| CS4265 audio CODEC |
| |
| This device supports I2C only. |
| |
| Required properties: |
| |
| - compatible : "cirrus,cs4265" |
| |
| - reg : the I2C address of the device for I2C. The I2C address depends on |
| the state of the AD0 pin. If AD0 is high, the i2c address is 0x4f. |
| If it is low, the i2c address is 0x4e. |
| |
| Optional properties: |
| |
| - reset-gpios : a GPIO spec for the reset pin. If specified, it will be |
| deasserted before communication to the codec starts. |
| |
| Examples: |
| |
| codec_ad0_high: cs4265@4f { /* AD0 Pin is high */ |
| compatible = "cirrus,cs4265"; |
| reg = <0x4f>; |
| }; |
| |
| |
| codec_ad0_low: cs4265@4e { /* AD0 Pin is low */ |
| compatible = "cirrus,cs4265"; |
| reg = <0x4e>; |
| }; |
