| /* |
| * Copyright © 2008 Keith Packard |
| * |
| * Permission to use, copy, modify, distribute, and sell this software and its |
| * documentation for any purpose is hereby granted without fee, provided that |
| * the above copyright notice appear in all copies and that both that copyright |
| * notice and this permission notice appear in supporting documentation, and |
| * that the name of the copyright holders not be used in advertising or |
| * publicity pertaining to distribution of the software without specific, |
| * written prior permission. The copyright holders make no representations |
| * about the suitability of this software for any purpose. It is provided "as |
| * is" without express or implied warranty. |
| * |
| * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, |
| * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO |
| * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR |
| * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, |
| * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER |
| * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE |
| * OF THIS SOFTWARE. |
| */ |
| |
| #ifndef _DRM_DP_HELPER_H_ |
| #define _DRM_DP_HELPER_H_ |
| |
| #include <linux/delay.h> |
| #include <linux/i2c.h> |
| #include <linux/types.h> |
| |
| /* |
| * Unless otherwise noted, all values are from the DP 1.1a spec. Note that |
| * DP and DPCD versions are independent. Differences from 1.0 are not noted, |
| * 1.0 devices basically don't exist in the wild. |
| * |
| * Abbreviations, in chronological order: |
| * |
| * eDP: Embedded DisplayPort version 1 |
| * DPI: DisplayPort Interoperability Guideline v1.1a |
| * 1.2: DisplayPort 1.2 |
| * MST: Multistream Transport - part of DP 1.2a |
| * |
| * 1.2 formally includes both eDP and DPI definitions. |
| */ |
| |
| /* MSA (Main Stream Attribute) MISC bits (as MISC1<<8|MISC0) */ |
| #define DP_MSA_MISC_SYNC_CLOCK (1 << 0) |
| #define DP_MSA_MISC_INTERLACE_VTOTAL_EVEN (1 << 8) |
| #define DP_MSA_MISC_STEREO_NO_3D (0 << 9) |
| #define DP_MSA_MISC_STEREO_PROG_RIGHT_EYE (1 << 9) |
| #define DP_MSA_MISC_STEREO_PROG_LEFT_EYE (3 << 9) |
| /* bits per component for non-RAW */ |
| #define DP_MSA_MISC_6_BPC (0 << 5) |
| #define DP_MSA_MISC_8_BPC (1 << 5) |
| #define DP_MSA_MISC_10_BPC (2 << 5) |
| #define DP_MSA_MISC_12_BPC (3 << 5) |
| #define DP_MSA_MISC_16_BPC (4 << 5) |
| /* bits per component for RAW */ |
| #define DP_MSA_MISC_RAW_6_BPC (1 << 5) |
| #define DP_MSA_MISC_RAW_7_BPC (2 << 5) |
| #define DP_MSA_MISC_RAW_8_BPC (3 << 5) |
| #define DP_MSA_MISC_RAW_10_BPC (4 << 5) |
| #define DP_MSA_MISC_RAW_12_BPC (5 << 5) |
| #define DP_MSA_MISC_RAW_14_BPC (6 << 5) |
| #define DP_MSA_MISC_RAW_16_BPC (7 << 5) |
| /* pixel encoding/colorimetry format */ |
| #define _DP_MSA_MISC_COLOR(misc1_7, misc0_21, misc0_3, misc0_4) \ |
| ((misc1_7) << 15 | (misc0_4) << 4 | (misc0_3) << 3 | ((misc0_21) << 1)) |
| #define DP_MSA_MISC_COLOR_RGB _DP_MSA_MISC_COLOR(0, 0, 0, 0) |
| #define DP_MSA_MISC_COLOR_CEA_RGB _DP_MSA_MISC_COLOR(0, 0, 1, 0) |
| #define DP_MSA_MISC_COLOR_RGB_WIDE_FIXED _DP_MSA_MISC_COLOR(0, 3, 0, 0) |
| #define DP_MSA_MISC_COLOR_RGB_WIDE_FLOAT _DP_MSA_MISC_COLOR(0, 3, 0, 1) |
| #define DP_MSA_MISC_COLOR_Y_ONLY _DP_MSA_MISC_COLOR(1, 0, 0, 0) |
| #define DP_MSA_MISC_COLOR_RAW _DP_MSA_MISC_COLOR(1, 1, 0, 0) |
| #define DP_MSA_MISC_COLOR_YCBCR_422_BT601 _DP_MSA_MISC_COLOR(0, 1, 1, 0) |
| #define DP_MSA_MISC_COLOR_YCBCR_422_BT709 _DP_MSA_MISC_COLOR(0, 1, 1, 1) |
| #define DP_MSA_MISC_COLOR_YCBCR_444_BT601 _DP_MSA_MISC_COLOR(0, 2, 1, 0) |
| #define DP_MSA_MISC_COLOR_YCBCR_444_BT709 _DP_MSA_MISC_COLOR(0, 2, 1, 1) |
| #define DP_MSA_MISC_COLOR_XVYCC_422_BT601 _DP_MSA_MISC_COLOR(0, 1, 0, 0) |
| #define DP_MSA_MISC_COLOR_XVYCC_422_BT709 _DP_MSA_MISC_COLOR(0, 1, 0, 1) |
| #define DP_MSA_MISC_COLOR_XVYCC_444_BT601 _DP_MSA_MISC_COLOR(0, 2, 0, 0) |
| #define DP_MSA_MISC_COLOR_XVYCC_444_BT709 _DP_MSA_MISC_COLOR(0, 2, 0, 1) |
| #define DP_MSA_MISC_COLOR_OPRGB _DP_MSA_MISC_COLOR(0, 0, 1, 1) |
| #define DP_MSA_MISC_COLOR_DCI_P3 _DP_MSA_MISC_COLOR(0, 3, 1, 0) |
| #define DP_MSA_MISC_COLOR_COLOR_PROFILE _DP_MSA_MISC_COLOR(0, 3, 1, 1) |
| #define DP_MSA_MISC_COLOR_VSC_SDP (1 << 14) |
| |
| #define DP_AUX_MAX_PAYLOAD_BYTES 16 |
| |
| #define DP_AUX_I2C_WRITE 0x0 |
| #define DP_AUX_I2C_READ 0x1 |
| #define DP_AUX_I2C_WRITE_STATUS_UPDATE 0x2 |
| #define DP_AUX_I2C_MOT 0x4 |
| #define DP_AUX_NATIVE_WRITE 0x8 |
| #define DP_AUX_NATIVE_READ 0x9 |
| |
| #define DP_AUX_NATIVE_REPLY_ACK (0x0 << 0) |
| #define DP_AUX_NATIVE_REPLY_NACK (0x1 << 0) |
| #define DP_AUX_NATIVE_REPLY_DEFER (0x2 << 0) |
| #define DP_AUX_NATIVE_REPLY_MASK (0x3 << 0) |
| |
| #define DP_AUX_I2C_REPLY_ACK (0x0 << 2) |
| #define DP_AUX_I2C_REPLY_NACK (0x1 << 2) |
| #define DP_AUX_I2C_REPLY_DEFER (0x2 << 2) |
| #define DP_AUX_I2C_REPLY_MASK (0x3 << 2) |
| |
| /* AUX CH addresses */ |
| /* DPCD */ |
| #define DP_DPCD_REV 0x000 |
| # define DP_DPCD_REV_10 0x10 |
| # define DP_DPCD_REV_11 0x11 |
| # define DP_DPCD_REV_12 0x12 |
| # define DP_DPCD_REV_13 0x13 |
| # define DP_DPCD_REV_14 0x14 |
| |
| #define DP_MAX_LINK_RATE 0x001 |
| |
| #define DP_MAX_LANE_COUNT 0x002 |
| # define DP_MAX_LANE_COUNT_MASK 0x1f |
| # define DP_TPS3_SUPPORTED (1 << 6) /* 1.2 */ |
| # define DP_ENHANCED_FRAME_CAP (1 << 7) |
| |
| #define DP_MAX_DOWNSPREAD 0x003 |
| # define DP_MAX_DOWNSPREAD_0_5 (1 << 0) |
| # define DP_NO_AUX_HANDSHAKE_LINK_TRAINING (1 << 6) |
| # define DP_TPS4_SUPPORTED (1 << 7) |
| |
| #define DP_NORP 0x004 |
| |
| #define DP_DOWNSTREAMPORT_PRESENT 0x005 |
| # define DP_DWN_STRM_PORT_PRESENT (1 << 0) |
| # define DP_DWN_STRM_PORT_TYPE_MASK 0x06 |
| # define DP_DWN_STRM_PORT_TYPE_DP (0 << 1) |
| # define DP_DWN_STRM_PORT_TYPE_ANALOG (1 << 1) |
| # define DP_DWN_STRM_PORT_TYPE_TMDS (2 << 1) |
| # define DP_DWN_STRM_PORT_TYPE_OTHER (3 << 1) |
| # define DP_FORMAT_CONVERSION (1 << 3) |
| # define DP_DETAILED_CAP_INFO_AVAILABLE (1 << 4) /* DPI */ |
| |
| #define DP_MAIN_LINK_CHANNEL_CODING 0x006 |
| # define DP_CAP_ANSI_8B10B (1 << 0) |
| |
| #define DP_DOWN_STREAM_PORT_COUNT 0x007 |
| # define DP_PORT_COUNT_MASK 0x0f |
| # define DP_MSA_TIMING_PAR_IGNORED (1 << 6) /* eDP */ |
| # define DP_OUI_SUPPORT (1 << 7) |
| |
| #define DP_RECEIVE_PORT_0_CAP_0 0x008 |
| # define DP_LOCAL_EDID_PRESENT (1 << 1) |
| # define DP_ASSOCIATED_TO_PRECEDING_PORT (1 << 2) |
| |
| #define DP_RECEIVE_PORT_0_BUFFER_SIZE 0x009 |
| |
| #define DP_RECEIVE_PORT_1_CAP_0 0x00a |
| #define DP_RECEIVE_PORT_1_BUFFER_SIZE 0x00b |
| |
| #define DP_I2C_SPEED_CAP 0x00c /* DPI */ |
| # define DP_I2C_SPEED_1K 0x01 |
| # define DP_I2C_SPEED_5K 0x02 |
| # define DP_I2C_SPEED_10K 0x04 |
| # define DP_I2C_SPEED_100K 0x08 |
| # define DP_I2C_SPEED_400K 0x10 |
| # define DP_I2C_SPEED_1M 0x20 |
| |
| #define DP_EDP_CONFIGURATION_CAP 0x00d /* XXX 1.2? */ |
| # define DP_ALTERNATE_SCRAMBLER_RESET_CAP (1 << 0) |
| # define DP_FRAMING_CHANGE_CAP (1 << 1) |
| # define DP_DPCD_DISPLAY_CONTROL_CAPABLE (1 << 3) /* edp v1.2 or higher */ |
| |
| #define DP_TRAINING_AUX_RD_INTERVAL 0x00e /* XXX 1.2? */ |
| # define DP_TRAINING_AUX_RD_MASK 0x7F /* DP 1.3 */ |
| # define DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT (1 << 7) /* DP 1.3 */ |
| |
| #define DP_ADAPTER_CAP 0x00f /* 1.2 */ |
| # define DP_FORCE_LOAD_SENSE_CAP (1 << 0) |
| # define DP_ALTERNATE_I2C_PATTERN_CAP (1 << 1) |
| |
| #define DP_SUPPORTED_LINK_RATES 0x010 /* eDP 1.4 */ |
| # define DP_MAX_SUPPORTED_RATES 8 /* 16-bit little-endian */ |
| |
| /* Multiple stream transport */ |
| #define DP_FAUX_CAP 0x020 /* 1.2 */ |
| # define DP_FAUX_CAP_1 (1 << 0) |
| |
| #define DP_MSTM_CAP 0x021 /* 1.2 */ |
| # define DP_MST_CAP (1 << 0) |
| |
| #define DP_NUMBER_OF_AUDIO_ENDPOINTS 0x022 /* 1.2 */ |
| |
| /* AV_SYNC_DATA_BLOCK 1.2 */ |
| #define DP_AV_GRANULARITY 0x023 |
| # define DP_AG_FACTOR_MASK (0xf << 0) |
| # define DP_AG_FACTOR_3MS (0 << 0) |
| # define DP_AG_FACTOR_2MS (1 << 0) |
| # define DP_AG_FACTOR_1MS (2 << 0) |
| # define DP_AG_FACTOR_500US (3 << 0) |
| # define DP_AG_FACTOR_200US (4 << 0) |
| # define DP_AG_FACTOR_100US (5 << 0) |
| # define DP_AG_FACTOR_10US (6 << 0) |
| # define DP_AG_FACTOR_1US (7 << 0) |
| # define DP_VG_FACTOR_MASK (0xf << 4) |
| # define DP_VG_FACTOR_3MS (0 << 4) |
| # define DP_VG_FACTOR_2MS (1 << 4) |
| # define DP_VG_FACTOR_1MS (2 << 4) |
| # define DP_VG_FACTOR_500US (3 << 4) |
| # define DP_VG_FACTOR_200US (4 << 4) |
| # define DP_VG_FACTOR_100US (5 << 4) |
| |
| #define DP_AUD_DEC_LAT0 0x024 |
| #define DP_AUD_DEC_LAT1 0x025 |
| |
| #define DP_AUD_PP_LAT0 0x026 |
| #define DP_AUD_PP_LAT1 0x027 |
| |
| #define DP_VID_INTER_LAT 0x028 |
| |
| #define DP_VID_PROG_LAT 0x029 |
| |
| #define DP_REP_LAT 0x02a |
| |
| #define DP_AUD_DEL_INS0 0x02b |
| #define DP_AUD_DEL_INS1 0x02c |
| #define DP_AUD_DEL_INS2 0x02d |
| /* End of AV_SYNC_DATA_BLOCK */ |
| |
| #define DP_RECEIVER_ALPM_CAP 0x02e /* eDP 1.4 */ |
| # define DP_ALPM_CAP (1 << 0) |
| |
| #define DP_SINK_DEVICE_AUX_FRAME_SYNC_CAP 0x02f /* eDP 1.4 */ |
| # define DP_AUX_FRAME_SYNC_CAP (1 << 0) |
| |
| #define DP_GUID 0x030 /* 1.2 */ |
| |
| #define DP_DSC_SUPPORT 0x060 /* DP 1.4 */ |
| # define DP_DSC_DECOMPRESSION_IS_SUPPORTED (1 << 0) |
| |
| #define DP_DSC_REV 0x061 |
| # define DP_DSC_MAJOR_MASK (0xf << 0) |
| # define DP_DSC_MINOR_MASK (0xf << 4) |
| # define DP_DSC_MAJOR_SHIFT 0 |
| # define DP_DSC_MINOR_SHIFT 4 |
| |
| #define DP_DSC_RC_BUF_BLK_SIZE 0x062 |
| # define DP_DSC_RC_BUF_BLK_SIZE_1 0x0 |
| # define DP_DSC_RC_BUF_BLK_SIZE_4 0x1 |
| # define DP_DSC_RC_BUF_BLK_SIZE_16 0x2 |
| # define DP_DSC_RC_BUF_BLK_SIZE_64 0x3 |
| |
| #define DP_DSC_RC_BUF_SIZE 0x063 |
| |
| #define DP_DSC_SLICE_CAP_1 0x064 |
| # define DP_DSC_1_PER_DP_DSC_SINK (1 << 0) |
| # define DP_DSC_2_PER_DP_DSC_SINK (1 << 1) |
| # define DP_DSC_4_PER_DP_DSC_SINK (1 << 3) |
| # define DP_DSC_6_PER_DP_DSC_SINK (1 << 4) |
| # define DP_DSC_8_PER_DP_DSC_SINK (1 << 5) |
| # define DP_DSC_10_PER_DP_DSC_SINK (1 << 6) |
| # define DP_DSC_12_PER_DP_DSC_SINK (1 << 7) |
| |
| #define DP_DSC_LINE_BUF_BIT_DEPTH 0x065 |
| # define DP_DSC_LINE_BUF_BIT_DEPTH_MASK (0xf << 0) |
| # define DP_DSC_LINE_BUF_BIT_DEPTH_9 0x0 |
| # define DP_DSC_LINE_BUF_BIT_DEPTH_10 0x1 |
| # define DP_DSC_LINE_BUF_BIT_DEPTH_11 0x2 |
| # define DP_DSC_LINE_BUF_BIT_DEPTH_12 0x3 |
| # define DP_DSC_LINE_BUF_BIT_DEPTH_13 0x4 |
| # define DP_DSC_LINE_BUF_BIT_DEPTH_14 0x5 |
| # define DP_DSC_LINE_BUF_BIT_DEPTH_15 0x6 |
| # define DP_DSC_LINE_BUF_BIT_DEPTH_16 0x7 |
| # define DP_DSC_LINE_BUF_BIT_DEPTH_8 0x8 |
| |
| #define DP_DSC_BLK_PREDICTION_SUPPORT 0x066 |
| # define DP_DSC_BLK_PREDICTION_IS_SUPPORTED (1 << 0) |
| |
| #define DP_DSC_MAX_BITS_PER_PIXEL_LOW 0x067 /* eDP 1.4 */ |
| |
| #define DP_DSC_MAX_BITS_PER_PIXEL_HI 0x068 /* eDP 1.4 */ |
| # define DP_DSC_MAX_BITS_PER_PIXEL_HI_MASK (0x3 << 0) |
| # define DP_DSC_MAX_BITS_PER_PIXEL_HI_SHIFT 8 |
| |
| #define DP_DSC_DEC_COLOR_FORMAT_CAP 0x069 |
| # define DP_DSC_RGB (1 << 0) |
| # define DP_DSC_YCbCr444 (1 << 1) |
| # define DP_DSC_YCbCr422_Simple (1 << 2) |
| # define DP_DSC_YCbCr422_Native (1 << 3) |
| # define DP_DSC_YCbCr420_Native (1 << 4) |
| |
| #define DP_DSC_DEC_COLOR_DEPTH_CAP 0x06A |
| # define DP_DSC_8_BPC (1 << 1) |
| # define DP_DSC_10_BPC (1 << 2) |
| # define DP_DSC_12_BPC (1 << 3) |
| |
| #define DP_DSC_PEAK_THROUGHPUT 0x06B |
| # define DP_DSC_THROUGHPUT_MODE_0_MASK (0xf << 0) |
| # define DP_DSC_THROUGHPUT_MODE_0_SHIFT 0 |
| # define DP_DSC_THROUGHPUT_MODE_0_UNSUPPORTED 0 |
| # define DP_DSC_THROUGHPUT_MODE_0_340 (1 << 0) |
| # define DP_DSC_THROUGHPUT_MODE_0_400 (2 << 0) |
| # define DP_DSC_THROUGHPUT_MODE_0_450 (3 << 0) |
| # define DP_DSC_THROUGHPUT_MODE_0_500 (4 << 0) |
| # define DP_DSC_THROUGHPUT_MODE_0_550 (5 << 0) |
| # define DP_DSC_THROUGHPUT_MODE_0_600 (6 << 0) |
| # define DP_DSC_THROUGHPUT_MODE_0_650 (7 << 0) |
| # define DP_DSC_THROUGHPUT_MODE_0_700 (8 << 0) |
| # define DP_DSC_THROUGHPUT_MODE_0_750 (9 << 0) |
| # define DP_DSC_THROUGHPUT_MODE_0_800 (10 << 0) |
| # define DP_DSC_THROUGHPUT_MODE_0_850 (11 << 0) |
| # define DP_DSC_THROUGHPUT_MODE_0_900 (12 << 0) |
| # define DP_DSC_THROUGHPUT_MODE_0_950 (13 << 0) |
| # define DP_DSC_THROUGHPUT_MODE_0_1000 (14 << 0) |
| # define DP_DSC_THROUGHPUT_MODE_0_170 (15 << 0) /* 1.4a */ |
| # define DP_DSC_THROUGHPUT_MODE_1_MASK (0xf << 4) |
| # define DP_DSC_THROUGHPUT_MODE_1_SHIFT 4 |
| # define DP_DSC_THROUGHPUT_MODE_1_UNSUPPORTED 0 |
| # define DP_DSC_THROUGHPUT_MODE_1_340 (1 << 4) |
| # define DP_DSC_THROUGHPUT_MODE_1_400 (2 << 4) |
| # define DP_DSC_THROUGHPUT_MODE_1_450 (3 << 4) |
| # define DP_DSC_THROUGHPUT_MODE_1_500 (4 << 4) |
| # define DP_DSC_THROUGHPUT_MODE_1_550 (5 << 4) |
| # define DP_DSC_THROUGHPUT_MODE_1_600 (6 << 4) |
| # define DP_DSC_THROUGHPUT_MODE_1_650 (7 << 4) |
| # define DP_DSC_THROUGHPUT_MODE_1_700 (8 << 4) |
| # define DP_DSC_THROUGHPUT_MODE_1_750 (9 << 4) |
| # define DP_DSC_THROUGHPUT_MODE_1_800 (10 << 4) |
| # define DP_DSC_THROUGHPUT_MODE_1_850 (11 << 4) |
| # define DP_DSC_THROUGHPUT_MODE_1_900 (12 << 4) |
| # define DP_DSC_THROUGHPUT_MODE_1_950 (13 << 4) |
| # define DP_DSC_THROUGHPUT_MODE_1_1000 (14 << 4) |
| # define DP_DSC_THROUGHPUT_MODE_1_170 (15 << 4) |
| |
| #define DP_DSC_MAX_SLICE_WIDTH 0x06C |
| #define DP_DSC_MIN_SLICE_WIDTH_VALUE 2560 |
| #define DP_DSC_SLICE_WIDTH_MULTIPLIER 320 |
| |
| #define DP_DSC_SLICE_CAP_2 0x06D |
| # define DP_DSC_16_PER_DP_DSC_SINK (1 << 0) |
| # define DP_DSC_20_PER_DP_DSC_SINK (1 << 1) |
| # define DP_DSC_24_PER_DP_DSC_SINK (1 << 2) |
| |
| #define DP_DSC_BITS_PER_PIXEL_INC 0x06F |
| # define DP_DSC_BITS_PER_PIXEL_1_16 0x0 |
| # define DP_DSC_BITS_PER_PIXEL_1_8 0x1 |
| # define DP_DSC_BITS_PER_PIXEL_1_4 0x2 |
| # define DP_DSC_BITS_PER_PIXEL_1_2 0x3 |
| # define DP_DSC_BITS_PER_PIXEL_1 0x4 |
| |
| #define DP_PSR_SUPPORT 0x070 /* XXX 1.2? */ |
| # define DP_PSR_IS_SUPPORTED 1 |
| # define DP_PSR2_IS_SUPPORTED 2 /* eDP 1.4 */ |
| # define DP_PSR2_WITH_Y_COORD_IS_SUPPORTED 3 /* eDP 1.4a */ |
| |
| #define DP_PSR_CAPS 0x071 /* XXX 1.2? */ |
| # define DP_PSR_NO_TRAIN_ON_EXIT 1 |
| # define DP_PSR_SETUP_TIME_330 (0 << 1) |
| # define DP_PSR_SETUP_TIME_275 (1 << 1) |
| # define DP_PSR_SETUP_TIME_220 (2 << 1) |
| # define DP_PSR_SETUP_TIME_165 (3 << 1) |
| # define DP_PSR_SETUP_TIME_110 (4 << 1) |
| # define DP_PSR_SETUP_TIME_55 (5 << 1) |
| # define DP_PSR_SETUP_TIME_0 (6 << 1) |
| # define DP_PSR_SETUP_TIME_MASK (7 << 1) |
| # define DP_PSR_SETUP_TIME_SHIFT 1 |
| # define DP_PSR2_SU_Y_COORDINATE_REQUIRED (1 << 4) /* eDP 1.4a */ |
| # define DP_PSR2_SU_GRANULARITY_REQUIRED (1 << 5) /* eDP 1.4b */ |
| |
| #define DP_PSR2_SU_X_GRANULARITY 0x072 /* eDP 1.4b */ |
| #define DP_PSR2_SU_Y_GRANULARITY 0x074 /* eDP 1.4b */ |
| |
| /* |
| * 0x80-0x8f describe downstream port capabilities, but there are two layouts |
| * based on whether DP_DETAILED_CAP_INFO_AVAILABLE was set. If it was not, |
| * each port's descriptor is one byte wide. If it was set, each port's is |
| * four bytes wide, starting with the one byte from the base info. As of |
| * DP interop v1.1a only VGA defines additional detail. |
| */ |
| |
| /* offset 0 */ |
| #define DP_DOWNSTREAM_PORT_0 0x80 |
| # define DP_DS_PORT_TYPE_MASK (7 << 0) |
| # define DP_DS_PORT_TYPE_DP 0 |
| # define DP_DS_PORT_TYPE_VGA 1 |
| # define DP_DS_PORT_TYPE_DVI 2 |
| # define DP_DS_PORT_TYPE_HDMI 3 |
| # define DP_DS_PORT_TYPE_NON_EDID 4 |
| # define DP_DS_PORT_TYPE_DP_DUALMODE 5 |
| # define DP_DS_PORT_TYPE_WIRELESS 6 |
| # define DP_DS_PORT_HPD (1 << 3) |
| /* offset 1 for VGA is maximum megapixels per second / 8 */ |
| /* offset 2 */ |
| # define DP_DS_MAX_BPC_MASK (3 << 0) |
| # define DP_DS_8BPC 0 |
| # define DP_DS_10BPC 1 |
| # define DP_DS_12BPC 2 |
| # define DP_DS_16BPC 3 |
| |
| #define DP_MAX_DOWNSTREAM_PORTS 0x10 |
| |
| /* DP Forward error Correction Registers */ |
| #define DP_FEC_CAPABILITY 0x090 /* 1.4 */ |
| # define DP_FEC_CAPABLE (1 << 0) |
| # define DP_FEC_UNCORR_BLK_ERROR_COUNT_CAP (1 << 1) |
| # define DP_FEC_CORR_BLK_ERROR_COUNT_CAP (1 << 2) |
| # define DP_FEC_BIT_ERROR_COUNT_CAP (1 << 3) |
| |
| /* DP Extended DSC Capabilities */ |
| #define DP_DSC_BRANCH_OVERALL_THROUGHPUT_0 0x0a0 /* DP 1.4a SCR */ |
| #define DP_DSC_BRANCH_OVERALL_THROUGHPUT_1 0x0a1 |
| #define DP_DSC_BRANCH_MAX_LINE_WIDTH 0x0a2 |
| |
| /* link configuration */ |
| #define DP_LINK_BW_SET 0x100 |
| # define DP_LINK_RATE_TABLE 0x00 /* eDP 1.4 */ |
| # define DP_LINK_BW_1_62 0x06 |
| # define DP_LINK_BW_2_7 0x0a |
| # define DP_LINK_BW_5_4 0x14 /* 1.2 */ |
| # define DP_LINK_BW_8_1 0x1e /* 1.4 */ |
| |
| #define DP_LANE_COUNT_SET 0x101 |
| # define DP_LANE_COUNT_MASK 0x0f |
| # define DP_LANE_COUNT_ENHANCED_FRAME_EN (1 << 7) |
| |
| #define DP_TRAINING_PATTERN_SET 0x102 |
| # define DP_TRAINING_PATTERN_DISABLE 0 |
| # define DP_TRAINING_PATTERN_1 1 |
| # define DP_TRAINING_PATTERN_2 2 |
| # define DP_TRAINING_PATTERN_3 3 /* 1.2 */ |
| # define DP_TRAINING_PATTERN_4 7 /* 1.4 */ |
| # define DP_TRAINING_PATTERN_MASK 0x3 |
| # define DP_TRAINING_PATTERN_MASK_1_4 0xf |
| |
| /* DPCD 1.1 only. For DPCD >= 1.2 see per-lane DP_LINK_QUAL_LANEn_SET */ |
| # define DP_LINK_QUAL_PATTERN_11_DISABLE (0 << 2) |
| # define DP_LINK_QUAL_PATTERN_11_D10_2 (1 << 2) |
| # define DP_LINK_QUAL_PATTERN_11_ERROR_RATE (2 << 2) |
| # define DP_LINK_QUAL_PATTERN_11_PRBS7 (3 << 2) |
| # define DP_LINK_QUAL_PATTERN_11_MASK (3 << 2) |
| |
| # define DP_RECOVERED_CLOCK_OUT_EN (1 << 4) |
| # define DP_LINK_SCRAMBLING_DISABLE (1 << 5) |
| |
| # define DP_SYMBOL_ERROR_COUNT_BOTH (0 << 6) |
| # define DP_SYMBOL_ERROR_COUNT_DISPARITY (1 << 6) |
| # define DP_SYMBOL_ERROR_COUNT_SYMBOL (2 << 6) |
| # define DP_SYMBOL_ERROR_COUNT_MASK (3 << 6) |
| |
| #define DP_TRAINING_LANE0_SET 0x103 |
| #define DP_TRAINING_LANE1_SET 0x104 |
| #define DP_TRAINING_LANE2_SET 0x105 |
| #define DP_TRAINING_LANE3_SET 0x106 |
| |
| # define DP_TRAIN_VOLTAGE_SWING_MASK 0x3 |
| # define DP_TRAIN_VOLTAGE_SWING_SHIFT 0 |
| # define DP_TRAIN_MAX_SWING_REACHED (1 << 2) |
| # define DP_TRAIN_VOLTAGE_SWING_LEVEL_0 (0 << 0) |
| # define DP_TRAIN_VOLTAGE_SWING_LEVEL_1 (1 << 0) |
| # define DP_TRAIN_VOLTAGE_SWING_LEVEL_2 (2 << 0) |
| # define DP_TRAIN_VOLTAGE_SWING_LEVEL_3 (3 << 0) |
| |
| # define DP_TRAIN_PRE_EMPHASIS_MASK (3 << 3) |
| # define DP_TRAIN_PRE_EMPH_LEVEL_0 (0 << 3) |
| # define DP_TRAIN_PRE_EMPH_LEVEL_1 (1 << 3) |
| # define DP_TRAIN_PRE_EMPH_LEVEL_2 (2 << 3) |
| # define DP_TRAIN_PRE_EMPH_LEVEL_3 (3 << 3) |
| |
| # define DP_TRAIN_PRE_EMPHASIS_SHIFT 3 |
| # define DP_TRAIN_MAX_PRE_EMPHASIS_REACHED (1 << 5) |
| |
| #define DP_DOWNSPREAD_CTRL 0x107 |
| # define DP_SPREAD_AMP_0_5 (1 << 4) |
| # define DP_MSA_TIMING_PAR_IGNORE_EN (1 << 7) /* eDP */ |
| |
| #define DP_MAIN_LINK_CHANNEL_CODING_SET 0x108 |
| # define DP_SET_ANSI_8B10B (1 << 0) |
| |
| #define DP_I2C_SPEED_CONTROL_STATUS 0x109 /* DPI */ |
| /* bitmask as for DP_I2C_SPEED_CAP */ |
| |
| #define DP_EDP_CONFIGURATION_SET 0x10a /* XXX 1.2? */ |
| # define DP_ALTERNATE_SCRAMBLER_RESET_ENABLE (1 << 0) |
| # define DP_FRAMING_CHANGE_ENABLE (1 << 1) |
| # define DP_PANEL_SELF_TEST_ENABLE (1 << 7) |
| |
| #define DP_LINK_QUAL_LANE0_SET 0x10b /* DPCD >= 1.2 */ |
| #define DP_LINK_QUAL_LANE1_SET 0x10c |
| #define DP_LINK_QUAL_LANE2_SET 0x10d |
| #define DP_LINK_QUAL_LANE3_SET 0x10e |
| # define DP_LINK_QUAL_PATTERN_DISABLE 0 |
| # define DP_LINK_QUAL_PATTERN_D10_2 1 |
| # define DP_LINK_QUAL_PATTERN_ERROR_RATE 2 |
| # define DP_LINK_QUAL_PATTERN_PRBS7 3 |
| # define DP_LINK_QUAL_PATTERN_80BIT_CUSTOM 4 |
| # define DP_LINK_QUAL_PATTERN_HBR2_EYE 5 |
| # define DP_LINK_QUAL_PATTERN_MASK 7 |
| |
| #define DP_TRAINING_LANE0_1_SET2 0x10f |
| #define DP_TRAINING_LANE2_3_SET2 0x110 |
| # define DP_LANE02_POST_CURSOR2_SET_MASK (3 << 0) |
| # define DP_LANE02_MAX_POST_CURSOR2_REACHED (1 << 2) |
| # define DP_LANE13_POST_CURSOR2_SET_MASK (3 << 4) |
| # define DP_LANE13_MAX_POST_CURSOR2_REACHED (1 << 6) |
| |
| #define DP_MSTM_CTRL 0x111 /* 1.2 */ |
| # define DP_MST_EN (1 << 0) |
| # define DP_UP_REQ_EN (1 << 1) |
| # define DP_UPSTREAM_IS_SRC (1 << 2) |
| |
| #define DP_AUDIO_DELAY0 0x112 /* 1.2 */ |
| #define DP_AUDIO_DELAY1 0x113 |
| #define DP_AUDIO_DELAY2 0x114 |
| |
| #define DP_LINK_RATE_SET 0x115 /* eDP 1.4 */ |
| # define DP_LINK_RATE_SET_SHIFT 0 |
| # define DP_LINK_RATE_SET_MASK (7 << 0) |
| |
| #define DP_RECEIVER_ALPM_CONFIG 0x116 /* eDP 1.4 */ |
| # define DP_ALPM_ENABLE (1 << 0) |
| # define DP_ALPM_LOCK_ERROR_IRQ_HPD_ENABLE (1 << 1) |
| |
| #define DP_SINK_DEVICE_AUX_FRAME_SYNC_CONF 0x117 /* eDP 1.4 */ |
| # define DP_AUX_FRAME_SYNC_ENABLE (1 << 0) |
| # define DP_IRQ_HPD_ENABLE (1 << 1) |
| |
| #define DP_UPSTREAM_DEVICE_DP_PWR_NEED 0x118 /* 1.2 */ |
| # define DP_PWR_NOT_NEEDED (1 << 0) |
| |
| #define DP_FEC_CONFIGURATION 0x120 /* 1.4 */ |
| # define DP_FEC_READY (1 << 0) |
| # define DP_FEC_ERR_COUNT_SEL_MASK (7 << 1) |
| # define DP_FEC_ERR_COUNT_DIS (0 << 1) |
| # define DP_FEC_UNCORR_BLK_ERROR_COUNT (1 << 1) |
| # define DP_FEC_CORR_BLK_ERROR_COUNT (2 << 1) |
| # define DP_FEC_BIT_ERROR_COUNT (3 << 1) |
| # define DP_FEC_LANE_SELECT_MASK (3 << 4) |
| # define DP_FEC_LANE_0_SELECT (0 << 4) |
| # define DP_FEC_LANE_1_SELECT (1 << 4) |
| # define DP_FEC_LANE_2_SELECT (2 << 4) |
| # define DP_FEC_LANE_3_SELECT (3 << 4) |
| |
| #define DP_AUX_FRAME_SYNC_VALUE 0x15c /* eDP 1.4 */ |
| # define DP_AUX_FRAME_SYNC_VALID (1 << 0) |
| |
| #define DP_DSC_ENABLE 0x160 /* DP 1.4 */ |
| # define DP_DECOMPRESSION_EN (1 << 0) |
| |
| #define DP_PSR_EN_CFG 0x170 /* XXX 1.2? */ |
| # define DP_PSR_ENABLE (1 << 0) |
| # define DP_PSR_MAIN_LINK_ACTIVE (1 << 1) |
| # define DP_PSR_CRC_VERIFICATION (1 << 2) |
| # define DP_PSR_FRAME_CAPTURE (1 << 3) |
| # define DP_PSR_SELECTIVE_UPDATE (1 << 4) |
| # define DP_PSR_IRQ_HPD_WITH_CRC_ERRORS (1 << 5) |
| # define DP_PSR_ENABLE_PSR2 (1 << 6) /* eDP 1.4a */ |
| |
| #define DP_ADAPTER_CTRL 0x1a0 |
| # define DP_ADAPTER_CTRL_FORCE_LOAD_SENSE (1 << 0) |
| |
| #define DP_BRANCH_DEVICE_CTRL 0x1a1 |
| # define DP_BRANCH_DEVICE_IRQ_HPD (1 << 0) |
| |
| #define DP_PAYLOAD_ALLOCATE_SET 0x1c0 |
| #define DP_PAYLOAD_ALLOCATE_START_TIME_SLOT 0x1c1 |
| #define DP_PAYLOAD_ALLOCATE_TIME_SLOT_COUNT 0x1c2 |
| |
| #define DP_SINK_COUNT 0x200 |
| /* prior to 1.2 bit 7 was reserved mbz */ |
| # define DP_GET_SINK_COUNT(x) ((((x) & 0x80) >> 1) | ((x) & 0x3f)) |
| # define DP_SINK_CP_READY (1 << 6) |
| |
| #define DP_DEVICE_SERVICE_IRQ_VECTOR 0x201 |
| # define DP_REMOTE_CONTROL_COMMAND_PENDING (1 << 0) |
| # define DP_AUTOMATED_TEST_REQUEST (1 << 1) |
| # define DP_CP_IRQ (1 << 2) |
| # define DP_MCCS_IRQ (1 << 3) |
| # define DP_DOWN_REP_MSG_RDY (1 << 4) /* 1.2 MST */ |
| # define DP_UP_REQ_MSG_RDY (1 << 5) /* 1.2 MST */ |
| # define DP_SINK_SPECIFIC_IRQ (1 << 6) |
| |
| #define DP_LANE0_1_STATUS 0x202 |
| #define DP_LANE2_3_STATUS 0x203 |
| # define DP_LANE_CR_DONE (1 << 0) |
| # define DP_LANE_CHANNEL_EQ_DONE (1 << 1) |
| # define DP_LANE_SYMBOL_LOCKED (1 << 2) |
| |
| #define DP_CHANNEL_EQ_BITS (DP_LANE_CR_DONE | \ |
| DP_LANE_CHANNEL_EQ_DONE | \ |
| DP_LANE_SYMBOL_LOCKED) |
| |
| #define DP_LANE_ALIGN_STATUS_UPDATED 0x204 |
| |
| #define DP_INTERLANE_ALIGN_DONE (1 << 0) |
| #define DP_DOWNSTREAM_PORT_STATUS_CHANGED (1 << 6) |
| #define DP_LINK_STATUS_UPDATED (1 << 7) |
| |
| #define DP_SINK_STATUS 0x205 |
| |
| #define DP_RECEIVE_PORT_0_STATUS (1 << 0) |
| #define DP_RECEIVE_PORT_1_STATUS (1 << 1) |
| |
| #define DP_ADJUST_REQUEST_LANE0_1 0x206 |
| #define DP_ADJUST_REQUEST_LANE2_3 0x207 |
| # define DP_ADJUST_VOLTAGE_SWING_LANE0_MASK 0x03 |
| # define DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT 0 |
| # define DP_ADJUST_PRE_EMPHASIS_LANE0_MASK 0x0c |
| # define DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT 2 |
| # define DP_ADJUST_VOLTAGE_SWING_LANE1_MASK 0x30 |
| # define DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT 4 |
| # define DP_ADJUST_PRE_EMPHASIS_LANE1_MASK 0xc0 |
| # define DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT 6 |
| |
| #define DP_ADJUST_REQUEST_POST_CURSOR2 0x20c |
| # define DP_ADJUST_POST_CURSOR2_LANE0_MASK 0x03 |
| # define DP_ADJUST_POST_CURSOR2_LANE0_SHIFT 0 |
| # define DP_ADJUST_POST_CURSOR2_LANE1_MASK 0x0c |
| # define DP_ADJUST_POST_CURSOR2_LANE1_SHIFT 2 |
| # define DP_ADJUST_POST_CURSOR2_LANE2_MASK 0x30 |
| # define DP_ADJUST_POST_CURSOR2_LANE2_SHIFT 4 |
| # define DP_ADJUST_POST_CURSOR2_LANE3_MASK 0xc0 |
| # define DP_ADJUST_POST_CURSOR2_LANE3_SHIFT 6 |
| |
| #define DP_TEST_REQUEST 0x218 |
| # define DP_TEST_LINK_TRAINING (1 << 0) |
| # define DP_TEST_LINK_VIDEO_PATTERN (1 << 1) |
| # define DP_TEST_LINK_EDID_READ (1 << 2) |
| # define DP_TEST_LINK_PHY_TEST_PATTERN (1 << 3) /* DPCD >= 1.1 */ |
| # define DP_TEST_LINK_FAUX_PATTERN (1 << 4) /* DPCD >= 1.2 */ |
| # define DP_TEST_LINK_AUDIO_PATTERN (1 << 5) /* DPCD >= 1.2 */ |
| # define DP_TEST_LINK_AUDIO_DISABLED_VIDEO (1 << 6) /* DPCD >= 1.2 */ |
| |
| #define DP_TEST_LINK_RATE 0x219 |
| # define DP_LINK_RATE_162 (0x6) |
| # define DP_LINK_RATE_27 (0xa) |
| |
| #define DP_TEST_LANE_COUNT 0x220 |
| |
| #define DP_TEST_PATTERN 0x221 |
| # define DP_NO_TEST_PATTERN 0x0 |
| # define DP_COLOR_RAMP 0x1 |
| # define DP_BLACK_AND_WHITE_VERTICAL_LINES 0x2 |
| # define DP_COLOR_SQUARE 0x3 |
| |
| #define DP_TEST_H_TOTAL_HI 0x222 |
| #define DP_TEST_H_TOTAL_LO 0x223 |
| |
| #define DP_TEST_V_TOTAL_HI 0x224 |
| #define DP_TEST_V_TOTAL_LO 0x225 |
| |
| #define DP_TEST_H_START_HI 0x226 |
| #define DP_TEST_H_START_LO 0x227 |
| |
| #define DP_TEST_V_START_HI 0x228 |
| #define DP_TEST_V_START_LO 0x229 |
| |
| #define DP_TEST_HSYNC_HI 0x22A |
| # define DP_TEST_HSYNC_POLARITY (1 << 7) |
| # define DP_TEST_HSYNC_WIDTH_HI_MASK (127 << 0) |
| #define DP_TEST_HSYNC_WIDTH_LO 0x22B |
| |
| #define DP_TEST_VSYNC_HI 0x22C |
| # define DP_TEST_VSYNC_POLARITY (1 << 7) |
| # define DP_TEST_VSYNC_WIDTH_HI_MASK (127 << 0) |
| #define DP_TEST_VSYNC_WIDTH_LO 0x22D |
| |
| #define DP_TEST_H_WIDTH_HI 0x22E |
| #define DP_TEST_H_WIDTH_LO 0x22F |
| |
| #define DP_TEST_V_HEIGHT_HI 0x230 |
| #define DP_TEST_V_HEIGHT_LO 0x231 |
| |
| #define DP_TEST_MISC0 0x232 |
| # define DP_TEST_SYNC_CLOCK (1 << 0) |
| # define DP_TEST_COLOR_FORMAT_MASK (3 << 1) |
| # define DP_TEST_COLOR_FORMAT_SHIFT 1 |
| # define DP_COLOR_FORMAT_RGB (0 << 1) |
| # define DP_COLOR_FORMAT_YCbCr422 (1 << 1) |
| # define DP_COLOR_FORMAT_YCbCr444 (2 << 1) |
| # define DP_TEST_DYNAMIC_RANGE_VESA (0 << 3) |
| # define DP_TEST_DYNAMIC_RANGE_CEA (1 << 3) |
| # define DP_TEST_YCBCR_COEFFICIENTS (1 << 4) |
| # define DP_YCBCR_COEFFICIENTS_ITU601 (0 << 4) |
| # define DP_YCBCR_COEFFICIENTS_ITU709 (1 << 4) |
| # define DP_TEST_BIT_DEPTH_MASK (7 << 5) |
| # define DP_TEST_BIT_DEPTH_SHIFT 5 |
| # define DP_TEST_BIT_DEPTH_6 (0 << 5) |
| # define DP_TEST_BIT_DEPTH_8 (1 << 5) |
| # define DP_TEST_BIT_DEPTH_10 (2 << 5) |
| # define DP_TEST_BIT_DEPTH_12 (3 << 5) |
| # define DP_TEST_BIT_DEPTH_16 (4 << 5) |
| |
| #define DP_TEST_MISC1 0x233 |
| # define DP_TEST_REFRESH_DENOMINATOR (1 << 0) |
| # define DP_TEST_INTERLACED (1 << 1) |
| |
| #define DP_TEST_REFRESH_RATE_NUMERATOR 0x234 |
| |
| #define DP_TEST_MISC0 0x232 |
| |
| #define DP_TEST_CRC_R_CR 0x240 |
| #define DP_TEST_CRC_G_Y 0x242 |
| #define DP_TEST_CRC_B_CB 0x244 |
| |
| #define DP_TEST_SINK_MISC 0x246 |
| # define DP_TEST_CRC_SUPPORTED (1 << 5) |
| # define DP_TEST_COUNT_MASK 0xf |
| |
| #define DP_PHY_TEST_PATTERN 0x248 |
| # define DP_PHY_TEST_PATTERN_SEL_MASK 0x7 |
| # define DP_PHY_TEST_PATTERN_NONE 0x0 |
| # define DP_PHY_TEST_PATTERN_D10_2 0x1 |
| # define DP_PHY_TEST_PATTERN_ERROR_COUNT 0x2 |
| # define DP_PHY_TEST_PATTERN_PRBS7 0x3 |
| # define DP_PHY_TEST_PATTERN_80BIT_CUSTOM 0x4 |
| # define DP_PHY_TEST_PATTERN_CP2520 0x5 |
| |
| #define DP_TEST_HBR2_SCRAMBLER_RESET 0x24A |
| #define DP_TEST_80BIT_CUSTOM_PATTERN_7_0 0x250 |
| #define DP_TEST_80BIT_CUSTOM_PATTERN_15_8 0x251 |
| #define DP_TEST_80BIT_CUSTOM_PATTERN_23_16 0x252 |
| #define DP_TEST_80BIT_CUSTOM_PATTERN_31_24 0x253 |
| #define DP_TEST_80BIT_CUSTOM_PATTERN_39_32 0x254 |
| #define DP_TEST_80BIT_CUSTOM_PATTERN_47_40 0x255 |
| #define DP_TEST_80BIT_CUSTOM_PATTERN_55_48 0x256 |
| #define DP_TEST_80BIT_CUSTOM_PATTERN_63_56 0x257 |
| #define DP_TEST_80BIT_CUSTOM_PATTERN_71_64 0x258 |
| #define DP_TEST_80BIT_CUSTOM_PATTERN_79_72 0x259 |
| |
| #define DP_TEST_RESPONSE 0x260 |
| # define DP_TEST_ACK (1 << 0) |
| # define DP_TEST_NAK (1 << 1) |
| # define DP_TEST_EDID_CHECKSUM_WRITE (1 << 2) |
| |
| #define DP_TEST_EDID_CHECKSUM 0x261 |
| |
| #define DP_TEST_SINK 0x270 |
| # define DP_TEST_SINK_START (1 << 0) |
| #define DP_TEST_AUDIO_MODE 0x271 |
| #define DP_TEST_AUDIO_PATTERN_TYPE 0x272 |
| #define DP_TEST_AUDIO_PERIOD_CH1 0x273 |
| #define DP_TEST_AUDIO_PERIOD_CH2 0x274 |
| #define DP_TEST_AUDIO_PERIOD_CH3 0x275 |
| #define DP_TEST_AUDIO_PERIOD_CH4 0x276 |
| #define DP_TEST_AUDIO_PERIOD_CH5 0x277 |
| #define DP_TEST_AUDIO_PERIOD_CH6 0x278 |
| #define DP_TEST_AUDIO_PERIOD_CH7 0x279 |
| #define DP_TEST_AUDIO_PERIOD_CH8 0x27A |
| |
| #define DP_FEC_STATUS 0x280 /* 1.4 */ |
| # define DP_FEC_DECODE_EN_DETECTED (1 << 0) |
| # define DP_FEC_DECODE_DIS_DETECTED (1 << 1) |
| |
| #define DP_FEC_ERROR_COUNT_LSB 0x0281 /* 1.4 */ |
| |
| #define DP_FEC_ERROR_COUNT_MSB 0x0282 /* 1.4 */ |
| # define DP_FEC_ERROR_COUNT_MASK 0x7F |
| # define DP_FEC_ERR_COUNT_VALID (1 << 7) |
| |
| #define DP_PAYLOAD_TABLE_UPDATE_STATUS 0x2c0 /* 1.2 MST */ |
| # define DP_PAYLOAD_TABLE_UPDATED (1 << 0) |
| # define DP_PAYLOAD_ACT_HANDLED (1 << 1) |
| |
| #define DP_VC_PAYLOAD_ID_SLOT_1 0x2c1 /* 1.2 MST */ |
| /* up to ID_SLOT_63 at 0x2ff */ |
| |
| #define DP_SOURCE_OUI 0x300 |
| #define DP_SINK_OUI 0x400 |
| #define DP_BRANCH_OUI 0x500 |
| #define DP_BRANCH_ID 0x503 |
| #define DP_BRANCH_REVISION_START 0x509 |
| #define DP_BRANCH_HW_REV 0x509 |
| #define DP_BRANCH_SW_REV 0x50A |
| |
| #define DP_SET_POWER 0x600 |
| # define DP_SET_POWER_D0 0x1 |
| # define DP_SET_POWER_D3 0x2 |
| # define DP_SET_POWER_MASK 0x3 |
| # define DP_SET_POWER_D3_AUX_ON 0x5 |
| |
| #define DP_EDP_DPCD_REV 0x700 /* eDP 1.2 */ |
| # define DP_EDP_11 0x00 |
| # define DP_EDP_12 0x01 |
| # define DP_EDP_13 0x02 |
| # define DP_EDP_14 0x03 |
| # define DP_EDP_14a 0x04 /* eDP 1.4a */ |
| # define DP_EDP_14b 0x05 /* eDP 1.4b */ |
| |
| #define DP_EDP_GENERAL_CAP_1 0x701 |
| # define DP_EDP_TCON_BACKLIGHT_ADJUSTMENT_CAP (1 << 0) |
| # define DP_EDP_BACKLIGHT_PIN_ENABLE_CAP (1 << 1) |
| # define DP_EDP_BACKLIGHT_AUX_ENABLE_CAP (1 << 2) |
| # define DP_EDP_PANEL_SELF_TEST_PIN_ENABLE_CAP (1 << 3) |
| # define DP_EDP_PANEL_SELF_TEST_AUX_ENABLE_CAP (1 << 4) |
| # define DP_EDP_FRC_ENABLE_CAP (1 << 5) |
| # define DP_EDP_COLOR_ENGINE_CAP (1 << 6) |
| # define DP_EDP_SET_POWER_CAP (1 << 7) |
| |
| #define DP_EDP_BACKLIGHT_ADJUSTMENT_CAP 0x702 |
| # define DP_EDP_BACKLIGHT_BRIGHTNESS_PWM_PIN_CAP (1 << 0) |
| # define DP_EDP_BACKLIGHT_BRIGHTNESS_AUX_SET_CAP (1 << 1) |
| # define DP_EDP_BACKLIGHT_BRIGHTNESS_BYTE_COUNT (1 << 2) |
| # define DP_EDP_BACKLIGHT_AUX_PWM_PRODUCT_CAP (1 << 3) |
| # define DP_EDP_BACKLIGHT_FREQ_PWM_PIN_PASSTHRU_CAP (1 << 4) |
| # define DP_EDP_BACKLIGHT_FREQ_AUX_SET_CAP (1 << 5) |
| # define DP_EDP_DYNAMIC_BACKLIGHT_CAP (1 << 6) |
| # define DP_EDP_VBLANK_BACKLIGHT_UPDATE_CAP (1 << 7) |
| |
| #define DP_EDP_GENERAL_CAP_2 0x703 |
| # define DP_EDP_OVERDRIVE_ENGINE_ENABLED (1 << 0) |
| |
| #define DP_EDP_GENERAL_CAP_3 0x704 /* eDP 1.4 */ |
| # define DP_EDP_X_REGION_CAP_MASK (0xf << 0) |
| # define DP_EDP_X_REGION_CAP_SHIFT 0 |
| # define DP_EDP_Y_REGION_CAP_MASK (0xf << 4) |
| # define DP_EDP_Y_REGION_CAP_SHIFT 4 |
| |
| #define DP_EDP_DISPLAY_CONTROL_REGISTER 0x720 |
| # define DP_EDP_BACKLIGHT_ENABLE (1 << 0) |
| # define DP_EDP_BLACK_VIDEO_ENABLE (1 << 1) |
| # define DP_EDP_FRC_ENABLE (1 << 2) |
| # define DP_EDP_COLOR_ENGINE_ENABLE (1 << 3) |
| # define DP_EDP_VBLANK_BACKLIGHT_UPDATE_ENABLE (1 << 7) |
| |
| #define DP_EDP_BACKLIGHT_MODE_SET_REGISTER 0x721 |
| # define DP_EDP_BACKLIGHT_CONTROL_MODE_MASK (3 << 0) |
| # define DP_EDP_BACKLIGHT_CONTROL_MODE_PWM (0 << 0) |
| # define DP_EDP_BACKLIGHT_CONTROL_MODE_PRESET (1 << 0) |
| # define DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD (2 << 0) |
| # define DP_EDP_BACKLIGHT_CONTROL_MODE_PRODUCT (3 << 0) |
| # define DP_EDP_BACKLIGHT_FREQ_PWM_PIN_PASSTHRU_ENABLE (1 << 2) |
| # define DP_EDP_BACKLIGHT_FREQ_AUX_SET_ENABLE (1 << 3) |
| # define DP_EDP_DYNAMIC_BACKLIGHT_ENABLE (1 << 4) |
| # define DP_EDP_REGIONAL_BACKLIGHT_ENABLE (1 << 5) |
| # define DP_EDP_UPDATE_REGION_BRIGHTNESS (1 << 6) /* eDP 1.4 */ |
| |
| #define DP_EDP_BACKLIGHT_BRIGHTNESS_MSB 0x722 |
| #define DP_EDP_BACKLIGHT_BRIGHTNESS_LSB 0x723 |
| |
| #define DP_EDP_PWMGEN_BIT_COUNT 0x724 |
| #define DP_EDP_PWMGEN_BIT_COUNT_CAP_MIN 0x725 |
| #define DP_EDP_PWMGEN_BIT_COUNT_CAP_MAX 0x726 |
| # define DP_EDP_PWMGEN_BIT_COUNT_MASK (0x1f << 0) |
| |
| #define DP_EDP_BACKLIGHT_CONTROL_STATUS 0x727 |
| |
| #define DP_EDP_BACKLIGHT_FREQ_SET 0x728 |
| # define DP_EDP_BACKLIGHT_FREQ_BASE_KHZ 27000 |
| |
| #define DP_EDP_BACKLIGHT_FREQ_CAP_MIN_MSB 0x72a |
| #define DP_EDP_BACKLIGHT_FREQ_CAP_MIN_MID 0x72b |
| #define DP_EDP_BACKLIGHT_FREQ_CAP_MIN_LSB 0x72c |
| |
| #define DP_EDP_BACKLIGHT_FREQ_CAP_MAX_MSB 0x72d |
| #define DP_EDP_BACKLIGHT_FREQ_CAP_MAX_MID 0x72e |
| #define DP_EDP_BACKLIGHT_FREQ_CAP_MAX_LSB 0x72f |
| |
| #define DP_EDP_DBC_MINIMUM_BRIGHTNESS_SET 0x732 |
| #define DP_EDP_DBC_MAXIMUM_BRIGHTNESS_SET 0x733 |
| |
| #define DP_EDP_REGIONAL_BACKLIGHT_BASE 0x740 /* eDP 1.4 */ |
| #define DP_EDP_REGIONAL_BACKLIGHT_0 0x741 /* eDP 1.4 */ |
| |
| #define DP_SIDEBAND_MSG_DOWN_REQ_BASE 0x1000 /* 1.2 MST */ |
| #define DP_SIDEBAND_MSG_UP_REP_BASE 0x1200 /* 1.2 MST */ |
| #define DP_SIDEBAND_MSG_DOWN_REP_BASE 0x1400 /* 1.2 MST */ |
| #define DP_SIDEBAND_MSG_UP_REQ_BASE 0x1600 /* 1.2 MST */ |
| |
| #define DP_SINK_COUNT_ESI 0x2002 /* 1.2 */ |
| /* 0-5 sink count */ |
| # define DP_SINK_COUNT_CP_READY (1 << 6) |
| |
| #define DP_DEVICE_SERVICE_IRQ_VECTOR_ESI0 0x2003 /* 1.2 */ |
| |
| #define DP_DEVICE_SERVICE_IRQ_VECTOR_ESI1 0x2004 /* 1.2 */ |
| # define DP_RX_GTC_MSTR_REQ_STATUS_CHANGE (1 << 0) |
| # define DP_LOCK_ACQUISITION_REQUEST (1 << 1) |
| # define DP_CEC_IRQ (1 << 2) |
| |
| #define DP_LINK_SERVICE_IRQ_VECTOR_ESI0 0x2005 /* 1.2 */ |
| |
| #define DP_PSR_ERROR_STATUS 0x2006 /* XXX 1.2? */ |
| # define DP_PSR_LINK_CRC_ERROR (1 << 0) |
| # define DP_PSR_RFB_STORAGE_ERROR (1 << 1) |
| # define DP_PSR_VSC_SDP_UNCORRECTABLE_ERROR (1 << 2) /* eDP 1.4 */ |
| |
| #define DP_PSR_ESI 0x2007 /* XXX 1.2? */ |
| # define DP_PSR_CAPS_CHANGE (1 << 0) |
| |
| #define DP_PSR_STATUS 0x2008 /* XXX 1.2? */ |
| # define DP_PSR_SINK_INACTIVE 0 |
| # define DP_PSR_SINK_ACTIVE_SRC_SYNCED 1 |
| # define DP_PSR_SINK_ACTIVE_RFB 2 |
| # define DP_PSR_SINK_ACTIVE_SINK_SYNCED 3 |
| # define DP_PSR_SINK_ACTIVE_RESYNC 4 |
| # define DP_PSR_SINK_INTERNAL_ERROR 7 |
| # define DP_PSR_SINK_STATE_MASK 0x07 |
| |
| #define DP_SYNCHRONIZATION_LATENCY_IN_SINK 0x2009 /* edp 1.4 */ |
| # define DP_MAX_RESYNC_FRAME_COUNT_MASK (0xf << 0) |
| # define DP_MAX_RESYNC_FRAME_COUNT_SHIFT 0 |
| # define DP_LAST_ACTUAL_SYNCHRONIZATION_LATENCY_MASK (0xf << 4) |
| # define DP_LAST_ACTUAL_SYNCHRONIZATION_LATENCY_SHIFT 4 |
| |
| #define DP_LAST_RECEIVED_PSR_SDP 0x200a /* eDP 1.2 */ |
| # define DP_PSR_STATE_BIT (1 << 0) /* eDP 1.2 */ |
| # define DP_UPDATE_RFB_BIT (1 << 1) /* eDP 1.2 */ |
| # define DP_CRC_VALID_BIT (1 << 2) /* eDP 1.2 */ |
| # define DP_SU_VALID (1 << 3) /* eDP 1.4 */ |
| # define DP_FIRST_SCAN_LINE_SU_REGION (1 << 4) /* eDP 1.4 */ |
| # define DP_LAST_SCAN_LINE_SU_REGION (1 << 5) /* eDP 1.4 */ |
| # define DP_Y_COORDINATE_VALID (1 << 6) /* eDP 1.4a */ |
| |
| #define DP_RECEIVER_ALPM_STATUS 0x200b /* eDP 1.4 */ |
| # define DP_ALPM_LOCK_TIMEOUT_ERROR (1 << 0) |
| |
| #define DP_LANE0_1_STATUS_ESI 0x200c /* status same as 0x202 */ |
| #define DP_LANE2_3_STATUS_ESI 0x200d /* status same as 0x203 */ |
| #define DP_LANE_ALIGN_STATUS_UPDATED_ESI 0x200e /* status same as 0x204 */ |
| #define DP_SINK_STATUS_ESI 0x200f /* status same as 0x205 */ |
| |
| #define DP_DP13_DPCD_REV 0x2200 |
| #define DP_DP13_MAX_LINK_RATE 0x2201 |
| |
| #define DP_DPRX_FEATURE_ENUMERATION_LIST 0x2210 /* DP 1.3 */ |
| # define DP_GTC_CAP (1 << 0) /* DP 1.3 */ |
| # define DP_SST_SPLIT_SDP_CAP (1 << 1) /* DP 1.4 */ |
| # define DP_AV_SYNC_CAP (1 << 2) /* DP 1.3 */ |
| # define DP_VSC_SDP_EXT_FOR_COLORIMETRY_SUPPORTED (1 << 3) /* DP 1.3 */ |
| # define DP_VSC_EXT_VESA_SDP_SUPPORTED (1 << 4) /* DP 1.4 */ |
| # define DP_VSC_EXT_VESA_SDP_CHAINING_SUPPORTED (1 << 5) /* DP 1.4 */ |
| # define DP_VSC_EXT_CEA_SDP_SUPPORTED (1 << 6) /* DP 1.4 */ |
| # define DP_VSC_EXT_CEA_SDP_CHAINING_SUPPORTED (1 << 7) /* DP 1.4 */ |
| |
| /* HDMI CEC tunneling over AUX DP 1.3 section 5.3.3.3.1 DPCD 1.4+ */ |
| #define DP_CEC_TUNNELING_CAPABILITY 0x3000 |
| # define DP_CEC_TUNNELING_CAPABLE (1 << 0) |
| # define DP_CEC_SNOOPING_CAPABLE (1 << 1) |
| # define DP_CEC_MULTIPLE_LA_CAPABLE (1 << 2) |
| |
| #define DP_CEC_TUNNELING_CONTROL 0x3001 |
| # define DP_CEC_TUNNELING_ENABLE (1 << 0) |
| # define DP_CEC_SNOOPING_ENABLE (1 << 1) |
| |
| #define DP_CEC_RX_MESSAGE_INFO 0x3002 |
| # define DP_CEC_RX_MESSAGE_LEN_MASK (0xf << 0) |
| # define DP_CEC_RX_MESSAGE_LEN_SHIFT 0 |
| # define DP_CEC_RX_MESSAGE_HPD_STATE (1 << 4) |
| # define DP_CEC_RX_MESSAGE_HPD_LOST (1 << 5) |
| # define DP_CEC_RX_MESSAGE_ACKED (1 << 6) |
| # define DP_CEC_RX_MESSAGE_ENDED (1 << 7) |
| |
| #define DP_CEC_TX_MESSAGE_INFO 0x3003 |
| # define DP_CEC_TX_MESSAGE_LEN_MASK (0xf << 0) |
| # define DP_CEC_TX_MESSAGE_LEN_SHIFT 0 |
| # define DP_CEC_TX_RETRY_COUNT_MASK (0x7 << 4) |
| # define DP_CEC_TX_RETRY_COUNT_SHIFT 4 |
| # define DP_CEC_TX_MESSAGE_SEND (1 << 7) |
| |
| #define DP_CEC_TUNNELING_IRQ_FLAGS 0x3004 |
| # define DP_CEC_RX_MESSAGE_INFO_VALID (1 << 0) |
| # define DP_CEC_RX_MESSAGE_OVERFLOW (1 << 1) |
| # define DP_CEC_TX_MESSAGE_SENT (1 << 4) |
| # define DP_CEC_TX_LINE_ERROR (1 << 5) |
| # define DP_CEC_TX_ADDRESS_NACK_ERROR (1 << 6) |
| # define DP_CEC_TX_DATA_NACK_ERROR (1 << 7) |
| |
| #define DP_CEC_LOGICAL_ADDRESS_MASK 0x300E /* 0x300F word */ |
| # define DP_CEC_LOGICAL_ADDRESS_0 (1 << 0) |
| # define DP_CEC_LOGICAL_ADDRESS_1 (1 << 1) |
| # define DP_CEC_LOGICAL_ADDRESS_2 (1 << 2) |
| # define DP_CEC_LOGICAL_ADDRESS_3 (1 << 3) |
| # define DP_CEC_LOGICAL_ADDRESS_4 (1 << 4) |
| # define DP_CEC_LOGICAL_ADDRESS_5 (1 << 5) |
| # define DP_CEC_LOGICAL_ADDRESS_6 (1 << 6) |
| # define DP_CEC_LOGICAL_ADDRESS_7 (1 << 7) |
| #define DP_CEC_LOGICAL_ADDRESS_MASK_2 0x300F /* 0x300E word */ |
| # define DP_CEC_LOGICAL_ADDRESS_8 (1 << 0) |
| # define DP_CEC_LOGICAL_ADDRESS_9 (1 << 1) |
| # define DP_CEC_LOGICAL_ADDRESS_10 (1 << 2) |
| # define DP_CEC_LOGICAL_ADDRESS_11 (1 << 3) |
| # define DP_CEC_LOGICAL_ADDRESS_12 (1 << 4) |
| # define DP_CEC_LOGICAL_ADDRESS_13 (1 << 5) |
| # define DP_CEC_LOGICAL_ADDRESS_14 (1 << 6) |
| # define DP_CEC_LOGICAL_ADDRESS_15 (1 << 7) |
| |
| #define DP_CEC_RX_MESSAGE_BUFFER 0x3010 |
| #define DP_CEC_TX_MESSAGE_BUFFER 0x3020 |
| #define DP_CEC_MESSAGE_BUFFER_LENGTH 0x10 |
| |
| #define DP_AUX_HDCP_BKSV 0x68000 |
| #define DP_AUX_HDCP_RI_PRIME 0x68005 |
| #define DP_AUX_HDCP_AKSV 0x68007 |
| #define DP_AUX_HDCP_AN 0x6800C |
| #define DP_AUX_HDCP_V_PRIME(h) (0x68014 + h * 4) |
| #define DP_AUX_HDCP_BCAPS 0x68028 |
| # define DP_BCAPS_REPEATER_PRESENT BIT(1) |
| # define DP_BCAPS_HDCP_CAPABLE BIT(0) |
| #define DP_AUX_HDCP_BSTATUS 0x68029 |
| # define DP_BSTATUS_REAUTH_REQ BIT(3) |
| # define DP_BSTATUS_LINK_FAILURE BIT(2) |
| # define DP_BSTATUS_R0_PRIME_READY BIT(1) |
| # define DP_BSTATUS_READY BIT(0) |
| #define DP_AUX_HDCP_BINFO 0x6802A |
| #define DP_AUX_HDCP_KSV_FIFO 0x6802C |
| #define DP_AUX_HDCP_AINFO 0x6803B |
| |
| /* DP HDCP2.2 parameter offsets in DPCD address space */ |
| #define DP_HDCP_2_2_REG_RTX_OFFSET 0x69000 |
| #define DP_HDCP_2_2_REG_TXCAPS_OFFSET 0x69008 |
| #define DP_HDCP_2_2_REG_CERT_RX_OFFSET 0x6900B |
| #define DP_HDCP_2_2_REG_RRX_OFFSET 0x69215 |
| #define DP_HDCP_2_2_REG_RX_CAPS_OFFSET 0x6921D |
| #define DP_HDCP_2_2_REG_EKPUB_KM_OFFSET 0x69220 |
| #define DP_HDCP_2_2_REG_EKH_KM_WR_OFFSET 0x692A0 |
| #define DP_HDCP_2_2_REG_M_OFFSET 0x692B0 |
| #define DP_HDCP_2_2_REG_HPRIME_OFFSET 0x692C0 |
| #define DP_HDCP_2_2_REG_EKH_KM_RD_OFFSET 0x692E0 |
| #define DP_HDCP_2_2_REG_RN_OFFSET 0x692F0 |
| #define DP_HDCP_2_2_REG_LPRIME_OFFSET 0x692F8 |
| #define DP_HDCP_2_2_REG_EDKEY_KS_OFFSET 0x69318 |
| #define DP_HDCP_2_2_REG_RIV_OFFSET 0x69328 |
| #define DP_HDCP_2_2_REG_RXINFO_OFFSET 0x69330 |
| #define DP_HDCP_2_2_REG_SEQ_NUM_V_OFFSET 0x69332 |
| #define DP_HDCP_2_2_REG_VPRIME_OFFSET 0x69335 |
| #define DP_HDCP_2_2_REG_RECV_ID_LIST_OFFSET 0x69345 |
| #define DP_HDCP_2_2_REG_V_OFFSET 0x693E0 |
| #define DP_HDCP_2_2_REG_SEQ_NUM_M_OFFSET 0x693F0 |
| #define DP_HDCP_2_2_REG_K_OFFSET 0x693F3 |
| #define DP_HDCP_2_2_REG_STREAM_ID_TYPE_OFFSET 0x693F5 |
| #define DP_HDCP_2_2_REG_MPRIME_OFFSET 0x69473 |
| #define DP_HDCP_2_2_REG_RXSTATUS_OFFSET 0x69493 |
| #define DP_HDCP_2_2_REG_STREAM_TYPE_OFFSET 0x69494 |
| #define DP_HDCP_2_2_REG_DBG_OFFSET 0x69518 |
| |
| /* Link Training (LT)-tunable PHY Repeaters */ |
| #define DP_LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV 0xf0000 /* 1.3 */ |
| #define DP_MAX_LINK_RATE_PHY_REPEATER 0xf0001 /* 1.4a */ |
| #define DP_PHY_REPEATER_CNT 0xf0002 /* 1.3 */ |
| #define DP_PHY_REPEATER_MODE 0xf0003 /* 1.3 */ |
| #define DP_MAX_LANE_COUNT_PHY_REPEATER 0xf0004 /* 1.4a */ |
| #define DP_Repeater_FEC_CAPABILITY 0xf0004 /* 1.4 */ |
| #define DP_PHY_REPEATER_EXTENDED_WAIT_TIMEOUT 0xf0005 /* 1.4a */ |
| #define DP_TRAINING_PATTERN_SET_PHY_REPEATER1 0xf0010 /* 1.3 */ |
| #define DP_TRAINING_LANE0_SET_PHY_REPEATER1 0xf0011 /* 1.3 */ |
| #define DP_TRAINING_LANE1_SET_PHY_REPEATER1 0xf0012 /* 1.3 */ |
| #define DP_TRAINING_LANE2_SET_PHY_REPEATER1 0xf0013 /* 1.3 */ |
| #define DP_TRAINING_LANE3_SET_PHY_REPEATER1 0xf0014 /* 1.3 */ |
| #define DP_TRAINING_AUX_RD_INTERVAL_PHY_REPEATER1 0xf0020 /* 1.4a */ |
| #define DP_TRANSMITTER_CAPABILITY_PHY_REPEATER1 0xf0021 /* 1.4a */ |
| #define DP_LANE0_1_STATUS_PHY_REPEATER1 0xf0030 /* 1.3 */ |
| #define DP_LANE2_3_STATUS_PHY_REPEATER1 0xf0031 /* 1.3 */ |
| #define DP_LANE_ALIGN_STATUS_UPDATED_PHY_REPEATER1 0xf0032 /* 1.3 */ |
| #define DP_ADJUST_REQUEST_LANE0_1_PHY_REPEATER1 0xf0033 /* 1.3 */ |
| #define DP_ADJUST_REQUEST_LANE2_3_PHY_REPEATER1 0xf0034 /* 1.3 */ |
| #define DP_SYMBOL_ERROR_COUNT_LANE0_PHY_REPEATER1 0xf0035 /* 1.3 */ |
| #define DP_SYMBOL_ERROR_COUNT_LANE1_PHY_REPEATER1 0xf0037 /* 1.3 */ |
| #define DP_SYMBOL_ERROR_COUNT_LANE2_PHY_REPEATER1 0xf0039 /* 1.3 */ |
| #define DP_SYMBOL_ERROR_COUNT_LANE3_PHY_REPEATER1 0xf003b /* 1.3 */ |
| #define DP_FEC_STATUS_PHY_REPEATER1 0xf0290 /* 1.4 */ |
| #define DP_FEC_ERROR_COUNT_PHY_REPEATER1 0xf0291 /* 1.4 */ |
| #define DP_FEC_CAPABILITY_PHY_REPEATER1 0xf0294 /* 1.4a */ |
| |
| /* Repeater modes */ |
| #define DP_PHY_REPEATER_MODE_TRANSPARENT 0x55 /* 1.3 */ |
| #define DP_PHY_REPEATER_MODE_NON_TRANSPARENT 0xaa /* 1.3 */ |
| |
| /* DP HDCP message start offsets in DPCD address space */ |
| #define DP_HDCP_2_2_AKE_INIT_OFFSET DP_HDCP_2_2_REG_RTX_OFFSET |
| #define DP_HDCP_2_2_AKE_SEND_CERT_OFFSET DP_HDCP_2_2_REG_CERT_RX_OFFSET |
| #define DP_HDCP_2_2_AKE_NO_STORED_KM_OFFSET DP_HDCP_2_2_REG_EKPUB_KM_OFFSET |
| #define DP_HDCP_2_2_AKE_STORED_KM_OFFSET DP_HDCP_2_2_REG_EKH_KM_WR_OFFSET |
| #define DP_HDCP_2_2_AKE_SEND_HPRIME_OFFSET DP_HDCP_2_2_REG_HPRIME_OFFSET |
| #define DP_HDCP_2_2_AKE_SEND_PAIRING_INFO_OFFSET \ |
| DP_HDCP_2_2_REG_EKH_KM_RD_OFFSET |
| #define DP_HDCP_2_2_LC_INIT_OFFSET DP_HDCP_2_2_REG_RN_OFFSET |
| #define DP_HDCP_2_2_LC_SEND_LPRIME_OFFSET DP_HDCP_2_2_REG_LPRIME_OFFSET |
| #define DP_HDCP_2_2_SKE_SEND_EKS_OFFSET DP_HDCP_2_2_REG_EDKEY_KS_OFFSET |
| #define DP_HDCP_2_2_REP_SEND_RECVID_LIST_OFFSET DP_HDCP_2_2_REG_RXINFO_OFFSET |
| #define DP_HDCP_2_2_REP_SEND_ACK_OFFSET DP_HDCP_2_2_REG_V_OFFSET |
| #define DP_HDCP_2_2_REP_STREAM_MANAGE_OFFSET DP_HDCP_2_2_REG_SEQ_NUM_M_OFFSET |
| #define DP_HDCP_2_2_REP_STREAM_READY_OFFSET DP_HDCP_2_2_REG_MPRIME_OFFSET |
| |
| #define HDCP_2_2_DP_RXSTATUS_LEN 1 |
| #define HDCP_2_2_DP_RXSTATUS_READY(x) ((x) & BIT(0)) |
| #define HDCP_2_2_DP_RXSTATUS_H_PRIME(x) ((x) & BIT(1)) |
| #define HDCP_2_2_DP_RXSTATUS_PAIRING(x) ((x) & BIT(2)) |
| #define HDCP_2_2_DP_RXSTATUS_REAUTH_REQ(x) ((x) & BIT(3)) |
| #define HDCP_2_2_DP_RXSTATUS_LINK_FAILED(x) ((x) & BIT(4)) |
| |
| /* DP 1.2 Sideband message defines */ |
| /* peer device type - DP 1.2a Table 2-92 */ |
| #define DP_PEER_DEVICE_NONE 0x0 |
| #define DP_PEER_DEVICE_SOURCE_OR_SST 0x1 |
| #define DP_PEER_DEVICE_MST_BRANCHING 0x2 |
| #define DP_PEER_DEVICE_SST_SINK 0x3 |
| #define DP_PEER_DEVICE_DP_LEGACY_CONV 0x4 |
| |
| /* DP 1.2 MST sideband request names DP 1.2a Table 2-80 */ |
| #define DP_GET_MSG_TRANSACTION_VERSION 0x00 /* DP 1.3 */ |
| #define DP_LINK_ADDRESS 0x01 |
| #define DP_CONNECTION_STATUS_NOTIFY 0x02 |
| #define DP_ENUM_PATH_RESOURCES 0x10 |
| #define DP_ALLOCATE_PAYLOAD 0x11 |
| #define DP_QUERY_PAYLOAD 0x12 |
| #define DP_RESOURCE_STATUS_NOTIFY 0x13 |
| #define DP_CLEAR_PAYLOAD_ID_TABLE 0x14 |
| #define DP_REMOTE_DPCD_READ 0x20 |
| #define DP_REMOTE_DPCD_WRITE 0x21 |
| #define DP_REMOTE_I2C_READ 0x22 |
| #define DP_REMOTE_I2C_WRITE 0x23 |
| #define DP_POWER_UP_PHY 0x24 |
| #define DP_POWER_DOWN_PHY 0x25 |
| #define DP_SINK_EVENT_NOTIFY 0x30 |
| #define DP_QUERY_STREAM_ENC_STATUS 0x38 |
| |
| /* DP 1.2 MST sideband reply types */ |
| #define DP_SIDEBAND_REPLY_ACK 0x00 |
| #define DP_SIDEBAND_REPLY_NAK 0x01 |
| |
| /* DP 1.2 MST sideband nak reasons - table 2.84 */ |
| #define DP_NAK_WRITE_FAILURE 0x01 |
| #define DP_NAK_INVALID_READ 0x02 |
| #define DP_NAK_CRC_FAILURE 0x03 |
| #define DP_NAK_BAD_PARAM 0x04 |
| #define DP_NAK_DEFER 0x05 |
| #define DP_NAK_LINK_FAILURE 0x06 |
| #define DP_NAK_NO_RESOURCES 0x07 |
| #define DP_NAK_DPCD_FAIL 0x08 |
| #define DP_NAK_I2C_NAK 0x09 |
| #define DP_NAK_ALLOCATE_FAIL 0x0a |
| |
| #define MODE_I2C_START 1 |
| #define MODE_I2C_WRITE 2 |
| #define MODE_I2C_READ 4 |
| #define MODE_I2C_STOP 8 |
| |
| /* DP 1.2 MST PORTs - Section 2.5.1 v1.2a spec */ |
| #define DP_MST_PHYSICAL_PORT_0 0 |
| #define DP_MST_LOGICAL_PORT_0 8 |
| |
| #define DP_LINK_STATUS_SIZE 6 |
| bool drm_dp_channel_eq_ok(const u8 link_status[DP_LINK_STATUS_SIZE], |
| int lane_count); |
| bool drm_dp_clock_recovery_ok(const u8 link_status[DP_LINK_STATUS_SIZE], |
| int lane_count); |
| u8 drm_dp_get_adjust_request_voltage(const u8 link_status[DP_LINK_STATUS_SIZE], |
| int lane); |
| u8 drm_dp_get_adjust_request_pre_emphasis(const u8 link_status[DP_LINK_STATUS_SIZE], |
| int lane); |
| u8 drm_dp_get_adjust_request_post_cursor(const u8 link_status[DP_LINK_STATUS_SIZE], |
| unsigned int lane); |
| |
| #define DP_BRANCH_OUI_HEADER_SIZE 0xc |
| #define DP_RECEIVER_CAP_SIZE 0xf |
| #define DP_DSC_RECEIVER_CAP_SIZE 0xf |
| #define EDP_PSR_RECEIVER_CAP_SIZE 2 |
| #define EDP_DISPLAY_CTL_CAP_SIZE 3 |
| |
| void drm_dp_link_train_clock_recovery_delay(const u8 dpcd[DP_RECEIVER_CAP_SIZE]); |
| void drm_dp_link_train_channel_eq_delay(const u8 dpcd[DP_RECEIVER_CAP_SIZE]); |
| |
| u8 drm_dp_link_rate_to_bw_code(int link_rate); |
| int drm_dp_bw_code_to_link_rate(u8 link_bw); |
| |
| #define DP_SDP_AUDIO_TIMESTAMP 0x01 |
| #define DP_SDP_AUDIO_STREAM 0x02 |
| #define DP_SDP_EXTENSION 0x04 /* DP 1.1 */ |
| #define DP_SDP_AUDIO_COPYMANAGEMENT 0x05 /* DP 1.2 */ |
| #define DP_SDP_ISRC 0x06 /* DP 1.2 */ |
| #define DP_SDP_VSC 0x07 /* DP 1.2 */ |
| #define DP_SDP_CAMERA_GENERIC(i) (0x08 + (i)) /* 0-7, DP 1.3 */ |
| #define DP_SDP_PPS 0x10 /* DP 1.4 */ |
| #define DP_SDP_VSC_EXT_VESA 0x20 /* DP 1.4 */ |
| #define DP_SDP_VSC_EXT_CEA 0x21 /* DP 1.4 */ |
| /* 0x80+ CEA-861 infoframe types */ |
| |
| /** |
| * struct dp_sdp_header - DP secondary data packet header |
| * @HB0: Secondary Data Packet ID |
| * @HB1: Secondary Data Packet Type |
| * @HB2: Secondary Data Packet Specific header, Byte 0 |
| * @HB3: Secondary Data packet Specific header, Byte 1 |
| */ |
| struct dp_sdp_header { |
| u8 HB0; |
| u8 HB1; |
| u8 HB2; |
| u8 HB3; |
| } __packed; |
| |
| #define EDP_SDP_HEADER_REVISION_MASK 0x1F |
| #define EDP_SDP_HEADER_VALID_PAYLOAD_BYTES 0x1F |
| #define DP_SDP_PPS_HEADER_PAYLOAD_BYTES_MINUS_1 0x7F |
| |
| /** |
| * struct dp_sdp - DP secondary data packet |
| * @sdp_header: DP secondary data packet header |
| * @db: DP secondaray data packet data blocks |
| * VSC SDP Payload for PSR |
| * db[0]: Stereo Interface |
| * db[1]: 0 - PSR State; 1 - Update RFB; 2 - CRC Valid |
| * db[2]: CRC value bits 7:0 of the R or Cr component |
| * db[3]: CRC value bits 15:8 of the R or Cr component |
| * db[4]: CRC value bits 7:0 of the G or Y component |
| * db[5]: CRC value bits 15:8 of the G or Y component |
| * db[6]: CRC value bits 7:0 of the B or Cb component |
| * db[7]: CRC value bits 15:8 of the B or Cb component |
| * db[8] - db[31]: Reserved |
| * VSC SDP Payload for Pixel Encoding/Colorimetry Format |
| * db[0] - db[15]: Reserved |
| * db[16]: Pixel Encoding and Colorimetry Formats |
| * db[17]: Dynamic Range and Component Bit Depth |
| * db[18]: Content Type |
| * db[19] - db[31]: Reserved |
| */ |
| struct dp_sdp { |
| struct dp_sdp_header sdp_header; |
| u8 db[32]; |
| } __packed; |
| |
| #define EDP_VSC_PSR_STATE_ACTIVE (1<<0) |
| #define EDP_VSC_PSR_UPDATE_RFB (1<<1) |
| #define EDP_VSC_PSR_CRC_VALUES_VALID (1<<2) |
| |
| /** |
| * enum dp_pixelformat - drm DP Pixel encoding formats |
| * |
| * This enum is used to indicate DP VSC SDP Pixel encoding formats. |
| * It is based on DP 1.4 spec [Table 2-117: VSC SDP Payload for DB16 through |
| * DB18] |
| * |
| * @DP_PIXELFORMAT_RGB: RGB pixel encoding format |
| * @DP_PIXELFORMAT_YUV444: YCbCr 4:4:4 pixel encoding format |
| * @DP_PIXELFORMAT_YUV422: YCbCr 4:2:2 pixel encoding format |
| * @DP_PIXELFORMAT_YUV420: YCbCr 4:2:0 pixel encoding format |
| * @DP_PIXELFORMAT_Y_ONLY: Y Only pixel encoding format |
| * @DP_PIXELFORMAT_RAW: RAW pixel encoding format |
| * @DP_PIXELFORMAT_RESERVED: Reserved pixel encoding format |
| */ |
| enum dp_pixelformat { |
| DP_PIXELFORMAT_RGB = 0, |
| DP_PIXELFORMAT_YUV444 = 0x1, |
| DP_PIXELFORMAT_YUV422 = 0x2, |
| DP_PIXELFORMAT_YUV420 = 0x3, |
| DP_PIXELFORMAT_Y_ONLY = 0x4, |
| DP_PIXELFORMAT_RAW = 0x5, |
| DP_PIXELFORMAT_RESERVED = 0x6, |
| }; |
| |
| /** |
| * enum dp_colorimetry - drm DP Colorimetry formats |
| * |
| * This enum is used to indicate DP VSC SDP Colorimetry formats. |
| * It is based on DP 1.4 spec [Table 2-117: VSC SDP Payload for DB16 through |
| * DB18] and a name of enum member follows DRM_MODE_COLORIMETRY definition. |
| * |
| * @DP_COLORIMETRY_DEFAULT: sRGB (IEC 61966-2-1) or |
| * ITU-R BT.601 colorimetry format |
| * @DP_COLORIMETRY_RGB_WIDE_FIXED: RGB wide gamut fixed point colorimetry format |
| * @DP_COLORIMETRY_BT709_YCC: ITU-R BT.709 colorimetry format |
| * @DP_COLORIMETRY_RGB_WIDE_FLOAT: RGB wide gamut floating point |
| * (scRGB (IEC 61966-2-2)) colorimetry format |
| * @DP_COLORIMETRY_XVYCC_601: xvYCC601 colorimetry format |
| * @DP_COLORIMETRY_OPRGB: OpRGB colorimetry format |
| * @DP_COLORIMETRY_XVYCC_709: xvYCC709 colorimetry format |
| * @DP_COLORIMETRY_DCI_P3_RGB: DCI-P3 (SMPTE RP 431-2) colorimetry format |
| * @DP_COLORIMETRY_SYCC_601: sYCC601 colorimetry format |
| * @DP_COLORIMETRY_RGB_CUSTOM: RGB Custom Color Profile colorimetry format |
| * @DP_COLORIMETRY_OPYCC_601: opYCC601 colorimetry format |
| * @DP_COLORIMETRY_BT2020_RGB: ITU-R BT.2020 R' G' B' colorimetry format |
| * @DP_COLORIMETRY_BT2020_CYCC: ITU-R BT.2020 Y'c C'bc C'rc colorimetry format |
| * @DP_COLORIMETRY_BT2020_YCC: ITU-R BT.2020 Y' C'b C'r colorimetry format |
| */ |
| enum dp_colorimetry { |
| DP_COLORIMETRY_DEFAULT = 0, |
| DP_COLORIMETRY_RGB_WIDE_FIXED = 0x1, |
| DP_COLORIMETRY_BT709_YCC = 0x1, |
| DP_COLORIMETRY_RGB_WIDE_FLOAT = 0x2, |
| DP_COLORIMETRY_XVYCC_601 = 0x2, |
| DP_COLORIMETRY_OPRGB = 0x3, |
| DP_COLORIMETRY_XVYCC_709 = 0x3, |
| DP_COLORIMETRY_DCI_P3_RGB = 0x4, |
| DP_COLORIMETRY_SYCC_601 = 0x4, |
| DP_COLORIMETRY_RGB_CUSTOM = 0x5, |
| DP_COLORIMETRY_OPYCC_601 = 0x5, |
| DP_COLORIMETRY_BT2020_RGB = 0x6, |
| DP_COLORIMETRY_BT2020_CYCC = 0x6, |
| DP_COLORIMETRY_BT2020_YCC = 0x7, |
| }; |
| |
| /** |
| * enum dp_dynamic_range - drm DP Dynamic Range |
| * |
| * This enum is used to indicate DP VSC SDP Dynamic Range. |
| * It is based on DP 1.4 spec [Table 2-117: VSC SDP Payload for DB16 through |
| * DB18] |
| * |
| * @DP_DYNAMIC_RANGE_VESA: VESA range |
| * @DP_DYNAMIC_RANGE_CTA: CTA range |
| */ |
| enum dp_dynamic_range { |
| DP_DYNAMIC_RANGE_VESA = 0, |
| DP_DYNAMIC_RANGE_CTA = 1, |
| }; |
| |
| /** |
| * enum dp_content_type - drm DP Content Type |
| * |
| * This enum is used to indicate DP VSC SDP Content Types. |
| * It is based on DP 1.4 spec [Table 2-117: VSC SDP Payload for DB16 through |
| * DB18] |
| * CTA-861-G defines content types and expected processing by a sink device |
| * |
| * @DP_CONTENT_TYPE_NOT_DEFINED: Not defined type |
| * @DP_CONTENT_TYPE_GRAPHICS: Graphics type |
| * @DP_CONTENT_TYPE_PHOTO: Photo type |
| * @DP_CONTENT_TYPE_VIDEO: Video type |
| * @DP_CONTENT_TYPE_GAME: Game type |
| */ |
| enum dp_content_type { |
| DP_CONTENT_TYPE_NOT_DEFINED = 0x00, |
| DP_CONTENT_TYPE_GRAPHICS = 0x01, |
| DP_CONTENT_TYPE_PHOTO = 0x02, |
| DP_CONTENT_TYPE_VIDEO = 0x03, |
| DP_CONTENT_TYPE_GAME = 0x04, |
| }; |
| |
| /** |
| * struct drm_dp_vsc_sdp - drm DP VSC SDP |
| * |
| * This structure represents a DP VSC SDP of drm |
| * It is based on DP 1.4 spec [Table 2-116: VSC SDP Header Bytes] and |
| * [Table 2-117: VSC SDP Payload for DB16 through DB18] |
| * |
| * @sdp_type: secondary-data packet type |
| * @revision: revision number |
| * @length: number of valid data bytes |
| * @pixelformat: pixel encoding format |
| * @colorimetry: colorimetry format |
| * @bpc: bit per color |
| * @dynamic_range: dynamic range information |
| * @content_type: CTA-861-G defines content types and expected processing by a sink device |
| */ |
| struct drm_dp_vsc_sdp { |
| unsigned char sdp_type; |
| unsigned char revision; |
| unsigned char length; |
| enum dp_pixelformat pixelformat; |
| enum dp_colorimetry colorimetry; |
| int bpc; |
| enum dp_dynamic_range dynamic_range; |
| enum dp_content_type content_type; |
| }; |
| |
| void drm_dp_vsc_sdp_log(const char *level, struct device *dev, |
| const struct drm_dp_vsc_sdp *vsc); |
| |
| int drm_dp_psr_setup_time(const u8 psr_cap[EDP_PSR_RECEIVER_CAP_SIZE]); |
| |
| static inline int |
| drm_dp_max_link_rate(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) |
| { |
| return drm_dp_bw_code_to_link_rate(dpcd[DP_MAX_LINK_RATE]); |
| } |
| |
| static inline u8 |
| drm_dp_max_lane_count(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) |
| { |
| return dpcd[DP_MAX_LANE_COUNT] & DP_MAX_LANE_COUNT_MASK; |
| } |
| |
| static inline bool |
| drm_dp_enhanced_frame_cap(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) |
| { |
| return dpcd[DP_DPCD_REV] >= 0x11 && |
| (dpcd[DP_MAX_LANE_COUNT] & DP_ENHANCED_FRAME_CAP); |
| } |
| |
| static inline bool |
| drm_dp_fast_training_cap(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) |
| { |
| return dpcd[DP_DPCD_REV] >= 0x11 && |
| (dpcd[DP_MAX_DOWNSPREAD] & DP_NO_AUX_HANDSHAKE_LINK_TRAINING); |
| } |
| |
| static inline bool |
| drm_dp_tps3_supported(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) |
| { |
| return dpcd[DP_DPCD_REV] >= 0x12 && |
| dpcd[DP_MAX_LANE_COUNT] & DP_TPS3_SUPPORTED; |
| } |
| |
| static inline bool |
| drm_dp_tps4_supported(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) |
| { |
| return dpcd[DP_DPCD_REV] >= 0x14 && |
| dpcd[DP_MAX_DOWNSPREAD] & DP_TPS4_SUPPORTED; |
| } |
| |
| static inline u8 |
| drm_dp_training_pattern_mask(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) |
| { |
| return (dpcd[DP_DPCD_REV] >= 0x14) ? DP_TRAINING_PATTERN_MASK_1_4 : |
| DP_TRAINING_PATTERN_MASK; |
| } |
| |
| static inline bool |
| drm_dp_is_branch(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) |
| { |
| return dpcd[DP_DOWNSTREAMPORT_PRESENT] & DP_DWN_STRM_PORT_PRESENT; |
| } |
| |
| /* DP/eDP DSC support */ |
| u8 drm_dp_dsc_sink_max_slice_count(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE], |
| bool is_edp); |
| u8 drm_dp_dsc_sink_line_buf_depth(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE]); |
| int drm_dp_dsc_sink_supported_input_bpcs(const u8 dsc_dpc[DP_DSC_RECEIVER_CAP_SIZE], |
| u8 dsc_bpc[3]); |
| |
| static inline bool |
| drm_dp_sink_supports_dsc(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE]) |
| { |
| return dsc_dpcd[DP_DSC_SUPPORT - DP_DSC_SUPPORT] & |
| DP_DSC_DECOMPRESSION_IS_SUPPORTED; |
| } |
| |
| static inline u16 |
| drm_edp_dsc_sink_output_bpp(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE]) |
| { |
| return dsc_dpcd[DP_DSC_MAX_BITS_PER_PIXEL_LOW - DP_DSC_SUPPORT] | |
| (dsc_dpcd[DP_DSC_MAX_BITS_PER_PIXEL_HI - DP_DSC_SUPPORT] & |
| DP_DSC_MAX_BITS_PER_PIXEL_HI_MASK << |
| DP_DSC_MAX_BITS_PER_PIXEL_HI_SHIFT); |
| } |
| |
| static inline u32 |
| drm_dp_dsc_sink_max_slice_width(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE]) |
| { |
| /* Max Slicewidth = Number of Pixels * 320 */ |
| return dsc_dpcd[DP_DSC_MAX_SLICE_WIDTH - DP_DSC_SUPPORT] * |
| DP_DSC_SLICE_WIDTH_MULTIPLIER; |
| } |
| |
| /* Forward Error Correction Support on DP 1.4 */ |
| static inline bool |
| drm_dp_sink_supports_fec(const u8 fec_capable) |
| { |
| return fec_capable & DP_FEC_CAPABLE; |
| } |
| |
| static inline bool |
| drm_dp_channel_coding_supported(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) |
| { |
| return dpcd[DP_MAIN_LINK_CHANNEL_CODING] & DP_CAP_ANSI_8B10B; |
| } |
| |
| static inline bool |
| drm_dp_alternate_scrambler_reset_cap(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) |
| { |
| return dpcd[DP_EDP_CONFIGURATION_CAP] & |
| DP_ALTERNATE_SCRAMBLER_RESET_CAP; |
| } |
| |
| /* Ignore MSA timing for Adaptive Sync support on DP 1.4 */ |
| static inline bool |
| drm_dp_sink_can_do_video_without_timing_msa(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) |
| { |
| return dpcd[DP_DOWN_STREAM_PORT_COUNT] & |
| DP_MSA_TIMING_PAR_IGNORED; |
| } |
| |
| /* |
| * DisplayPort AUX channel |
| */ |
| |
| /** |
| * struct drm_dp_aux_msg - DisplayPort AUX channel transaction |
| * @address: address of the (first) register to access |
| * @request: contains the type of transaction (see DP_AUX_* macros) |
| * @reply: upon completion, contains the reply type of the transaction |
| * @buffer: pointer to a transmission or reception buffer |
| * @size: size of @buffer |
| */ |
| struct drm_dp_aux_msg { |
| unsigned int address; |
| u8 request; |
| u8 reply; |
| void *buffer; |
| size_t size; |
| }; |
| |
| struct cec_adapter; |
| struct edid; |
| struct drm_connector; |
| |
| /** |
| * struct drm_dp_aux_cec - DisplayPort CEC-Tunneling-over-AUX |
| * @lock: mutex protecting this struct |
| * @adap: the CEC adapter for CEC-Tunneling-over-AUX support. |
| * @connector: the connector this CEC adapter is associated with |
| * @unregister_work: unregister the CEC adapter |
| */ |
| struct drm_dp_aux_cec { |
| struct mutex lock; |
| struct cec_adapter *adap; |
| struct drm_connector *connector; |
| struct delayed_work unregister_work; |
| }; |
| |
| /** |
| * struct drm_dp_aux - DisplayPort AUX channel |
| * @name: user-visible name of this AUX channel and the I2C-over-AUX adapter |
| * @ddc: I2C adapter that can be used for I2C-over-AUX communication |
| * @dev: pointer to struct device that is the parent for this AUX channel |
| * @crtc: backpointer to the crtc that is currently using this AUX channel |
| * @hw_mutex: internal mutex used for locking transfers |
| * @crc_work: worker that captures CRCs for each frame |
| * @crc_count: counter of captured frame CRCs |
| * @transfer: transfers a message representing a single AUX transaction |
| * |
| * The .dev field should be set to a pointer to the device that implements |
| * the AUX channel. |
| * |
| * The .name field may be used to specify the name of the I2C adapter. If set to |
| * NULL, dev_name() of .dev will be used. |
| * |
| * Drivers provide a hardware-specific implementation of how transactions |
| * are executed via the .transfer() function. A pointer to a drm_dp_aux_msg |
| * structure describing the transaction is passed into this function. Upon |
| * success, the implementation should return the number of payload bytes |
| * that were transferred, or a negative error-code on failure. Helpers |
| * propagate errors from the .transfer() function, with the exception of |
| * the -EBUSY error, which causes a transaction to be retried. On a short, |
| * helpers will return -EPROTO to make it simpler to check for failure. |
| * |
| * An AUX channel can also be used to transport I2C messages to a sink. A |
| * typical application of that is to access an EDID that's present in the |
| * sink device. The .transfer() function can also be used to execute such |
| * transactions. The drm_dp_aux_register() function registers an I2C |
| * adapter that can be passed to drm_probe_ddc(). Upon removal, drivers |
| * should call drm_dp_aux_unregister() to remove the I2C adapter. |
| * The I2C adapter uses long transfers by default; if a partial response is |
| * received, the adapter will drop down to the size given by the partial |
| * response for this transaction only. |
| * |
| * Note that the aux helper code assumes that the .transfer() function |
| * only modifies the reply field of the drm_dp_aux_msg structure. The |
| * retry logic and i2c helpers assume this is the case. |
| */ |
| struct drm_dp_aux { |
| const char *name; |
| struct i2c_adapter ddc; |
| struct device *dev; |
| struct drm_crtc *crtc; |
| struct mutex hw_mutex; |
| struct work_struct crc_work; |
| u8 crc_count; |
| ssize_t (*transfer)(struct drm_dp_aux *aux, |
| struct drm_dp_aux_msg *msg); |
| /** |
| * @i2c_nack_count: Counts I2C NACKs, used for DP validation. |
| */ |
| unsigned i2c_nack_count; |
| /** |
| * @i2c_defer_count: Counts I2C DEFERs, used for DP validation. |
| */ |
| unsigned i2c_defer_count; |
| /** |
| * @cec: struct containing fields used for CEC-Tunneling-over-AUX. |
| */ |
| struct drm_dp_aux_cec cec; |
| /** |
| * @is_remote: Is this AUX CH actually using sideband messaging. |
| */ |
| bool is_remote; |
| }; |
| |
| ssize_t drm_dp_dpcd_read(struct drm_dp_aux *aux, unsigned int offset, |
| void *buffer, size_t size); |
| ssize_t drm_dp_dpcd_write(struct drm_dp_aux *aux, unsigned int offset, |
| void *buffer, size_t size); |
| |
| /** |
| * drm_dp_dpcd_readb() - read a single byte from the DPCD |
| * @aux: DisplayPort AUX channel |
| * @offset: address of the register to read |
| * @valuep: location where the value of the register will be stored |
| * |
| * Returns the number of bytes transferred (1) on success, or a negative |
| * error code on failure. |
| */ |
| static inline ssize_t drm_dp_dpcd_readb(struct drm_dp_aux *aux, |
| unsigned int offset, u8 *valuep) |
| { |
| return drm_dp_dpcd_read(aux, offset, valuep, 1); |
| } |
| |
| /** |
| * drm_dp_dpcd_writeb() - write a single byte to the DPCD |
| * @aux: DisplayPort AUX channel |
| * @offset: address of the register to write |
| * @value: value to write to the register |
| * |
| * Returns the number of bytes transferred (1) on success, or a negative |
| * error code on failure. |
| */ |
| static inline ssize_t drm_dp_dpcd_writeb(struct drm_dp_aux *aux, |
| unsigned int offset, u8 value) |
| { |
| return drm_dp_dpcd_write(aux, offset, &value, 1); |
| } |
| |
| int drm_dp_dpcd_read_link_status(struct drm_dp_aux *aux, |
| u8 status[DP_LINK_STATUS_SIZE]); |
| |
| bool drm_dp_send_real_edid_checksum(struct drm_dp_aux *aux, |
| u8 real_edid_checksum); |
| |
| int drm_dp_downstream_max_clock(const u8 dpcd[DP_RECEIVER_CAP_SIZE], |
| const u8 port_cap[4]); |
| int drm_dp_downstream_max_bpc(const u8 dpcd[DP_RECEIVER_CAP_SIZE], |
| const u8 port_cap[4]); |
| int drm_dp_downstream_id(struct drm_dp_aux *aux, char id[6]); |
| void drm_dp_downstream_debug(struct seq_file *m, const u8 dpcd[DP_RECEIVER_CAP_SIZE], |
| const u8 port_cap[4], struct drm_dp_aux *aux); |
| |
| void drm_dp_remote_aux_init(struct drm_dp_aux *aux); |
| void drm_dp_aux_init(struct drm_dp_aux *aux); |
| int drm_dp_aux_register(struct drm_dp_aux *aux); |
| void drm_dp_aux_unregister(struct drm_dp_aux *aux); |
| |
| int drm_dp_start_crc(struct drm_dp_aux *aux, struct drm_crtc *crtc); |
| int drm_dp_stop_crc(struct drm_dp_aux *aux); |
| |
| struct drm_dp_dpcd_ident { |
| u8 oui[3]; |
| u8 device_id[6]; |
| u8 hw_rev; |
| u8 sw_major_rev; |
| u8 sw_minor_rev; |
| } __packed; |
| |
| /** |
| * struct drm_dp_desc - DP branch/sink device descriptor |
| * @ident: DP device identification from DPCD 0x400 (sink) or 0x500 (branch). |
| * @quirks: Quirks; use drm_dp_has_quirk() to query for the quirks. |
| */ |
| struct drm_dp_desc { |
| struct drm_dp_dpcd_ident ident; |
| u32 quirks; |
| }; |
| |
| int drm_dp_read_desc(struct drm_dp_aux *aux, struct drm_dp_desc *desc, |
| bool is_branch); |
| u32 drm_dp_get_edid_quirks(const struct edid *edid); |
| |
| /** |
| * enum drm_dp_quirk - Display Port sink/branch device specific quirks |
| * |
| * Display Port sink and branch devices in the wild have a variety of bugs, try |
| * to collect them here. The quirks are shared, but it's up to the drivers to |
| * implement workarounds for them. Note that because some devices have |
| * unreliable OUIDs, the EDID of sinks should also be checked for quirks using |
| * drm_dp_get_edid_quirks(). |
| */ |
| enum drm_dp_quirk { |
| /** |
| * @DP_DPCD_QUIRK_CONSTANT_N: |
| * |
| * The device requires main link attributes Mvid and Nvid to be limited |
| * to 16 bits. So will give a constant value (0x8000) for compatability. |
| */ |
| DP_DPCD_QUIRK_CONSTANT_N, |
| /** |
| * @DP_DPCD_QUIRK_NO_PSR: |
| * |
| * The device does not support PSR even if reports that it supports or |
| * driver still need to implement proper handling for such device. |
| */ |
| DP_DPCD_QUIRK_NO_PSR, |
| /** |
| * @DP_DPCD_QUIRK_NO_SINK_COUNT: |
| * |
| * The device does not set SINK_COUNT to a non-zero value. |
| * The driver should ignore SINK_COUNT during detection. |
| */ |
| DP_DPCD_QUIRK_NO_SINK_COUNT, |
| /** |
| * @DP_DPCD_QUIRK_DSC_WITHOUT_VIRTUAL_DPCD: |
| * |
| * The device supports MST DSC despite not supporting Virtual DPCD. |
| * The DSC caps can be read from the physical aux instead. |
| */ |
| DP_DPCD_QUIRK_DSC_WITHOUT_VIRTUAL_DPCD, |
| /** |
| * @DP_QUIRK_FORCE_DPCD_BACKLIGHT: |
| * |
| * The device is telling the truth when it says that it uses DPCD |
| * backlight controls, even if the system's firmware disagrees. This |
| * quirk should be checked against both the ident and panel EDID. |
| * When present, the driver should honor the DPCD backlight |
| * capabilities advertised. |
| */ |
| DP_QUIRK_FORCE_DPCD_BACKLIGHT, |
| /** |
| * @DP_DPCD_QUIRK_CAN_DO_MAX_LINK_RATE_3_24_GBPS: |
| * |
| * The device supports a link rate of 3.24 Gbps (multiplier 0xc) despite |
| * the DP_MAX_LINK_RATE register reporting a lower max multiplier. |
| */ |
| DP_DPCD_QUIRK_CAN_DO_MAX_LINK_RATE_3_24_GBPS, |
| }; |
| |
| /** |
| * drm_dp_has_quirk() - does the DP device have a specific quirk |
| * @desc: Device descriptor filled by drm_dp_read_desc() |
| * @edid_quirks: Optional quirk bitmask filled by drm_dp_get_edid_quirks() |
| * @quirk: Quirk to query for |
| * |
| * Return true if DP device identified by @desc has @quirk. |
| */ |
| static inline bool |
| drm_dp_has_quirk(const struct drm_dp_desc *desc, u32 edid_quirks, |
| enum drm_dp_quirk quirk) |
| { |
| return (desc->quirks | edid_quirks) & BIT(quirk); |
| } |
| |
| #ifdef CONFIG_DRM_DP_CEC |
| void drm_dp_cec_irq(struct drm_dp_aux *aux); |
| void drm_dp_cec_register_connector(struct drm_dp_aux *aux, |
| struct drm_connector *connector); |
| void drm_dp_cec_unregister_connector(struct drm_dp_aux *aux); |
| void drm_dp_cec_set_edid(struct drm_dp_aux *aux, const struct edid *edid); |
| void drm_dp_cec_unset_edid(struct drm_dp_aux *aux); |
| #else |
| static inline void drm_dp_cec_irq(struct drm_dp_aux *aux) |
| { |
| } |
| |
| static inline void |
| drm_dp_cec_register_connector(struct drm_dp_aux *aux, |
| struct drm_connector *connector) |
| { |
| } |
| |
| static inline void drm_dp_cec_unregister_connector(struct drm_dp_aux *aux) |
| { |
| } |
| |
| static inline void drm_dp_cec_set_edid(struct drm_dp_aux *aux, |
| const struct edid *edid) |
| { |
| } |
| |
| static inline void drm_dp_cec_unset_edid(struct drm_dp_aux *aux) |
| { |
| } |
| |
| #endif |
| |
| /** |
| * struct drm_dp_phy_test_params - DP Phy Compliance parameters |
| * @link_rate: Requested Link rate from DPCD 0x219 |
| * @num_lanes: Number of lanes requested by sing through DPCD 0x220 |
| * @phy_pattern: DP Phy test pattern from DPCD 0x248 |
| * @hb2_reset: DP HBR2_COMPLIANCE_SCRAMBLER_RESET from DCPD 0x24A and 0x24B |
| * @custom80: DP Test_80BIT_CUSTOM_PATTERN from DPCDs 0x250 through 0x259 |
| * @enhanced_frame_cap: flag for enhanced frame capability. |
| */ |
| struct drm_dp_phy_test_params { |
| int link_rate; |
| u8 num_lanes; |
| u8 phy_pattern; |
| u8 hbr2_reset[2]; |
| u8 custom80[10]; |
| bool enhanced_frame_cap; |
| }; |
| |
| int drm_dp_get_phy_test_pattern(struct drm_dp_aux *aux, |
| struct drm_dp_phy_test_params *data); |
| int drm_dp_set_phy_test_pattern(struct drm_dp_aux *aux, |
| struct drm_dp_phy_test_params *data, u8 dp_rev); |
| #endif /* _DRM_DP_HELPER_H_ */ |