drivers/hwmon/tc654.c - linux/kernel/git/bpf/bpf - Git at Google

 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * tc654.c - Linux kernel modules for fan speed controller
  *
  * Copyright (C) 2016 Allied Telesis Labs NZ
  */

 #include <linux/bitops.h>
 #include <linux/err.h>
 #include <linux/hwmon.h>
 #include <linux/hwmon-sysfs.h>
 #include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/jiffies.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/slab.h>
 #include <linux/util_macros.h>

 enum tc654_regs {
 	TC654_REG_RPM1 = 0x00,	/* RPM Output 1 */
 	TC654_REG_RPM2 = 0x01,	/* RPM Output 2 */
 	TC654_REG_FAN_FAULT1 = 0x02,	/* Fan Fault 1 Threshold */
 	TC654_REG_FAN_FAULT2 = 0x03,	/* Fan Fault 2 Threshold */
 	TC654_REG_CONFIG = 0x04,	/* Configuration */
 	TC654_REG_STATUS = 0x05,	/* Status */
 	TC654_REG_DUTY_CYCLE = 0x06,	/* Fan Speed Duty Cycle */
 	TC654_REG_MFR_ID = 0x07,	/* Manufacturer Identification */
 	TC654_REG_VER_ID = 0x08,	/* Version Identification */
 };

 /* Macros to easily index the registers */
 #define TC654_REG_RPM(idx)		(TC654_REG_RPM1 + (idx))
 #define TC654_REG_FAN_FAULT(idx)	(TC654_REG_FAN_FAULT1 + (idx))

 /* Config register bits */
 #define TC654_REG_CONFIG_RES		BIT(6)	/* Resolution Selection */
 #define TC654_REG_CONFIG_DUTYC		BIT(5)	/* Duty Cycle Control */
 #define TC654_REG_CONFIG_SDM		BIT(0)	/* Shutdown Mode */

 /* Status register bits */
 #define TC654_REG_STATUS_F2F		BIT(1)	/* Fan 2 Fault */
 #define TC654_REG_STATUS_F1F		BIT(0)	/* Fan 1 Fault */

 /* RPM resolution for RPM Output registers */
 #define TC654_HIGH_RPM_RESOLUTION	25	/* 25 RPM resolution */
 #define TC654_LOW_RPM_RESOLUTION	50	/* 50 RPM resolution */

 /* Convert to the fan fault RPM threshold from register value */
 #define TC654_FAN_FAULT_FROM_REG(val)	((val) * 50)	/* 50 RPM resolution */

 /* Convert to register value from the fan fault RPM threshold */
 #define TC654_FAN_FAULT_TO_REG(val)	(((val) / 50) & 0xff)

 /* Register data is read (and cached) at most once per second. */
 #define TC654_UPDATE_INTERVAL		HZ

 struct tc654_data {
 	struct i2c_client *client;

 	/* update mutex */
 	struct mutex update_lock;

 	/* tc654 register cache */
 	bool valid;
 	unsigned long last_updated;	/* in jiffies */

 	u8 rpm_output[2];	/* The fan RPM data for fans 1 and 2 is then
 				 * written to registers RPM1 and RPM2
 				 */
 	u8 fan_fault[2];	/* The Fan Fault Threshold Registers are used to
 				 * set the fan fault threshold levels for fan 1
 				 * and fan 2
 				 */
 	u8 config;	/* The Configuration Register is an 8-bit read/
 			 * writable multi-function control register
 			 *   7: Fan Fault Clear
 			 *      1 = Clear Fan Fault
 			 *      0 = Normal Operation (default)
 			 *   6: Resolution Selection for RPM Output Registers
 			 *      RPM Output Registers (RPM1 and RPM2) will be
 			 *      set for
 			 *      1 = 25 RPM (9-bit) resolution
 			 *      0 = 50 RPM (8-bit) resolution (default)
 			 *   5: Duty Cycle Control Method
 			 *      The V OUT duty cycle will be controlled via
 			 *      1 = the SMBus interface.
 			 *      0 = via the V IN analog input pin. (default)
 			 * 4,3: Fan 2 Pulses Per Rotation
 			 *      00 = 1
 			 *      01 = 2 (default)
 			 *      10 = 4
 			 *      11 = 8
 			 * 2,1: Fan 1 Pulses Per Rotation
 			 *      00 = 1
 			 *      01 = 2 (default)
 			 *      10 = 4
 			 *      11 = 8
 			 *   0: Shutdown Mode
 			 *      1 = Shutdown mode.
 			 *      0 = Normal operation. (default)
 			 */
 	u8 status;	/* The Status register provides all the information
 			 * about what is going on within the TC654/TC655
 			 * devices.
 			 * 7,6: Unimplemented, Read as '0'
 			 *   5: Over-Temperature Fault Condition
 			 *      1 = Over-Temperature condition has occurred
 			 *      0 = Normal operation. V IN is less than 2.6V
 			 *   4: RPM2 Counter Overflow
 			 *      1 = Fault condition
 			 *      0 = Normal operation
 			 *   3: RPM1 Counter Overflow
 			 *      1 = Fault condition
 			 *      0 = Normal operation
 			 *   2: V IN Input Status
 			 *      1 = V IN is open
 			 *      0 = Normal operation. voltage present at V IN
 			 *   1: Fan 2 Fault
 			 *      1 = Fault condition
 			 *      0 = Normal operation
 			 *   0: Fan 1 Fault
 			 *      1 = Fault condition
 			 *      0 = Normal operation
 			 */
 	u8 duty_cycle;	/* The DUTY_CYCLE register is a 4-bit read/
 			 * writable register used to control the duty
 			 * cycle of the V OUT output.
 			 */
 };

 /* helper to grab and cache data, at most one time per second */
 static struct tc654_data *tc654_update_client(struct device *dev)
 {
 	struct tc654_data *data = dev_get_drvdata(dev);
 	struct i2c_client *client = data->client;
 	int ret = 0;

 	mutex_lock(&data->update_lock);
 	if (time_before(jiffies, data->last_updated + TC654_UPDATE_INTERVAL) &&
 	    likely(data->valid))
 		goto out;

 	ret = i2c_smbus_read_byte_data(client, TC654_REG_RPM(0));
 	if (ret < 0)
 		goto out;
 	data->rpm_output[0] = ret;

 	ret = i2c_smbus_read_byte_data(client, TC654_REG_RPM(1));
 	if (ret < 0)
 		goto out;
 	data->rpm_output[1] = ret;

 	ret = i2c_smbus_read_byte_data(client, TC654_REG_FAN_FAULT(0));
 	if (ret < 0)
 		goto out;
 	data->fan_fault[0] = ret;

 	ret = i2c_smbus_read_byte_data(client, TC654_REG_FAN_FAULT(1));
 	if (ret < 0)
 		goto out;
 	data->fan_fault[1] = ret;

 	ret = i2c_smbus_read_byte_data(client, TC654_REG_CONFIG);
 	if (ret < 0)
 		goto out;
 	data->config = ret;

 	ret = i2c_smbus_read_byte_data(client, TC654_REG_STATUS);
 	if (ret < 0)
 		goto out;
 	data->status = ret;

 	ret = i2c_smbus_read_byte_data(client, TC654_REG_DUTY_CYCLE);
 	if (ret < 0)
 		goto out;
 	data->duty_cycle = ret & 0x0f;

 	data->last_updated = jiffies;
 	data->valid = true;
 out:
 	mutex_unlock(&data->update_lock);

 	if (ret < 0)		/* upon error, encode it in return value */
 		data = ERR_PTR(ret);

 	return data;
 }

 /*
  * sysfs attributes
  */

 static ssize_t fan_show(struct device *dev, struct device_attribute *da,
 			char *buf)
 {
 	int nr = to_sensor_dev_attr(da)->index;
 	struct tc654_data *data = tc654_update_client(dev);
 	int val;

 	if (IS_ERR(data))
 		return PTR_ERR(data);

 	if (data->config & TC654_REG_CONFIG_RES)
 		val = data->rpm_output[nr] * TC654_HIGH_RPM_RESOLUTION;
 	else
 		val = data->rpm_output[nr] * TC654_LOW_RPM_RESOLUTION;

 	return sprintf(buf, "%d\n", val);
 }

 static ssize_t fan_min_show(struct device *dev, struct device_attribute *da,
 			    char *buf)
 {
 	int nr = to_sensor_dev_attr(da)->index;
 	struct tc654_data *data = tc654_update_client(dev);

 	if (IS_ERR(data))
 		return PTR_ERR(data);

 	return sprintf(buf, "%d\n",
 		       TC654_FAN_FAULT_FROM_REG(data->fan_fault[nr]));
 }

 static ssize_t fan_min_store(struct device *dev, struct device_attribute *da,
 			     const char *buf, size_t count)
 {
 	int nr = to_sensor_dev_attr(da)->index;
 	struct tc654_data *data = dev_get_drvdata(dev);
 	struct i2c_client *client = data->client;
 	unsigned long val;
 	int ret;

 	if (kstrtoul(buf, 10, &val))
 		return -EINVAL;

 	val = clamp_val(val, 0, 12750);

 	mutex_lock(&data->update_lock);

 	data->fan_fault[nr] = TC654_FAN_FAULT_TO_REG(val);
 	ret = i2c_smbus_write_byte_data(client, TC654_REG_FAN_FAULT(nr),
 					data->fan_fault[nr]);

 	mutex_unlock(&data->update_lock);
 	return ret < 0 ? ret : count;
 }

 static ssize_t fan_alarm_show(struct device *dev, struct device_attribute *da,
 			      char *buf)
 {
 	int nr = to_sensor_dev_attr(da)->index;
 	struct tc654_data *data = tc654_update_client(dev);
 	int val;

 	if (IS_ERR(data))
 		return PTR_ERR(data);

 	if (nr == 0)
 		val = !!(data->status & TC654_REG_STATUS_F1F);
 	else
 		val = !!(data->status & TC654_REG_STATUS_F2F);

 	return sprintf(buf, "%d\n", val);
 }

 static const u8 TC654_FAN_PULSE_SHIFT[] = { 1, 3 };

 static ssize_t fan_pulses_show(struct device *dev,
 			       struct device_attribute *da, char *buf)
 {
 	int nr = to_sensor_dev_attr(da)->index;
 	struct tc654_data *data = tc654_update_client(dev);
 	u8 val;

 	if (IS_ERR(data))
 		return PTR_ERR(data);

 	val = BIT((data->config >> TC654_FAN_PULSE_SHIFT[nr]) & 0x03);
 	return sprintf(buf, "%d\n", val);
 }

 static ssize_t fan_pulses_store(struct device *dev,
 				struct device_attribute *da, const char *buf,
 				size_t count)
 {
 	int nr = to_sensor_dev_attr(da)->index;
 	struct tc654_data *data = dev_get_drvdata(dev);
 	struct i2c_client *client = data->client;
 	u8 config;
 	unsigned long val;
 	int ret;

 	if (kstrtoul(buf, 10, &val))
 		return -EINVAL;

 	switch (val) {
 	case 1:
 		config = 0;
 		break;
 	case 2:
 		config = 1;
 		break;
 	case 4:
 		config = 2;
 		break;
 	case 8:
 		config = 3;
 		break;
 	default:
 		return -EINVAL;
 	}

 	mutex_lock(&data->update_lock);

 	data->config &= ~(0x03 << TC654_FAN_PULSE_SHIFT[nr]);
 	data->config |= (config << TC654_FAN_PULSE_SHIFT[nr]);
 	ret = i2c_smbus_write_byte_data(client, TC654_REG_CONFIG, data->config);

 	mutex_unlock(&data->update_lock);
 	return ret < 0 ? ret : count;
 }

 static ssize_t pwm_mode_show(struct device *dev, struct device_attribute *da,
 			     char *buf)
 {
 	struct tc654_data *data = tc654_update_client(dev);

 	if (IS_ERR(data))
 		return PTR_ERR(data);

 	return sprintf(buf, "%d\n", !!(data->config & TC654_REG_CONFIG_DUTYC));
 }

 static ssize_t pwm_mode_store(struct device *dev, struct device_attribute *da,
 			      const char *buf, size_t count)
 {
 	struct tc654_data *data = dev_get_drvdata(dev);
 	struct i2c_client *client = data->client;
 	unsigned long val;
 	int ret;

 	if (kstrtoul(buf, 10, &val))
 		return -EINVAL;

 	if (val != 0 && val != 1)
 		return -EINVAL;

 	mutex_lock(&data->update_lock);

 	if (val)
 		data->config |= TC654_REG_CONFIG_DUTYC;
 	else
 		data->config &= ~TC654_REG_CONFIG_DUTYC;

 	ret = i2c_smbus_write_byte_data(client, TC654_REG_CONFIG, data->config);

 	mutex_unlock(&data->update_lock);
 	return ret < 0 ? ret : count;
 }

 static const int tc654_pwm_map[16] = { 77,  88, 102, 112, 124, 136, 148, 160,
 				      172, 184, 196, 207, 219, 231, 243, 255};

 static ssize_t pwm_show(struct device *dev, struct device_attribute *da,
 			char *buf)
 {
 	struct tc654_data *data = tc654_update_client(dev);
 	int pwm;

 	if (IS_ERR(data))
 		return PTR_ERR(data);

 	if (data->config & TC654_REG_CONFIG_SDM)
 		pwm = 0;
 	else
 		pwm = tc654_pwm_map[data->duty_cycle];

 	return sprintf(buf, "%d\n", pwm);
 }

 static ssize_t pwm_store(struct device *dev, struct device_attribute *da,
 			 const char *buf, size_t count)
 {
 	struct tc654_data *data = dev_get_drvdata(dev);
 	struct i2c_client *client = data->client;
 	unsigned long val;
 	int ret;

 	if (kstrtoul(buf, 10, &val))
 		return -EINVAL;
 	if (val > 255)
 		return -EINVAL;

 	mutex_lock(&data->update_lock);

 	if (val == 0)
 		data->config |= TC654_REG_CONFIG_SDM;
 	else
 		data->config &= ~TC654_REG_CONFIG_SDM;

 	data->duty_cycle = find_closest(val, tc654_pwm_map,
 					ARRAY_SIZE(tc654_pwm_map));

 	ret = i2c_smbus_write_byte_data(client, TC654_REG_CONFIG, data->config);
 	if (ret < 0)
 		goto out;

 	ret = i2c_smbus_write_byte_data(client, TC654_REG_DUTY_CYCLE,
 					data->duty_cycle);

 out:
 	mutex_unlock(&data->update_lock);
 	return ret < 0 ? ret : count;
 }

 static SENSOR_DEVICE_ATTR_RO(fan1_input, fan, 0);
 static SENSOR_DEVICE_ATTR_RO(fan2_input, fan, 1);
 static SENSOR_DEVICE_ATTR_RW(fan1_min, fan_min, 0);
 static SENSOR_DEVICE_ATTR_RW(fan2_min, fan_min, 1);
 static SENSOR_DEVICE_ATTR_RO(fan1_alarm, fan_alarm, 0);
 static SENSOR_DEVICE_ATTR_RO(fan2_alarm, fan_alarm, 1);
 static SENSOR_DEVICE_ATTR_RW(fan1_pulses, fan_pulses, 0);
 static SENSOR_DEVICE_ATTR_RW(fan2_pulses, fan_pulses, 1);
 static SENSOR_DEVICE_ATTR_RW(pwm1_mode, pwm_mode, 0);
 static SENSOR_DEVICE_ATTR_RW(pwm1, pwm, 0);

 /* Driver data */
 static struct attribute *tc654_attrs[] = {
 	&sensor_dev_attr_fan1_input.dev_attr.attr,
 	&sensor_dev_attr_fan2_input.dev_attr.attr,
 	&sensor_dev_attr_fan1_min.dev_attr.attr,
 	&sensor_dev_attr_fan2_min.dev_attr.attr,
 	&sensor_dev_attr_fan1_alarm.dev_attr.attr,
 	&sensor_dev_attr_fan2_alarm.dev_attr.attr,
 	&sensor_dev_attr_fan1_pulses.dev_attr.attr,
 	&sensor_dev_attr_fan2_pulses.dev_attr.attr,
 	&sensor_dev_attr_pwm1_mode.dev_attr.attr,
 	&sensor_dev_attr_pwm1.dev_attr.attr,
 	NULL
 };

 ATTRIBUTE_GROUPS(tc654);

 /*
  * device probe and removal
  */

 static int tc654_probe(struct i2c_client *client)
 {
 	struct device *dev = &client->dev;
 	struct tc654_data *data;
 	struct device *hwmon_dev;
 	int ret;

 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 		return -ENODEV;

 	data = devm_kzalloc(dev, sizeof(struct tc654_data), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;

 	data->client = client;
 	mutex_init(&data->update_lock);

 	ret = i2c_smbus_read_byte_data(client, TC654_REG_CONFIG);
 	if (ret < 0)
 		return ret;

 	data->config = ret;

 	hwmon_dev =
 	    devm_hwmon_device_register_with_groups(dev, client->name, data,
 						   tc654_groups);
 	return PTR_ERR_OR_ZERO(hwmon_dev);
 }

 static const struct i2c_device_id tc654_id[] = {
 	{"tc654", 0},
 	{"tc655", 0},
 	{}
 };

 MODULE_DEVICE_TABLE(i2c, tc654_id);

 static struct i2c_driver tc654_driver = {
 	.driver = {
 		   .name = "tc654",
 		   },
 	.probe_new = tc654_probe,
 	.id_table = tc654_id,
 };

 module_i2c_driver(tc654_driver);

 MODULE_AUTHOR("Allied Telesis Labs");
 MODULE_DESCRIPTION("Microchip TC654/TC655 driver");
 MODULE_LICENSE("GPL");
	// SPDX-License-Identifier: GPL-2.0-or-later
	/*
	* tc654.c - Linux kernel modules for fan speed controller
	*
	* Copyright (C) 2016 Allied Telesis Labs NZ
	*/

	#include <linux/bitops.h>
	#include <linux/err.h>
	#include <linux/hwmon.h>
	#include <linux/hwmon-sysfs.h>
	#include <linux/i2c.h>
	#include <linux/init.h>
	#include <linux/jiffies.h>
	#include <linux/module.h>
	#include <linux/mutex.h>
	#include <linux/slab.h>
	#include <linux/util_macros.h>

	enum tc654_regs {
	TC654_REG_RPM1 = 0x00, /* RPM Output 1 */
	TC654_REG_RPM2 = 0x01, /* RPM Output 2 */
	TC654_REG_FAN_FAULT1 = 0x02, /* Fan Fault 1 Threshold */
	TC654_REG_FAN_FAULT2 = 0x03, /* Fan Fault 2 Threshold */
	TC654_REG_CONFIG = 0x04, /* Configuration */
	TC654_REG_STATUS = 0x05, /* Status */
	TC654_REG_DUTY_CYCLE = 0x06, /* Fan Speed Duty Cycle */
	TC654_REG_MFR_ID = 0x07, /* Manufacturer Identification */
	TC654_REG_VER_ID = 0x08, /* Version Identification */
	};

	/* Macros to easily index the registers */
	#define TC654_REG_RPM(idx) (TC654_REG_RPM1 + (idx))
	#define TC654_REG_FAN_FAULT(idx) (TC654_REG_FAN_FAULT1 + (idx))

	/* Config register bits */
	#define TC654_REG_CONFIG_RES BIT(6) /* Resolution Selection */
	#define TC654_REG_CONFIG_DUTYC BIT(5) /* Duty Cycle Control */
	#define TC654_REG_CONFIG_SDM BIT(0) /* Shutdown Mode */

	/* Status register bits */
	#define TC654_REG_STATUS_F2F BIT(1) /* Fan 2 Fault */
	#define TC654_REG_STATUS_F1F BIT(0) /* Fan 1 Fault */

	/* RPM resolution for RPM Output registers */
	#define TC654_HIGH_RPM_RESOLUTION 25 /* 25 RPM resolution */
	#define TC654_LOW_RPM_RESOLUTION 50 /* 50 RPM resolution */

	/* Convert to the fan fault RPM threshold from register value */
	#define TC654_FAN_FAULT_FROM_REG(val) ((val) * 50) /* 50 RPM resolution */

	/* Convert to register value from the fan fault RPM threshold */
	#define TC654_FAN_FAULT_TO_REG(val) (((val) / 50) & 0xff)

	/* Register data is read (and cached) at most once per second. */
	#define TC654_UPDATE_INTERVAL HZ

	struct tc654_data {
	struct i2c_client *client;

	/* update mutex */
	struct mutex update_lock;

	/* tc654 register cache */
	bool valid;
	unsigned long last_updated; /* in jiffies */

	u8 rpm_output[2]; /* The fan RPM data for fans 1 and 2 is then
	* written to registers RPM1 and RPM2
	*/
	u8 fan_fault[2]; /* The Fan Fault Threshold Registers are used to
	* set the fan fault threshold levels for fan 1
	* and fan 2
	*/
	u8 config; /* The Configuration Register is an 8-bit read/
	* writable multi-function control register
	* 7: Fan Fault Clear
	* 1 = Clear Fan Fault
	* 0 = Normal Operation (default)
	* 6: Resolution Selection for RPM Output Registers
	* RPM Output Registers (RPM1 and RPM2) will be
	* set for
	* 1 = 25 RPM (9-bit) resolution
	* 0 = 50 RPM (8-bit) resolution (default)
	* 5: Duty Cycle Control Method
	* The V OUT duty cycle will be controlled via
	* 1 = the SMBus interface.
	* 0 = via the V IN analog input pin. (default)
	* 4,3: Fan 2 Pulses Per Rotation
	* 00 = 1
	* 01 = 2 (default)
	* 10 = 4
	* 11 = 8
	* 2,1: Fan 1 Pulses Per Rotation
	* 00 = 1
	* 01 = 2 (default)
	* 10 = 4
	* 11 = 8
	* 0: Shutdown Mode
	* 1 = Shutdown mode.
	* 0 = Normal operation. (default)
	*/
	u8 status; /* The Status register provides all the information
	* about what is going on within the TC654/TC655
	* devices.
	* 7,6: Unimplemented, Read as '0'
	* 5: Over-Temperature Fault Condition
	* 1 = Over-Temperature condition has occurred
	* 0 = Normal operation. V IN is less than 2.6V
	* 4: RPM2 Counter Overflow
	* 1 = Fault condition
	* 0 = Normal operation
	* 3: RPM1 Counter Overflow
	* 1 = Fault condition
	* 0 = Normal operation
	* 2: V IN Input Status
	* 1 = V IN is open
	* 0 = Normal operation. voltage present at V IN
	* 1: Fan 2 Fault
	* 1 = Fault condition
	* 0 = Normal operation
	* 0: Fan 1 Fault
	* 1 = Fault condition
	* 0 = Normal operation
	*/
	u8 duty_cycle; /* The DUTY_CYCLE register is a 4-bit read/
	* writable register used to control the duty
	* cycle of the V OUT output.
	*/
	};

	/* helper to grab and cache data, at most one time per second */
	static struct tc654_data tc654_update_client(struct device dev)
	{
	struct tc654_data *data = dev_get_drvdata(dev);
	struct i2c_client *client = data->client;
	int ret = 0;

	mutex_lock(&data->update_lock);
	if (time_before(jiffies, data->last_updated + TC654_UPDATE_INTERVAL) &&
	likely(data->valid))
	goto out;

	ret = i2c_smbus_read_byte_data(client, TC654_REG_RPM(0));
	if (ret < 0)
	goto out;
	data->rpm_output[0] = ret;

	ret = i2c_smbus_read_byte_data(client, TC654_REG_RPM(1));
	if (ret < 0)
	goto out;
	data->rpm_output[1] = ret;

	ret = i2c_smbus_read_byte_data(client, TC654_REG_FAN_FAULT(0));
	if (ret < 0)
	goto out;
	data->fan_fault[0] = ret;

	ret = i2c_smbus_read_byte_data(client, TC654_REG_FAN_FAULT(1));
	if (ret < 0)
	goto out;
	data->fan_fault[1] = ret;

	ret = i2c_smbus_read_byte_data(client, TC654_REG_CONFIG);
	if (ret < 0)
	goto out;
	data->config = ret;

	ret = i2c_smbus_read_byte_data(client, TC654_REG_STATUS);
	if (ret < 0)
	goto out;
	data->status = ret;

	ret = i2c_smbus_read_byte_data(client, TC654_REG_DUTY_CYCLE);
	if (ret < 0)
	goto out;
	data->duty_cycle = ret & 0x0f;

	data->last_updated = jiffies;
	data->valid = true;
	out:
	mutex_unlock(&data->update_lock);

	if (ret < 0) /* upon error, encode it in return value */
	data = ERR_PTR(ret);

	return data;
	}

	/*
	* sysfs attributes
	*/

	static ssize_t fan_show(struct device dev, struct device_attribute da,
	char *buf)
	{
	int nr = to_sensor_dev_attr(da)->index;
	struct tc654_data *data = tc654_update_client(dev);
	int val;

	if (IS_ERR(data))
	return PTR_ERR(data);

	if (data->config & TC654_REG_CONFIG_RES)
	val = data->rpm_output[nr] * TC654_HIGH_RPM_RESOLUTION;
	else
	val = data->rpm_output[nr] * TC654_LOW_RPM_RESOLUTION;

	return sprintf(buf, "%d\n", val);
	}

	static ssize_t fan_min_show(struct device dev, struct device_attribute da,
	char *buf)
	{
	int nr = to_sensor_dev_attr(da)->index;
	struct tc654_data *data = tc654_update_client(dev);

	if (IS_ERR(data))
	return PTR_ERR(data);

	return sprintf(buf, "%d\n",
	TC654_FAN_FAULT_FROM_REG(data->fan_fault[nr]));
	}

	static ssize_t fan_min_store(struct device dev, struct device_attribute da,
	const char *buf, size_t count)
	{
	int nr = to_sensor_dev_attr(da)->index;
	struct tc654_data *data = dev_get_drvdata(dev);
	struct i2c_client *client = data->client;
	unsigned long val;
	int ret;

	if (kstrtoul(buf, 10, &val))
	return -EINVAL;

	val = clamp_val(val, 0, 12750);

	mutex_lock(&data->update_lock);

	data->fan_fault[nr] = TC654_FAN_FAULT_TO_REG(val);
	ret = i2c_smbus_write_byte_data(client, TC654_REG_FAN_FAULT(nr),
	data->fan_fault[nr]);

	mutex_unlock(&data->update_lock);
	return ret < 0 ? ret : count;
	}

	static ssize_t fan_alarm_show(struct device dev, struct device_attribute da,
	char *buf)
	{
	int nr = to_sensor_dev_attr(da)->index;
	struct tc654_data *data = tc654_update_client(dev);
	int val;

	if (IS_ERR(data))
	return PTR_ERR(data);

	if (nr == 0)
	val = !!(data->status & TC654_REG_STATUS_F1F);
	else
	val = !!(data->status & TC654_REG_STATUS_F2F);

	return sprintf(buf, "%d\n", val);
	}

	static const u8 TC654_FAN_PULSE_SHIFT[] = { 1, 3 };

	static ssize_t fan_pulses_show(struct device *dev,
	struct device_attribute da, char buf)
	{
	int nr = to_sensor_dev_attr(da)->index;
	struct tc654_data *data = tc654_update_client(dev);
	u8 val;

	if (IS_ERR(data))
	return PTR_ERR(data);

	val = BIT((data->config >> TC654_FAN_PULSE_SHIFT[nr]) & 0x03);
	return sprintf(buf, "%d\n", val);
	}

	static ssize_t fan_pulses_store(struct device *dev,
	struct device_attribute da, const char buf,
	size_t count)
	{
	int nr = to_sensor_dev_attr(da)->index;
	struct tc654_data *data = dev_get_drvdata(dev);
	struct i2c_client *client = data->client;
	u8 config;
	unsigned long val;
	int ret;

	if (kstrtoul(buf, 10, &val))
	return -EINVAL;

	switch (val) {
	case 1:
	config = 0;
	break;
	case 2:
	config = 1;
	break;
	case 4:
	config = 2;
	break;
	case 8:
	config = 3;
	break;
	default:
	return -EINVAL;
	}

	mutex_lock(&data->update_lock);

	data->config &= ~(0x03 << TC654_FAN_PULSE_SHIFT[nr]);
	data->config \|= (config << TC654_FAN_PULSE_SHIFT[nr]);
	ret = i2c_smbus_write_byte_data(client, TC654_REG_CONFIG, data->config);

	mutex_unlock(&data->update_lock);
	return ret < 0 ? ret : count;
	}

	static ssize_t pwm_mode_show(struct device dev, struct device_attribute da,
	char *buf)
	{
	struct tc654_data *data = tc654_update_client(dev);

	if (IS_ERR(data))
	return PTR_ERR(data);

	return sprintf(buf, "%d\n", !!(data->config & TC654_REG_CONFIG_DUTYC));
	}

	static ssize_t pwm_mode_store(struct device dev, struct device_attribute da,
	const char *buf, size_t count)
	{
	struct tc654_data *data = dev_get_drvdata(dev);
	struct i2c_client *client = data->client;
	unsigned long val;
	int ret;

	if (kstrtoul(buf, 10, &val))
	return -EINVAL;

	if (val != 0 && val != 1)
	return -EINVAL;

	mutex_lock(&data->update_lock);

	if (val)
	data->config \|= TC654_REG_CONFIG_DUTYC;
	else
	data->config &= ~TC654_REG_CONFIG_DUTYC;

	ret = i2c_smbus_write_byte_data(client, TC654_REG_CONFIG, data->config);

	mutex_unlock(&data->update_lock);
	return ret < 0 ? ret : count;
	}

	static const int tc654_pwm_map[16] = { 77, 88, 102, 112, 124, 136, 148, 160,
	172, 184, 196, 207, 219, 231, 243, 255};

	static ssize_t pwm_show(struct device dev, struct device_attribute da,
	char *buf)
	{
	struct tc654_data *data = tc654_update_client(dev);
	int pwm;

	if (IS_ERR(data))
	return PTR_ERR(data);

	if (data->config & TC654_REG_CONFIG_SDM)
	pwm = 0;
	else
	pwm = tc654_pwm_map[data->duty_cycle];

	return sprintf(buf, "%d\n", pwm);
	}

	static ssize_t pwm_store(struct device dev, struct device_attribute da,
	const char *buf, size_t count)
	{
	struct tc654_data *data = dev_get_drvdata(dev);
	struct i2c_client *client = data->client;
	unsigned long val;
	int ret;

	if (kstrtoul(buf, 10, &val))
	return -EINVAL;
	if (val > 255)
	return -EINVAL;

	mutex_lock(&data->update_lock);

	if (val == 0)
	data->config \|= TC654_REG_CONFIG_SDM;
	else
	data->config &= ~TC654_REG_CONFIG_SDM;

	data->duty_cycle = find_closest(val, tc654_pwm_map,
	ARRAY_SIZE(tc654_pwm_map));

	ret = i2c_smbus_write_byte_data(client, TC654_REG_CONFIG, data->config);
	if (ret < 0)
	goto out;

	ret = i2c_smbus_write_byte_data(client, TC654_REG_DUTY_CYCLE,
	data->duty_cycle);

	out:
	mutex_unlock(&data->update_lock);
	return ret < 0 ? ret : count;
	}

	static SENSOR_DEVICE_ATTR_RO(fan1_input, fan, 0);
	static SENSOR_DEVICE_ATTR_RO(fan2_input, fan, 1);
	static SENSOR_DEVICE_ATTR_RW(fan1_min, fan_min, 0);
	static SENSOR_DEVICE_ATTR_RW(fan2_min, fan_min, 1);
	static SENSOR_DEVICE_ATTR_RO(fan1_alarm, fan_alarm, 0);
	static SENSOR_DEVICE_ATTR_RO(fan2_alarm, fan_alarm, 1);
	static SENSOR_DEVICE_ATTR_RW(fan1_pulses, fan_pulses, 0);
	static SENSOR_DEVICE_ATTR_RW(fan2_pulses, fan_pulses, 1);
	static SENSOR_DEVICE_ATTR_RW(pwm1_mode, pwm_mode, 0);
	static SENSOR_DEVICE_ATTR_RW(pwm1, pwm, 0);

	/* Driver data */
	static struct attribute *tc654_attrs[] = {
	&sensor_dev_attr_fan1_input.dev_attr.attr,
	&sensor_dev_attr_fan2_input.dev_attr.attr,
	&sensor_dev_attr_fan1_min.dev_attr.attr,
	&sensor_dev_attr_fan2_min.dev_attr.attr,
	&sensor_dev_attr_fan1_alarm.dev_attr.attr,
	&sensor_dev_attr_fan2_alarm.dev_attr.attr,
	&sensor_dev_attr_fan1_pulses.dev_attr.attr,
	&sensor_dev_attr_fan2_pulses.dev_attr.attr,
	&sensor_dev_attr_pwm1_mode.dev_attr.attr,
	&sensor_dev_attr_pwm1.dev_attr.attr,
	NULL
	};

	ATTRIBUTE_GROUPS(tc654);

	/*
	* device probe and removal
	*/

	static int tc654_probe(struct i2c_client *client)
	{
	struct device *dev = &client->dev;
	struct tc654_data *data;
	struct device *hwmon_dev;
	int ret;

	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
	return -ENODEV;

	data = devm_kzalloc(dev, sizeof(struct tc654_data), GFP_KERNEL);
	if (!data)
	return -ENOMEM;

	data->client = client;
	mutex_init(&data->update_lock);

	ret = i2c_smbus_read_byte_data(client, TC654_REG_CONFIG);
	if (ret < 0)
	return ret;

	data->config = ret;

	hwmon_dev =
	devm_hwmon_device_register_with_groups(dev, client->name, data,
	tc654_groups);
	return PTR_ERR_OR_ZERO(hwmon_dev);
	}

	static const struct i2c_device_id tc654_id[] = {
	{"tc654", 0},
	{"tc655", 0},
	{}
	};

	MODULE_DEVICE_TABLE(i2c, tc654_id);

	static struct i2c_driver tc654_driver = {
	.driver = {
	.name = "tc654",
	},
	.probe_new = tc654_probe,
	.id_table = tc654_id,
	};

	module_i2c_driver(tc654_driver);

	MODULE_AUTHOR("Allied Telesis Labs");
	MODULE_DESCRIPTION("Microchip TC654/TC655 driver");
	MODULE_LICENSE("GPL");