Merge tag 'regulator-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This is a fairly small release for the regulator API, there's quite a
few new devices supported and some important improvements around
coupled regulators in the core but mostly just small fixes and
improvements otherwise.
Summary:
- Fixes and cleanups around the handling of coupled regulators.
- A special driver for some Raspberry Pi panels with some unusually
custom stuff around them.
- Support for Qualcomm PM660/PM660L, PM8950 and PM8953, Richtek
RT4801 and RTMV20, Rohm BD9576MUF and BD9573MUF"
* tag 'regulator-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (89 commits)
regulator: bd9576: Fix print
regulator: bd9576: fix regulator binfdings dt node names
dt-bindings: regulator: document pm8950 and pm8953 smd regulators
regulator: qcom_smd: add pm8953 regulators
regulator: Make constraint debug processing conditional on DEBUG
regulator: qcom: labibb: Constify static structs
regulator: dt-bindings: Document the PM660/PM660L PMICs entries
regulator: qcom_smd: Add PM660/PM660L regulator support
regulator: dt-bindings: Document the PM660/660L SPMI PMIC entries
regulator: qcom_spmi: Add PM660/PM660L regulators
regulator: qcom_spmi: Add support for new regulator types
regulator: core: Enlarge max OF property name length to 64 chars
regulator: tps65910: use regmap accessors
regulator: rtmv20: Add missing regcache cache only before marked as dirty
regulator: rtmv20: Update DT binding document and property name parsing
regulator: rtmv20: Add DT-binding document for Richtek RTMV20
regulator: rtmv20: Adds support for Richtek RTMV20 load switch regulator
regulator: resolve supply after creating regulator
regulator: print symbolic errors in kernel messages
regulator: print state at boot
...
diff --git a/.gitignore b/.gitignore
index 162bd2b..d01cda8 100644
--- a/.gitignore
+++ b/.gitignore
@@ -152,3 +152,6 @@
# Clang's compilation database file
/compile_commands.json
+
+# Documentation toolchain
+sphinx_*/
diff --git a/.mailmap b/.mailmap
index a780211..e4ccac4e 100644
--- a/.mailmap
+++ b/.mailmap
@@ -41,7 +41,8 @@
Andrew Vasquez <andrew.vasquez@qlogic.com>
Andrey Ryabinin <ryabinin.a.a@gmail.com> <a.ryabinin@samsung.com>
Andy Adamson <andros@citi.umich.edu>
-Antoine Tenart <antoine.tenart@free-electrons.com>
+Antoine Tenart <atenart@kernel.org> <antoine.tenart@bootlin.com>
+Antoine Tenart <atenart@kernel.org> <antoine.tenart@free-electrons.com>
Antonio Ospite <ao2@ao2.it> <ao2@amarulasolutions.com>
Archit Taneja <archit@ti.com>
Ard Biesheuvel <ardb@kernel.org> <ard.biesheuvel@linaro.org>
@@ -188,6 +189,7 @@
Linas Vepstas <linas@austin.ibm.com>
Linus Lüssing <linus.luessing@c0d3.blue> <linus.luessing@ascom.ch>
Linus Lüssing <linus.luessing@c0d3.blue> <linus.luessing@web.de>
+<linux-hardening@vger.kernel.org> <kernel-hardening@lists.openwall.com>
Li Yang <leoyang.li@nxp.com> <leoli@freescale.com>
Li Yang <leoyang.li@nxp.com> <leo@zh-kernel.org>
Lukasz Luba <lukasz.luba@arm.com> <l.luba@partner.samsung.com>
@@ -195,6 +197,7 @@
Marcin Nowakowski <marcin.nowakowski@mips.com> <marcin.nowakowski@imgtec.com>
Marc Zyngier <maz@kernel.org> <marc.zyngier@arm.com>
Mark Brown <broonie@sirena.org.uk>
+Mark Starovoytov <mstarovo@pm.me> <mstarovoitov@marvell.com>
Mark Yao <markyao0591@gmail.com> <mark.yao@rock-chips.com>
Martin Kepplinger <martink@posteo.de> <martin.kepplinger@ginzinger.com>
Martin Kepplinger <martink@posteo.de> <martin.kepplinger@puri.sm>
diff --git a/Documentation/ABI/stable/sysfs-kernel-notes b/Documentation/ABI/stable/sysfs-kernel-notes
new file mode 100644
index 0000000..2c76ee9
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-kernel-notes
@@ -0,0 +1,5 @@
+What: /sys/kernel/notes
+Date: July 2009
+Contact: <linux-kernel@vger.kernel.org>
+Description: The /sys/kernel/notes file contains the binary representation
+ of the running vmlinux's .notes section.
diff --git a/Documentation/PCI/index.rst b/Documentation/PCI/index.rst
index 8f66fea..c17c87a 100644
--- a/Documentation/PCI/index.rst
+++ b/Documentation/PCI/index.rst
@@ -12,6 +12,7 @@
pciebus-howto
pci-iov-howto
msi-howto
+ sysfs-pci
acpi-info
pci-error-recovery
pcieaer-howto
diff --git a/Documentation/filesystems/sysfs-pci.rst b/Documentation/PCI/sysfs-pci.rst
similarity index 100%
rename from Documentation/filesystems/sysfs-pci.rst
rename to Documentation/PCI/sysfs-pci.rst
diff --git a/Documentation/admin-guide/README.rst b/Documentation/admin-guide/README.rst
index 5aad534..95a28f4 100644
--- a/Documentation/admin-guide/README.rst
+++ b/Documentation/admin-guide/README.rst
@@ -322,9 +322,9 @@
reboot, and enjoy!
If you ever need to change the default root device, video mode,
- ramdisk size, etc. in the kernel image, use the ``rdev`` program (or
- alternatively the LILO boot options when appropriate). No need to
- recompile the kernel to change these parameters.
+ etc. in the kernel image, use your bootloader's boot options
+ where appropriate. No need to recompile the kernel to change
+ these parameters.
- Reboot with the new kernel and enjoy.
diff --git a/Documentation/admin-guide/bcache.rst b/Documentation/admin-guide/bcache.rst
index 1eccf95..8d3a2d0 100644
--- a/Documentation/admin-guide/bcache.rst
+++ b/Documentation/admin-guide/bcache.rst
@@ -5,11 +5,14 @@
Say you've got a big slow raid 6, and an ssd or three. Wouldn't it be
nice if you could use them as cache... Hence bcache.
-Wiki and git repositories are at:
+The bcache wiki can be found at:
+ https://bcache.evilpiepirate.org
- - https://bcache.evilpiepirate.org
- - http://evilpiepirate.org/git/linux-bcache.git
- - https://evilpiepirate.org/git/bcache-tools.git
+This is the git repository of bcache-tools:
+ https://git.kernel.org/pub/scm/linux/kernel/git/colyli/bcache-tools.git/
+
+The latest bcache kernel code can be found from mainline Linux kernel:
+ https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/
It's designed around the performance characteristics of SSDs - it only allocates
in erase block sized buckets, and it uses a hybrid btree/log to track cached
@@ -41,17 +44,21 @@
to be flushed.
Getting started:
-You'll need make-bcache from the bcache-tools repository. Both the cache device
+You'll need bcache util from the bcache-tools repository. Both the cache device
and backing device must be formatted before use::
- make-bcache -B /dev/sdb
- make-bcache -C /dev/sdc
+ bcache make -B /dev/sdb
+ bcache make -C /dev/sdc
-make-bcache has the ability to format multiple devices at the same time - if
+`bcache make` has the ability to format multiple devices at the same time - if
you format your backing devices and cache device at the same time, you won't
have to manually attach::
- make-bcache -B /dev/sda /dev/sdb -C /dev/sdc
+ bcache make -B /dev/sda /dev/sdb -C /dev/sdc
+
+If your bcache-tools is not updated to latest version and does not have the
+unified `bcache` utility, you may use the legacy `make-bcache` utility to format
+bcache device with same -B and -C parameters.
bcache-tools now ships udev rules, and bcache devices are known to the kernel
immediately. Without udev, you can manually register devices like this::
@@ -188,7 +195,7 @@
If bcache is not available in the kernel, a filesystem on the backing
device is still available at an 8KiB offset. So either via a loopdev
of the backing device created with --offset 8K, or any value defined by
---data-offset when you originally formatted bcache with `make-bcache`.
+--data-offset when you originally formatted bcache with `bcache make`.
For example::
@@ -210,7 +217,7 @@
After you boot back with bcache enabled, you recreate the cache and attach it::
- host:~# make-bcache -C /dev/sdh2
+ host:~# bcache make -C /dev/sdh2
UUID: 7be7e175-8f4c-4f99-94b2-9c904d227045
Set UUID: 5bc072a8-ab17-446d-9744-e247949913c1
version: 0
@@ -318,7 +325,7 @@
The default metadata size in bcache is 8k. If your backing device is
RAID based, then be sure to align this by a multiple of your stride
- width using `make-bcache --data-offset`. If you intend to expand your
+ width using `bcache make --data-offset`. If you intend to expand your
disk array in the future, then multiply a series of primes by your
raid stripe size to get the disk multiples that you would like.
diff --git a/Documentation/admin-guide/blockdev/ramdisk.rst b/Documentation/admin-guide/blockdev/ramdisk.rst
index b7c2268..9ce6101 100644
--- a/Documentation/admin-guide/blockdev/ramdisk.rst
+++ b/Documentation/admin-guide/blockdev/ramdisk.rst
@@ -6,7 +6,7 @@
1) Overview
2) Kernel Command Line Parameters
- 3) Using "rdev -r"
+ 3) Using "rdev"
4) An Example of Creating a Compressed RAM Disk
@@ -59,51 +59,27 @@
rd_size
See ramdisk_size.
-3) Using "rdev -r"
-------------------
+3) Using "rdev"
+---------------
-The usage of the word (two bytes) that "rdev -r" sets in the kernel image is
-as follows. The low 11 bits (0 -> 10) specify an offset (in 1 k blocks) of up
-to 2 MB (2^11) of where to find the RAM disk (this used to be the size). Bit
-14 indicates that a RAM disk is to be loaded, and bit 15 indicates whether a
-prompt/wait sequence is to be given before trying to read the RAM disk. Since
-the RAM disk dynamically grows as data is being written into it, a size field
-is not required. Bits 11 to 13 are not currently used and may as well be zero.
-These numbers are no magical secrets, as seen below::
+"rdev" is an obsolete, deprecated, antiquated utility that could be used
+to set the boot device in a Linux kernel image.
- ./arch/x86/kernel/setup.c:#define RAMDISK_IMAGE_START_MASK 0x07FF
- ./arch/x86/kernel/setup.c:#define RAMDISK_PROMPT_FLAG 0x8000
- ./arch/x86/kernel/setup.c:#define RAMDISK_LOAD_FLAG 0x4000
+Instead of using rdev, just place the boot device information on the
+kernel command line and pass it to the kernel from the bootloader.
-Consider a typical two floppy disk setup, where you will have the
-kernel on disk one, and have already put a RAM disk image onto disk #2.
+You can also pass arguments to the kernel by setting FDARGS in
+arch/x86/boot/Makefile and specify in initrd image by setting FDINITRD in
+arch/x86/boot/Makefile.
-Hence you want to set bits 0 to 13 as 0, meaning that your RAM disk
-starts at an offset of 0 kB from the beginning of the floppy.
-The command line equivalent is: "ramdisk_start=0"
+Some of the kernel command line boot options that may apply here are::
-You want bit 14 as one, indicating that a RAM disk is to be loaded.
-The command line equivalent is: "load_ramdisk=1"
-
-You want bit 15 as one, indicating that you want a prompt/keypress
-sequence so that you have a chance to switch floppy disks.
-The command line equivalent is: "prompt_ramdisk=1"
-
-Putting that together gives 2^15 + 2^14 + 0 = 49152 for an rdev word.
-So to create disk one of the set, you would do::
-
- /usr/src/linux# cat arch/x86/boot/zImage > /dev/fd0
- /usr/src/linux# rdev /dev/fd0 /dev/fd0
- /usr/src/linux# rdev -r /dev/fd0 49152
+ ramdisk_start=N
+ ramdisk_size=M
If you make a boot disk that has LILO, then for the above, you would use::
- append = "ramdisk_start=0 load_ramdisk=1 prompt_ramdisk=1"
-
-Since the default start = 0 and the default prompt = 1, you could use::
-
- append = "load_ramdisk=1"
-
+ append = "ramdisk_start=N ramdisk_size=M"
4) An Example of Creating a Compressed RAM Disk
-----------------------------------------------
@@ -151,12 +127,9 @@
dd if=/tmp/ram_image.gz of=/dev/fd0 bs=1k seek=400
-g) Use "rdev" to set the boot device, RAM disk offset, prompt flag, etc.
- For prompt_ramdisk=1, load_ramdisk=1, ramdisk_start=400, one would
- have 2^15 + 2^14 + 400 = 49552::
-
- rdev /dev/fd0 /dev/fd0
- rdev -r /dev/fd0 49552
+g) Make sure that you have already specified the boot information in
+ FDARGS and FDINITRD or that you use a bootloader to pass kernel
+ command line boot options to the kernel.
That is it. You now have your boot/root compressed RAM disk floppy. Some
users may wish to combine steps (d) and (f) by using a pipe.
@@ -167,11 +140,14 @@
Changelog:
----------
+SEPT-2020 :
+
+ Removed usage of "rdev"
+
10-22-04 :
Updated to reflect changes in command line options, remove
obsolete references, general cleanup.
James Nelson (james4765@gmail.com)
-
12-95 :
Original Document
diff --git a/Documentation/admin-guide/cgroup-v1/cpusets.rst b/Documentation/admin-guide/cgroup-v1/cpusets.rst
index 7ade3ab..5d844ed 100644
--- a/Documentation/admin-guide/cgroup-v1/cpusets.rst
+++ b/Documentation/admin-guide/cgroup-v1/cpusets.rst
@@ -1,3 +1,5 @@
+.. _cpusets:
+
=======
CPUSETS
=======
diff --git a/Documentation/admin-guide/kdump/kdump.rst b/Documentation/admin-guide/kdump/kdump.rst
index 2da65fe..75a9dd9 100644
--- a/Documentation/admin-guide/kdump/kdump.rst
+++ b/Documentation/admin-guide/kdump/kdump.rst
@@ -509,9 +509,12 @@
dump kernel.
You can also use the Crash utility to analyze dump files in Kdump
-format. Crash is available on Dave Anderson's site at the following URL:
+format. Crash is available at the following URL:
- http://people.redhat.com/~anderson/
+ https://github.com/crash-utility/crash
+
+Crash document can be found at:
+ https://crash-utility.github.io/
Trigger Kdump on WARN()
=======================
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index a106874..0fa47dd 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -577,7 +577,7 @@
loops can be debugged more effectively on production
systems.
- clearcpuid=BITNUM [X86]
+ clearcpuid=BITNUM[,BITNUM...] [X86]
Disable CPUID feature X for the kernel. See
arch/x86/include/asm/cpufeatures.h for the valid bit
numbers. Note the Linux specific bits are not necessarily
@@ -591,7 +591,7 @@
some critical bits.
cma=nn[MG]@[start[MG][-end[MG]]]
- [ARM,X86,KNL]
+ [KNL,CMA]
Sets the size of kernel global memory area for
contiguous memory allocations and optionally the
placement constraint by the physical address range of
@@ -940,7 +940,7 @@
Arch Perfmon v4 (Skylake and newer).
disable_ddw [PPC/PSERIES]
- Disable Dynamic DMA Window support. Use this if
+ Disable Dynamic DMA Window support. Use this
to workaround buggy firmware.
disable_ipv6= [IPV6]
@@ -1019,7 +1019,7 @@
what data is available or for reverse-engineering.
dyndbg[="val"] [KNL,DYNAMIC_DEBUG]
- module.dyndbg[="val"]
+ <module>.dyndbg[="val"]
Enable debug messages at boot time. See
Documentation/admin-guide/dynamic-debug-howto.rst
for details.
@@ -1027,7 +1027,7 @@
nopku [X86] Disable Memory Protection Keys CPU feature found
in some Intel CPUs.
- module.async_probe [KNL]
+ <module>.async_probe [KNL]
Enable asynchronous probe on this module.
early_ioremap_debug [KNL]
@@ -1956,7 +1956,7 @@
1 - Bypass the IOMMU for DMA.
unset - Use value of CONFIG_IOMMU_DEFAULT_PASSTHROUGH.
- io7= [HW] IO7 for Marvel based alpha systems
+ io7= [HW] IO7 for Marvel-based Alpha systems
See comment before marvel_specify_io7 in
arch/alpha/kernel/core_marvel.c.
@@ -2177,7 +2177,7 @@
kgdbwait [KGDB] Stop kernel execution and enter the
kernel debugger at the earliest opportunity.
- kmac= [MIPS] korina ethernet MAC address.
+ kmac= [MIPS] Korina ethernet MAC address.
Configure the RouterBoard 532 series on-chip
Ethernet adapter MAC address.
@@ -2258,6 +2258,14 @@
[KVM,ARM] Allow use of GICv4 for direct injection of
LPIs.
+ kvm_cma_resv_ratio=n [PPC]
+ Reserves given percentage from system memory area for
+ contiguous memory allocation for KVM hash pagetable
+ allocation.
+ By default it reserves 5% of total system memory.
+ Format: <integer>
+ Default: 5
+
kvm-intel.ept= [KVM,Intel] Disable extended page tables
(virtualized MMU) support on capable Intel chips.
Default is 1 (enabled)
@@ -2367,9 +2375,10 @@
lapic [X86-32,APIC] Enable the local APIC even if BIOS
disabled it.
- lapic= [X86,APIC] "notscdeadline" Do not use TSC deadline
+ lapic= [X86,APIC] Do not use TSC deadline
value for LAPIC timer one-shot implementation. Default
back to the programmable timer unit in the LAPIC.
+ Format: notscdeadline
lapic_timer_c2_ok [X86,APIC] trust the local apic timer
in C2 power state.
@@ -2441,8 +2450,7 @@
memblock=debug [KNL] Enable memblock debug messages.
- load_ramdisk= [RAM] List of ramdisks to load from floppy
- See Documentation/admin-guide/blockdev/ramdisk.rst.
+ load_ramdisk= [RAM] [Deprecated]
lockd.nlm_grace_period=P [NFS] Assign grace period.
Format: <integer>
@@ -2579,8 +2587,8 @@
(machvec) in a generic kernel.
Example: machvec=hpzx1
- machtype= [Loongson] Share the same kernel image file between different
- yeeloong laptop.
+ machtype= [Loongson] Share the same kernel image file between
+ different yeeloong laptops.
Example: machtype=lemote-yeeloong-2f-7inch
max_addr=nn[KMG] [KNL,BOOT,ia64] All physical memory greater
@@ -3185,7 +3193,7 @@
register save and restore. The kernel will only save
legacy floating-point registers on task switch.
- nohugeiomap [KNL,X86,PPC] Disable kernel huge I/O mappings.
+ nohugeiomap [KNL,X86,PPC,ARM64] Disable kernel huge I/O mappings.
nosmt [KNL,S390] Disable symmetric multithreading (SMT).
Equivalent to smt=1.
@@ -3921,9 +3929,7 @@
Param: <number> - step/bucket size as a power of 2 for
statistical time based profiling.
- prompt_ramdisk= [RAM] List of RAM disks to prompt for floppy disk
- before loading.
- See Documentation/admin-guide/blockdev/ramdisk.rst.
+ prompt_ramdisk= [RAM] [Deprecated]
prot_virt= [S390] enable hosting protected virtual machines
isolated from the hypervisor (if hardware supports
@@ -3981,6 +3987,8 @@
ramdisk_size= [RAM] Sizes of RAM disks in kilobytes
See Documentation/admin-guide/blockdev/ramdisk.rst.
+ ramdisk_start= [RAM] RAM disk image start address
+
random.trust_cpu={on,off}
[KNL] Enable or disable trusting the use of the
CPU's random number generator (if available) to
diff --git a/Documentation/admin-guide/media/dvb-usb-dvbsky-cardlist.rst b/Documentation/admin-guide/media/dvb-usb-dvbsky-cardlist.rst
index 4fb4ce5..9f7b619 100644
--- a/Documentation/admin-guide/media/dvb-usb-dvbsky-cardlist.rst
+++ b/Documentation/admin-guide/media/dvb-usb-dvbsky-cardlist.rst
@@ -20,13 +20,13 @@
- 0572:0320
* - DVBSky T680CI
- 0572:680c
- * - MyGica Mini DVB-T2 USB Stick T230
+ * - MyGica Mini DVB-(T/T2/C) USB Stick T230
- 0572:c688
- * - MyGica Mini DVB-T2 USB Stick T230C
+ * - MyGica Mini DVB-(T/T2/C) USB Stick T230C
- 0572:c689
- * - MyGica Mini DVB-T2 USB Stick T230C Lite
+ * - MyGica Mini DVB-(T/T2/C) USB Stick T230C Lite
- 0572:c699
- * - MyGica Mini DVB-T2 USB Stick T230C v2
+ * - MyGica Mini DVB-(T/T2/C) USB Stick T230C v2
- 0572:c68a
* - TechnoTrend TT-connect CT2-4650 CI
- 0b48:3012
diff --git a/Documentation/admin-guide/media/dvb-usb-dw2102-cardlist.rst b/Documentation/admin-guide/media/dvb-usb-dw2102-cardlist.rst
index f01f9df..e39bc8e 100644
--- a/Documentation/admin-guide/media/dvb-usb-dw2102-cardlist.rst
+++ b/Documentation/admin-guide/media/dvb-usb-dw2102-cardlist.rst
@@ -40,6 +40,10 @@
- 0b48:3011
* - TerraTec Cinergy S USB
- 0ccd:0064
+ * - Terratec Cinergy S2 PCIe Dual Port 1
+ - 153b:1181
+ * - Terratec Cinergy S2 PCIe Dual Port 2
+ - 153b:1182
* - Terratec Cinergy S2 USB BOX
- 0ccd:0x0105
* - Terratec Cinergy S2 USB HD
diff --git a/Documentation/admin-guide/media/em28xx-cardlist.rst b/Documentation/admin-guide/media/em28xx-cardlist.rst
index a5f0e6d..ace6571 100644
--- a/Documentation/admin-guide/media/em28xx-cardlist.rst
+++ b/Documentation/admin-guide/media/em28xx-cardlist.rst
@@ -434,3 +434,7 @@
- PCTV DVB-S2 Stick (461e v2)
- em28178
- 2013:0461, 2013:0259
+ * - 105
+ - MyGica iGrabber
+ - em2860
+ - 1f4d:1abe
diff --git a/Documentation/admin-guide/media/ipu3.rst b/Documentation/admin-guide/media/ipu3.rst
index 9361c34..07d139b 100644
--- a/Documentation/admin-guide/media/ipu3.rst
+++ b/Documentation/admin-guide/media/ipu3.rst
@@ -89,41 +89,41 @@
Using the media contorller APIs, the ov5670 sensor is configured to send
frames in packed raw Bayer format to IPU3 CSI2 receiver.
-# This example assumes /dev/media0 as the CIO2 media device
+.. code-block:: none
-export MDEV=/dev/media0
+ # This example assumes /dev/media0 as the CIO2 media device
+ export MDEV=/dev/media0
-# and that ov5670 sensor is connected to i2c bus 10 with address 0x36
+ # and that ov5670 sensor is connected to i2c bus 10 with address 0x36
+ export SDEV=$(media-ctl -d $MDEV -e "ov5670 10-0036")
-export SDEV=$(media-ctl -d $MDEV -e "ov5670 10-0036")
+ # Establish the link for the media devices using media-ctl [#f3]_
+ media-ctl -d $MDEV -l "ov5670:0 -> ipu3-csi2 0:0[1]"
-# Establish the link for the media devices using media-ctl [#f3]_
-media-ctl -d $MDEV -l "ov5670:0 -> ipu3-csi2 0:0[1]"
-
-# Set the format for the media devices
-media-ctl -d $MDEV -V "ov5670:0 [fmt:SGRBG10/2592x1944]"
-
-media-ctl -d $MDEV -V "ipu3-csi2 0:0 [fmt:SGRBG10/2592x1944]"
-
-media-ctl -d $MDEV -V "ipu3-csi2 0:1 [fmt:SGRBG10/2592x1944]"
+ # Set the format for the media devices
+ media-ctl -d $MDEV -V "ov5670:0 [fmt:SGRBG10/2592x1944]"
+ media-ctl -d $MDEV -V "ipu3-csi2 0:0 [fmt:SGRBG10/2592x1944]"
+ media-ctl -d $MDEV -V "ipu3-csi2 0:1 [fmt:SGRBG10/2592x1944]"
Once the media pipeline is configured, desired sensor specific settings
(such as exposure and gain settings) can be set, using the yavta tool.
e.g
-yavta -w 0x009e0903 444 $SDEV
+.. code-block:: none
-yavta -w 0x009e0913 1024 $SDEV
-
-yavta -w 0x009e0911 2046 $SDEV
+ yavta -w 0x009e0903 444 $SDEV
+ yavta -w 0x009e0913 1024 $SDEV
+ yavta -w 0x009e0911 2046 $SDEV
Once the desired sensor settings are set, frame captures can be done as below.
e.g
-yavta --data-prefix -u -c10 -n5 -I -s2592x1944 --file=/tmp/frame-#.bin \
- -f IPU3_SGRBG10 $(media-ctl -d $MDEV -e "ipu3-cio2 0")
+.. code-block:: none
+
+ yavta --data-prefix -u -c10 -n5 -I -s2592x1944 --file=/tmp/frame-#.bin \
+ -f IPU3_SGRBG10 $(media-ctl -d $MDEV -e "ipu3-cio2 0")
With the above command, 10 frames are captured at 2592x1944 resolution, with
sGRBG10 format and output as IPU3_SGRBG10 format.
@@ -269,21 +269,21 @@
Let us take "ipu3-imgu 0" subdev as an example.
-media-ctl -d $MDEV -r
+.. code-block:: none
-media-ctl -d $MDEV -l "ipu3-imgu 0 input":0 -> "ipu3-imgu 0":0[1]
-
-media-ctl -d $MDEV -l "ipu3-imgu 0":2 -> "ipu3-imgu 0 output":0[1]
-
-media-ctl -d $MDEV -l "ipu3-imgu 0":3 -> "ipu3-imgu 0 viewfinder":0[1]
-
-media-ctl -d $MDEV -l "ipu3-imgu 0":4 -> "ipu3-imgu 0 3a stat":0[1]
+ media-ctl -d $MDEV -r
+ media-ctl -d $MDEV -l "ipu3-imgu 0 input":0 -> "ipu3-imgu 0":0[1]
+ media-ctl -d $MDEV -l "ipu3-imgu 0":2 -> "ipu3-imgu 0 output":0[1]
+ media-ctl -d $MDEV -l "ipu3-imgu 0":3 -> "ipu3-imgu 0 viewfinder":0[1]
+ media-ctl -d $MDEV -l "ipu3-imgu 0":4 -> "ipu3-imgu 0 3a stat":0[1]
Also the pipe mode of the corresponding V4L2 subdev should be set as desired
(e.g 0 for video mode or 1 for still mode) through the control id 0x009819a1 as
below.
-yavta -w "0x009819A1 1" /dev/v4l-subdev7
+.. code-block:: none
+
+ yavta -w "0x009819A1 1" /dev/v4l-subdev7
Certain hardware blocks in ImgU pipeline can change the frame resolution by
cropping or scaling, these hardware blocks include Input Feeder(IF), Bayer Down
@@ -371,30 +371,32 @@
the desired results for the main output image and the viewfinder output, in NV12
format.
-v4l2n --pipe=4 --load=/tmp/frame-#.bin --open=/dev/video4
---fmt=type:VIDEO_OUTPUT_MPLANE,width=2592,height=1944,pixelformat=0X47337069
---reqbufs=type:VIDEO_OUTPUT_MPLANE,count:1 --pipe=1 --output=/tmp/frames.out
---open=/dev/video5
---fmt=type:VIDEO_CAPTURE_MPLANE,width=2560,height=1920,pixelformat=NV12
---reqbufs=type:VIDEO_CAPTURE_MPLANE,count:1 --pipe=2 --output=/tmp/frames.vf
---open=/dev/video6
---fmt=type:VIDEO_CAPTURE_MPLANE,width=2560,height=1920,pixelformat=NV12
---reqbufs=type:VIDEO_CAPTURE_MPLANE,count:1 --pipe=3 --open=/dev/video7
---output=/tmp/frames.3A --fmt=type:META_CAPTURE,?
---reqbufs=count:1,type:META_CAPTURE --pipe=1,2,3,4 --stream=5
+.. code-block:: none
+
+ v4l2n --pipe=4 --load=/tmp/frame-#.bin --open=/dev/video4
+ --fmt=type:VIDEO_OUTPUT_MPLANE,width=2592,height=1944,pixelformat=0X47337069 \
+ --reqbufs=type:VIDEO_OUTPUT_MPLANE,count:1 --pipe=1 \
+ --output=/tmp/frames.out --open=/dev/video5 \
+ --fmt=type:VIDEO_CAPTURE_MPLANE,width=2560,height=1920,pixelformat=NV12 \
+ --reqbufs=type:VIDEO_CAPTURE_MPLANE,count:1 --pipe=2 \
+ --output=/tmp/frames.vf --open=/dev/video6 \
+ --fmt=type:VIDEO_CAPTURE_MPLANE,width=2560,height=1920,pixelformat=NV12 \
+ --reqbufs=type:VIDEO_CAPTURE_MPLANE,count:1 --pipe=3 --open=/dev/video7 \
+ --output=/tmp/frames.3A --fmt=type:META_CAPTURE,? \
+ --reqbufs=count:1,type:META_CAPTURE --pipe=1,2,3,4 --stream=5
You can also use yavta [#f2]_ command to do same thing as above:
.. code-block:: none
- yavta --data-prefix -Bcapture-mplane -c10 -n5 -I -s2592x1944 \
- --file=frame-#.out-f NV12 /dev/video5 & \
- yavta --data-prefix -Bcapture-mplane -c10 -n5 -I -s2592x1944 \
- --file=frame-#.vf -f NV12 /dev/video6 & \
- yavta --data-prefix -Bmeta-capture -c10 -n5 -I \
- --file=frame-#.3a /dev/video7 & \
- yavta --data-prefix -Boutput-mplane -c10 -n5 -I -s2592x1944 \
- --file=/tmp/frame-in.cio2 -f IPU3_SGRBG10 /dev/video4
+ yavta --data-prefix -Bcapture-mplane -c10 -n5 -I -s2592x1944 \
+ --file=frame-#.out-f NV12 /dev/video5 & \
+ yavta --data-prefix -Bcapture-mplane -c10 -n5 -I -s2592x1944 \
+ --file=frame-#.vf -f NV12 /dev/video6 & \
+ yavta --data-prefix -Bmeta-capture -c10 -n5 -I \
+ --file=frame-#.3a /dev/video7 & \
+ yavta --data-prefix -Boutput-mplane -c10 -n5 -I -s2592x1944 \
+ --file=/tmp/frame-in.cio2 -f IPU3_SGRBG10 /dev/video4
where /dev/video4, /dev/video5, /dev/video6 and /dev/video7 devices point to
input, output, viewfinder and 3A statistics video nodes respectively.
@@ -408,7 +410,9 @@
Main output frames
~~~~~~~~~~~~~~~~~~
-raw2pnm -x2560 -y1920 -fNV12 /tmp/frames.out /tmp/frames.out.ppm
+.. code-block:: none
+
+ raw2pnm -x2560 -y1920 -fNV12 /tmp/frames.out /tmp/frames.out.ppm
where 2560x1920 is output resolution, NV12 is the video format, followed
by input frame and output PNM file.
@@ -416,7 +420,9 @@
Viewfinder output frames
~~~~~~~~~~~~~~~~~~~~~~~~
-raw2pnm -x2560 -y1920 -fNV12 /tmp/frames.vf /tmp/frames.vf.ppm
+.. code-block:: none
+
+ raw2pnm -x2560 -y1920 -fNV12 /tmp/frames.vf /tmp/frames.vf.ppm
where 2560x1920 is output resolution, NV12 is the video format, followed
by input frame and output PNM file.
@@ -482,63 +488,63 @@
Optical Black Correction Optical Black Correction block subtracts a pre-defined
value from the respective pixel values to obtain better
image quality.
- Defined in :c:type:`ipu3_uapi_obgrid_param`.
+ Defined in struct ipu3_uapi_obgrid_param.
Linearization This algo block uses linearization parameters to
address non-linearity sensor effects. The Lookup table
table is defined in
- :c:type:`ipu3_uapi_isp_lin_vmem_params`.
+ struct ipu3_uapi_isp_lin_vmem_params.
SHD Lens shading correction is used to correct spatial
non-uniformity of the pixel response due to optical
lens shading. This is done by applying a different gain
for each pixel. The gain, black level etc are
- configured in :c:type:`ipu3_uapi_shd_config_static`.
+ configured in struct ipu3_uapi_shd_config_static.
BNR Bayer noise reduction block removes image noise by
applying a bilateral filter.
- See :c:type:`ipu3_uapi_bnr_static_config` for details.
+ See struct ipu3_uapi_bnr_static_config for details.
ANR Advanced Noise Reduction is a block based algorithm
that performs noise reduction in the Bayer domain. The
convolution matrix etc can be found in
- :c:type:`ipu3_uapi_anr_config`.
+ struct ipu3_uapi_anr_config.
DM Demosaicing converts raw sensor data in Bayer format
into RGB (Red, Green, Blue) presentation. Then add
outputs of estimation of Y channel for following stream
processing by Firmware. The struct is defined as
- :c:type:`ipu3_uapi_dm_config`.
+ struct ipu3_uapi_dm_config.
Color Correction Color Correction algo transforms sensor specific color
space to the standard "sRGB" color space. This is done
by applying 3x3 matrix defined in
- :c:type:`ipu3_uapi_ccm_mat_config`.
-Gamma correction Gamma correction :c:type:`ipu3_uapi_gamma_config` is a
+ struct ipu3_uapi_ccm_mat_config.
+Gamma correction Gamma correction struct ipu3_uapi_gamma_config is a
basic non-linear tone mapping correction that is
applied per pixel for each pixel component.
CSC Color space conversion transforms each pixel from the
RGB primary presentation to YUV (Y: brightness,
UV: Luminance) presentation. This is done by applying
a 3x3 matrix defined in
- :c:type:`ipu3_uapi_csc_mat_config`
+ struct ipu3_uapi_csc_mat_config
CDS Chroma down sampling
After the CSC is performed, the Chroma Down Sampling
is applied for a UV plane down sampling by a factor
of 2 in each direction for YUV 4:2:0 using a 4x2
- configurable filter :c:type:`ipu3_uapi_cds_params`.
+ configurable filter struct ipu3_uapi_cds_params.
CHNR Chroma noise reduction
This block processes only the chrominance pixels and
performs noise reduction by cleaning the high
frequency noise.
- See struct :c:type:`ipu3_uapi_yuvp1_chnr_config`.
+ See struct struct ipu3_uapi_yuvp1_chnr_config.
TCC Total color correction as defined in struct
- :c:type:`ipu3_uapi_yuvp2_tcc_static_config`.
+ struct ipu3_uapi_yuvp2_tcc_static_config.
XNR3 eXtreme Noise Reduction V3 is the third revision of
noise reduction algorithm used to improve image
quality. This removes the low frequency noise in the
captured image. Two related structs are being defined,
- :c:type:`ipu3_uapi_isp_xnr3_params` for ISP data memory
- and :c:type:`ipu3_uapi_isp_xnr3_vmem_params` for vector
+ struct ipu3_uapi_isp_xnr3_params for ISP data memory
+ and struct ipu3_uapi_isp_xnr3_vmem_params for vector
memory.
TNR Temporal Noise Reduction block compares successive
frames in time to remove anomalies / noise in pixel
- values. :c:type:`ipu3_uapi_isp_tnr3_vmem_params` and
- :c:type:`ipu3_uapi_isp_tnr3_params` are defined for ISP
+ values. struct ipu3_uapi_isp_tnr3_vmem_params and
+ struct ipu3_uapi_isp_tnr3_params are defined for ISP
vector and data memory respectively.
======================== =======================================================
@@ -570,9 +576,9 @@
called accelerator cluster (ACC) to crunch pixel data and produce statistics.
ACC parameters of individual algorithms, as defined by
-:c:type:`ipu3_uapi_acc_param`, can be chosen to be applied by the user
-space through struct :c:type:`ipu3_uapi_flags` embedded in
-:c:type:`ipu3_uapi_params` structure. For parameters that are configured as
+struct ipu3_uapi_acc_param, can be chosen to be applied by the user
+space through struct struct ipu3_uapi_flags embedded in
+struct ipu3_uapi_params structure. For parameters that are configured as
not enabled by the user space, the corresponding structs are ignored by the
driver, in which case the existing configuration of the algorithm will be
preserved.
diff --git a/Documentation/admin-guide/media/pci-cardlist.rst b/Documentation/admin-guide/media/pci-cardlist.rst
index 434fe99..f4d670e 100644
--- a/Documentation/admin-guide/media/pci-cardlist.rst
+++ b/Documentation/admin-guide/media/pci-cardlist.rst
@@ -90,6 +90,7 @@
tw5864 Techwell TW5864 video/audio grabber and encoder
tw686x Intersil/Techwell TW686x
tw68 Techwell tw68x Video For Linux
+zoran Zoran-36057/36067 JPEG codec
================ ========================================================
Some of those drivers support multiple devices, as shown at the card
@@ -105,3 +106,4 @@
ivtv-cardlist
saa7134-cardlist
saa7164-cardlist
+ zoran-cardlist
diff --git a/Documentation/admin-guide/media/rkisp1.dot b/Documentation/admin-guide/media/rkisp1.dot
new file mode 100644
index 0000000..54c1953
--- /dev/null
+++ b/Documentation/admin-guide/media/rkisp1.dot
@@ -0,0 +1,18 @@
+digraph board {
+ rankdir=TB
+ n00000001 [label="{{<port0> 0 | <port1> 1} | rkisp1_isp\n/dev/v4l-subdev0 | {<port2> 2 | <port3> 3}}", shape=Mrecord, style=filled, fillcolor=green]
+ n00000001:port2 -> n00000006:port0
+ n00000001:port2 -> n00000009:port0
+ n00000001:port3 -> n00000014 [style=bold]
+ n00000006 [label="{{<port0> 0} | rkisp1_resizer_mainpath\n/dev/v4l-subdev1 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+ n00000006:port1 -> n0000000c [style=bold]
+ n00000009 [label="{{<port0> 0} | rkisp1_resizer_selfpath\n/dev/v4l-subdev2 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+ n00000009:port1 -> n00000010 [style=bold]
+ n0000000c [label="rkisp1_mainpath\n/dev/video0", shape=box, style=filled, fillcolor=yellow]
+ n00000010 [label="rkisp1_selfpath\n/dev/video1", shape=box, style=filled, fillcolor=yellow]
+ n00000014 [label="rkisp1_stats\n/dev/video2", shape=box, style=filled, fillcolor=yellow]
+ n00000018 [label="rkisp1_params\n/dev/video3", shape=box, style=filled, fillcolor=yellow]
+ n00000018 -> n00000001:port1 [style=bold]
+ n0000001c [label="{{} | imx219 4-0010\n/dev/v4l-subdev3 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
+ n0000001c:port0 -> n00000001:port0
+}
diff --git a/Documentation/admin-guide/media/rkisp1.rst b/Documentation/admin-guide/media/rkisp1.rst
new file mode 100644
index 0000000..42e37ed
--- /dev/null
+++ b/Documentation/admin-guide/media/rkisp1.rst
@@ -0,0 +1,181 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: <isonum.txt>
+
+=========================================
+Rockchip Image Signal Processor (rkisp1)
+=========================================
+
+Introduction
+============
+
+This file documents the driver for the Rockchip ISP1 that is part of RK3288
+and RK3399 SoCs. The driver is located under drivers/staging/media/rkisp1
+and uses the Media-Controller API.
+
+Topology
+========
+.. _rkisp1_topology_graph:
+
+.. kernel-figure:: rkisp1.dot
+ :alt: Diagram of the default media pipeline topology
+ :align: center
+
+
+The driver has 4 video devices:
+
+- rkisp1_mainpath: capture device for retrieving images, usually in higher
+ resolution.
+- rkisp1_selfpath: capture device for retrieving images.
+- rkisp1_stats: a metadata capture device that sends statistics.
+- rkisp1_params: a metadata output device that receives parameters
+ configurations from userspace.
+
+The driver has 3 subdevices:
+
+- rkisp1_resizer_mainpath: used to resize and downsample frames for the
+ mainpath capture device.
+- rkisp1_resizer_selfpath: used to resize and downsample frames for the
+ selfpath capture device.
+- rkisp1_isp: is connected to the sensor and is responsible for all the isp
+ operations.
+
+
+rkisp1_mainpath, rkisp1_selfpath - Frames Capture Video Nodes
+-------------------------------------------------------------
+Those are the `mainpath` and `selfpath` capture devices to capture frames.
+Those entities are the DMA engines that write the frames to memory.
+The selfpath video device can capture YUV/RGB formats. Its input is YUV encoded
+stream and it is able to convert it to RGB. The selfpath is not able to
+capture bayer formats.
+The mainpath can capture both bayer and YUV formats but it is not able to
+capture RGB formats.
+Both capture videos support
+the ``V4L2_CAP_IO_MC`` :ref:`capability <device-capabilities>`.
+
+
+rkisp1_resizer_mainpath, rkisp1_resizer_selfpath - Resizers Subdevices Nodes
+----------------------------------------------------------------------------
+Those are resizer entities for the mainpath and the selfpath. Those entities
+can scale the frames up and down and also change the YUV sampling (for example
+YUV4:2:2 -> YUV4:2:0). They also have cropping capability on the sink pad.
+The resizers entities can only operate on YUV:4:2:2 format
+(MEDIA_BUS_FMT_YUYV8_2X8).
+The mainpath capture device supports capturing video in bayer formats. In that
+case the resizer of the mainpath is set to 'bypass' mode - it just forward the
+frame without operating on it.
+
+rkisp1_isp - Image Signal Processing Subdevice Node
+---------------------------------------------------
+This is the isp entity. It is connected to the sensor on sink pad 0 and
+receives the frames using the CSI-2 protocol. It is responsible of configuring
+the CSI-2 protocol. It has a cropping capability on sink pad 0 that is
+connected to the sensor and on source pad 2 connected to the resizer entities.
+Cropping on sink pad 0 defines the image region from the sensor.
+Cropping on source pad 2 defines the region for the Image Stabilizer (IS).
+
+.. _rkisp1_stats:
+
+rkisp1_stats - Statistics Video Node
+------------------------------------
+The statistics video node outputs the 3A (auto focus, auto exposure and auto
+white balance) statistics, and also histogram statistics for the frames that
+are being processed by the rkisp1 to userspace applications.
+Using these data, applications can implement algorithms and re-parameterize
+the driver through the rkisp_params node to improve image quality during a
+video stream.
+The buffer format is defined by struct :c:type:`rkisp1_stat_buffer`, and
+userspace should set
+:ref:`V4L2_META_FMT_RK_ISP1_STAT_3A <v4l2-meta-fmt-stat-rkisp1>` as the
+dataformat.
+
+.. _rkisp1_params:
+
+rkisp1_params - Parameters Video Node
+-------------------------------------
+The rkisp1_params video node receives a set of parameters from userspace
+to be applied to the hardware during a video stream, allowing userspace
+to dynamically modify values such as black level, cross talk corrections
+and others.
+
+The buffer format is defined by struct :c:type:`rkisp1_params_cfg`, and
+userspace should set
+:ref:`V4L2_META_FMT_RK_ISP1_PARAMS <v4l2-meta-fmt-params-rkisp1>` as the
+dataformat.
+
+
+Capturing Video Frames Example
+==============================
+
+In the following example, the sensor connected to pad 0 of 'rkisp1_isp' is
+imx219.
+
+The following commands can be used to capture video from the selfpath video
+node with dimension 900x800 planar format YUV 4:2:2. It uses all cropping
+capabilities possible, (see explanation right below)
+
+.. code-block:: bash
+
+ # set the links
+ "media-ctl" "-d" "platform:rkisp1" "-r"
+ "media-ctl" "-d" "platform:rkisp1" "-l" "'imx219 4-0010':0 -> 'rkisp1_isp':0 [1]"
+ "media-ctl" "-d" "platform:rkisp1" "-l" "'rkisp1_isp':2 -> 'rkisp1_resizer_selfpath':0 [1]"
+ "media-ctl" "-d" "platform:rkisp1" "-l" "'rkisp1_isp':2 -> 'rkisp1_resizer_mainpath':0 [0]"
+
+ # set format for imx219 4-0010:0
+ "media-ctl" "-d" "platform:rkisp1" "--set-v4l2" '"imx219 4-0010":0 [fmt:SRGGB10_1X10/1640x1232]'
+
+ # set format for rkisp1_isp pads:
+ "media-ctl" "-d" "platform:rkisp1" "--set-v4l2" '"rkisp1_isp":0 [fmt:SRGGB10_1X10/1640x1232 crop: (0,0)/1600x1200]'
+ "media-ctl" "-d" "platform:rkisp1" "--set-v4l2" '"rkisp1_isp":2 [fmt:YUYV8_2X8/1600x1200 crop: (0,0)/1500x1100]'
+
+ # set format for rkisp1_resizer_selfpath pads:
+ "media-ctl" "-d" "platform:rkisp1" "--set-v4l2" '"rkisp1_resizer_selfpath":0 [fmt:YUYV8_2X8/1500x1100 crop: (300,400)/1400x1000]'
+ "media-ctl" "-d" "platform:rkisp1" "--set-v4l2" '"rkisp1_resizer_selfpath":1 [fmt:YUYV8_2X8/900x800]'
+
+ # set format for rkisp1_selfpath:
+ "v4l2-ctl" "-z" "platform:rkisp1" "-d" "rkisp1_selfpath" "-v" "width=900,height=800,"
+ "v4l2-ctl" "-z" "platform:rkisp1" "-d" "rkisp1_selfpath" "-v" "pixelformat=422P"
+
+ # start streaming:
+ v4l2-ctl "-z" "platform:rkisp1" "-d" "rkisp1_selfpath" "--stream-mmap" "--stream-count" "10"
+
+
+In the above example the sensor is configured to bayer format:
+`SRGGB10_1X10/1640x1232`. The rkisp1_isp:0 pad should be configured to the
+same mbus format and dimensions as the sensor, otherwise streaming will fail
+with 'EPIPE' error. So it is also configured to `SRGGB10_1X10/1640x1232`.
+In addition, the rkisp1_isp:0 pad is configured to cropping `(0,0)/1600x1200`.
+
+The cropping dimensions are automatically propagated to be the format of the
+isp source pad `rkisp1_isp:2`. Another cropping operation is configured on
+the isp source pad: `(0,0)/1500x1100`.
+
+The resizer's sink pad `rkisp1_resizer_selfpath` should be configured to format
+`YUYV8_2X8/1500x1100` in order to match the format on the other side of the
+link. In addition a cropping `(300,400)/1400x1000` is configured on it.
+
+The source pad of the resizer, `rkisp1_resizer_selfpath:1` is configured to
+format `YUYV8_2X8/900x800`. That means that the resizer first crop a window
+of `(300,400)/1400x100` from the received frame and then scales this window
+to dimension `900x800`.
+
+Note that the above example does not uses the stats-params control loop.
+Therefore the capture frames will not go through the 3A algorithms and
+probably won't have a good quality, and can even look dark and greenish.
+
+Configuring Quantization
+========================
+
+The driver supports limited and full range quantization on YUV formats,
+where limited is the default.
+To switch between one or the other, userspace should use the Colorspace
+Conversion API (CSC) for subdevices on source pad 2 of the
+isp (`rkisp1_isp:2`). The quantization configured on this pad is the
+quantization of the captured video frames on the mainpath and selfpath
+video nodes.
+Note that the resizer and capture entities will always report
+``V4L2_QUANTIZATION_DEFAULT`` even if the quantization is configured to full
+range on `rkisp1_isp:2`. So in order to get the configured quantization,
+application should get it from pad `rkisp1_isp:2`.
+
diff --git a/Documentation/admin-guide/media/siano-cardlist.rst b/Documentation/admin-guide/media/siano-cardlist.rst
index d387c04..bb731a9 100644
--- a/Documentation/admin-guide/media/siano-cardlist.rst
+++ b/Documentation/admin-guide/media/siano-cardlist.rst
@@ -20,7 +20,7 @@
- 2040:1801
* - Hauppauge WinTV MiniCard
- 2040:2000, 2040:200a, 2040:2010, 2040:2011, 2040:2019
- * - Hauppauge WinTV MiniCard
+ * - Hauppauge WinTV MiniCard Rev 2
- 2040:2009
* - Hauppauge WinTV MiniStick
- 2040:5500, 2040:5510, 2040:5520, 2040:5530, 2040:5580, 2040:5590, 2040:b900, 2040:b910, 2040:b980, 2040:b990, 2040:c000, 2040:c010, 2040:c080, 2040:c090, 2040:c0a0, 2040:f5a0
diff --git a/Documentation/admin-guide/media/usb-cardlist.rst b/Documentation/admin-guide/media/usb-cardlist.rst
index 546fd40..1e96f92 100644
--- a/Documentation/admin-guide/media/usb-cardlist.rst
+++ b/Documentation/admin-guide/media/usb-cardlist.rst
@@ -112,7 +112,6 @@
em28xx-cardlist
tm6000-cardlist
siano-cardlist
- usbvision-cardlist
gspca-cardlist
diff --git a/Documentation/admin-guide/media/usbvision-cardlist.rst b/Documentation/admin-guide/media/usbvision-cardlist.rst
deleted file mode 100644
index 6aee115..0000000
--- a/Documentation/admin-guide/media/usbvision-cardlist.rst
+++ /dev/null
@@ -1,283 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-USBvision cards list
-====================
-
-.. tabularcolumns:: |p{1.4cm}|p{11.1cm}|p{4.2cm}|
-
-.. flat-table::
- :header-rows: 1
- :widths: 2 19 18
- :stub-columns: 0
-
- * - Card number
- - Card name
- - USB IDs
-
- * - 0
- - Xanboo
- - 0a6f:0400
-
- * - 1
- - Belkin USB VideoBus II Adapter
- - 050d:0106
-
- * - 2
- - Belkin Components USB VideoBus
- - 050d:0207
-
- * - 3
- - Belkin USB VideoBus II
- - 050d:0208
-
- * - 4
- - echoFX InterView Lite
- - 0571:0002
-
- * - 5
- - USBGear USBG-V1 resp. HAMA USB
- - 0573:0003
-
- * - 6
- - D-Link V100
- - 0573:0400
-
- * - 7
- - X10 USB Camera
- - 0573:2000
-
- * - 8
- - Hauppauge WinTV USB Live (PAL B/G)
- - 0573:2d00
-
- * - 9
- - Hauppauge WinTV USB Live Pro (NTSC M/N)
- - 0573:2d01
-
- * - 10
- - Zoran Co. PMD (Nogatech) AV-grabber Manhattan
- - 0573:2101
-
- * - 11
- - Nogatech USB-TV (NTSC) FM
- - 0573:4100
-
- * - 12
- - PNY USB-TV (NTSC) FM
- - 0573:4110
-
- * - 13
- - PixelView PlayTv-USB PRO (PAL) FM
- - 0573:4450
-
- * - 14
- - ZTV ZT-721 2.4GHz USB A/V Receiver
- - 0573:4550
-
- * - 15
- - Hauppauge WinTV USB (NTSC M/N)
- - 0573:4d00
-
- * - 16
- - Hauppauge WinTV USB (PAL B/G)
- - 0573:4d01
-
- * - 17
- - Hauppauge WinTV USB (PAL I)
- - 0573:4d02
-
- * - 18
- - Hauppauge WinTV USB (PAL/SECAM L)
- - 0573:4d03
-
- * - 19
- - Hauppauge WinTV USB (PAL D/K)
- - 0573:4d04
-
- * - 20
- - Hauppauge WinTV USB (NTSC FM)
- - 0573:4d10
-
- * - 21
- - Hauppauge WinTV USB (PAL B/G FM)
- - 0573:4d11
-
- * - 22
- - Hauppauge WinTV USB (PAL I FM)
- - 0573:4d12
-
- * - 23
- - Hauppauge WinTV USB (PAL D/K FM)
- - 0573:4d14
-
- * - 24
- - Hauppauge WinTV USB Pro (NTSC M/N)
- - 0573:4d2a
-
- * - 25
- - Hauppauge WinTV USB Pro (NTSC M/N) V2
- - 0573:4d2b
-
- * - 26
- - Hauppauge WinTV USB Pro (PAL/SECAM B/G/I/D/K/L)
- - 0573:4d2c
-
- * - 27
- - Hauppauge WinTV USB Pro (NTSC M/N) V3
- - 0573:4d20
-
- * - 28
- - Hauppauge WinTV USB Pro (PAL B/G)
- - 0573:4d21
-
- * - 29
- - Hauppauge WinTV USB Pro (PAL I)
- - 0573:4d22
-
- * - 30
- - Hauppauge WinTV USB Pro (PAL/SECAM L)
- - 0573:4d23
-
- * - 31
- - Hauppauge WinTV USB Pro (PAL D/K)
- - 0573:4d24
-
- * - 32
- - Hauppauge WinTV USB Pro (PAL/SECAM BGDK/I/L)
- - 0573:4d25
-
- * - 33
- - Hauppauge WinTV USB Pro (PAL/SECAM BGDK/I/L) V2
- - 0573:4d26
-
- * - 34
- - Hauppauge WinTV USB Pro (PAL B/G) V2
- - 0573:4d27
-
- * - 35
- - Hauppauge WinTV USB Pro (PAL B/G,D/K)
- - 0573:4d28
-
- * - 36
- - Hauppauge WinTV USB Pro (PAL I,D/K)
- - 0573:4d29
-
- * - 37
- - Hauppauge WinTV USB Pro (NTSC M/N FM)
- - 0573:4d30
-
- * - 38
- - Hauppauge WinTV USB Pro (PAL B/G FM)
- - 0573:4d31
-
- * - 39
- - Hauppauge WinTV USB Pro (PAL I FM)
- - 0573:4d32
-
- * - 40
- - Hauppauge WinTV USB Pro (PAL D/K FM)
- - 0573:4d34
-
- * - 41
- - Hauppauge WinTV USB Pro (Temic PAL/SECAM B/G/I/D/K/L FM)
- - 0573:4d35
-
- * - 42
- - Hauppauge WinTV USB Pro (Temic PAL B/G FM)
- - 0573:4d36
-
- * - 43
- - Hauppauge WinTV USB Pro (PAL/SECAM B/G/I/D/K/L FM)
- - 0573:4d37
-
- * - 44
- - Hauppauge WinTV USB Pro (NTSC M/N FM) V2
- - 0573:4d38
-
- * - 45
- - Camtel Technology USB TV Genie Pro FM Model TVB330
- - 0768:0006
-
- * - 46
- - Digital Video Creator I
- - 07d0:0001
-
- * - 47
- - Global Village GV-007 (NTSC)
- - 07d0:0002
-
- * - 48
- - Dazzle Fusion Model DVC-50 Rev 1 (NTSC)
- - 07d0:0003
-
- * - 49
- - Dazzle Fusion Model DVC-80 Rev 1 (PAL)
- - 07d0:0004
-
- * - 50
- - Dazzle Fusion Model DVC-90 Rev 1 (SECAM)
- - 07d0:0005
-
- * - 51
- - Eskape Labs MyTV2Go
- - 07f8:9104
-
- * - 52
- - Pinnacle Studio PCTV USB (PAL)
- - 2304:010d
-
- * - 53
- - Pinnacle Studio PCTV USB (SECAM)
- - 2304:0109
-
- * - 54
- - Pinnacle Studio PCTV USB (PAL) FM
- - 2304:0110
-
- * - 55
- - Miro PCTV USB
- - 2304:0111
-
- * - 56
- - Pinnacle Studio PCTV USB (NTSC) FM
- - 2304:0112
-
- * - 57
- - Pinnacle Studio PCTV USB (PAL) FM V2
- - 2304:0210
-
- * - 58
- - Pinnacle Studio PCTV USB (NTSC) FM V2
- - 2304:0212
-
- * - 59
- - Pinnacle Studio PCTV USB (PAL) FM V3
- - 2304:0214
-
- * - 60
- - Pinnacle Studio Linx Video input cable (NTSC)
- - 2304:0300
-
- * - 61
- - Pinnacle Studio Linx Video input cable (PAL)
- - 2304:0301
-
- * - 62
- - Pinnacle PCTV Bungee USB (PAL) FM
- - 2304:0419
-
- * - 63
- - Hauppauge WinTv-USB
- - 2400:4200
-
- * - 64
- - Pinnacle Studio PCTV USB (NTSC) FM V3
- - 2304:0113
-
- * - 65
- - Nogatech USB MicroCam NTSC (NV3000N)
- - 0573:3000
-
- * - 66
- - Nogatech USB MicroCam PAL (NV3001P)
- - 0573:3001
diff --git a/Documentation/admin-guide/media/v4l-drivers.rst b/Documentation/admin-guide/media/v4l-drivers.rst
index 251cc4e..9c7ebe2 100644
--- a/Documentation/admin-guide/media/v4l-drivers.rst
+++ b/Documentation/admin-guide/media/v4l-drivers.rst
@@ -25,6 +25,7 @@
philips
qcom_camss
rcar-fdp1
+ rkisp1
saa7134
si470x
si4713
diff --git a/Documentation/admin-guide/media/zoran-cardlist.rst b/Documentation/admin-guide/media/zoran-cardlist.rst
new file mode 100644
index 0000000..d7fc8be
--- /dev/null
+++ b/Documentation/admin-guide/media/zoran-cardlist.rst
@@ -0,0 +1,51 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Zoran cards list
+================
+
+.. tabularcolumns:: |p{1.4cm}|p{11.1cm}|p{4.2cm}|
+
+.. flat-table::
+ :header-rows: 1
+ :widths: 2 19 18
+ :stub-columns: 0
+
+ * - Card number
+ - Card name
+ - PCI subsystem IDs
+
+ * - 0
+ - DC10(old)
+ - <any>
+
+ * - 1
+ - DC10(new)
+ - <any>
+
+ * - 2
+ - DC10_PLUS
+ - 1031:7efe
+
+ * - 3
+ - DC30
+ - <any>
+
+ * - 4
+ - DC30_PLUS
+ - 1031:d801
+
+ * - 5
+ - LML33
+ - <any>
+
+ * - 6
+ - LML33R10
+ - 12f8:8a02
+
+ * - 7
+ - Buz
+ - 13ca:4231
+
+ * - 8
+ - 6-Eyes
+ - <any>
diff --git a/Documentation/admin-guide/perf/arm-cmn.rst b/Documentation/admin-guide/perf/arm-cmn.rst
new file mode 100644
index 0000000..0e48093
--- /dev/null
+++ b/Documentation/admin-guide/perf/arm-cmn.rst
@@ -0,0 +1,65 @@
+=============================
+Arm Coherent Mesh Network PMU
+=============================
+
+CMN-600 is a configurable mesh interconnect consisting of a rectangular
+grid of crosspoints (XPs), with each crosspoint supporting up to two
+device ports to which various AMBA CHI agents are attached.
+
+CMN implements a distributed PMU design as part of its debug and trace
+functionality. This consists of a local monitor (DTM) at every XP, which
+counts up to 4 event signals from the connected device nodes and/or the
+XP itself. Overflow from these local counters is accumulated in up to 8
+global counters implemented by the main controller (DTC), which provides
+overall PMU control and interrupts for global counter overflow.
+
+PMU events
+----------
+
+The PMU driver registers a single PMU device for the whole interconnect,
+see /sys/bus/event_source/devices/arm_cmn. Multi-chip systems may link
+more than one CMN together via external CCIX links - in this situation,
+each mesh counts its own events entirely independently, and additional
+PMU devices will be named arm_cmn_{1..n}.
+
+Most events are specified in a format based directly on the TRM
+definitions - "type" selects the respective node type, and "eventid" the
+event number. Some events require an additional occupancy ID, which is
+specified by "occupid".
+
+* Since RN-D nodes do not have any distinct events from RN-I nodes, they
+ are treated as the same type (0xa), and the common event templates are
+ named "rnid_*".
+
+* The cycle counter is treated as a synthetic event belonging to the DTC
+ node ("type" == 0x3, "eventid" is ignored).
+
+* XP events also encode the port and channel in the "eventid" field, to
+ match the underlying pmu_event0_id encoding for the pmu_event_sel
+ register. The event templates are named with prefixes to cover all
+ permutations.
+
+By default each event provides an aggregate count over all nodes of the
+given type. To target a specific node, "bynodeid" must be set to 1 and
+"nodeid" to the appropriate value derived from the CMN configuration
+(as defined in the "Node ID Mapping" section of the TRM).
+
+Watchpoints
+-----------
+
+The PMU can also count watchpoint events to monitor specific flit
+traffic. Watchpoints are treated as a synthetic event type, and like PMU
+events can be global or targeted with a particular XP's "nodeid" value.
+Since the watchpoint direction is otherwise implicit in the underlying
+register selection, separate events are provided for flit uploads and
+downloads.
+
+The flit match value and mask are passed in config1 and config2 ("val"
+and "mask" respectively). "wp_dev_sel", "wp_chn_sel", "wp_grp" and
+"wp_exclusive" are specified per the TRM definitions for dtm_wp_config0.
+Where a watchpoint needs to match fields from both match groups on the
+REQ or SNP channel, it can be specified as two events - one for each
+group - with the same nonzero "combine" value. The count for such a
+pair of combined events will be attributed to the primary match.
+Watchpoint events with a "combine" value of 0 are considered independent
+and will count individually.
diff --git a/Documentation/admin-guide/perf/index.rst b/Documentation/admin-guide/perf/index.rst
index 47c99f4..5a8f252 100644
--- a/Documentation/admin-guide/perf/index.rst
+++ b/Documentation/admin-guide/perf/index.rst
@@ -12,6 +12,7 @@
qcom_l2_pmu
qcom_l3_pmu
arm-ccn
+ arm-cmn
xgene-pmu
arm_dsu_pmu
thunderx2-pmu
diff --git a/Documentation/admin-guide/svga.rst b/Documentation/admin-guide/svga.rst
index b6c2f9a..9eb1e07 100644
--- a/Documentation/admin-guide/svga.rst
+++ b/Documentation/admin-guide/svga.rst
@@ -12,7 +12,8 @@
This small document describes the "Video Mode Selection" feature which
allows the use of various special video modes supported by the video BIOS. Due
to usage of the BIOS, the selection is limited to boot time (before the
-kernel decompression starts) and works only on 80X86 machines.
+kernel decompression starts) and works only on 80X86 machines that are
+booted through BIOS firmware (as opposed to through UEFI, kexec, etc.).
.. note::
@@ -23,7 +24,7 @@
The video mode to be used is selected by a kernel parameter which can be
specified in the kernel Makefile (the SVGA_MODE=... line) or by the "vga=..."
-option of LILO (or some other boot loader you use) or by the "vidmode" utility
+option of LILO (or some other boot loader you use) or by the "xrandr" utility
(present in standard Linux utility packages). You can use the following values
of this parameter::
@@ -41,7 +42,7 @@
better to use absolute mode numbers instead.
0x.... - Hexadecimal video mode ID (also displayed on the menu, see below
- for exact meaning of the ID). Warning: rdev and LILO don't support
+ for exact meaning of the ID). Warning: LILO doesn't support
hexadecimal numbers -- you have to convert it to decimal manually.
Menu
diff --git a/Documentation/admin-guide/sysctl/abi.rst b/Documentation/admin-guide/sysctl/abi.rst
index 599bcde..ac87eaf 100644
--- a/Documentation/admin-guide/sysctl/abi.rst
+++ b/Documentation/admin-guide/sysctl/abi.rst
@@ -1,67 +1,34 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
================================
Documentation for /proc/sys/abi/
================================
-kernel version 2.6.0.test2
+.. See scripts/check-sysctl-docs to keep this up to date:
+.. scripts/check-sysctl-docs -vtable="abi" \
+.. Documentation/admin-guide/sysctl/abi.rst \
+.. $(git grep -l register_sysctl_)
-Copyright (c) 2003, Fabian Frederick <ffrederick@users.sourceforge.net>
+Copyright (c) 2020, Stephen Kitt
-For general info: index.rst.
+For general info, see :doc:`index`.
------------------------------------------------------------------------------
-This path is binary emulation relevant aka personality types aka abi.
-When a process is executed, it's linked to an exec_domain whose
-personality is defined using values available from /proc/sys/abi.
-You can find further details about abi in include/linux/personality.h.
+The files in ``/proc/sys/abi`` can be used to see and modify
+ABI-related settings.
-Here are the files featuring in 2.6 kernel:
+Currently, these files might (depending on your configuration)
+show up in ``/proc/sys/kernel``:
-- defhandler_coff
-- defhandler_elf
-- defhandler_lcall7
-- defhandler_libcso
-- fake_utsname
-- trace
+.. contents:: :local:
-defhandler_coff
----------------
+vsyscall32 (x86)
+================
-defined value:
- PER_SCOSVR3::
+Determines whether the kernels maps a vDSO page into 32-bit processes;
+can be set to 1 to enable, or 0 to disable. Defaults to enabled if
+``CONFIG_COMPAT_VDSO`` is set, disabled otherwide.
- 0x0003 | STICKY_TIMEOUTS | WHOLE_SECONDS | SHORT_INODE
-
-defhandler_elf
---------------
-
-defined value:
- PER_LINUX::
-
- 0
-
-defhandler_lcall7
------------------
-
-defined value :
- PER_SVR4::
-
- 0x0001 | STICKY_TIMEOUTS | MMAP_PAGE_ZERO,
-
-defhandler_libsco
------------------
-
-defined value:
- PER_SVR4::
-
- 0x0001 | STICKY_TIMEOUTS | MMAP_PAGE_ZERO,
-
-fake_utsname
-------------
-
-Unused
-
-trace
------
-
-Unused
+This controls the same setting as the ``vdso32`` kernel boot
+parameter.
diff --git a/Documentation/admin-guide/tainted-kernels.rst b/Documentation/admin-guide/tainted-kernels.rst
index abf8047..f718a2e 100644
--- a/Documentation/admin-guide/tainted-kernels.rst
+++ b/Documentation/admin-guide/tainted-kernels.rst
@@ -130,7 +130,7 @@
5) ``B`` If a page-release function has found a bad page reference or some
unexpected page flags. This indicates a hardware problem or a kernel bug;
there should be other information in the log indicating why this tainting
- occured.
+ occurred.
6) ``U`` if a user or user application specifically requested that the
Tainted flag be set, ``' '`` otherwise.
diff --git a/Documentation/arm/sunxi.rst b/Documentation/arm/sunxi.rst
index b037428..62b533d 100644
--- a/Documentation/arm/sunxi.rst
+++ b/Documentation/arm/sunxi.rst
@@ -108,7 +108,7 @@
* Datasheet
- http://dl.linux-sunxi.org/H3/Allwinner_H3_Datasheet_V1.0.pdf
+ https://linux-sunxi.org/images/4/4b/Allwinner_H3_Datasheet_V1.2.pdf
- Allwinner R40 (sun8i)
diff --git a/Documentation/arm/uefi.rst b/Documentation/arm/uefi.rst
index f868330..f732f95 100644
--- a/Documentation/arm/uefi.rst
+++ b/Documentation/arm/uefi.rst
@@ -23,7 +23,7 @@
For actually enabling [U]EFI support, enable:
- CONFIG_EFI=y
-- CONFIG_EFI_VARS=y or m
+- CONFIG_EFIVAR_FS=y or m
The implementation depends on receiving information about the UEFI environment
in a Flattened Device Tree (FDT) - so is only available with CONFIG_OF.
diff --git a/Documentation/arm64/amu.rst b/Documentation/arm64/amu.rst
index 452ec8b..01f2de2 100644
--- a/Documentation/arm64/amu.rst
+++ b/Documentation/arm64/amu.rst
@@ -1,3 +1,5 @@
+.. _amu_index:
+
=======================================================
Activity Monitors Unit (AMU) extension in AArch64 Linux
=======================================================
diff --git a/Documentation/arm64/cpu-feature-registers.rst b/Documentation/arm64/cpu-feature-registers.rst
index f28853f..328e0c4 100644
--- a/Documentation/arm64/cpu-feature-registers.rst
+++ b/Documentation/arm64/cpu-feature-registers.rst
@@ -175,6 +175,8 @@
+------------------------------+---------+---------+
| Name | bits | visible |
+------------------------------+---------+---------+
+ | MTE | [11-8] | y |
+ +------------------------------+---------+---------+
| SSBS | [7-4] | y |
+------------------------------+---------+---------+
| BT | [3-0] | y |
diff --git a/Documentation/arm64/elf_hwcaps.rst b/Documentation/arm64/elf_hwcaps.rst
index 84a9fd2..bbd9cf5 100644
--- a/Documentation/arm64/elf_hwcaps.rst
+++ b/Documentation/arm64/elf_hwcaps.rst
@@ -240,6 +240,10 @@
Functionality implied by ID_AA64PFR0_EL1.BT == 0b0001.
+HWCAP2_MTE
+
+ Functionality implied by ID_AA64PFR1_EL1.MTE == 0b0010, as described
+ by Documentation/arm64/memory-tagging-extension.rst.
4. Unused AT_HWCAP bits
-----------------------
diff --git a/Documentation/arm64/index.rst b/Documentation/arm64/index.rst
index d9665d8..937634c 100644
--- a/Documentation/arm64/index.rst
+++ b/Documentation/arm64/index.rst
@@ -1,3 +1,5 @@
+.. _arm64_index:
+
==================
ARM64 Architecture
==================
@@ -14,6 +16,7 @@
hugetlbpage
legacy_instructions
memory
+ memory-tagging-extension
perf
pointer-authentication
silicon-errata
diff --git a/Documentation/arm64/memory-tagging-extension.rst b/Documentation/arm64/memory-tagging-extension.rst
new file mode 100644
index 0000000..034d37c
--- /dev/null
+++ b/Documentation/arm64/memory-tagging-extension.rst
@@ -0,0 +1,305 @@
+===============================================
+Memory Tagging Extension (MTE) in AArch64 Linux
+===============================================
+
+Authors: Vincenzo Frascino <vincenzo.frascino@arm.com>
+ Catalin Marinas <catalin.marinas@arm.com>
+
+Date: 2020-02-25
+
+This document describes the provision of the Memory Tagging Extension
+functionality in AArch64 Linux.
+
+Introduction
+============
+
+ARMv8.5 based processors introduce the Memory Tagging Extension (MTE)
+feature. MTE is built on top of the ARMv8.0 virtual address tagging TBI
+(Top Byte Ignore) feature and allows software to access a 4-bit
+allocation tag for each 16-byte granule in the physical address space.
+Such memory range must be mapped with the Normal-Tagged memory
+attribute. A logical tag is derived from bits 59-56 of the virtual
+address used for the memory access. A CPU with MTE enabled will compare
+the logical tag against the allocation tag and potentially raise an
+exception on mismatch, subject to system registers configuration.
+
+Userspace Support
+=================
+
+When ``CONFIG_ARM64_MTE`` is selected and Memory Tagging Extension is
+supported by the hardware, the kernel advertises the feature to
+userspace via ``HWCAP2_MTE``.
+
+PROT_MTE
+--------
+
+To access the allocation tags, a user process must enable the Tagged
+memory attribute on an address range using a new ``prot`` flag for
+``mmap()`` and ``mprotect()``:
+
+``PROT_MTE`` - Pages allow access to the MTE allocation tags.
+
+The allocation tag is set to 0 when such pages are first mapped in the
+user address space and preserved on copy-on-write. ``MAP_SHARED`` is
+supported and the allocation tags can be shared between processes.
+
+**Note**: ``PROT_MTE`` is only supported on ``MAP_ANONYMOUS`` and
+RAM-based file mappings (``tmpfs``, ``memfd``). Passing it to other
+types of mapping will result in ``-EINVAL`` returned by these system
+calls.
+
+**Note**: The ``PROT_MTE`` flag (and corresponding memory type) cannot
+be cleared by ``mprotect()``.
+
+**Note**: ``madvise()`` memory ranges with ``MADV_DONTNEED`` and
+``MADV_FREE`` may have the allocation tags cleared (set to 0) at any
+point after the system call.
+
+Tag Check Faults
+----------------
+
+When ``PROT_MTE`` is enabled on an address range and a mismatch between
+the logical and allocation tags occurs on access, there are three
+configurable behaviours:
+
+- *Ignore* - This is the default mode. The CPU (and kernel) ignores the
+ tag check fault.
+
+- *Synchronous* - The kernel raises a ``SIGSEGV`` synchronously, with
+ ``.si_code = SEGV_MTESERR`` and ``.si_addr = <fault-address>``. The
+ memory access is not performed. If ``SIGSEGV`` is ignored or blocked
+ by the offending thread, the containing process is terminated with a
+ ``coredump``.
+
+- *Asynchronous* - The kernel raises a ``SIGSEGV``, in the offending
+ thread, asynchronously following one or multiple tag check faults,
+ with ``.si_code = SEGV_MTEAERR`` and ``.si_addr = 0`` (the faulting
+ address is unknown).
+
+The user can select the above modes, per thread, using the
+``prctl(PR_SET_TAGGED_ADDR_CTRL, flags, 0, 0, 0)`` system call where
+``flags`` contain one of the following values in the ``PR_MTE_TCF_MASK``
+bit-field:
+
+- ``PR_MTE_TCF_NONE`` - *Ignore* tag check faults
+- ``PR_MTE_TCF_SYNC`` - *Synchronous* tag check fault mode
+- ``PR_MTE_TCF_ASYNC`` - *Asynchronous* tag check fault mode
+
+The current tag check fault mode can be read using the
+``prctl(PR_GET_TAGGED_ADDR_CTRL, 0, 0, 0, 0)`` system call.
+
+Tag checking can also be disabled for a user thread by setting the
+``PSTATE.TCO`` bit with ``MSR TCO, #1``.
+
+**Note**: Signal handlers are always invoked with ``PSTATE.TCO = 0``,
+irrespective of the interrupted context. ``PSTATE.TCO`` is restored on
+``sigreturn()``.
+
+**Note**: There are no *match-all* logical tags available for user
+applications.
+
+**Note**: Kernel accesses to the user address space (e.g. ``read()``
+system call) are not checked if the user thread tag checking mode is
+``PR_MTE_TCF_NONE`` or ``PR_MTE_TCF_ASYNC``. If the tag checking mode is
+``PR_MTE_TCF_SYNC``, the kernel makes a best effort to check its user
+address accesses, however it cannot always guarantee it.
+
+Excluding Tags in the ``IRG``, ``ADDG`` and ``SUBG`` instructions
+-----------------------------------------------------------------
+
+The architecture allows excluding certain tags to be randomly generated
+via the ``GCR_EL1.Exclude`` register bit-field. By default, Linux
+excludes all tags other than 0. A user thread can enable specific tags
+in the randomly generated set using the ``prctl(PR_SET_TAGGED_ADDR_CTRL,
+flags, 0, 0, 0)`` system call where ``flags`` contains the tags bitmap
+in the ``PR_MTE_TAG_MASK`` bit-field.
+
+**Note**: The hardware uses an exclude mask but the ``prctl()``
+interface provides an include mask. An include mask of ``0`` (exclusion
+mask ``0xffff``) results in the CPU always generating tag ``0``.
+
+Initial process state
+---------------------
+
+On ``execve()``, the new process has the following configuration:
+
+- ``PR_TAGGED_ADDR_ENABLE`` set to 0 (disabled)
+- Tag checking mode set to ``PR_MTE_TCF_NONE``
+- ``PR_MTE_TAG_MASK`` set to 0 (all tags excluded)
+- ``PSTATE.TCO`` set to 0
+- ``PROT_MTE`` not set on any of the initial memory maps
+
+On ``fork()``, the new process inherits the parent's configuration and
+memory map attributes with the exception of the ``madvise()`` ranges
+with ``MADV_WIPEONFORK`` which will have the data and tags cleared (set
+to 0).
+
+The ``ptrace()`` interface
+--------------------------
+
+``PTRACE_PEEKMTETAGS`` and ``PTRACE_POKEMTETAGS`` allow a tracer to read
+the tags from or set the tags to a tracee's address space. The
+``ptrace()`` system call is invoked as ``ptrace(request, pid, addr,
+data)`` where:
+
+- ``request`` - one of ``PTRACE_PEEKMTETAGS`` or ``PTRACE_POKEMTETAGS``.
+- ``pid`` - the tracee's PID.
+- ``addr`` - address in the tracee's address space.
+- ``data`` - pointer to a ``struct iovec`` where ``iov_base`` points to
+ a buffer of ``iov_len`` length in the tracer's address space.
+
+The tags in the tracer's ``iov_base`` buffer are represented as one
+4-bit tag per byte and correspond to a 16-byte MTE tag granule in the
+tracee's address space.
+
+**Note**: If ``addr`` is not aligned to a 16-byte granule, the kernel
+will use the corresponding aligned address.
+
+``ptrace()`` return value:
+
+- 0 - tags were copied, the tracer's ``iov_len`` was updated to the
+ number of tags transferred. This may be smaller than the requested
+ ``iov_len`` if the requested address range in the tracee's or the
+ tracer's space cannot be accessed or does not have valid tags.
+- ``-EPERM`` - the specified process cannot be traced.
+- ``-EIO`` - the tracee's address range cannot be accessed (e.g. invalid
+ address) and no tags copied. ``iov_len`` not updated.
+- ``-EFAULT`` - fault on accessing the tracer's memory (``struct iovec``
+ or ``iov_base`` buffer) and no tags copied. ``iov_len`` not updated.
+- ``-EOPNOTSUPP`` - the tracee's address does not have valid tags (never
+ mapped with the ``PROT_MTE`` flag). ``iov_len`` not updated.
+
+**Note**: There are no transient errors for the requests above, so user
+programs should not retry in case of a non-zero system call return.
+
+``PTRACE_GETREGSET`` and ``PTRACE_SETREGSET`` with ``addr ==
+``NT_ARM_TAGGED_ADDR_CTRL`` allow ``ptrace()`` access to the tagged
+address ABI control and MTE configuration of a process as per the
+``prctl()`` options described in
+Documentation/arm64/tagged-address-abi.rst and above. The corresponding
+``regset`` is 1 element of 8 bytes (``sizeof(long))``).
+
+Example of correct usage
+========================
+
+*MTE Example code*
+
+.. code-block:: c
+
+ /*
+ * To be compiled with -march=armv8.5-a+memtag
+ */
+ #include <errno.h>
+ #include <stdint.h>
+ #include <stdio.h>
+ #include <stdlib.h>
+ #include <unistd.h>
+ #include <sys/auxv.h>
+ #include <sys/mman.h>
+ #include <sys/prctl.h>
+
+ /*
+ * From arch/arm64/include/uapi/asm/hwcap.h
+ */
+ #define HWCAP2_MTE (1 << 18)
+
+ /*
+ * From arch/arm64/include/uapi/asm/mman.h
+ */
+ #define PROT_MTE 0x20
+
+ /*
+ * From include/uapi/linux/prctl.h
+ */
+ #define PR_SET_TAGGED_ADDR_CTRL 55
+ #define PR_GET_TAGGED_ADDR_CTRL 56
+ # define PR_TAGGED_ADDR_ENABLE (1UL << 0)
+ # define PR_MTE_TCF_SHIFT 1
+ # define PR_MTE_TCF_NONE (0UL << PR_MTE_TCF_SHIFT)
+ # define PR_MTE_TCF_SYNC (1UL << PR_MTE_TCF_SHIFT)
+ # define PR_MTE_TCF_ASYNC (2UL << PR_MTE_TCF_SHIFT)
+ # define PR_MTE_TCF_MASK (3UL << PR_MTE_TCF_SHIFT)
+ # define PR_MTE_TAG_SHIFT 3
+ # define PR_MTE_TAG_MASK (0xffffUL << PR_MTE_TAG_SHIFT)
+
+ /*
+ * Insert a random logical tag into the given pointer.
+ */
+ #define insert_random_tag(ptr) ({ \
+ uint64_t __val; \
+ asm("irg %0, %1" : "=r" (__val) : "r" (ptr)); \
+ __val; \
+ })
+
+ /*
+ * Set the allocation tag on the destination address.
+ */
+ #define set_tag(tagged_addr) do { \
+ asm volatile("stg %0, [%0]" : : "r" (tagged_addr) : "memory"); \
+ } while (0)
+
+ int main()
+ {
+ unsigned char *a;
+ unsigned long page_sz = sysconf(_SC_PAGESIZE);
+ unsigned long hwcap2 = getauxval(AT_HWCAP2);
+
+ /* check if MTE is present */
+ if (!(hwcap2 & HWCAP2_MTE))
+ return EXIT_FAILURE;
+
+ /*
+ * Enable the tagged address ABI, synchronous MTE tag check faults and
+ * allow all non-zero tags in the randomly generated set.
+ */
+ if (prctl(PR_SET_TAGGED_ADDR_CTRL,
+ PR_TAGGED_ADDR_ENABLE | PR_MTE_TCF_SYNC | (0xfffe << PR_MTE_TAG_SHIFT),
+ 0, 0, 0)) {
+ perror("prctl() failed");
+ return EXIT_FAILURE;
+ }
+
+ a = mmap(0, page_sz, PROT_READ | PROT_WRITE,
+ MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
+ if (a == MAP_FAILED) {
+ perror("mmap() failed");
+ return EXIT_FAILURE;
+ }
+
+ /*
+ * Enable MTE on the above anonymous mmap. The flag could be passed
+ * directly to mmap() and skip this step.
+ */
+ if (mprotect(a, page_sz, PROT_READ | PROT_WRITE | PROT_MTE)) {
+ perror("mprotect() failed");
+ return EXIT_FAILURE;
+ }
+
+ /* access with the default tag (0) */
+ a[0] = 1;
+ a[1] = 2;
+
+ printf("a[0] = %hhu a[1] = %hhu\n", a[0], a[1]);
+
+ /* set the logical and allocation tags */
+ a = (unsigned char *)insert_random_tag(a);
+ set_tag(a);
+
+ printf("%p\n", a);
+
+ /* non-zero tag access */
+ a[0] = 3;
+ printf("a[0] = %hhu a[1] = %hhu\n", a[0], a[1]);
+
+ /*
+ * If MTE is enabled correctly the next instruction will generate an
+ * exception.
+ */
+ printf("Expecting SIGSEGV...\n");
+ a[16] = 0xdd;
+
+ /* this should not be printed in the PR_MTE_TCF_SYNC mode */
+ printf("...haven't got one\n");
+
+ return EXIT_FAILURE;
+ }
diff --git a/Documentation/conf.py b/Documentation/conf.py
index c503188..0a102d5 100644
--- a/Documentation/conf.py
+++ b/Documentation/conf.py
@@ -36,10 +36,23 @@
# Add any Sphinx extension module names here, as strings. They can be
# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
# ones.
-extensions = ['kerneldoc', 'rstFlatTable', 'kernel_include', 'cdomain',
+extensions = ['kerneldoc', 'rstFlatTable', 'kernel_include',
'kfigure', 'sphinx.ext.ifconfig', 'automarkup',
'maintainers_include', 'sphinx.ext.autosectionlabel' ]
+#
+# cdomain is badly broken in Sphinx 3+. Leaving it out generates *most*
+# of the docs correctly, but not all. Scream bloody murder but allow
+# the process to proceed; hopefully somebody will fix this properly soon.
+#
+if major >= 3:
+ sys.stderr.write('''WARNING: The kernel documentation build process
+ does not work correctly with Sphinx v3.0 and above. Expect errors
+ in the generated output.
+ ''')
+else:
+ extensions.append('cdomain')
+
# Ensure that autosectionlabel will produce unique names
autosectionlabel_prefix_document = True
autosectionlabel_maxdepth = 2
diff --git a/Documentation/core-api/cpu_hotplug.rst b/Documentation/core-api/cpu_hotplug.rst
index 298c9c8..a2c96be 100644
--- a/Documentation/core-api/cpu_hotplug.rst
+++ b/Documentation/core-api/cpu_hotplug.rst
@@ -30,7 +30,7 @@
Command Line Switches
=====================
``maxcpus=n``
- Restrict boot time CPUs to *n*. Say if you have fourV CPUs, using
+ Restrict boot time CPUs to *n*. Say if you have four CPUs, using
``maxcpus=2`` will only boot two. You can choose to bring the
other CPUs later online.
diff --git a/Documentation/crypto/userspace-if.rst b/Documentation/crypto/userspace-if.rst
index 52019e9..b45dabb 100644
--- a/Documentation/crypto/userspace-if.rst
+++ b/Documentation/crypto/userspace-if.rst
@@ -296,15 +296,16 @@
struct sockaddr_alg sa = {
.salg_family = AF_ALG,
- .salg_type = "rng", /* this selects the symmetric cipher */
- .salg_name = "drbg_nopr_sha256" /* this is the cipher name */
+ .salg_type = "rng", /* this selects the random number generator */
+ .salg_name = "drbg_nopr_sha256" /* this is the RNG name */
};
Depending on the RNG type, the RNG must be seeded. The seed is provided
using the setsockopt interface to set the key. For example, the
ansi_cprng requires a seed. The DRBGs do not require a seed, but may be
-seeded.
+seeded. The seed is also known as a *Personalization String* in NIST SP 800-90A
+standard.
Using the read()/recvmsg() system calls, random numbers can be obtained.
The kernel generates at most 128 bytes in one call. If user space
@@ -314,6 +315,16 @@
system call multiple times. In this case, the returned file descriptors
have the same state.
+Following CAVP testing interfaces are enabled when kernel is built with
+CRYPTO_USER_API_RNG_CAVP option:
+
+- the concatenation of *Entropy* and *Nonce* can be provided to the RNG via
+ ALG_SET_DRBG_ENTROPY setsockopt interface. Setting the entropy requires
+ CAP_SYS_ADMIN permission.
+
+- *Additional Data* can be provided using the send()/sendmsg() system calls,
+ but only after the entropy has been set.
+
Zero-Copy Interface
-------------------
@@ -377,6 +388,9 @@
provided ciphertext is assumed to contain an authentication tag of
the given size (see section about AEAD memory layout below).
+- ALG_SET_DRBG_ENTROPY -- Setting the entropy of the random number generator.
+ This option is applicable to RNG cipher type only.
+
User space API example
----------------------
diff --git a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml
index 1d5e9bc..33f3010 100644
--- a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml
+++ b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml
@@ -62,7 +62,7 @@
};
mmc@5b010000 {
- compatible = "fsl,imx8qxp-usdhc";
+ compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x5b010000 0x10000>;
clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC0_IPG_CLK>,
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
index 4731921..ac63ae4a 100644
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
@@ -51,8 +51,16 @@
- vi
- Tegra210:
- power-domains: Must include venc powergate node as vi is in VE partition.
- - Tegra210 has CSI part of VI sharing same host interface and register space.
- So, VI device node should have CSI child node.
+
+ ports (optional node)
+ vi can have optional ports node and max 6 ports are supported. Each port
+ should have single 'endpoint' child node. All port nodes are grouped under
+ ports node. Please refer to the bindings defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt
+
+ csi (required node)
+ Tegra210 has CSI part of VI sharing same host interface and register space.
+ So, VI device node should have CSI child node.
- csi: mipi csi interface to vi
@@ -65,6 +73,46 @@
- power-domains: Must include sor powergate node as csicil is in
SOR partition.
+ channel (optional nodes)
+ Maximum 6 channels are supported with each csi brick as either x4 or x2
+ based on hw connectivity to sensor.
+
+ Required properties:
+ - reg: csi port number. Valid port numbers are 0 through 5.
+ - nvidia,mipi-calibrate: Should contain a phandle and a specifier
+ specifying which pads are used by this CSI port and need to be
+ calibrated. See also ../display/tegra/nvidia,tegra114-mipi.txt.
+
+ Each channel node must contain 2 port nodes which can be grouped
+ under 'ports' node and each port should have a single child 'endpoint'
+ node.
+
+ ports node
+ Please refer to the bindings defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt
+
+ ports node must contain below 2 port nodes.
+ port@0 with single child 'endpoint' node always a sink.
+ port@1 with single child 'endpoint' node always a source.
+
+ port@0 (required node)
+ Required properties:
+ - reg: 0
+
+ endpoint (required node)
+ Required properties:
+ - data-lanes: an array of data lane from 1 to 4. Valid array
+ lengths are 1/2/4.
+ - remote-endpoint: phandle to sensor 'endpoint' node.
+
+ port@1 (required node)
+ Required properties:
+ - reg: 1
+
+ endpoint (required node)
+ Required properties:
+ - remote-endpoint: phandle to vi port 'endpoint' node.
+
- epp: encoder pre-processor
Required properties:
@@ -340,6 +388,18 @@
ranges = <0x0 0x0 0x54080000 0x2000>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ imx219_vi_in0: endpoint {
+ remote-endpoint = <&imx219_csi_out0>;
+ };
+ };
+ };
+
csi@838 {
compatible = "nvidia,tegra210-csi";
reg = <0x838 0x1300>;
@@ -362,6 +422,34 @@
<&tegra_car TEGRA210_CLK_CSI_TPG>;
clock-names = "csi", "cilab", "cilcd", "cile", "csi_tpg";
power-domains = <&pd_sor>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ reg = <0>;
+ nvidia,mipi-calibrate = <&mipi 0x001>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ imx219_csi_in0: endpoint {
+ data-lanes = <1 2>;
+ remote-endpoint = <&imx219_out0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ imx219_csi_out0: endpoint {
+ remote-endpoint = <&imx219_vi_in0>;
+ };
+ };
+ };
+ };
};
};
diff --git a/Documentation/devicetree/bindings/edac/amazon,al-mc-edac.yaml b/Documentation/devicetree/bindings/edac/amazon,al-mc-edac.yaml
new file mode 100644
index 0000000..a25387d
--- /dev/null
+++ b/Documentation/devicetree/bindings/edac/amazon,al-mc-edac.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/edac/amazon,al-mc-edac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amazon's Annapurna Labs Memory Controller EDAC
+
+maintainers:
+ - Talel Shenhar <talel@amazon.com>
+ - Talel Shenhar <talelshenhar@gmail.com>
+
+description: |
+ EDAC node is defined to describe on-chip error detection and correction for
+ Amazon's Annapurna Labs Memory Controller.
+
+properties:
+
+ compatible:
+ const: amazon,al-mc-edac
+
+ reg:
+ maxItems: 1
+
+ "#address-cells":
+ const: 2
+
+ "#size-cells":
+ const: 2
+
+ interrupts:
+ minItems: 1
+ maxItems: 2
+ items:
+ - description: uncorrectable error interrupt
+ - description: correctable error interrupt
+
+ interrupt-names:
+ minItems: 1
+ maxItems: 2
+ items:
+ - const: ue
+ - const: ce
+
+required:
+ - compatible
+ - reg
+ - "#address-cells"
+ - "#size-cells"
+
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ edac@f0080000 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "amazon,al-mc-edac";
+ reg = <0x0 0xf0080000 0x0 0x00010000>;
+ interrupt-parent = <&amazon_al_system_fabric>;
+ interrupt-names = "ue";
+ interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/actions,owl-sirq.yaml b/Documentation/devicetree/bindings/interrupt-controller/actions,owl-sirq.yaml
new file mode 100644
index 0000000..5da333c
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/actions,owl-sirq.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/actions,owl-sirq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Actions Semi Owl SoCs SIRQ interrupt controller
+
+maintainers:
+ - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ - Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
+
+description: |
+ This interrupt controller is found in the Actions Semi Owl SoCs (S500, S700
+ and S900) and provides support for handling up to 3 external interrupt lines.
+
+properties:
+ compatible:
+ enum:
+ - actions,s500-sirq
+ - actions,s700-sirq
+ - actions,s900-sirq
+
+ reg:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+ description:
+ The first cell is the input IRQ number, between 0 and 2, while the second
+ cell is the trigger type as defined in interrupt.txt in this directory.
+
+ 'interrupts':
+ description: |
+ Contains the GIC SPI IRQs mapped to the external interrupt lines.
+ They shall be specified sequentially from output 0 to 2.
+ minItems: 3
+ maxItems: 3
+
+required:
+ - compatible
+ - reg
+ - interrupt-controller
+ - '#interrupt-cells'
+ - 'interrupts'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ sirq: interrupt-controller@b01b0200 {
+ compatible = "actions,s500-sirq";
+ reg = <0xb01b0200 0x4>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, /* SIRQ0 */
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, /* SIRQ1 */
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; /* SIRQ2 */
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mstar,mst-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/mstar,mst-intc.yaml
new file mode 100644
index 0000000..bbf0f26
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/mstar,mst-intc.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/mstar,mst-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MStar Interrupt Controller
+
+maintainers:
+ - Mark-PK Tsai <mark-pk.tsai@mediatek.com>
+
+description: |+
+ MStar, SigmaStar and Mediatek TV SoCs contain multiple legacy
+ interrupt controllers that routes interrupts to the GIC.
+
+ The HW block exposes a number of interrupt controllers, each
+ can support up to 64 interrupts.
+
+properties:
+ compatible:
+ const: mstar,mst-intc
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 3
+ description: |
+ Use the same format as specified by GIC in arm,gic.yaml.
+
+ reg:
+ maxItems: 1
+
+ mstar,irqs-map-range:
+ description: |
+ The range <start, end> of parent interrupt controller's interrupt
+ lines that are hardwired to mstar interrupt controller.
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ items:
+ minItems: 2
+ maxItems: 2
+
+ mstar,intc-no-eoi:
+ description:
+ Mark this controller has no End Of Interrupt(EOI) implementation.
+ type: boolean
+
+required:
+ - compatible
+ - reg
+ - mstar,irqs-map-range
+
+additionalProperties: false
+
+examples:
+ - |
+ mst_intc0: interrupt-controller@1f2032d0 {
+ compatible = "mstar,mst-intc";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ reg = <0x1f2032d0 0x30>;
+ mstar,irqs-map-range = <0 63>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt b/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt
index 086ff08..2db59df 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt
@@ -2,7 +2,8 @@
Synopsys DesignWare provides interrupt controller IP for APB known as
dw_apb_ictl. The IP is used as secondary interrupt controller in some SoCs with
-APB bus, e.g. Marvell Armada 1500.
+APB bus, e.g. Marvell Armada 1500. It can also be used as primary interrupt
+controller in some SoCs, e.g. Hisilicon SD5203.
Required properties:
- compatible: shall be "snps,dw-apb-ictl"
@@ -10,6 +11,8 @@
region starting with ENABLE_LOW register
- interrupt-controller: identifies the node as an interrupt controller
- #interrupt-cells: number of cells to encode an interrupt-specifier, shall be 1
+
+Additional required property when it's used as secondary interrupt controller:
- interrupts: interrupt reference to primary interrupt controller
The interrupt sources map to the corresponding bits in the interrupt
@@ -21,6 +24,7 @@
- (optional) fast interrupts start at 64.
Example:
+ /* dw_apb_ictl is used as secondary interrupt controller */
aic: interrupt-controller@3000 {
compatible = "snps,dw-apb-ictl";
reg = <0x3000 0xc00>;
@@ -29,3 +33,11 @@
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
};
+
+ /* dw_apb_ictl is used as primary interrupt controller */
+ vic: interrupt-controller@10130000 {
+ compatible = "snps,dw-apb-ictl";
+ reg = <0x10130000 0x1000>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml
new file mode 100644
index 0000000..bbf79d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/ti,pruss-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI PRU-ICSS Local Interrupt Controller
+
+maintainers:
+ - Suman Anna <s-anna@ti.com>
+
+description: |
+ Each PRU-ICSS has a single interrupt controller instance that is common
+ to all the PRU cores. Most interrupt controllers can route 64 input events
+ which are then mapped to 10 possible output interrupts through two levels
+ of mapping. The input events can be triggered by either the PRUs and/or
+ various other PRUSS internal and external peripherals. The first 2 output
+ interrupts (0, 1) are fed exclusively to the internal PRU cores, with the
+ remaining 8 (2 through 9) connected to external interrupt controllers
+ including the MPU and/or other PRUSS instances, DSPs or devices.
+
+ The property "ti,irqs-reserved" is used for denoting the connection
+ differences on the output interrupts 2 through 9. If this property is not
+ defined, it implies that all the PRUSS INTC output interrupts 2 through 9
+ (host_intr0 through host_intr7) are connected exclusively to the Arm interrupt
+ controller.
+
+ The K3 family of SoCs can handle 160 input events that can be mapped to 20
+ different possible output interrupts. The additional output interrupts (10
+ through 19) are connected to new sub-modules within the ICSSG instances.
+
+ This interrupt-controller node should be defined as a child node of the
+ corresponding PRUSS node. The node should be named "interrupt-controller".
+
+properties:
+ compatible:
+ enum:
+ - ti,pruss-intc
+ - ti,icssg-intc
+ description: |
+ Use "ti,pruss-intc" for OMAP-L13x/AM18x/DA850 SoCs,
+ AM335x family of SoCs,
+ AM437x family of SoCs,
+ AM57xx family of SoCs
+ 66AK2G family of SoCs
+ Use "ti,icssg-intc" for K3 AM65x & J721E family of SoCs
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 1
+ maxItems: 8
+ description: |
+ All the interrupts generated towards the main host processor in the SoC.
+ A shared interrupt can be skipped if the desired destination and usage is
+ by a different processor/device.
+
+ interrupt-names:
+ minItems: 1
+ maxItems: 8
+ items:
+ pattern: host_intr[0-7]
+ description: |
+ Should use one of the above names for each valid host event interrupt
+ connected to Arm interrupt controller, the name should match the
+ corresponding host event interrupt number.
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 3
+ description: |
+ Client users shall use the PRU System event number (the interrupt source
+ that the client is interested in) [cell 1], PRU channel [cell 2] and PRU
+ host_event (target) [cell 3] as the value of the interrupts property in
+ their node. The system events can be mapped to some output host
+ interrupts through 2 levels of many-to-one mapping i.e. events to channel
+ mapping and channels to host interrupts so through this property entire
+ mapping is provided.
+
+ ti,irqs-reserved:
+ $ref: /schemas/types.yaml#definitions/uint8
+ description: |
+ Bitmask of host interrupts between 0 and 7 (corresponding to PRUSS INTC
+ output interrupts 2 through 9) that are not connected to the Arm interrupt
+ controller or are shared and used by other devices or processors in the
+ SoC. Define this property when any of 8 interrupts should not be handled
+ by Arm interrupt controller.
+ Eg: - AM437x and 66AK2G SoCs do not have "host_intr5" interrupt
+ connected to MPU
+ - AM65x and J721E SoCs have "host_intr5", "host_intr6" and
+ "host_intr7" interrupts connected to MPU, and other ICSSG
+ instances.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - interrupt-controller
+ - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ /* AM33xx PRU-ICSS */
+ pruss: pruss@0 {
+ compatible = "ti,am3356-pruss";
+ reg = <0x0 0x80000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pruss_intc: interrupt-controller@20000 {
+ compatible = "ti,pruss-intc";
+ reg = <0x20000 0x2000>;
+ interrupts = <20 21 22 23 24 25 26 27>;
+ interrupt-names = "host_intr0", "host_intr1",
+ "host_intr2", "host_intr3",
+ "host_intr4", "host_intr5",
+ "host_intr6", "host_intr7";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+ };
+
+ - |
+
+ /* AM4376 PRU-ICSS */
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ pruss@0 {
+ compatible = "ti,am4376-pruss";
+ reg = <0x0 0x40000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ interrupt-controller@20000 {
+ compatible = "ti,pruss-intc";
+ reg = <0x20000 0x2000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host_intr0", "host_intr1",
+ "host_intr2", "host_intr3",
+ "host_intr4",
+ "host_intr6", "host_intr7";
+ ti,irqs-reserved = /bits/ 8 <0x20>; /* BIT(5) */
+ };
+ };
diff --git a/Documentation/devicetree/bindings/media/gpio-ir-receiver.txt b/Documentation/devicetree/bindings/media/gpio-ir-receiver.txt
index 58261fb..108bf43 100644
--- a/Documentation/devicetree/bindings/media/gpio-ir-receiver.txt
+++ b/Documentation/devicetree/bindings/media/gpio-ir-receiver.txt
@@ -7,6 +7,8 @@
Optional properties:
- linux,rc-map-name: see rc.txt file in the same
directory.
+ - linux,autosuspend-period: autosuspend delay time,
+ the unit is milisecond.
Example node:
@@ -14,4 +16,5 @@
compatible = "gpio-ir-receiver";
gpios = <&gpio0 19 1>;
linux,rc-map-name = "rc-rc6-mce";
+ linux,autosuspend-period = <125>;
};
diff --git a/Documentation/devicetree/bindings/media/i2c/ov5647.txt b/Documentation/devicetree/bindings/media/i2c/ov5647.txt
deleted file mode 100644
index 22e4494..0000000
--- a/Documentation/devicetree/bindings/media/i2c/ov5647.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-Omnivision OV5647 raw image sensor
----------------------------------
-
-OV5647 is a raw image sensor with MIPI CSI-2 and CCP2 image data interfaces
-and CCI (I2C compatible) control bus.
-
-Required properties:
-
-- compatible : "ovti,ov5647".
-- reg : I2C slave address of the sensor.
-- clocks : Reference to the xclk clock.
-
-The common video interfaces bindings (see video-interfaces.txt) should be
-used to specify link to the image data receiver. The OV5647 device
-node should contain one 'port' child node with an 'endpoint' subnode.
-
-Endpoint node mandatory properties:
-
-- remote-endpoint: A phandle to the bus receiver's endpoint node.
-
-Example:
-
- i2c@2000 {
- ...
- ov: camera@36 {
- compatible = "ovti,ov5647";
- reg = <0x36>;
- clocks = <&camera_clk>;
- port {
- camera_1: endpoint {
- remote-endpoint = <&csi1_ep1>;
- };
- };
- };
- };
diff --git a/Documentation/devicetree/bindings/media/i2c/ov5647.yaml b/Documentation/devicetree/bindings/media/i2c/ov5647.yaml
new file mode 100644
index 0000000..280c62a
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ov5647.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ov5647.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV5647 raw image sensor
+
+maintainers:
+ - Dave Stevenson <dave.stevenson@raspberrypi.com>
+ - Jacopo Mondi <jacopo@jmondi.org>
+
+description: |-
+ The OV5647 is a raw image sensor with MIPI CSI-2 and CCP2 image data
+ interfaces and CCI (I2C compatible) control bus.
+
+properties:
+ compatible:
+ const: ovti,ov5647
+
+ reg:
+ description: I2C device address.
+ maxItems: 1
+
+ clocks:
+ description: Reference to the xclk clock.
+ maxItems: 1
+
+ pwdn-gpios:
+ description: Reference to the GPIO connected to the pwdn pin. Active high.
+ maxItems: 1
+
+ port:
+ type: object
+ description: |-
+ Should contain one endpoint sub-node used to model connection to the
+ video receiver according to the specification defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+ properties:
+ endpoint:
+ type: object
+
+ properties:
+ remote-endpoint:
+ description: |-
+ phandle to the video receiver input port.
+
+ clock-noncontinuous:
+ type: boolean
+ description: |-
+ Set to true to allow MIPI CSI-2 non-continuous clock operations.
+
+ additionalProperties: false
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ov5647: camera@36 {
+ compatible = "ovti,ov5647";
+ reg = <0x36>;
+ clocks = <&camera_clk>;
+ pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
+
+ port {
+ camera_out: endpoint {
+ remote-endpoint = <&csi1_ep1>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt
new file mode 100644
index 0000000..736be7c
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt
@@ -0,0 +1,35 @@
+* MediaTek JPEG Encoder
+
+MediaTek JPEG Encoder is the JPEG encode hardware present in MediaTek SoCs
+
+Required properties:
+- compatible : "mediatek,mt2701-jpgenc"
+ followed by "mediatek,mtk-jpgenc"
+- reg : physical base address of the JPEG encoder registers and length of
+ memory mapped region.
+- interrupts : interrupt number to the interrupt controller.
+- clocks: device clocks, see
+ Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
+- clock-names: must contain "jpgenc". It is the clock of JPEG encoder.
+- power-domains: a phandle to the power domain, see
+ Documentation/devicetree/bindings/power/power_domain.txt for details.
+- mediatek,larb: must contain the local arbiters in the current SoCs, see
+ Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
+ for details.
+- iommus: should point to the respective IOMMU block with master port as
+ argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
+ for details.
+
+Example:
+ jpegenc: jpegenc@1500a000 {
+ compatible = "mediatek,mt2701-jpgenc",
+ "mediatek,mtk-jpgenc";
+ reg = <0 0x1500a000 0 0x1000>;
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&imgsys CLK_IMG_VENC>;
+ clock-names = "jpgenc";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+ mediatek,larb = <&larb2>;
+ iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>,
+ <&iommu MT2701_M4U_PORT_JPGENC_BSDMA>;
+ };
diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
index b6b5dde..8217424 100644
--- a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
+++ b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
@@ -4,8 +4,9 @@
supports high resolution encoding and decoding functionalities.
Required properties:
-- compatible : "mediatek,mt8173-vcodec-enc" for encoder
- "mediatek,mt8173-vcodec-dec" for decoder.
+- compatible : "mediatek,mt8173-vcodec-enc" for MT8173 encoder
+ "mediatek,mt8183-vcodec-enc" for MT8183 encoder.
+ "mediatek,mt8173-vcodec-dec" for MT8173 decoder.
- reg : Physical base address of the video codec registers and length of
memory mapped region.
- interrupts : interrupt number to the cpu.
@@ -19,7 +20,9 @@
- iommus : should point to the respective IOMMU block with master port as
argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
for details.
-- mediatek,vpu : the node of video processor unit
+One of the two following nodes:
+- mediatek,vpu : the node of the video processor unit, if using VPU.
+- mediatek,scp : the node of the SCP unit, if using SCP.
Example:
diff --git a/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml
index 55f2d67..04e303b 100644
--- a/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml
@@ -25,12 +25,16 @@
maxItems: 1
power-domains:
- maxItems: 2
+ minItems: 2
+ maxItems: 3
power-domain-names:
+ minItems: 2
+ maxItems: 3
items:
- const: venus
- const: vcodec0
+ - const: cx
clocks:
maxItems: 5
diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml
index 157dff8..90013d4 100644
--- a/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml
@@ -25,13 +25,17 @@
maxItems: 1
power-domains:
- maxItems: 3
+ minItems: 3
+ maxItems: 4
power-domain-names:
+ minItems: 3
+ maxItems: 4
items:
- const: venus
- const: vcodec0
- const: vcodec1
+ - const: cx
clocks:
maxItems: 7
diff --git a/Documentation/devicetree/bindings/media/renesas,csi2.yaml b/Documentation/devicetree/bindings/media/renesas,csi2.yaml
index 6d28258..533c2f1 100644
--- a/Documentation/devicetree/bindings/media/renesas,csi2.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,csi2.yaml
@@ -22,6 +22,7 @@
- renesas,r8a774a1-csi2 # RZ/G2M
- renesas,r8a774b1-csi2 # RZ/G2N
- renesas,r8a774c0-csi2 # RZ/G2E
+ - renesas,r8a774e1-csi2 # RZ/G2H
- renesas,r8a7795-csi2 # R-Car H3
- renesas,r8a7796-csi2 # R-Car M3-W
- renesas,r8a77965-csi2 # R-Car M3-N
diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml
index 53c0a72..ad2fe66 100644
--- a/Documentation/devicetree/bindings/media/renesas,vin.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml
@@ -24,6 +24,7 @@
oneOf:
- items:
- enum:
+ - renesas,vin-r8a7742 # RZ/G1H
- renesas,vin-r8a7743 # RZ/G1M
- renesas,vin-r8a7744 # RZ/G1N
- renesas,vin-r8a7745 # RZ/G1E
@@ -40,6 +41,7 @@
- renesas,vin-r8a774a1 # RZ/G2M
- renesas,vin-r8a774b1 # RZ/G2N
- renesas,vin-r8a774c0 # RZ/G2E
+ - renesas,vin-r8a774e1 # RZ/G2H
- renesas,vin-r8a7778 # R-Car M1
- renesas,vin-r8a7779 # R-Car H1
- renesas,vin-r8a7795 # R-Car H3
diff --git a/Documentation/devicetree/bindings/media/samsung-fimc.txt b/Documentation/devicetree/bindings/media/samsung-fimc.txt
index f91b9dc..2044752 100644
--- a/Documentation/devicetree/bindings/media/samsung-fimc.txt
+++ b/Documentation/devicetree/bindings/media/samsung-fimc.txt
@@ -95,7 +95,7 @@
This node should contain child 'port' nodes specifying active parallel video
input ports. It includes camera A and camera B inputs. 'reg' property in the
-port nodes specifies data input - 0, 1 indicates input A, B respectively.
+port nodes specifies data input - 1, 2 indicates input A, B respectively.
Optional properties
@@ -172,8 +172,8 @@
/* parallel camera ports */
parallel-ports {
/* camera A input */
- port@0 {
- reg = <0>;
+ port@1 {
+ reg = <1>;
fimc0_ep: endpoint {
remote-endpoint = <&s5k6aa_ep>;
bus-width = <8>;
diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
index 10b4596..e71d13c 100644
--- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
+++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
@@ -21,23 +21,26 @@
properties:
compatible:
- enum:
- - fsl,imx25-esdhc
- - fsl,imx35-esdhc
- - fsl,imx51-esdhc
- - fsl,imx53-esdhc
- - fsl,imx6q-usdhc
- - fsl,imx6sl-usdhc
- - fsl,imx6sx-usdhc
- - fsl,imx6ull-usdhc
- - fsl,imx7d-usdhc
- - fsl,imx7ulp-usdhc
- - fsl,imx8mq-usdhc
- - fsl,imx8mm-usdhc
- - fsl,imx8mn-usdhc
- - fsl,imx8mp-usdhc
- - fsl,imx8qm-usdhc
- - fsl,imx8qxp-usdhc
+ oneOf:
+ - enum:
+ - fsl,imx25-esdhc
+ - fsl,imx35-esdhc
+ - fsl,imx51-esdhc
+ - fsl,imx53-esdhc
+ - fsl,imx6q-usdhc
+ - fsl,imx6sl-usdhc
+ - fsl,imx6sx-usdhc
+ - fsl,imx6ull-usdhc
+ - fsl,imx7d-usdhc
+ - fsl,imx7ulp-usdhc
+ - items:
+ - enum:
+ - fsl,imx8mm-usdhc
+ - fsl,imx8mn-usdhc
+ - fsl,imx8mp-usdhc
+ - fsl,imx8mq-usdhc
+ - fsl,imx8qxp-usdhc
+ - const: fsl,imx7d-usdhc
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/mmc/microchip,dw-sparx5-sdhci.yaml b/Documentation/devicetree/bindings/mmc/microchip,dw-sparx5-sdhci.yaml
new file mode 100644
index 0000000..5588329
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/microchip,dw-sparx5-sdhci.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/microchip,dw-sparx5-sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Sparx5 Mobile Storage Host Controller Binding
+
+allOf:
+ - $ref: "mmc-controller.yaml"
+
+maintainers:
+ - Lars Povlsen <lars.povlsen@microchip.com>
+
+# Everything else is described in the common file
+properties:
+ compatible:
+ const: microchip,dw-sparx5-sdhci
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+ description:
+ Handle to "core" clock for the sdhci controller.
+
+ clock-names:
+ items:
+ - const: core
+
+ microchip,clock-delay:
+ description: Delay clock to card to meet setup time requirements.
+ Each step increase by 1.25ns.
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 1
+ maximum: 15
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/microchip,sparx5.h>
+ sdhci0: mmc@600800000 {
+ compatible = "microchip,dw-sparx5-sdhci";
+ reg = <0x00800000 0x1000>;
+ pinctrl-0 = <&emmc_pins>;
+ pinctrl-names = "default";
+ clocks = <&clks CLK_ID_AUX1>;
+ clock-names = "core";
+ assigned-clocks = <&clks CLK_ID_AUX1>;
+ assigned-clock-rates = <800000000>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ bus-width = <8>;
+ microchip,clock-delay = <10>;
+ };
diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
index b96da0c..f928f66 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
+++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
@@ -14,6 +14,10 @@
that requires the respective functionality should implement them using
these definitions.
+ It is possible to assign a fixed index mmcN to an MMC host controller
+ (and the corresponding mmcblkN devices) by defining an alias in the
+ /aliases device tree node.
+
properties:
$nodename:
pattern: "^mmc(@.*)?$"
diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml
index 449215444..8d625f9 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml
+++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml
@@ -20,6 +20,8 @@
reset-gpios:
minItems: 1
+ # Put some limit to avoid false warnings
+ maxItems: 32
description:
contains a list of GPIO specifiers. The reset GPIOs are asserted
at initialization and prior we start the power up procedure of the card.
diff --git a/Documentation/devicetree/bindings/mmc/owl-mmc.yaml b/Documentation/devicetree/bindings/mmc/owl-mmc.yaml
index 1380501..5eab25c 100644
--- a/Documentation/devicetree/bindings/mmc/owl-mmc.yaml
+++ b/Documentation/devicetree/bindings/mmc/owl-mmc.yaml
@@ -14,7 +14,11 @@
properties:
compatible:
- const: actions,owl-mmc
+ oneOf:
+ - const: actions,owl-mmc
+ - items:
+ - const: actions,s700-mmc
+ - const: actions,owl-mmc
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
index b4c3fd4..6bbf29b 100644
--- a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
+++ b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
@@ -50,6 +50,7 @@
- renesas,sdhi-r8a774a1 # RZ/G2M
- renesas,sdhi-r8a774b1 # RZ/G2N
- renesas,sdhi-r8a774c0 # RZ/G2E
+ - renesas,sdhi-r8a774e1 # RZ/G2H
- renesas,sdhi-r8a7795 # R-Car H3
- renesas,sdhi-r8a7796 # R-Car M3-W
- renesas,sdhi-r8a77961 # R-Car M3-W+
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-am654.txt b/Documentation/devicetree/bindings/mmc/sdhci-am654.txt
deleted file mode 100644
index 6d202f4..0000000
--- a/Documentation/devicetree/bindings/mmc/sdhci-am654.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-Device Tree Bindings for the SDHCI Controllers present on TI's AM654 SOCs
-
-The bindings follow the mmc[1], clock[2] and interrupt[3] bindings.
-Only deviations are documented here.
-
- [1] Documentation/devicetree/bindings/mmc/mmc.txt
- [2] Documentation/devicetree/bindings/clock/clock-bindings.txt
- [3] Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-
-Required Properties:
- - compatible: should be one of:
- "ti,am654-sdhci-5.1": SDHCI on AM654 device.
- "ti,j721e-sdhci-8bit": 8 bit SDHCI on J721E device.
- "ti,j721e-sdhci-4bit": 4 bit SDHCI on J721E device.
- - reg: Must be two entries.
- - The first should be the sdhci register space
- - The second should the subsystem/phy register space
- - clocks: Handles to the clock inputs.
- - clock-names: Tuple including "clk_xin" and "clk_ahb"
- - interrupts: Interrupt specifiers
- Output tap delay for each speed mode:
- - ti,otap-del-sel-legacy
- - ti,otap-del-sel-mmc-hs
- - ti,otap-del-sel-sd-hs
- - ti,otap-del-sel-sdr12
- - ti,otap-del-sel-sdr25
- - ti,otap-del-sel-sdr50
- - ti,otap-del-sel-sdr104
- - ti,otap-del-sel-ddr50
- - ti,otap-del-sel-ddr52
- - ti,otap-del-sel-hs200
- - ti,otap-del-sel-hs400
- These bindings must be provided otherwise the driver will disable the
- corresponding speed mode (i.e. all nodes must provide at least -legacy)
-
-Optional Properties (Required for ti,am654-sdhci-5.1 and ti,j721e-sdhci-8bit):
- - ti,trm-icp: DLL trim select
- - ti,driver-strength-ohm: driver strength in ohms.
- Valid values are 33, 40, 50, 66 and 100 ohms.
-Optional Properties:
- - ti,strobe-sel: strobe select delay for HS400 speed mode. Default value: 0x0.
- - ti,clkbuf-sel: Clock Delay Buffer Select
-
-Example:
-
- sdhci0: sdhci@4f80000 {
- compatible = "ti,am654-sdhci-5.1";
- reg = <0x0 0x4f80000 0x0 0x260>, <0x0 0x4f90000 0x0 0x134>;
- power-domains = <&k3_pds 47>;
- clocks = <&k3_clks 47 0>, <&k3_clks 47 1>;
- clock-names = "clk_ahb", "clk_xin";
- interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
- sdhci-caps-mask = <0x80000007 0x0>;
- mmc-ddr-1_8v;
- ti,otap-del-sel-legacy = <0x0>;
- ti,otap-del-sel-mmc-hs = <0x0>;
- ti,otap-del-sel-ddr52 = <0x5>;
- ti,otap-del-sel-hs200 = <0x5>;
- ti,otap-del-sel-hs400 = <0x0>;
- ti,trm-icp = <0x8>;
- };
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml b/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml
new file mode 100644
index 0000000..ac79f3a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml
@@ -0,0 +1,218 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/mmc/sdhci-am654.yaml#"
+$schema : "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: TI AM654 MMC Controller
+
+maintainers:
+ - Ulf Hansson <ulf.hansson@linaro.org>
+
+allOf:
+ - $ref: mmc-controller.yaml#
+
+properties:
+ compatible:
+ enum:
+ - ti,am654-sdhci-5.1
+ - ti,j721e-sdhci-8bit
+ - ti,j721e-sdhci-4bit
+ - ti,j7200-sdhci-8bit
+ - ti,j721e-sdhci-4bit
+
+ reg:
+ maxItems: 2
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+ description: Handles to input clocks
+
+ clock-names:
+ minItems: 1
+ maxItems: 2
+ items:
+ - const: clk_ahb
+ - const: clk_xin
+
+ # PHY output tap delays:
+ # Used to delay the data valid window and align it to the sampling clock.
+ # Binding needs to be provided for each supported speed mode otherwise the
+ # corresponding mode will be disabled.
+
+ ti,otap-del-sel-legacy:
+ description: Output tap delay for SD/MMC legacy timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0xf
+
+ ti,otap-del-sel-mmc-hs:
+ description: Output tap delay for MMC high speed timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0xf
+
+ ti,otap-del-sel-sd-hs:
+ description: Output tap delay for SD high speed timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0xf
+
+ ti,otap-del-sel-sdr12:
+ description: Output tap delay for SD UHS SDR12 timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0xf
+
+ ti,otap-del-sel-sdr25:
+ description: Output tap delay for SD UHS SDR25 timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0xf
+
+ ti,otap-del-sel-sdr50:
+ description: Output tap delay for SD UHS SDR50 timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0xf
+
+ ti,otap-del-sel-sdr104:
+ description: Output tap delay for SD UHS SDR104 timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0xf
+
+ ti,otap-del-sel-ddr50:
+ description: Output tap delay for SD UHS DDR50 timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0xf
+
+ ti,otap-del-sel-ddr52:
+ description: Output tap delay for eMMC DDR52 timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0xf
+
+ ti,otap-del-sel-hs200:
+ description: Output tap delay for eMMC HS200 timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0xf
+
+ ti,otap-del-sel-hs400:
+ description: Output tap delay for eMMC HS400 timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0xf
+
+ # PHY input tap delays:
+ # Used to delay the data valid window and align it to the sampling clock for
+ # modes that don't support tuning
+
+ ti,itap-del-sel-legacy:
+ description: Input tap delay for SD/MMC legacy timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0x1f
+
+ ti,itap-del-sel-mmc-hs:
+ description: Input tap delay for MMC high speed timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0x1f
+
+ ti,itap-del-sel-sd-hs:
+ description: Input tap delay for SD high speed timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0x1f
+
+ ti,itap-del-sel-sdr12:
+ description: Input tap delay for SD UHS SDR12 timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0x1f
+
+ ti,itap-del-sel-sdr25:
+ description: Input tap delay for SD UHS SDR25 timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0x1f
+
+ ti,itap-del-sel-ddr52:
+ description: Input tap delay for MMC DDR52 timing
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0x1f
+
+ ti,trm-icp:
+ description: DLL trim select
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 0xf
+
+ ti,driver-strength-ohm:
+ description: DLL drive strength in ohms
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ oneOf:
+ - enum:
+ - 33
+ - 40
+ - 50
+ - 66
+ - 100
+
+ ti,strobe-sel:
+ description: strobe select delay for HS400 speed mode.
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+
+ ti,clkbuf-sel:
+ description: Clock Delay Buffer Select
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - ti,otap-del-sel-legacy
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ mmc0: mmc@4f80000 {
+ compatible = "ti,am654-sdhci-5.1";
+ reg = <0x0 0x4f80000 0x0 0x260>, <0x0 0x4f90000 0x0 0x134>;
+ power-domains = <&k3_pds 47>;
+ clocks = <&k3_clks 47 0>, <&k3_clks 47 1>;
+ clock-names = "clk_ahb", "clk_xin";
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+ sdhci-caps-mask = <0x80000007 0x0>;
+ mmc-ddr-1_8v;
+ ti,otap-del-sel-legacy = <0x0>;
+ ti,otap-del-sel-mmc-hs = <0x0>;
+ ti,otap-del-sel-ddr52 = <0x5>;
+ ti,otap-del-sel-hs200 = <0x5>;
+ ti,otap-del-sel-hs400 = <0x0>;
+ ti,itap-del-sel-legacy = <0x10>;
+ ti,itap-del-sel-mmc-hs = <0xa>;
+ ti,itap-del-sel-ddr52 = <0x3>;
+ ti,trm-icp = <0x8>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/net/renesas,ravb.txt b/Documentation/devicetree/bindings/net/renesas,ravb.txt
index 032b76f..9119f1c 100644
--- a/Documentation/devicetree/bindings/net/renesas,ravb.txt
+++ b/Documentation/devicetree/bindings/net/renesas,ravb.txt
@@ -21,6 +21,7 @@
- "renesas,etheravb-r8a774a1" for the R8A774A1 SoC.
- "renesas,etheravb-r8a774b1" for the R8A774B1 SoC.
- "renesas,etheravb-r8a774c0" for the R8A774C0 SoC.
+ - "renesas,etheravb-r8a774e1" for the R8A774E1 SoC.
- "renesas,etheravb-r8a7795" for the R8A7795 SoC.
- "renesas,etheravb-r8a7796" for the R8A77960 SoC.
- "renesas,etheravb-r8a77961" for the R8A77961 SoC.
diff --git a/Documentation/devicetree/bindings/perf/arm,cmn.yaml b/Documentation/devicetree/bindings/perf/arm,cmn.yaml
new file mode 100644
index 0000000..e4fcc0d
--- /dev/null
+++ b/Documentation/devicetree/bindings/perf/arm,cmn.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2020 Arm Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/arm,cmn.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CMN (Coherent Mesh Network) Performance Monitors
+
+maintainers:
+ - Robin Murphy <robin.murphy@arm.com>
+
+properties:
+ compatible:
+ const: arm,cmn-600
+
+ reg:
+ items:
+ - description: Physical address of the base (PERIPHBASE) and
+ size (up to 64MB) of the configuration address space.
+
+ interrupts:
+ minItems: 1
+ maxItems: 4
+ items:
+ - description: Overflow interrupt for DTC0
+ - description: Overflow interrupt for DTC1
+ - description: Overflow interrupt for DTC2
+ - description: Overflow interrupt for DTC3
+ description: One interrupt for each DTC domain implemented must
+ be specified, in order. DTC0 is always present.
+
+ arm,root-node:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Offset from PERIPHBASE of the configuration
+ discovery node (see TRM definition of ROOTNODEBASE).
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - arm,root-node
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ pmu@50000000 {
+ compatible = "arm,cmn-600";
+ reg = <0x50000000 0x4000000>;
+ /* 4x2 mesh with one DTC, and CFG node at 0,1,1,0 */
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+ arm,root-node = <0x104000>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/rng/ingenic,trng.yaml b/Documentation/devicetree/bindings/rng/ingenic,trng.yaml
new file mode 100644
index 0000000..808f247
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/ingenic,trng.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/ingenic,trng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bindings for DTRNG in Ingenic SoCs
+
+maintainers:
+ - 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
+
+description:
+ The True Random Number Generator in Ingenic SoCs.
+
+properties:
+ compatible:
+ enum:
+ - ingenic,x1830-dtrng
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/x1830-cgu.h>
+
+ dtrng: trng@10072000 {
+ compatible = "ingenic,x1830-dtrng";
+ reg = <0x10072000 0xc>;
+
+ clocks = <&cgu X1830_CLK_DTRNG>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/rng/xiphera,xip8001b-trng.yaml b/Documentation/devicetree/bindings/rng/xiphera,xip8001b-trng.yaml
new file mode 100644
index 0000000..1e17e55
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/xiphera,xip8001b-trng.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/xiphera,xip8001b-trng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xiphera XIP8001B-trng bindings
+
+maintainers:
+ - Atte Tommiska <atte.tommiska@xiphera.com>
+
+description: |
+ Xiphera FPGA-based true random number generator intellectual property core.
+
+properties:
+ compatible:
+ const: xiphera,xip8001b-trng
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ rng@43c00000 {
+ compatible = "xiphera,xip8001b-trng";
+ reg = <0x43c00000 0x10000>;
+ };
diff --git a/Documentation/devicetree/bindings/timer/renesas,cmt.yaml b/Documentation/devicetree/bindings/timer/renesas,cmt.yaml
index 7e4dc56..428db3a 100644
--- a/Documentation/devicetree/bindings/timer/renesas,cmt.yaml
+++ b/Documentation/devicetree/bindings/timer/renesas,cmt.yaml
@@ -39,6 +39,7 @@
- items:
- enum:
- renesas,r8a73a4-cmt0 # 32-bit CMT0 on R-Mobile APE6
+ - renesas,r8a7742-cmt0 # 32-bit CMT0 on RZ/G1H
- renesas,r8a7743-cmt0 # 32-bit CMT0 on RZ/G1M
- renesas,r8a7744-cmt0 # 32-bit CMT0 on RZ/G1N
- renesas,r8a7745-cmt0 # 32-bit CMT0 on RZ/G1E
@@ -53,6 +54,7 @@
- items:
- enum:
- renesas,r8a73a4-cmt1 # 48-bit CMT1 on R-Mobile APE6
+ - renesas,r8a7742-cmt1 # 48-bit CMT1 on RZ/G1H
- renesas,r8a7743-cmt1 # 48-bit CMT1 on RZ/G1M
- renesas,r8a7744-cmt1 # 48-bit CMT1 on RZ/G1N
- renesas,r8a7745-cmt1 # 48-bit CMT1 on RZ/G1E
@@ -69,6 +71,7 @@
- renesas,r8a774a1-cmt0 # 32-bit CMT0 on RZ/G2M
- renesas,r8a774b1-cmt0 # 32-bit CMT0 on RZ/G2N
- renesas,r8a774c0-cmt0 # 32-bit CMT0 on RZ/G2E
+ - renesas,r8a774e1-cmt0 # 32-bit CMT0 on RZ/G2H
- renesas,r8a7795-cmt0 # 32-bit CMT0 on R-Car H3
- renesas,r8a7796-cmt0 # 32-bit CMT0 on R-Car M3-W
- renesas,r8a77965-cmt0 # 32-bit CMT0 on R-Car M3-N
@@ -83,6 +86,7 @@
- renesas,r8a774a1-cmt1 # 48-bit CMT on RZ/G2M
- renesas,r8a774b1-cmt1 # 48-bit CMT on RZ/G2N
- renesas,r8a774c0-cmt1 # 48-bit CMT on RZ/G2E
+ - renesas,r8a774e1-cmt1 # 48-bit CMT on RZ/G2H
- renesas,r8a7795-cmt1 # 48-bit CMT on R-Car H3
- renesas,r8a7796-cmt1 # 48-bit CMT on R-Car M3-W
- renesas,r8a77965-cmt1 # 48-bit CMT on R-Car M3-N
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index 4ace803..25c4239 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -326,6 +326,8 @@
- silabs,si7020
# Skyworks SKY81452: Six-Channel White LED Driver with Touch Panel Bias Supply
- skyworks,sky81452
+ # Socionext SynQuacer TPM MMIO module
+ - socionext,synquacer-tpm-mmio
# i2c serial eeprom (24cxx)
- st,24c256
# Ambient Light Sensor with SMBUS/Two Wire Serial Interface
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 63996ab..7d58834c 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -1174,6 +1174,8 @@
description: Shenzhen Xingbangda Display Technology Co., Ltd
"^xinpeng,.*":
description: Shenzhen Xinpeng Technology Co., Ltd
+ "^xiphera,.*":
+ description: Xiphera Ltd.
"^xlnx,.*":
description: Xilinx
"^xnano,.*":
diff --git a/Documentation/doc-guide/kernel-doc.rst b/Documentation/doc-guide/kernel-doc.rst
index fff6604..4fd86c2 100644
--- a/Documentation/doc-guide/kernel-doc.rst
+++ b/Documentation/doc-guide/kernel-doc.rst
@@ -387,22 +387,23 @@
Cross-referencing from reStructuredText
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-To cross-reference the functions and types defined in the kernel-doc comments
-from reStructuredText documents, please use the `Sphinx C Domain`_
-references. For example::
+No additional syntax is needed to cross-reference the functions and types
+defined in the kernel-doc comments from reStructuredText documents.
+Just end function names with ``()`` and write ``struct``, ``union``, ``enum``
+or ``typedef`` before types.
+For example::
- See function :c:func:`foo` and struct/union/enum/typedef :c:type:`bar`.
+ See foo().
+ See struct foo.
+ See union bar.
+ See enum baz.
+ See typedef meh.
-While the type reference works with just the type name, without the
-struct/union/enum/typedef part in front, you may want to use::
+However, if you want custom text in the cross-reference link, that can be done
+through the following syntax::
- See :c:type:`struct foo <foo>`.
- See :c:type:`union bar <bar>`.
- See :c:type:`enum baz <baz>`.
- See :c:type:`typedef meh <meh>`.
-
-This will produce prettier links, and is in line with how kernel-doc does the
-cross-references.
+ See :c:func:`my custom link text for function foo <foo>`.
+ See :c:type:`my custom link text for struct bar <bar>`.
For further details, please refer to the `Sphinx C Domain`_ documentation.
diff --git a/Documentation/doc-guide/sphinx.rst b/Documentation/doc-guide/sphinx.rst
index f71ddd5..896478b 100644
--- a/Documentation/doc-guide/sphinx.rst
+++ b/Documentation/doc-guide/sphinx.rst
@@ -337,6 +337,23 @@
- column 3
+Cross-referencing
+-----------------
+
+Cross-referencing from one documentation page to another can be done by passing
+the path to the file starting from the Documentation folder.
+For example, to cross-reference to this page (the .rst extension is optional)::
+
+ See Documentation/doc-guide/sphinx.rst.
+
+If you want to use a relative path, you need to use Sphinx's ``doc`` directive.
+For example, referencing this page from the same directory would be done as::
+
+ See :doc:`sphinx`.
+
+For information on cross-referencing to kernel-doc functions or types, see
+Documentation/doc-guide/kernel-doc.rst.
+
.. _sphinx_kfigure:
Figures & Images
diff --git a/Documentation/driver-api/dma-buf.rst b/Documentation/driver-api/dma-buf.rst
index 13ea0cc..4144b66 100644
--- a/Documentation/driver-api/dma-buf.rst
+++ b/Documentation/driver-api/dma-buf.rst
@@ -85,7 +85,7 @@
- Memory mapping the contents of the DMA buffer is also supported. See the
discussion below on `CPU Access to DMA Buffer Objects`_ for the full details.
-- The DMA buffer FD is also pollable, see `Fence Poll Support`_ below for
+- The DMA buffer FD is also pollable, see `Implicit Fence Poll Support`_ below for
details.
Basic Operation and Device DMA Access
diff --git a/Documentation/driver-api/gpio/driver.rst b/Documentation/driver-api/gpio/driver.rst
index 9809f59..072a745 100644
--- a/Documentation/driver-api/gpio/driver.rst
+++ b/Documentation/driver-api/gpio/driver.rst
@@ -342,12 +342,12 @@
forced to a thread. The "fake?" raw lock can be used to work around this
problem::
- raw_spinlock_t wa_lock;
- static irqreturn_t omap_gpio_irq_handler(int irq, void *gpiobank)
- unsigned long wa_lock_flags;
- raw_spin_lock_irqsave(&bank->wa_lock, wa_lock_flags);
- generic_handle_irq(irq_find_mapping(bank->chip.irq.domain, bit));
- raw_spin_unlock_irqrestore(&bank->wa_lock, wa_lock_flags);
+ raw_spinlock_t wa_lock;
+ static irqreturn_t omap_gpio_irq_handler(int irq, void *gpiobank)
+ unsigned long wa_lock_flags;
+ raw_spin_lock_irqsave(&bank->wa_lock, wa_lock_flags);
+ generic_handle_irq(irq_find_mapping(bank->chip.irq.domain, bit));
+ raw_spin_unlock_irqrestore(&bank->wa_lock, wa_lock_flags);
- GENERIC CHAINED GPIO IRQCHIPS: these are the same as "CHAINED GPIO irqchips",
but chained IRQ handlers are not used. Instead GPIO IRQs dispatching is
diff --git a/Documentation/driver-api/media/camera-sensor.rst b/Documentation/driver-api/media/camera-sensor.rst
new file mode 100644
index 0000000..4d1ae12
--- /dev/null
+++ b/Documentation/driver-api/media/camera-sensor.rst
@@ -0,0 +1,134 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Writing camera sensor drivers
+=============================
+
+CSI-2
+-----
+
+Please see what is written on :ref:`MIPI_CSI_2`.
+
+Handling clocks
+---------------
+
+Camera sensors have an internal clock tree including a PLL and a number of
+divisors. The clock tree is generally configured by the driver based on a few
+input parameters that are specific to the hardware:: the external clock frequency
+and the link frequency. The two parameters generally are obtained from system
+firmware. No other frequencies should be used in any circumstances.
+
+The reason why the clock frequencies are so important is that the clock signals
+come out of the SoC, and in many cases a specific frequency is designed to be
+used in the system. Using another frequency may cause harmful effects
+elsewhere. Therefore only the pre-determined frequencies are configurable by the
+user.
+
+Frame size
+----------
+
+There are two distinct ways to configure the frame size produced by camera
+sensors.
+
+Freely configurable camera sensor drivers
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Freely configurable camera sensor drivers expose the device's internal
+processing pipeline as one or more sub-devices with different cropping and
+scaling configurations. The output size of the device is the result of a series
+of cropping and scaling operations from the device's pixel array's size.
+
+An example of such a driver is the smiapp driver (see drivers/media/i2c/smiapp).
+
+Register list based drivers
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Register list based drivers generally, instead of able to configure the device
+they control based on user requests, are limited to a number of preset
+configurations that combine a number of different parameters that on hardware
+level are independent. How a driver picks such configuration is based on the
+format set on a source pad at the end of the device's internal pipeline.
+
+Most sensor drivers are implemented this way, see e.g.
+drivers/media/i2c/imx319.c for an example.
+
+Frame interval configuration
+----------------------------
+
+There are two different methods for obtaining possibilities for different frame
+intervals as well as configuring the frame interval. Which one to implement
+depends on the type of the device.
+
+Raw camera sensors
+~~~~~~~~~~~~~~~~~~
+
+Instead of a high level parameter such as frame interval, the frame interval is
+a result of the configuration of a number of camera sensor implementation
+specific parameters. Luckily, these parameters tend to be the same for more or
+less all modern raw camera sensors.
+
+The frame interval is calculated using the following equation::
+
+ frame interval = (analogue crop width + horizontal blanking) *
+ (analogue crop height + vertical blanking) / pixel rate
+
+The formula is bus independent and is applicable for raw timing parameters on
+large variety of devices beyond camera sensors. Devices that have no analogue
+crop, use the full source image size, i.e. pixel array size.
+
+Horizontal and vertical blanking are specified by ``V4L2_CID_HBLANK`` and
+``V4L2_CID_VBLANK``, respectively. The unit of these controls are lines. The
+pixel rate is specified by ``V4L2_CID_PIXEL_RATE`` in the same sub-device. The
+unit of that control is Hz.
+
+Register list based drivers need to implement read-only sub-device nodes for the
+purpose. Devices that are not register list based need these to configure the
+device's internal processing pipeline.
+
+The first entity in the linear pipeline is the pixel array. The pixel array may
+be followed by other entities that are there to allow configuring binning,
+skipping, scaling or digital crop :ref:`v4l2-subdev-selections`.
+
+USB cameras etc. devices
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+USB video class hardware, as well as many cameras offering a similar higher
+level interface natively, generally use the concept of frame interval (or frame
+rate) on device level in firmware or hardware. This means lower level controls
+implemented by raw cameras may not be used on uAPI (or even kAPI) to control the
+frame interval on these devices.
+
+Power management
+----------------
+
+Always use runtime PM to manage the power states of your device. Camera sensor
+drivers are in no way special in this respect: they are responsible for
+controlling the power state of the device they otherwise control as well. In
+general, the device must be powered on at least when its registers are being
+accessed and when it is streaming.
+
+Existing camera sensor drivers may rely on the old
+:c:type:`v4l2_subdev_core_ops`->s_power() callback for bridge or ISP drivers to
+manage their power state. This is however **deprecated**. If you feel you need
+to begin calling an s_power from an ISP or a bridge driver, instead please add
+runtime PM support to the sensor driver you are using. Likewise, new drivers
+should not use s_power.
+
+Please see examples in e.g. ``drivers/media/i2c/ov8856.c`` and
+``drivers/media/i2c/smiapp/smiapp-core.c``. The two drivers work in both ACPI
+and DT based systems.
+
+Control framework
+~~~~~~~~~~~~~~~~~
+
+``v4l2_ctrl_handler_setup()`` function may not be used in the device's runtime
+PM ``runtime_resume`` callback, as it has no way to figure out the power state
+of the device. This is because the power state of the device is only changed
+after the power state transition has taken place. The ``s_ctrl`` callback can be
+used to obtain device's power state after the power state transition:
+
+.. c:function::
+ int pm_runtime_get_if_in_use(struct device *dev);
+
+The function returns a non-zero value if it succeeded getting the power count or
+runtime PM was disabled, in either of which cases the driver may proceed to
+access the device.
diff --git a/Documentation/driver-api/media/cec-core.rst b/Documentation/driver-api/media/cec-core.rst
index 3ce26b7..03016ee 100644
--- a/Documentation/driver-api/media/cec-core.rst
+++ b/Documentation/driver-api/media/cec-core.rst
@@ -36,8 +36,9 @@
calling cec_allocate_adapter() and deleted by calling cec_delete_adapter():
.. c:function::
- struct cec_adapter *cec_allocate_adapter(const struct cec_adap_ops *ops, void *priv,
- const char *name, u32 caps, u8 available_las);
+ struct cec_adapter *cec_allocate_adapter(const struct cec_adap_ops *ops, \
+ void *priv, const char *name, \
+ u32 caps, u8 available_las);
.. c:function::
void cec_delete_adapter(struct cec_adapter *adap);
@@ -74,7 +75,8 @@
CEC_CAP_RC is set) you call:
.. c:function::
- int cec_register_adapter(struct cec_adapter *adap, struct device *parent);
+ int cec_register_adapter(struct cec_adapter *adap, \
+ struct device *parent);
where parent is the parent device.
@@ -123,9 +125,8 @@
hardware:
-To enable/disable the hardware:
+To enable/disable the hardware::
-.. c:function::
int (*adap_enable)(struct cec_adapter *adap, bool enable);
This callback enables or disables the CEC hardware. Enabling the CEC hardware
@@ -137,9 +138,8 @@
Note that adap_enable must return 0 if enable is false.
-To enable/disable the 'monitor all' mode:
+To enable/disable the 'monitor all' mode::
-.. c:function::
int (*adap_monitor_all_enable)(struct cec_adapter *adap, bool enable);
If enabled, then the adapter should be put in a mode to also monitor messages
@@ -150,9 +150,8 @@
Note that adap_monitor_all_enable must return 0 if enable is false.
-To enable/disable the 'monitor pin' mode:
+To enable/disable the 'monitor pin' mode::
-.. c:function::
int (*adap_monitor_pin_enable)(struct cec_adapter *adap, bool enable);
If enabled, then the adapter should be put in a mode to also monitor CEC pin
@@ -163,9 +162,8 @@
Note that adap_monitor_pin_enable must return 0 if enable is false.
-To program a new logical address:
+To program a new logical address::
-.. c:function::
int (*adap_log_addr)(struct cec_adapter *adap, u8 logical_addr);
If logical_addr == CEC_LOG_ADDR_INVALID then all programmed logical addresses
@@ -177,9 +175,8 @@
Note that adap_log_addr must return 0 if logical_addr is CEC_LOG_ADDR_INVALID.
-To transmit a new message:
+To transmit a new message::
-.. c:function::
int (*adap_transmit)(struct cec_adapter *adap, u8 attempts,
u32 signal_free_time, struct cec_msg *msg);
@@ -196,17 +193,15 @@
microseconds (one data bit period is 2.4 ms).
-To log the current CEC hardware status:
+To log the current CEC hardware status::
-.. c:function::
void (*adap_status)(struct cec_adapter *adap, struct seq_file *file);
This optional callback can be used to show the status of the CEC hardware.
The status is available through debugfs: cat /sys/kernel/debug/cec/cecX/status
-To free any resources when the adapter is deleted:
+To free any resources when the adapter is deleted::
-.. c:function::
void (*adap_free)(struct cec_adapter *adap);
This optional callback can be used to free any resources that might have been
@@ -216,15 +211,14 @@
Your adapter driver will also have to react to events (typically interrupt
driven) by calling into the framework in the following situations:
-When a transmit finished (successfully or otherwise):
+When a transmit finished (successfully or otherwise)::
-.. c:function::
- void cec_transmit_done(struct cec_adapter *adap, u8 status, u8 arb_lost_cnt,
- u8 nack_cnt, u8 low_drive_cnt, u8 error_cnt);
+ void cec_transmit_done(struct cec_adapter *adap, u8 status,
+ u8 arb_lost_cnt, u8 nack_cnt, u8 low_drive_cnt,
+ u8 error_cnt);
-or:
+or::
-.. c:function::
void cec_transmit_attempt_done(struct cec_adapter *adap, u8 status);
The status can be one of:
@@ -341,17 +335,15 @@
$ cat einj.txt >error-inj
The first callback is called when this file is read and it should show the
-the current error injection state:
+the current error injection state::
-.. c:function::
int (*error_inj_show)(struct cec_adapter *adap, struct seq_file *sf);
It is recommended that it starts with a comment block with basic usage
information. It returns 0 for success and an error otherwise.
-The second callback will parse commands written to the ``error-inj`` file:
+The second callback will parse commands written to the ``error-inj`` file::
-.. c:function::
bool (*error_inj_parse_line)(struct cec_adapter *adap, char *line);
The ``line`` argument points to the start of the command. Any leading
@@ -382,9 +374,8 @@
};
The received() callback allows the driver to optionally handle a newly
-received CEC message
+received CEC message::
-.. c:function::
int (*received)(struct cec_adapter *adap, struct cec_msg *msg);
If the driver wants to process a CEC message, then it can implement this
@@ -399,15 +390,14 @@
CEC Adapter drivers can call the following CEC framework functions:
.. c:function::
- int cec_transmit_msg(struct cec_adapter *adap, struct cec_msg *msg,
- bool block);
+ int cec_transmit_msg(struct cec_adapter *adap, struct cec_msg *msg, \
+ bool block);
Transmit a CEC message. If block is true, then wait until the message has been
transmitted, otherwise just queue it and return.
.. c:function::
- void cec_s_phys_addr(struct cec_adapter *adap, u16 phys_addr,
- bool block);
+ void cec_s_phys_addr(struct cec_adapter *adap, u16 phys_addr, bool block);
Change the physical address. This function will set adap->phys_addr and
send an event if it has changed. If cec_s_log_addrs() has been called and
@@ -422,15 +412,15 @@
address to CEC_PHYS_ADDR_INVALID before enabling the new physical address.
.. c:function::
- void cec_s_phys_addr_from_edid(struct cec_adapter *adap,
- const struct edid *edid);
+ void cec_s_phys_addr_from_edid(struct cec_adapter *adap, \
+ const struct edid *edid);
A helper function that extracts the physical address from the edid struct
and calls cec_s_phys_addr() with that address, or CEC_PHYS_ADDR_INVALID
if the EDID did not contain a physical address or edid was a NULL pointer.
.. c:function::
- int cec_s_log_addrs(struct cec_adapter *adap,
+ int cec_s_log_addrs(struct cec_adapter *adap, \
struct cec_log_addrs *log_addrs, bool block);
Claim the CEC logical addresses. Should never be called if CEC_CAP_LOG_ADDRS
diff --git a/Documentation/driver-api/media/csi2.rst b/Documentation/driver-api/media/csi2.rst
index 17cad43..e1b8380 100644
--- a/Documentation/driver-api/media/csi2.rst
+++ b/Documentation/driver-api/media/csi2.rst
@@ -1,5 +1,7 @@
.. SPDX-License-Identifier: GPL-2.0
+.. _MIPI_CSI_2:
+
MIPI CSI-2
==========
diff --git a/Documentation/driver-api/media/drivers/index.rst b/Documentation/driver-api/media/drivers/index.rst
index 0df85fc..eb70117 100644
--- a/Documentation/driver-api/media/drivers/index.rst
+++ b/Documentation/driver-api/media/drivers/index.rst
@@ -25,6 +25,7 @@
sh_mobile_ceu_camera
tuners
vimc-devel
+ zoran
Digital TV drivers
@@ -35,4 +36,5 @@
dvb-usb
frontends
+ vidtv
contributors
diff --git a/Documentation/driver-api/media/drivers/vidtv.rst b/Documentation/driver-api/media/drivers/vidtv.rst
new file mode 100644
index 0000000..6511544
--- /dev/null
+++ b/Documentation/driver-api/media/drivers/vidtv.rst
@@ -0,0 +1,425 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+================================
+vidtv: Virtual Digital TV driver
+================================
+
+Author: Daniel W. S. Almeida <dwlsalmeida@gmail.com>, June 2020.
+
+Background
+----------
+
+Vidtv is a virtual DVB driver that aims to serve as a reference for driver
+writers by serving as a template. It also validates the existing media DVB
+APIs, thus helping userspace application writers.
+
+Currently, it consists of:
+
+- A fake tuner driver, which will report a bad signal quality if the chosen
+ frequency is too far away from a table of valid frequencies for a
+ particular delivery system.
+
+- A fake demod driver, which will constantly poll the fake signal quality
+ returned by the tuner, simulating a device that can lose/reacquire a lock
+ on the signal depending on the CNR levels.
+
+- A fake bridge driver, which is the module responsible for modprobing the
+ fake tuner and demod modules and implementing the demux logic. This module
+ takes parameters at initialization that will dictate how the simulation
+ behaves.
+
+- Code reponsible for encoding a valid MPEG Transport Stream, which is then
+ passed to the bridge driver. This fake stream contains some hardcoded content.
+ For now, we have a single, audio-only channel containing a single MPEG
+ Elementary Stream, which in turn contains a SMPTE 302m encoded sine-wave.
+ Note that this particular encoder was chosen because it is the easiest
+ way to encode PCM audio data in a MPEG Transport Stream.
+
+Building vidtv
+--------------
+vidtv is a test driver and thus is **not** enabled by default when
+compiling the kernel.
+
+In order to enable compilation of vidtv:
+
+- Enable **DVB_TEST_DRIVERS**, then
+- Enable **DVB_VIDTV**
+
+When compiled as a module, expect the following .ko files:
+
+- dvb_vidtv_tuner.ko
+
+- dvb_vidtv_demod.ko
+
+- dvb_vidtv_bridge.ko
+
+Running vidtv
+-------------
+When compiled as a module, run::
+
+ modprobe vidtv
+
+That's it! The bridge driver will initialize the tuner and demod drivers as
+part of its own initialization.
+
+By default, it will accept the following frequencies:
+
+ - 474 MHz for DVB-T/T2/C;
+ - 11,362 GHz for DVB-S/S2.
+
+For satellite systems, the driver simulates an universal extended
+LNBf, with frequencies at Ku-Band, ranging from 10.7 GHz to 12.75 GHz.
+
+You can optionally define some command-line arguments to vidtv.
+
+Command-line arguments to vidtv
+-------------------------------
+Below is a list of all arguments that can be supplied to vidtv:
+
+drop_tslock_prob_on_low_snr
+ Probability of losing the TS lock if the signal quality is bad.
+ This probability be used by the fake demodulator driver to
+ eventually return a status of 0 when the signal quality is not
+ good.
+
+recover_tslock_prob_on_good_snr:
+ Probability recovering the TS lock when the signal improves. This
+ probability be used by the fake demodulator driver to eventually
+ return a status of 0x1f when/if the signal quality improves.
+
+mock_power_up_delay_msec
+ Simulate a power up delay. Default: 0.
+
+mock_tune_delay_msec
+ Simulate a tune delay. Default 0.
+
+vidtv_valid_dvb_t_freqs
+ Valid DVB-T frequencies to simulate, in Hz.
+
+vidtv_valid_dvb_c_freqs
+ Valid DVB-C frequencies to simulate, in Hz.
+
+vidtv_valid_dvb_s_freqs
+ Valid DVB-S/S2 frequencies to simulate at Ku-Band, in kHz.
+
+max_frequency_shift_hz,
+ Maximum shift in HZ allowed when tuning in a channel.
+
+si_period_msec
+ How often to send SI packets. Default: 40ms.
+
+pcr_period_msec
+ How often to send PCR packets. Default: 40ms.
+
+mux_rate_kbytes_sec
+ Attempt to maintain this bit rate by inserting TS null packets, if
+ necessary. Default: 4096.
+
+pcr_pid,
+ PCR PID for all channels. Default: 0x200.
+
+mux_buf_sz_pkts,
+ Size for the mux buffer in multiples of 188 bytes.
+
+vidtv internal structure
+------------------------
+The kernel modules are split in the following way:
+
+vidtv_tuner.[ch]
+ Implements a fake tuner DVB driver.
+
+vidtv_demod.[ch]
+ Implements a fake demodulator DVB driver.
+
+vidtv_bridge.[ch]
+ Implements a bridge driver.
+
+The MPEG related code is split in the following way:
+
+vidtv_ts.[ch]
+ Code to work with MPEG TS packets, such as TS headers, adaptation
+ fields, PCR packets and NULL packets.
+
+vidtv_psi.[ch]
+ This is the PSI generator. PSI packets contain general information
+ about a MPEG Transport Stream. A PSI generator is needed so
+ userspace apps can retrieve information about the Transport Stream
+ and eventually tune into a (dummy) channel.
+
+ Because the generator is implemented in a separate file, it can be
+ reused elsewhere in the media subsystem.
+
+ Currently vidtv supports working with 3 PSI tables: PAT, PMT and
+ SDT.
+
+ The specification for PAT and PMT can be found in *ISO 13818-1:
+ Systems*, while the specification for the SDT can be found in *ETSI
+ EN 300 468: Specification for Service Information (SI) in DVB
+ systems*.
+
+ It isn't strictly necessary, but using a real TS file helps when
+ debugging PSI tables. Vidtv currently tries to replicate the PSI
+ structure found in this file: `TS1Globo.ts
+ <https://tsduck.io/streams/brazil-isdb-tb/TS1globo.ts>`_.
+
+ A good way to visualize the structure of streams is by using
+ `DVBInspector <https://sourceforge.net/projects/dvbinspector/>`_.
+
+vidtv_pes.[ch]
+ Implements the PES logic to convert encoder data into MPEG TS
+ packets. These can then be fed into a TS multiplexer and eventually
+ into userspace.
+
+vidtv_encoder.h
+ An interface for vidtv encoders. New encoders can be added to this
+ driver by implementing the calls in this file.
+
+vidtv_s302m.[ch]
+ Implements a S302M encoder to make it possible to insert PCM audio
+ data in the generated MPEG Transport Stream. The relevant
+ specification is available online as *SMPTE 302M-2007: Television -
+ Mapping of AES3 Data into MPEG-2 Transport Stream*.
+
+
+ The resulting MPEG Elementary Stream is conveyed in a private
+ stream with a S302M registration descriptor attached.
+
+ This shall enable passing an audio signal into userspace so it can
+ be decoded and played by media software. The corresponding decoder
+ in ffmpeg is located in 'libavcodec/s302m.c' and is experimental.
+
+vidtv_channel.[ch]
+ Implements a 'channel' abstraction.
+
+ When vidtv boots, it will create some hardcoded channels:
+
+ #. Their services will be concatenated to populate the SDT.
+
+ #. Their programs will be concatenated to populate the PAT
+
+ #. For each program in the PAT, a PMT section will be created
+
+ #. The PMT section for a channel will be assigned its streams.
+
+ #. Every stream will have its corresponding encoder polled in a
+ loop to produce TS packets.
+ These packets may be interleaved by the muxer and then delivered
+ to the bridge.
+
+vidtv_mux.[ch]
+ Implements a MPEG TS mux, loosely based on the ffmpeg
+ implementation in "libavcodec/mpegtsenc.c"
+
+ The muxer runs a loop which is responsible for:
+
+ #. Keeping track of the amount of time elapsed since the last
+ iteration.
+
+ #. Polling encoders in order to fetch 'elapsed_time' worth of data.
+
+ #. Inserting PSI and/or PCR packets, if needed.
+
+ #. Padding the resulting stream with NULL packets if
+ necessary in order to maintain the chosen bit rate.
+
+ #. Delivering the resulting TS packets to the bridge
+ driver so it can pass them to the demux.
+
+Testing vidtv with v4l-utils
+----------------------------
+
+Using the tools in v4l-utils is a great way to test and inspect the output of
+vidtv. It is hosted here: `v4l-utils Documentation
+<https://linuxtv.org/wiki/index.php/V4l-utils>`_.
+
+From its webpage::
+
+ The v4l-utils are a series of packages for handling media devices.
+
+ It is hosted at http://git.linuxtv.org/v4l-utils.git, and packaged
+ on most distributions.
+
+ It provides a series of libraries and utilities to be used to
+ control several aspect of the media boards.
+
+
+Start by installing v4l-utils and then modprobing vidtv::
+
+ modprobe dvb_vidtv_bridge
+
+If the driver is OK, it should load and its probing code will run. This will
+pull in the tuner and demod drivers.
+
+Using dvb-fe-tool
+~~~~~~~~~~~~~~~~~
+
+The first step to check whether the demod loaded successfully is to run::
+
+ $ dvb-fe-tool
+
+This should return what is currently set up at the demod struct, i.e.::
+
+ static const struct dvb_frontend_ops vidtv_demod_ops = {
+ .delsys = {
+ SYS_DVBT,
+ SYS_DVBT2,
+ SYS_DVBC_ANNEX_A,
+ SYS_DVBS,
+ SYS_DVBS2,
+ },
+
+ .info = {
+ .name = "Dummy demod for DVB-T/T2/C/S/S2",
+ .frequency_min_hz = 51 * MHz,
+ .frequency_max_hz = 2150 * MHz,
+ .frequency_stepsize_hz = 62500,
+ .frequency_tolerance_hz = 29500 * kHz,
+ .symbol_rate_min = 1000000,
+ .symbol_rate_max = 45000000,
+
+ .caps = FE_CAN_FEC_1_2 |
+ FE_CAN_FEC_2_3 |
+ FE_CAN_FEC_3_4 |
+ FE_CAN_FEC_4_5 |
+ FE_CAN_FEC_5_6 |
+ FE_CAN_FEC_6_7 |
+ FE_CAN_FEC_7_8 |
+ FE_CAN_FEC_8_9 |
+ FE_CAN_QAM_16 |
+ FE_CAN_QAM_64 |
+ FE_CAN_QAM_32 |
+ FE_CAN_QAM_128 |
+ FE_CAN_QAM_256 |
+ FE_CAN_QAM_AUTO |
+ FE_CAN_QPSK |
+ FE_CAN_FEC_AUTO |
+ FE_CAN_INVERSION_AUTO |
+ FE_CAN_TRANSMISSION_MODE_AUTO |
+ FE_CAN_GUARD_INTERVAL_AUTO |
+ FE_CAN_HIERARCHY_AUTO,
+ }
+
+ ....
+
+For more information on dvb-fe-tools check its online documentation here:
+`dvb-fe-tool Documentation
+<https://www.linuxtv.org/wiki/index.php/Dvb-fe-tool>`_.
+
+Using dvb-scan
+~~~~~~~~~~~~~~
+
+In order to tune into a channel and read the PSI tables, we can use dvb-scan.
+
+For this, one should provide a configuration file known as a 'scan file',
+here's an example::
+
+ [Channel]
+ FREQUENCY = 330000000
+ MODULATION = QAM/AUTO
+ SYMBOL_RATE = 6940000
+ INNER_FEC = AUTO
+ DELIVERY_SYSTEM = DVBC/ANNEX_A
+
+.. note::
+ The parameters depend on the video standard you're testing.
+
+.. note::
+ Vidtv is a fake driver and does not validate much of the information
+ in the scan file. Just specifying 'FREQUENCY' and 'DELIVERY_SYSTEM'
+ should be enough for DVB-T/DVB-T2. For DVB-S/DVB-C however, you
+ should also provide 'SYMBOL_RATE'.
+
+You can browse scan tables online here: `dvb-scan-tables
+<https://git.linuxtv.org/dtv-scan-tables.git>`_.
+
+Assuming this channel is named 'channel.conf', you can then run::
+
+ $ dvbv5-scan channel.conf
+
+For more information on dvb-scan, check its documentation online here:
+`dvb-scan Documentation <https://www.linuxtv.org/wiki/index.php/Dvbscan>`_.
+
+Using dvb-zap
+~~~~~~~~~~~~~
+
+dvbv5-zap is a command line tool that can be used to record MPEG-TS to disk. The
+typical use is to tune into a channel and put it into record mode. The example
+below - which is taken from the documentation - illustrates that::
+
+ $ dvbv5-zap -c dvb_channel.conf "trilhas sonoras" -r
+ using demux '/dev/dvb/adapter0/demux0'
+ reading channels from file 'dvb_channel.conf'
+ service has pid type 05: 204
+ tuning to 573000000 Hz
+ audio pid 104
+ dvb_set_pesfilter 104
+ Lock (0x1f) Quality= Good Signal= 100.00% C/N= -13.80dB UCB= 70 postBER= 3.14x10^-3 PER= 0
+ DVR interface '/dev/dvb/adapter0/dvr0' can now be opened
+
+The channel can be watched by playing the contents of the DVR interface, with
+some player that recognizes the MPEG-TS format, such as *mplayer* or *vlc*.
+
+By playing the contents of the stream one can visually inspect the workings of
+vidtv, e.g.::
+
+ $ mplayer /dev/dvb/adapter0/dvr0
+
+For more information on dvb-zap check its online documentation here:
+`dvb-zap Documentation
+<https://www.linuxtv.org/wiki/index.php/Dvbv5-zap>`_.
+See also: `zap <https://www.linuxtv.org/wiki/index.php/Zap>`_.
+
+
+What can still be improved in vidtv
+-----------------------------------
+
+Add *debugfs* integration
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Although frontend drivers provide DVBv5 statistics via the .read_status
+call, a nice addition would be to make additional statistics available to
+userspace via debugfs, which is a simple-to-use, RAM-based filesystem
+specifically designed for debug purposes.
+
+The logic for this would be implemented on a separate file so as not to
+pollute the frontend driver. These statistics are driver-specific and can
+be useful during tests.
+
+The Siano driver is one example of a driver using
+debugfs to convey driver-specific statistics to userspace and it can be
+used as a reference.
+
+This should be further enabled and disabled via a Kconfig
+option for convenience.
+
+Add a way to test video
+~~~~~~~~~~~~~~~~~~~~~~~
+
+Currently, vidtv can only encode PCM audio. It would be great to implement
+a barebones version of MPEG-2 video encoding so we can also test video. The
+first place to look into is *ISO 13818-2: Information technology — Generic
+coding of moving pictures and associated audio information — Part 2: Video*,
+which covers the encoding of compressed video in MPEG Transport Streams.
+
+This might optionally use the Video4Linux2 Test Pattern Generator, v4l2-tpg,
+which resides at::
+
+ drivers/media/common/v4l2-tpg/
+
+
+Add white noise simulation
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The vidtv tuner already has code to identify whether the chosen frequency
+is too far away from a table of valid frequencies. For now, this means that
+the demodulator can eventually lose the lock on the signal, since the tuner will
+report a bad signal quality.
+
+A nice addition is to simulate some noise when the signal quality is bad by:
+
+- Randomly dropping some TS packets. This will trigger a continuity error if the
+ continuity counter is updated but the packet is not passed on to the demux.
+
+- Updating the error statistics accordingly (e.g. BER, etc).
+
+- Simulating some noise in the encoded data.
diff --git a/Documentation/driver-api/media/drivers/zoran.rst b/Documentation/driver-api/media/drivers/zoran.rst
new file mode 100644
index 0000000..83cbae9
--- /dev/null
+++ b/Documentation/driver-api/media/drivers/zoran.rst
@@ -0,0 +1,575 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+The Zoran driver
+================
+
+unified zoran driver (zr360x7, zoran, buz, dc10(+), dc30(+), lml33)
+
+website: http://mjpeg.sourceforge.net/driver-zoran/
+
+
+Frequently Asked Questions
+--------------------------
+
+What cards are supported
+------------------------
+
+Iomega Buz, Linux Media Labs LML33/LML33R10, Pinnacle/Miro
+DC10/DC10+/DC30/DC30+ and related boards (available under various names).
+
+Iomega Buz
+~~~~~~~~~~
+
+* Zoran zr36067 PCI controller
+* Zoran zr36060 MJPEG codec
+* Philips saa7111 TV decoder
+* Philips saa7185 TV encoder
+
+Drivers to use: videodev, i2c-core, i2c-algo-bit,
+videocodec, saa7111, saa7185, zr36060, zr36067
+
+Inputs/outputs: Composite and S-video
+
+Norms: PAL, SECAM (720x576 @ 25 fps), NTSC (720x480 @ 29.97 fps)
+
+Card number: 7
+
+AverMedia 6 Eyes AVS6EYES
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+* Zoran zr36067 PCI controller
+* Zoran zr36060 MJPEG codec
+* Samsung ks0127 TV decoder
+* Conexant bt866 TV encoder
+
+Drivers to use: videodev, i2c-core, i2c-algo-bit,
+videocodec, ks0127, bt866, zr36060, zr36067
+
+Inputs/outputs:
+ Six physical inputs. 1-6 are composite,
+ 1-2, 3-4, 5-6 doubles as S-video,
+ 1-3 triples as component.
+ One composite output.
+
+Norms: PAL, SECAM (720x576 @ 25 fps), NTSC (720x480 @ 29.97 fps)
+
+Card number: 8
+
+.. note::
+
+ Not autodetected, card=8 is necessary.
+
+Linux Media Labs LML33
+~~~~~~~~~~~~~~~~~~~~~~
+
+* Zoran zr36067 PCI controller
+* Zoran zr36060 MJPEG codec
+* Brooktree bt819 TV decoder
+* Brooktree bt856 TV encoder
+
+Drivers to use: videodev, i2c-core, i2c-algo-bit,
+videocodec, bt819, bt856, zr36060, zr36067
+
+Inputs/outputs: Composite and S-video
+
+Norms: PAL (720x576 @ 25 fps), NTSC (720x480 @ 29.97 fps)
+
+Card number: 5
+
+Linux Media Labs LML33R10
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+* Zoran zr36067 PCI controller
+* Zoran zr36060 MJPEG codec
+* Philips saa7114 TV decoder
+* Analog Devices adv7170 TV encoder
+
+Drivers to use: videodev, i2c-core, i2c-algo-bit,
+videocodec, saa7114, adv7170, zr36060, zr36067
+
+Inputs/outputs: Composite and S-video
+
+Norms: PAL (720x576 @ 25 fps), NTSC (720x480 @ 29.97 fps)
+
+Card number: 6
+
+Pinnacle/Miro DC10(new)
+~~~~~~~~~~~~~~~~~~~~~~~
+
+* Zoran zr36057 PCI controller
+* Zoran zr36060 MJPEG codec
+* Philips saa7110a TV decoder
+* Analog Devices adv7176 TV encoder
+
+Drivers to use: videodev, i2c-core, i2c-algo-bit,
+videocodec, saa7110, adv7175, zr36060, zr36067
+
+Inputs/outputs: Composite, S-video and Internal
+
+Norms: PAL, SECAM (768x576 @ 25 fps), NTSC (640x480 @ 29.97 fps)
+
+Card number: 1
+
+Pinnacle/Miro DC10+
+~~~~~~~~~~~~~~~~~~~
+
+* Zoran zr36067 PCI controller
+* Zoran zr36060 MJPEG codec
+* Philips saa7110a TV decoder
+* Analog Devices adv7176 TV encoder
+
+Drivers to use: videodev, i2c-core, i2c-algo-bit,
+videocodec, saa7110, adv7175, zr36060, zr36067
+
+Inputs/outputs: Composite, S-video and Internal
+
+Norms: PAL, SECAM (768x576 @ 25 fps), NTSC (640x480 @ 29.97 fps)
+
+Card number: 2
+
+Pinnacle/Miro DC10(old)
+~~~~~~~~~~~~~~~~~~~~~~~
+
+* Zoran zr36057 PCI controller
+* Zoran zr36050 MJPEG codec
+* Zoran zr36016 Video Front End or Fuji md0211 Video Front End (clone?)
+* Micronas vpx3220a TV decoder
+* mse3000 TV encoder or Analog Devices adv7176 TV encoder
+
+Drivers to use: videodev, i2c-core, i2c-algo-bit,
+videocodec, vpx3220, mse3000/adv7175, zr36050, zr36016, zr36067
+
+Inputs/outputs: Composite, S-video and Internal
+
+Norms: PAL, SECAM (768x576 @ 25 fps), NTSC (640x480 @ 29.97 fps)
+
+Card number: 0
+
+Pinnacle/Miro DC30
+~~~~~~~~~~~~~~~~~~
+
+* Zoran zr36057 PCI controller
+* Zoran zr36050 MJPEG codec
+* Zoran zr36016 Video Front End
+* Micronas vpx3225d/vpx3220a/vpx3216b TV decoder
+* Analog Devices adv7176 TV encoder
+
+Drivers to use: videodev, i2c-core, i2c-algo-bit,
+videocodec, vpx3220/vpx3224, adv7175, zr36050, zr36016, zr36067
+
+Inputs/outputs: Composite, S-video and Internal
+
+Norms: PAL, SECAM (768x576 @ 25 fps), NTSC (640x480 @ 29.97 fps)
+
+Card number: 3
+
+Pinnacle/Miro DC30+
+~~~~~~~~~~~~~~~~~~~
+
+* Zoran zr36067 PCI controller
+* Zoran zr36050 MJPEG codec
+* Zoran zr36016 Video Front End
+* Micronas vpx3225d/vpx3220a/vpx3216b TV decoder
+* Analog Devices adv7176 TV encoder
+
+Drivers to use: videodev, i2c-core, i2c-algo-bit,
+videocodec, vpx3220/vpx3224, adv7175, zr36050, zr36015, zr36067
+
+Inputs/outputs: Composite, S-video and Internal
+
+Norms: PAL, SECAM (768x576 @ 25 fps), NTSC (640x480 @ 29.97 fps)
+
+Card number: 4
+
+.. note::
+
+ #) No module for the mse3000 is available yet
+ #) No module for the vpx3224 is available yet
+
+1.1 What the TV decoder can do an what not
+------------------------------------------
+
+The best know TV standards are NTSC/PAL/SECAM. but for decoding a frame that
+information is not enough. There are several formats of the TV standards.
+And not every TV decoder is able to handle every format. Also the every
+combination is supported by the driver. There are currently 11 different
+tv broadcast formats all aver the world.
+
+The CCIR defines parameters needed for broadcasting the signal.
+The CCIR has defined different standards: A,B,D,E,F,G,D,H,I,K,K1,L,M,N,...
+The CCIR says not much about the colorsystem used !!!
+And talking about a colorsystem says not to much about how it is broadcast.
+
+The CCIR standards A,E,F are not used any more.
+
+When you speak about NTSC, you usually mean the standard: CCIR - M using
+the NTSC colorsystem which is used in the USA, Japan, Mexico, Canada
+and a few others.
+
+When you talk about PAL, you usually mean: CCIR - B/G using the PAL
+colorsystem which is used in many Countries.
+
+When you talk about SECAM, you mean: CCIR - L using the SECAM Colorsystem
+which is used in France, and a few others.
+
+There the other version of SECAM, CCIR - D/K is used in Bulgaria, China,
+Slovakai, Hungary, Korea (Rep.), Poland, Rumania and a others.
+
+The CCIR - H uses the PAL colorsystem (sometimes SECAM) and is used in
+Egypt, Libya, Sri Lanka, Syrain Arab. Rep.
+
+The CCIR - I uses the PAL colorsystem, and is used in Great Britain, Hong Kong,
+Ireland, Nigeria, South Africa.
+
+The CCIR - N uses the PAL colorsystem and PAL frame size but the NTSC framerate,
+and is used in Argentinia, Uruguay, an a few others
+
+We do not talk about how the audio is broadcast !
+
+A rather good sites about the TV standards are:
+http://www.sony.jp/support/
+http://info.electronicwerkstatt.de/bereiche/fernsehtechnik/frequenzen_und_normen/Fernsehnormen/
+and http://www.cabl.com/restaurant/channel.html
+
+Other weird things around: NTSC 4.43 is a modificated NTSC, which is mainly
+used in PAL VCR's that are able to play back NTSC. PAL 60 seems to be the same
+as NTSC 4.43 . The Datasheets also talk about NTSC 44, It seems as if it would
+be the same as NTSC 4.43.
+NTSC Combs seems to be a decoder mode where the decoder uses a comb filter
+to split coma and luma instead of a Delay line.
+
+But I did not defiantly find out what NTSC Comb is.
+
+Philips saa7111 TV decoder
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+- was introduced in 1997, is used in the BUZ and
+- can handle: PAL B/G/H/I, PAL N, PAL M, NTSC M, NTSC N, NTSC 4.43 and SECAM
+
+Philips saa7110a TV decoder
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+- was introduced in 1995, is used in the Pinnacle/Miro DC10(new), DC10+ and
+- can handle: PAL B/G, NTSC M and SECAM
+
+Philips saa7114 TV decoder
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+- was introduced in 2000, is used in the LML33R10 and
+- can handle: PAL B/G/D/H/I/N, PAL N, PAL M, NTSC M, NTSC 4.43 and SECAM
+
+Brooktree bt819 TV decoder
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+- was introduced in 1996, and is used in the LML33 and
+- can handle: PAL B/D/G/H/I, NTSC M
+
+Micronas vpx3220a TV decoder
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+- was introduced in 1996, is used in the DC30 and DC30+ and
+- can handle: PAL B/G/H/I, PAL N, PAL M, NTSC M, NTSC 44, PAL 60, SECAM,NTSC Comb
+
+Samsung ks0127 TV decoder
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+- is used in the AVS6EYES card and
+- can handle: NTSC-M/N/44, PAL-M/N/B/G/H/I/D/K/L and SECAM
+
+
+What the TV encoder can do an what not
+--------------------------------------
+
+The TV encoder is doing the "same" as the decoder, but in the other direction.
+You feed them digital data and the generate a Composite or SVHS signal.
+For information about the colorsystems and TV norm take a look in the
+TV decoder section.
+
+Philips saa7185 TV Encoder
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+- was introduced in 1996, is used in the BUZ
+- can generate: PAL B/G, NTSC M
+
+Brooktree bt856 TV Encoder
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+- was introduced in 1994, is used in the LML33
+- can generate: PAL B/D/G/H/I/N, PAL M, NTSC M, PAL-N (Argentina)
+
+Analog Devices adv7170 TV Encoder
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+- was introduced in 2000, is used in the LML300R10
+- can generate: PAL B/D/G/H/I/N, PAL M, NTSC M, PAL 60
+
+Analog Devices adv7175 TV Encoder
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+- was introduced in 1996, is used in the DC10, DC10+, DC10 old, DC30, DC30+
+- can generate: PAL B/D/G/H/I/N, PAL M, NTSC M
+
+ITT mse3000 TV encoder
+~~~~~~~~~~~~~~~~~~~~~~
+
+- was introduced in 1991, is used in the DC10 old
+- can generate: PAL , NTSC , SECAM
+
+Conexant bt866 TV encoder
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+- is used in AVS6EYES, and
+- can generate: NTSC/PAL, PALM, PALN
+
+The adv717x, should be able to produce PAL N. But you find nothing PAL N
+specific in the registers. Seem that you have to reuse a other standard
+to generate PAL N, maybe it would work if you use the PAL M settings.
+
+How do I get this damn thing to work
+------------------------------------
+
+Load zr36067.o. If it can't autodetect your card, use the card=X insmod
+option with X being the card number as given in the previous section.
+To have more than one card, use card=X1[,X2[,X3,[X4[..]]]]
+
+To automate this, add the following to your /etc/modprobe.d/zoran.conf:
+
+options zr36067 card=X1[,X2[,X3[,X4[..]]]]
+alias char-major-81-0 zr36067
+
+One thing to keep in mind is that this doesn't load zr36067.o itself yet. It
+just automates loading. If you start using xawtv, the device won't load on
+some systems, since you're trying to load modules as a user, which is not
+allowed ("permission denied"). A quick workaround is to add 'Load "v4l"' to
+XF86Config-4 when you use X by default, or to run 'v4l-conf -c <device>' in
+one of your startup scripts (normally rc.local) if you don't use X. Both
+make sure that the modules are loaded on startup, under the root account.
+
+What mainboard should I use (or why doesn't my card work)
+---------------------------------------------------------
+
+
+<insert lousy disclaimer here>. In short: good=SiS/Intel, bad=VIA.
+
+Experience tells us that people with a Buz, on average, have more problems
+than users with a DC10+/LML33. Also, it tells us that people owning a VIA-
+based mainboard (ktXXX, MVP3) have more problems than users with a mainboard
+based on a different chipset. Here's some notes from Andrew Stevens:
+
+Here's my experience of using LML33 and Buz on various motherboards:
+
+- VIA MVP3
+ - Forget it. Pointless. Doesn't work.
+- Intel 430FX (Pentium 200)
+ - LML33 perfect, Buz tolerable (3 or 4 frames dropped per movie)
+- Intel 440BX (early stepping)
+ - LML33 tolerable. Buz starting to get annoying (6-10 frames/hour)
+- Intel 440BX (late stepping)
+ - Buz tolerable, LML3 almost perfect (occasional single frame drops)
+- SiS735
+ - LML33 perfect, Buz tolerable.
+- VIA KT133(*)
+ - LML33 starting to get annoying, Buz poor enough that I have up.
+
+- Both 440BX boards were dual CPU versions.
+
+Bernhard Praschinger later added:
+
+- AMD 751
+ - Buz perfect-tolerable
+- AMD 760
+ - Buz perfect-tolerable
+
+In general, people on the user mailinglist won't give you much of a chance
+if you have a VIA-based motherboard. They may be cheap, but sometimes, you'd
+rather want to spend some more money on better boards. In general, VIA
+mainboard's IDE/PCI performance will also suck badly compared to others.
+You'll noticed the DC10+/DC30+ aren't mentioned anywhere in the overview.
+Basically, you can assume that if the Buz works, the LML33 will work too. If
+the LML33 works, the DC10+/DC30+ will work too. They're most tolerant to
+different mainboard chipsets from all of the supported cards.
+
+If you experience timeouts during capture, buy a better mainboard or lower
+the quality/buffersize during capture (see 'Concerning buffer sizes, quality,
+output size etc.'). If it hangs, there's little we can do as of now. Check
+your IRQs and make sure the card has its own interrupts.
+
+Programming interface
+---------------------
+
+This driver conforms to video4linux2. Support for V4L1 and for the custom
+zoran ioctls has been removed in kernel 2.6.38.
+
+For programming example, please, look at lavrec.c and lavplay.c code in
+the MJPEG-tools (http://mjpeg.sf.net/).
+
+Additional notes for software developers:
+
+ The driver returns maxwidth and maxheight parameters according to
+ the current TV standard (norm). Therefore, the software which
+ communicates with the driver and "asks" for these parameters should
+ first set the correct norm. Well, it seems logically correct: TV
+ standard is "more constant" for current country than geometry
+ settings of a variety of TV capture cards which may work in ITU or
+ square pixel format.
+
+Applications
+------------
+
+Applications known to work with this driver:
+
+TV viewing:
+
+* xawtv
+* kwintv
+* probably any TV application that supports video4linux or video4linux2.
+
+MJPEG capture/playback:
+
+* mjpegtools/lavtools (or Linux Video Studio)
+* gstreamer
+* mplayer
+
+General raw capture:
+
+* xawtv
+* gstreamer
+* probably any application that supports video4linux or video4linux2
+
+Video editing:
+
+* Cinelerra
+* MainActor
+* mjpegtools (or Linux Video Studio)
+
+
+Concerning buffer sizes, quality, output size etc.
+--------------------------------------------------
+
+
+The zr36060 can do 1:2 JPEG compression. This is really the theoretical
+maximum that the chipset can reach. The driver can, however, limit compression
+to a maximum (size) of 1:4. The reason for this is that some cards (e.g. Buz)
+can't handle 1:2 compression without stopping capture after only a few minutes.
+With 1:4, it'll mostly work. If you have a Buz, use 'low_bitrate=1' to go into
+1:4 max. compression mode.
+
+100% JPEG quality is thus 1:2 compression in practice. So for a full PAL frame
+(size 720x576). The JPEG fields are stored in YUY2 format, so the size of the
+fields are 720x288x16/2 bits/field (2 fields/frame) = 207360 bytes/field x 2 =
+414720 bytes/frame (add some more bytes for headers and DHT (huffman)/DQT
+(quantization) tables, and you'll get to something like 512kB per frame for
+1:2 compression. For 1:4 compression, you'd have frames of half this size.
+
+Some additional explanation by Martin Samuelsson, which also explains the
+importance of buffer sizes:
+--
+> Hmm, I do not think it is really that way. With the current (downloaded
+> at 18:00 Monday) driver I get that output sizes for 10 sec:
+> -q 50 -b 128 : 24.283.332 Bytes
+> -q 50 -b 256 : 48.442.368
+> -q 25 -b 128 : 24.655.992
+> -q 25 -b 256 : 25.859.820
+
+I woke up, and can't go to sleep again. I'll kill some time explaining why
+this doesn't look strange to me.
+
+Let's do some math using a width of 704 pixels. I'm not sure whether the Buz
+actually use that number or not, but that's not too important right now.
+
+704x288 pixels, one field, is 202752 pixels. Divided by 64 pixels per block;
+3168 blocks per field. Each pixel consist of two bytes; 128 bytes per block;
+1024 bits per block. 100% in the new driver mean 1:2 compression; the maximum
+output becomes 512 bits per block. Actually 510, but 512 is simpler to use
+for calculations.
+
+Let's say that we specify d1q50. We thus want 256 bits per block; times 3168
+becomes 811008 bits; 101376 bytes per field. We're talking raw bits and bytes
+here, so we don't need to do any fancy corrections for bits-per-pixel or such
+things. 101376 bytes per field.
+
+d1 video contains two fields per frame. Those sum up to 202752 bytes per
+frame, and one of those frames goes into each buffer.
+
+But wait a second! -b128 gives 128kB buffers! It's not possible to cram
+202752 bytes of JPEG data into 128kB!
+
+This is what the driver notice and automatically compensate for in your
+examples. Let's do some math using this information:
+
+128kB is 131072 bytes. In this buffer, we want to store two fields, which
+leaves 65536 bytes for each field. Using 3168 blocks per field, we get
+20.68686868... available bytes per block; 165 bits. We can't allow the
+request for 256 bits per block when there's only 165 bits available! The -q50
+option is silently overridden, and the -b128 option takes precedence, leaving
+us with the equivalence of -q32.
+
+This gives us a data rate of 165 bits per block, which, times 3168, sums up
+to 65340 bytes per field, out of the allowed 65536. The current driver has
+another level of rate limiting; it won't accept -q values that fill more than
+6/8 of the specified buffers. (I'm not sure why. "Playing it safe" seem to be
+a safe bet. Personally, I think I would have lowered requested-bits-per-block
+by one, or something like that.) We can't use 165 bits per block, but have to
+lower it again, to 6/8 of the available buffer space: We end up with 124 bits
+per block, the equivalence of -q24. With 128kB buffers, you can't use greater
+than -q24 at -d1. (And PAL, and 704 pixels width...)
+
+The third example is limited to -q24 through the same process. The second
+example, using very similar calculations, is limited to -q48. The only
+example that actually grab at the specified -q value is the last one, which
+is clearly visible, looking at the file size.
+--
+
+Conclusion: the quality of the resulting movie depends on buffer size, quality,
+whether or not you use 'low_bitrate=1' as insmod option for the zr36060.c
+module to do 1:4 instead of 1:2 compression, etc.
+
+If you experience timeouts, lowering the quality/buffersize or using
+'low_bitrate=1 as insmod option for zr36060.o might actually help, as is
+proven by the Buz.
+
+It hangs/crashes/fails/whatevers! Help!
+---------------------------------------
+
+Make sure that the card has its own interrupts (see /proc/interrupts), check
+the output of dmesg at high verbosity (load zr36067.o with debug=2,
+load all other modules with debug=1). Check that your mainboard is favorable
+(see question 2) and if not, test the card in another computer. Also see the
+notes given in question 3 and try lowering quality/buffersize/capturesize
+if recording fails after a period of time.
+
+If all this doesn't help, give a clear description of the problem including
+detailed hardware information (memory+brand, mainboard+chipset+brand, which
+MJPEG card, processor, other PCI cards that might be of interest), give the
+system PnP information (/proc/interrupts, /proc/dma, /proc/devices), and give
+the kernel version, driver version, glibc version, gcc version and any other
+information that might possibly be of interest. Also provide the dmesg output
+at high verbosity. See 'Contacting' on how to contact the developers.
+
+Maintainers/Contacting
+----------------------
+
+Previous maintainers/developers of this driver are
+- Laurent Pinchart <laurent.pinchart@skynet.be>
+- Ronald Bultje rbultje@ronald.bitfreak.net
+- Serguei Miridonov <mirsev@cicese.mx>
+- Wolfgang Scherr <scherr@net4you.net>
+- Dave Perks <dperks@ibm.net>
+- Rainer Johanni <Rainer@Johanni.de>
+
+Driver's License
+----------------
+
+ This driver is distributed under the terms of the General Public License.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+See http://www.gnu.org/ for more information.
diff --git a/Documentation/driver-api/media/index.rst b/Documentation/driver-api/media/index.rst
index 3283509..c140692 100644
--- a/Documentation/driver-api/media/index.rst
+++ b/Documentation/driver-api/media/index.rst
@@ -34,6 +34,7 @@
mc-core
cec-core
csi2
+ camera-sensor
drivers/index
diff --git a/Documentation/driver-api/media/v4l2-subdev.rst b/Documentation/driver-api/media/v4l2-subdev.rst
index bc7e1fc..6248ea9 100644
--- a/Documentation/driver-api/media/v4l2-subdev.rst
+++ b/Documentation/driver-api/media/v4l2-subdev.rst
@@ -34,7 +34,7 @@
From the bridge driver perspective, you load the sub-device module and somehow
obtain the :c:type:`v4l2_subdev` pointer. For i2c devices this is easy: you call
``i2c_get_clientdata()``. For other buses something similar needs to be done.
-Helper functions exists for sub-devices on an I2C bus that do most of this
+Helper functions exist for sub-devices on an I2C bus that do most of this
tricky work for you.
Each :c:type:`v4l2_subdev` contains function pointers that sub-device drivers
@@ -138,6 +138,9 @@
and sink of the link. Subdev drivers are also free to use this function to
perform the checks mentioned above in addition to their own checks.
+Subdev registration
+~~~~~~~~~~~~~~~~~~~
+
There are currently two ways to register subdevices with the V4L2 core. The
first (traditional) possibility is to have subdevices registered by bridge
drivers. This can be done when the bridge driver has the complete information
@@ -157,7 +160,7 @@
Using one or the other registration method only affects the probing process, the
run-time bridge-subdevice interaction is in both cases the same.
-In the synchronous case a device (bridge) driver needs to register the
+In the **synchronous** case a device (bridge) driver needs to register the
:c:type:`v4l2_subdev` with the v4l2_device:
:c:func:`v4l2_device_register_subdev <v4l2_device_register_subdev>`
@@ -179,7 +182,51 @@
Afterwards the subdev module can be unloaded and
:c:type:`sd <v4l2_subdev>`->dev == ``NULL``.
-You can call an ops function either directly:
+In the **asynchronous** case subdevice probing can be invoked independently of
+the bridge driver availability. The subdevice driver then has to verify whether
+all the requirements for a successful probing are satisfied. This can include a
+check for a master clock availability. If any of the conditions aren't satisfied
+the driver might decide to return ``-EPROBE_DEFER`` to request further reprobing
+attempts. Once all conditions are met the subdevice shall be registered using
+the :c:func:`v4l2_async_register_subdev` function. Unregistration is
+performed using the :c:func:`v4l2_async_unregister_subdev` call. Subdevices
+registered this way are stored in a global list of subdevices, ready to be
+picked up by bridge drivers.
+
+Bridge drivers in turn have to register a notifier object. This is
+performed using the :c:func:`v4l2_async_notifier_register` call. To
+unregister the notifier the driver has to call
+:c:func:`v4l2_async_notifier_unregister`. The former of the two functions
+takes two arguments: a pointer to struct :c:type:`v4l2_device` and a
+pointer to struct :c:type:`v4l2_async_notifier`.
+
+Before registering the notifier, bridge drivers must do two things:
+first, the notifier must be initialized using the
+:c:func:`v4l2_async_notifier_init`. Second, bridge drivers can then
+begin to form a list of subdevice descriptors that the bridge device
+needs for its operation. Subdevice descriptors are added to the notifier
+using the :c:func:`v4l2_async_notifier_add_subdev` call. This function
+takes two arguments: a pointer to struct :c:type:`v4l2_async_notifier`,
+and a pointer to the subdevice descripter, which is of type struct
+:c:type:`v4l2_async_subdev`.
+
+The V4L2 core will then use these descriptors to match asynchronously
+registered subdevices to them. If a match is detected the ``.bound()``
+notifier callback is called. After all subdevices have been located the
+.complete() callback is called. When a subdevice is removed from the
+system the .unbind() method is called. All three callbacks are optional.
+
+Calling subdev operations
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The advantage of using :c:type:`v4l2_subdev` is that it is a generic struct and
+does not contain any knowledge about the underlying hardware. So a driver might
+contain several subdevs that use an I2C bus, but also a subdev that is
+controlled through GPIO pins. This distinction is only relevant when setting
+up the device, but once the subdev is registered it is completely transparent.
+
+Once te subdev has been registered you can call an ops function either
+directly:
.. code-block:: c
@@ -191,7 +238,7 @@
err = v4l2_subdev_call(sd, core, g_std, &norm);
-The macro will to the right ``NULL`` pointer checks and returns ``-ENODEV``
+The macro will do the right ``NULL`` pointer checks and returns ``-ENODEV``
if :c:type:`sd <v4l2_subdev>` is ``NULL``, ``-ENOIOCTLCMD`` if either
:c:type:`sd <v4l2_subdev>`->core or :c:type:`sd <v4l2_subdev>`->core->g_std is ``NULL``, or the actual result of the
:c:type:`sd <v4l2_subdev>`->ops->core->g_std ops.
@@ -232,46 +279,6 @@
whether there is a ``notify()`` callback defined and returns ``-ENODEV`` if not.
Otherwise the result of the ``notify()`` call is returned.
-The advantage of using :c:type:`v4l2_subdev` is that it is a generic struct and
-does not contain any knowledge about the underlying hardware. So a driver might
-contain several subdevs that use an I2C bus, but also a subdev that is
-controlled through GPIO pins. This distinction is only relevant when setting
-up the device, but once the subdev is registered it is completely transparent.
-
-In the asynchronous case subdevice probing can be invoked independently of the
-bridge driver availability. The subdevice driver then has to verify whether all
-the requirements for a successful probing are satisfied. This can include a
-check for a master clock availability. If any of the conditions aren't satisfied
-the driver might decide to return ``-EPROBE_DEFER`` to request further reprobing
-attempts. Once all conditions are met the subdevice shall be registered using
-the :c:func:`v4l2_async_register_subdev` function. Unregistration is
-performed using the :c:func:`v4l2_async_unregister_subdev` call. Subdevices
-registered this way are stored in a global list of subdevices, ready to be
-picked up by bridge drivers.
-
-Bridge drivers in turn have to register a notifier object. This is
-performed using the :c:func:`v4l2_async_notifier_register` call. To
-unregister the notifier the driver has to call
-:c:func:`v4l2_async_notifier_unregister`. The former of the two functions
-takes two arguments: a pointer to struct :c:type:`v4l2_device` and a
-pointer to struct :c:type:`v4l2_async_notifier`.
-
-Before registering the notifier, bridge drivers must do two things:
-first, the notifier must be initialized using the
-:c:func:`v4l2_async_notifier_init`. Second, bridge drivers can then
-begin to form a list of subdevice descriptors that the bridge device
-needs for its operation. Subdevice descriptors are added to the notifier
-using the :c:func:`v4l2_async_notifier_add_subdev` call. This function
-takes two arguments: a pointer to struct :c:type:`v4l2_async_notifier`,
-and a pointer to the subdevice descripter, which is of type struct
-:c:type:`v4l2_async_subdev`.
-
-The V4L2 core will then use these descriptors to match asynchronously
-registered subdevices to them. If a match is detected the ``.bound()``
-notifier callback is called. After all subdevices have been located the
-.complete() callback is called. When a subdevice is removed from the
-system the .unbind() method is called. All three callbacks are optional.
-
V4L2 sub-device userspace API
-----------------------------
@@ -488,5 +495,3 @@
---------------------------------------------
.. kernel-doc:: include/media/v4l2-subdev.h
-
-.. kernel-doc:: include/media/v4l2-async.h
diff --git a/Documentation/driver-api/nvdimm/index.rst b/Documentation/driver-api/nvdimm/index.rst
index a4f8f98..5863bd0 100644
--- a/Documentation/driver-api/nvdimm/index.rst
+++ b/Documentation/driver-api/nvdimm/index.rst
@@ -10,3 +10,4 @@
nvdimm
btt
security
+ firmware-activate
diff --git a/Documentation/driver-api/soundwire/stream.rst b/Documentation/driver-api/soundwire/stream.rst
index 8858cea..b432a2d 100644
--- a/Documentation/driver-api/soundwire/stream.rst
+++ b/Documentation/driver-api/soundwire/stream.rst
@@ -518,10 +518,10 @@
the stream pointer for all DAIS connected to a stream and releases the
memory allocated for the stream.
- Not Supported
+Not Supported
=============
1. A single port with multiple channels supported cannot be used between two
-streams or across stream. For example a port with 4 channels cannot be used
-to handle 2 independent stereo streams even though it's possible in theory
-in SoundWire.
+ streams or across stream. For example a port with 4 channels cannot be used
+ to handle 2 independent stereo streams even though it's possible in theory
+ in SoundWire.
diff --git a/Documentation/fb/fbcon.rst b/Documentation/fb/fbcon.rst
index e57a3d1d..328f698 100644
--- a/Documentation/fb/fbcon.rst
+++ b/Documentation/fb/fbcon.rst
@@ -87,15 +87,8 @@
Note, not all drivers can handle font with widths not divisible by 8,
such as vga16fb.
-2. fbcon=scrollback:<value>[k]
- The scrollback buffer is memory that is used to preserve display
- contents that has already scrolled past your view. This is accessed
- by using the Shift-PageUp key combination. The value 'value' is any
- integer. It defaults to 32KB. The 'k' suffix is optional, and will
- multiply the 'value' by 1024.
-
-3. fbcon=map:<0123>
+2. fbcon=map:<0123>
This is an interesting option. It tells which driver gets mapped to
which console. The value '0123' is a sequence that gets repeated until
@@ -116,7 +109,7 @@
Later on, when you want to map the console the to the framebuffer
device, you can use the con2fbmap utility.
-4. fbcon=vc:<n1>-<n2>
+3. fbcon=vc:<n1>-<n2>
This option tells fbcon to take over only a range of consoles as
specified by the values 'n1' and 'n2'. The rest of the consoles
@@ -127,7 +120,7 @@
is typically located on the same video card. Thus, the consoles that
are controlled by the VGA console will be garbled.
-5. fbcon=rotate:<n>
+4. fbcon=rotate:<n>
This option changes the orientation angle of the console display. The
value 'n' accepts the following:
@@ -152,21 +145,21 @@
Actually, the underlying fb driver is totally ignorant of console
rotation.
-6. fbcon=margin:<color>
+5. fbcon=margin:<color>
This option specifies the color of the margins. The margins are the
leftover area at the right and the bottom of the screen that are not
used by text. By default, this area will be black. The 'color' value
is an integer number that depends on the framebuffer driver being used.
-7. fbcon=nodefer
+6. fbcon=nodefer
If the kernel is compiled with deferred fbcon takeover support, normally
the framebuffer contents, left in place by the firmware/bootloader, will
be preserved until there actually is some text is output to the console.
This option causes fbcon to bind immediately to the fbdev device.
-8. fbcon=logo-pos:<location>
+7. fbcon=logo-pos:<location>
The only possible 'location' is 'center' (without quotes), and when
given, the bootup logo is moved from the default top-left corner
@@ -174,7 +167,7 @@
displayed due to multiple CPUs, the collected line of logos is moved
as a whole.
-9. fbcon=logo-count:<n>
+8. fbcon=logo-count:<n>
The value 'n' overrides the number of bootup logos. 0 disables the
logo, and -1 gives the default which is the number of online CPUs.
diff --git a/Documentation/fb/matroxfb.rst b/Documentation/fb/matroxfb.rst
index f1859d9..6158c49 100644
--- a/Documentation/fb/matroxfb.rst
+++ b/Documentation/fb/matroxfb.rst
@@ -317,8 +317,6 @@
- interlaced text mode is not supported; it looks like hardware limitation,
but I'm not sure.
- Gxx0 SGRAM/SDRAM is not autodetected.
- - If you are using more than one framebuffer device, you must boot kernel
- with 'video=scrollback:0'.
- maybe more...
And following misfeatures:
diff --git a/Documentation/fb/sstfb.rst b/Documentation/fb/sstfb.rst
index 8e8c1b9..42466ff 100644
--- a/Documentation/fb/sstfb.rst
+++ b/Documentation/fb/sstfb.rst
@@ -185,9 +185,6 @@
contact me.
- The 24/32 is not likely to work anytime soon, knowing that the
hardware does ... unusual things in 24/32 bpp.
-- When used with another video board, current limitations of the linux
- console subsystem can cause some troubles, specifically, you should
- disable software scrollback, as it can oops badly ...
Todo
====
diff --git a/Documentation/fb/vesafb.rst b/Documentation/fb/vesafb.rst
index 6821c87..f890a4f 100644
--- a/Documentation/fb/vesafb.rst
+++ b/Documentation/fb/vesafb.rst
@@ -135,8 +135,6 @@
* scrolling (fullscreen) is fast, because there is
no need to copy around data.
- * You'll get scrollback (the Shift-PgUp thing),
- the video memory can be used as scrollback buffer
kontra:
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index 4c536e6..98f59a8 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -34,8 +34,6 @@
quota
seq_file
sharedsubtree
- sysfs-pci
- sysfs-tagging
automount-support
diff --git a/Documentation/filesystems/mount_api.rst b/Documentation/filesystems/mount_api.rst
index 29c169c..d7f53d6 100644
--- a/Documentation/filesystems/mount_api.rst
+++ b/Documentation/filesystems/mount_api.rst
@@ -1,7 +1,7 @@
.. SPDX-License-Identifier: GPL-2.0
====================
-fILESYSTEM Mount API
+Filesystem Mount API
====================
.. CONTENTS
@@ -479,7 +479,7 @@
int vfs_parse_fs_param(struct fs_context *fc,
struct fs_parameter *param);
- Supply a single mount parameter to the filesystem context. This include
+ Supply a single mount parameter to the filesystem context. This includes
the specification of the source/device which is specified as the "source"
parameter (which may be specified multiple times if the filesystem
supports that).
@@ -592,8 +592,7 @@
one.
-=====================
-PARAMETER DESCRIPTION
+Parameter Description
=====================
Parameters are described using structures defined in linux/fs_parser.h.
diff --git a/Documentation/filesystems/seq_file.rst b/Documentation/filesystems/seq_file.rst
index 7f7ee06..5685648 100644
--- a/Documentation/filesystems/seq_file.rst
+++ b/Documentation/filesystems/seq_file.rst
@@ -129,7 +129,9 @@
called SEQ_START_TOKEN; it can be used if you wish to instruct your
show() function (described below) to print a header at the top of the
output. SEQ_START_TOKEN should only be used if the offset is zero,
-however.
+however. SEQ_START_TOKEN has no special meaning to the core seq_file
+code. It is provided as a convenience for a start() funciton to
+communicate with the next() and show() functions.
The next function to implement is called, amazingly, next(); its job is to
move the iterator forward to the next position in the sequence. The
@@ -145,6 +147,22 @@
return spos;
}
+The next() function should set ``*pos`` to a value that start() can use
+to find the new location in the sequence. When the iterator is being
+stored in the private data area, rather than being reinitialized on each
+start(), it might seem sufficient to simply set ``*pos`` to any non-zero
+value (zero always tells start() to restart the sequence). This is not
+sufficient due to historical problems.
+
+Historically, many next() functions have *not* updated ``*pos`` at
+end-of-file. If the value is then used by start() to initialise the
+iterator, this can result in corner cases where the last entry in the
+sequence is reported twice in the file. In order to discourage this bug
+from being resurrected, the core seq_file code now produces a warning if
+a next() function does not change the value of ``*pos``. Consequently a
+next() function *must* change the value of ``*pos``, and of course must
+set it to a non-zero value.
+
The stop() function closes a session; its job, of course, is to clean
up. If dynamic memory is allocated for the iterator, stop() is the
place to free it; if a lock was taken by start(), stop() must release
diff --git a/Documentation/filesystems/sysfs.rst b/Documentation/filesystems/sysfs.rst
index ab0f779..5a3209a 100644
--- a/Documentation/filesystems/sysfs.rst
+++ b/Documentation/filesystems/sysfs.rst
@@ -172,14 +172,13 @@
To illustrate::
- #define to_dev(obj) container_of(obj, struct device, kobj)
#define to_dev_attr(_attr) container_of(_attr, struct device_attribute, attr)
static ssize_t dev_attr_show(struct kobject *kobj, struct attribute *attr,
char *buf)
{
struct device_attribute *dev_attr = to_dev_attr(attr);
- struct device *dev = to_dev(kobj);
+ struct device *dev = kobj_to_dev(kobj);
ssize_t ret = -EIO;
if (dev_attr->show)
diff --git a/Documentation/filesystems/ubifs-authentication.rst b/Documentation/filesystems/ubifs-authentication.rst
index 1f39c8c..5210aed 100644
--- a/Documentation/filesystems/ubifs-authentication.rst
+++ b/Documentation/filesystems/ubifs-authentication.rst
@@ -1,11 +1,13 @@
.. SPDX-License-Identifier: GPL-2.0
-:orphan:
-
.. UBIFS Authentication
.. sigma star gmbh
.. 2018
+============================
+UBIFS Authentication Support
+============================
+
Introduction
============
diff --git a/Documentation/firmware-guide/acpi/index.rst b/Documentation/firmware-guide/acpi/index.rst
index ad3b5af..f72b5f1 100644
--- a/Documentation/firmware-guide/acpi/index.rst
+++ b/Documentation/firmware-guide/acpi/index.rst
@@ -26,3 +26,4 @@
lpit
video_extension
extcon-intel-int3496
+ intel-pmc-mux
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index 750d3a97..77a1ae9 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -158,6 +158,7 @@
smsc47b397
smsc47m192
smsc47m1
+ sparx5-temp
tc654
tc74
thmc50
diff --git a/Documentation/ia64/index.rst b/Documentation/ia64/index.rst
index 0436e10..4bdfe28 100644
--- a/Documentation/ia64/index.rst
+++ b/Documentation/ia64/index.rst
@@ -15,4 +15,3 @@
irq-redir
mca
serial
- xen
diff --git a/Documentation/ia64/xen.rst b/Documentation/ia64/xen.rst
deleted file mode 100644
index 831339c..0000000
--- a/Documentation/ia64/xen.rst
+++ /dev/null
@@ -1,206 +0,0 @@
-********************************************************
-Recipe for getting/building/running Xen/ia64 with pv_ops
-********************************************************
-This recipe describes how to get xen-ia64 source and build it,
-and run domU with pv_ops.
-
-Requirements
-============
-
- - python
- - mercurial
- it (aka "hg") is an open-source source code
- management software. See the below.
- http://www.selenic.com/mercurial/wiki/
- - git
- - bridge-utils
-
-Getting and Building Xen and Dom0
-=================================
-
- My environment is:
-
- - Machine : Tiger4
- - Domain0 OS : RHEL5
- - DomainU OS : RHEL5
-
- 1. Download source::
-
- # hg clone http://xenbits.xensource.com/ext/ia64/xen-unstable.hg
- # cd xen-unstable.hg
- # hg clone http://xenbits.xensource.com/ext/ia64/linux-2.6.18-xen.hg
-
- 2. # make world
-
- 3. # make install-tools
-
- 4. copy kernels and xen::
-
- # cp xen/xen.gz /boot/efi/efi/redhat/
- # cp build-linux-2.6.18-xen_ia64/vmlinux.gz \
- /boot/efi/efi/redhat/vmlinuz-2.6.18.8-xen
-
- 5. make initrd for Dom0/DomU::
-
- # make -C linux-2.6.18-xen.hg ARCH=ia64 modules_install \
- O=$(pwd)/build-linux-2.6.18-xen_ia64
- # mkinitrd -f /boot/efi/efi/redhat/initrd-2.6.18.8-xen.img \
- 2.6.18.8-xen --builtin mptspi --builtin mptbase \
- --builtin mptscsih --builtin uhci-hcd --builtin ohci-hcd \
- --builtin ehci-hcd
-
-Making a disk image for guest OS
-================================
-
- 1. make file::
-
- # dd if=/dev/zero of=/root/rhel5.img bs=1M seek=4096 count=0
- # mke2fs -F -j /root/rhel5.img
- # mount -o loop /root/rhel5.img /mnt
- # cp -ax /{dev,var,etc,usr,bin,sbin,lib} /mnt
- # mkdir /mnt/{root,proc,sys,home,tmp}
-
- Note: You may miss some device files. If so, please create them
- with mknod. Or you can use tar instead of cp.
-
- 2. modify DomU's fstab::
-
- # vi /mnt/etc/fstab
- /dev/xvda1 / ext3 defaults 1 1
- none /dev/pts devpts gid=5,mode=620 0 0
- none /dev/shm tmpfs defaults 0 0
- none /proc proc defaults 0 0
- none /sys sysfs defaults 0 0
-
- 3. modify inittab
-
- set runlevel to 3 to avoid X trying to start::
-
- # vi /mnt/etc/inittab
- id:3:initdefault:
-
- Start a getty on the hvc0 console::
-
- X0:2345:respawn:/sbin/mingetty hvc0
-
- tty1-6 mingetty can be commented out
-
- 4. add hvc0 into /etc/securetty::
-
- # vi /mnt/etc/securetty (add hvc0)
-
- 5. umount::
-
- # umount /mnt
-
-FYI, virt-manager can also make a disk image for guest OS.
-It's GUI tools and easy to make it.
-
-Boot Xen & Domain0
-==================
-
- 1. replace elilo
- elilo of RHEL5 can boot Xen and Dom0.
- If you use old elilo (e.g RHEL4), please download from the below
- http://elilo.sourceforge.net/cgi-bin/blosxom
- and copy into /boot/efi/efi/redhat/::
-
- # cp elilo-3.6-ia64.efi /boot/efi/efi/redhat/elilo.efi
-
- 2. modify elilo.conf (like the below)::
-
- # vi /boot/efi/efi/redhat/elilo.conf
- prompt
- timeout=20
- default=xen
- relocatable
-
- image=vmlinuz-2.6.18.8-xen
- label=xen
- vmm=xen.gz
- initrd=initrd-2.6.18.8-xen.img
- read-only
- append=" -- rhgb root=/dev/sda2"
-
-The append options before "--" are for xen hypervisor,
-the options after "--" are for dom0.
-
-FYI, your machine may need console options like
-"com1=19200,8n1 console=vga,com1". For example,
-append="com1=19200,8n1 console=vga,com1 -- rhgb console=tty0 \
-console=ttyS0 root=/dev/sda2"
-
-Getting and Building domU with pv_ops
-=====================================
-
- 1. get pv_ops tree::
-
- # git clone http://people.valinux.co.jp/~yamahata/xen-ia64/linux-2.6-xen-ia64.git/
-
- 2. git branch (if necessary)::
-
- # cd linux-2.6-xen-ia64/
- # git checkout -b your_branch origin/xen-ia64-domu-minimal-2008may19
-
- Note:
- The current branch is xen-ia64-domu-minimal-2008may19.
- But you would find the new branch. You can see with
- "git branch -r" to get the branch lists.
-
- http://people.valinux.co.jp/~yamahata/xen-ia64/for_eagl/linux-2.6-ia64-pv-ops.git/
-
- is also available.
-
- The tree is based on
-
- git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 test)
-
- 3. copy .config for pv_ops of domU::
-
- # cp arch/ia64/configs/xen_domu_wip_defconfig .config
-
- 4. make kernel with pv_ops::
-
- # make oldconfig
- # make
-
- 5. install the kernel and initrd::
-
- # cp vmlinux.gz /boot/efi/efi/redhat/vmlinuz-2.6-pv_ops-xenU
- # make modules_install
- # mkinitrd -f /boot/efi/efi/redhat/initrd-2.6-pv_ops-xenU.img \
- 2.6.26-rc3xen-ia64-08941-g1b12161 --builtin mptspi \
- --builtin mptbase --builtin mptscsih --builtin uhci-hcd \
- --builtin ohci-hcd --builtin ehci-hcd
-
-Boot DomainU with pv_ops
-========================
-
- 1. make config of DomU::
-
- # vi /etc/xen/rhel5
- kernel = "/boot/efi/efi/redhat/vmlinuz-2.6-pv_ops-xenU"
- ramdisk = "/boot/efi/efi/redhat/initrd-2.6-pv_ops-xenU.img"
- vcpus = 1
- memory = 512
- name = "rhel5"
- disk = [ 'file:/root/rhel5.img,xvda1,w' ]
- root = "/dev/xvda1 ro"
- extra= "rhgb console=hvc0"
-
- 2. After boot xen and dom0, start xend::
-
- # /etc/init.d/xend start
-
- ( In the debugging case, `# XEND_DEBUG=1 xend trace_start` )
-
- 3. start domU::
-
- # xm create -c rhel5
-
-Reference
-=========
-- Wiki of Xen/IA64 upstream merge
- http://wiki.xensource.com/xenwiki/XenIA64/UpstreamMerge
-
-Written by Akio Takebe <takebe_akio@jp.fujitsu.com> on 28 May 2008
diff --git a/Documentation/iio/iio_configfs.rst b/Documentation/iio/iio_configfs.rst
index 6e38cbb..3a5d76f 100644
--- a/Documentation/iio/iio_configfs.rst
+++ b/Documentation/iio/iio_configfs.rst
@@ -53,7 +53,7 @@
*/
}
- static int iio_trig_hrtimer_remove(struct iio_sw_trigger *swt)
+ static int iio_trig_sample_remove(struct iio_sw_trigger *swt)
{
/*
* This undoes the actions in iio_trig_sample_probe
diff --git a/Documentation/kbuild/llvm.rst b/Documentation/kbuild/llvm.rst
index dae90c2..cf3ca23 100644
--- a/Documentation/kbuild/llvm.rst
+++ b/Documentation/kbuild/llvm.rst
@@ -1,3 +1,5 @@
+.. _kbuild_llvm:
+
==============================
Building Linux with Clang/LLVM
==============================
@@ -73,6 +75,8 @@
- `Wiki <https://github.com/ClangBuiltLinux/linux/wiki>`_
- `Beginner Bugs <https://github.com/ClangBuiltLinux/linux/issues?q=is%3Aopen+is%3Aissue+label%3A%22good+first+issue%22>`_
+.. _getting_llvm:
+
Getting LLVM
-------------
diff --git a/Documentation/locking/lockdep-design.rst b/Documentation/locking/lockdep-design.rst
index 23fcbc4..cec03bd1 100644
--- a/Documentation/locking/lockdep-design.rst
+++ b/Documentation/locking/lockdep-design.rst
@@ -392,3 +392,261 @@
a later run of this command to identify the leakers. This same output
can also help you find situations where runtime lock initialization has
been omitted.
+
+Recursive read locks:
+---------------------
+The whole of the rest document tries to prove a certain type of cycle is equivalent
+to deadlock possibility.
+
+There are three types of lockers: writers (i.e. exclusive lockers, like
+spin_lock() or write_lock()), non-recursive readers (i.e. shared lockers, like
+down_read()) and recursive readers (recursive shared lockers, like rcu_read_lock()).
+And we use the following notations of those lockers in the rest of the document:
+
+ W or E: stands for writers (exclusive lockers).
+ r: stands for non-recursive readers.
+ R: stands for recursive readers.
+ S: stands for all readers (non-recursive + recursive), as both are shared lockers.
+ N: stands for writers and non-recursive readers, as both are not recursive.
+
+Obviously, N is "r or W" and S is "r or R".
+
+Recursive readers, as their name indicates, are the lockers allowed to acquire
+even inside the critical section of another reader of the same lock instance,
+in other words, allowing nested read-side critical sections of one lock instance.
+
+While non-recursive readers will cause a self deadlock if trying to acquire inside
+the critical section of another reader of the same lock instance.
+
+The difference between recursive readers and non-recursive readers is because:
+recursive readers get blocked only by a write lock *holder*, while non-recursive
+readers could get blocked by a write lock *waiter*. Considering the follow example:
+
+ TASK A: TASK B:
+
+ read_lock(X);
+ write_lock(X);
+ read_lock_2(X);
+
+Task A gets the reader (no matter whether recursive or non-recursive) on X via
+read_lock() first. And when task B tries to acquire writer on X, it will block
+and become a waiter for writer on X. Now if read_lock_2() is recursive readers,
+task A will make progress, because writer waiters don't block recursive readers,
+and there is no deadlock. However, if read_lock_2() is non-recursive readers,
+it will get blocked by writer waiter B, and cause a self deadlock.
+
+Block conditions on readers/writers of the same lock instance:
+--------------------------------------------------------------
+There are simply four block conditions:
+
+1. Writers block other writers.
+2. Readers block writers.
+3. Writers block both recursive readers and non-recursive readers.
+4. And readers (recursive or not) don't block other recursive readers but
+ may block non-recursive readers (because of the potential co-existing
+ writer waiters)
+
+Block condition matrix, Y means the row blocks the column, and N means otherwise.
+
+ | E | r | R |
+ +---+---+---+---+
+ E | Y | Y | Y |
+ +---+---+---+---+
+ r | Y | Y | N |
+ +---+---+---+---+
+ R | Y | Y | N |
+
+ (W: writers, r: non-recursive readers, R: recursive readers)
+
+
+acquired recursively. Unlike non-recursive read locks, recursive read locks
+only get blocked by current write lock *holders* other than write lock
+*waiters*, for example:
+
+ TASK A: TASK B:
+
+ read_lock(X);
+
+ write_lock(X);
+
+ read_lock(X);
+
+is not a deadlock for recursive read locks, as while the task B is waiting for
+the lock X, the second read_lock() doesn't need to wait because it's a recursive
+read lock. However if the read_lock() is non-recursive read lock, then the above
+case is a deadlock, because even if the write_lock() in TASK B cannot get the
+lock, but it can block the second read_lock() in TASK A.
+
+Note that a lock can be a write lock (exclusive lock), a non-recursive read
+lock (non-recursive shared lock) or a recursive read lock (recursive shared
+lock), depending on the lock operations used to acquire it (more specifically,
+the value of the 'read' parameter for lock_acquire()). In other words, a single
+lock instance has three types of acquisition depending on the acquisition
+functions: exclusive, non-recursive read, and recursive read.
+
+To be concise, we call that write locks and non-recursive read locks as
+"non-recursive" locks and recursive read locks as "recursive" locks.
+
+Recursive locks don't block each other, while non-recursive locks do (this is
+even true for two non-recursive read locks). A non-recursive lock can block the
+corresponding recursive lock, and vice versa.
+
+A deadlock case with recursive locks involved is as follow:
+
+ TASK A: TASK B:
+
+ read_lock(X);
+ read_lock(Y);
+ write_lock(Y);
+ write_lock(X);
+
+Task A is waiting for task B to read_unlock() Y and task B is waiting for task
+A to read_unlock() X.
+
+Dependency types and strong dependency paths:
+---------------------------------------------
+Lock dependencies record the orders of the acquisitions of a pair of locks, and
+because there are 3 types for lockers, there are, in theory, 9 types of lock
+dependencies, but we can show that 4 types of lock dependencies are enough for
+deadlock detection.
+
+For each lock dependency:
+
+ L1 -> L2
+
+, which means lockdep has seen L1 held before L2 held in the same context at runtime.
+And in deadlock detection, we care whether we could get blocked on L2 with L1 held,
+IOW, whether there is a locker L3 that L1 blocks L3 and L2 gets blocked by L3. So
+we only care about 1) what L1 blocks and 2) what blocks L2. As a result, we can combine
+recursive readers and non-recursive readers for L1 (as they block the same types) and
+we can combine writers and non-recursive readers for L2 (as they get blocked by the
+same types).
+
+With the above combination for simplification, there are 4 types of dependency edges
+in the lockdep graph:
+
+1) -(ER)->: exclusive writer to recursive reader dependency, "X -(ER)-> Y" means
+ X -> Y and X is a writer and Y is a recursive reader.
+
+2) -(EN)->: exclusive writer to non-recursive locker dependency, "X -(EN)-> Y" means
+ X -> Y and X is a writer and Y is either a writer or non-recursive reader.
+
+3) -(SR)->: shared reader to recursive reader dependency, "X -(SR)-> Y" means
+ X -> Y and X is a reader (recursive or not) and Y is a recursive reader.
+
+4) -(SN)->: shared reader to non-recursive locker dependency, "X -(SN)-> Y" means
+ X -> Y and X is a reader (recursive or not) and Y is either a writer or
+ non-recursive reader.
+
+Note that given two locks, they may have multiple dependencies between them, for example:
+
+ TASK A:
+
+ read_lock(X);
+ write_lock(Y);
+ ...
+
+ TASK B:
+
+ write_lock(X);
+ write_lock(Y);
+
+, we have both X -(SN)-> Y and X -(EN)-> Y in the dependency graph.
+
+We use -(xN)-> to represent edges that are either -(EN)-> or -(SN)->, the
+similar for -(Ex)->, -(xR)-> and -(Sx)->
+
+A "path" is a series of conjunct dependency edges in the graph. And we define a
+"strong" path, which indicates the strong dependency throughout each dependency
+in the path, as the path that doesn't have two conjunct edges (dependencies) as
+-(xR)-> and -(Sx)->. In other words, a "strong" path is a path from a lock
+walking to another through the lock dependencies, and if X -> Y -> Z is in the
+path (where X, Y, Z are locks), and the walk from X to Y is through a -(SR)-> or
+-(ER)-> dependency, the walk from Y to Z must not be through a -(SN)-> or
+-(SR)-> dependency.
+
+We will see why the path is called "strong" in next section.
+
+Recursive Read Deadlock Detection:
+----------------------------------
+
+We now prove two things:
+
+Lemma 1:
+
+If there is a closed strong path (i.e. a strong circle), then there is a
+combination of locking sequences that causes deadlock. I.e. a strong circle is
+sufficient for deadlock detection.
+
+Lemma 2:
+
+If there is no closed strong path (i.e. strong circle), then there is no
+combination of locking sequences that could cause deadlock. I.e. strong
+circles are necessary for deadlock detection.
+
+With these two Lemmas, we can easily say a closed strong path is both sufficient
+and necessary for deadlocks, therefore a closed strong path is equivalent to
+deadlock possibility. As a closed strong path stands for a dependency chain that
+could cause deadlocks, so we call it "strong", considering there are dependency
+circles that won't cause deadlocks.
+
+Proof for sufficiency (Lemma 1):
+
+Let's say we have a strong circle:
+
+ L1 -> L2 ... -> Ln -> L1
+
+, which means we have dependencies:
+
+ L1 -> L2
+ L2 -> L3
+ ...
+ Ln-1 -> Ln
+ Ln -> L1
+
+We now can construct a combination of locking sequences that cause deadlock:
+
+Firstly let's make one CPU/task get the L1 in L1 -> L2, and then another get
+the L2 in L2 -> L3, and so on. After this, all of the Lx in Lx -> Lx+1 are
+held by different CPU/tasks.
+
+And then because we have L1 -> L2, so the holder of L1 is going to acquire L2
+in L1 -> L2, however since L2 is already held by another CPU/task, plus L1 ->
+L2 and L2 -> L3 are not -(xR)-> and -(Sx)-> (the definition of strong), which
+means either L2 in L1 -> L2 is a non-recursive locker (blocked by anyone) or
+the L2 in L2 -> L3, is writer (blocking anyone), therefore the holder of L1
+cannot get L2, it has to wait L2's holder to release.
+
+Moreover, we can have a similar conclusion for L2's holder: it has to wait L3's
+holder to release, and so on. We now can prove that Lx's holder has to wait for
+Lx+1's holder to release, and note that Ln+1 is L1, so we have a circular
+waiting scenario and nobody can get progress, therefore a deadlock.
+
+Proof for necessary (Lemma 2):
+
+Lemma 2 is equivalent to: If there is a deadlock scenario, then there must be a
+strong circle in the dependency graph.
+
+According to Wikipedia[1], if there is a deadlock, then there must be a circular
+waiting scenario, means there are N CPU/tasks, where CPU/task P1 is waiting for
+a lock held by P2, and P2 is waiting for a lock held by P3, ... and Pn is waiting
+for a lock held by P1. Let's name the lock Px is waiting as Lx, so since P1 is waiting
+for L1 and holding Ln, so we will have Ln -> L1 in the dependency graph. Similarly,
+we have L1 -> L2, L2 -> L3, ..., Ln-1 -> Ln in the dependency graph, which means we
+have a circle:
+
+ Ln -> L1 -> L2 -> ... -> Ln
+
+, and now let's prove the circle is strong:
+
+For a lock Lx, Px contributes the dependency Lx-1 -> Lx and Px+1 contributes
+the dependency Lx -> Lx+1, and since Px is waiting for Px+1 to release Lx,
+so it's impossible that Lx on Px+1 is a reader and Lx on Px is a recursive
+reader, because readers (no matter recursive or not) don't block recursive
+readers, therefore Lx-1 -> Lx and Lx -> Lx+1 cannot be a -(xR)-> -(Sx)-> pair,
+and this is true for any lock in the circle, therefore, the circle is strong.
+
+References:
+-----------
+[1]: https://en.wikipedia.org/wiki/Deadlock
+[2]: Shibu, K. (2009). Intro To Embedded Systems (1st ed.). Tata McGraw-Hill
diff --git a/Documentation/locking/seqlock.rst b/Documentation/locking/seqlock.rst
index 62c5ad9..a334b58 100644
--- a/Documentation/locking/seqlock.rst
+++ b/Documentation/locking/seqlock.rst
@@ -139,6 +139,24 @@
Read path: same as in :ref:`seqcount_t`.
+
+.. _seqcount_latch_t:
+
+Latch sequence counters (``seqcount_latch_t``)
+----------------------------------------------
+
+Latch sequence counters are a multiversion concurrency control mechanism
+where the embedded seqcount_t counter even/odd value is used to switch
+between two copies of protected data. This allows the sequence counter
+read path to safely interrupt its own write side critical section.
+
+Use seqcount_latch_t when the write side sections cannot be protected
+from interruption by readers. This is typically the case when the read
+side can be invoked from NMI handlers.
+
+Check `raw_write_seqcount_latch()` for more information.
+
+
.. _seqlock_t:
Sequential locks (``seqlock_t``)
diff --git a/Documentation/maintainer/index.rst b/Documentation/maintainer/index.rst
index d904e74..f0a6043 100644
--- a/Documentation/maintainer/index.rst
+++ b/Documentation/maintainer/index.rst
@@ -13,4 +13,5 @@
rebasing-and-merging
pull-requests
maintainer-entry-profile
+ modifying-patches
diff --git a/Documentation/maintainer/modifying-patches.rst b/Documentation/maintainer/modifying-patches.rst
new file mode 100644
index 0000000..58385d2
--- /dev/null
+++ b/Documentation/maintainer/modifying-patches.rst
@@ -0,0 +1,50 @@
+.. _modifyingpatches:
+
+Modifying Patches
+=================
+
+If you are a subsystem or branch maintainer, sometimes you need to slightly
+modify patches you receive in order to merge them, because the code is not
+exactly the same in your tree and the submitters'. If you stick strictly to
+rule (c) of the developers certificate of origin, you should ask the submitter
+to rediff, but this is a totally counter-productive waste of time and energy.
+Rule (b) allows you to adjust the code, but then it is very impolite to change
+one submitters code and make him endorse your bugs. To solve this problem, it
+is recommended that you add a line between the last Signed-off-by header and
+yours, indicating the nature of your changes. While there is nothing mandatory
+about this, it seems like prepending the description with your mail and/or
+name, all enclosed in square brackets, is noticeable enough to make it obvious
+that you are responsible for last-minute changes. Example::
+
+ Signed-off-by: Random J Developer <random@developer.example.org>
+ [lucky@maintainer.example.org: struct foo moved from foo.c to foo.h]
+ Signed-off-by: Lucky K Maintainer <lucky@maintainer.example.org>
+
+This practice is particularly helpful if you maintain a stable branch and
+want at the same time to credit the author, track changes, merge the fix,
+and protect the submitter from complaints. Note that under no circumstances
+can you change the author's identity (the From header), as it is the one
+which appears in the changelog.
+
+Special note to back-porters: It seems to be a common and useful practice
+to insert an indication of the origin of a patch at the top of the commit
+message (just after the subject line) to facilitate tracking. For instance,
+here's what we see in a 3.x-stable release::
+
+ Date: Tue Oct 7 07:26:38 2014 -0400
+
+ libata: Un-break ATA blacklist
+
+ commit 1c40279960bcd7d52dbdf1d466b20d24b99176c8 upstream.
+
+And here's what might appear in an older kernel once a patch is backported::
+
+ Date: Tue May 13 22:12:27 2008 +0200
+
+ wireless, airo: waitbusy() won't delay
+
+ [backport of 2.6 commit b7acbdfbd1f277c1eb23f344f899cfa4cd0bf36a]
+
+Whatever the format, this information provides a valuable help to people
+tracking your trees, and to people trying to troubleshoot bugs in your
+tree.
diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt
index 9618633..17c8e0c 100644
--- a/Documentation/memory-barriers.txt
+++ b/Documentation/memory-barriers.txt
@@ -546,8 +546,8 @@
[*] For information on bus mastering DMA and coherency please read:
Documentation/driver-api/pci/pci.rst
- Documentation/DMA-API-HOWTO.txt
- Documentation/DMA-API.txt
+ Documentation/core-api/dma-api-howto.rst
+ Documentation/core-api/dma-api.rst
DATA DEPENDENCY BARRIERS (HISTORICAL)
@@ -1932,8 +1932,8 @@
here.
See the subsection "Kernel I/O barrier effects" for more information on
- relaxed I/O accessors and the Documentation/DMA-API.txt file for more
- information on consistent memory.
+ relaxed I/O accessors and the Documentation/core-api/dma-api.rst file for
+ more information on consistent memory.
(*) pmem_wmb();
diff --git a/Documentation/networking/index.rst b/Documentation/networking/index.rst
index c29496f..611e4b1 100644
--- a/Documentation/networking/index.rst
+++ b/Documentation/networking/index.rst
@@ -95,6 +95,7 @@
seg6-sysctl
strparser
switchdev
+ sysfs-tagging
tc-actions-env-rules
tcp-thin
team
diff --git a/Documentation/filesystems/sysfs-tagging.rst b/Documentation/networking/sysfs-tagging.rst
similarity index 100%
rename from Documentation/filesystems/sysfs-tagging.rst
rename to Documentation/networking/sysfs-tagging.rst
diff --git a/Documentation/process/2.Process.rst b/Documentation/process/2.Process.rst
index 4ae1e0f..e05fb1b 100644
--- a/Documentation/process/2.Process.rst
+++ b/Documentation/process/2.Process.rst
@@ -405,7 +405,7 @@
http://vger.kernel.org/vger-lists.html
There are lists hosted elsewhere, though; a number of them are at
-lists.redhat.com.
+redhat.com/mailman/listinfo.
The core mailing list for kernel development is, of course, linux-kernel.
This list is an intimidating place to be; volume can reach 500 messages per
diff --git a/Documentation/process/changes.rst b/Documentation/process/changes.rst
index ee74176..dac1771 100644
--- a/Documentation/process/changes.rst
+++ b/Documentation/process/changes.rst
@@ -30,6 +30,7 @@
Program Minimal version Command to check the version
====================== =============== ========================================
GNU C 4.9 gcc --version
+Clang/LLVM (optional) 10.0.1 clang --version
GNU make 3.81 make --version
binutils 2.23 ld -v
flex 2.5.35 flex --version
@@ -68,6 +69,15 @@
The gcc version requirements may vary depending on the type of CPU in your
computer.
+Clang/LLVM (optional)
+---------------------
+
+The latest formal release of clang and LLVM utils (according to
+`releases.llvm.org <https://releases.llvm.org>`_) are supported for building
+kernels. Older releases aren't guaranteed to work, and we may drop workarounds
+from the kernel that were used to support older versions. Please see additional
+docs on :ref:`Building Linux with Clang/LLVM <kbuild_llvm>`.
+
Make
----
@@ -331,6 +341,11 @@
- <ftp://ftp.gnu.org/gnu/gcc/>
+Clang/LLVM
+----------
+
+- :ref:`Getting LLVM <getting_llvm>`.
+
Make
----
diff --git a/Documentation/process/deprecated.rst b/Documentation/process/deprecated.rst
index 918e32d..ff71d80 100644
--- a/Documentation/process/deprecated.rst
+++ b/Documentation/process/deprecated.rst
@@ -51,24 +51,6 @@
"unreachable" conditions. (For example, see commits like `this one
<https://git.kernel.org/linus/d4689846881d160a4d12a514e991a740bcb5d65a>`_.)
-uninitialized_var()
--------------------
-For any compiler warnings about uninitialized variables, just add
-an initializer. Using the uninitialized_var() macro (or similar
-warning-silencing tricks) is dangerous as it papers over `real bugs
-<https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/>`_
-(or can in the future), and suppresses unrelated compiler warnings
-(e.g. "unused variable"). If the compiler thinks it is uninitialized,
-either simply initialize the variable or make compiler changes. Keep in
-mind that in most cases, if an initialization is obviously redundant,
-the compiler's dead-store elimination pass will make sure there are no
-needless variable writes.
-
-As Linus has said, this macro
-`must <https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/>`_
-`be <https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/>`_
-`removed <https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/>`_.
-
open-coded arithmetic in allocator arguments
--------------------------------------------
Dynamic size calculations (especially multiplication) should not be
@@ -322,7 +304,8 @@
In the example above, we had to remember to calculate ``count - 1`` when using
the struct_size() helper, otherwise we would have --unintentionally-- allocated
memory for one too many ``items`` objects. The cleanest and least error-prone way
-to implement this is through the use of a `flexible array member`::
+to implement this is through the use of a `flexible array member`, together with
+struct_size() and flex_array_size() helpers::
struct something {
size_t count;
@@ -334,5 +317,4 @@
instance = kmalloc(struct_size(instance, items, count), GFP_KERNEL);
instance->count = count;
- size = sizeof(instance->items[0]) * instance->count;
- memcpy(instance->items, source, size);
+ memcpy(instance->items, source, flex_array_size(instance, items, instance->count));
diff --git a/Documentation/process/email-clients.rst b/Documentation/process/email-clients.rst
index c9e4ce2..16586f6 100644
--- a/Documentation/process/email-clients.rst
+++ b/Documentation/process/email-clients.rst
@@ -25,6 +25,11 @@
it makes quoting portions of the patch more difficult in the patch
review process.
+It's also strongly recommended that you use plain text in your email body,
+for patches and other emails alike. https://useplaintext.email may be useful
+for information on how to configure your preferred email client, as well as
+listing recommended email clients should you not already have a preference.
+
Email clients that are used for Linux kernel patches should send the
patch text untouched. For example, they should not modify or delete tabs
or spaces, even at the beginning or end of lines.
diff --git a/Documentation/process/programming-language.rst b/Documentation/process/programming-language.rst
index e5f5f06..ec474a7 100644
--- a/Documentation/process/programming-language.rst
+++ b/Documentation/process/programming-language.rst
@@ -6,14 +6,15 @@
The kernel is written in the C programming language [c-language]_.
More precisely, the kernel is typically compiled with ``gcc`` [gcc]_
under ``-std=gnu89`` [gcc-c-dialect-options]_: the GNU dialect of ISO C90
-(including some C99 features).
+(including some C99 features). ``clang`` [clang]_ is also supported, see
+docs on :ref:`Building Linux with Clang/LLVM <kbuild_llvm>`.
This dialect contains many extensions to the language [gnu-extensions]_,
and many of them are used within the kernel as a matter of course.
-There is some support for compiling the kernel with ``clang`` [clang]_
-and ``icc`` [icc]_ for several of the architectures, although at the time
-of writing it is not completed, requiring third-party patches.
+There is some support for compiling the kernel with ``icc`` [icc]_ for several
+of the architectures, although at the time of writing it is not completed,
+requiring third-party patches.
Attributes
----------
diff --git a/Documentation/process/submit-checklist.rst b/Documentation/process/submit-checklist.rst
index 3f8e9d5..b681e862 100644
--- a/Documentation/process/submit-checklist.rst
+++ b/Documentation/process/submit-checklist.rst
@@ -24,6 +24,10 @@
c) Builds successfully when using ``O=builddir``
+ d) Any Documentation/ changes build successfully without new warnings/errors.
+ Use ``make htmldocs`` or ``make pdfdocs`` to check the build and
+ fix any issues.
+
3) Builds on multiple CPU architectures by using local cross-compile tools
or some other build farm.
diff --git a/Documentation/process/submitting-drivers.rst b/Documentation/process/submitting-drivers.rst
index 74b35bf..3861887 100644
--- a/Documentation/process/submitting-drivers.rst
+++ b/Documentation/process/submitting-drivers.rst
@@ -60,10 +60,11 @@
Licensing:
The code must be released to us under the
- GNU General Public License. We don't insist on any kind
- of exclusive GPL licensing, and if you wish the driver
- to be useful to other communities such as BSD you may well
- wish to release under multiple licenses.
+ GNU General Public License. If you wish the driver to be
+ useful to other communities such as BSD you may release
+ under multiple licenses. If you choose to release under
+ licenses other than the GPL, you should include your
+ rationale for your license choices in your cover letter.
See accepted licenses at include/linux/module.h
Copyright:
diff --git a/Documentation/process/submitting-patches.rst b/Documentation/process/submitting-patches.rst
index 5219bf3..58586ff 100644
--- a/Documentation/process/submitting-patches.rst
+++ b/Documentation/process/submitting-patches.rst
@@ -10,22 +10,18 @@
This document contains a large number of suggestions in a relatively terse
format. For detailed information on how the kernel development process
-works, see :ref:`Documentation/process <development_process_main>`.
-Also, read :ref:`Documentation/process/submit-checklist.rst <submitchecklist>`
-for a list of items to check before
-submitting code. If you are submitting a driver, also read
-:ref:`Documentation/process/submitting-drivers.rst <submittingdrivers>`;
-for device tree binding patches, read
-Documentation/devicetree/bindings/submitting-patches.rst.
+works, see :doc:`development-process`. Also, read :doc:`submit-checklist`
+for a list of items to check before submitting code. If you are submitting
+a driver, also read :doc:`submitting-drivers`; for device tree binding patches,
+read :doc:`submitting-patches`.
-Many of these steps describe the default behavior of the ``git`` version
-control system; if you use ``git`` to prepare your patches, you'll find much
-of the mechanical work done for you, though you'll still need to prepare
-and document a sensible set of patches. In general, use of ``git`` will make
-your life as a kernel developer easier.
+This documentation assumes that you're using ``git`` to prepare your patches.
+If you're unfamiliar with ``git``, you would be well-advised to learn how to
+use it, it will make your life as a kernel developer and in general much
+easier.
-0) Obtain a current source tree
--------------------------------
+Obtain a current source tree
+----------------------------
If you do not have a repository with the current kernel source handy, use
``git`` to obtain one. You'll want to start with the mainline repository,
@@ -39,68 +35,10 @@
in the MAINTAINERS file to find that tree, or simply ask the maintainer if
the tree is not listed there.
-It is still possible to download kernel releases via tarballs (as described
-in the next section), but that is the hard way to do kernel development.
-
-1) ``diff -up``
----------------
-
-If you must generate your patches by hand, use ``diff -up`` or ``diff -uprN``
-to create patches. Git generates patches in this form by default; if
-you're using ``git``, you can skip this section entirely.
-
-All changes to the Linux kernel occur in the form of patches, as
-generated by :manpage:`diff(1)`. When creating your patch, make sure to
-create it in "unified diff" format, as supplied by the ``-u`` argument
-to :manpage:`diff(1)`.
-Also, please use the ``-p`` argument which shows which C function each
-change is in - that makes the resultant ``diff`` a lot easier to read.
-Patches should be based in the root kernel source directory,
-not in any lower subdirectory.
-
-To create a patch for a single file, it is often sufficient to do::
-
- SRCTREE=linux
- MYFILE=drivers/net/mydriver.c
-
- cd $SRCTREE
- cp $MYFILE $MYFILE.orig
- vi $MYFILE # make your change
- cd ..
- diff -up $SRCTREE/$MYFILE{.orig,} > /tmp/patch
-
-To create a patch for multiple files, you should unpack a "vanilla",
-or unmodified kernel source tree, and generate a ``diff`` against your
-own source tree. For example::
-
- MYSRC=/devel/linux
-
- tar xvfz linux-3.19.tar.gz
- mv linux-3.19 linux-3.19-vanilla
- diff -uprN -X linux-3.19-vanilla/Documentation/dontdiff \
- linux-3.19-vanilla $MYSRC > /tmp/patch
-
-``dontdiff`` is a list of files which are generated by the kernel during
-the build process, and should be ignored in any :manpage:`diff(1)`-generated
-patch.
-
-Make sure your patch does not include any extra files which do not
-belong in a patch submission. Make sure to review your patch -after-
-generating it with :manpage:`diff(1)`, to ensure accuracy.
-
-If your changes produce a lot of deltas, you need to split them into
-individual patches which modify things in logical stages; see
-:ref:`split_changes`. This will facilitate review by other kernel developers,
-very important if you want your patch accepted.
-
-If you're using ``git``, ``git rebase -i`` can help you with this process. If
-you're not using ``git``, ``quilt`` <https://savannah.nongnu.org/projects/quilt>
-is another popular alternative.
-
.. _describe_changes:
-2) Describe your changes
-------------------------
+Describe your changes
+---------------------
Describe your problem. Whether your patch is a one-line bug fix or
5000 lines of a new feature, there must be an underlying problem that
@@ -203,8 +141,8 @@
.. _split_changes:
-3) Separate your changes
-------------------------
+Separate your changes
+---------------------
Separate each **logical change** into a separate patch.
@@ -236,8 +174,8 @@
-4) Style-check your changes
----------------------------
+Style-check your changes
+------------------------
Check your patch for basic style violations, details of which can be
found in
@@ -267,8 +205,8 @@
patch.
-5) Select the recipients for your patch
----------------------------------------
+Select the recipients for your patch
+------------------------------------
You should always copy the appropriate subsystem maintainer(s) on any patch
to code that they maintain; look through the MAINTAINERS file and the
@@ -299,7 +237,8 @@
If you have a patch that fixes an exploitable security bug, send that patch
to security@kernel.org. For severe bugs, a short embargo may be considered
to allow distributors to get the patch out to users; in such cases,
-obviously, the patch should not be sent to any public lists.
+obviously, the patch should not be sent to any public lists. See also
+:doc:`/admin-guide/security-bugs`.
Patches that fix a severe bug in a released kernel should be directed
toward the stable maintainers by putting a line like this::
@@ -342,15 +281,20 @@
-6) No MIME, no links, no compression, no attachments. Just plain text
-----------------------------------------------------------------------
+No MIME, no links, no compression, no attachments. Just plain text
+-------------------------------------------------------------------
Linus and other kernel developers need to be able to read and comment
on the changes you are submitting. It is important for a kernel
developer to be able to "quote" your changes, using standard e-mail
tools, so that they may comment on specific portions of your code.
-For this reason, all patches should be submitted by e-mail "inline".
+For this reason, all patches should be submitted by e-mail "inline". The
+easiest way to do this is with ``git send-email``, which is strongly
+recommended. An interactive tutorial for ``git send-email`` is available at
+https://git-send-email.io.
+
+If you choose not to use ``git send-email``:
.. warning::
@@ -366,27 +310,17 @@
Exception: If your mailer is mangling patches then someone may ask
you to re-send them using MIME.
-See :ref:`Documentation/process/email-clients.rst <email_clients>`
-for hints about configuring your e-mail client so that it sends your patches
-untouched.
+See :doc:`/process/email-clients` for hints about configuring your e-mail
+client so that it sends your patches untouched.
-7) E-mail size
---------------
-
-Large changes are not appropriate for mailing lists, and some
-maintainers. If your patch, uncompressed, exceeds 300 kB in size,
-it is preferred that you store your patch on an Internet-accessible
-server, and provide instead a URL (link) pointing to your patch. But note
-that if your patch exceeds 300 kB, it almost certainly needs to be broken up
-anyway.
-
-8) Respond to review comments
------------------------------
+Respond to review comments
+--------------------------
Your patch will almost certainly get comments from reviewers on ways in
-which the patch can be improved. You must respond to those comments;
-ignoring reviewers is a good way to get ignored in return. Review comments
-or questions that do not lead to a code change should almost certainly
+which the patch can be improved, in the form of a reply to your email. You must
+respond to those comments; ignoring reviewers is a good way to get ignored in
+return. You can simply reply to their emails to answer their comments. Review
+comments or questions that do not lead to a code change should almost certainly
bring about a comment or changelog entry so that the next reviewer better
understands what is going on.
@@ -395,9 +329,12 @@
reviewers sometimes get grumpy. Even in that case, though, respond
politely and address the problems they have pointed out.
+See :doc:`email-clients` for recommendations on email
+clients and mailing list etiquette.
-9) Don't get discouraged - or impatient
----------------------------------------
+
+Don't get discouraged - or impatient
+------------------------------------
After you have submitted your change, be patient and wait. Reviewers are
busy people and may not get to your patch right away.
@@ -410,18 +347,19 @@
busy times like merge windows.
-10) Include PATCH in the subject
---------------------------------
+Include PATCH in the subject
+-----------------------------
Due to high e-mail traffic to Linus, and to linux-kernel, it is common
convention to prefix your subject line with [PATCH]. This lets Linus
and other kernel developers more easily distinguish patches from other
e-mail discussions.
+``git send-email`` will do this for you automatically.
-11) Sign your work - the Developer's Certificate of Origin
-----------------------------------------------------------
+Sign your work - the Developer's Certificate of Origin
+------------------------------------------------------
To improve tracking of who did what, especially with patches that can
percolate to their final resting place in the kernel through several
@@ -465,60 +403,15 @@
Signed-off-by: Random J Developer <random@developer.example.org>
using your real name (sorry, no pseudonyms or anonymous contributions.)
+This will be done for you automatically if you use ``git commit -s``.
Some people also put extra tags at the end. They'll just be ignored for
now, but you can do this to mark internal company procedures or just
point out some special detail about the sign-off.
-If you are a subsystem or branch maintainer, sometimes you need to slightly
-modify patches you receive in order to merge them, because the code is not
-exactly the same in your tree and the submitters'. If you stick strictly to
-rule (c), you should ask the submitter to rediff, but this is a totally
-counter-productive waste of time and energy. Rule (b) allows you to adjust
-the code, but then it is very impolite to change one submitter's code and
-make him endorse your bugs. To solve this problem, it is recommended that
-you add a line between the last Signed-off-by header and yours, indicating
-the nature of your changes. While there is nothing mandatory about this, it
-seems like prepending the description with your mail and/or name, all
-enclosed in square brackets, is noticeable enough to make it obvious that
-you are responsible for last-minute changes. Example::
- Signed-off-by: Random J Developer <random@developer.example.org>
- [lucky@maintainer.example.org: struct foo moved from foo.c to foo.h]
- Signed-off-by: Lucky K Maintainer <lucky@maintainer.example.org>
-
-This practice is particularly helpful if you maintain a stable branch and
-want at the same time to credit the author, track changes, merge the fix,
-and protect the submitter from complaints. Note that under no circumstances
-can you change the author's identity (the From header), as it is the one
-which appears in the changelog.
-
-Special note to back-porters: It seems to be a common and useful practice
-to insert an indication of the origin of a patch at the top of the commit
-message (just after the subject line) to facilitate tracking. For instance,
-here's what we see in a 3.x-stable release::
-
- Date: Tue Oct 7 07:26:38 2014 -0400
-
- libata: Un-break ATA blacklist
-
- commit 1c40279960bcd7d52dbdf1d466b20d24b99176c8 upstream.
-
-And here's what might appear in an older kernel once a patch is backported::
-
- Date: Tue May 13 22:12:27 2008 +0200
-
- wireless, airo: waitbusy() won't delay
-
- [backport of 2.6 commit b7acbdfbd1f277c1eb23f344f899cfa4cd0bf36a]
-
-Whatever the format, this information provides a valuable help to people
-tracking your trees, and to people trying to troubleshoot bugs in your
-tree.
-
-
-12) When to use Acked-by:, Cc:, and Co-developed-by:
--------------------------------------------------------
+When to use Acked-by:, Cc:, and Co-developed-by:
+------------------------------------------------
The Signed-off-by: tag indicates that the signer was involved in the
development of the patch, or that he/she was in the patch's delivery path.
@@ -586,8 +479,8 @@
Signed-off-by: Submitting Co-Author <sub@coauthor.example.org>
-13) Using Reported-by:, Tested-by:, Reviewed-by:, Suggested-by: and Fixes:
---------------------------------------------------------------------------
+Using Reported-by:, Tested-by:, Reviewed-by:, Suggested-by: and Fixes:
+----------------------------------------------------------------------
The Reported-by tag gives credit to people who find bugs and report them and it
hopefully inspires them to help us again in the future. Please note that if
@@ -650,8 +543,8 @@
.. _the_canonical_patch_format:
-14) The canonical patch format
-------------------------------
+The canonical patch format
+--------------------------
This section describes how the patch itself should be formatted. Note
that, if you have your patches stored in a ``git`` repository, proper patch
@@ -773,8 +666,8 @@
.. _explicit_in_reply_to:
-15) Explicit In-Reply-To headers
---------------------------------
+Explicit In-Reply-To headers
+----------------------------
It can be helpful to manually add In-Reply-To: headers to a patch
(e.g., when using ``git send-email``) to associate the patch with
@@ -787,8 +680,8 @@
the cover email text) to link to an earlier version of the patch series.
-16) Providing base tree information
------------------------------------
+Providing base tree information
+-------------------------------
When other developers receive your patches and start the review process,
it is often useful for them to know where in the tree history they
@@ -838,61 +731,6 @@
content, right before your email signature.
-17) Sending ``git pull`` requests
----------------------------------
-
-If you have a series of patches, it may be most convenient to have the
-maintainer pull them directly into the subsystem repository with a
-``git pull`` operation. Note, however, that pulling patches from a developer
-requires a higher degree of trust than taking patches from a mailing list.
-As a result, many subsystem maintainers are reluctant to take pull
-requests, especially from new, unknown developers. If in doubt you can use
-the pull request as the cover letter for a normal posting of the patch
-series, giving the maintainer the option of using either.
-
-A pull request should have [GIT PULL] in the subject line. The
-request itself should include the repository name and the branch of
-interest on a single line; it should look something like::
-
- Please pull from
-
- git://jdelvare.pck.nerim.net/jdelvare-2.6 i2c-for-linus
-
- to get these changes:
-
-A pull request should also include an overall message saying what will be
-included in the request, a ``git shortlog`` listing of the patches
-themselves, and a ``diffstat`` showing the overall effect of the patch series.
-The easiest way to get all this information together is, of course, to let
-``git`` do it for you with the ``git request-pull`` command.
-
-Some maintainers (including Linus) want to see pull requests from signed
-commits; that increases their confidence that the request actually came
-from you. Linus, in particular, will not pull from public hosting sites
-like GitHub in the absence of a signed tag.
-
-The first step toward creating such tags is to make a GNUPG key and get it
-signed by one or more core kernel developers. This step can be hard for
-new developers, but there is no way around it. Attending conferences can
-be a good way to find developers who can sign your key.
-
-Once you have prepared a patch series in ``git`` that you wish to have somebody
-pull, create a signed tag with ``git tag -s``. This will create a new tag
-identifying the last commit in the series and containing a signature
-created with your private key. You will also have the opportunity to add a
-changelog-style message to the tag; this is an ideal place to describe the
-effects of the pull request as a whole.
-
-If the tree the maintainer will be pulling from is not the repository you
-are working from, don't forget to push the signed tag explicitly to the
-public tree.
-
-When generating your pull request, use the signed tag as the target. A
-command like this will do the trick::
-
- git request-pull master git://my.public.tree/linux.git my-signed-tag
-
-
References
----------
diff --git a/Documentation/scheduler/sched-capacity.rst b/Documentation/scheduler/sched-capacity.rst
index 00bf0d0..9b7cbe4 100644
--- a/Documentation/scheduler/sched-capacity.rst
+++ b/Documentation/scheduler/sched-capacity.rst
@@ -365,7 +365,7 @@
.. note::
Wakeup CPU selection in CFS can be eclipsed by Energy Aware Scheduling
- (EAS), which is described in Documentation/scheduling/sched-energy.rst.
+ (EAS), which is described in Documentation/scheduler/sched-energy.rst.
5.1.3 Load balancing
~~~~~~~~~~~~~~~~~~~~
diff --git a/Documentation/scheduler/sched-energy.rst b/Documentation/scheduler/sched-energy.rst
index 78f8507..001e09c 100644
--- a/Documentation/scheduler/sched-energy.rst
+++ b/Documentation/scheduler/sched-energy.rst
@@ -331,7 +331,7 @@
looking for the presence of the SD_ASYM_CPUCAPACITY flag when the scheduling
domains are built.
-See Documentation/sched/sched-capacity.rst for requirements to be met for this
+See Documentation/scheduler/sched-capacity.rst for requirements to be met for this
flag to be set in the sched_domain hierarchy.
Please note that EAS is not fundamentally incompatible with SMP, but no
diff --git a/Documentation/security/credentials.rst b/Documentation/security/credentials.rst
index d938720..357328d 100644
--- a/Documentation/security/credentials.rst
+++ b/Documentation/security/credentials.rst
@@ -323,7 +323,6 @@
uid_t current_fsuid(void) Current's file access UID
gid_t current_fsgid(void) Current's file access GID
kernel_cap_t current_cap(void) Current's effective capabilities
- void *current_security(void) Current's LSM security pointer
struct user_struct *current_user(void) Current's user account
There are also convenience wrappers for retrieving specific associated pairs of
diff --git a/Documentation/security/keys/trusted-encrypted.rst b/Documentation/security/keys/trusted-encrypted.rst
index 9483a74..1da879a 100644
--- a/Documentation/security/keys/trusted-encrypted.rst
+++ b/Documentation/security/keys/trusted-encrypted.rst
@@ -39,10 +39,9 @@
Or with the Intel TSS 2 stack::
- #> tpm2_createprimary --hierarchy o -G rsa2048 -o key.ctxt
+ #> tpm2_createprimary --hierarchy o -G rsa2048 -c key.ctxt
[...]
- handle: 0x800000FF
- #> tpm2_evictcontrol -c key.ctxt -p 0x81000001
+ #> tpm2_evictcontrol -c key.ctxt 0x81000001
persistentHandle: 0x81000001
Usage::
diff --git a/Documentation/sphinx/automarkup.py b/Documentation/sphinx/automarkup.py
index b182363..a1b0f55 100644
--- a/Documentation/sphinx/automarkup.py
+++ b/Documentation/sphinx/automarkup.py
@@ -13,6 +13,7 @@
else:
from sphinx.errors import NoUri
import re
+from itertools import chain
#
# Regex nastiness. Of course.
@@ -21,7 +22,13 @@
# :c:func: block (i.e. ":c:func:`mmap()`s" flakes out), so the last
# bit tries to restrict matches to things that won't create trouble.
#
-RE_function = re.compile(r'([\w_][\w\d_]+\(\))')
+RE_function = re.compile(r'(([\w_][\w\d_]+)\(\))')
+RE_type = re.compile(r'(struct|union|enum|typedef)\s+([\w_][\w\d_]+)')
+#
+# Detects a reference to a documentation page of the form Documentation/... with
+# an optional extension
+#
+RE_doc = re.compile(r'Documentation(/[\w\-_/]+)(\.\w+)*')
#
# Many places in the docs refer to common system calls. It is
@@ -34,56 +41,110 @@
'select', 'poll', 'fork', 'execve', 'clone', 'ioctl',
'socket' ]
-#
-# Find all occurrences of function() and try to replace them with
-# appropriate cross references.
-#
-def markup_funcs(docname, app, node):
- cdom = app.env.domains['c']
+def markup_refs(docname, app, node):
t = node.astext()
done = 0
repl = [ ]
- for m in RE_function.finditer(t):
+ #
+ # Associate each regex with the function that will markup its matches
+ #
+ markup_func = {RE_type: markup_c_ref,
+ RE_function: markup_c_ref,
+ RE_doc: markup_doc_ref}
+ match_iterators = [regex.finditer(t) for regex in markup_func]
+ #
+ # Sort all references by the starting position in text
+ #
+ sorted_matches = sorted(chain(*match_iterators), key=lambda m: m.start())
+ for m in sorted_matches:
#
- # Include any text prior to function() as a normal text node.
+ # Include any text prior to match as a normal text node.
#
if m.start() > done:
repl.append(nodes.Text(t[done:m.start()]))
+
#
- # Go through the dance of getting an xref out of the C domain
+ # Call the function associated with the regex that matched this text and
+ # append its return to the text
#
- target = m.group(1)[:-2]
- target_text = nodes.Text(target + '()')
- xref = None
- if target not in Skipfuncs:
- lit_text = nodes.literal(classes=['xref', 'c', 'c-func'])
- lit_text += target_text
- pxref = addnodes.pending_xref('', refdomain = 'c',
- reftype = 'function',
- reftarget = target, modname = None,
- classname = None)
- #
- # XXX The Latex builder will throw NoUri exceptions here,
- # work around that by ignoring them.
- #
- try:
- xref = cdom.resolve_xref(app.env, docname, app.builder,
- 'function', target, pxref, lit_text)
- except NoUri:
- xref = None
- #
- # Toss the xref into the list if we got it; otherwise just put
- # the function text.
- #
- if xref:
- repl.append(xref)
- else:
- repl.append(target_text)
+ repl.append(markup_func[m.re](docname, app, m))
+
done = m.end()
if done < len(t):
repl.append(nodes.Text(t[done:]))
return repl
+#
+# Try to replace a C reference (function() or struct/union/enum/typedef
+# type_name) with an appropriate cross reference.
+#
+def markup_c_ref(docname, app, match):
+ class_str = {RE_function: 'c-func', RE_type: 'c-type'}
+ reftype_str = {RE_function: 'function', RE_type: 'type'}
+
+ cdom = app.env.domains['c']
+ #
+ # Go through the dance of getting an xref out of the C domain
+ #
+ target = match.group(2)
+ target_text = nodes.Text(match.group(0))
+ xref = None
+ if not (match.re == RE_function and target in Skipfuncs):
+ lit_text = nodes.literal(classes=['xref', 'c', class_str[match.re]])
+ lit_text += target_text
+ pxref = addnodes.pending_xref('', refdomain = 'c',
+ reftype = reftype_str[match.re],
+ reftarget = target, modname = None,
+ classname = None)
+ #
+ # XXX The Latex builder will throw NoUri exceptions here,
+ # work around that by ignoring them.
+ #
+ try:
+ xref = cdom.resolve_xref(app.env, docname, app.builder,
+ reftype_str[match.re], target, pxref,
+ lit_text)
+ except NoUri:
+ xref = None
+ #
+ # Return the xref if we got it; otherwise just return the plain text.
+ #
+ if xref:
+ return xref
+ else:
+ return target_text
+
+#
+# Try to replace a documentation reference of the form Documentation/... with a
+# cross reference to that page
+#
+def markup_doc_ref(docname, app, match):
+ stddom = app.env.domains['std']
+ #
+ # Go through the dance of getting an xref out of the std domain
+ #
+ target = match.group(1)
+ xref = None
+ pxref = addnodes.pending_xref('', refdomain = 'std', reftype = 'doc',
+ reftarget = target, modname = None,
+ classname = None, refexplicit = False)
+ #
+ # XXX The Latex builder will throw NoUri exceptions here,
+ # work around that by ignoring them.
+ #
+ try:
+ xref = stddom.resolve_xref(app.env, docname, app.builder, 'doc',
+ target, pxref, None)
+ except NoUri:
+ xref = None
+ #
+ # Return the xref if we got it; otherwise just return the plain text.
+ #
+ if xref:
+ return xref
+ else:
+ return nodes.Text(match.group(0))
+
def auto_markup(app, doctree, name):
#
# This loop could eventually be improved on. Someday maybe we
@@ -97,7 +158,7 @@
for para in doctree.traverse(nodes.paragraph):
for node in para.traverse(nodes.Text):
if not isinstance(node.parent, nodes.literal):
- node.parent.replace(node, markup_funcs(name, app, node))
+ node.parent.replace(node, markup_refs(name, app, node))
def setup(app):
app.connect('doctree-resolved', auto_markup)
diff --git a/Documentation/trace/kprobetrace.rst b/Documentation/trace/kprobetrace.rst
index c170916..10850a9 100644
--- a/Documentation/trace/kprobetrace.rst
+++ b/Documentation/trace/kprobetrace.rst
@@ -40,7 +40,7 @@
MEMADDR : Address where the probe is inserted.
MAXACTIVE : Maximum number of instances of the specified function that
can be probed simultaneously, or 0 for the default value
- as defined in Documentation/staging/kprobes.rst section 1.3.1.
+ as defined in Documentation/trace/kprobes.rst section 1.3.1.
FETCHARGS : Arguments. Each probe can have up to 128 args.
%REG : Fetch register REG
diff --git a/Documentation/trace/ring-buffer-design.rst b/Documentation/trace/ring-buffer-design.rst
index 9c8d22a..c5d77fc 100644
--- a/Documentation/trace/ring-buffer-design.rst
+++ b/Documentation/trace/ring-buffer-design.rst
@@ -1,28 +1,4 @@
-.. This file is dual-licensed: you can use it either under the terms
-.. of the GPL 2.0 or the GFDL 1.2 license, at your option. Note that this
-.. dual licensing only applies to this file, and not this project as a
-.. whole.
-..
-.. a) This file is free software; you can redistribute it and/or
-.. modify it under the terms of the GNU General Public License as
-.. published by the Free Software Foundation version 2 of
-.. the License.
-..
-.. This file is distributed in the hope that it will be useful,
-.. but WITHOUT ANY WARRANTY; without even the implied warranty of
-.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-.. GNU General Public License for more details.
-..
-.. Or, alternatively,
-..
-.. b) Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.2 version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GPL-2.0 OR GFDL-1.2 WITH no-invariant-sections
+.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.2-no-invariants-only
===========================
Lockless Ring Buffer Design
diff --git a/Documentation/translations/ko_KR/howto.rst b/Documentation/translations/ko_KR/howto.rst
index 71d4823..240d29b 100644
--- a/Documentation/translations/ko_KR/howto.rst
+++ b/Documentation/translations/ko_KR/howto.rst
@@ -284,9 +284,10 @@
여러 메이저 넘버를 갖는 다양한 안정된 커널 트리들
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-3 자리 숫자로 이루어진 버젼의 커널들은 -stable 커널들이다. 그것들은 해당 메이저
-메인라인 릴리즈에서 발견된 큰 회귀들이나 보안 문제들 중 비교적 작고 중요한
-수정들을 포함하며, 앞의 두 버전 넘버는 같은 기반 버전을 의미한다.
+세개의 버젼 넘버로 이루어진 버젼의 커널들은 -stable 커널들이다. 그것들은 해당
+메이저 메인라인 릴리즈에서 발견된 큰 회귀들이나 보안 문제들 중 비교적 작고
+중요한 수정들을 포함한다. 주요 stable 시리즈 릴리즈는 세번째 버젼 넘버를
+증가시키며 앞의 두 버젼 넘버는 그대로 유지한다.
이것은 가장 최근의 안정적인 커널을 원하는 사용자에게 추천되는 브랜치이며,
개발/실험적 버젼을 테스트하는 것을 돕고자 하는 사용자들과는 별로 관련이 없다.
@@ -316,7 +317,7 @@
제안된 패치는 서브시스템 트리에 커밋되기 전에 메일링 리스트를 통해
리뷰된다(아래의 관련 섹션을 참고하기 바란다). 일부 커널 서브시스템의 경우, 이
리뷰 프로세스는 patchwork라는 도구를 통해 추적된다. patchwork은 등록된 패치와
-패치에 대한 코멘트, 패치의 버전을 볼 수 있는 웹 인터페이스를 제공하고,
+패치에 대한 코멘트, 패치의 버젼을 볼 수 있는 웹 인터페이스를 제공하고,
메인테이너는 패치를 리뷰 중, 리뷰 통과, 또는 반려됨으로 표시할 수 있다.
대부분의 이러한 patchwork 사이트는 https://patchwork.kernel.org/ 에 나열되어
있다.
diff --git a/Documentation/translations/ko_KR/memory-barriers.txt b/Documentation/translations/ko_KR/memory-barriers.txt
index 9dcc7c9..64d932f 100644
--- a/Documentation/translations/ko_KR/memory-barriers.txt
+++ b/Documentation/translations/ko_KR/memory-barriers.txt
@@ -91,7 +91,6 @@
- 컴파일러 배리어.
- CPU 메모리 배리어.
- - MMIO 쓰기 배리어.
(*) 암묵적 커널 메모리 배리어.
@@ -103,7 +102,6 @@
(*) CPU 간 ACQUIRING 배리어의 효과.
- Acquire vs 메모리 액세스.
- - Acquire vs I/O 액세스.
(*) 메모리 배리어가 필요한 곳
@@ -515,14 +513,13 @@
완료되기 전에 행해진 것처럼 보일 수 있습니다.
ACQUIRE 와 RELEASE 오퍼레이션의 사용은 일반적으로 다른 메모리 배리어의
- 필요성을 없앱니다 (하지만 "MMIO 쓰기 배리어" 서브섹션에서 설명되는 예외를
- 알아두세요). 또한, RELEASE+ACQUIRE 조합은 범용 메모리 배리어처럼 동작할
- 것을 보장하지 -않습니다-. 하지만, 어떤 변수에 대한 RELEASE 오퍼레이션을
- 앞서는 메모리 액세스들의 수행 결과는 이 RELEASE 오퍼레이션을 뒤이어 같은
- 변수에 대해 수행된 ACQUIRE 오퍼레이션을 뒤따르는 메모리 액세스에는 보여질
- 것이 보장됩니다. 다르게 말하자면, 주어진 변수의 크리티컬 섹션에서는, 해당
- 변수에 대한 앞의 크리티컬 섹션에서의 모든 액세스들이 완료되었을 것을
- 보장합니다.
+ 필요성을 없앱니다. 또한, RELEASE+ACQUIRE 조합은 범용 메모리 배리어처럼
+ 동작할 것을 보장하지 -않습니다-. 하지만, 어떤 변수에 대한 RELEASE
+ 오퍼레이션을 앞서는 메모리 액세스들의 수행 결과는 이 RELEASE 오퍼레이션을
+ 뒤이어 같은 변수에 대해 수행된 ACQUIRE 오퍼레이션을 뒤따르는 메모리
+ 액세스에는 보여질 것이 보장됩니다. 다르게 말하자면, 주어진 변수의
+ 크리티컬 섹션에서는, 해당 변수에 대한 앞의 크리티컬 섹션에서의 모든
+ 액세스들이 완료되었을 것을 보장합니다.
즉, ACQUIRE 는 최소한의 "취득" 동작처럼, 그리고 RELEASE 는 최소한의 "공개"
처럼 동작한다는 의미입니다.
@@ -1501,8 +1498,6 @@
(*) CPU 메모리 배리어.
- (*) MMIO 쓰기 배리어.
-
컴파일러 배리어
---------------
@@ -1909,6 +1904,19 @@
"커널 I/O 배리어의 효과" 섹션을, consistent memory 에 대한 자세한 내용을
위해선 Documentation/core-api/dma-api.rst 문서를 참고하세요.
+ (*) pmem_wmb();
+
+ 이것은 persistent memory 를 위한 것으로, persistent 저장소에 가해진 변경
+ 사항이 플랫폼 연속성 도메인에 도달했을 것을 보장하기 위한 것입니다.
+
+ 예를 들어, 임시적이지 않은 pmem 영역으로의 쓰기 후, 우리는 쓰기가 플랫폼
+ 연속성 도메인에 도달했을 것을 보장하기 위해 pmem_wmb() 를 사용합니다.
+ 이는 쓰기가 뒤따르는 instruction 들이 유발하는 어떠한 데이터 액세스나
+ 데이터 전송의 시작 전에 persistent 저장소를 업데이트 했을 것을 보장합니다.
+ 이는 wmb() 에 의해 이뤄지는 순서 규칙을 포함합니다.
+
+ Persistent memory 에서의 로드를 위해선 현재의 읽기 메모리 배리어로도 읽기
+ 순서를 보장하는데 충분합니다.
=========================
암묵적 커널 메모리 배리어
diff --git a/Documentation/translations/zh_CN/arm64/amu.rst b/Documentation/translations/zh_CN/arm64/amu.rst
new file mode 100644
index 0000000..bd875f2
--- /dev/null
+++ b/Documentation/translations/zh_CN/arm64/amu.rst
@@ -0,0 +1,100 @@
+.. include:: ../disclaimer-zh_CN.rst
+
+:Original: :ref:`Documentation/arm64/amu.rst <amu_index>`
+
+Translator: Bailu Lin <bailu.lin@vivo.com>
+
+=================================
+AArch64 Linux 中扩展的活动监控单元
+=================================
+
+作者: Ionela Voinescu <ionela.voinescu@arm.com>
+
+日期: 2019-09-10
+
+本文档简要描述了 AArch64 Linux 支持的活动监控单元的规范。
+
+
+架构总述
+--------
+
+活动监控是 ARMv8.4 CPU 架构引入的一个可选扩展特性。
+
+活动监控单元(在每个 CPU 中实现)为系统管理提供了性能计数器。既可以通
+过系统寄存器的方式访问计数器，同时也支持外部内存映射的方式访问计数器。
+
+AMUv1 架构实现了一个由4个固定的64位事件计数器组成的计数器组。
+
+ - CPU 周期计数器：同 CPU 的频率增长
+ - 常量计数器：同固定的系统时钟频率增长
+ - 淘汰指令计数器: 同每次架构指令执行增长
+ - 内存停顿周期计数器：计算由在时钟域内的最后一级缓存中未命中而引起
+ 的指令调度停顿周期数
+
+当处于 WFI 或者 WFE 状态时，计数器不会增长。
+
+AMU 架构提供了一个高达16位的事件计数器空间，未来新的 AMU 版本中可能
+用它来实现新增的事件计数器。
+
+另外，AMUv1 实现了一个多达16个64位辅助事件计数器的计数器组。
+
+冷复位时所有的计数器会清零。
+
+
+基本支持
+--------
+
+内核可以安全地运行在支持 AMU 和不支持 AMU 的 CPU 组合中。
+因此，当配置 CONFIG_ARM64_AMU_EXTN 后我们无条件使能后续
+(secondary or hotplugged) CPU 检测和使用这个特性。
+
+当在 CPU 上检测到该特性时，我们会标记为特性可用但是不能保证计数器的功能，
+仅表明有扩展属性。
+
+固件(代码运行在高异常级别，例如 arm-tf )需支持以下功能：
+
+ - 提供低异常级别(EL2 和 EL1)访问 AMU 寄存器的能力。
+ - 使能计数器。如果未使能，它的值应为 0。
+ - 在从电源关闭状态启动 CPU 前或后保存或者恢复计数器。
+
+当使用使能了该特性的内核启动但固件损坏时，访问计数器寄存器可能会遭遇
+panic 或者死锁。即使未发现这些症状，计数器寄存器返回的数据结果并不一
+定能反映真实情况。通常，计数器会返回 0，表明他们未被使能。
+
+如果固件没有提供适当的支持最好关闭 CONFIG_ARM64_AMU_EXTN。
+值得注意的是，出于安全原因，不要绕过 AMUSERRENR_EL0 设置而捕获从
+EL0(用户空间) 访问 EL1(内核空间)。 因此，固件应该确保访问 AMU寄存器
+不会困在 EL2或EL3。
+
+AMUv1 的固定计数器可以通过如下系统寄存器访问：
+
+ - SYS_AMEVCNTR0_CORE_EL0
+ - SYS_AMEVCNTR0_CONST_EL0
+ - SYS_AMEVCNTR0_INST_RET_EL0
+ - SYS_AMEVCNTR0_MEM_STALL_EL0
+
+特定辅助计数器可以通过 SYS_AMEVCNTR1_EL0(n) 访问，其中n介于0到15。
+
+详细信息定义在目录：arch/arm64/include/asm/sysreg.h。
+
+
+用户空间访问
+------------
+
+由于以下原因，当前禁止从用户空间访问 AMU 的寄存器：
+
+ - 安全因数：可能会暴露处于安全模式执行的代码信息。
+ - 意愿：AMU 是用于系统管理的。
+
+同样，该功能对用户空间不可见。
+
+
+虚拟化
+------
+
+由于以下原因，当前禁止从 KVM 客户端的用户空间(EL0)和内核空间(EL1)
+访问 AMU 的寄存器：
+
+ - 安全因数：可能会暴露给其他客户端或主机端执行的代码信息。
+
+任何试图访问 AMU 寄存器的行为都会触发一个注册在客户端的未定义异常。
diff --git a/Documentation/translations/zh_CN/arm64/index.rst b/Documentation/translations/zh_CN/arm64/index.rst
new file mode 100644
index 0000000..646ed1f
--- /dev/null
+++ b/Documentation/translations/zh_CN/arm64/index.rst
@@ -0,0 +1,16 @@
+.. include:: ../disclaimer-zh_CN.rst
+
+:Original: :ref:`Documentation/arm64/index.rst <arm64_index>`
+:Translator: Bailu Lin <bailu.lin@vivo.com>
+
+.. _cn_arm64_index:
+
+
+==========
+ARM64 架构
+==========
+
+.. toctree::
+ :maxdepth: 2
+
+ amu
diff --git a/Documentation/translations/zh_CN/filesystems/sysfs.txt b/Documentation/translations/zh_CN/filesystems/sysfs.txt
index 9481e3e..046cc1d 100644
--- a/Documentation/translations/zh_CN/filesystems/sysfs.txt
+++ b/Documentation/translations/zh_CN/filesystems/sysfs.txt
@@ -154,14 +154,13 @@
示例:
-#define to_dev(obj) container_of(obj, struct device, kobj)
#define to_dev_attr(_attr) container_of(_attr, struct device_attribute, attr)
static ssize_t dev_attr_show(struct kobject *kobj, struct attribute *attr,
char *buf)
{
struct device_attribute *dev_attr = to_dev_attr(attr);
- struct device *dev = to_dev(kobj);
+ struct device *dev = kobj_to_dev(kobj);
ssize_t ret = -EIO;
if (dev_attr->show)
diff --git a/Documentation/translations/zh_CN/index.rst b/Documentation/translations/zh_CN/index.rst
index 85643e4..be6f111 100644
--- a/Documentation/translations/zh_CN/index.rst
+++ b/Documentation/translations/zh_CN/index.rst
@@ -19,6 +19,7 @@
admin-guide/index
process/index
filesystems/index
+ arm64/index
目录和表格
----------
diff --git a/Documentation/userspace-api/media/cec/cec-api.rst b/Documentation/userspace-api/media/cec/cec-api.rst
index 871db54..4d229ed 100644
--- a/Documentation/userspace-api/media/cec/cec-api.rst
+++ b/Documentation/userspace-api/media/cec/cec-api.rst
@@ -1,12 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. include:: <isonum.txt>
.. _cec:
diff --git a/Documentation/userspace-api/media/cec/cec-func-close.rst b/Documentation/userspace-api/media/cec/cec-func-close.rst
index b89e06a..33c563f 100644
--- a/Documentation/userspace-api/media/cec/cec-func-close.rst
+++ b/Documentation/userspace-api/media/cec/cec-func-close.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _cec-func-close:
diff --git a/Documentation/userspace-api/media/cec/cec-func-ioctl.rst b/Documentation/userspace-api/media/cec/cec-func-ioctl.rst
index d16a479..3b88230 100644
--- a/Documentation/userspace-api/media/cec/cec-func-ioctl.rst
+++ b/Documentation/userspace-api/media/cec/cec-func-ioctl.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _cec-func-ioctl:
diff --git a/Documentation/userspace-api/media/cec/cec-func-open.rst b/Documentation/userspace-api/media/cec/cec-func-open.rst
index 67fd021..887bfd2 100644
--- a/Documentation/userspace-api/media/cec/cec-func-open.rst
+++ b/Documentation/userspace-api/media/cec/cec-func-open.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _cec-func-open:
diff --git a/Documentation/userspace-api/media/cec/cec-func-poll.rst b/Documentation/userspace-api/media/cec/cec-func-poll.rst
index ed3652d..2d87136 100644
--- a/Documentation/userspace-api/media/cec/cec-func-poll.rst
+++ b/Documentation/userspace-api/media/cec/cec-func-poll.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _cec-func-poll:
diff --git a/Documentation/userspace-api/media/cec/cec-funcs.rst b/Documentation/userspace-api/media/cec/cec-funcs.rst
index 88966b5..aa6b790 100644
--- a/Documentation/userspace-api/media/cec/cec-funcs.rst
+++ b/Documentation/userspace-api/media/cec/cec-funcs.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _cec-user-func:
diff --git a/Documentation/userspace-api/media/cec/cec-header.rst b/Documentation/userspace-api/media/cec/cec-header.rst
index 24a83b0..d70736a 100644
--- a/Documentation/userspace-api/media/cec/cec-header.rst
+++ b/Documentation/userspace-api/media/cec/cec-header.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _cec_header:
diff --git a/Documentation/userspace-api/media/cec/cec-intro.rst b/Documentation/userspace-api/media/cec/cec-intro.rst
index a4db823..1884ea0 100644
--- a/Documentation/userspace-api/media/cec/cec-intro.rst
+++ b/Documentation/userspace-api/media/cec/cec-intro.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _cec-intro:
diff --git a/Documentation/userspace-api/media/cec/cec-ioc-adap-g-caps.rst b/Documentation/userspace-api/media/cec/cec-ioc-adap-g-caps.rst
index 436a882..7f25365 100644
--- a/Documentation/userspace-api/media/cec/cec-ioc-adap-g-caps.rst
+++ b/Documentation/userspace-api/media/cec/cec-ioc-adap-g-caps.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _CEC_ADAP_G_CAPS:
diff --git a/Documentation/userspace-api/media/cec/cec-ioc-adap-g-log-addrs.rst b/Documentation/userspace-api/media/cec/cec-ioc-adap-g-log-addrs.rst
index 8ba3511..1ca8932 100644
--- a/Documentation/userspace-api/media/cec/cec-ioc-adap-g-log-addrs.rst
+++ b/Documentation/userspace-api/media/cec/cec-ioc-adap-g-log-addrs.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _CEC_ADAP_LOG_ADDRS:
.. _CEC_ADAP_G_LOG_ADDRS:
diff --git a/Documentation/userspace-api/media/cec/cec-ioc-adap-g-phys-addr.rst b/Documentation/userspace-api/media/cec/cec-ioc-adap-g-phys-addr.rst
index ce8f64c..a10443b 100644
--- a/Documentation/userspace-api/media/cec/cec-ioc-adap-g-phys-addr.rst
+++ b/Documentation/userspace-api/media/cec/cec-ioc-adap-g-phys-addr.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _CEC_ADAP_PHYS_ADDR:
.. _CEC_ADAP_G_PHYS_ADDR:
diff --git a/Documentation/userspace-api/media/cec/cec-ioc-dqevent.rst b/Documentation/userspace-api/media/cec/cec-ioc-dqevent.rst
index 4a535fb..3bc81fc 100644
--- a/Documentation/userspace-api/media/cec/cec-ioc-dqevent.rst
+++ b/Documentation/userspace-api/media/cec/cec-ioc-dqevent.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _CEC_DQEVENT:
diff --git a/Documentation/userspace-api/media/cec/cec-ioc-g-mode.rst b/Documentation/userspace-api/media/cec/cec-ioc-g-mode.rst
index 2d3227e..2093e37 100644
--- a/Documentation/userspace-api/media/cec/cec-ioc-g-mode.rst
+++ b/Documentation/userspace-api/media/cec/cec-ioc-g-mode.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _CEC_MODE:
.. _CEC_G_MODE:
diff --git a/Documentation/userspace-api/media/cec/cec-ioc-receive.rst b/Documentation/userspace-api/media/cec/cec-ioc-receive.rst
index e456b2b..9d629d4 100644
--- a/Documentation/userspace-api/media/cec/cec-ioc-receive.rst
+++ b/Documentation/userspace-api/media/cec/cec-ioc-receive.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _CEC_TRANSMIT:
.. _CEC_RECEIVE:
diff --git a/Documentation/userspace-api/media/cec/cec-pin-error-inj.rst b/Documentation/userspace-api/media/cec/cec-pin-error-inj.rst
index 7863219..064c8c5 100644
--- a/Documentation/userspace-api/media/cec/cec-pin-error-inj.rst
+++ b/Documentation/userspace-api/media/cec/cec-pin-error-inj.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
CEC Pin Framework Error Injection
=================================
diff --git a/Documentation/userspace-api/media/dvb/audio-bilingual-channel-select.rst b/Documentation/userspace-api/media/dvb/audio-bilingual-channel-select.rst
index 6841233..ba4f48b 100644
--- a/Documentation/userspace-api/media/dvb/audio-bilingual-channel-select.rst
+++ b/Documentation/userspace-api/media/dvb/audio-bilingual-channel-select.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _AUDIO_BILINGUAL_CHANNEL_SELECT:
diff --git a/Documentation/userspace-api/media/dvb/audio-channel-select.rst b/Documentation/userspace-api/media/dvb/audio-channel-select.rst
index 18e880e7..ba83b63 100644
--- a/Documentation/userspace-api/media/dvb/audio-channel-select.rst
+++ b/Documentation/userspace-api/media/dvb/audio-channel-select.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _AUDIO_CHANNEL_SELECT:
diff --git a/Documentation/userspace-api/media/dvb/audio-clear-buffer.rst b/Documentation/userspace-api/media/dvb/audio-clear-buffer.rst
index 19f2ed7..7035a40 100644
--- a/Documentation/userspace-api/media/dvb/audio-clear-buffer.rst
+++ b/Documentation/userspace-api/media/dvb/audio-clear-buffer.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _AUDIO_CLEAR_BUFFER:
diff --git a/Documentation/userspace-api/media/dvb/audio-continue.rst b/Documentation/userspace-api/media/dvb/audio-continue.rst
index b9a2b1e..c8d514a 100644
--- a/Documentation/userspace-api/media/dvb/audio-continue.rst
+++ b/Documentation/userspace-api/media/dvb/audio-continue.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _AUDIO_CONTINUE:
diff --git a/Documentation/userspace-api/media/dvb/audio-fclose.rst b/Documentation/userspace-api/media/dvb/audio-fclose.rst
index 448471d..c968177 100644
--- a/Documentation/userspace-api/media/dvb/audio-fclose.rst
+++ b/Documentation/userspace-api/media/dvb/audio-fclose.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _audio_fclose:
diff --git a/Documentation/userspace-api/media/dvb/audio-fopen.rst b/Documentation/userspace-api/media/dvb/audio-fopen.rst
index f7ae943..d34001e 100644
--- a/Documentation/userspace-api/media/dvb/audio-fopen.rst
+++ b/Documentation/userspace-api/media/dvb/audio-fopen.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _audio_fopen:
diff --git a/Documentation/userspace-api/media/dvb/audio-fwrite.rst b/Documentation/userspace-api/media/dvb/audio-fwrite.rst
index 1482636..d17ec71 100644
--- a/Documentation/userspace-api/media/dvb/audio-fwrite.rst
+++ b/Documentation/userspace-api/media/dvb/audio-fwrite.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _audio_fwrite:
diff --git a/Documentation/userspace-api/media/dvb/audio-get-capabilities.rst b/Documentation/userspace-api/media/dvb/audio-get-capabilities.rst
index 4e70d82..33907e4 100644
--- a/Documentation/userspace-api/media/dvb/audio-get-capabilities.rst
+++ b/Documentation/userspace-api/media/dvb/audio-get-capabilities.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _AUDIO_GET_CAPABILITIES:
diff --git a/Documentation/userspace-api/media/dvb/audio-get-status.rst b/Documentation/userspace-api/media/dvb/audio-get-status.rst
index 5a5180d..4213d07 100644
--- a/Documentation/userspace-api/media/dvb/audio-get-status.rst
+++ b/Documentation/userspace-api/media/dvb/audio-get-status.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _AUDIO_GET_STATUS:
diff --git a/Documentation/userspace-api/media/dvb/audio-pause.rst b/Documentation/userspace-api/media/dvb/audio-pause.rst
index 3e9fe06..2de74f1 100644
--- a/Documentation/userspace-api/media/dvb/audio-pause.rst
+++ b/Documentation/userspace-api/media/dvb/audio-pause.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _AUDIO_PAUSE:
diff --git a/Documentation/userspace-api/media/dvb/audio-play.rst b/Documentation/userspace-api/media/dvb/audio-play.rst
index 388a581..d4e4eac 100644
--- a/Documentation/userspace-api/media/dvb/audio-play.rst
+++ b/Documentation/userspace-api/media/dvb/audio-play.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _AUDIO_PLAY:
diff --git a/Documentation/userspace-api/media/dvb/audio-select-source.rst b/Documentation/userspace-api/media/dvb/audio-select-source.rst
index 1ce6450..fb09f914 100644
--- a/Documentation/userspace-api/media/dvb/audio-select-source.rst
+++ b/Documentation/userspace-api/media/dvb/audio-select-source.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _AUDIO_SELECT_SOURCE:
diff --git a/Documentation/userspace-api/media/dvb/audio-set-av-sync.rst b/Documentation/userspace-api/media/dvb/audio-set-av-sync.rst
index 3a0400d..5bcb9b1 100644
--- a/Documentation/userspace-api/media/dvb/audio-set-av-sync.rst
+++ b/Documentation/userspace-api/media/dvb/audio-set-av-sync.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _AUDIO_SET_AV_SYNC:
diff --git a/Documentation/userspace-api/media/dvb/audio-set-bypass-mode.rst b/Documentation/userspace-api/media/dvb/audio-set-bypass-mode.rst
index 0d2f23c..f24a18b 100644
--- a/Documentation/userspace-api/media/dvb/audio-set-bypass-mode.rst
+++ b/Documentation/userspace-api/media/dvb/audio-set-bypass-mode.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _AUDIO_SET_BYPASS_MODE:
diff --git a/Documentation/userspace-api/media/dvb/audio-set-id.rst b/Documentation/userspace-api/media/dvb/audio-set-id.rst
index 83fc121..0227e10 100644
--- a/Documentation/userspace-api/media/dvb/audio-set-id.rst
+++ b/Documentation/userspace-api/media/dvb/audio-set-id.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _AUDIO_SET_ID:
diff --git a/Documentation/userspace-api/media/dvb/audio-set-mixer.rst b/Documentation/userspace-api/media/dvb/audio-set-mixer.rst
index 52bfc3a..58f18cf 100644
--- a/Documentation/userspace-api/media/dvb/audio-set-mixer.rst
+++ b/Documentation/userspace-api/media/dvb/audio-set-mixer.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _AUDIO_SET_MIXER:
diff --git a/Documentation/userspace-api/media/dvb/audio-set-mute.rst b/Documentation/userspace-api/media/dvb/audio-set-mute.rst
index 8f3a833..7ea7d86 100644
--- a/Documentation/userspace-api/media/dvb/audio-set-mute.rst
+++ b/Documentation/userspace-api/media/dvb/audio-set-mute.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _AUDIO_SET_MUTE:
diff --git a/Documentation/userspace-api/media/dvb/audio-set-streamtype.rst b/Documentation/userspace-api/media/dvb/audio-set-streamtype.rst
index c22bd24..d9f4924 100644
--- a/Documentation/userspace-api/media/dvb/audio-set-streamtype.rst
+++ b/Documentation/userspace-api/media/dvb/audio-set-streamtype.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _AUDIO_SET_STREAMTYPE:
diff --git a/Documentation/userspace-api/media/dvb/audio-stop.rst b/Documentation/userspace-api/media/dvb/audio-stop.rst
index 291b6a4..3a2bc32 100644
--- a/Documentation/userspace-api/media/dvb/audio-stop.rst
+++ b/Documentation/userspace-api/media/dvb/audio-stop.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _AUDIO_STOP:
diff --git a/Documentation/userspace-api/media/dvb/audio.rst b/Documentation/userspace-api/media/dvb/audio.rst
index e137c15..071abac 100644
--- a/Documentation/userspace-api/media/dvb/audio.rst
+++ b/Documentation/userspace-api/media/dvb/audio.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _dvb_audio:
diff --git a/Documentation/userspace-api/media/dvb/audio_data_types.rst b/Documentation/userspace-api/media/dvb/audio_data_types.rst
index effe265..4744529 100644
--- a/Documentation/userspace-api/media/dvb/audio_data_types.rst
+++ b/Documentation/userspace-api/media/dvb/audio_data_types.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _audio_data_types:
diff --git a/Documentation/userspace-api/media/dvb/audio_function_calls.rst b/Documentation/userspace-api/media/dvb/audio_function_calls.rst
index be90a82..fa5ba95 100644
--- a/Documentation/userspace-api/media/dvb/audio_function_calls.rst
+++ b/Documentation/userspace-api/media/dvb/audio_function_calls.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _audio_function_calls:
diff --git a/Documentation/userspace-api/media/dvb/ca-fclose.rst b/Documentation/userspace-api/media/dvb/ca-fclose.rst
index cedfb7e..00379ee 100644
--- a/Documentation/userspace-api/media/dvb/ca-fclose.rst
+++ b/Documentation/userspace-api/media/dvb/ca-fclose.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _ca_fclose:
diff --git a/Documentation/userspace-api/media/dvb/ca-fopen.rst b/Documentation/userspace-api/media/dvb/ca-fopen.rst
index aa0fde1..9ca4bd1 100644
--- a/Documentation/userspace-api/media/dvb/ca-fopen.rst
+++ b/Documentation/userspace-api/media/dvb/ca-fopen.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _ca_fopen:
diff --git a/Documentation/userspace-api/media/dvb/ca-get-cap.rst b/Documentation/userspace-api/media/dvb/ca-get-cap.rst
index b808d05..93742a5 100644
--- a/Documentation/userspace-api/media/dvb/ca-get-cap.rst
+++ b/Documentation/userspace-api/media/dvb/ca-get-cap.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _CA_GET_CAP:
diff --git a/Documentation/userspace-api/media/dvb/ca-get-descr-info.rst b/Documentation/userspace-api/media/dvb/ca-get-descr-info.rst
index 396cc66..be7dec0 100644
--- a/Documentation/userspace-api/media/dvb/ca-get-descr-info.rst
+++ b/Documentation/userspace-api/media/dvb/ca-get-descr-info.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _CA_GET_DESCR_INFO:
diff --git a/Documentation/userspace-api/media/dvb/ca-get-msg.rst b/Documentation/userspace-api/media/dvb/ca-get-msg.rst
index 995f461..e8802b4 100644
--- a/Documentation/userspace-api/media/dvb/ca-get-msg.rst
+++ b/Documentation/userspace-api/media/dvb/ca-get-msg.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _CA_GET_MSG:
diff --git a/Documentation/userspace-api/media/dvb/ca-get-slot-info.rst b/Documentation/userspace-api/media/dvb/ca-get-slot-info.rst
index c65987f..d283df3 100644
--- a/Documentation/userspace-api/media/dvb/ca-get-slot-info.rst
+++ b/Documentation/userspace-api/media/dvb/ca-get-slot-info.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _CA_GET_SLOT_INFO:
diff --git a/Documentation/userspace-api/media/dvb/ca-reset.rst b/Documentation/userspace-api/media/dvb/ca-reset.rst
index 116a5a8..fc49ef2 100644
--- a/Documentation/userspace-api/media/dvb/ca-reset.rst
+++ b/Documentation/userspace-api/media/dvb/ca-reset.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _CA_RESET:
diff --git a/Documentation/userspace-api/media/dvb/ca-send-msg.rst b/Documentation/userspace-api/media/dvb/ca-send-msg.rst
index 716d88e..cf423fe8 100644
--- a/Documentation/userspace-api/media/dvb/ca-send-msg.rst
+++ b/Documentation/userspace-api/media/dvb/ca-send-msg.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _CA_SEND_MSG:
diff --git a/Documentation/userspace-api/media/dvb/ca-set-descr.rst b/Documentation/userspace-api/media/dvb/ca-set-descr.rst
index 2c57371..a5c628a 100644
--- a/Documentation/userspace-api/media/dvb/ca-set-descr.rst
+++ b/Documentation/userspace-api/media/dvb/ca-set-descr.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _CA_SET_DESCR:
diff --git a/Documentation/userspace-api/media/dvb/ca.rst b/Documentation/userspace-api/media/dvb/ca.rst
index 643b7c4..6f6821e 100644
--- a/Documentation/userspace-api/media/dvb/ca.rst
+++ b/Documentation/userspace-api/media/dvb/ca.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _dvb_ca:
diff --git a/Documentation/userspace-api/media/dvb/ca_data_types.rst b/Documentation/userspace-api/media/dvb/ca_data_types.rst
index 20e2b55..54ea2a9 100644
--- a/Documentation/userspace-api/media/dvb/ca_data_types.rst
+++ b/Documentation/userspace-api/media/dvb/ca_data_types.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _ca_data_types:
diff --git a/Documentation/userspace-api/media/dvb/ca_function_calls.rst b/Documentation/userspace-api/media/dvb/ca_function_calls.rst
index b8aceb1..3b893fb 100644
--- a/Documentation/userspace-api/media/dvb/ca_function_calls.rst
+++ b/Documentation/userspace-api/media/dvb/ca_function_calls.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _ca_function_calls:
diff --git a/Documentation/userspace-api/media/dvb/demux.rst b/Documentation/userspace-api/media/dvb/demux.rst
index 00397b0..364ef48 100644
--- a/Documentation/userspace-api/media/dvb/demux.rst
+++ b/Documentation/userspace-api/media/dvb/demux.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _dvb_demux:
diff --git a/Documentation/userspace-api/media/dvb/dmx-add-pid.rst b/Documentation/userspace-api/media/dvb/dmx-add-pid.rst
index e309cd5..3f08ecd 100644
--- a/Documentation/userspace-api/media/dvb/dmx-add-pid.rst
+++ b/Documentation/userspace-api/media/dvb/dmx-add-pid.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _DMX_ADD_PID:
diff --git a/Documentation/userspace-api/media/dvb/dmx-expbuf.rst b/Documentation/userspace-api/media/dvb/dmx-expbuf.rst
index f76db8c..cde2b78 100644
--- a/Documentation/userspace-api/media/dvb/dmx-expbuf.rst
+++ b/Documentation/userspace-api/media/dvb/dmx-expbuf.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _DMX_EXPBUF:
diff --git a/Documentation/userspace-api/media/dvb/dmx-fclose.rst b/Documentation/userspace-api/media/dvb/dmx-fclose.rst
index e93bc60..af03679 100644
--- a/Documentation/userspace-api/media/dvb/dmx-fclose.rst
+++ b/Documentation/userspace-api/media/dvb/dmx-fclose.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _dmx_fclose:
diff --git a/Documentation/userspace-api/media/dvb/dmx-fopen.rst b/Documentation/userspace-api/media/dvb/dmx-fopen.rst
index ea98871..7117c9b 100644
--- a/Documentation/userspace-api/media/dvb/dmx-fopen.rst
+++ b/Documentation/userspace-api/media/dvb/dmx-fopen.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _dmx_fopen:
diff --git a/Documentation/userspace-api/media/dvb/dmx-fread.rst b/Documentation/userspace-api/media/dvb/dmx-fread.rst
index 25501be..c708a24 100644
--- a/Documentation/userspace-api/media/dvb/dmx-fread.rst
+++ b/Documentation/userspace-api/media/dvb/dmx-fread.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _dmx_fread:
diff --git a/Documentation/userspace-api/media/dvb/dmx-fwrite.rst b/Documentation/userspace-api/media/dvb/dmx-fwrite.rst
index 4400f4e..bef565a 100644
--- a/Documentation/userspace-api/media/dvb/dmx-fwrite.rst
+++ b/Documentation/userspace-api/media/dvb/dmx-fwrite.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _dmx_fwrite:
diff --git a/Documentation/userspace-api/media/dvb/dmx-get-pes-pids.rst b/Documentation/userspace-api/media/dvb/dmx-get-pes-pids.rst
index e1873e3..e92d94d 100644
--- a/Documentation/userspace-api/media/dvb/dmx-get-pes-pids.rst
+++ b/Documentation/userspace-api/media/dvb/dmx-get-pes-pids.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _DMX_GET_PES_PIDS:
diff --git a/Documentation/userspace-api/media/dvb/dmx-get-stc.rst b/Documentation/userspace-api/media/dvb/dmx-get-stc.rst
index 026a884..3762efc 100644
--- a/Documentation/userspace-api/media/dvb/dmx-get-stc.rst
+++ b/Documentation/userspace-api/media/dvb/dmx-get-stc.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _DMX_GET_STC:
diff --git a/Documentation/userspace-api/media/dvb/dmx-mmap.rst b/Documentation/userspace-api/media/dvb/dmx-mmap.rst
index 828ba9d..efa9b04 100644
--- a/Documentation/userspace-api/media/dvb/dmx-mmap.rst
+++ b/Documentation/userspace-api/media/dvb/dmx-mmap.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _dmx-mmap:
diff --git a/Documentation/userspace-api/media/dvb/dmx-munmap.rst b/Documentation/userspace-api/media/dvb/dmx-munmap.rst
index 905fdd5..308a959 100644
--- a/Documentation/userspace-api/media/dvb/dmx-munmap.rst
+++ b/Documentation/userspace-api/media/dvb/dmx-munmap.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _dmx-munmap:
diff --git a/Documentation/userspace-api/media/dvb/dmx-qbuf.rst b/Documentation/userspace-api/media/dvb/dmx-qbuf.rst
index 2c4657c..fcb1c55 100644
--- a/Documentation/userspace-api/media/dvb/dmx-qbuf.rst
+++ b/Documentation/userspace-api/media/dvb/dmx-qbuf.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _DMX_QBUF:
diff --git a/Documentation/userspace-api/media/dvb/dmx-querybuf.rst b/Documentation/userspace-api/media/dvb/dmx-querybuf.rst
index 6e234da..df13e2b 100644
--- a/Documentation/userspace-api/media/dvb/dmx-querybuf.rst
+++ b/Documentation/userspace-api/media/dvb/dmx-querybuf.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _DMX_QUERYBUF:
diff --git a/Documentation/userspace-api/media/dvb/dmx-remove-pid.rst b/Documentation/userspace-api/media/dvb/dmx-remove-pid.rst
index dee553a..ce408d0 100644
--- a/Documentation/userspace-api/media/dvb/dmx-remove-pid.rst
+++ b/Documentation/userspace-api/media/dvb/dmx-remove-pid.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _DMX_REMOVE_PID:
diff --git a/Documentation/userspace-api/media/dvb/dmx-reqbufs.rst b/Documentation/userspace-api/media/dvb/dmx-reqbufs.rst
index 9b9be45..433aed6 100644
--- a/Documentation/userspace-api/media/dvb/dmx-reqbufs.rst
+++ b/Documentation/userspace-api/media/dvb/dmx-reqbufs.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _DMX_REQBUFS:
diff --git a/Documentation/userspace-api/media/dvb/dmx-set-buffer-size.rst b/Documentation/userspace-api/media/dvb/dmx-set-buffer-size.rst
index 7c91da1..e803cba 100644
--- a/Documentation/userspace-api/media/dvb/dmx-set-buffer-size.rst
+++ b/Documentation/userspace-api/media/dvb/dmx-set-buffer-size.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _DMX_SET_BUFFER_SIZE:
diff --git a/Documentation/userspace-api/media/dvb/dmx-set-filter.rst b/Documentation/userspace-api/media/dvb/dmx-set-filter.rst
index cb33333..4cd3db5 100644
--- a/Documentation/userspace-api/media/dvb/dmx-set-filter.rst
+++ b/Documentation/userspace-api/media/dvb/dmx-set-filter.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _DMX_SET_FILTER:
diff --git a/Documentation/userspace-api/media/dvb/dmx-set-pes-filter.rst b/Documentation/userspace-api/media/dvb/dmx-set-pes-filter.rst
index 26da569..8e54fd2 100644
--- a/Documentation/userspace-api/media/dvb/dmx-set-pes-filter.rst
+++ b/Documentation/userspace-api/media/dvb/dmx-set-pes-filter.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _DMX_SET_PES_FILTER:
diff --git a/Documentation/userspace-api/media/dvb/dmx-start.rst b/Documentation/userspace-api/media/dvb/dmx-start.rst
index a1d35f0..6f1413e 100644
--- a/Documentation/userspace-api/media/dvb/dmx-start.rst
+++ b/Documentation/userspace-api/media/dvb/dmx-start.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _DMX_START:
diff --git a/Documentation/userspace-api/media/dvb/dmx-stop.rst b/Documentation/userspace-api/media/dvb/dmx-stop.rst
index 5e6e805..cbc3956 100644
--- a/Documentation/userspace-api/media/dvb/dmx-stop.rst
+++ b/Documentation/userspace-api/media/dvb/dmx-stop.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _DMX_STOP:
diff --git a/Documentation/userspace-api/media/dvb/dmx_fcalls.rst b/Documentation/userspace-api/media/dvb/dmx_fcalls.rst
index 04e150f..a14e7a6 100644
--- a/Documentation/userspace-api/media/dvb/dmx_fcalls.rst
+++ b/Documentation/userspace-api/media/dvb/dmx_fcalls.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _dmx_fcalls:
diff --git a/Documentation/userspace-api/media/dvb/dmx_types.rst b/Documentation/userspace-api/media/dvb/dmx_types.rst
index 635b8fd..33458fb 100644
--- a/Documentation/userspace-api/media/dvb/dmx_types.rst
+++ b/Documentation/userspace-api/media/dvb/dmx_types.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _dmx_types:
diff --git a/Documentation/userspace-api/media/dvb/dvb-fe-read-status.rst b/Documentation/userspace-api/media/dvb/dvb-fe-read-status.rst
index 5d6a7735..fbd0548 100644
--- a/Documentation/userspace-api/media/dvb/dvb-fe-read-status.rst
+++ b/Documentation/userspace-api/media/dvb/dvb-fe-read-status.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _dvb-fe-read-status:
diff --git a/Documentation/userspace-api/media/dvb/dvb-frontend-event.rst b/Documentation/userspace-api/media/dvb/dvb-frontend-event.rst
index 7f5e56c..0e2fd3a0 100644
--- a/Documentation/userspace-api/media/dvb/dvb-frontend-event.rst
+++ b/Documentation/userspace-api/media/dvb/dvb-frontend-event.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. c:type:: dvb_frontend_event
diff --git a/Documentation/userspace-api/media/dvb/dvb-frontend-parameters.rst b/Documentation/userspace-api/media/dvb/dvb-frontend-parameters.rst
index 83b1bcc..9dd2f54 100644
--- a/Documentation/userspace-api/media/dvb/dvb-frontend-parameters.rst
+++ b/Documentation/userspace-api/media/dvb/dvb-frontend-parameters.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. c:type:: dvb_frontend_parameters
diff --git a/Documentation/userspace-api/media/dvb/dvbapi.rst b/Documentation/userspace-api/media/dvb/dvbapi.rst
index 74b16ab..1dda693 100644
--- a/Documentation/userspace-api/media/dvb/dvbapi.rst
+++ b/Documentation/userspace-api/media/dvb/dvbapi.rst
@@ -1,12 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. include:: <isonum.txt>
.. _dvbapi:
diff --git a/Documentation/userspace-api/media/dvb/dvbproperty.rst b/Documentation/userspace-api/media/dvb/dvbproperty.rst
index 1716733..981da20 100644
--- a/Documentation/userspace-api/media/dvb/dvbproperty.rst
+++ b/Documentation/userspace-api/media/dvb/dvbproperty.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _frontend-properties:
diff --git a/Documentation/userspace-api/media/dvb/dvbstb.svg b/Documentation/userspace-api/media/dvb/dvbstb.svg
index b333d0f..87e68ba 100644
--- a/Documentation/userspace-api/media/dvb/dvbstb.svg
+++ b/Documentation/userspace-api/media/dvb/dvbstb.svg
@@ -1,31 +1,5 @@
<?xml version="1.0" encoding="UTF-8"?>
-<!--
- This file is dual-licensed: you can use it either under the terms
- of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this
- dual licensing only applies to this file, and not this project as a
- whole.
-
- a) This file is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation version 2 of
- the License.
-
- This file is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- Or, alternatively,
-
- b) Permission is granted to copy, distribute and/or modify this
- document under the terms of the GNU Free Documentation License,
- Version 1.1 or any later version published by the Free Software
- Foundation, with no Invariant Sections, no Front-Cover Texts
- and no Back-Cover Texts. A copy of the license is included at
- Documentation/userspace-api/media/fdl-appendix.rst.
-
- TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
--->
+<!-- SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later -->
<svg id="svg2" width="15.847cm" height="8.4187cm" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" preserveAspectRatio="xMidYMid" version="1.2" viewBox="0 0 23770.123 12628.122" xml:space="preserve" xmlns="http://www.w3.org/2000/svg" xmlns:cc="http://creativecommons.org/ns#" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"><defs id="defs142"><marker id="Arrow1Lend" overflow="visible" orient="auto"><path id="path954" transform="matrix(-.8 0 0 -.8 -10 0)" d="m0 0 5-5-17.5 5 17.5 5z" fill-rule="evenodd" stroke="#000" stroke-width="1pt"/></marker><marker id="marker1243" overflow="visible" orient="auto"><path id="path1241" transform="matrix(-.8 0 0 -.8 -10 0)" d="m0 0 5-5-17.5 5 17.5 5z" fill-rule="evenodd" stroke="#000" stroke-width="1pt"/></marker></defs><metadata id="metadata519"><rdf:RDF><cc:Work
rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type rdf:resource="http://purl.org/dc/dcmitype/StillImage"/><dc:title/></cc:Work></rdf:RDF></metadata><rect id="rect197" class="BoundingBox" x="5355.1" y="13.122" width="18403" height="9603" fill="none"/><path id="path199" d="m14556 9614.1h-9200v-9600h18400v9600z" fill="#fff"/><path id="path201" d="m14556 9614.1h-9200v-9600h18400v9600z" fill="none" stroke="#000"/><rect id="rect206" class="BoundingBox" x="13.122" y="4013.1" width="4544" height="2403" fill="none"/><path id="path208" d="m2285.1 6414.1h-2271v-2400h4541v2400z" fill="#fff"/><path id="path210" d="m2285.1 6414.1h-2271v-2400h4541v2400z" fill="none" stroke="#000"/><text id="text212" class="TextShape" x="-2443.8779" y="-4585.8779"><tspan id="tspan214" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan216" class="TextPosition"
x="1281.1219" y="5435.1221"><tspan id="tspan218" fill="#000000">Antena</tspan></tspan></tspan></text>
diff --git a/Documentation/userspace-api/media/dvb/examples.rst b/Documentation/userspace-api/media/dvb/examples.rst
index bd0adde..086587c 100644
--- a/Documentation/userspace-api/media/dvb/examples.rst
+++ b/Documentation/userspace-api/media/dvb/examples.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _dvb_examples:
diff --git a/Documentation/userspace-api/media/dvb/fe-bandwidth-t.rst b/Documentation/userspace-api/media/dvb/fe-bandwidth-t.rst
index 6293287..904b0c3 100644
--- a/Documentation/userspace-api/media/dvb/fe-bandwidth-t.rst
+++ b/Documentation/userspace-api/media/dvb/fe-bandwidth-t.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
******************
Frontend bandwidth
diff --git a/Documentation/userspace-api/media/dvb/fe-diseqc-recv-slave-reply.rst b/Documentation/userspace-api/media/dvb/fe-diseqc-recv-slave-reply.rst
index b520974..115cced 100644
--- a/Documentation/userspace-api/media/dvb/fe-diseqc-recv-slave-reply.rst
+++ b/Documentation/userspace-api/media/dvb/fe-diseqc-recv-slave-reply.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _FE_DISEQC_RECV_SLAVE_REPLY:
diff --git a/Documentation/userspace-api/media/dvb/fe-diseqc-reset-overload.rst b/Documentation/userspace-api/media/dvb/fe-diseqc-reset-overload.rst
index c59af46..5ffc34a 100644
--- a/Documentation/userspace-api/media/dvb/fe-diseqc-reset-overload.rst
+++ b/Documentation/userspace-api/media/dvb/fe-diseqc-reset-overload.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _FE_DISEQC_RESET_OVERLOAD:
diff --git a/Documentation/userspace-api/media/dvb/fe-diseqc-send-burst.rst b/Documentation/userspace-api/media/dvb/fe-diseqc-send-burst.rst
index 19b51d0..fd59afe 100644
--- a/Documentation/userspace-api/media/dvb/fe-diseqc-send-burst.rst
+++ b/Documentation/userspace-api/media/dvb/fe-diseqc-send-burst.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _FE_DISEQC_SEND_BURST:
diff --git a/Documentation/userspace-api/media/dvb/fe-diseqc-send-master-cmd.rst b/Documentation/userspace-api/media/dvb/fe-diseqc-send-master-cmd.rst
index f75513d..faa2a83 100644
--- a/Documentation/userspace-api/media/dvb/fe-diseqc-send-master-cmd.rst
+++ b/Documentation/userspace-api/media/dvb/fe-diseqc-send-master-cmd.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _FE_DISEQC_SEND_MASTER_CMD:
diff --git a/Documentation/userspace-api/media/dvb/fe-dishnetwork-send-legacy-cmd.rst b/Documentation/userspace-api/media/dvb/fe-dishnetwork-send-legacy-cmd.rst
index ea66f72..60d69bb 100644
--- a/Documentation/userspace-api/media/dvb/fe-dishnetwork-send-legacy-cmd.rst
+++ b/Documentation/userspace-api/media/dvb/fe-dishnetwork-send-legacy-cmd.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _FE_DISHNETWORK_SEND_LEGACY_CMD:
diff --git a/Documentation/userspace-api/media/dvb/fe-enable-high-lnb-voltage.rst b/Documentation/userspace-api/media/dvb/fe-enable-high-lnb-voltage.rst
index 9bdf1e8..df0cc91 100644
--- a/Documentation/userspace-api/media/dvb/fe-enable-high-lnb-voltage.rst
+++ b/Documentation/userspace-api/media/dvb/fe-enable-high-lnb-voltage.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _FE_ENABLE_HIGH_LNB_VOLTAGE:
diff --git a/Documentation/userspace-api/media/dvb/fe-get-event.rst b/Documentation/userspace-api/media/dvb/fe-get-event.rst
index 19df41d..723bb3a 100644
--- a/Documentation/userspace-api/media/dvb/fe-get-event.rst
+++ b/Documentation/userspace-api/media/dvb/fe-get-event.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _FE_GET_EVENT:
diff --git a/Documentation/userspace-api/media/dvb/fe-get-frontend.rst b/Documentation/userspace-api/media/dvb/fe-get-frontend.rst
index 7968adc..2bfc1f1 100644
--- a/Documentation/userspace-api/media/dvb/fe-get-frontend.rst
+++ b/Documentation/userspace-api/media/dvb/fe-get-frontend.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _FE_GET_FRONTEND:
diff --git a/Documentation/userspace-api/media/dvb/fe-get-info.rst b/Documentation/userspace-api/media/dvb/fe-get-info.rst
index 6b3ffd3..eba115c 100644
--- a/Documentation/userspace-api/media/dvb/fe-get-info.rst
+++ b/Documentation/userspace-api/media/dvb/fe-get-info.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _FE_GET_INFO:
diff --git a/Documentation/userspace-api/media/dvb/fe-get-property.rst b/Documentation/userspace-api/media/dvb/fe-get-property.rst
index 088d4e3..10e1db1 100644
--- a/Documentation/userspace-api/media/dvb/fe-get-property.rst
+++ b/Documentation/userspace-api/media/dvb/fe-get-property.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _FE_GET_PROPERTY:
diff --git a/Documentation/userspace-api/media/dvb/fe-read-ber.rst b/Documentation/userspace-api/media/dvb/fe-read-ber.rst
index d0a706a..2200eb1 100644
--- a/Documentation/userspace-api/media/dvb/fe-read-ber.rst
+++ b/Documentation/userspace-api/media/dvb/fe-read-ber.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _FE_READ_BER:
diff --git a/Documentation/userspace-api/media/dvb/fe-read-signal-strength.rst b/Documentation/userspace-api/media/dvb/fe-read-signal-strength.rst
index df79837..4832efa 100644
--- a/Documentation/userspace-api/media/dvb/fe-read-signal-strength.rst
+++ b/Documentation/userspace-api/media/dvb/fe-read-signal-strength.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _FE_READ_SIGNAL_STRENGTH:
diff --git a/Documentation/userspace-api/media/dvb/fe-read-snr.rst b/Documentation/userspace-api/media/dvb/fe-read-snr.rst
index e56147a..141e4fc 100644
--- a/Documentation/userspace-api/media/dvb/fe-read-snr.rst
+++ b/Documentation/userspace-api/media/dvb/fe-read-snr.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _FE_READ_SNR:
diff --git a/Documentation/userspace-api/media/dvb/fe-read-status.rst b/Documentation/userspace-api/media/dvb/fe-read-status.rst
index cf781d4..ba61feb 100644
--- a/Documentation/userspace-api/media/dvb/fe-read-status.rst
+++ b/Documentation/userspace-api/media/dvb/fe-read-status.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _FE_READ_STATUS:
diff --git a/Documentation/userspace-api/media/dvb/fe-read-uncorrected-blocks.rst b/Documentation/userspace-api/media/dvb/fe-read-uncorrected-blocks.rst
index d042e8c..bf9746f 100644
--- a/Documentation/userspace-api/media/dvb/fe-read-uncorrected-blocks.rst
+++ b/Documentation/userspace-api/media/dvb/fe-read-uncorrected-blocks.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _FE_READ_UNCORRECTED_BLOCKS:
diff --git a/Documentation/userspace-api/media/dvb/fe-set-frontend-tune-mode.rst b/Documentation/userspace-api/media/dvb/fe-set-frontend-tune-mode.rst
index 8e05996..f0e178e 100644
--- a/Documentation/userspace-api/media/dvb/fe-set-frontend-tune-mode.rst
+++ b/Documentation/userspace-api/media/dvb/fe-set-frontend-tune-mode.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _FE_SET_FRONTEND_TUNE_MODE:
diff --git a/Documentation/userspace-api/media/dvb/fe-set-frontend.rst b/Documentation/userspace-api/media/dvb/fe-set-frontend.rst
index 960c95c..2b169778 100644
--- a/Documentation/userspace-api/media/dvb/fe-set-frontend.rst
+++ b/Documentation/userspace-api/media/dvb/fe-set-frontend.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _FE_SET_FRONTEND:
diff --git a/Documentation/userspace-api/media/dvb/fe-set-tone.rst b/Documentation/userspace-api/media/dvb/fe-set-tone.rst
index 5726a20..944d544 100644
--- a/Documentation/userspace-api/media/dvb/fe-set-tone.rst
+++ b/Documentation/userspace-api/media/dvb/fe-set-tone.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _FE_SET_TONE:
diff --git a/Documentation/userspace-api/media/dvb/fe-set-voltage.rst b/Documentation/userspace-api/media/dvb/fe-set-voltage.rst
index f319180..73740be 100644
--- a/Documentation/userspace-api/media/dvb/fe-set-voltage.rst
+++ b/Documentation/userspace-api/media/dvb/fe-set-voltage.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _FE_SET_VOLTAGE:
diff --git a/Documentation/userspace-api/media/dvb/fe-type-t.rst b/Documentation/userspace-api/media/dvb/fe-type-t.rst
index 1617a8c..e8499d4 100644
--- a/Documentation/userspace-api/media/dvb/fe-type-t.rst
+++ b/Documentation/userspace-api/media/dvb/fe-type-t.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
*************
Frontend type
diff --git a/Documentation/userspace-api/media/dvb/fe_property_parameters.rst b/Documentation/userspace-api/media/dvb/fe_property_parameters.rst
index 3f4ced2..ecd84a8 100644
--- a/Documentation/userspace-api/media/dvb/fe_property_parameters.rst
+++ b/Documentation/userspace-api/media/dvb/fe_property_parameters.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _fe_property_parameters:
diff --git a/Documentation/userspace-api/media/dvb/frontend-header.rst b/Documentation/userspace-api/media/dvb/frontend-header.rst
index cf8e515..77f40336 100644
--- a/Documentation/userspace-api/media/dvb/frontend-header.rst
+++ b/Documentation/userspace-api/media/dvb/frontend-header.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
Frontend uAPI data types
========================
diff --git a/Documentation/userspace-api/media/dvb/frontend-property-cable-systems.rst b/Documentation/userspace-api/media/dvb/frontend-property-cable-systems.rst
index 56657a6..92ef989 100644
--- a/Documentation/userspace-api/media/dvb/frontend-property-cable-systems.rst
+++ b/Documentation/userspace-api/media/dvb/frontend-property-cable-systems.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _frontend-property-cable-systems:
diff --git a/Documentation/userspace-api/media/dvb/frontend-property-satellite-systems.rst b/Documentation/userspace-api/media/dvb/frontend-property-satellite-systems.rst
index e64fd62..13b344b 100644
--- a/Documentation/userspace-api/media/dvb/frontend-property-satellite-systems.rst
+++ b/Documentation/userspace-api/media/dvb/frontend-property-satellite-systems.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _frontend-property-satellite-systems:
diff --git a/Documentation/userspace-api/media/dvb/frontend-property-terrestrial-systems.rst b/Documentation/userspace-api/media/dvb/frontend-property-terrestrial-systems.rst
index 1079522..8cd461ce 100644
--- a/Documentation/userspace-api/media/dvb/frontend-property-terrestrial-systems.rst
+++ b/Documentation/userspace-api/media/dvb/frontend-property-terrestrial-systems.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _frontend-property-terrestrial-systems:
diff --git a/Documentation/userspace-api/media/dvb/frontend-stat-properties.rst b/Documentation/userspace-api/media/dvb/frontend-stat-properties.rst
index ae6ed51..223c1c5 100644
--- a/Documentation/userspace-api/media/dvb/frontend-stat-properties.rst
+++ b/Documentation/userspace-api/media/dvb/frontend-stat-properties.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _frontend-stat-properties:
diff --git a/Documentation/userspace-api/media/dvb/frontend.rst b/Documentation/userspace-api/media/dvb/frontend.rst
index 41ad519..1df6873 100644
--- a/Documentation/userspace-api/media/dvb/frontend.rst
+++ b/Documentation/userspace-api/media/dvb/frontend.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _dvb_frontend:
diff --git a/Documentation/userspace-api/media/dvb/frontend_f_close.rst b/Documentation/userspace-api/media/dvb/frontend_f_close.rst
index 582e19a..96e15b4 100644
--- a/Documentation/userspace-api/media/dvb/frontend_f_close.rst
+++ b/Documentation/userspace-api/media/dvb/frontend_f_close.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _frontend_f_close:
diff --git a/Documentation/userspace-api/media/dvb/frontend_f_open.rst b/Documentation/userspace-api/media/dvb/frontend_f_open.rst
index 0be3b24..49a01dd 100644
--- a/Documentation/userspace-api/media/dvb/frontend_f_open.rst
+++ b/Documentation/userspace-api/media/dvb/frontend_f_open.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _frontend_f_open:
diff --git a/Documentation/userspace-api/media/dvb/frontend_fcalls.rst b/Documentation/userspace-api/media/dvb/frontend_fcalls.rst
index 2b5e7a4..1df27b6 100644
--- a/Documentation/userspace-api/media/dvb/frontend_fcalls.rst
+++ b/Documentation/userspace-api/media/dvb/frontend_fcalls.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _frontend_fcalls:
diff --git a/Documentation/userspace-api/media/dvb/frontend_legacy_api.rst b/Documentation/userspace-api/media/dvb/frontend_legacy_api.rst
index 1bd804f..535828c 100644
--- a/Documentation/userspace-api/media/dvb/frontend_legacy_api.rst
+++ b/Documentation/userspace-api/media/dvb/frontend_legacy_api.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _frontend_legacy_types:
diff --git a/Documentation/userspace-api/media/dvb/frontend_legacy_dvbv3_api.rst b/Documentation/userspace-api/media/dvb/frontend_legacy_dvbv3_api.rst
index 29ad0f9..09de723 100644
--- a/Documentation/userspace-api/media/dvb/frontend_legacy_dvbv3_api.rst
+++ b/Documentation/userspace-api/media/dvb/frontend_legacy_dvbv3_api.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _frontend_legacy_dvbv3_api:
diff --git a/Documentation/userspace-api/media/dvb/headers.rst b/Documentation/userspace-api/media/dvb/headers.rst
index ffd8f43..9743ffc 100644
--- a/Documentation/userspace-api/media/dvb/headers.rst
+++ b/Documentation/userspace-api/media/dvb/headers.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
****************************
Digital TV uAPI header files
diff --git a/Documentation/userspace-api/media/dvb/intro.rst b/Documentation/userspace-api/media/dvb/intro.rst
index f1235ef..a935f39 100644
--- a/Documentation/userspace-api/media/dvb/intro.rst
+++ b/Documentation/userspace-api/media/dvb/intro.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _dvb_introdution:
diff --git a/Documentation/userspace-api/media/dvb/legacy_dvb_apis.rst b/Documentation/userspace-api/media/dvb/legacy_dvb_apis.rst
index 17c3b06..6104879 100644
--- a/Documentation/userspace-api/media/dvb/legacy_dvb_apis.rst
+++ b/Documentation/userspace-api/media/dvb/legacy_dvb_apis.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _legacy_dvb_apis:
diff --git a/Documentation/userspace-api/media/dvb/net-add-if.rst b/Documentation/userspace-api/media/dvb/net-add-if.rst
index e75ec4d..0859830 100644
--- a/Documentation/userspace-api/media/dvb/net-add-if.rst
+++ b/Documentation/userspace-api/media/dvb/net-add-if.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _NET_ADD_IF:
diff --git a/Documentation/userspace-api/media/dvb/net-get-if.rst b/Documentation/userspace-api/media/dvb/net-get-if.rst
index c5421d9..d8c9f93 100644
--- a/Documentation/userspace-api/media/dvb/net-get-if.rst
+++ b/Documentation/userspace-api/media/dvb/net-get-if.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _NET_GET_IF:
diff --git a/Documentation/userspace-api/media/dvb/net-remove-if.rst b/Documentation/userspace-api/media/dvb/net-remove-if.rst
index d530559..ecbcacb 100644
--- a/Documentation/userspace-api/media/dvb/net-remove-if.rst
+++ b/Documentation/userspace-api/media/dvb/net-remove-if.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _NET_REMOVE_IF:
diff --git a/Documentation/userspace-api/media/dvb/net-types.rst b/Documentation/userspace-api/media/dvb/net-types.rst
index 94323cf..075264b 100644
--- a/Documentation/userspace-api/media/dvb/net-types.rst
+++ b/Documentation/userspace-api/media/dvb/net-types.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _net_types:
diff --git a/Documentation/userspace-api/media/dvb/net.rst b/Documentation/userspace-api/media/dvb/net.rst
index 084f33d..33368f5 100644
--- a/Documentation/userspace-api/media/dvb/net.rst
+++ b/Documentation/userspace-api/media/dvb/net.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _net:
diff --git a/Documentation/userspace-api/media/dvb/query-dvb-frontend-info.rst b/Documentation/userspace-api/media/dvb/query-dvb-frontend-info.rst
index d854ccf..f099b49 100644
--- a/Documentation/userspace-api/media/dvb/query-dvb-frontend-info.rst
+++ b/Documentation/userspace-api/media/dvb/query-dvb-frontend-info.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _query-dvb-frontend-info:
diff --git a/Documentation/userspace-api/media/dvb/video-clear-buffer.rst b/Documentation/userspace-api/media/dvb/video-clear-buffer.rst
index ba7a133..fa1f2f4 100644
--- a/Documentation/userspace-api/media/dvb/video-clear-buffer.rst
+++ b/Documentation/userspace-api/media/dvb/video-clear-buffer.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _VIDEO_CLEAR_BUFFER:
diff --git a/Documentation/userspace-api/media/dvb/video-command.rst b/Documentation/userspace-api/media/dvb/video-command.rst
index d96d764..ef0da85d 100644
--- a/Documentation/userspace-api/media/dvb/video-command.rst
+++ b/Documentation/userspace-api/media/dvb/video-command.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _VIDEO_COMMAND:
diff --git a/Documentation/userspace-api/media/dvb/video-continue.rst b/Documentation/userspace-api/media/dvb/video-continue.rst
index bb18514..9a767b5 100644
--- a/Documentation/userspace-api/media/dvb/video-continue.rst
+++ b/Documentation/userspace-api/media/dvb/video-continue.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _VIDEO_CONTINUE:
diff --git a/Documentation/userspace-api/media/dvb/video-fast-forward.rst b/Documentation/userspace-api/media/dvb/video-fast-forward.rst
index 1f6ec89..c43a13c 100644
--- a/Documentation/userspace-api/media/dvb/video-fast-forward.rst
+++ b/Documentation/userspace-api/media/dvb/video-fast-forward.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _VIDEO_FAST_FORWARD:
diff --git a/Documentation/userspace-api/media/dvb/video-fclose.rst b/Documentation/userspace-api/media/dvb/video-fclose.rst
index f9d2a8e..27ccb2d 100644
--- a/Documentation/userspace-api/media/dvb/video-fclose.rst
+++ b/Documentation/userspace-api/media/dvb/video-fclose.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _video_fclose:
diff --git a/Documentation/userspace-api/media/dvb/video-fopen.rst b/Documentation/userspace-api/media/dvb/video-fopen.rst
index a418cf6..aa1dc60 100644
--- a/Documentation/userspace-api/media/dvb/video-fopen.rst
+++ b/Documentation/userspace-api/media/dvb/video-fopen.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _video_fopen:
diff --git a/Documentation/userspace-api/media/dvb/video-freeze.rst b/Documentation/userspace-api/media/dvb/video-freeze.rst
index 46f287f..93e0ae8 100644
--- a/Documentation/userspace-api/media/dvb/video-freeze.rst
+++ b/Documentation/userspace-api/media/dvb/video-freeze.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _VIDEO_FREEZE:
diff --git a/Documentation/userspace-api/media/dvb/video-fwrite.rst b/Documentation/userspace-api/media/dvb/video-fwrite.rst
index 08dfafa..5ccdf78 100644
--- a/Documentation/userspace-api/media/dvb/video-fwrite.rst
+++ b/Documentation/userspace-api/media/dvb/video-fwrite.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _video_fwrite:
diff --git a/Documentation/userspace-api/media/dvb/video-get-capabilities.rst b/Documentation/userspace-api/media/dvb/video-get-capabilities.rst
index f6f19df..619f78a 100644
--- a/Documentation/userspace-api/media/dvb/video-get-capabilities.rst
+++ b/Documentation/userspace-api/media/dvb/video-get-capabilities.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _VIDEO_GET_CAPABILITIES:
diff --git a/Documentation/userspace-api/media/dvb/video-get-event.rst b/Documentation/userspace-api/media/dvb/video-get-event.rst
index 6db8e63..29566a2 100644
--- a/Documentation/userspace-api/media/dvb/video-get-event.rst
+++ b/Documentation/userspace-api/media/dvb/video-get-event.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _VIDEO_GET_EVENT:
diff --git a/Documentation/userspace-api/media/dvb/video-get-frame-count.rst b/Documentation/userspace-api/media/dvb/video-get-frame-count.rst
index 4152a42..5f65f8d 100644
--- a/Documentation/userspace-api/media/dvb/video-get-frame-count.rst
+++ b/Documentation/userspace-api/media/dvb/video-get-frame-count.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _VIDEO_GET_FRAME_COUNT:
diff --git a/Documentation/userspace-api/media/dvb/video-get-pts.rst b/Documentation/userspace-api/media/dvb/video-get-pts.rst
index f957df7..28655a1 100644
--- a/Documentation/userspace-api/media/dvb/video-get-pts.rst
+++ b/Documentation/userspace-api/media/dvb/video-get-pts.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _VIDEO_GET_PTS:
diff --git a/Documentation/userspace-api/media/dvb/video-get-size.rst b/Documentation/userspace-api/media/dvb/video-get-size.rst
index 3767455..a199afb 100644
--- a/Documentation/userspace-api/media/dvb/video-get-size.rst
+++ b/Documentation/userspace-api/media/dvb/video-get-size.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _VIDEO_GET_SIZE:
diff --git a/Documentation/userspace-api/media/dvb/video-get-status.rst b/Documentation/userspace-api/media/dvb/video-get-status.rst
index d017259..3f29dac 100644
--- a/Documentation/userspace-api/media/dvb/video-get-status.rst
+++ b/Documentation/userspace-api/media/dvb/video-get-status.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _VIDEO_GET_STATUS:
diff --git a/Documentation/userspace-api/media/dvb/video-play.rst b/Documentation/userspace-api/media/dvb/video-play.rst
index 2b6b4e9..71db54d 100644
--- a/Documentation/userspace-api/media/dvb/video-play.rst
+++ b/Documentation/userspace-api/media/dvb/video-play.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _VIDEO_PLAY:
diff --git a/Documentation/userspace-api/media/dvb/video-select-source.rst b/Documentation/userspace-api/media/dvb/video-select-source.rst
index 504f768..2e4ee53 100644
--- a/Documentation/userspace-api/media/dvb/video-select-source.rst
+++ b/Documentation/userspace-api/media/dvb/video-select-source.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _VIDEO_SELECT_SOURCE:
diff --git a/Documentation/userspace-api/media/dvb/video-set-blank.rst b/Documentation/userspace-api/media/dvb/video-set-blank.rst
index a2608df..5454fe79 100644
--- a/Documentation/userspace-api/media/dvb/video-set-blank.rst
+++ b/Documentation/userspace-api/media/dvb/video-set-blank.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _VIDEO_SET_BLANK:
diff --git a/Documentation/userspace-api/media/dvb/video-set-display-format.rst b/Documentation/userspace-api/media/dvb/video-set-display-format.rst
index c587b3d..ada6113 100644
--- a/Documentation/userspace-api/media/dvb/video-set-display-format.rst
+++ b/Documentation/userspace-api/media/dvb/video-set-display-format.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _VIDEO_SET_DISPLAY_FORMAT:
diff --git a/Documentation/userspace-api/media/dvb/video-set-format.rst b/Documentation/userspace-api/media/dvb/video-set-format.rst
index ced74ed..758a5d1 100644
--- a/Documentation/userspace-api/media/dvb/video-set-format.rst
+++ b/Documentation/userspace-api/media/dvb/video-set-format.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _VIDEO_SET_FORMAT:
diff --git a/Documentation/userspace-api/media/dvb/video-set-streamtype.rst b/Documentation/userspace-api/media/dvb/video-set-streamtype.rst
index 1729bc0..f3a9985 100644
--- a/Documentation/userspace-api/media/dvb/video-set-streamtype.rst
+++ b/Documentation/userspace-api/media/dvb/video-set-streamtype.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _VIDEO_SET_STREAMTYPE:
diff --git a/Documentation/userspace-api/media/dvb/video-slowmotion.rst b/Documentation/userspace-api/media/dvb/video-slowmotion.rst
index b8cfba7..2ccb84d 100644
--- a/Documentation/userspace-api/media/dvb/video-slowmotion.rst
+++ b/Documentation/userspace-api/media/dvb/video-slowmotion.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _VIDEO_SLOWMOTION:
diff --git a/Documentation/userspace-api/media/dvb/video-stillpicture.rst b/Documentation/userspace-api/media/dvb/video-stillpicture.rst
index 5432619a..a04f9f3 100644
--- a/Documentation/userspace-api/media/dvb/video-stillpicture.rst
+++ b/Documentation/userspace-api/media/dvb/video-stillpicture.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _VIDEO_STILLPICTURE:
diff --git a/Documentation/userspace-api/media/dvb/video-stop.rst b/Documentation/userspace-api/media/dvb/video-stop.rst
index 9a53fe7..9318655 100644
--- a/Documentation/userspace-api/media/dvb/video-stop.rst
+++ b/Documentation/userspace-api/media/dvb/video-stop.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _VIDEO_STOP:
diff --git a/Documentation/userspace-api/media/dvb/video-try-command.rst b/Documentation/userspace-api/media/dvb/video-try-command.rst
index 6166795..430c360 100644
--- a/Documentation/userspace-api/media/dvb/video-try-command.rst
+++ b/Documentation/userspace-api/media/dvb/video-try-command.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _VIDEO_TRY_COMMAND:
diff --git a/Documentation/userspace-api/media/dvb/video.rst b/Documentation/userspace-api/media/dvb/video.rst
index 537eae1..3ed1bbf 100644
--- a/Documentation/userspace-api/media/dvb/video.rst
+++ b/Documentation/userspace-api/media/dvb/video.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _dvb_video:
diff --git a/Documentation/userspace-api/media/dvb/video_function_calls.rst b/Documentation/userspace-api/media/dvb/video_function_calls.rst
index 4902a40..20a897b 100644
--- a/Documentation/userspace-api/media/dvb/video_function_calls.rst
+++ b/Documentation/userspace-api/media/dvb/video_function_calls.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _video_function_calls:
diff --git a/Documentation/userspace-api/media/dvb/video_types.rst b/Documentation/userspace-api/media/dvb/video_types.rst
index bdba1d4..c4557d3 100644
--- a/Documentation/userspace-api/media/dvb/video_types.rst
+++ b/Documentation/userspace-api/media/dvb/video_types.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _video_types:
diff --git a/Documentation/userspace-api/media/fdl-appendix.rst b/Documentation/userspace-api/media/fdl-appendix.rst
index 70c8cda..683ebed 100644
--- a/Documentation/userspace-api/media/fdl-appendix.rst
+++ b/Documentation/userspace-api/media/fdl-appendix.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _fdl:
diff --git a/Documentation/userspace-api/media/gen-errors.rst b/Documentation/userspace-api/media/gen-errors.rst
index abae4db..e595d0b 100644
--- a/Documentation/userspace-api/media/gen-errors.rst
+++ b/Documentation/userspace-api/media/gen-errors.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _gen_errors:
diff --git a/Documentation/userspace-api/media/glossary.rst b/Documentation/userspace-api/media/glossary.rst
new file mode 100644
index 0000000..cb165d7
--- /dev/null
+++ b/Documentation/userspace-api/media/glossary.rst
@@ -0,0 +1,205 @@
+.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later
+
+========
+Glossary
+========
+
+.. note::
+
+ The goal of this section is to standardize the terms used within the media
+ userspace API documentation. This is Work In Progress.
+
+.. Please keep the glossary entries in alphabetical order
+
+.. glossary::
+
+ Bridge Driver
+ A :term:`Device Driver` that implements the main logic to talk with
+ media hardware.
+
+ CEC API
+ **Consumer Electronics Control API**
+
+ An API designed to receive and transmit data via an HDMI
+ CEC interface.
+
+ See :ref:`cec`.
+
+ Device Driver
+ Part of the Linux Kernel that implements support for a hardware
+ component.
+
+ Device Node
+ A character device node in the file system used to control and
+ transfer data in and out of a Kernel driver.
+
+ Digital TV API
+ **Previously known as DVB API**
+
+ An API designed to control a subset of the :term:`Media Hardware`
+ that implements digital TV (e. g. DVB, ATSC, ISDB, etc).
+
+ See :ref:`dvbapi`.
+
+ DSP
+ **Digital Signal Processor**
+
+ A specialized :term:`Microprocessor`, with its architecture
+ optimized for the operational needs of digital signal processing.
+
+ FPGA
+ **Field-programmable Gate Array**
+
+ An :term:`IC` circuit designed to be configured by a customer or
+ a designer after manufacturing.
+
+ See https://en.wikipedia.org/wiki/Field-programmable_gate_array.
+
+ Hardware Component
+ A subset of the :term:`Media Hardware`. For example an :term:`I²C` or
+ :term:`SPI` device, or an :term:`IP Block` inside an
+ :term:`SoC` or :term:`FPGA`.
+
+ Hardware Peripheral
+ A group of :term:`hardware components <Hardware Component>` that
+ together make a larger user-facing functional peripheral. For
+ instance, the :term:`SoC` :term:`ISP` :term:`IP Block`
+ and the external camera sensors together make a camera hardware
+ peripheral.
+
+ Also known as :term:`Peripheral`.
+
+ I²C
+ **Inter-Integrated Circuit**
+
+ A multi-master, multi-slave, packet switched, single-ended,
+ serial computer bus used to control some hardware components
+ like sub-device hardware components.
+
+ See http://www.nxp.com/docs/en/user-guide/UM10204.pdf.
+
+ IC
+ **Integrated circuit**
+
+ A set of electronic circuits on one small flat piece of
+ semiconductor material, normally silicon.
+
+ Also known as chip.
+
+ IP Block
+ **Intellectual property core**
+
+ In electronic design a semiconductor intellectual property core,
+ is a reusable unit of logic, cell, or integrated circuit layout
+ design that is the intellectual property of one party.
+ IP Blocks may be licensed to another party or can be owned
+ and used by a single party alone.
+
+ See https://en.wikipedia.org/wiki/Semiconductor_intellectual_property_core).
+
+ ISP
+ **Image Signal Processor**
+
+ A specialized processor that implements a set of algorithms for
+ processing image data. ISPs may implement algorithms for lens
+ shading correction, demosaicing, scaling and pixel format conversion
+ as well as produce statistics for the use of the control
+ algorithms (e.g. automatic exposure, white balance and focus).
+
+ Media API
+ A set of userspace APIs used to control the media hardware. It is
+ composed by:
+
+ - :term:`CEC API`;
+ - :term:`Digital TV API`;
+ - :term:`MC API`;
+ - :term:`RC API`; and
+ - :term:`V4L2 API`.
+
+ See :doc:`index`.
+
+ MC API
+ **Media Controller API**
+
+ An API designed to expose and control the relationships between
+ multimedia devices and sub-devices.
+
+ See :ref:`media_controller`.
+
+ MC-centric
+ :term:`V4L2 Hardware` device driver that requires :term:`MC API`.
+
+ Such drivers have ``V4L2_CAP_IO_MC`` device_caps field set
+ (see :ref:`VIDIOC_QUERYCAP`).
+
+ See :ref:`v4l2_hardware_control` for more details.
+
+ Media Hardware
+ Subset of the hardware that is supported by the Linux Media API.
+
+ This includes audio and video capture and playback hardware,
+ digital and analog TV, camera sensors, ISPs, remote controllers,
+ codecs, HDMI Consumer Electronics Control, HDMI capture, etc.
+
+ Microprocessor
+ Electronic circuitry that carries out the instructions of a
+ computer program by performing the basic arithmetic, logical,
+ control and input/output (I/O) operations specified by the
+ instructions on a single integrated circuit.
+
+ Peripheral
+ The same as :term:`Hardware Peripheral`.
+
+ RC API
+ **Remote Controller API**
+
+ An API designed to receive and transmit data from remote
+ controllers.
+
+ See :ref:`remote_controllers`.
+
+ SMBus
+ A subset of I²C, which defines a stricter usage of the bus.
+
+ SPI
+ **Serial Peripheral Interface Bus**
+
+ Synchronous serial communication interface specification used for
+ short distance communication, primarily in embedded systems.
+
+ SoC
+ **System on a Chip**
+
+ An integrated circuit that integrates all components of a computer
+ or other electronic systems.
+
+ V4L2 API
+ **V4L2 userspace API**
+
+ The userspace API defined in :ref:`v4l2spec`, which is used to
+ control a V4L2 hardware.
+
+ V4L2 Device Node
+ A :term:`Device Node` that is associated to a V4L driver.
+
+ The V4L2 device node naming is specified at :ref:`v4l2_device_naming`.
+
+ V4L2 Hardware
+ Part of the media hardware which is supported by the :term:`V4L2 API`.
+
+ V4L2 Sub-device
+ V4L2 hardware components that aren't controlled by a
+ :term:`Bridge Driver`. See :ref:`subdev`.
+
+ Video-node-centric
+ V4L2 device driver that doesn't require a media controller to be used.
+
+ Such drivers have the ``V4L2_CAP_IO_MC`` device_caps field unset
+ (see :ref:`VIDIOC_QUERYCAP`).
+
+ V4L2 Sub-device API
+ Part of the :term:`V4L2 API` which control
+ :term:`V4L2 sub-devices <V4L2 Sub-device>`, like sensors,
+ HDMI receivers, scalers, deinterlacers.
+
+ See :ref:`v4l2_hardware_control` for more details.
diff --git a/Documentation/userspace-api/media/index.rst b/Documentation/userspace-api/media/index.rst
index 70a3f3d..7f42f83 100644
--- a/Documentation/userspace-api/media/index.rst
+++ b/Documentation/userspace-api/media/index.rst
@@ -35,6 +35,9 @@
mediactl/media-controller
cec/cec-api
gen-errors
+
+ glossary
+
fdl-appendix
drivers/index
diff --git a/Documentation/userspace-api/media/mediactl/media-controller-intro.rst b/Documentation/userspace-api/media/mediactl/media-controller-intro.rst
index 1d06ea4..fce7eaf 100644
--- a/Documentation/userspace-api/media/mediactl/media-controller-intro.rst
+++ b/Documentation/userspace-api/media/mediactl/media-controller-intro.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _media-controller-intro:
diff --git a/Documentation/userspace-api/media/mediactl/media-controller-model.rst b/Documentation/userspace-api/media/mediactl/media-controller-model.rst
index 865e73d..222cb99 100644
--- a/Documentation/userspace-api/media/mediactl/media-controller-model.rst
+++ b/Documentation/userspace-api/media/mediactl/media-controller-model.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _media-controller-model:
diff --git a/Documentation/userspace-api/media/mediactl/media-controller.rst b/Documentation/userspace-api/media/mediactl/media-controller.rst
index 16bc3ab..508dd69 100644
--- a/Documentation/userspace-api/media/mediactl/media-controller.rst
+++ b/Documentation/userspace-api/media/mediactl/media-controller.rst
@@ -1,12 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. include:: <isonum.txt>
.. _media_controller:
diff --git a/Documentation/userspace-api/media/mediactl/media-func-close.rst b/Documentation/userspace-api/media/mediactl/media-func-close.rst
index ceec61c9..ec571b3 100644
--- a/Documentation/userspace-api/media/mediactl/media-func-close.rst
+++ b/Documentation/userspace-api/media/mediactl/media-func-close.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _media-func-close:
diff --git a/Documentation/userspace-api/media/mediactl/media-func-ioctl.rst b/Documentation/userspace-api/media/mediactl/media-func-ioctl.rst
index 629e7be..35ed549 100644
--- a/Documentation/userspace-api/media/mediactl/media-func-ioctl.rst
+++ b/Documentation/userspace-api/media/mediactl/media-func-ioctl.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _media-func-ioctl:
diff --git a/Documentation/userspace-api/media/mediactl/media-func-open.rst b/Documentation/userspace-api/media/mediactl/media-func-open.rst
index 4ade1cc..2c25951 100644
--- a/Documentation/userspace-api/media/mediactl/media-func-open.rst
+++ b/Documentation/userspace-api/media/mediactl/media-func-open.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _media-func-open:
diff --git a/Documentation/userspace-api/media/mediactl/media-funcs.rst b/Documentation/userspace-api/media/mediactl/media-funcs.rst
index 085e80e..e896296 100644
--- a/Documentation/userspace-api/media/mediactl/media-funcs.rst
+++ b/Documentation/userspace-api/media/mediactl/media-funcs.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _media-user-func:
diff --git a/Documentation/userspace-api/media/mediactl/media-header.rst b/Documentation/userspace-api/media/mediactl/media-header.rst
index 7ff9d24..c674271 100644
--- a/Documentation/userspace-api/media/mediactl/media-header.rst
+++ b/Documentation/userspace-api/media/mediactl/media-header.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _media_header:
diff --git a/Documentation/userspace-api/media/mediactl/media-ioc-device-info.rst b/Documentation/userspace-api/media/mediactl/media-ioc-device-info.rst
index 9c729bd..cde1ddf 100644
--- a/Documentation/userspace-api/media/mediactl/media-ioc-device-info.rst
+++ b/Documentation/userspace-api/media/mediactl/media-ioc-device-info.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _media_ioc_device_info:
diff --git a/Documentation/userspace-api/media/mediactl/media-ioc-enum-entities.rst b/Documentation/userspace-api/media/mediactl/media-ioc-enum-entities.rst
index 1d01de8..93e35f1 100644
--- a/Documentation/userspace-api/media/mediactl/media-ioc-enum-entities.rst
+++ b/Documentation/userspace-api/media/mediactl/media-ioc-enum-entities.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _media_ioc_enum_entities:
diff --git a/Documentation/userspace-api/media/mediactl/media-ioc-enum-links.rst b/Documentation/userspace-api/media/mediactl/media-ioc-enum-links.rst
index 9929b63..f3e94c7 100644
--- a/Documentation/userspace-api/media/mediactl/media-ioc-enum-links.rst
+++ b/Documentation/userspace-api/media/mediactl/media-ioc-enum-links.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _media_ioc_enum_links:
diff --git a/Documentation/userspace-api/media/mediactl/media-ioc-g-topology.rst b/Documentation/userspace-api/media/mediactl/media-ioc-g-topology.rst
index 54e3112..9b7d229 100644
--- a/Documentation/userspace-api/media/mediactl/media-ioc-g-topology.rst
+++ b/Documentation/userspace-api/media/mediactl/media-ioc-g-topology.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _media_ioc_g_topology:
diff --git a/Documentation/userspace-api/media/mediactl/media-ioc-request-alloc.rst b/Documentation/userspace-api/media/mediactl/media-ioc-request-alloc.rst
index 82f8646..ea05ff0 100644
--- a/Documentation/userspace-api/media/mediactl/media-ioc-request-alloc.rst
+++ b/Documentation/userspace-api/media/mediactl/media-ioc-request-alloc.rst
@@ -1,28 +1,4 @@
-.. This file is dual-licensed: you can use it either under the terms
-.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this
-.. dual licensing only applies to this file, and not this project as a
-.. whole.
-..
-.. a) This file is free software; you can redistribute it and/or
-.. modify it under the terms of the GNU General Public License as
-.. published by the Free Software Foundation version 2 of
-.. the License.
-..
-.. This file is distributed in the hope that it will be useful,
-.. but WITHOUT ANY WARRANTY; without even the implied warranty of
-.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-.. GNU General Public License for more details.
-..
-.. Or, alternatively,
-..
-.. b) Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later
.. _media_ioc_request_alloc:
diff --git a/Documentation/userspace-api/media/mediactl/media-ioc-setup-link.rst b/Documentation/userspace-api/media/mediactl/media-ioc-setup-link.rst
index 7da3d00..e2aa510 100644
--- a/Documentation/userspace-api/media/mediactl/media-ioc-setup-link.rst
+++ b/Documentation/userspace-api/media/mediactl/media-ioc-setup-link.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _media_ioc_setup_link:
diff --git a/Documentation/userspace-api/media/mediactl/media-request-ioc-queue.rst b/Documentation/userspace-api/media/mediactl/media-request-ioc-queue.rst
index ad55b6b..ca1b331 100644
--- a/Documentation/userspace-api/media/mediactl/media-request-ioc-queue.rst
+++ b/Documentation/userspace-api/media/mediactl/media-request-ioc-queue.rst
@@ -1,28 +1,4 @@
-.. This file is dual-licensed: you can use it either under the terms
-.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this
-.. dual licensing only applies to this file, and not this project as a
-.. whole.
-..
-.. a) This file is free software; you can redistribute it and/or
-.. modify it under the terms of the GNU General Public License as
-.. published by the Free Software Foundation version 2 of
-.. the License.
-..
-.. This file is distributed in the hope that it will be useful,
-.. but WITHOUT ANY WARRANTY; without even the implied warranty of
-.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-.. GNU General Public License for more details.
-..
-.. Or, alternatively,
-..
-.. b) Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later
.. _media_request_ioc_queue:
diff --git a/Documentation/userspace-api/media/mediactl/media-request-ioc-reinit.rst b/Documentation/userspace-api/media/mediactl/media-request-ioc-reinit.rst
index 4c43fa0..cfd503b 100644
--- a/Documentation/userspace-api/media/mediactl/media-request-ioc-reinit.rst
+++ b/Documentation/userspace-api/media/mediactl/media-request-ioc-reinit.rst
@@ -1,28 +1,4 @@
-.. This file is dual-licensed: you can use it either under the terms
-.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this
-.. dual licensing only applies to this file, and not this project as a
-.. whole.
-..
-.. a) This file is free software; you can redistribute it and/or
-.. modify it under the terms of the GNU General Public License as
-.. published by the Free Software Foundation version 2 of
-.. the License.
-..
-.. This file is distributed in the hope that it will be useful,
-.. but WITHOUT ANY WARRANTY; without even the implied warranty of
-.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-.. GNU General Public License for more details.
-..
-.. Or, alternatively,
-..
-.. b) Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later
.. _media_request_ioc_reinit:
diff --git a/Documentation/userspace-api/media/mediactl/media-types.rst b/Documentation/userspace-api/media/mediactl/media-types.rst
index 77fd4c0..7b24a21 100644
--- a/Documentation/userspace-api/media/mediactl/media-types.rst
+++ b/Documentation/userspace-api/media/mediactl/media-types.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _media-controller-types:
diff --git a/Documentation/userspace-api/media/mediactl/request-api.rst b/Documentation/userspace-api/media/mediactl/request-api.rst
index 37d9442..c0fa4db 100644
--- a/Documentation/userspace-api/media/mediactl/request-api.rst
+++ b/Documentation/userspace-api/media/mediactl/request-api.rst
@@ -1,28 +1,4 @@
-.. This file is dual-licensed: you can use it either under the terms
-.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this
-.. dual licensing only applies to this file, and not this project as a
-.. whole.
-..
-.. a) This file is free software; you can redistribute it and/or
-.. modify it under the terms of the GNU General Public License as
-.. published by the Free Software Foundation version 2 of
-.. the License.
-..
-.. This file is distributed in the hope that it will be useful,
-.. but WITHOUT ANY WARRANTY; without even the implied warranty of
-.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-.. GNU General Public License for more details.
-..
-.. Or, alternatively,
-..
-.. b) Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later
.. _media-request-api:
diff --git a/Documentation/userspace-api/media/mediactl/request-func-close.rst b/Documentation/userspace-api/media/mediactl/request-func-close.rst
index 9618b51..04e00bb 100644
--- a/Documentation/userspace-api/media/mediactl/request-func-close.rst
+++ b/Documentation/userspace-api/media/mediactl/request-func-close.rst
@@ -1,28 +1,4 @@
-.. This file is dual-licensed: you can use it either under the terms
-.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this
-.. dual licensing only applies to this file, and not this project as a
-.. whole.
-..
-.. a) This file is free software; you can redistribute it and/or
-.. modify it under the terms of the GNU General Public License as
-.. published by the Free Software Foundation version 2 of
-.. the License.
-..
-.. This file is distributed in the hope that it will be useful,
-.. but WITHOUT ANY WARRANTY; without even the implied warranty of
-.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-.. GNU General Public License for more details.
-..
-.. Or, alternatively,
-..
-.. b) Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later
.. _request-func-close:
diff --git a/Documentation/userspace-api/media/mediactl/request-func-ioctl.rst b/Documentation/userspace-api/media/mediactl/request-func-ioctl.rst
index 4bf9852..1e1c5ed 100644
--- a/Documentation/userspace-api/media/mediactl/request-func-ioctl.rst
+++ b/Documentation/userspace-api/media/mediactl/request-func-ioctl.rst
@@ -1,28 +1,4 @@
-.. This file is dual-licensed: you can use it either under the terms
-.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this
-.. dual licensing only applies to this file, and not this project as a
-.. whole.
-..
-.. a) This file is free software; you can redistribute it and/or
-.. modify it under the terms of the GNU General Public License as
-.. published by the Free Software Foundation version 2 of
-.. the License.
-..
-.. This file is distributed in the hope that it will be useful,
-.. but WITHOUT ANY WARRANTY; without even the implied warranty of
-.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-.. GNU General Public License for more details.
-..
-.. Or, alternatively,
-..
-.. b) Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later
.. _request-func-ioctl:
diff --git a/Documentation/userspace-api/media/mediactl/request-func-poll.rst b/Documentation/userspace-api/media/mediactl/request-func-poll.rst
index 85a3427..9294721 100644
--- a/Documentation/userspace-api/media/mediactl/request-func-poll.rst
+++ b/Documentation/userspace-api/media/mediactl/request-func-poll.rst
@@ -1,28 +1,4 @@
-.. This file is dual-licensed: you can use it either under the terms
-.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this
-.. dual licensing only applies to this file, and not this project as a
-.. whole.
-..
-.. a) This file is free software; you can redistribute it and/or
-.. modify it under the terms of the GNU General Public License as
-.. published by the Free Software Foundation version 2 of
-.. the License.
-..
-.. This file is distributed in the hope that it will be useful,
-.. but WITHOUT ANY WARRANTY; without even the implied warranty of
-.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-.. GNU General Public License for more details.
-..
-.. Or, alternatively,
-..
-.. b) Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later
.. _request-func-poll:
diff --git a/Documentation/userspace-api/media/rc/keytable.c.rst b/Documentation/userspace-api/media/rc/keytable.c.rst
index 901d33d..0b50cfaf 100644
--- a/Documentation/userspace-api/media/rc/keytable.c.rst
+++ b/Documentation/userspace-api/media/rc/keytable.c.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
file: uapi/v4l/keytable.c
=========================
diff --git a/Documentation/userspace-api/media/rc/lirc-dev-intro.rst b/Documentation/userspace-api/media/rc/lirc-dev-intro.rst
index 0c3d70d..167b354 100644
--- a/Documentation/userspace-api/media/rc/lirc-dev-intro.rst
+++ b/Documentation/userspace-api/media/rc/lirc-dev-intro.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _lirc_dev_intro:
diff --git a/Documentation/userspace-api/media/rc/lirc-dev.rst b/Documentation/userspace-api/media/rc/lirc-dev.rst
index 7a395fa..5510dc0 100644
--- a/Documentation/userspace-api/media/rc/lirc-dev.rst
+++ b/Documentation/userspace-api/media/rc/lirc-dev.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _lirc_dev:
diff --git a/Documentation/userspace-api/media/rc/lirc-func.rst b/Documentation/userspace-api/media/rc/lirc-func.rst
index e37c995..420a3db 100644
--- a/Documentation/userspace-api/media/rc/lirc-func.rst
+++ b/Documentation/userspace-api/media/rc/lirc-func.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _lirc_func:
diff --git a/Documentation/userspace-api/media/rc/lirc-get-features.rst b/Documentation/userspace-api/media/rc/lirc-get-features.rst
index f4b9ca0..6846ae9 100644
--- a/Documentation/userspace-api/media/rc/lirc-get-features.rst
+++ b/Documentation/userspace-api/media/rc/lirc-get-features.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _lirc_get_features:
diff --git a/Documentation/userspace-api/media/rc/lirc-get-rec-mode.rst b/Documentation/userspace-api/media/rc/lirc-get-rec-mode.rst
index 674ce16..e8f397a 100644
--- a/Documentation/userspace-api/media/rc/lirc-get-rec-mode.rst
+++ b/Documentation/userspace-api/media/rc/lirc-get-rec-mode.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _lirc_get_rec_mode:
.. _lirc_set_rec_mode:
diff --git a/Documentation/userspace-api/media/rc/lirc-get-rec-resolution.rst b/Documentation/userspace-api/media/rc/lirc-get-rec-resolution.rst
index f20b5bf..3f08aa7 100644
--- a/Documentation/userspace-api/media/rc/lirc-get-rec-resolution.rst
+++ b/Documentation/userspace-api/media/rc/lirc-get-rec-resolution.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _lirc_get_rec_resolution:
diff --git a/Documentation/userspace-api/media/rc/lirc-get-send-mode.rst b/Documentation/userspace-api/media/rc/lirc-get-send-mode.rst
index 973a47b..f93b30c 100644
--- a/Documentation/userspace-api/media/rc/lirc-get-send-mode.rst
+++ b/Documentation/userspace-api/media/rc/lirc-get-send-mode.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _lirc_get_send_mode:
.. _lirc_set_send_mode:
diff --git a/Documentation/userspace-api/media/rc/lirc-get-timeout.rst b/Documentation/userspace-api/media/rc/lirc-get-timeout.rst
index 5db8409..ec191a3 100644
--- a/Documentation/userspace-api/media/rc/lirc-get-timeout.rst
+++ b/Documentation/userspace-api/media/rc/lirc-get-timeout.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _lirc_get_min_timeout:
.. _lirc_get_max_timeout:
diff --git a/Documentation/userspace-api/media/rc/lirc-header.rst b/Documentation/userspace-api/media/rc/lirc-header.rst
index c7e0716..8bd0acc 100644
--- a/Documentation/userspace-api/media/rc/lirc-header.rst
+++ b/Documentation/userspace-api/media/rc/lirc-header.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _lirc_header:
diff --git a/Documentation/userspace-api/media/rc/lirc-read.rst b/Documentation/userspace-api/media/rc/lirc-read.rst
index 13f7f53..b94a349 100644
--- a/Documentation/userspace-api/media/rc/lirc-read.rst
+++ b/Documentation/userspace-api/media/rc/lirc-read.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _lirc-read:
diff --git a/Documentation/userspace-api/media/rc/lirc-set-measure-carrier-mode.rst b/Documentation/userspace-api/media/rc/lirc-set-measure-carrier-mode.rst
index 4cf9472..820d6bf 100644
--- a/Documentation/userspace-api/media/rc/lirc-set-measure-carrier-mode.rst
+++ b/Documentation/userspace-api/media/rc/lirc-set-measure-carrier-mode.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _lirc_set_measure_carrier_mode:
diff --git a/Documentation/userspace-api/media/rc/lirc-set-rec-carrier-range.rst b/Documentation/userspace-api/media/rc/lirc-set-rec-carrier-range.rst
index 0439e93..e33e6a3 100644
--- a/Documentation/userspace-api/media/rc/lirc-set-rec-carrier-range.rst
+++ b/Documentation/userspace-api/media/rc/lirc-set-rec-carrier-range.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _lirc_set_rec_carrier_range:
diff --git a/Documentation/userspace-api/media/rc/lirc-set-rec-carrier.rst b/Documentation/userspace-api/media/rc/lirc-set-rec-carrier.rst
index f4d1889..a6784d5 100644
--- a/Documentation/userspace-api/media/rc/lirc-set-rec-carrier.rst
+++ b/Documentation/userspace-api/media/rc/lirc-set-rec-carrier.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _lirc_set_rec_carrier:
diff --git a/Documentation/userspace-api/media/rc/lirc-set-rec-timeout-reports.rst b/Documentation/userspace-api/media/rc/lirc-set-rec-timeout-reports.rst
index ab97f87f..55be65d 100644
--- a/Documentation/userspace-api/media/rc/lirc-set-rec-timeout-reports.rst
+++ b/Documentation/userspace-api/media/rc/lirc-set-rec-timeout-reports.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _lirc_set_rec_timeout_reports:
diff --git a/Documentation/userspace-api/media/rc/lirc-set-rec-timeout.rst b/Documentation/userspace-api/media/rc/lirc-set-rec-timeout.rst
index 227776c..e91a0da 100644
--- a/Documentation/userspace-api/media/rc/lirc-set-rec-timeout.rst
+++ b/Documentation/userspace-api/media/rc/lirc-set-rec-timeout.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _lirc_set_rec_timeout:
.. _lirc_get_rec_timeout:
diff --git a/Documentation/userspace-api/media/rc/lirc-set-send-carrier.rst b/Documentation/userspace-api/media/rc/lirc-set-send-carrier.rst
index 7eaf2b9..e199aac 100644
--- a/Documentation/userspace-api/media/rc/lirc-set-send-carrier.rst
+++ b/Documentation/userspace-api/media/rc/lirc-set-send-carrier.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _lirc_set_send_carrier:
diff --git a/Documentation/userspace-api/media/rc/lirc-set-send-duty-cycle.rst b/Documentation/userspace-api/media/rc/lirc-set-send-duty-cycle.rst
index 0dee893..a9074f4 100644
--- a/Documentation/userspace-api/media/rc/lirc-set-send-duty-cycle.rst
+++ b/Documentation/userspace-api/media/rc/lirc-set-send-duty-cycle.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _lirc_set_send_duty_cycle:
diff --git a/Documentation/userspace-api/media/rc/lirc-set-transmitter-mask.rst b/Documentation/userspace-api/media/rc/lirc-set-transmitter-mask.rst
index dcee4b7..1f55274 100644
--- a/Documentation/userspace-api/media/rc/lirc-set-transmitter-mask.rst
+++ b/Documentation/userspace-api/media/rc/lirc-set-transmitter-mask.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _lirc_set_transmitter_mask:
diff --git a/Documentation/userspace-api/media/rc/lirc-set-wideband-receiver.rst b/Documentation/userspace-api/media/rc/lirc-set-wideband-receiver.rst
index 22f6fe4..2c43b62 100644
--- a/Documentation/userspace-api/media/rc/lirc-set-wideband-receiver.rst
+++ b/Documentation/userspace-api/media/rc/lirc-set-wideband-receiver.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _lirc_set_wideband_receiver:
diff --git a/Documentation/userspace-api/media/rc/lirc-write.rst b/Documentation/userspace-api/media/rc/lirc-write.rst
index 96ca4a22..421de2c 100644
--- a/Documentation/userspace-api/media/rc/lirc-write.rst
+++ b/Documentation/userspace-api/media/rc/lirc-write.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _lirc-write:
diff --git a/Documentation/userspace-api/media/rc/rc-intro.rst b/Documentation/userspace-api/media/rc/rc-intro.rst
index 14e8515..1338478 100644
--- a/Documentation/userspace-api/media/rc/rc-intro.rst
+++ b/Documentation/userspace-api/media/rc/rc-intro.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _Remote_controllers_Intro:
diff --git a/Documentation/userspace-api/media/rc/rc-protos.rst b/Documentation/userspace-api/media/rc/rc-protos.rst
index b250ebe3..2e29058 100644
--- a/Documentation/userspace-api/media/rc/rc-protos.rst
+++ b/Documentation/userspace-api/media/rc/rc-protos.rst
@@ -1,6 +1,4 @@
-.. SPDX-License-Identifier: GPL-2.0
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _Remote_controllers_Protocols:
diff --git a/Documentation/userspace-api/media/rc/rc-sysfs-nodes.rst b/Documentation/userspace-api/media/rc/rc-sysfs-nodes.rst
index 73dd75f..43c4426 100644
--- a/Documentation/userspace-api/media/rc/rc-sysfs-nodes.rst
+++ b/Documentation/userspace-api/media/rc/rc-sysfs-nodes.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _remote_controllers_sysfs_nodes:
diff --git a/Documentation/userspace-api/media/rc/rc-table-change.rst b/Documentation/userspace-api/media/rc/rc-table-change.rst
index f5d00a2..61c77b0 100644
--- a/Documentation/userspace-api/media/rc/rc-table-change.rst
+++ b/Documentation/userspace-api/media/rc/rc-table-change.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _Remote_controllers_table_change:
diff --git a/Documentation/userspace-api/media/rc/rc-tables.rst b/Documentation/userspace-api/media/rc/rc-tables.rst
index 33b724b..8dc1165 100644
--- a/Documentation/userspace-api/media/rc/rc-tables.rst
+++ b/Documentation/userspace-api/media/rc/rc-tables.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _Remote_controllers_tables:
diff --git a/Documentation/userspace-api/media/rc/remote_controllers.rst b/Documentation/userspace-api/media/rc/remote_controllers.rst
index 3ab2d6d..2d9078a 100644
--- a/Documentation/userspace-api/media/rc/remote_controllers.rst
+++ b/Documentation/userspace-api/media/rc/remote_controllers.rst
@@ -1,12 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
-
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. include:: <isonum.txt>
.. _remote_controllers:
diff --git a/Documentation/userspace-api/media/typical_media_device.svg b/Documentation/userspace-api/media/typical_media_device.svg
index 3420341..fca7af8 100644
--- a/Documentation/userspace-api/media/typical_media_device.svg
+++ b/Documentation/userspace-api/media/typical_media_device.svg
@@ -1,14 +1,5 @@
<?xml version="1.0" encoding="UTF-8"?>
-<!--
- Permission is granted to copy, distribute and/or modify this
- document under the terms of the GNU Free Documentation License,
- Version 1.1 or any later version published by the Free Software
- Foundation, with no Invariant Sections, no Front-Cover Texts
- and no Back-Cover Texts. A copy of the license is included at
- Documentation/userspace-api/media/fdl-appendix.rst.
-
- TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
--->
+<!-- SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later -->
<svg id="svg2" width="235mm" height="179mm" clip-path="url(#a)" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" preserveAspectRatio="xMidYMid" version="1.2" viewBox="0 0 22648.239 17899.829" xml:space="preserve" xmlns="http://www.w3.org/2000/svg" xmlns:cc="http://creativecommons.org/ns#" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"><metadata id="metadata1533"><rdf:RDF><cc:Work rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type rdf:resource="http://purl.org/dc/dcmitype/StillImage"/><dc:title/></cc:Work></rdf:RDF></metadata><defs id="defs4"><clipPath id="a"><rect id="rect7" width="28000" height="21000"/></clipPath></defs><path id="path11" d="m10146 2636c-518.06 0-1035.1 515-1035.1 1031v4124c0 516 517.06 1032 1035.1 1032h8572.2c518.06 0 1036.1-516 1036.1-1032v-4124c0-516-518.06-1031-1036.1-1031h-8572.2z"
fill="#fcf" style=""/><path id="path15" d="m1505.5 13443c-293 0-585 292-585 585v2340c0 293 292 586 585 586h3275c293 0 586-293 586-586v-2340c0-293-293-585-586-585h-3275z" fill="#ffc" style=""/><path id="path19" d="m517.15 22.013c-461 0-922 461-922 922v11169c0 461 461 923 922 923h3692c461 0 922-462 922-923v-11169c0-461-461-922-922-922h-3692z" fill="#e6e6e6" style=""/><path id="path23" d="m2371.5 6438h-2260v-1086h4520v1086h-2260z" fill="#ff8080" style=""/><path id="path25" d="m2371.5 6438h-2260v-1086h4520v1086h-2260z" fill="none" stroke="#3465af" style=""/><text id="text27" class="TextShape" x="-2089.4541" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan29" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan31" class="TextPosition" x="489.5459" y="6111.0132" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan33"
fill="#000000" font-family="Serif, serif" font-size="493.88px">Audio decoder</tspan></tspan></tspan></text>
diff --git a/Documentation/userspace-api/media/v4l/app-pri.rst b/Documentation/userspace-api/media/v4l/app-pri.rst
index 5018ede..626a42f 100644
--- a/Documentation/userspace-api/media/v4l/app-pri.rst
+++ b/Documentation/userspace-api/media/v4l/app-pri.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _app-pri:
diff --git a/Documentation/userspace-api/media/v4l/async.rst b/Documentation/userspace-api/media/v4l/async.rst
index 8bc4a72..d6960ff 100644
--- a/Documentation/userspace-api/media/v4l/async.rst
+++ b/Documentation/userspace-api/media/v4l/async.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _async:
diff --git a/Documentation/userspace-api/media/v4l/audio.rst b/Documentation/userspace-api/media/v4l/audio.rst
index d6bb850..17f0b1c 100644
--- a/Documentation/userspace-api/media/v4l/audio.rst
+++ b/Documentation/userspace-api/media/v4l/audio.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _audio:
diff --git a/Documentation/userspace-api/media/v4l/bayer.svg b/Documentation/userspace-api/media/v4l/bayer.svg
index 82e805c..c500a28 100644
--- a/Documentation/userspace-api/media/v4l/bayer.svg
+++ b/Documentation/userspace-api/media/v4l/bayer.svg
@@ -1,31 +1,5 @@
<?xml version="1.0" encoding="UTF-8"?>
-<!--
- This file is dual-licensed: you can use it either under the terms
- of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this
- dual licensing only applies to this file, and not this project as a
- whole.
-
- a) This file is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation version 2 of
- the License.
-
- This file is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- Or, alternatively,
-
- b) Permission is granted to copy, distribute and/or modify this
- document under the terms of the GNU Free Documentation License,
- Version 1.1 or any later version published by the Free Software
- Foundation, with no Invariant Sections, no Front-Cover Texts
- and no Back-Cover Texts. A copy of the license is included at
- Documentation/userspace-api/media/fdl-appendix.rst.
-
- TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
--->
+<!-- SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later -->
<svg id="svg2" width="164.15mm" height="46.771mm" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" preserveAspectRatio="xMidYMid" version="1.2" viewBox="0 0 16415.333 4677.1107" xml:space="preserve" xmlns="http://www.w3.org/2000/svg" xmlns:cc="http://creativecommons.org/ns#" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"><metadata id="metadata652"><rdf:RDF><cc:Work rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type rdf:resource="http://purl.org/dc/dcmitype/StillImage"/><dc:title/></cc:Work></rdf:RDF></metadata><g id="g186" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id6"><rect id="rect189" class="BoundingBox" x="3299" y="3199" width="1303" height="1203" fill="none"/><path id="path191" d="m3950 4400h-650v-1200h1300v1200h-650z" fill="#00f"/><path id="path193" d="m3950
4400h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text195" class="TextShape"><tspan id="tspan197" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan199" class="TextPosition" x="3739" y="4021"><tspan id="tspan201" fill="#ffffff">B</tspan></tspan></tspan></text>
</g></g><g id="g203" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id7"><rect id="rect206" class="BoundingBox" x="4599" y="3199" width="1303" height="1203" fill="none"/><path id="path208" d="m5250 4400h-650v-1200h1300v1200h-650z" fill="#0c0"/><path id="path210" d="m5250 4400h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text212" class="TextShape"><tspan id="tspan214" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan216" class="TextPosition" x="5003" y="4021"><tspan id="tspan218" fill="#ffffff">G</tspan></tspan></tspan></text>
diff --git a/Documentation/userspace-api/media/v4l/biblio.rst b/Documentation/userspace-api/media/v4l/biblio.rst
index 3c96341..7869b6f 100644
--- a/Documentation/userspace-api/media/v4l/biblio.rst
+++ b/Documentation/userspace-api/media/v4l/biblio.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
**********
References
diff --git a/Documentation/userspace-api/media/v4l/buffer.rst b/Documentation/userspace-api/media/v4l/buffer.rst
index 2044ed1..4f95496 100644
--- a/Documentation/userspace-api/media/v4l/buffer.rst
+++ b/Documentation/userspace-api/media/v4l/buffer.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _buffer:
diff --git a/Documentation/userspace-api/media/v4l/capture-example.rst b/Documentation/userspace-api/media/v4l/capture-example.rst
index 6aa67c5..2589132 100644
--- a/Documentation/userspace-api/media/v4l/capture-example.rst
+++ b/Documentation/userspace-api/media/v4l/capture-example.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _capture-example:
diff --git a/Documentation/userspace-api/media/v4l/capture.c.rst b/Documentation/userspace-api/media/v4l/capture.c.rst
index 30f7c81..ccbd52c 100644
--- a/Documentation/userspace-api/media/v4l/capture.c.rst
+++ b/Documentation/userspace-api/media/v4l/capture.c.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
file: media/v4l/capture.c
=========================
diff --git a/Documentation/userspace-api/media/v4l/colorspaces-defs.rst b/Documentation/userspace-api/media/v4l/colorspaces-defs.rst
index 01404e1..fe9f8aa 100644
--- a/Documentation/userspace-api/media/v4l/colorspaces-defs.rst
+++ b/Documentation/userspace-api/media/v4l/colorspaces-defs.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
****************************
Defining Colorspaces in V4L2
@@ -36,8 +29,7 @@
:c:type:`v4l2_hsv_encoding` specifies which encoding is used.
.. note:: The default R'G'B' quantization is full range for all
- colorspaces except for BT.2020 which uses limited range R'G'B'
- quantization.
+ colorspaces. HSV formats are always full range.
.. tabularcolumns:: |p{6.7cm}|p{10.8cm}|
@@ -169,8 +161,8 @@
- Details
* - ``V4L2_QUANTIZATION_DEFAULT``
- Use the default quantization encoding as defined by the
- colorspace. This is always full range for R'G'B' (except for the
- BT.2020 colorspace) and HSV. It is usually limited range for Y'CbCr.
+ colorspace. This is always full range for R'G'B' and HSV.
+ It is usually limited range for Y'CbCr.
* - ``V4L2_QUANTIZATION_FULL_RANGE``
- Use the full range quantization encoding. I.e. the range [0…1] is
mapped to [0…255] (with possible clipping to [1…254] to avoid the
@@ -180,4 +172,4 @@
* - ``V4L2_QUANTIZATION_LIM_RANGE``
- Use the limited range quantization encoding. I.e. the range [0…1]
is mapped to [16…235]. Cb and Cr are mapped from [-0.5…0.5] to
- [16…240].
+ [16…240]. Limited Range cannot be used with HSV.
diff --git a/Documentation/userspace-api/media/v4l/colorspaces-details.rst b/Documentation/userspace-api/media/v4l/colorspaces-details.rst
index 300c5d2..014e7c9 100644
--- a/Documentation/userspace-api/media/v4l/colorspaces-details.rst
+++ b/Documentation/userspace-api/media/v4l/colorspaces-details.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
********************************
Detailed Colorspace Descriptions
@@ -377,9 +370,8 @@
The :ref:`itu2020` standard defines the colorspace used by Ultra-high
definition television (UHDTV). The default transfer function is
``V4L2_XFER_FUNC_709``. The default Y'CbCr encoding is
-``V4L2_YCBCR_ENC_BT2020``. The default R'G'B' quantization is limited
-range (!), and so is the default Y'CbCr quantization. The chromaticities
-of the primary colors and the white reference are:
+``V4L2_YCBCR_ENC_BT2020``. The default Y'CbCr quantization is limited range.
+The chromaticities of the primary colors and the white reference are:
diff --git a/Documentation/userspace-api/media/v4l/colorspaces.rst b/Documentation/userspace-api/media/v4l/colorspaces.rst
index 0846df9..2aa0dda 100644
--- a/Documentation/userspace-api/media/v4l/colorspaces.rst
+++ b/Documentation/userspace-api/media/v4l/colorspaces.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _colorspaces:
diff --git a/Documentation/userspace-api/media/v4l/common-defs.rst b/Documentation/userspace-api/media/v4l/common-defs.rst
index 370a1e3..6ae42ac 100644
--- a/Documentation/userspace-api/media/v4l/common-defs.rst
+++ b/Documentation/userspace-api/media/v4l/common-defs.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _common-defs:
diff --git a/Documentation/userspace-api/media/v4l/common.rst b/Documentation/userspace-api/media/v4l/common.rst
index 7d81c58..d84aeb7 100644
--- a/Documentation/userspace-api/media/v4l/common.rst
+++ b/Documentation/userspace-api/media/v4l/common.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _common:
diff --git a/Documentation/userspace-api/media/v4l/compat.rst b/Documentation/userspace-api/media/v4l/compat.rst
index 055286b..b63b839 100644
--- a/Documentation/userspace-api/media/v4l/compat.rst
+++ b/Documentation/userspace-api/media/v4l/compat.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _compat:
diff --git a/Documentation/userspace-api/media/v4l/constraints.svg b/Documentation/userspace-api/media/v4l/constraints.svg
index 1dfe51a..ac5f82b 100644
--- a/Documentation/userspace-api/media/v4l/constraints.svg
+++ b/Documentation/userspace-api/media/v4l/constraints.svg
@@ -1,31 +1,5 @@
<?xml version="1.0" encoding="UTF-8"?>
-<!--
- This file is dual-licensed: you can use it either under the terms
- of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this
- dual licensing only applies to this file, and not this project as a
- whole.
-
- a) This file is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation version 2 of
- the License.
-
- This file is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- Or, alternatively,
-
- b) Permission is granted to copy, distribute and/or modify this
- document under the terms of the GNU Free Documentation License,
- Version 1.1 or any later version published by the Free Software
- Foundation, with no Invariant Sections, no Front-Cover Texts
- and no Back-Cover Texts. A copy of the license is included at
- Documentation/userspace-api/media/fdl-appendix.rst.
-
- TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
--->
+<!-- SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later -->
<svg id="svg2" width="249.01mm" height="143.01mm" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" preserveAspectRatio="xMidYMid" version="1.2" viewBox="0 0 24900.998 14300.999" xml:space="preserve" xmlns="http://www.w3.org/2000/svg" xmlns:cc="http://creativecommons.org/ns#" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"><metadata id="metadata325"><rdf:RDF><cc:Work rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type rdf:resource="http://purl.org/dc/dcmitype/StillImage"/><dc:title/></cc:Work></rdf:RDF></metadata><defs id="defs4" class="ClipPathGroup"><marker id="marker6261" overflow="visible" orient="auto"><path id="path6263" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#f00" fill-rule="evenodd" stroke="#f00" stroke-width="1pt"/></marker><marker id="marker6125" overflow="visible"
orient="auto"><path id="path6127" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#f00" fill-rule="evenodd" stroke="#f00" stroke-width="1pt"/></marker><marker id="marker6001" overflow="visible" orient="auto"><path id="path6003" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#f00" fill-rule="evenodd" stroke="#f00" stroke-width="1pt"/></marker><marker id="marker5693" overflow="visible" orient="auto"><path id="path5695" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#f00" fill-rule="evenodd" stroke="#f00" stroke-width="1pt"/></marker><marker id="marker5575" overflow="visible" orient="auto"><path id="path5577" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#000080" fill-rule="evenodd" stroke="#000080" stroke-width="1pt"/></marker><marker id="marker5469" overflow="visible"
orient="auto"><path id="path5471" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#000080" fill-rule="evenodd" stroke="#000080" stroke-width="1pt"/></marker><marker id="marker5259" overflow="visible" orient="auto"><path id="path5261" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#000080" fill-rule="evenodd" stroke="#000080" stroke-width="1pt"/></marker><marker id="Arrow2Mend" overflow="visible" orient="auto"><path id="path4241" transform="scale(-.6)" d="m8.7186 4.0337-10.926-4.0177 10.926-4.0177c-1.7455 2.3721-1.7354 5.6175-6e-7 8.0354z" fill="#000080" fill-rule="evenodd" stroke="#000080" stroke-linejoin="round" stroke-width=".625"/></marker></defs><g id="g204" class="com.sun.star.drawing.CustomShape" transform="translate(-1350,-3250)"><g id="id6"><rect id="rect207" class="BoundingBox" x="1350" y="3250" width="24901" height="14301"
diff --git a/Documentation/userspace-api/media/v4l/control.rst b/Documentation/userspace-api/media/v4l/control.rst
index 3e991c1..4e5652e 100644
--- a/Documentation/userspace-api/media/v4l/control.rst
+++ b/Documentation/userspace-api/media/v4l/control.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _control:
diff --git a/Documentation/userspace-api/media/v4l/crop.rst b/Documentation/userspace-api/media/v4l/crop.rst
index cb7e234..3fe185e 100644
--- a/Documentation/userspace-api/media/v4l/crop.rst
+++ b/Documentation/userspace-api/media/v4l/crop.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _crop:
diff --git a/Documentation/userspace-api/media/v4l/crop.svg b/Documentation/userspace-api/media/v4l/crop.svg
index 4cd47f9..5483227 100644
--- a/Documentation/userspace-api/media/v4l/crop.svg
+++ b/Documentation/userspace-api/media/v4l/crop.svg
@@ -1,14 +1,5 @@
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<!--
- Permission is granted to copy, distribute and/or modify this
- document under the terms of the GNU Free Documentation License,
- Version 1.1 or any later version published by the Free Software
- Foundation, with no Invariant Sections, no Front-Cover Texts
- and no Back-Cover Texts. A copy of the license is included at
- Documentation/userspace-api/media/fdl-appendix.rst.
-
- TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
--->
+<!-- SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later -->
<svg
xmlns:dc="http://purl.org/dc/elements/1.1/"
xmlns:cc="http://creativecommons.org/ns#"
diff --git a/Documentation/userspace-api/media/v4l/depth-formats.rst b/Documentation/userspace-api/media/v4l/depth-formats.rst
index 6742486..b4f3fc2 100644
--- a/Documentation/userspace-api/media/v4l/depth-formats.rst
+++ b/Documentation/userspace-api/media/v4l/depth-formats.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _depth-formats:
diff --git a/Documentation/userspace-api/media/v4l/dev-capture.rst b/Documentation/userspace-api/media/v4l/dev-capture.rst
index 44d3094..5ea1ffe 100644
--- a/Documentation/userspace-api/media/v4l/dev-capture.rst
+++ b/Documentation/userspace-api/media/v4l/dev-capture.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _capture:
diff --git a/Documentation/userspace-api/media/v4l/dev-encoder.rst b/Documentation/userspace-api/media/v4l/dev-encoder.rst
index fb44f20..aa338b9 100644
--- a/Documentation/userspace-api/media/v4l/dev-encoder.rst
+++ b/Documentation/userspace-api/media/v4l/dev-encoder.rst
@@ -1,28 +1,4 @@
-.. This file is dual-licensed: you can use it either under the terms
-.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this
-.. dual licensing only applies to this file, and not this project as a
-.. whole.
-..
-.. a) This file is free software; you can redistribute it and/or
-.. modify it under the terms of the GNU General Public License as
-.. published by the Free Software Foundation version 2 of
-.. the License.
-..
-.. This file is distributed in the hope that it will be useful,
-.. but WITHOUT ANY WARRANTY; without even the implied warranty of
-.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-.. GNU General Public License for more details.
-..
-.. Or, alternatively,
-..
-.. b) Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later
.. _encoder:
diff --git a/Documentation/userspace-api/media/v4l/dev-event.rst b/Documentation/userspace-api/media/v4l/dev-event.rst
index d09034f..f34f9cf 100644
--- a/Documentation/userspace-api/media/v4l/dev-event.rst
+++ b/Documentation/userspace-api/media/v4l/dev-event.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _event:
diff --git a/Documentation/userspace-api/media/v4l/dev-mem2mem.rst b/Documentation/userspace-api/media/v4l/dev-mem2mem.rst
index 40aff9c..d8db468 100644
--- a/Documentation/userspace-api/media/v4l/dev-mem2mem.rst
+++ b/Documentation/userspace-api/media/v4l/dev-mem2mem.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _mem2mem:
diff --git a/Documentation/userspace-api/media/v4l/dev-meta.rst b/Documentation/userspace-api/media/v4l/dev-meta.rst
index 6d2c5a7..8ec3a73 100644
--- a/Documentation/userspace-api/media/v4l/dev-meta.rst
+++ b/Documentation/userspace-api/media/v4l/dev-meta.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _metadata:
diff --git a/Documentation/userspace-api/media/v4l/dev-osd.rst b/Documentation/userspace-api/media/v4l/dev-osd.rst
index ad0c156..8e4be91 100644
--- a/Documentation/userspace-api/media/v4l/dev-osd.rst
+++ b/Documentation/userspace-api/media/v4l/dev-osd.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _osd:
diff --git a/Documentation/userspace-api/media/v4l/dev-output.rst b/Documentation/userspace-api/media/v4l/dev-output.rst
index e4f2a1d..2315faf 100644
--- a/Documentation/userspace-api/media/v4l/dev-output.rst
+++ b/Documentation/userspace-api/media/v4l/dev-output.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _output:
diff --git a/Documentation/userspace-api/media/v4l/dev-overlay.rst b/Documentation/userspace-api/media/v4l/dev-overlay.rst
index 7246d56..07cc925 100644
--- a/Documentation/userspace-api/media/v4l/dev-overlay.rst
+++ b/Documentation/userspace-api/media/v4l/dev-overlay.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _overlay:
diff --git a/Documentation/userspace-api/media/v4l/dev-radio.rst b/Documentation/userspace-api/media/v4l/dev-radio.rst
index c0edd7b..284ce96 100644
--- a/Documentation/userspace-api/media/v4l/dev-radio.rst
+++ b/Documentation/userspace-api/media/v4l/dev-radio.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _radio:
diff --git a/Documentation/userspace-api/media/v4l/dev-raw-vbi.rst b/Documentation/userspace-api/media/v4l/dev-raw-vbi.rst
index 0307d44..bb52f85 100644
--- a/Documentation/userspace-api/media/v4l/dev-raw-vbi.rst
+++ b/Documentation/userspace-api/media/v4l/dev-raw-vbi.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _raw-vbi:
diff --git a/Documentation/userspace-api/media/v4l/dev-rds.rst b/Documentation/userspace-api/media/v4l/dev-rds.rst
index 13dba4a..463726b 100644
--- a/Documentation/userspace-api/media/v4l/dev-rds.rst
+++ b/Documentation/userspace-api/media/v4l/dev-rds.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _rds:
diff --git a/Documentation/userspace-api/media/v4l/dev-sdr.rst b/Documentation/userspace-api/media/v4l/dev-sdr.rst
index 4a80319..80b25a7 100644
--- a/Documentation/userspace-api/media/v4l/dev-sdr.rst
+++ b/Documentation/userspace-api/media/v4l/dev-sdr.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _sdr:
diff --git a/Documentation/userspace-api/media/v4l/dev-sliced-vbi.rst b/Documentation/userspace-api/media/v4l/dev-sliced-vbi.rst
index dd0b664..807751f 100644
--- a/Documentation/userspace-api/media/v4l/dev-sliced-vbi.rst
+++ b/Documentation/userspace-api/media/v4l/dev-sliced-vbi.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _sliced:
@@ -127,7 +120,7 @@
:stub-columns: 0
:widths: 3 3 2 2 2
- * - __u32
+ * - __u16
- ``service_set``
- :cspan:`2`
diff --git a/Documentation/userspace-api/media/v4l/dev-subdev.rst b/Documentation/userspace-api/media/v4l/dev-subdev.rst
index 134d2fb..2aa8157 100644
--- a/Documentation/userspace-api/media/v4l/dev-subdev.rst
+++ b/Documentation/userspace-api/media/v4l/dev-subdev.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _subdev:
diff --git a/Documentation/userspace-api/media/v4l/dev-touch.rst b/Documentation/userspace-api/media/v4l/dev-touch.rst
index c1ce446..a71b9de 100644
--- a/Documentation/userspace-api/media/v4l/dev-touch.rst
+++ b/Documentation/userspace-api/media/v4l/dev-touch.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _touch:
diff --git a/Documentation/userspace-api/media/v4l/devices.rst b/Documentation/userspace-api/media/v4l/devices.rst
index 47ffe90..8bfbad65 100644
--- a/Documentation/userspace-api/media/v4l/devices.rst
+++ b/Documentation/userspace-api/media/v4l/devices.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _devices:
diff --git a/Documentation/userspace-api/media/v4l/diff-v4l.rst b/Documentation/userspace-api/media/v4l/diff-v4l.rst
index 37644d2..3f7bac4 100644
--- a/Documentation/userspace-api/media/v4l/diff-v4l.rst
+++ b/Documentation/userspace-api/media/v4l/diff-v4l.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _diff-v4l:
diff --git a/Documentation/userspace-api/media/v4l/dmabuf.rst b/Documentation/userspace-api/media/v4l/dmabuf.rst
index 342421f..f43d400 100644
--- a/Documentation/userspace-api/media/v4l/dmabuf.rst
+++ b/Documentation/userspace-api/media/v4l/dmabuf.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _dmabuf:
diff --git a/Documentation/userspace-api/media/v4l/dv-timings.rst b/Documentation/userspace-api/media/v4l/dv-timings.rst
index e216aa9..e17f056 100644
--- a/Documentation/userspace-api/media/v4l/dv-timings.rst
+++ b/Documentation/userspace-api/media/v4l/dv-timings.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _dv-timings:
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst
index d9a117f..c05a2d2 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _camera-controls:
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
index d0d506a..ce728c75 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _mpeg-controls:
@@ -581,6 +574,8 @@
- Variable bitrate
* - ``V4L2_MPEG_VIDEO_BITRATE_MODE_CBR``
- Constant bitrate
+ * - ``V4L2_MPEG_VIDEO_BITRATE_MODE_CQ``
+ - Constant quality
@@ -592,6 +587,48 @@
the average video bitrate. It is ignored if the video bitrate mode
is set to constant bitrate.
+``V4L2_CID_MPEG_VIDEO_CONSTANT_QUALITY (integer)``
+ Constant quality level control. This control is applicable when
+ ``V4L2_CID_MPEG_VIDEO_BITRATE_MODE`` value is
+ ``V4L2_MPEG_VIDEO_BITRATE_MODE_CQ``. Valid range is 1 to 100
+ where 1 indicates lowest quality and 100 indicates highest quality.
+ Encoder will decide the appropriate quantization parameter and
+ bitrate to produce requested frame quality.
+
+
+``V4L2_CID_MPEG_VIDEO_FRAME_SKIP_MODE (enum)``
+
+enum v4l2_mpeg_video_frame_skip_mode -
+ Indicates in what conditions the encoder should skip frames. If
+ encoding a frame would cause the encoded stream to be larger then a
+ chosen data limit then the frame will be skipped. Possible values
+ are:
+
+
+.. tabularcolumns:: |p{9.2cm}|p{8.3cm}|
+
+.. raw:: latex
+
+ \small
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+
+ * - ``V4L2_MPEG_FRAME_SKIP_MODE_DISABLED``
+ - Frame skip mode is disabled.
+ * - ``V4L2_MPEG_FRAME_SKIP_MODE_LEVEL_LIMIT``
+ - Frame skip mode enabled and buffer limit is set by the chosen
+ level and is defined by the standard.
+ * - ``V4L2_MPEG_FRAME_SKIP_MODE_BUF_LIMIT``
+ - Frame skip mode enabled and buffer limit is set by the
+ :ref:`VBV (MPEG1/2/4) <v4l2-mpeg-video-vbv-size>` or
+ :ref:`CPB (H264) buffer size <v4l2-mpeg-video-h264-cpb-size>` control.
+
+.. raw:: latex
+
+ \normalsize
+
``V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION (integer)``
For every captured frame, skip this many subsequent frames (default
0).
@@ -1163,6 +1200,8 @@
Quantization parameter for an B frame for MPEG4. Valid range: from 1
to 31.
+.. _v4l2-mpeg-video-vbv-size:
+
``V4L2_CID_MPEG_VIDEO_VBV_SIZE (integer)``
The Video Buffer Verifier size in kilobytes, it is used as a
limitation of frame skip. The VBV is defined in the standard as a
@@ -1200,6 +1239,8 @@
Force a key frame for the next queued buffer. Applicable to
encoders. This is a general, codec-agnostic keyframe control.
+.. _v4l2-mpeg-video-h264-cpb-size:
+
``V4L2_CID_MPEG_VIDEO_H264_CPB_SIZE (integer)``
The Coded Picture Buffer size in kilobytes, it is used as a
limitation of frame skip. The CPB is defined in the H264 standard as
@@ -1695,9 +1736,10 @@
* - ``V4L2_H264_PPS_FLAG_TRANSFORM_8X8_MODE``
- 0x00000040
-
- * - ``V4L2_H264_PPS_FLAG_PIC_SCALING_MATRIX_PRESENT``
+ * - ``V4L2_H264_PPS_FLAG_SCALING_MATRIX_PRESENT``
- 0x00000080
- -
+ - Indicates that ``V4L2_CID_MPEG_VIDEO_H264_SCALING_MATRIX``
+ must be used for this picture.
``V4L2_CID_MPEG_VIDEO_H264_SCALING_MATRIX (struct)``
Specifies the scaling matrix (as extracted from the bitstream) for
@@ -1725,12 +1767,14 @@
- ``scaling_list_4x4[6][16]``
- Scaling matrix after applying the inverse scanning process.
Expected list order is Intra Y, Intra Cb, Intra Cr, Inter Y,
- Inter Cb, Inter Cr.
+ Inter Cb, Inter Cr. The values on each scaling list are
+ expected in raster scan order.
* - __u8
- ``scaling_list_8x8[6][64]``
- Scaling matrix after applying the inverse scanning process.
Expected list order is Intra Y, Inter Y, Intra Cb, Inter Cb,
- Intra Cr, Inter Cr.
+ Intra Cr, Inter Cr. The values on each scaling list are
+ expected in raster scan order.
``V4L2_CID_MPEG_VIDEO_H264_SLICE_PARAMS (struct)``
Specifies the slice parameters (as extracted from the bitstream)
@@ -1746,9 +1790,6 @@
This compound control is not yet part of the public kernel API
and it is expected to change.
- This structure is expected to be passed as an array, with one
- entry for each slice included in the bitstream buffer.
-
.. c:type:: v4l2_ctrl_h264_slice_params
.. cssclass:: longtable
@@ -1759,61 +1800,20 @@
:widths: 1 1 2
* - __u32
- - ``size``
- -
- * - __u32
- - ``start_byte_offset``
- Offset (in bytes) from the beginning of the OUTPUT buffer to the start
- of the slice. If the slice starts with a start code, then this is the
- offset to such start code. When operating in slice-based decoding mode
- (see :c:type:`v4l2_mpeg_video_h264_decode_mode`), this field should
- be set to 0. When operating in frame-based decoding mode, this field
- should be 0 for the first slice.
- * - __u32
- ``header_bit_size``
- -
- * - __u16
+ - Offset in bits to slice_data() from the beginning of this slice.
+ * - __u32
- ``first_mb_in_slice``
-
* - __u8
- ``slice_type``
-
* - __u8
- - ``pic_parameter_set_id``
- -
- * - __u8
- ``colour_plane_id``
-
* - __u8
- ``redundant_pic_cnt``
-
- * - __u16
- - ``frame_num``
- -
- * - __u16
- - ``idr_pic_id``
- -
- * - __u16
- - ``pic_order_cnt_lsb``
- -
- * - __s32
- - ``delta_pic_order_cnt_bottom``
- -
- * - __s32
- - ``delta_pic_order_cnt0``
- -
- * - __s32
- - ``delta_pic_order_cnt1``
- -
- * - struct :c:type:`v4l2_h264_pred_weight_table`
- - ``pred_weight_table``
- -
- * - __u32
- - ``dec_ref_pic_marking_bit_size``
- - Size in bits of the dec_ref_pic_marking() syntax element.
- * - __u32
- - ``pic_order_cnt_bit_size``
- -
* - __u8
- ``cabac_init_idc``
-
@@ -1840,13 +1840,13 @@
- ``num_ref_idx_l1_active_minus1``
- If num_ref_idx_active_override_flag is not set, this field must be
set to the value of num_ref_idx_l1_default_active_minus1.
- * - __u32
- - ``slice_group_change_cycle``
- -
* - __u8
+ - ``reserved``
+ - Applications and drivers must set this to zero.
+ * - struct :c:type:`v4l2_h264_reference`
- ``ref_pic_list0[32]``
- Reference picture list after applying the per-slice modifications
- * - __u8
+ * - struct :c:type:`v4l2_h264_reference`
- ``ref_pic_list1[32]``
- Reference picture list after applying the per-slice modifications
* - __u32
@@ -1864,31 +1864,30 @@
:stub-columns: 0
:widths: 1 1 2
- * - ``V4L2_H264_SLICE_FLAG_FIELD_PIC``
+ * - ``V4L2_H264_SLICE_FLAG_DIRECT_SPATIAL_MV_PRED``
- 0x00000001
-
- * - ``V4L2_H264_SLICE_FLAG_BOTTOM_FIELD``
+ * - ``V4L2_H264_SLICE_FLAG_SP_FOR_SWITCH``
- 0x00000002
-
- * - ``V4L2_H264_SLICE_FLAG_DIRECT_SPATIAL_MV_PRED``
- - 0x00000004
- -
- * - ``V4L2_H264_SLICE_FLAG_SP_FOR_SWITCH``
- - 0x00000008
- -
-``Prediction Weight Table``
+``V4L2_CID_MPEG_VIDEO_H264_PRED_WEIGHTS (struct)``
+ Prediction weight table defined according to :ref:`h264`,
+ section 7.4.3.2 "Prediction Weight Table Semantics".
+ The prediction weight table must be passed by applications
+ under the conditions explained in section 7.3.3 "Slice header
+ syntax".
- The bitstream parameters are defined according to :ref:`h264`,
- section 7.4.3.2 "Prediction Weight Table Semantics". For further
- documentation, refer to the above specification, unless there is
- an explicit comment stating otherwise.
+ .. note::
-.. c:type:: v4l2_h264_pred_weight_table
+ This compound control is not yet part of the public kernel API and
+ it is expected to change.
+
+.. c:type:: v4l2_ctrl_h264_pred_weights
.. cssclass:: longtable
-.. flat-table:: struct v4l2_h264_pred_weight_table
+.. flat-table:: struct v4l2_ctrl_h264_pred_weights
:header-rows: 0
:stub-columns: 0
:widths: 1 1 2
@@ -1926,6 +1925,46 @@
- ``chroma_offset[32][2]``
-
+``Picture Reference``
+
+.. c:type:: v4l2_h264_reference
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_h264_reference
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - __u8
+ - ``fields``
+ - Specifies how the picture is referenced. See :ref:`Reference Fields <h264_ref_fields>`
+ * - __u8
+ - ``index``
+ - Index into the :c:type:`v4l2_ctrl_h264_decode_params`.dpb array.
+
+.. _h264_ref_fields:
+
+``Reference Fields``
+
+.. cssclass:: longtable
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - ``V4L2_H264_TOP_FIELD_REF``
+ - 0x1
+ - The top field in field pair is used for short-term reference.
+ * - ``V4L2_H264_BOTTOM_FIELD_REF``
+ - 0x2
+ - The bottom field in field pair is used for short-term reference.
+ * - ``V4L2_H264_FRAME_REF``
+ - 0x3
+ - The frame (or the top/bottom fields, if it's a field pair)
+ is used for short-term reference.
+
``V4L2_CID_MPEG_VIDEO_H264_DECODE_PARAMS (struct)``
Specifies the decode parameters (as extracted from the bitstream)
for the associated H264 slice data. This includes the necessary
@@ -1953,20 +1992,46 @@
- ``dpb[16]``
-
* - __u16
- - ``num_slices``
- - Number of slices needed to decode the current frame/field. When
- operating in slice-based decoding mode (see
- :c:type:`v4l2_mpeg_video_h264_decode_mode`), this field
- should always be set to one.
- * - __u16
- ``nal_ref_idc``
- NAL reference ID value coming from the NAL Unit header
+ * - __u16
+ - ``frame_num``
+ -
* - __s32
- ``top_field_order_cnt``
- Picture Order Count for the coded top field
* - __s32
- ``bottom_field_order_cnt``
- Picture Order Count for the coded bottom field
+ * - __u16
+ - ``idr_pic_id``
+ -
+ * - __u16
+ - ``pic_order_cnt_lsb``
+ -
+ * - __s32
+ - ``delta_pic_order_cnt_bottom``
+ -
+ * - __s32
+ - ``delta_pic_order_cnt0``
+ -
+ * - __s32
+ - ``delta_pic_order_cnt1``
+ -
+ * - __u32
+ - ``dec_ref_pic_marking_bit_size``
+ - Size in bits of the dec_ref_pic_marking() syntax element.
+ * - __u32
+ - ``pic_order_cnt_bit_size``
+ - Combined size in bits of the picture order count related syntax
+ elements: pic_order_cnt_lsb, delta_pic_order_cnt_bottom,
+ delta_pic_order_cnt0, and delta_pic_order_cnt1.
+ * - __u32
+ - ``slice_group_change_cycle``
+ -
+ * - __u32
+ - ``reserved``
+ - Applications and drivers must set this to zero.
* - __u32
- ``flags``
- See :ref:`Decode Parameters Flags <h264_decode_params_flags>`
@@ -1985,6 +2050,12 @@
* - ``V4L2_H264_DECODE_PARAM_FLAG_IDR_PIC``
- 0x00000001
- That picture is an IDR picture
+ * - ``V4L2_H264_DECODE_PARAM_FLAG_FIELD_PIC``
+ - 0x00000002
+ -
+ * - ``V4L2_H264_DECODE_PARAM_FLAG_BOTTOM_FIELD``
+ - 0x00000004
+ -
.. c:type:: v4l2_h264_dpb_entry
@@ -2002,12 +2073,18 @@
``timestamp`` field in struct :c:type:`v4l2_buffer`. Use the
:c:func:`v4l2_timeval_to_ns()` function to convert the struct
:c:type:`timeval` in struct :c:type:`v4l2_buffer` to a __u64.
+ * - __u32
+ - ``pic_num``
+ -
* - __u16
- ``frame_num``
-
- * - __u16
- - ``pic_num``
- -
+ * - __u8
+ - ``fields``
+ - Specifies how the DPB entry is referenced. See :ref:`Reference Fields <h264_ref_fields>`
+ * - __u8
+ - ``reserved[5]``
+ - Applications and drivers must set this to zero.
* - __s32
- ``top_field_order_cnt``
-
@@ -2031,29 +2108,16 @@
* - ``V4L2_H264_DPB_ENTRY_FLAG_VALID``
- 0x00000001
- - The DPB entry is valid and should be considered
+ - The DPB entry is valid (non-empty) and should be considered.
* - ``V4L2_H264_DPB_ENTRY_FLAG_ACTIVE``
- 0x00000002
- - The DPB entry is currently being used as a reference frame
+ - The DPB entry is used for reference.
* - ``V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM``
- 0x00000004
- - The DPB entry is a long term reference frame
+ - The DPB entry is used for long-term reference.
* - ``V4L2_H264_DPB_ENTRY_FLAG_FIELD``
- 0x00000008
- - The DPB entry is a field reference, which means only one of the field
- will be used when decoding the new frame/field. When not set the DPB
- entry is a frame reference (both fields will be used). Note that this
- flag does not say anything about the number of fields contained in the
- reference frame, it just describes the one used to decode the new
- field/frame
- * - ``V4L2_H264_DPB_ENTRY_FLAG_BOTTOM_FIELD``
- - 0x00000010
- - The DPB entry is a bottom field reference (only the bottom field of the
- reference frame is needed to decode the new frame/field). Only valid if
- V4L2_H264_DPB_ENTRY_FLAG_FIELD is set. When
- V4L2_H264_DPB_ENTRY_FLAG_FIELD is set but
- V4L2_H264_DPB_ENTRY_FLAG_BOTTOM_FIELD is not, that means the
- DPB entry is a top field reference
+ - The DPB entry is a single field or a complementary field pair.
``V4L2_CID_MPEG_VIDEO_H264_DECODE_MODE (enum)``
Specifies the decoding mode to use. Currently exposes slice-based and
@@ -2082,22 +2146,20 @@
* - ``V4L2_MPEG_VIDEO_H264_DECODE_MODE_SLICE_BASED``
- 0
- Decoding is done at the slice granularity.
- In this mode, ``num_slices`` field in struct
- :c:type:`v4l2_ctrl_h264_decode_params` should be set to 1,
- and ``start_byte_offset`` in struct
- :c:type:`v4l2_ctrl_h264_slice_params` should be set to 0.
The OUTPUT buffer must contain a single slice.
+ When this mode is selected, the ``V4L2_CID_MPEG_VIDEO_H264_SLICE_PARAMS``
+ control shall be set. When multiple slices compose a frame,
+ use of ``V4L2_BUF_CAP_SUPPORTS_M2M_HOLD_CAPTURE_BUF`` flag
+ is required.
* - ``V4L2_MPEG_VIDEO_H264_DECODE_MODE_FRAME_BASED``
- 1
- - Decoding is done at the frame granularity.
- In this mode, ``num_slices`` field in struct
- :c:type:`v4l2_ctrl_h264_decode_params` should be set to the number
- of slices in the frame, and ``start_byte_offset`` in struct
- :c:type:`v4l2_ctrl_h264_slice_params` should be set accordingly
- for each slice. For the first slice, ``start_byte_offset`` should
- be zero.
+ - Decoding is done at the frame granularity,
The OUTPUT buffer must contain all slices needed to decode the
frame. The OUTPUT buffer must also contain both fields.
+ This mode will be supported by devices that
+ parse the slice(s) header(s) in hardware. When this mode is
+ selected, the ``V4L2_CID_MPEG_VIDEO_H264_SLICE_PARAMS``
+ control shall not be set.
``V4L2_CID_MPEG_VIDEO_H264_START_CODE (enum)``
Specifies the H264 slice start code expected for each slice.
@@ -2773,6 +2835,11 @@
``V4L2_CID_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE``
(enum)
+ .. note::
+
+ This control is deprecated. Use the standard
+ ``V4L2_CID_MPEG_VIDEO_FRAME_SKIP_MODE`` control instead.
+
enum v4l2_mpeg_mfc51_video_frame_skip_mode -
Indicates in what conditions the encoder should skip frames. If
encoding a frame would cause the encoded stream to be larger then a
@@ -3316,6 +3383,49 @@
* - ``V4L2_MPEG_VIDEO_VP9_PROFILE_3``
- Profile 3
+.. _v4l2-mpeg-video-vp9-level:
+
+``V4L2_CID_MPEG_VIDEO_VP9_LEVEL (enum)``
+
+enum v4l2_mpeg_video_vp9_level -
+ This control allows selecting the level for VP9 encoder.
+ This is also used to enumerate supported levels by VP9 encoder or decoder.
+ More information can be found at
+ `webmproject <https://www.webmproject.org/vp9/levels/>`__. Possible values are:
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+
+ * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_1_0``
+ - Level 1
+ * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_1_1``
+ - Level 1.1
+ * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_2_0``
+ - Level 2
+ * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_2_1``
+ - Level 2.1
+ * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_3_0``
+ - Level 3
+ * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_3_1``
+ - Level 3.1
+ * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_4_0``
+ - Level 4
+ * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_4_1``
+ - Level 4.1
+ * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_5_0``
+ - Level 5
+ * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_5_1``
+ - Level 5.1
+ * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_5_2``
+ - Level 5.2
+ * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_6_0``
+ - Level 6
+ * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_6_1``
+ - Level 6.1
+ * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_6_2``
+ - Level 6.2
+
High Efficiency Video Coding (HEVC/H.265) Control Reference
===========================================================
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-detect.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-detect.rst
index 77a4992..312c4fa 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-detect.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-detect.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _detect-controls:
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-dv.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-dv.rst
index c572b65..a6f696b 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-dv.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-dv.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _dv-controls:
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-flash.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-flash.rst
index 5053a38..ad4b878 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-flash.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-flash.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _flash-controls:
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-fm-rx.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-fm-rx.rst
index 69197bb..b6cfc0e 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-fm-rx.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-fm-rx.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _fm-rx-controls:
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-fm-tx.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-fm-tx.rst
index c13ec0a..04c997c 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-fm-tx.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-fm-tx.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is included at
-.. Documentation/userspace-api/media/fdl-appendix.rst.
-..
-.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
.. _fm-tx-controls:
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-image-process.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-image-process.rst
index bb9d484..87698c1 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-image-process.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-image-process.rst
@@ -1,11 +1,4 @@
-.. Permission is granted to copy, distribute and/or modify this
-.. document under the terms of the GNU Free Documentation License,
-.. Version 1.1 or any later version published by the Free Software
-.. Foundation, with no Invariant Sections, no Front-Cover Texts
-.. and no Back-Cover Texts. A copy of the license is
