| /* SPDX-License-Identifier: GPL-2.0 */ |
| |
| /* Copyright (c) 2015-2018, The Linux Foundation. All rights reserved. |
| * Copyright (C) 2018-2021 Linaro Ltd. |
| */ |
| #ifndef _GSI_H_ |
| #define _GSI_H_ |
| |
| #include <linux/types.h> |
| #include <linux/spinlock.h> |
| #include <linux/mutex.h> |
| #include <linux/completion.h> |
| #include <linux/platform_device.h> |
| #include <linux/netdevice.h> |
| |
| #include "ipa_version.h" |
| |
| /* Maximum number of channels and event rings supported by the driver */ |
| #define GSI_CHANNEL_COUNT_MAX 23 |
| #define GSI_EVT_RING_COUNT_MAX 24 |
| |
| /* Maximum TLV FIFO size for a channel; 64 here is arbitrary (and high) */ |
| #define GSI_TLV_MAX 64 |
| |
| struct device; |
| struct scatterlist; |
| struct platform_device; |
| |
| struct gsi; |
| struct gsi_trans; |
| struct gsi_channel_data; |
| struct ipa_gsi_endpoint_data; |
| |
| /* Execution environment IDs */ |
| enum gsi_ee_id { |
| GSI_EE_AP = 0x0, |
| GSI_EE_MODEM = 0x1, |
| GSI_EE_UC = 0x2, |
| GSI_EE_TZ = 0x3, |
| }; |
| |
| struct gsi_ring { |
| void *virt; /* ring array base address */ |
| dma_addr_t addr; /* primarily low 32 bits used */ |
| u32 count; /* number of elements in ring */ |
| |
| /* The ring index value indicates the next "open" entry in the ring. |
| * |
| * A channel ring consists of TRE entries filled by the AP and passed |
| * to the hardware for processing. For a channel ring, the ring index |
| * identifies the next unused entry to be filled by the AP. |
| * |
| * An event ring consists of event structures filled by the hardware |
| * and passed to the AP. For event rings, the ring index identifies |
| * the next ring entry that is not known to have been filled by the |
| * hardware. |
| */ |
| u32 index; |
| }; |
| |
| /* Transactions use several resources that can be allocated dynamically |
| * but taken from a fixed-size pool. The number of elements required for |
| * the pool is limited by the total number of TREs that can be outstanding. |
| * |
| * If sufficient TREs are available to reserve for a transaction, |
| * allocation from these pools is guaranteed to succeed. Furthermore, |
| * these resources are implicitly freed whenever the TREs in the |
| * transaction they're associated with are released. |
| * |
| * The result of a pool allocation of multiple elements is always |
| * contiguous. |
| */ |
| struct gsi_trans_pool { |
| void *base; /* base address of element pool */ |
| u32 count; /* # elements in the pool */ |
| u32 free; /* next free element in pool (modulo) */ |
| u32 size; /* size (bytes) of an element */ |
| u32 max_alloc; /* max allocation request */ |
| dma_addr_t addr; /* DMA address if DMA pool (or 0) */ |
| }; |
| |
| struct gsi_trans_info { |
| atomic_t tre_avail; /* TREs available for allocation */ |
| struct gsi_trans_pool pool; /* transaction pool */ |
| struct gsi_trans_pool sg_pool; /* scatterlist pool */ |
| struct gsi_trans_pool cmd_pool; /* command payload DMA pool */ |
| struct gsi_trans_pool info_pool;/* command information pool */ |
| struct gsi_trans **map; /* TRE -> transaction map */ |
| |
| spinlock_t spinlock; /* protects updates to the lists */ |
| struct list_head alloc; /* allocated, not committed */ |
| struct list_head pending; /* committed, awaiting completion */ |
| struct list_head complete; /* completed, awaiting poll */ |
| struct list_head polled; /* returned by gsi_channel_poll_one() */ |
| }; |
| |
| /* Hardware values signifying the state of a channel */ |
| enum gsi_channel_state { |
| GSI_CHANNEL_STATE_NOT_ALLOCATED = 0x0, |
| GSI_CHANNEL_STATE_ALLOCATED = 0x1, |
| GSI_CHANNEL_STATE_STARTED = 0x2, |
| GSI_CHANNEL_STATE_STOPPED = 0x3, |
| GSI_CHANNEL_STATE_STOP_IN_PROC = 0x4, |
| GSI_CHANNEL_STATE_ERROR = 0xf, |
| }; |
| |
| /* We only care about channels between IPA and AP */ |
| struct gsi_channel { |
| struct gsi *gsi; |
| bool toward_ipa; |
| bool command; /* AP command TX channel or not */ |
| |
| u8 tlv_count; /* # entries in TLV FIFO */ |
| u16 tre_count; |
| u16 event_count; |
| |
| struct completion completion; /* signals channel command completion */ |
| |
| struct gsi_ring tre_ring; |
| u32 evt_ring_id; |
| |
| u64 byte_count; /* total # bytes transferred */ |
| u64 trans_count; /* total # transactions */ |
| /* The following counts are used only for TX endpoints */ |
| u64 queued_byte_count; /* last reported queued byte count */ |
| u64 queued_trans_count; /* ...and queued trans count */ |
| u64 compl_byte_count; /* last reported completed byte count */ |
| u64 compl_trans_count; /* ...and completed trans count */ |
| |
| struct gsi_trans_info trans_info; |
| |
| struct napi_struct napi; |
| }; |
| |
| /* Hardware values signifying the state of an event ring */ |
| enum gsi_evt_ring_state { |
| GSI_EVT_RING_STATE_NOT_ALLOCATED = 0x0, |
| GSI_EVT_RING_STATE_ALLOCATED = 0x1, |
| GSI_EVT_RING_STATE_ERROR = 0xf, |
| }; |
| |
| struct gsi_evt_ring { |
| struct gsi_channel *channel; |
| struct completion completion; /* signals event ring state changes */ |
| struct gsi_ring ring; |
| }; |
| |
| struct gsi { |
| struct device *dev; /* Same as IPA device */ |
| enum ipa_version version; |
| struct net_device dummy_dev; /* needed for NAPI */ |
| void __iomem *virt_raw; /* I/O mapped address range */ |
| void __iomem *virt; /* Adjusted for most registers */ |
| u32 irq; |
| u32 channel_count; |
| u32 evt_ring_count; |
| struct gsi_channel channel[GSI_CHANNEL_COUNT_MAX]; |
| struct gsi_evt_ring evt_ring[GSI_EVT_RING_COUNT_MAX]; |
| u32 event_bitmap; /* allocated event rings */ |
| u32 modem_channel_bitmap; /* modem channels to allocate */ |
| u32 type_enabled_bitmap; /* GSI IRQ types enabled */ |
| u32 ieob_enabled_bitmap; /* IEOB IRQ enabled (event rings) */ |
| struct completion completion; /* for global EE commands */ |
| int result; /* Negative errno (generic commands) */ |
| struct mutex mutex; /* protects commands, programming */ |
| }; |
| |
| /** |
| * gsi_setup() - Set up the GSI subsystem |
| * @gsi: Address of GSI structure embedded in an IPA structure |
| * |
| * Return: 0 if successful, or a negative error code |
| * |
| * Performs initialization that must wait until the GSI hardware is |
| * ready (including firmware loaded). |
| */ |
| int gsi_setup(struct gsi *gsi); |
| |
| /** |
| * gsi_teardown() - Tear down GSI subsystem |
| * @gsi: GSI address previously passed to a successful gsi_setup() call |
| */ |
| void gsi_teardown(struct gsi *gsi); |
| |
| /** |
| * gsi_channel_tre_max() - Channel maximum number of in-flight TREs |
| * @gsi: GSI pointer |
| * @channel_id: Channel whose limit is to be returned |
| * |
| * Return: The maximum number of TREs oustanding on the channel |
| */ |
| u32 gsi_channel_tre_max(struct gsi *gsi, u32 channel_id); |
| |
| /** |
| * gsi_channel_trans_tre_max() - Maximum TREs in a single transaction |
| * @gsi: GSI pointer |
| * @channel_id: Channel whose limit is to be returned |
| * |
| * Return: The maximum TRE count per transaction on the channel |
| */ |
| u32 gsi_channel_trans_tre_max(struct gsi *gsi, u32 channel_id); |
| |
| /** |
| * gsi_channel_start() - Start an allocated GSI channel |
| * @gsi: GSI pointer |
| * @channel_id: Channel to start |
| * |
| * Return: 0 if successful, or a negative error code |
| */ |
| int gsi_channel_start(struct gsi *gsi, u32 channel_id); |
| |
| /** |
| * gsi_channel_stop() - Stop a started GSI channel |
| * @gsi: GSI pointer returned by gsi_setup() |
| * @channel_id: Channel to stop |
| * |
| * Return: 0 if successful, or a negative error code |
| */ |
| int gsi_channel_stop(struct gsi *gsi, u32 channel_id); |
| |
| /** |
| * gsi_channel_reset() - Reset an allocated GSI channel |
| * @gsi: GSI pointer |
| * @channel_id: Channel to be reset |
| * @doorbell: Whether to (possibly) enable the doorbell engine |
| * |
| * Reset a channel and reconfigure it. The @doorbell flag indicates |
| * that the doorbell engine should be enabled if needed. |
| * |
| * GSI hardware relinquishes ownership of all pending receive buffer |
| * transactions and they will complete with their cancelled flag set. |
| */ |
| void gsi_channel_reset(struct gsi *gsi, u32 channel_id, bool doorbell); |
| |
| int gsi_channel_suspend(struct gsi *gsi, u32 channel_id, bool stop); |
| int gsi_channel_resume(struct gsi *gsi, u32 channel_id, bool start); |
| |
| /** |
| * gsi_init() - Initialize the GSI subsystem |
| * @gsi: Address of GSI structure embedded in an IPA structure |
| * @pdev: IPA platform device |
| * @version: IPA hardware version (implies GSI version) |
| * @count: Number of entries in the configuration data array |
| * @data: Endpoint and channel configuration data |
| * |
| * Return: 0 if successful, or a negative error code |
| * |
| * Early stage initialization of the GSI subsystem, performing tasks |
| * that can be done before the GSI hardware is ready to use. |
| */ |
| int gsi_init(struct gsi *gsi, struct platform_device *pdev, |
| enum ipa_version version, u32 count, |
| const struct ipa_gsi_endpoint_data *data); |
| |
| /** |
| * gsi_exit() - Exit the GSI subsystem |
| * @gsi: GSI address previously passed to a successful gsi_init() call |
| */ |
| void gsi_exit(struct gsi *gsi); |
| |
| #endif /* _GSI_H_ */ |