#define SCR_TxUseDK BIT(0) //Force Tx Use Default Key
#define SCR_RxUseDK BIT(1) //Force Rx Use Default Key
#define SCR_TxEncEnable BIT(2) //Enable Tx Encryption
#define SCR_RxDecEnable BIT(3) //Enable Rx Decryption
#define SCR_SKByA2 BIT(4) //Search kEY BY A2
#define SCR_NoSKMC BIT(5) //No Key Search for Multicast
//----------------------------------------------------------------------------
// 8190 CPU General Register (offset 0x100, 4 byte)
//----------------------------------------------------------------------------
#define CPU_CCK_LOOPBACK 0x00030000
#define CPU_GEN_SYSTEM_RESET 0x00000001
#define CPU_GEN_FIRMWARE_RESET 0x00000008
#define CPU_GEN_BOOT_RDY 0x00000010
#define CPU_GEN_FIRM_RDY 0x00000020
#define CPU_GEN_PUT_CODE_OK 0x00000080
#define CPU_GEN_BB_RST 0x00000100
#define CPU_GEN_PWR_STB_CPU 0x00000004
#define CPU_GEN_NO_LOOPBACK_MSK 0xFFF8FFFF // Set bit18,17,16 to 0. Set bit19
#define CPU_GEN_NO_LOOPBACK_SET 0x00080000 // Set BIT19 to 1
CPU_GEN = 0x100, // CPU Reset Register
AcmHwCtrl = 0x171, // ACM Hardware Control Register
//----------------------------------------------------------------------------
////
//// 8190 AcmHwCtrl bits (offset 0x171, 1 byte)
////----------------------------------------------------------------------------
//
#define AcmHw_BeqEn BIT(1)
RQPN1 = 0x180, // Reserved Queue Page Number , Vo Vi, Be, Bk
RQPN2 = 0x184, // Reserved Queue Page Number, HCCA, Cmd, Mgnt, High
RQPN3 = 0x188, // Reserved Queue Page Number, Bcn, Public,
QPNR = 0x1D0, //0x1F0, // Queue Packet Number report per TID
#define BW_OPMODE_5G BIT(1)
#define BW_OPMODE_20MHZ BIT(2)
BW_OPMODE = 0x300, // Bandwidth operation mode
MSR = 0x303, // Media Status register
#define MSR_LINK_MASK (BIT(0)|BIT(1))
#define MSR_LINK_MANAGED 2
#define MSR_LINK_NONE 0
#define MSR_LINK_SHIFT 0
#define MSR_LINK_ADHOC 1
#define MSR_LINK_MASTER 3
RETRY_LIMIT = 0x304, // Retry Limit [15:8]-short, [7:0]-long
#define RETRY_LIMIT_SHORT_SHIFT 8
#define RETRY_LIMIT_LONG_SHIFT 0
RRSR = 0x310, // Response Rate Set
#define RRSR_1M BIT(0)
#define RRSR_2M BIT(1)
#define RRSR_5_5M BIT(2)
#define RRSR_11M BIT(3)
#define RRSR_6M BIT(4)
#define RRSR_9M BIT(5)
#define RRSR_12M BIT(6)
#define RRSR_18M BIT(7)
#define RRSR_24M BIT(8)
#define RRSR_36M BIT(9)
#define RRSR_48M BIT(10)
#define RRSR_54M BIT(11)
#define BRSR_AckShortPmb BIT(23) // CCK ACK: use Short Preamble or not.
UFWP = 0x318,
RATR0 = 0x320, // Rate Adaptive Table register1
DRIVER_RSSI = 0x32c, // Driver tell Firmware current RSSI
//----------------------------------------------------------------------------
// 8190 Rate Adaptive Table Register (offset 0x320, 4 byte)
//----------------------------------------------------------------------------
//CCK
#define RATR_1M 0x00000001
#define RATR_2M 0x00000002
#define RATR_55M 0x00000004
#define RATR_11M 0x00000008
//OFDM
#define RATR_6M 0x00000010
#define RATR_9M 0x00000020
#define RATR_12M 0x00000040
#define RATR_18M 0x00000080
#define RATR_24M 0x00000100
#define RATR_36M 0x00000200
#define RATR_48M 0x00000400
#define RATR_54M 0x00000800
//MCS 1 Spatial Stream
#define RATR_MCS0 0x00001000
#define RATR_MCS1 0x00002000
#define RATR_MCS2 0x00004000
#define RATR_MCS3 0x00008000
#define RATR_MCS4 0x00010000
#define RATR_MCS5 0x00020000
#define RATR_MCS6 0x00040000
#define RATR_MCS7 0x00080000
//MCS 2 Spatial Stream
#define RATR_MCS8 0x00100000
#define RATR_MCS9 0x00200000
#define RATR_MCS10 0x00400000
#define RATR_MCS11 0x00800000
#define RATR_MCS12 0x01000000
#define RATR_MCS13 0x02000000
#define RATR_MCS14 0x04000000
#define RATR_MCS15 0x08000000
// ALL CCK Rate
#define RATE_ALL_CCK RATR_1M|RATR_2M|RATR_55M|RATR_11M
#define RATE_ALL_OFDM_AG RATR_6M|RATR_9M|RATR_12M|RATR_18M|RATR_24M\
|RATR_36M|RATR_48M|RATR_54M
#define RATE_ALL_OFDM_1SS RATR_MCS0|RATR_MCS1|RATR_MCS2|RATR_MCS3 | \
RATR_MCS4|RATR_MCS5|RATR_MCS6|RATR_MCS7
#define RATE_ALL_OFDM_2SS RATR_MCS8|RATR_MCS9 |RATR_MCS10|RATR_MCS11| \
RATR_MCS12|RATR_MCS13|RATR_MCS14|RATR_MCS15
EPROM_CMD = 0xfe58,
#define Cmd9346CR_9356SEL BIT(4)
#define EPROM_CMD_OPERATING_MODE_SHIFT 6
#define EPROM_CMD_NORMAL 0
#define EPROM_CMD_PROGRAM 2
#define EPROM_CS_BIT BIT(3)
#define EPROM_CK_BIT BIT(2)
#define EPROM_W_BIT BIT(1)
#define EPROM_R_BIT BIT(0)
};
//----------------------------------------------------------------------------
// 818xB AnaParm & AnaParm2 Register
//----------------------------------------------------------------------------
#define GPI 0x108
#endif