blob: 280c62afae13963b46e6eae3ab8b1d2f4bb55583 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/media/i2c/ov5647.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Omnivision OV5647 raw image sensor
maintainers:
- Dave Stevenson <dave.stevenson@raspberrypi.com>
- Jacopo Mondi <jacopo@jmondi.org>
description: |-
The OV5647 is a raw image sensor with MIPI CSI-2 and CCP2 image data
interfaces and CCI (I2C compatible) control bus.
properties:
compatible:
const: ovti,ov5647
reg:
description: I2C device address.
maxItems: 1
clocks:
description: Reference to the xclk clock.
maxItems: 1
pwdn-gpios:
description: Reference to the GPIO connected to the pwdn pin. Active high.
maxItems: 1
port:
type: object
description: |-
Should contain one endpoint sub-node used to model connection to the
video receiver according to the specification defined in
Documentation/devicetree/bindings/media/video-interfaces.txt.
properties:
endpoint:
type: object
properties:
remote-endpoint:
description: |-
phandle to the video receiver input port.
clock-noncontinuous:
type: boolean
description: |-
Set to true to allow MIPI CSI-2 non-continuous clock operations.
additionalProperties: false
additionalProperties: false
required:
- compatible
- reg
- clocks
- port
additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
ov5647: camera@36 {
compatible = "ovti,ov5647";
reg = <0x36>;
clocks = <&camera_clk>;
pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
port {
camera_out: endpoint {
remote-endpoint = <&csi1_ep1>;
};
};
};
};
...