drivers/isdn/hardware/mISDN/hfcsusb.h - linux/kernel/git/bpf/bpf - Git at Google

 /* SPDX-License-Identifier: GPL-2.0 */
 /*
  * hfcsusb.h, HFC-S USB mISDN driver
  */

 #ifndef __HFCSUSB_H__
 #define __HFCSUSB_H__


 #define DRIVER_NAME "HFC-S_USB"

 #define DBG_HFC_CALL_TRACE	0x00010000
 #define DBG_HFC_FIFO_VERBOSE	0x00020000
 #define DBG_HFC_USB_VERBOSE	0x00100000
 #define DBG_HFC_URB_INFO	0x00200000
 #define DBG_HFC_URB_ERROR	0x00400000

 #define DEFAULT_TRANSP_BURST_SZ 128

 #define HFC_CTRL_TIMEOUT	20	/* 5ms timeout writing/reading regs */
 #define CLKDEL_TE		0x0f	/* CLKDEL in TE mode */
 #define CLKDEL_NT		0x6c	/* CLKDEL in NT mode */

 /* hfcsusb Layer1 commands */
 #define HFC_L1_ACTIVATE_TE		1
 #define HFC_L1_ACTIVATE_NT		2
 #define HFC_L1_DEACTIVATE_NT		3
 #define HFC_L1_FORCE_DEACTIVATE_TE	4

 /* cmd FLAGS in HFCUSB_STATES register */
 #define HFCUSB_LOAD_STATE	0x10
 #define HFCUSB_ACTIVATE		0x20
 #define HFCUSB_DO_ACTION	0x40
 #define HFCUSB_NT_G2_G3		0x80

 /* timers */
 #define NT_ACTIVATION_TIMER	0x01	/* enables NT mode activation Timer */
 #define NT_T1_COUNT		10

 #define MAX_BCH_SIZE		2048	/* allowed B-channel packet size */

 #define HFCUSB_RX_THRESHOLD	64	/* threshold for fifo report bit rx */
 #define HFCUSB_TX_THRESHOLD	96	/* threshold for fifo report bit tx */

 #define HFCUSB_CHIP_ID		0x16	/* Chip ID register index */
 #define HFCUSB_CIRM		0x00	/* cirm register index */
 #define HFCUSB_USB_SIZE		0x07	/* int length register */
 #define HFCUSB_USB_SIZE_I	0x06	/* iso length register */
 #define HFCUSB_F_CROSS		0x0b	/* bit order register */
 #define HFCUSB_CLKDEL		0x37	/* bit delay register */
 #define HFCUSB_CON_HDLC		0xfa	/* channel connect register */
 #define HFCUSB_HDLC_PAR		0xfb
 #define HFCUSB_SCTRL		0x31	/* S-bus control register (tx) */
 #define HFCUSB_SCTRL_E		0x32	/* same for E and special funcs */
 #define HFCUSB_SCTRL_R		0x33	/* S-bus control register (rx) */
 #define HFCUSB_F_THRES		0x0c	/* threshold register */
 #define HFCUSB_FIFO		0x0f	/* fifo select register */
 #define HFCUSB_F_USAGE		0x1a	/* fifo usage register */
 #define HFCUSB_MST_MODE0	0x14
 #define HFCUSB_MST_MODE1	0x15
 #define HFCUSB_P_DATA		0x1f
 #define HFCUSB_INC_RES_F	0x0e
 #define HFCUSB_B1_SSL		0x20
 #define HFCUSB_B2_SSL		0x21
 #define HFCUSB_B1_RSL		0x24
 #define HFCUSB_B2_RSL		0x25
 #define HFCUSB_STATES		0x30


 #define HFCUSB_CHIPID		0x40	/* ID value of HFC-S USB */

 /* fifo registers */
 #define HFCUSB_NUM_FIFOS	8	/* maximum number of fifos */
 #define HFCUSB_B1_TX		0	/* index for B1 transmit bulk/int */
 #define HFCUSB_B1_RX		1	/* index for B1 receive bulk/int */
 #define HFCUSB_B2_TX		2
 #define HFCUSB_B2_RX		3
 #define HFCUSB_D_TX		4
 #define HFCUSB_D_RX		5
 #define HFCUSB_PCM_TX		6
 #define HFCUSB_PCM_RX		7


 #define USB_INT		0
 #define USB_BULK	1
 #define USB_ISOC	2

 #define ISOC_PACKETS_D	8
 #define ISOC_PACKETS_B	8
 #define ISO_BUFFER_SIZE	128

 /* defines how much ISO packets are handled in one URB */
 static int iso_packets[8] =
 { ISOC_PACKETS_B, ISOC_PACKETS_B, ISOC_PACKETS_B, ISOC_PACKETS_B,
   ISOC_PACKETS_D, ISOC_PACKETS_D, ISOC_PACKETS_D, ISOC_PACKETS_D
 };


 /* Fifo flow Control for TX ISO */
 #define SINK_MAX	68
 #define SINK_MIN	48
 #define SINK_DMIN	12
 #define SINK_DMAX	18
 #define BITLINE_INF	(-96 * 8)

 /* HFC-S USB register access by Control-URSs */
 #define write_reg_atomic(a, b, c)					\
 	usb_control_msg((a)->dev, (a)->ctrl_out_pipe, 0, 0x40, (c), (b), \
 			0, 0, HFC_CTRL_TIMEOUT)
 #define read_reg_atomic(a, b, c)					\
 	usb_control_msg((a)->dev, (a)->ctrl_in_pipe, 1, 0xC0, 0, (b), (c), \
 			1, HFC_CTRL_TIMEOUT)
 #define HFC_CTRL_BUFSIZE 64

 struct ctrl_buf {
 	__u8 hfcs_reg;		/* register number */
 	__u8 reg_val;		/* value to be written (or read) */
 };

 /*
  * URB error codes
  * Used to represent a list of values and their respective symbolic names
  */
 struct hfcusb_symbolic_list {
 	const int num;
 	const char *name;
 };

 static struct hfcusb_symbolic_list urb_errlist[] = {
 	{-ENOMEM, "No memory for allocation of internal structures"},
 	{-ENOSPC, "The host controller's bandwidth is already consumed"},
 	{-ENOENT, "URB was canceled by unlink_urb"},
 	{-EXDEV, "ISO transfer only partially completed"},
 	{-EAGAIN, "Too match scheduled for the future"},
 	{-ENXIO, "URB already queued"},
 	{-EFBIG, "Too much ISO frames requested"},
 	{-ENOSR, "Buffer error (overrun)"},
 	{-EPIPE, "Specified endpoint is stalled (device not responding)"},
 	{-EOVERFLOW, "Babble (bad cable?)"},
 	{-EPROTO, "Bit-stuff error (bad cable?)"},
 	{-EILSEQ, "CRC/Timeout"},
 	{-ETIMEDOUT, "NAK (device does not respond)"},
 	{-ESHUTDOWN, "Device unplugged"},
 	{-1, NULL}
 };

 static inline const char *
 symbolic(struct hfcusb_symbolic_list list[], const int num)
 {
 	int i;
 	for (i = 0; list[i].name != NULL; i++)
 		if (list[i].num == num)
 			return list[i].name;
 	return "<unknown USB Error>";
 }

 /* USB descriptor need to contain one of the following EndPoint combination: */
 #define CNF_4INT3ISO	1	/* 4 INT IN, 3 ISO OUT */
 #define CNF_3INT3ISO	2	/* 3 INT IN, 3 ISO OUT */
 #define CNF_4ISO3ISO	3	/* 4 ISO IN, 3 ISO OUT */
 #define CNF_3ISO3ISO	4	/* 3 ISO IN, 3 ISO OUT */

 #define EP_NUL 1	/* Endpoint at this position not allowed */
 #define EP_NOP 2	/* all type of endpoints allowed at this position */
 #define EP_ISO 3	/* Isochron endpoint mandatory at this position */
 #define EP_BLK 4	/* Bulk endpoint mandatory at this position */
 #define EP_INT 5	/* Interrupt endpoint mandatory at this position */

 #define HFC_CHAN_B1	0
 #define HFC_CHAN_B2	1
 #define HFC_CHAN_D	2
 #define HFC_CHAN_E	3


 /*
  * List of all supported endpoint configuration sets, used to find the
  * best matching endpoint configuration within a device's USB descriptor.
  * We need at least 3 RX endpoints, and 3 TX endpoints, either
  * INT-in and ISO-out, or ISO-in and ISO-out)
  * with 4 RX endpoints even E-Channel logging is possible
  */
 static int
 validconf[][19] = {
 	/* INT in, ISO out config */
 	{EP_NUL, EP_INT, EP_NUL, EP_INT, EP_NUL, EP_INT, EP_NOP, EP_INT,
 	 EP_ISO, EP_NUL, EP_ISO, EP_NUL, EP_ISO, EP_NUL, EP_NUL, EP_NUL,
 	 CNF_4INT3ISO, 2, 1},
 	{EP_NUL, EP_INT, EP_NUL, EP_INT, EP_NUL, EP_INT, EP_NUL, EP_NUL,
 	 EP_ISO, EP_NUL, EP_ISO, EP_NUL, EP_ISO, EP_NUL, EP_NUL, EP_NUL,
 	 CNF_3INT3ISO, 2, 0},
 	/* ISO in, ISO out config */
 	{EP_NOP, EP_NOP, EP_NOP, EP_NOP, EP_NOP, EP_NOP, EP_NOP, EP_NOP,
 	 EP_ISO, EP_ISO, EP_ISO, EP_ISO, EP_ISO, EP_ISO, EP_NOP, EP_ISO,
 	 CNF_4ISO3ISO, 2, 1},
 	{EP_NUL, EP_NUL, EP_NUL, EP_NUL, EP_NUL, EP_NUL, EP_NUL, EP_NUL,
 	 EP_ISO, EP_ISO, EP_ISO, EP_ISO, EP_ISO, EP_ISO, EP_NUL, EP_NUL,
 	 CNF_3ISO3ISO, 2, 0},
 	{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} /* EOL element */
 };

 /* string description of chosen config */
 static char *conf_str[] = {
 	"4 Interrupt IN + 3 Isochron OUT",
 	"3 Interrupt IN + 3 Isochron OUT",
 	"4 Isochron IN + 3 Isochron OUT",
 	"3 Isochron IN + 3 Isochron OUT"
 };


 #define LED_OFF		0	/* no LED support */
 #define LED_SCHEME1	1	/* LED standard scheme */
 #define LED_SCHEME2	2	/* not used yet... */

 #define LED_POWER_ON	1
 #define LED_POWER_OFF	2
 #define LED_S0_ON	3
 #define LED_S0_OFF	4
 #define LED_B1_ON	5
 #define LED_B1_OFF	6
 #define LED_B1_DATA	7
 #define LED_B2_ON	8
 #define LED_B2_OFF	9
 #define LED_B2_DATA	10

 #define LED_NORMAL	0	/* LEDs are normal */
 #define LED_INVERTED	1	/* LEDs are inverted */

 /* time in ms to perform a Flashing LED when B-Channel has traffic */
 #define LED_TIME      250


 struct hfcsusb;
 struct usb_fifo;

 /* structure defining input+output fifos (interrupt/bulk mode) */
 struct iso_urb {
 	struct urb *urb;
 	__u8 buffer[ISO_BUFFER_SIZE];	/* buffer rx/tx USB URB data */
 	struct usb_fifo *owner_fifo;	/* pointer to owner fifo */
 	__u8 indx; /* Fifos's ISO double buffer 0 or 1 ? */
 #ifdef ISO_FRAME_START_DEBUG
 	int start_frames[ISO_FRAME_START_RING_COUNT];
 	__u8 iso_frm_strt_pos; /* index in start_frame[] */
 #endif
 };

 struct usb_fifo {
 	int fifonum;		/* fifo index attached to this structure */
 	int active;		/* fifo is currently active */
 	struct hfcsusb *hw;	/* pointer to main structure */
 	int pipe;		/* address of endpoint */
 	__u8 usb_packet_maxlen;	/* maximum length for usb transfer */
 	unsigned int max_size;	/* maximum size of receive/send packet */
 	__u8 intervall;		/* interrupt interval */
 	struct urb *urb;	/* transfer structure for usb routines */
 	__u8 buffer[128];	/* buffer USB INT OUT URB data */
 	int bit_line;		/* how much bits are in the fifo? */

 	__u8 usb_transfer_mode; /* switched between ISO and INT */
 	struct iso_urb	iso[2]; /* two urbs to have one always
 				   one pending */

 	struct dchannel *dch;	/* link to hfcsusb_t->dch */
 	struct bchannel *bch;	/* link to hfcsusb_t->bch */
 	struct dchannel *ech;	/* link to hfcsusb_t->ech, TODO: E-CHANNEL */
 	int last_urblen;	/* remember length of last packet */
 	__u8 stop_gracefull;	/* stops URB retransmission */
 };

 struct hfcsusb {
 	struct list_head	list;
 	struct dchannel		dch;
 	struct bchannel		bch[2];
 	struct dchannel		ech; /* TODO : wait for struct echannel ;) */

 	struct usb_device	*dev;		/* our device */
 	struct usb_interface	*intf;		/* used interface */
 	int			if_used;	/* used interface number */
 	int			alt_used;	/* used alternate config */
 	int			cfg_used;	/* configuration index used */
 	int			vend_idx;	/* index in hfcsusb_idtab */
 	int			packet_size;
 	int			iso_packet_size;
 	struct usb_fifo		fifos[HFCUSB_NUM_FIFOS];

 	/* control pipe background handling */
 	struct ctrl_buf		ctrl_buff[HFC_CTRL_BUFSIZE];
 	int			ctrl_in_idx, ctrl_out_idx, ctrl_cnt;
 	struct urb		*ctrl_urb;
 	struct usb_ctrlrequest	ctrl_write;
 	struct usb_ctrlrequest	ctrl_read;
 	int			ctrl_paksize;
 	int			ctrl_in_pipe, ctrl_out_pipe;
 	spinlock_t		ctrl_lock; /* lock for ctrl */
 	spinlock_t              lock;

 	__u8			threshold_mask;
 	__u8			led_state;

 	__u8			protocol;
 	int			nt_timer;
 	int			open;
 	__u8			timers;
 	__u8			initdone;
 	char			name[MISDN_MAX_IDLEN];
 };

 /* private vendor specific data */
 struct hfcsusb_vdata {
 	__u8		led_scheme;  /* led display scheme */
 	signed short	led_bits[8]; /* array of 8 possible LED bitmask */
 	char		*vend_name;  /* device name */
 };


 #define HFC_MAX_TE_LAYER1_STATE 8
 #define HFC_MAX_NT_LAYER1_STATE 4

 static const char *HFC_TE_LAYER1_STATES[HFC_MAX_TE_LAYER1_STATE + 1] = {
 	"TE F0 - Reset",
 	"TE F1 - Reset",
 	"TE F2 - Sensing",
 	"TE F3 - Deactivated",
 	"TE F4 - Awaiting signal",
 	"TE F5 - Identifying input",
 	"TE F6 - Synchronized",
 	"TE F7 - Activated",
 	"TE F8 - Lost framing",
 };

 static const char *HFC_NT_LAYER1_STATES[HFC_MAX_NT_LAYER1_STATE + 1] = {
 	"NT G0 - Reset",
 	"NT G1 - Deactive",
 	"NT G2 - Pending activation",
 	"NT G3 - Active",
 	"NT G4 - Pending deactivation",
 };

 /* supported devices */
 static const struct usb_device_id hfcsusb_idtab[] = {
 	{
 		USB_DEVICE(0x0959, 0x2bd0),
 		.driver_info = (unsigned long) &((struct hfcsusb_vdata)
 			{LED_OFF, {4, 0, 2, 1},
 					"ISDN USB TA (Cologne Chip HFC-S USB based)"}),
 	},
 	{
 		USB_DEVICE(0x0675, 0x1688),
 		.driver_info = (unsigned long) &((struct hfcsusb_vdata)
 			{LED_SCHEME1, {1, 2, 0, 0},
 					"DrayTek miniVigor 128 USB ISDN TA"}),
 	},
 	{
 		USB_DEVICE(0x07b0, 0x0007),
 		.driver_info = (unsigned long) &((struct hfcsusb_vdata)
 			{LED_SCHEME1, {0x80, -64, -32, -16},
 					"Billion tiny USB ISDN TA 128"}),
 	},
 	{
 		USB_DEVICE(0x0742, 0x2008),
 		.driver_info = (unsigned long) &((struct hfcsusb_vdata)
 			{LED_SCHEME1, {4, 0, 2, 1},
 					"Stollmann USB TA"}),
 	},
 	{
 		USB_DEVICE(0x0742, 0x2009),
 		.driver_info = (unsigned long) &((struct hfcsusb_vdata)
 			{LED_SCHEME1, {4, 0, 2, 1},
 					"Aceex USB ISDN TA"}),
 	},
 	{
 		USB_DEVICE(0x0742, 0x200A),
 		.driver_info = (unsigned long) &((struct hfcsusb_vdata)
 			{LED_SCHEME1, {4, 0, 2, 1},
 					"OEM USB ISDN TA"}),
 	},
 	{
 		USB_DEVICE(0x08e3, 0x0301),
 		.driver_info = (unsigned long) &((struct hfcsusb_vdata)
 			{LED_SCHEME1, {2, 0, 1, 4},
 					"Olitec USB RNIS"}),
 	},
 	{
 		USB_DEVICE(0x07fa, 0x0846),
 		.driver_info = (unsigned long) &((struct hfcsusb_vdata)
 			{LED_SCHEME1, {0x80, -64, -32, -16},
 					"Bewan Modem RNIS USB"}),
 	},
 	{
 		USB_DEVICE(0x07fa, 0x0847),
 		.driver_info = (unsigned long) &((struct hfcsusb_vdata)
 			{LED_SCHEME1, {0x80, -64, -32, -16},
 					"Djinn Numeris USB"}),
 	},
 	{
 		USB_DEVICE(0x07b0, 0x0006),
 		.driver_info = (unsigned long) &((struct hfcsusb_vdata)
 			{LED_SCHEME1, {0x80, -64, -32, -16},
 					"Twister ISDN TA"}),
 	},
 	{
 		USB_DEVICE(0x071d, 0x1005),
 		.driver_info = (unsigned long) &((struct hfcsusb_vdata)
 			{LED_SCHEME1, {0x02, 0, 0x01, 0x04},
 					"Eicon DIVA USB 4.0"}),
 	},
 	{
 		USB_DEVICE(0x0586, 0x0102),
 		.driver_info = (unsigned long) &((struct hfcsusb_vdata)
 			{LED_SCHEME1, {0x88, -64, -32, -16},
 					"ZyXEL OMNI.NET USB II"}),
 	},
 	{
 		USB_DEVICE(0x1ae7, 0x0525),
 		.driver_info = (unsigned long) &((struct hfcsusb_vdata)
 			{LED_SCHEME1, {0x88, -64, -32, -16},
 					"X-Tensions USB ISDN TA XC-525"}),
 	},
 	{ }
 };

 MODULE_DEVICE_TABLE(usb, hfcsusb_idtab);

 #endif	/* __HFCSUSB_H__ */
	/* SPDX-License-Identifier: GPL-2.0 */
	/*
	* hfcsusb.h, HFC-S USB mISDN driver
	*/

	#ifndef __HFCSUSB_H__
	#define __HFCSUSB_H__


	#define DRIVER_NAME "HFC-S_USB"

	#define DBG_HFC_CALL_TRACE 0x00010000
	#define DBG_HFC_FIFO_VERBOSE 0x00020000
	#define DBG_HFC_USB_VERBOSE 0x00100000
	#define DBG_HFC_URB_INFO 0x00200000
	#define DBG_HFC_URB_ERROR 0x00400000

	#define DEFAULT_TRANSP_BURST_SZ 128

	#define HFC_CTRL_TIMEOUT 20 /* 5ms timeout writing/reading regs */
	#define CLKDEL_TE 0x0f /* CLKDEL in TE mode */
	#define CLKDEL_NT 0x6c /* CLKDEL in NT mode */

	/* hfcsusb Layer1 commands */
	#define HFC_L1_ACTIVATE_TE 1
	#define HFC_L1_ACTIVATE_NT 2
	#define HFC_L1_DEACTIVATE_NT 3
	#define HFC_L1_FORCE_DEACTIVATE_TE 4

	/* cmd FLAGS in HFCUSB_STATES register */
	#define HFCUSB_LOAD_STATE 0x10
	#define HFCUSB_ACTIVATE 0x20
	#define HFCUSB_DO_ACTION 0x40
	#define HFCUSB_NT_G2_G3 0x80

	/* timers */
	#define NT_ACTIVATION_TIMER 0x01 /* enables NT mode activation Timer */
	#define NT_T1_COUNT 10

	#define MAX_BCH_SIZE 2048 /* allowed B-channel packet size */

	#define HFCUSB_RX_THRESHOLD 64 /* threshold for fifo report bit rx */
	#define HFCUSB_TX_THRESHOLD 96 /* threshold for fifo report bit tx */

	#define HFCUSB_CHIP_ID 0x16 /* Chip ID register index */
	#define HFCUSB_CIRM 0x00 /* cirm register index */
	#define HFCUSB_USB_SIZE 0x07 /* int length register */
	#define HFCUSB_USB_SIZE_I 0x06 /* iso length register */
	#define HFCUSB_F_CROSS 0x0b /* bit order register */
	#define HFCUSB_CLKDEL 0x37 /* bit delay register */
	#define HFCUSB_CON_HDLC 0xfa /* channel connect register */
	#define HFCUSB_HDLC_PAR 0xfb
	#define HFCUSB_SCTRL 0x31 /* S-bus control register (tx) */
	#define HFCUSB_SCTRL_E 0x32 /* same for E and special funcs */
	#define HFCUSB_SCTRL_R 0x33 /* S-bus control register (rx) */
	#define HFCUSB_F_THRES 0x0c /* threshold register */
	#define HFCUSB_FIFO 0x0f /* fifo select register */
	#define HFCUSB_F_USAGE 0x1a /* fifo usage register */
	#define HFCUSB_MST_MODE0 0x14
	#define HFCUSB_MST_MODE1 0x15
	#define HFCUSB_P_DATA 0x1f
	#define HFCUSB_INC_RES_F 0x0e
	#define HFCUSB_B1_SSL 0x20
	#define HFCUSB_B2_SSL 0x21
	#define HFCUSB_B1_RSL 0x24
	#define HFCUSB_B2_RSL 0x25
	#define HFCUSB_STATES 0x30


	#define HFCUSB_CHIPID 0x40 /* ID value of HFC-S USB */

	/* fifo registers */
	#define HFCUSB_NUM_FIFOS 8 /* maximum number of fifos */
	#define HFCUSB_B1_TX 0 /* index for B1 transmit bulk/int */
	#define HFCUSB_B1_RX 1 /* index for B1 receive bulk/int */
	#define HFCUSB_B2_TX 2
	#define HFCUSB_B2_RX 3
	#define HFCUSB_D_TX 4
	#define HFCUSB_D_RX 5
	#define HFCUSB_PCM_TX 6
	#define HFCUSB_PCM_RX 7


	#define USB_INT 0
	#define USB_BULK 1
	#define USB_ISOC 2

	#define ISOC_PACKETS_D 8
	#define ISOC_PACKETS_B 8
	#define ISO_BUFFER_SIZE 128

	/* defines how much ISO packets are handled in one URB */
	static int iso_packets[8] =
	{ ISOC_PACKETS_B, ISOC_PACKETS_B, ISOC_PACKETS_B, ISOC_PACKETS_B,
	ISOC_PACKETS_D, ISOC_PACKETS_D, ISOC_PACKETS_D, ISOC_PACKETS_D
	};


	/* Fifo flow Control for TX ISO */
	#define SINK_MAX 68
	#define SINK_MIN 48
	#define SINK_DMIN 12
	#define SINK_DMAX 18
	#define BITLINE_INF (-96 * 8)

	/* HFC-S USB register access by Control-URSs */
	#define write_reg_atomic(a, b, c) \
	usb_control_msg((a)->dev, (a)->ctrl_out_pipe, 0, 0x40, (c), (b), \
	0, 0, HFC_CTRL_TIMEOUT)
	#define read_reg_atomic(a, b, c) \
	usb_control_msg((a)->dev, (a)->ctrl_in_pipe, 1, 0xC0, 0, (b), (c), \
	1, HFC_CTRL_TIMEOUT)
	#define HFC_CTRL_BUFSIZE 64

	struct ctrl_buf {
	__u8 hfcs_reg; /* register number */
	__u8 reg_val; /* value to be written (or read) */
	};

	/*
	* URB error codes
	* Used to represent a list of values and their respective symbolic names
	*/
	struct hfcusb_symbolic_list {
	const int num;
	const char *name;
	};

	static struct hfcusb_symbolic_list urb_errlist[] = {
	{-ENOMEM, "No memory for allocation of internal structures"},
	{-ENOSPC, "The host controller's bandwidth is already consumed"},
	{-ENOENT, "URB was canceled by unlink_urb"},
	{-EXDEV, "ISO transfer only partially completed"},
	{-EAGAIN, "Too match scheduled for the future"},
	{-ENXIO, "URB already queued"},
	{-EFBIG, "Too much ISO frames requested"},
	{-ENOSR, "Buffer error (overrun)"},
	{-EPIPE, "Specified endpoint is stalled (device not responding)"},
	{-EOVERFLOW, "Babble (bad cable?)"},
	{-EPROTO, "Bit-stuff error (bad cable?)"},
	{-EILSEQ, "CRC/Timeout"},
	{-ETIMEDOUT, "NAK (device does not respond)"},
	{-ESHUTDOWN, "Device unplugged"},
	{-1, NULL}
	};

	static inline const char *
	symbolic(struct hfcusb_symbolic_list list[], const int num)
	{
	int i;
	for (i = 0; list[i].name != NULL; i++)
	if (list[i].num == num)
	return list[i].name;
	return "<unknown USB Error>";
	}

	/* USB descriptor need to contain one of the following EndPoint combination: */
	#define CNF_4INT3ISO 1 /* 4 INT IN, 3 ISO OUT */
	#define CNF_3INT3ISO 2 /* 3 INT IN, 3 ISO OUT */
	#define CNF_4ISO3ISO 3 /* 4 ISO IN, 3 ISO OUT */
	#define CNF_3ISO3ISO 4 /* 3 ISO IN, 3 ISO OUT */

	#define EP_NUL 1 /* Endpoint at this position not allowed */
	#define EP_NOP 2 /* all type of endpoints allowed at this position */
	#define EP_ISO 3 /* Isochron endpoint mandatory at this position */
	#define EP_BLK 4 /* Bulk endpoint mandatory at this position */
	#define EP_INT 5 /* Interrupt endpoint mandatory at this position */

	#define HFC_CHAN_B1 0
	#define HFC_CHAN_B2 1
	#define HFC_CHAN_D 2
	#define HFC_CHAN_E 3


	/*
	* List of all supported endpoint configuration sets, used to find the
	* best matching endpoint configuration within a device's USB descriptor.
	* We need at least 3 RX endpoints, and 3 TX endpoints, either
	* INT-in and ISO-out, or ISO-in and ISO-out)
	* with 4 RX endpoints even E-Channel logging is possible
	*/
	static int
	validconf[][19] = {
	/* INT in, ISO out config */
	{EP_NUL, EP_INT, EP_NUL, EP_INT, EP_NUL, EP_INT, EP_NOP, EP_INT,
	EP_ISO, EP_NUL, EP_ISO, EP_NUL, EP_ISO, EP_NUL, EP_NUL, EP_NUL,
	CNF_4INT3ISO, 2, 1},
	{EP_NUL, EP_INT, EP_NUL, EP_INT, EP_NUL, EP_INT, EP_NUL, EP_NUL,
	EP_ISO, EP_NUL, EP_ISO, EP_NUL, EP_ISO, EP_NUL, EP_NUL, EP_NUL,
	CNF_3INT3ISO, 2, 0},
	/* ISO in, ISO out config */
	{EP_NOP, EP_NOP, EP_NOP, EP_NOP, EP_NOP, EP_NOP, EP_NOP, EP_NOP,
	EP_ISO, EP_ISO, EP_ISO, EP_ISO, EP_ISO, EP_ISO, EP_NOP, EP_ISO,
	CNF_4ISO3ISO, 2, 1},
	{EP_NUL, EP_NUL, EP_NUL, EP_NUL, EP_NUL, EP_NUL, EP_NUL, EP_NUL,
	EP_ISO, EP_ISO, EP_ISO, EP_ISO, EP_ISO, EP_ISO, EP_NUL, EP_NUL,
	CNF_3ISO3ISO, 2, 0},
	{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} /* EOL element */
	};

	/* string description of chosen config */
	static char *conf_str[] = {
	"4 Interrupt IN + 3 Isochron OUT",
	"3 Interrupt IN + 3 Isochron OUT",
	"4 Isochron IN + 3 Isochron OUT",
	"3 Isochron IN + 3 Isochron OUT"
	};


	#define LED_OFF 0 /* no LED support */
	#define LED_SCHEME1 1 /* LED standard scheme */
	#define LED_SCHEME2 2 /* not used yet... */

	#define LED_POWER_ON 1
	#define LED_POWER_OFF 2
	#define LED_S0_ON 3
	#define LED_S0_OFF 4
	#define LED_B1_ON 5
	#define LED_B1_OFF 6
	#define LED_B1_DATA 7
	#define LED_B2_ON 8
	#define LED_B2_OFF 9
	#define LED_B2_DATA 10

	#define LED_NORMAL 0 /* LEDs are normal */
	#define LED_INVERTED 1 /* LEDs are inverted */

	/* time in ms to perform a Flashing LED when B-Channel has traffic */
	#define LED_TIME 250



	struct hfcsusb;
	struct usb_fifo;

	/* structure defining input+output fifos (interrupt/bulk mode) */
	struct iso_urb {
	struct urb *urb;
	__u8 buffer[ISO_BUFFER_SIZE]; /* buffer rx/tx USB URB data */
	struct usb_fifo owner_fifo; / pointer to owner fifo */
	__u8 indx; /* Fifos's ISO double buffer 0 or 1 ? */
	#ifdef ISO_FRAME_START_DEBUG
	int start_frames[ISO_FRAME_START_RING_COUNT];
	__u8 iso_frm_strt_pos; /* index in start_frame[] */
	#endif
	};

	struct usb_fifo {
	int fifonum; /* fifo index attached to this structure */
	int active; /* fifo is currently active */
	struct hfcsusb hw; / pointer to main structure */
	int pipe; /* address of endpoint */
	__u8 usb_packet_maxlen; /* maximum length for usb transfer */
	unsigned int max_size; /* maximum size of receive/send packet */
	__u8 intervall; /* interrupt interval */
	struct urb urb; / transfer structure for usb routines */
	__u8 buffer[128]; /* buffer USB INT OUT URB data */
	int bit_line; /* how much bits are in the fifo? */

	__u8 usb_transfer_mode; /* switched between ISO and INT */
	struct iso_urb iso[2]; /* two urbs to have one always
	one pending */

	struct dchannel dch; / link to hfcsusb_t->dch */
	struct bchannel bch; / link to hfcsusb_t->bch */
	struct dchannel ech; / link to hfcsusb_t->ech, TODO: E-CHANNEL */
	int last_urblen; /* remember length of last packet */
	__u8 stop_gracefull; /* stops URB retransmission */
	};

	struct hfcsusb {
	struct list_head list;
	struct dchannel dch;
	struct bchannel bch[2];
	struct dchannel ech; /* TODO : wait for struct echannel ;) */

	struct usb_device dev; / our device */
	struct usb_interface intf; / used interface */
	int if_used; /* used interface number */
	int alt_used; /* used alternate config */
	int cfg_used; /* configuration index used */
	int vend_idx; /* index in hfcsusb_idtab */
	int packet_size;
	int iso_packet_size;
	struct usb_fifo fifos[HFCUSB_NUM_FIFOS];

	/* control pipe background handling */
	struct ctrl_buf ctrl_buff[HFC_CTRL_BUFSIZE];
	int ctrl_in_idx, ctrl_out_idx, ctrl_cnt;
	struct urb *ctrl_urb;
	struct usb_ctrlrequest ctrl_write;
	struct usb_ctrlrequest ctrl_read;
	int ctrl_paksize;
	int ctrl_in_pipe, ctrl_out_pipe;
	spinlock_t ctrl_lock; /* lock for ctrl */
	spinlock_t lock;

	__u8 threshold_mask;
	__u8 led_state;

	__u8 protocol;
	int nt_timer;
	int open;
	__u8 timers;
	__u8 initdone;
	char name[MISDN_MAX_IDLEN];
	};

	/* private vendor specific data */
	struct hfcsusb_vdata {
	__u8 led_scheme; /* led display scheme */
	signed short led_bits[8]; /* array of 8 possible LED bitmask */
	char vend_name; / device name */
	};


	#define HFC_MAX_TE_LAYER1_STATE 8
	#define HFC_MAX_NT_LAYER1_STATE 4

	static const char *HFC_TE_LAYER1_STATES[HFC_MAX_TE_LAYER1_STATE + 1] = {
	"TE F0 - Reset",
	"TE F1 - Reset",
	"TE F2 - Sensing",
	"TE F3 - Deactivated",
	"TE F4 - Awaiting signal",
	"TE F5 - Identifying input",
	"TE F6 - Synchronized",
	"TE F7 - Activated",
	"TE F8 - Lost framing",
	};

	static const char *HFC_NT_LAYER1_STATES[HFC_MAX_NT_LAYER1_STATE + 1] = {
	"NT G0 - Reset",
	"NT G1 - Deactive",
	"NT G2 - Pending activation",
	"NT G3 - Active",
	"NT G4 - Pending deactivation",
	};

	/* supported devices */
	static const struct usb_device_id hfcsusb_idtab[] = {
	{
	USB_DEVICE(0x0959, 0x2bd0),
	.driver_info = (unsigned long) &((struct hfcsusb_vdata)
	{LED_OFF, {4, 0, 2, 1},
	"ISDN USB TA (Cologne Chip HFC-S USB based)"}),
	},
	{
	USB_DEVICE(0x0675, 0x1688),
	.driver_info = (unsigned long) &((struct hfcsusb_vdata)
	{LED_SCHEME1, {1, 2, 0, 0},
	"DrayTek miniVigor 128 USB ISDN TA"}),
	},
	{
	USB_DEVICE(0x07b0, 0x0007),
	.driver_info = (unsigned long) &((struct hfcsusb_vdata)
	{LED_SCHEME1, {0x80, -64, -32, -16},
	"Billion tiny USB ISDN TA 128"}),
	},
	{
	USB_DEVICE(0x0742, 0x2008),
	.driver_info = (unsigned long) &((struct hfcsusb_vdata)
	{LED_SCHEME1, {4, 0, 2, 1},
	"Stollmann USB TA"}),
	},
	{
	USB_DEVICE(0x0742, 0x2009),
	.driver_info = (unsigned long) &((struct hfcsusb_vdata)
	{LED_SCHEME1, {4, 0, 2, 1},
	"Aceex USB ISDN TA"}),
	},
	{
	USB_DEVICE(0x0742, 0x200A),
	.driver_info = (unsigned long) &((struct hfcsusb_vdata)
	{LED_SCHEME1, {4, 0, 2, 1},
	"OEM USB ISDN TA"}),
	},
	{
	USB_DEVICE(0x08e3, 0x0301),
	.driver_info = (unsigned long) &((struct hfcsusb_vdata)
	{LED_SCHEME1, {2, 0, 1, 4},
	"Olitec USB RNIS"}),
	},
	{
	USB_DEVICE(0x07fa, 0x0846),
	.driver_info = (unsigned long) &((struct hfcsusb_vdata)
	{LED_SCHEME1, {0x80, -64, -32, -16},
	"Bewan Modem RNIS USB"}),
	},
	{
	USB_DEVICE(0x07fa, 0x0847),
	.driver_info = (unsigned long) &((struct hfcsusb_vdata)
	{LED_SCHEME1, {0x80, -64, -32, -16},
	"Djinn Numeris USB"}),
	},
	{
	USB_DEVICE(0x07b0, 0x0006),
	.driver_info = (unsigned long) &((struct hfcsusb_vdata)
	{LED_SCHEME1, {0x80, -64, -32, -16},
	"Twister ISDN TA"}),
	},
	{
	USB_DEVICE(0x071d, 0x1005),
	.driver_info = (unsigned long) &((struct hfcsusb_vdata)
	{LED_SCHEME1, {0x02, 0, 0x01, 0x04},
	"Eicon DIVA USB 4.0"}),
	},
	{
	USB_DEVICE(0x0586, 0x0102),
	.driver_info = (unsigned long) &((struct hfcsusb_vdata)
	{LED_SCHEME1, {0x88, -64, -32, -16},
	"ZyXEL OMNI.NET USB II"}),
	},
	{
	USB_DEVICE(0x1ae7, 0x0525),
	.driver_info = (unsigned long) &((struct hfcsusb_vdata)
	{LED_SCHEME1, {0x88, -64, -32, -16},
	"X-Tensions USB ISDN TA XC-525"}),
	},
	{ }
	};

	MODULE_DEVICE_TABLE(usb, hfcsusb_idtab);

	#endif /* __HFCSUSB_H__ */