blob: af4969485c881e9a30d78d7d52ac20630a19c5e1 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2015 Marek Vasut <marex@denx.de>
*/
/dts-v1/;
#include "at91-sama5d4_ma5d4.dtsi"
/ {
model = "Aries/DENX MA5D4EVK";
compatible = "aries,ma5d4evk", "denx,ma5d4evk", "atmel,sama5d4", "atmel,sama5";
chosen {
stdout-path = "serial3:115200n8";
};
ahb {
usb0: gadget@400000 {
atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usba_vbus>;
status = "okay";
};
usb1: ohci@500000 {
num-ports = <3>;
atmel,vbus-gpio = <0
&pioE 11 GPIO_ACTIVE_LOW
&pioE 14 GPIO_ACTIVE_LOW
>;
status = "okay";
};
usb2: ehci@600000 {
status = "okay";
};
apb {
hlcdc: hlcdc@f0000000 {
status = "okay";
hlcdc-display-controller {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
port@0 {
hlcdc_panel_output: endpoint@0 {
reg = <0>;
remote-endpoint = <&panel_input>;
};
};
};
};
macb0: ethernet@f8020000 {
phy-mode = "rmii";
status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
};
};
usart0: serial@f802c000 {
status = "okay";
};
usart1: serial@f8030000 {
status = "okay";
};
mmc1: mmc@fc000000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
vmmc-supply = <&vcc_mmc1_reg>;
vqmmc-supply = <&vcc_3v3_reg>;
status = "okay";
slot@0 {
reg = <0>;
bus-width = <4>;
cd-gpios = <&pioE 5 0>;
};
};
adc0: adc@fc034000 {
atmel,adc-ts-wires = <4>;
atmel,adc-ts-pressure-threshold = <10000>;
};
pinctrl@fc06a000 {
board {
pinctrl_mmc1_cd: mmc1_cd {
atmel,pins = <AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
};
pinctrl_usba_vbus: usba_vbus {
atmel,pins =
<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
};
};
};
};
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&hlcdc_pwm 0 50000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
status = "okay";
};
leds {
compatible = "gpio-leds";
status = "okay";
user1 {
label = "user1";
gpios = <&pioD 28 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
user2 {
label = "user2";
gpios = <&pioD 29 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
user3 {
label = "user3";
gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};
panel: panel {
/* Actually Ampire 800480R2 */
compatible = "foxlink,fl500wvr00-a0t", "simple-panel";
backlight = <&backlight>;
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
port@0 {
#address-cells = <1>;
#size-cells = <0>;
panel_input: endpoint@0 {
reg = <0>;
remote-endpoint = <&hlcdc_panel_output>;
};
};
};
vcc_mmc1_reg: fixedregulator_mmc1 {
compatible = "regulator-fixed";
gpio = <&pioE 17 GPIO_ACTIVE_LOW>;
regulator-name = "VDD MCI1";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc_3v3_reg>;
};
};