include/linux/amba/pl080.h - linux/kernel/git/bpf/bpf - Git at Google

 /* SPDX-License-Identifier: GPL-2.0-only */
 /* include/linux/amba/pl080.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
  *      http://armlinux.simtec.co.uk/
  *      Ben Dooks <ben@simtec.co.uk>
  *
  * ARM PrimeCell PL080 DMA controller
 */

 /* Note, there are some Samsung updates to this controller block which
  * make it not entierly compatible with the PL080 specification from
  * ARM. When in doubt, check the Samsung documentation first.
  *
  * The Samsung defines are PL080S, and add an extra control register,
  * the ability to move more than 2^11 counts of data and some extra
  * OneNAND features.
 */

 #ifndef ASM_PL080_H
 #define ASM_PL080_H

 #define PL080_INT_STATUS			(0x00)
 #define PL080_TC_STATUS				(0x04)
 #define PL080_TC_CLEAR				(0x08)
 #define PL080_ERR_STATUS			(0x0C)
 #define PL080_ERR_CLEAR				(0x10)
 #define PL080_RAW_TC_STATUS			(0x14)
 #define PL080_RAW_ERR_STATUS			(0x18)
 #define PL080_EN_CHAN				(0x1c)
 #define PL080_SOFT_BREQ				(0x20)
 #define PL080_SOFT_SREQ				(0x24)
 #define PL080_SOFT_LBREQ			(0x28)
 #define PL080_SOFT_LSREQ			(0x2C)

 #define PL080_CONFIG				(0x30)
 #define PL080_CONFIG_M2_BE			BIT(2)
 #define PL080_CONFIG_M1_BE			BIT(1)
 #define PL080_CONFIG_ENABLE			BIT(0)

 #define PL080_SYNC				(0x34)

 /* The Faraday Technology FTDMAC020 variant registers */
 #define FTDMAC020_CH_BUSY			(0x20)
 /* Identical to PL080_CONFIG */
 #define FTDMAC020_CSR				(0x24)
 /* Identical to PL080_SYNC */
 #define FTDMAC020_SYNC				(0x2C)
 #define FTDMAC020_REVISION			(0x30)
 #define FTDMAC020_FEATURE			(0x34)

 /* Per channel configuration registers */
 #define PL080_Cx_BASE(x)			((0x100 + (x * 0x20)))
 #define PL080_CH_SRC_ADDR			(0x00)
 #define PL080_CH_DST_ADDR			(0x04)
 #define PL080_CH_LLI				(0x08)
 #define PL080_CH_CONTROL			(0x0C)
 #define PL080_CH_CONFIG				(0x10)
 #define PL080S_CH_CONTROL2			(0x10)
 #define PL080S_CH_CONFIG			(0x14)
 /* The Faraday FTDMAC020 derivative shuffles the registers around */
 #define FTDMAC020_CH_CSR			(0x00)
 #define FTDMAC020_CH_CFG			(0x04)
 #define FTDMAC020_CH_SRC_ADDR			(0x08)
 #define FTDMAC020_CH_DST_ADDR			(0x0C)
 #define FTDMAC020_CH_LLP			(0x10)
 #define FTDMAC020_CH_SIZE			(0x14)

 #define PL080_LLI_ADDR_MASK			GENMASK(31, 2)
 #define PL080_LLI_ADDR_SHIFT			(2)
 #define PL080_LLI_LM_AHB2			BIT(0)

 #define PL080_CONTROL_TC_IRQ_EN			BIT(31)
 #define PL080_CONTROL_PROT_MASK			GENMASK(30, 28)
 #define PL080_CONTROL_PROT_SHIFT		(28)
 #define PL080_CONTROL_PROT_CACHE		BIT(30)
 #define PL080_CONTROL_PROT_BUFF			BIT(29)
 #define PL080_CONTROL_PROT_SYS			BIT(28)
 #define PL080_CONTROL_DST_INCR			BIT(27)
 #define PL080_CONTROL_SRC_INCR			BIT(26)
 #define PL080_CONTROL_DST_AHB2			BIT(25)
 #define PL080_CONTROL_SRC_AHB2			BIT(24)
 #define PL080_CONTROL_DWIDTH_MASK		GENMASK(23, 21)
 #define PL080_CONTROL_DWIDTH_SHIFT		(21)
 #define PL080_CONTROL_SWIDTH_MASK		GENMASK(20, 18)
 #define PL080_CONTROL_SWIDTH_SHIFT		(18)
 #define PL080_CONTROL_DB_SIZE_MASK		GENMASK(17, 15)
 #define PL080_CONTROL_DB_SIZE_SHIFT		(15)
 #define PL080_CONTROL_SB_SIZE_MASK		GENMASK(14, 12)
 #define PL080_CONTROL_SB_SIZE_SHIFT		(12)
 #define PL080_CONTROL_TRANSFER_SIZE_MASK	GENMASK(11, 0)
 #define PL080S_CONTROL_TRANSFER_SIZE_MASK	GENMASK(24, 0)
 #define PL080_CONTROL_TRANSFER_SIZE_SHIFT	(0)

 #define PL080_BSIZE_1				(0x0)
 #define PL080_BSIZE_4				(0x1)
 #define PL080_BSIZE_8				(0x2)
 #define PL080_BSIZE_16				(0x3)
 #define PL080_BSIZE_32				(0x4)
 #define PL080_BSIZE_64				(0x5)
 #define PL080_BSIZE_128				(0x6)
 #define PL080_BSIZE_256				(0x7)

 #define PL080_WIDTH_8BIT			(0x0)
 #define PL080_WIDTH_16BIT			(0x1)
 #define PL080_WIDTH_32BIT			(0x2)

 #define PL080N_CONFIG_ITPROT			BIT(20)
 #define PL080N_CONFIG_SECPROT			BIT(19)
 #define PL080_CONFIG_HALT			BIT(18)
 #define PL080_CONFIG_ACTIVE			BIT(17)  /* RO */
 #define PL080_CONFIG_LOCK			BIT(16)
 #define PL080_CONFIG_TC_IRQ_MASK		BIT(15)
 #define PL080_CONFIG_ERR_IRQ_MASK		BIT(14)
 #define PL080_CONFIG_FLOW_CONTROL_MASK		GENMASK(13, 11)
 #define PL080_CONFIG_FLOW_CONTROL_SHIFT		(11)
 #define PL080_CONFIG_DST_SEL_MASK		GENMASK(9, 6)
 #define PL080_CONFIG_DST_SEL_SHIFT		(6)
 #define PL080_CONFIG_SRC_SEL_MASK		GENMASK(4, 1)
 #define PL080_CONFIG_SRC_SEL_SHIFT		(1)
 #define PL080_CONFIG_ENABLE			BIT(0)

 #define PL080_FLOW_MEM2MEM			(0x0)
 #define PL080_FLOW_MEM2PER			(0x1)
 #define PL080_FLOW_PER2MEM			(0x2)
 #define PL080_FLOW_SRC2DST			(0x3)
 #define PL080_FLOW_SRC2DST_DST			(0x4)
 #define PL080_FLOW_MEM2PER_PER			(0x5)
 #define PL080_FLOW_PER2MEM_PER			(0x6)
 #define PL080_FLOW_SRC2DST_SRC			(0x7)

 #define FTDMAC020_CH_CSR_TC_MSK			BIT(31)
 /* Later versions have a threshold in bits 24..26,  */
 #define FTDMAC020_CH_CSR_FIFOTH_MSK		GENMASK(26, 24)
 #define FTDMAC020_CH_CSR_FIFOTH_SHIFT		(24)
 #define FTDMAC020_CH_CSR_CHPR1_MSK		GENMASK(23, 22)
 #define FTDMAC020_CH_CSR_PROT3			BIT(21)
 #define FTDMAC020_CH_CSR_PROT2			BIT(20)
 #define FTDMAC020_CH_CSR_PROT1			BIT(19)
 #define FTDMAC020_CH_CSR_SRC_SIZE_MSK		GENMASK(18, 16)
 #define FTDMAC020_CH_CSR_SRC_SIZE_SHIFT		(16)
 #define FTDMAC020_CH_CSR_ABT			BIT(15)
 #define FTDMAC020_CH_CSR_SRC_WIDTH_MSK		GENMASK(13, 11)
 #define FTDMAC020_CH_CSR_SRC_WIDTH_SHIFT	(11)
 #define FTDMAC020_CH_CSR_DST_WIDTH_MSK		GENMASK(10, 8)
 #define FTDMAC020_CH_CSR_DST_WIDTH_SHIFT	(8)
 #define FTDMAC020_CH_CSR_MODE			BIT(7)
 /* 00 = increase, 01 = decrease, 10 = fix */
 #define FTDMAC020_CH_CSR_SRCAD_CTL_MSK		GENMASK(6, 5)
 #define FTDMAC020_CH_CSR_SRCAD_CTL_SHIFT	(5)
 #define FTDMAC020_CH_CSR_DSTAD_CTL_MSK		GENMASK(4, 3)
 #define FTDMAC020_CH_CSR_DSTAD_CTL_SHIFT	(3)
 #define FTDMAC020_CH_CSR_SRC_SEL		BIT(2)
 #define FTDMAC020_CH_CSR_DST_SEL		BIT(1)
 #define FTDMAC020_CH_CSR_EN			BIT(0)

 /* FIFO threshold setting */
 #define FTDMAC020_CH_CSR_FIFOTH_1		(0x0)
 #define FTDMAC020_CH_CSR_FIFOTH_2		(0x1)
 #define FTDMAC020_CH_CSR_FIFOTH_4		(0x2)
 #define FTDMAC020_CH_CSR_FIFOTH_8		(0x3)
 #define FTDMAC020_CH_CSR_FIFOTH_16		(0x4)
 /* The FTDMAC020 supports 64bit wide transfers */
 #define FTDMAC020_WIDTH_64BIT			(0x3)
 /* Address can be increased, decreased or fixed */
 #define FTDMAC020_CH_CSR_SRCAD_CTL_INC		(0x0)
 #define FTDMAC020_CH_CSR_SRCAD_CTL_DEC		(0x1)
 #define FTDMAC020_CH_CSR_SRCAD_CTL_FIXED	(0x2)

 #define FTDMAC020_CH_CFG_LLP_CNT_MASK		GENMASK(19, 16)
 #define FTDMAC020_CH_CFG_LLP_CNT_SHIFT		(16)
 #define FTDMAC020_CH_CFG_BUSY			BIT(8)
 #define FTDMAC020_CH_CFG_INT_ABT_MASK		BIT(2)
 #define FTDMAC020_CH_CFG_INT_ERR_MASK		BIT(1)
 #define FTDMAC020_CH_CFG_INT_TC_MASK		BIT(0)

 /* Inside the LLIs, the applicable CSR fields are mapped differently */
 #define FTDMAC020_LLI_TC_MSK			BIT(28)
 #define FTDMAC020_LLI_SRC_WIDTH_MSK		GENMASK(27, 25)
 #define FTDMAC020_LLI_SRC_WIDTH_SHIFT		(25)
 #define FTDMAC020_LLI_DST_WIDTH_MSK		GENMASK(24, 22)
 #define FTDMAC020_LLI_DST_WIDTH_SHIFT		(22)
 #define FTDMAC020_LLI_SRCAD_CTL_MSK		GENMASK(21, 20)
 #define FTDMAC020_LLI_SRCAD_CTL_SHIFT		(20)
 #define FTDMAC020_LLI_DSTAD_CTL_MSK		GENMASK(19, 18)
 #define FTDMAC020_LLI_DSTAD_CTL_SHIFT		(18)
 #define FTDMAC020_LLI_SRC_SEL			BIT(17)
 #define FTDMAC020_LLI_DST_SEL			BIT(16)
 #define FTDMAC020_LLI_TRANSFER_SIZE_MASK	GENMASK(11, 0)
 #define FTDMAC020_LLI_TRANSFER_SIZE_SHIFT	(0)

 #define FTDMAC020_CFG_LLP_CNT_MASK		GENMASK(19, 16)
 #define FTDMAC020_CFG_LLP_CNT_SHIFT		(16)
 #define FTDMAC020_CFG_BUSY			BIT(8)
 #define FTDMAC020_CFG_INT_ABT_MSK		BIT(2)
 #define FTDMAC020_CFG_INT_ERR_MSK		BIT(1)
 #define FTDMAC020_CFG_INT_TC_MSK		BIT(0)

 /* DMA linked list chain structure */

 struct pl080_lli {
 	u32	src_addr;
 	u32	dst_addr;
 	u32	next_lli;
 	u32	control0;
 };

 struct pl080s_lli {
 	u32	src_addr;
 	u32	dst_addr;
 	u32	next_lli;
 	u32	control0;
 	u32	control1;
 };

 #endif /* ASM_PL080_H */
	/* SPDX-License-Identifier: GPL-2.0-only */
	/* include/linux/amba/pl080.h
	*
	* Copyright 2008 Openmoko, Inc.
	* Copyright 2008 Simtec Electronics
	* http://armlinux.simtec.co.uk/
	* Ben Dooks <ben@simtec.co.uk>
	*
	* ARM PrimeCell PL080 DMA controller
	*/

	/* Note, there are some Samsung updates to this controller block which
	* make it not entierly compatible with the PL080 specification from
	* ARM. When in doubt, check the Samsung documentation first.
	*
	* The Samsung defines are PL080S, and add an extra control register,
	* the ability to move more than 2^11 counts of data and some extra
	* OneNAND features.
	*/

	#ifndef ASM_PL080_H
	#define ASM_PL080_H

	#define PL080_INT_STATUS (0x00)
	#define PL080_TC_STATUS (0x04)
	#define PL080_TC_CLEAR (0x08)
	#define PL080_ERR_STATUS (0x0C)
	#define PL080_ERR_CLEAR (0x10)
	#define PL080_RAW_TC_STATUS (0x14)
	#define PL080_RAW_ERR_STATUS (0x18)
	#define PL080_EN_CHAN (0x1c)
	#define PL080_SOFT_BREQ (0x20)
	#define PL080_SOFT_SREQ (0x24)
	#define PL080_SOFT_LBREQ (0x28)
	#define PL080_SOFT_LSREQ (0x2C)

	#define PL080_CONFIG (0x30)
	#define PL080_CONFIG_M2_BE BIT(2)
	#define PL080_CONFIG_M1_BE BIT(1)
	#define PL080_CONFIG_ENABLE BIT(0)

	#define PL080_SYNC (0x34)

	/* The Faraday Technology FTDMAC020 variant registers */
	#define FTDMAC020_CH_BUSY (0x20)
	/* Identical to PL080_CONFIG */
	#define FTDMAC020_CSR (0x24)
	/* Identical to PL080_SYNC */
	#define FTDMAC020_SYNC (0x2C)
	#define FTDMAC020_REVISION (0x30)
	#define FTDMAC020_FEATURE (0x34)

	/* Per channel configuration registers */
	#define PL080_Cx_BASE(x) ((0x100 + (x * 0x20)))
	#define PL080_CH_SRC_ADDR (0x00)
	#define PL080_CH_DST_ADDR (0x04)
	#define PL080_CH_LLI (0x08)
	#define PL080_CH_CONTROL (0x0C)
	#define PL080_CH_CONFIG (0x10)
	#define PL080S_CH_CONTROL2 (0x10)
	#define PL080S_CH_CONFIG (0x14)
	/* The Faraday FTDMAC020 derivative shuffles the registers around */
	#define FTDMAC020_CH_CSR (0x00)
	#define FTDMAC020_CH_CFG (0x04)
	#define FTDMAC020_CH_SRC_ADDR (0x08)
	#define FTDMAC020_CH_DST_ADDR (0x0C)
	#define FTDMAC020_CH_LLP (0x10)
	#define FTDMAC020_CH_SIZE (0x14)

	#define PL080_LLI_ADDR_MASK GENMASK(31, 2)
	#define PL080_LLI_ADDR_SHIFT (2)
	#define PL080_LLI_LM_AHB2 BIT(0)

	#define PL080_CONTROL_TC_IRQ_EN BIT(31)
	#define PL080_CONTROL_PROT_MASK GENMASK(30, 28)
	#define PL080_CONTROL_PROT_SHIFT (28)
	#define PL080_CONTROL_PROT_CACHE BIT(30)
	#define PL080_CONTROL_PROT_BUFF BIT(29)
	#define PL080_CONTROL_PROT_SYS BIT(28)
	#define PL080_CONTROL_DST_INCR BIT(27)
	#define PL080_CONTROL_SRC_INCR BIT(26)
	#define PL080_CONTROL_DST_AHB2 BIT(25)
	#define PL080_CONTROL_SRC_AHB2 BIT(24)
	#define PL080_CONTROL_DWIDTH_MASK GENMASK(23, 21)
	#define PL080_CONTROL_DWIDTH_SHIFT (21)
	#define PL080_CONTROL_SWIDTH_MASK GENMASK(20, 18)
	#define PL080_CONTROL_SWIDTH_SHIFT (18)
	#define PL080_CONTROL_DB_SIZE_MASK GENMASK(17, 15)
	#define PL080_CONTROL_DB_SIZE_SHIFT (15)
	#define PL080_CONTROL_SB_SIZE_MASK GENMASK(14, 12)
	#define PL080_CONTROL_SB_SIZE_SHIFT (12)
	#define PL080_CONTROL_TRANSFER_SIZE_MASK GENMASK(11, 0)
	#define PL080S_CONTROL_TRANSFER_SIZE_MASK GENMASK(24, 0)
	#define PL080_CONTROL_TRANSFER_SIZE_SHIFT (0)

	#define PL080_BSIZE_1 (0x0)
	#define PL080_BSIZE_4 (0x1)
	#define PL080_BSIZE_8 (0x2)
	#define PL080_BSIZE_16 (0x3)
	#define PL080_BSIZE_32 (0x4)
	#define PL080_BSIZE_64 (0x5)
	#define PL080_BSIZE_128 (0x6)
	#define PL080_BSIZE_256 (0x7)

	#define PL080_WIDTH_8BIT (0x0)
	#define PL080_WIDTH_16BIT (0x1)
	#define PL080_WIDTH_32BIT (0x2)

	#define PL080N_CONFIG_ITPROT BIT(20)
	#define PL080N_CONFIG_SECPROT BIT(19)
	#define PL080_CONFIG_HALT BIT(18)
	#define PL080_CONFIG_ACTIVE BIT(17) /* RO */
	#define PL080_CONFIG_LOCK BIT(16)
	#define PL080_CONFIG_TC_IRQ_MASK BIT(15)
	#define PL080_CONFIG_ERR_IRQ_MASK BIT(14)
	#define PL080_CONFIG_FLOW_CONTROL_MASK GENMASK(13, 11)
	#define PL080_CONFIG_FLOW_CONTROL_SHIFT (11)
	#define PL080_CONFIG_DST_SEL_MASK GENMASK(9, 6)
	#define PL080_CONFIG_DST_SEL_SHIFT (6)
	#define PL080_CONFIG_SRC_SEL_MASK GENMASK(4, 1)
	#define PL080_CONFIG_SRC_SEL_SHIFT (1)
	#define PL080_CONFIG_ENABLE BIT(0)

	#define PL080_FLOW_MEM2MEM (0x0)
	#define PL080_FLOW_MEM2PER (0x1)
	#define PL080_FLOW_PER2MEM (0x2)
	#define PL080_FLOW_SRC2DST (0x3)
	#define PL080_FLOW_SRC2DST_DST (0x4)
	#define PL080_FLOW_MEM2PER_PER (0x5)
	#define PL080_FLOW_PER2MEM_PER (0x6)
	#define PL080_FLOW_SRC2DST_SRC (0x7)

	#define FTDMAC020_CH_CSR_TC_MSK BIT(31)
	/* Later versions have a threshold in bits 24..26, */
	#define FTDMAC020_CH_CSR_FIFOTH_MSK GENMASK(26, 24)
	#define FTDMAC020_CH_CSR_FIFOTH_SHIFT (24)
	#define FTDMAC020_CH_CSR_CHPR1_MSK GENMASK(23, 22)
	#define FTDMAC020_CH_CSR_PROT3 BIT(21)
	#define FTDMAC020_CH_CSR_PROT2 BIT(20)
	#define FTDMAC020_CH_CSR_PROT1 BIT(19)
	#define FTDMAC020_CH_CSR_SRC_SIZE_MSK GENMASK(18, 16)
	#define FTDMAC020_CH_CSR_SRC_SIZE_SHIFT (16)
	#define FTDMAC020_CH_CSR_ABT BIT(15)
	#define FTDMAC020_CH_CSR_SRC_WIDTH_MSK GENMASK(13, 11)
	#define FTDMAC020_CH_CSR_SRC_WIDTH_SHIFT (11)
	#define FTDMAC020_CH_CSR_DST_WIDTH_MSK GENMASK(10, 8)
	#define FTDMAC020_CH_CSR_DST_WIDTH_SHIFT (8)
	#define FTDMAC020_CH_CSR_MODE BIT(7)
	/* 00 = increase, 01 = decrease, 10 = fix */
	#define FTDMAC020_CH_CSR_SRCAD_CTL_MSK GENMASK(6, 5)
	#define FTDMAC020_CH_CSR_SRCAD_CTL_SHIFT (5)
	#define FTDMAC020_CH_CSR_DSTAD_CTL_MSK GENMASK(4, 3)
	#define FTDMAC020_CH_CSR_DSTAD_CTL_SHIFT (3)
	#define FTDMAC020_CH_CSR_SRC_SEL BIT(2)
	#define FTDMAC020_CH_CSR_DST_SEL BIT(1)
	#define FTDMAC020_CH_CSR_EN BIT(0)

	/* FIFO threshold setting */
	#define FTDMAC020_CH_CSR_FIFOTH_1 (0x0)
	#define FTDMAC020_CH_CSR_FIFOTH_2 (0x1)
	#define FTDMAC020_CH_CSR_FIFOTH_4 (0x2)
	#define FTDMAC020_CH_CSR_FIFOTH_8 (0x3)
	#define FTDMAC020_CH_CSR_FIFOTH_16 (0x4)
	/* The FTDMAC020 supports 64bit wide transfers */
	#define FTDMAC020_WIDTH_64BIT (0x3)
	/* Address can be increased, decreased or fixed */
	#define FTDMAC020_CH_CSR_SRCAD_CTL_INC (0x0)
	#define FTDMAC020_CH_CSR_SRCAD_CTL_DEC (0x1)
	#define FTDMAC020_CH_CSR_SRCAD_CTL_FIXED (0x2)

	#define FTDMAC020_CH_CFG_LLP_CNT_MASK GENMASK(19, 16)
	#define FTDMAC020_CH_CFG_LLP_CNT_SHIFT (16)
	#define FTDMAC020_CH_CFG_BUSY BIT(8)
	#define FTDMAC020_CH_CFG_INT_ABT_MASK BIT(2)
	#define FTDMAC020_CH_CFG_INT_ERR_MASK BIT(1)
	#define FTDMAC020_CH_CFG_INT_TC_MASK BIT(0)

	/* Inside the LLIs, the applicable CSR fields are mapped differently */
	#define FTDMAC020_LLI_TC_MSK BIT(28)
	#define FTDMAC020_LLI_SRC_WIDTH_MSK GENMASK(27, 25)
	#define FTDMAC020_LLI_SRC_WIDTH_SHIFT (25)
	#define FTDMAC020_LLI_DST_WIDTH_MSK GENMASK(24, 22)
	#define FTDMAC020_LLI_DST_WIDTH_SHIFT (22)
	#define FTDMAC020_LLI_SRCAD_CTL_MSK GENMASK(21, 20)
	#define FTDMAC020_LLI_SRCAD_CTL_SHIFT (20)
	#define FTDMAC020_LLI_DSTAD_CTL_MSK GENMASK(19, 18)
	#define FTDMAC020_LLI_DSTAD_CTL_SHIFT (18)
	#define FTDMAC020_LLI_SRC_SEL BIT(17)
	#define FTDMAC020_LLI_DST_SEL BIT(16)
	#define FTDMAC020_LLI_TRANSFER_SIZE_MASK GENMASK(11, 0)
	#define FTDMAC020_LLI_TRANSFER_SIZE_SHIFT (0)

	#define FTDMAC020_CFG_LLP_CNT_MASK GENMASK(19, 16)
	#define FTDMAC020_CFG_LLP_CNT_SHIFT (16)
	#define FTDMAC020_CFG_BUSY BIT(8)
	#define FTDMAC020_CFG_INT_ABT_MSK BIT(2)
	#define FTDMAC020_CFG_INT_ERR_MSK BIT(1)
	#define FTDMAC020_CFG_INT_TC_MSK BIT(0)

	/* DMA linked list chain structure */

	struct pl080_lli {
	u32 src_addr;
	u32 dst_addr;
	u32 next_lli;
	u32 control0;
	};

	struct pl080s_lli {
	u32 src_addr;
	u32 dst_addr;
	u32 next_lli;
	u32 control0;
	u32 control1;
	};

	#endif /* ASM_PL080_H */