blob: 780728161f7dcde31ffee9ba5a42e08b5b6e4f3d [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
/*
* intel-mid.c: Intel MID platform setup code
*
* (C) Copyright 2008, 2012 Intel Corporation
* Author: Jacob Pan (jacob.jun.pan@intel.com)
* Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
*/
#define pr_fmt(fmt) "intel_mid: " fmt
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/regulator/machine.h>
#include <linux/scatterlist.h>
#include <linux/sfi.h>
#include <linux/irq.h>
#include <linux/export.h>
#include <linux/notifier.h>
#include <asm/setup.h>
#include <asm/mpspec_def.h>
#include <asm/hw_irq.h>
#include <asm/apic.h>
#include <asm/io_apic.h>
#include <asm/intel-mid.h>
#include <asm/intel_mid_vrtc.h>
#include <asm/io.h>
#include <asm/i8259.h>
#include <asm/intel_scu_ipc.h>
#include <asm/apb_timer.h>
#include <asm/reboot.h>
/*
* the clockevent devices on Moorestown/Medfield can be APBT or LAPIC clock,
* cmdline option x86_intel_mid_timer can be used to override the configuration
* to prefer one or the other.
* at runtime, there are basically three timer configurations:
* 1. per cpu apbt clock only
* 2. per cpu always-on lapic clocks only, this is Penwell/Medfield only
* 3. per cpu lapic clock (C3STOP) and one apbt clock, with broadcast.
*
* by default (without cmdline option), platform code first detects cpu type
* to see if we are on lincroft or penwell, then set up both lapic or apbt
* clocks accordingly.
* i.e. by default, medfield uses configuration #2, moorestown uses #1.
* config #3 is supported but not recommended on medfield.
*
* rating and feature summary:
* lapic (with C3STOP) --------- 100
* apbt (always-on) ------------ 110
* lapic (always-on,ARAT) ------ 150
*/
enum intel_mid_timer_options intel_mid_timer_options;
enum intel_mid_cpu_type __intel_mid_cpu_chip;
EXPORT_SYMBOL_GPL(__intel_mid_cpu_chip);
static void intel_mid_power_off(void)
{
/* Shut down South Complex via PWRMU */
intel_mid_pwr_power_off();
/* Only for Tangier, the rest will ignore this command */
intel_scu_ipc_simple_command(IPCMSG_COLD_OFF, 1);
};
static void intel_mid_reboot(void)
{
intel_scu_ipc_simple_command(IPCMSG_COLD_RESET, 0);
}
static void __init intel_mid_setup_bp_timer(void)
{
apbt_time_init();
setup_boot_APIC_clock();
}
static void __init intel_mid_time_init(void)
{
sfi_table_parse(SFI_SIG_MTMR, NULL, NULL, sfi_parse_mtmr);
switch (intel_mid_timer_options) {
case INTEL_MID_TIMER_APBT_ONLY:
break;
case INTEL_MID_TIMER_LAPIC_APBT:
/* Use apbt and local apic */
x86_init.timers.setup_percpu_clockev = intel_mid_setup_bp_timer;
x86_cpuinit.setup_percpu_clockev = setup_secondary_APIC_clock;
return;
default:
if (!boot_cpu_has(X86_FEATURE_ARAT))
break;
/* Lapic only, no apbt */
x86_init.timers.setup_percpu_clockev = setup_boot_APIC_clock;
x86_cpuinit.setup_percpu_clockev = setup_secondary_APIC_clock;
return;
}
x86_init.timers.setup_percpu_clockev = apbt_time_init;
}
static void intel_mid_arch_setup(void)
{
if (boot_cpu_data.x86 != 6) {
pr_err("Unknown Intel MID CPU (%d:%d), default to Penwell\n",
boot_cpu_data.x86, boot_cpu_data.x86_model);
__intel_mid_cpu_chip = INTEL_MID_CPU_CHIP_PENWELL;
goto out;
}
switch (boot_cpu_data.x86_model) {
case 0x35:
__intel_mid_cpu_chip = INTEL_MID_CPU_CHIP_CLOVERVIEW;
break;
case 0x3C:
case 0x4A:
__intel_mid_cpu_chip = INTEL_MID_CPU_CHIP_TANGIER;
x86_platform.legacy.rtc = 1;
break;
case 0x27:
default:
__intel_mid_cpu_chip = INTEL_MID_CPU_CHIP_PENWELL;
break;
}
out:
/*
* Intel MID platforms are using explicitly defined regulators.
*
* Let the regulator core know that we do not have any additional
* regulators left. This lets it substitute unprovided regulators with
* dummy ones:
*/
regulator_has_full_constraints();
}
/*
* Moorestown does not have external NMI source nor port 0x61 to report
* NMI status. The possible NMI sources are from pmu as a result of NMI
* watchdog or lock debug. Reading io port 0x61 results in 0xff which
* misled NMI handler.
*/
static unsigned char intel_mid_get_nmi_reason(void)
{
return 0;
}
/*
* Moorestown specific x86_init function overrides and early setup
* calls.
*/
void __init x86_intel_mid_early_setup(void)
{
x86_init.resources.probe_roms = x86_init_noop;
x86_init.resources.reserve_resources = x86_init_noop;
x86_init.timers.timer_init = intel_mid_time_init;
x86_init.timers.setup_percpu_clockev = x86_init_noop;
x86_init.timers.wallclock_init = intel_mid_rtc_init;
x86_init.irqs.pre_vector_init = x86_init_noop;
x86_init.oem.arch_setup = intel_mid_arch_setup;
x86_cpuinit.setup_percpu_clockev = apbt_setup_secondary_clock;
x86_platform.get_nmi_reason = intel_mid_get_nmi_reason;
x86_init.pci.arch_init = intel_mid_pci_init;
x86_init.pci.fixup_irqs = x86_init_noop;
legacy_pic = &null_legacy_pic;
/*
* Do nothing for now as everything needed done in
* x86_intel_mid_early_setup() below.
*/
x86_init.acpi.reduced_hw_early_init = x86_init_noop;
pm_power_off = intel_mid_power_off;
machine_ops.emergency_restart = intel_mid_reboot;
/* Avoid searching for BIOS MP tables */
x86_init.mpparse.find_smp_config = x86_init_noop;
x86_init.mpparse.get_smp_config = x86_init_uint_noop;
set_bit(MP_BUS_ISA, mp_bus_not_pci);
}
/*
* if user does not want to use per CPU apb timer, just give it a lower rating
* than local apic timer and skip the late per cpu timer init.
*/
static inline int __init setup_x86_intel_mid_timer(char *arg)
{
if (!arg)
return -EINVAL;
if (strcmp("apbt_only", arg) == 0)
intel_mid_timer_options = INTEL_MID_TIMER_APBT_ONLY;
else if (strcmp("lapic_and_apbt", arg) == 0)
intel_mid_timer_options = INTEL_MID_TIMER_LAPIC_APBT;
else {
pr_warn("X86 INTEL_MID timer option %s not recognised use x86_intel_mid_timer=apbt_only or lapic_and_apbt\n",
arg);
return -EINVAL;
}
return 0;
}
__setup("x86_intel_mid_timer=", setup_x86_intel_mid_timer);