net: mlx4: Use scnprintf() for avoiding potential buffer overflow
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit. Fix it by replacing with scnprintf().
Cc: "David S . Miller" <davem@davemloft.net>
Cc: Tariq Toukan <tariqt@mellanox.com>
To: netdev@vger.kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/mellanox/mlx4/mcg.c b/drivers/net/ethernet/mellanox/mlx4/mcg.c
index 9c48182..9486cae 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mcg.c
+++ b/drivers/net/ethernet/mellanox/mlx4/mcg.c
@@ -906,59 +906,59 @@
int len = 0;
mlx4_err(dev, "%s", str);
- len += snprintf(buf + len, BUF_SIZE - len,
- "port = %d prio = 0x%x qp = 0x%x ",
- rule->port, rule->priority, rule->qpn);
+ len += scnprintf(buf + len, BUF_SIZE - len,
+ "port = %d prio = 0x%x qp = 0x%x ",
+ rule->port, rule->priority, rule->qpn);
list_for_each_entry(cur, &rule->list, list) {
switch (cur->id) {
case MLX4_NET_TRANS_RULE_ID_ETH:
- len += snprintf(buf + len, BUF_SIZE - len,
- "dmac = %pM ", &cur->eth.dst_mac);
+ len += scnprintf(buf + len, BUF_SIZE - len,
+ "dmac = %pM ", &cur->eth.dst_mac);
if (cur->eth.ether_type)
- len += snprintf(buf + len, BUF_SIZE - len,
- "ethertype = 0x%x ",
- be16_to_cpu(cur->eth.ether_type));
+ len += scnprintf(buf + len, BUF_SIZE - len,
+ "ethertype = 0x%x ",
+ be16_to_cpu(cur->eth.ether_type));
if (cur->eth.vlan_id)
- len += snprintf(buf + len, BUF_SIZE - len,
- "vlan-id = %d ",
- be16_to_cpu(cur->eth.vlan_id));
+ len += scnprintf(buf + len, BUF_SIZE - len,
+ "vlan-id = %d ",
+ be16_to_cpu(cur->eth.vlan_id));
break;
case MLX4_NET_TRANS_RULE_ID_IPV4:
if (cur->ipv4.src_ip)
- len += snprintf(buf + len, BUF_SIZE - len,
- "src-ip = %pI4 ",
- &cur->ipv4.src_ip);
+ len += scnprintf(buf + len, BUF_SIZE - len,
+ "src-ip = %pI4 ",
+ &cur->ipv4.src_ip);
if (cur->ipv4.dst_ip)
- len += snprintf(buf + len, BUF_SIZE - len,
- "dst-ip = %pI4 ",
- &cur->ipv4.dst_ip);
+ len += scnprintf(buf + len, BUF_SIZE - len,
+ "dst-ip = %pI4 ",
+ &cur->ipv4.dst_ip);
break;
case MLX4_NET_TRANS_RULE_ID_TCP:
case MLX4_NET_TRANS_RULE_ID_UDP:
if (cur->tcp_udp.src_port)
- len += snprintf(buf + len, BUF_SIZE - len,
- "src-port = %d ",
- be16_to_cpu(cur->tcp_udp.src_port));
+ len += scnprintf(buf + len, BUF_SIZE - len,
+ "src-port = %d ",
+ be16_to_cpu(cur->tcp_udp.src_port));
if (cur->tcp_udp.dst_port)
- len += snprintf(buf + len, BUF_SIZE - len,
- "dst-port = %d ",
- be16_to_cpu(cur->tcp_udp.dst_port));
+ len += scnprintf(buf + len, BUF_SIZE - len,
+ "dst-port = %d ",
+ be16_to_cpu(cur->tcp_udp.dst_port));
break;
case MLX4_NET_TRANS_RULE_ID_IB:
- len += snprintf(buf + len, BUF_SIZE - len,
- "dst-gid = %pI6\n", cur->ib.dst_gid);
- len += snprintf(buf + len, BUF_SIZE - len,
- "dst-gid-mask = %pI6\n",
- cur->ib.dst_gid_msk);
+ len += scnprintf(buf + len, BUF_SIZE - len,
+ "dst-gid = %pI6\n", cur->ib.dst_gid);
+ len += scnprintf(buf + len, BUF_SIZE - len,
+ "dst-gid-mask = %pI6\n",
+ cur->ib.dst_gid_msk);
break;
case MLX4_NET_TRANS_RULE_ID_VXLAN:
- len += snprintf(buf + len, BUF_SIZE - len,
- "VNID = %d ", be32_to_cpu(cur->vxlan.vni));
+ len += scnprintf(buf + len, BUF_SIZE - len,
+ "VNID = %d ", be32_to_cpu(cur->vxlan.vni));
break;
case MLX4_NET_TRANS_RULE_ID_IPV6:
break;
@@ -967,7 +967,7 @@
break;
}
}
- len += snprintf(buf + len, BUF_SIZE - len, "\n");
+ len += scnprintf(buf + len, BUF_SIZE - len, "\n");
mlx4_err(dev, "%s", buf);
if (len >= BUF_SIZE)
