| /************************************************************************ |
| * |
| * This file is subject to the terms and conditions of the GNU Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Non-GPL License also available as part of VisualDSP++ |
| * http://www.analog.com/processors/resources/crosscore/visualDspDevSoftware.html |
| * |
| * (c) Copyright 2001-2005 Analog Devices, Inc. All rights reserved |
| * |
| * This file under source code control, please send bugs or changes to: |
| * dsptools.support@analog.com |
| * |
| ************************************************************************/ |
| /* |
| * File: include/asm-blackfin/mach-bf533/defBF532.h |
| * Based on: |
| * Author: |
| * |
| * Created: |
| * Description: |
| * |
| * Rev: |
| * |
| * Modified: |
| * |
| * Bugs: Enter bugs at http://blackfin.uclinux.org/ |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2, or (at your option) |
| * any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; see the file COPYING. |
| * If not, write to the Free Software Foundation, |
| * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| */ |
| /* SYSTEM & MM REGISTER BIT & ADDRESS DEFINITIONS FOR ADSP-BF532 */ |
| |
| #ifndef _DEF_BF532_H |
| #define _DEF_BF532_H |
| |
| /* include all Core registers and bit definitions */ |
| #include <asm/mach-common/def_LPBlackfin.h> |
| |
| /*********************************************************************************** */ |
| /* System MMR Register Map */ |
| /*********************************************************************************** */ |
| /* Clock and System Control (0xFFC00000 - 0xFFC000FF) */ |
| |
| #define PLL_CTL 0xFFC00000 /* PLL Control register (16-bit) */ |
| #define PLL_DIV 0xFFC00004 /* PLL Divide Register (16-bit) */ |
| #define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register (16-bit) */ |
| #define PLL_STAT 0xFFC0000C /* PLL Status register (16-bit) */ |
| #define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count register (16-bit) */ |
| #define CHIPID 0xFFC00014 /* Chip ID Register */ |
| |
| /* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */ |
| #define SWRST 0xFFC00100 /* Software Reset Register (16-bit) */ |
| #define SYSCR 0xFFC00104 /* System Configuration registe */ |
| #define SIC_RVECT 0xFFC00108 /* Interrupt Reset Vector Address Register */ |
| #define SIC_IMASK 0xFFC0010C /* Interrupt Mask Register */ |
| #define SIC_IAR0 0xFFC00110 /* Interrupt Assignment Register 0 */ |
| #define SIC_IAR1 0xFFC00114 /* Interrupt Assignment Register 1 */ |
| #define SIC_IAR2 0xFFC00118 /* Interrupt Assignment Register 2 */ |
| #define SIC_ISR 0xFFC00120 /* Interrupt Status Register */ |
| #define SIC_IWR 0xFFC00124 /* Interrupt Wakeup Register */ |
| |
| /* Watchdog Timer (0xFFC00200 - 0xFFC002FF) */ |
| #define WDOG_CTL 0xFFC00200 /* Watchdog Control Register */ |
| #define WDOG_CNT 0xFFC00204 /* Watchdog Count Register */ |
| #define WDOG_STAT 0xFFC00208 /* Watchdog Status Register */ |
| |
| /* Real Time Clock (0xFFC00300 - 0xFFC003FF) */ |
| #define RTC_STAT 0xFFC00300 /* RTC Status Register */ |
| #define RTC_ICTL 0xFFC00304 /* RTC Interrupt Control Register */ |
| #define RTC_ISTAT 0xFFC00308 /* RTC Interrupt Status Register */ |
| #define RTC_SWCNT 0xFFC0030C /* RTC Stopwatch Count Register */ |
| #define RTC_ALARM 0xFFC00310 /* RTC Alarm Time Register */ |
| #define RTC_FAST 0xFFC00314 /* RTC Prescaler Enable Register */ |
| #define RTC_PREN 0xFFC00314 /* RTC Prescaler Enable Register (alternate macro) */ |
| |
| /* UART Controller (0xFFC00400 - 0xFFC004FF) */ |
| |
| /* |
| * Because include/linux/serial_reg.h have defined UART_*, |
| * So we define blackfin uart regs to BFIN_UART_*. |
| */ |
| #define BFIN_UART_THR 0xFFC00400 /* Transmit Holding register */ |
| #define BFIN_UART_RBR 0xFFC00400 /* Receive Buffer register */ |
| #define BFIN_UART_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */ |
| #define BFIN_UART_IER 0xFFC00404 /* Interrupt Enable Register */ |
| #define BFIN_UART_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */ |
| #define BFIN_UART_IIR 0xFFC00408 /* Interrupt Identification Register */ |
| #define BFIN_UART_LCR 0xFFC0040C /* Line Control Register */ |
| #define BFIN_UART_MCR 0xFFC00410 /* Modem Control Register */ |
| #define BFIN_UART_LSR 0xFFC00414 /* Line Status Register */ |
| #if 0 |
| #define BFIN_UART_MSR 0xFFC00418 /* Modem Status Register (UNUSED in ADSP-BF532) */ |
| #endif |
| #define BFIN_UART_SCR 0xFFC0041C /* SCR Scratch Register */ |
| #define BFIN_UART_GCTL 0xFFC00424 /* Global Control Register */ |
| |
| /* SPI Controller (0xFFC00500 - 0xFFC005FF) */ |
| #define SPI0_REGBASE 0xFFC00500 |
| #define SPI_CTL 0xFFC00500 /* SPI Control Register */ |
| #define SPI_FLG 0xFFC00504 /* SPI Flag register */ |
| #define SPI_STAT 0xFFC00508 /* SPI Status register */ |
| #define SPI_TDBR 0xFFC0050C /* SPI Transmit Data Buffer Register */ |
| #define SPI_RDBR 0xFFC00510 /* SPI Receive Data Buffer Register */ |
| #define SPI_BAUD 0xFFC00514 /* SPI Baud rate Register */ |
| #define SPI_SHADOW 0xFFC00518 /* SPI_RDBR Shadow Register */ |
| |
| /* TIMER 0, 1, 2 Registers (0xFFC00600 - 0xFFC006FF) */ |
| |
| #define TIMER0_CONFIG 0xFFC00600 /* Timer 0 Configuration Register */ |
| #define TIMER0_COUNTER 0xFFC00604 /* Timer 0 Counter Register */ |
| #define TIMER0_PERIOD 0xFFC00608 /* Timer 0 Period Register */ |
| #define TIMER0_WIDTH 0xFFC0060C /* Timer 0 Width Register */ |
| |
| #define TIMER1_CONFIG 0xFFC00610 /* Timer 1 Configuration Register */ |
| #define TIMER1_COUNTER 0xFFC00614 /* Timer 1 Counter Register */ |
| #define TIMER1_PERIOD 0xFFC00618 /* Timer 1 Period Register */ |
| #define TIMER1_WIDTH 0xFFC0061C /* Timer 1 Width Register */ |
| |
| #define TIMER2_CONFIG 0xFFC00620 /* Timer 2 Configuration Register */ |
| #define TIMER2_COUNTER 0xFFC00624 /* Timer 2 Counter Register */ |
| #define TIMER2_PERIOD 0xFFC00628 /* Timer 2 Period Register */ |
| #define TIMER2_WIDTH 0xFFC0062C /* Timer 2 Width Register */ |
| |
| #define TIMER_ENABLE 0xFFC00640 /* Timer Enable Register */ |
| #define TIMER_DISABLE 0xFFC00644 /* Timer Disable Register */ |
| #define TIMER_STATUS 0xFFC00648 /* Timer Status Register */ |
| |
| /* General Purpose IO (0xFFC00700 - 0xFFC007FF) */ |
| |
| #define FIO_FLAG_D 0xFFC00700 /* Flag Mask to directly specify state of pins */ |
| #define FIO_FLAG_C 0xFFC00704 /* Peripheral Interrupt Flag Register (clear) */ |
| #define FIO_FLAG_S 0xFFC00708 /* Peripheral Interrupt Flag Register (set) */ |
| #define FIO_FLAG_T 0xFFC0070C /* Flag Mask to directly toggle state of pins */ |
| #define FIO_MASKA_D 0xFFC00710 /* Flag Mask Interrupt A Register (set directly) */ |
| #define FIO_MASKA_C 0xFFC00714 /* Flag Mask Interrupt A Register (clear) */ |
| #define FIO_MASKA_S 0xFFC00718 /* Flag Mask Interrupt A Register (set) */ |
| #define FIO_MASKA_T 0xFFC0071C /* Flag Mask Interrupt A Register (toggle) */ |
| #define FIO_MASKB_D 0xFFC00720 /* Flag Mask Interrupt B Register (set directly) */ |
| #define FIO_MASKB_C 0xFFC00724 /* Flag Mask Interrupt B Register (clear) */ |
| #define FIO_MASKB_S 0xFFC00728 /* Flag Mask Interrupt B Register (set) */ |
| #define FIO_MASKB_T 0xFFC0072C /* Flag Mask Interrupt B Register (toggle) */ |
| #define FIO_DIR 0xFFC00730 /* Peripheral Flag Direction Register */ |
| #define FIO_POLAR 0xFFC00734 /* Flag Source Polarity Register */ |
| #define FIO_EDGE 0xFFC00738 /* Flag Source Sensitivity Register */ |
| #define FIO_BOTH 0xFFC0073C /* Flag Set on BOTH Edges Register */ |
| #define FIO_INEN 0xFFC00740 /* Flag Input Enable Register */ |
| |
| /* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */ |
| #define SPORT0_TCR1 0xFFC00800 /* SPORT0 Transmit Configuration 1 Register */ |
| #define SPORT0_TCR2 0xFFC00804 /* SPORT0 Transmit Configuration 2 Register */ |
| #define SPORT0_TCLKDIV 0xFFC00808 /* SPORT0 Transmit Clock Divider */ |
| #define SPORT0_TFSDIV 0xFFC0080C /* SPORT0 Transmit Frame Sync Divider */ |
| #define SPORT0_TX 0xFFC00810 /* SPORT0 TX Data Register */ |
| #define SPORT0_RX 0xFFC00818 /* SPORT0 RX Data Register */ |
| #define SPORT0_RCR1 0xFFC00820 /* SPORT0 Transmit Configuration 1 Register */ |
| #define SPORT0_RCR2 0xFFC00824 /* SPORT0 Transmit Configuration 2 Register */ |
| #define SPORT0_RCLKDIV 0xFFC00828 /* SPORT0 Receive Clock Divider */ |
| #define SPORT0_RFSDIV 0xFFC0082C /* SPORT0 Receive Frame Sync Divider */ |
| #define SPORT0_STAT 0xFFC00830 /* SPORT0 Status Register */ |
| #define SPORT0_CHNL 0xFFC00834 /* SPORT0 Current Channel Register */ |
| #define SPORT0_MCMC1 0xFFC00838 /* SPORT0 Multi-Channel Configuration Register 1 */ |
| #define SPORT0_MCMC2 0xFFC0083C /* SPORT0 Multi-Channel Configuration Register 2 */ |
| #define SPORT0_MTCS0 0xFFC00840 /* SPORT0 Multi-Channel Transmit Select Register 0 */ |
| #define SPORT0_MTCS1 0xFFC00844 /* SPORT0 Multi-Channel Transmit Select Register 1 */ |
| #define SPORT0_MTCS2 0xFFC00848 /* SPORT0 Multi-Channel Transmit Select Register 2 */ |
| #define SPORT0_MTCS3 0xFFC0084C /* SPORT0 Multi-Channel Transmit Select Register 3 */ |
| #define SPORT0_MRCS0 0xFFC00850 /* SPORT0 Multi-Channel Receive Select Register 0 */ |
| #define SPORT0_MRCS1 0xFFC00854 /* SPORT0 Multi-Channel Receive Select Register 1 */ |
| #define SPORT0_MRCS2 0xFFC00858 /* SPORT0 Multi-Channel Receive Select Register 2 */ |
| #define SPORT0_MRCS3 0xFFC0085C /* SPORT0 Multi-Channel Receive Select Register 3 */ |
| |
| /* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */ |
| #define SPORT1_TCR1 0xFFC00900 /* SPORT1 Transmit Configuration 1 Register */ |
| #define SPORT1_TCR2 0xFFC00904 /* SPORT1 Transmit Configuration 2 Register */ |
| #define SPORT1_TCLKDIV 0xFFC00908 /* SPORT1 Transmit Clock Divider */ |
| #define SPORT1_TFSDIV 0xFFC0090C /* SPORT1 Transmit Frame Sync Divider */ |
| #define SPORT1_TX 0xFFC00910 /* SPORT1 TX Data Register */ |
| #define SPORT1_RX 0xFFC00918 /* SPORT1 RX Data Register */ |
| #define SPORT1_RCR1 0xFFC00920 /* SPORT1 Transmit Configuration 1 Register */ |
| #define SPORT1_RCR2 0xFFC00924 /* SPORT1 Transmit Configuration 2 Register */ |
| #define SPORT1_RCLKDIV 0xFFC00928 /* SPORT1 Receive Clock Divider */ |
| #define SPORT1_RFSDIV 0xFFC0092C /* SPORT1 Receive Frame Sync Divider */ |
| #define SPORT1_STAT 0xFFC00930 /* SPORT1 Status Register */ |
| #define SPORT1_CHNL 0xFFC00934 /* SPORT1 Current Channel Register */ |
| #define SPORT1_MCMC1 0xFFC00938 /* SPORT1 Multi-Channel Configuration Register 1 */ |
| #define SPORT1_MCMC2 0xFFC0093C /* SPORT1 Multi-Channel Configuration Register 2 */ |
| #define SPORT1_MTCS0 0xFFC00940 /* SPORT1 Multi-Channel Transmit Select Register 0 */ |
| #define SPORT1_MTCS1 0xFFC00944 /* SPORT1 Multi-Channel Transmit Select Register 1 */ |
| #define SPORT1_MTCS2 0xFFC00948 /* SPORT1 Multi-Channel Transmit Select Register 2 */ |
| #define SPORT1_MTCS3 0xFFC0094C /* SPORT1 Multi-Channel Transmit Select Register 3 */ |
| #define SPORT1_MRCS0 0xFFC00950 /* SPORT1 Multi-Channel Receive Select Register 0 */ |
| #define SPORT1_MRCS1 0xFFC00954 /* SPORT1 Multi-Channel Receive Select Register 1 */ |
| #define SPORT1_MRCS2 0xFFC00958 /* SPORT1 Multi-Channel Receive Select Register 2 */ |
| #define SPORT1_MRCS3 0xFFC0095C /* SPORT1 Multi-Channel Receive Select Register 3 */ |
| |
| /* Asynchronous Memory Controller - External Bus Interface Unit */ |
| #define EBIU_AMGCTL 0xFFC00A00 /* Asynchronous Memory Global Control Register */ |
| #define EBIU_AMBCTL0 0xFFC00A04 /* Asynchronous Memory Bank Control Register 0 */ |
| #define EBIU_AMBCTL1 0xFFC00A08 /* Asynchronous Memory Bank Control Register 1 */ |
| |
| /* SDRAM Controller External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */ |
| |
| #define EBIU_SDGCTL 0xFFC00A10 /* SDRAM Global Control Register */ |
| #define EBIU_SDBCTL 0xFFC00A14 /* SDRAM Bank Control Register */ |
| #define EBIU_SDRRC 0xFFC00A18 /* SDRAM Refresh Rate Control Register */ |
| #define EBIU_SDSTAT 0xFFC00A1C /* SDRAM Status Register */ |
| |
| /* DMA Traffic controls */ |
| #define DMA_TC_PER 0xFFC00B0C /* Traffic Control Periods Register */ |
| #define DMA_TC_CNT 0xFFC00B10 /* Traffic Control Current Counts Register */ |
| |
| /* Alternate deprecated register names (below) provided for backwards code compatibility */ |
| #define DMA_TCPER 0xFFC00B0C /* Traffic Control Periods Register */ |
| #define DMA_TCCNT 0xFFC00B10 /* Traffic Control Current Counts Register */ |
| |
| /* DMA Controller (0xFFC00C00 - 0xFFC00FFF) */ |
| #define DMA0_CONFIG 0xFFC00C08 /* DMA Channel 0 Configuration Register */ |
| #define DMA0_NEXT_DESC_PTR 0xFFC00C00 /* DMA Channel 0 Next Descriptor Pointer Register */ |
| #define DMA0_START_ADDR 0xFFC00C04 /* DMA Channel 0 Start Address Register */ |
| #define DMA0_X_COUNT 0xFFC00C10 /* DMA Channel 0 X Count Register */ |
| #define DMA0_Y_COUNT 0xFFC00C18 /* DMA Channel 0 Y Count Register */ |
| #define DMA0_X_MODIFY 0xFFC00C14 /* DMA Channel 0 X Modify Register */ |
| #define DMA0_Y_MODIFY 0xFFC00C1C /* DMA Channel 0 Y Modify Register */ |
| #define DMA0_CURR_DESC_PTR 0xFFC00C20 /* DMA Channel 0 Current Descriptor Pointer Register */ |
| #define DMA0_CURR_ADDR 0xFFC00C24 /* DMA Channel 0 Current Address Register */ |
| #define DMA0_CURR_X_COUNT 0xFFC00C30 /* DMA Channel 0 Current X Count Register */ |
| #define DMA0_CURR_Y_COUNT 0xFFC00C38 /* DMA Channel 0 Current Y Count Register */ |
| #define DMA0_IRQ_STATUS 0xFFC00C28 /* DMA Channel 0 Interrupt/Status Register */ |
| #define DMA0_PERIPHERAL_MAP 0xFFC00C2C /* DMA Channel 0 Peripheral Map Register */ |
| |
| #define DMA1_CONFIG 0xFFC00C48 /* DMA Channel 1 Configuration Register */ |
| #define DMA1_NEXT_DESC_PTR 0xFFC00C40 /* DMA Channel 1 Next Descriptor Pointer Register */ |
| #define DMA1_START_ADDR 0xFFC00C44 /* DMA Channel 1 Start Address Register */ |
| #define DMA1_X_COUNT 0xFFC00C50 /* DMA Channel 1 X Count Register */ |
| #define DMA1_Y_COUNT 0xFFC00C58 /* DMA Channel 1 Y Count Register */ |
| #define DMA1_X_MODIFY 0xFFC00C54 /* DMA Channel 1 X Modify Register */ |
| #define DMA1_Y_MODIFY 0xFFC00C5C /* DMA Channel 1 Y Modify Register */ |
| #define DMA1_CURR_DESC_PTR 0xFFC00C60 /* DMA Channel 1 Current Descriptor Pointer Register */ |
| #define DMA1_CURR_ADDR 0xFFC00C64 /* DMA Channel 1 Current Address Register */ |
| #define DMA1_CURR_X_COUNT 0xFFC00C70 /* DMA Channel 1 Current X Count Register */ |
| #define DMA1_CURR_Y_COUNT 0xFFC00C78 /* DMA Channel 1 Current Y Count Register */ |
| #define DMA1_IRQ_STATUS 0xFFC00C68 /* DMA Channel 1 Interrupt/Status Register */ |
| #define DMA1_PERIPHERAL_MAP 0xFFC00C6C /* DMA Channel 1 Peripheral Map Register */ |
| |
| #define DMA2_CONFIG 0xFFC00C88 /* DMA Channel 2 Configuration Register */ |
| #define DMA2_NEXT_DESC_PTR 0xFFC00C80 /* DMA Channel 2 Next Descriptor Pointer Register */ |
| #define DMA2_START_ADDR 0xFFC00C84 /* DMA Channel 2 Start Address Register */ |
| #define DMA2_X_COUNT 0xFFC00C90 /* DMA Channel 2 X Count Register */ |
| #define DMA2_Y_COUNT 0xFFC00C98 /* DMA Channel 2 Y Count Register */ |
| #define DMA2_X_MODIFY 0xFFC00C94 /* DMA Channel 2 X Modify Register */ |
| #define DMA2_Y_MODIFY 0xFFC00C9C /* DMA Channel 2 Y Modify Register */ |
| #define DMA2_CURR_DESC_PTR 0xFFC00CA0 /* DMA Channel 2 Current Descriptor Pointer Register */ |
| #define DMA2_CURR_ADDR 0xFFC00CA4 /* DMA Channel 2 Current Address Register */ |
| #define DMA2_CURR_X_COUNT 0xFFC00CB0 /* DMA Channel 2 Current X Count Register */ |
| #define DMA2_CURR_Y_COUNT 0xFFC00CB8 /* DMA Channel 2 Current Y Count Register */ |
| #define DMA2_IRQ_STATUS 0xFFC00CA8 /* DMA Channel 2 Interrupt/Status Register */ |
| #define DMA2_PERIPHERAL_MAP 0xFFC00CAC /* DMA Channel 2 Peripheral Map Register */ |
| |
| #define DMA3_CONFIG 0xFFC00CC8 /* DMA Channel 3 Configuration Register */ |
| #define DMA3_NEXT_DESC_PTR 0xFFC00CC0 /* DMA Channel 3 Next Descriptor Pointer Register */ |
| #define DMA3_START_ADDR 0xFFC00CC4 /* DMA Channel 3 Start Address Register */ |
| #define DMA3_X_COUNT 0xFFC00CD0 /* DMA Channel 3 X Count Register */ |
| #define DMA3_Y_COUNT 0xFFC00CD8 /* DMA Channel 3 Y Count Register */ |
| #define DMA3_X_MODIFY 0xFFC00CD4 /* DMA Channel 3 X Modify Register */ |
| #define DMA3_Y_MODIFY 0xFFC00CDC /* DMA Channel 3 Y Modify Register */ |
| #define DMA3_CURR_DESC_PTR 0xFFC00CE0 /* DMA Channel 3 Current Descriptor Pointer Register */ |
| #define DMA3_CURR_ADDR 0xFFC00CE4 /* DMA Channel 3 Current Address Register */ |
| #define DMA3_CURR_X_COUNT 0xFFC00CF0 /* DMA Channel 3 Current X Count Register */ |
| #define DMA3_CURR_Y_COUNT 0xFFC00CF8 /* DMA Channel 3 Current Y Count Register */ |
| #define DMA3_IRQ_STATUS 0xFFC00CE8 /* DMA Channel 3 Interrupt/Status Register */ |
| #define DMA3_PERIPHERAL_MAP 0xFFC00CEC /* DMA Channel 3 Peripheral Map Register */ |
| |
| #define DMA4_CONFIG 0xFFC00D08 /* DMA Channel 4 Configuration Register */ |
| #define DMA4_NEXT_DESC_PTR 0xFFC00D00 /* DMA Channel 4 Next Descriptor Pointer Register */ |
| #define DMA4_START_ADDR 0xFFC00D04 /* DMA Channel 4 Start Address Register */ |
| #define DMA4_X_COUNT 0xFFC00D10 /* DMA Channel 4 X Count Register */ |
| #define DMA4_Y_COUNT 0xFFC00D18 /* DMA Channel 4 Y Count Register */ |
| #define DMA4_X_MODIFY 0xFFC00D14 /* DMA Channel 4 X Modify Register */ |
| #define DMA4_Y_MODIFY 0xFFC00D1C /* DMA Channel 4 Y Modify Register */ |
| #define DMA4_CURR_DESC_PTR 0xFFC00D20 /* DMA Channel 4 Current Descriptor Pointer Register */ |
| #define DMA4_CURR_ADDR 0xFFC00D24 /* DMA Channel 4 Current Address Register */ |
| #define DMA4_CURR_X_COUNT 0xFFC00D30 /* DMA Channel 4 Current X Count Register */ |
| #define DMA4_CURR_Y_COUNT 0xFFC00D38 /* DMA Channel 4 Current Y Count Register */ |
| #define DMA4_IRQ_STATUS 0xFFC00D28 /* DMA Channel 4 Interrupt/Status Register */ |
| #define DMA4_PERIPHERAL_MAP 0xFFC00D2C /* DMA Channel 4 Peripheral Map Register */ |
| |
| #define DMA5_CONFIG 0xFFC00D48 /* DMA Channel 5 Configuration Register */ |
| #define DMA5_NEXT_DESC_PTR 0xFFC00D40 /* DMA Channel 5 Next Descriptor Pointer Register */ |
| #define DMA5_START_ADDR 0xFFC00D44 /* DMA Channel 5 Start Address Register */ |
| #define DMA5_X_COUNT 0xFFC00D50 /* DMA Channel 5 X Count Register */ |
| #define DMA5_Y_COUNT 0xFFC00D58 /* DMA Channel 5 Y Count Register */ |
| #define DMA5_X_MODIFY 0xFFC00D54 /* DMA Channel 5 X Modify Register */ |
| #define DMA5_Y_MODIFY 0xFFC00D5C /* DMA Channel 5 Y Modify Register */ |
| #define DMA5_CURR_DESC_PTR 0xFFC00D60 /* DMA Channel 5 Current Descriptor Pointer Register */ |
| #define DMA5_CURR_ADDR 0xFFC00D64 /* DMA Channel 5 Current Address Register */ |
| #define DMA5_CURR_X_COUNT 0xFFC00D70 /* DMA Channel 5 Current X Count Register */ |
| #define DMA5_CURR_Y_COUNT 0xFFC00D78 /* DMA Channel 5 Current Y Count Register */ |
| #define DMA5_IRQ_STATUS 0xFFC00D68 /* DMA Channel 5 Interrupt/Status Register */ |
| #define DMA5_PERIPHERAL_MAP 0xFFC00D6C /* DMA Channel 5 Peripheral Map Register */ |
| |
| #define DMA6_CONFIG 0xFFC00D88 /* DMA Channel 6 Configuration Register */ |
| #define DMA6_NEXT_DESC_PTR 0xFFC00D80 /* DMA Channel 6 Next Descriptor Pointer Register */ |
| #define DMA6_START_ADDR 0xFFC00D84 /* DMA Channel 6 Start Address Register */ |
| #define DMA6_X_COUNT 0xFFC00D90 /* DMA Channel 6 X Count Register */ |
| #define DMA6_Y_COUNT 0xFFC00D98 /* DMA Channel 6 Y Count Register */ |
| #define DMA6_X_MODIFY 0xFFC00D94 /* DMA Channel 6 X Modify Register */ |
| #define DMA6_Y_MODIFY 0xFFC00D9C /* DMA Channel 6 Y Modify Register */ |
| #define DMA6_CURR_DESC_PTR 0xFFC00DA0 /* DMA Channel 6 Current Descriptor Pointer Register */ |
| #define DMA6_CURR_ADDR 0xFFC00DA4 /* DMA Channel 6 Current Address Register */ |
| #define DMA6_CURR_X_COUNT 0xFFC00DB0 /* DMA Channel 6 Current X Count Register */ |
| #define DMA6_CURR_Y_COUNT 0xFFC00DB8 /* DMA Channel 6 Current Y Count Register */ |
| #define DMA6_IRQ_STATUS 0xFFC00DA8 /* DMA Channel 6 Interrupt/Status Register */ |
| #define DMA6_PERIPHERAL_MAP 0xFFC00DAC /* DMA Channel 6 Peripheral Map Register */ |
| |
| #define DMA7_CONFIG 0xFFC00DC8 /* DMA Channel 7 Configuration Register */ |
| #define DMA7_NEXT_DESC_PTR 0xFFC00DC0 /* DMA Channel 7 Next Descriptor Pointer Register */ |
| #define DMA7_START_ADDR 0xFFC00DC4 /* DMA Channel 7 Start Address Register */ |
| #define DMA7_X_COUNT 0xFFC00DD0 /* DMA Channel 7 X Count Register */ |
| #define DMA7_Y_COUNT 0xFFC00DD8 /* DMA Channel 7 Y Count Register */ |
| #define DMA7_X_MODIFY 0xFFC00DD4 /* DMA Channel 7 X Modify Register */ |
| #define DMA7_Y_MODIFY 0xFFC00DDC /* DMA Channel 7 Y Modify Register */ |
| #define DMA7_CURR_DESC_PTR 0xFFC00DE0 /* DMA Channel 7 Current Descriptor Pointer Register */ |
| #define DMA7_CURR_ADDR 0xFFC00DE4 /* DMA Channel 7 Current Address Register */ |
| #define DMA7_CURR_X_COUNT 0xFFC00DF0 /* DMA Channel 7 Current X Count Register */ |
| #define DMA7_CURR_Y_COUNT 0xFFC00DF8 /* DMA Channel 7 Current Y Count Register */ |
| #define DMA7_IRQ_STATUS 0xFFC00DE8 /* DMA Channel 7 Interrupt/Status Register */ |
| #define DMA7_PERIPHERAL_MAP 0xFFC00DEC /* DMA Channel 7 Peripheral Map Register */ |
| |
| #define MDMA_D1_CONFIG 0xFFC00E88 /* MemDMA Stream 1 Destination Configuration Register */ |
| #define MDMA_D1_NEXT_DESC_PTR 0xFFC00E80 /* MemDMA Stream 1 Destination Next Descriptor Pointer Register */ |
| #define MDMA_D1_START_ADDR 0xFFC00E84 /* MemDMA Stream 1 Destination Start Address Register */ |
| #define MDMA_D1_X_COUNT 0xFFC00E90 /* MemDMA Stream 1 Destination X Count Register */ |
| #define MDMA_D1_Y_COUNT 0xFFC00E98 /* MemDMA Stream 1 Destination Y Count Register */ |
| #define MDMA_D1_X_MODIFY 0xFFC00E94 /* MemDMA Stream 1 Destination X Modify Register */ |
| #define MDMA_D1_Y_MODIFY 0xFFC00E9C /* MemDMA Stream 1 Destination Y Modify Register */ |
| #define MDMA_D1_CURR_DESC_PTR 0xFFC00EA0 /* MemDMA Stream 1 Destination Current Descriptor Pointer Register */ |
| #define MDMA_D1_CURR_ADDR 0xFFC00EA4 /* MemDMA Stream 1 Destination Current Address Register */ |
| #define MDMA_D1_CURR_X_COUNT 0xFFC00EB0 /* MemDMA Stream 1 Destination Current X Count Register */ |
| #define MDMA_D1_CURR_Y_COUNT 0xFFC00EB8 /* MemDMA Stream 1 Destination Current Y Count Register */ |
| #define MDMA_D1_IRQ_STATUS 0xFFC00EA8 /* MemDMA Stream 1 Destination Interrupt/Status Register */ |
| #define MDMA_D1_PERIPHERAL_MAP 0xFFC00EAC /* MemDMA Stream 1 Destination Peripheral Map Register */ |
| |
| #define MDMA_S1_CONFIG 0xFFC00EC8 /* MemDMA Stream 1 Source Configuration Register */ |
| #define MDMA_S1_NEXT_DESC_PTR 0xFFC00EC0 /* MemDMA Stream 1 Source Next Descriptor Pointer Register */ |
| #define MDMA_S1_START_ADDR 0xFFC00EC4 /* MemDMA Stream 1 Source Start Address Register */ |
| #define MDMA_S1_X_COUNT 0xFFC00ED0 /* MemDMA Stream 1 Source X Count Register */ |
| #define MDMA_S1_Y_COUNT 0xFFC00ED8 /* MemDMA Stream 1 Source Y Count Register */ |
| #define MDMA_S1_X_MODIFY 0xFFC00ED4 /* MemDMA Stream 1 Source X Modify Register */ |
| #define MDMA_S1_Y_MODIFY 0xFFC00EDC /* MemDMA Stream 1 Source Y Modify Register */ |
| #define MDMA_S1_CURR_DESC_PTR 0xFFC00EE0 /* MemDMA Stream 1 Source Current Descriptor Pointer Register */ |
| #define MDMA_S1_CURR_ADDR 0xFFC00EE4 /* MemDMA Stream 1 Source Current Address Register */ |
| #define MDMA_S1_CURR_X_COUNT 0xFFC00EF0 /* MemDMA Stream 1 Source Current X Count Register */ |
| #define MDMA_S1_CURR_Y_COUNT 0xFFC00EF8 /* MemDMA Stream 1 Source Current Y Count Register */ |
| #define MDMA_S1_IRQ_STATUS 0xFFC00EE8 /* MemDMA Stream 1 Source Interrupt/Status Register */ |
| #define MDMA_S1_PERIPHERAL_MAP 0xFFC00EEC /* MemDMA Stream 1 Source Peripheral Map Register */ |
| |
| #define MDMA_D0_CONFIG 0xFFC00E08 /* MemDMA Stream 0 Destination Configuration Register */ |
| #define MDMA_D0_NEXT_DESC_PTR 0xFFC00E00 /* MemDMA Stream 0 Destination Next Descriptor Pointer Register */ |
| #define MDMA_D0_START_ADDR 0xFFC00E04 /* MemDMA Stream 0 Destination Start Address Register */ |
| #define MDMA_D0_X_COUNT 0xFFC00E10 /* MemDMA Stream 0 Destination X Count Register */ |
| #define MDMA_D0_Y_COUNT 0xFFC00E18 /* MemDMA Stream 0 Destination Y Count Register */ |
| #define MDMA_D0_X_MODIFY 0xFFC00E14 /* MemDMA Stream 0 Destination X Modify Register */ |
| #define MDMA_D0_Y_MODIFY 0xFFC00E1C /* MemDMA Stream 0 Destination Y Modify Register */ |
| #define MDMA_D0_CURR_DESC_PTR 0xFFC00E20 /* MemDMA Stream 0 Destination Current Descriptor Pointer Register */ |
| #define MDMA_D0_CURR_ADDR 0xFFC00E24 /* MemDMA Stream 0 Destination Current Address Register */ |
| #define MDMA_D0_CURR_X_COUNT 0xFFC00E30 /* MemDMA Stream 0 Destination Current X Count Register */ |
| #define MDMA_D0_CURR_Y_COUNT 0xFFC00E38 /* MemDMA Stream 0 Destination Current Y Count Register */ |
| #define MDMA_D0_IRQ_STATUS 0xFFC00E28 /* MemDMA Stream 0 Destination Interrupt/Status Register */ |
| #define MDMA_D0_PERIPHERAL_MAP 0xFFC00E2C /* MemDMA Stream 0 Destination Peripheral Map Register */ |
| |
| #define MDMA_S0_CONFIG 0xFFC00E48 /* MemDMA Stream 0 Source Configuration Register */ |
| #define MDMA_S0_NEXT_DESC_PTR 0xFFC00E40 /* MemDMA Stream 0 Source Next Descriptor Pointer Register */ |
| #define MDMA_S0_START_ADDR 0xFFC00E44 /* MemDMA Stream 0 Source Start Address Register */ |
| #define MDMA_S0_X_COUNT 0xFFC00E50 /* MemDMA Stream 0 Source X Count Register */ |
| #define MDMA_S0_Y_COUNT 0xFFC00E58 /* MemDMA Stream 0 Source Y Count Register */ |
| #define MDMA_S0_X_MODIFY 0xFFC00E54 /* MemDMA Stream 0 Source X Modify Register */ |
| #define MDMA_S0_Y_MODIFY 0xFFC00E5C /* MemDMA Stream 0 Source Y Modify Register */ |
| #define MDMA_S0_CURR_DESC_PTR 0xFFC00E60 /* MemDMA Stream 0 Source Current Descriptor Pointer Register */ |
| #define MDMA_S0_CURR_ADDR 0xFFC00E64 /* MemDMA Stream 0 Source Current Address Register */ |
| #define MDMA_S0_CURR_X_COUNT 0xFFC00E70 /* MemDMA Stream 0 Source Current X Count Register */ |
| #define MDMA_S0_CURR_Y_COUNT 0xFFC00E78 /* MemDMA Stream 0 Source Current Y Count Register */ |
| #define MDMA_S0_IRQ_STATUS 0xFFC00E68 /* MemDMA Stream 0 Source Interrupt/Status Register */ |
| #define MDMA_S0_PERIPHERAL_MAP 0xFFC00E6C /* MemDMA Stream 0 Source Peripheral Map Register */ |
| |
| /* Parallel Peripheral Interface (PPI) (0xFFC01000 - 0xFFC010FF) */ |
| |
| #define PPI_CONTROL 0xFFC01000 /* PPI Control Register */ |
| #define PPI_STATUS 0xFFC01004 /* PPI Status Register */ |
| #define PPI_COUNT 0xFFC01008 /* PPI Transfer Count Register */ |
| #define PPI_DELAY 0xFFC0100C /* PPI Delay Count Register */ |
| #define PPI_FRAME 0xFFC01010 /* PPI Frame Length Register */ |
| |
| /*********************************************************************************** */ |
| /* System MMR Register Bits */ |
| /******************************************************************************* */ |
| |
| /* ********************* PLL AND RESET MASKS ************************ */ |
| |
| /* PLL_CTL Masks */ |
| #define PLL_CLKIN 0x0000 /* Pass CLKIN to PLL */ |
| #define PLL_CLKIN_DIV2 0x0001 /* Pass CLKIN/2 to PLL */ |
| #define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */ |
| #define PLL_OFF 0x0002 /* Shut off PLL clocks */ |
| #define STOPCK_OFF 0x0008 /* Core clock off */ |
| #define STOPCK 0x0008 /* Core Clock Off */ |
| #define PDWN 0x0020 /* Put the PLL in a Deep Sleep state */ |
| #if !defined(__ADSPBF538__) |
| /* this file is included in defBF538.h but IN_DELAY/OUT_DELAY are different */ |
| # define IN_DELAY 0x0040 /* Add 200ps Delay To EBIU Input Latches */ |
| # define OUT_DELAY 0x0080 /* Add 200ps Delay To EBIU Output Signals */ |
| #endif |
| #define BYPASS 0x0100 /* Bypass the PLL */ |
| /* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits) */ |
| #define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */ |
| |
| /* PLL_DIV Masks */ |
| #define SSEL 0x000F /* System Select */ |
| #define CSEL 0x0030 /* Core Select */ |
| |
| #define SCLK_DIV(x) (x) /* SCLK = VCO / x */ |
| |
| #define CCLK_DIV1 0x00000000 /* CCLK = VCO / 1 */ |
| #define CCLK_DIV2 0x00000010 /* CCLK = VCO / 2 */ |
| #define CCLK_DIV4 0x00000020 /* CCLK = VCO / 4 */ |
| #define CCLK_DIV8 0x00000030 /* CCLK = VCO / 8 */ |
| /* PLL_DIV Macros */ |
| #define SET_SSEL(x) ((x)&0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */ |
| |
| /* PLL_STAT Masks */ |
| #define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */ |
| #define FULL_ON 0x0002 /* Processor In Full On Mode */ |
| #define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */ |
| #define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */ |
| |
| /* VR_CTL Masks */ |
| #define FREQ 0x0003 /* Switching Oscillator Frequency For Regulator */ |
| #define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */ |
| #define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */ |
| #define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */ |
| #define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */ |
| |
| #define GAIN 0x000C /* Voltage Level Gain */ |
| #define GAIN_5 0x0000 /* GAIN = 5 */ |
| #define GAIN_10 0x0004 /* GAIN = 10 */ |
| #define GAIN_20 0x0008 /* GAIN = 20 */ |
| #define GAIN_50 0x000C /* GAIN = 50 */ |
| |
| #define VLEV 0x00F0 /* Internal Voltage Level */ |
| #define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ |
| #define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */ |
| #define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */ |
| #define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */ |
| #define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */ |
| #define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */ |
| #define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */ |
| #define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */ |
| |
| #define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */ |
| #define SCKELOW 0x8000 /* Do Not Drive SCKE High During Reset After Hibernate */ |
| |
| /* CHIPID Masks */ |
| #define CHIPID_VERSION 0xF0000000 |
| #define CHIPID_FAMILY 0x0FFFF000 |
| #define CHIPID_MANUFACTURE 0x00000FFE |
| |
| /* SWRST Mask */ |
| #define SYSTEM_RESET 0x0007 /* Initiates A System Software Reset */ |
| #define DOUBLE_FAULT 0x0008 /* Core Double Fault Causes Reset */ |
| #define RESET_DOUBLE 0x2000 /* SW Reset Generated By Core Double-Fault */ |
| #define RESET_WDOG 0x4000 /* SW Reset Generated By Watchdog Timer */ |
| #define RESET_SOFTWARE 0x8000 /* SW Reset Occurred Since Last Read Of SWRST */ |
| |
| /* SYSCR Masks */ |
| #define BMODE 0x0006 /* Boot Mode - Latched During HW Reset From Mode Pins */ |
| #define NOBOOT 0x0010 /* Execute From L1 or ASYNC Bank 0 When BMODE = 0 */ |
| |
| /* ************* SYSTEM INTERRUPT CONTROLLER MASKS ***************** */ |
| |
| /* SIC_IAR0 Masks */ |
| |
| #define P0_IVG(x) ((x)-7) /* Peripheral #0 assigned IVG #x */ |
| #define P1_IVG(x) ((x)-7) << 0x4 /* Peripheral #1 assigned IVG #x */ |
| #define P2_IVG(x) ((x)-7) << 0x8 /* Peripheral #2 assigned IVG #x */ |
| #define P3_IVG(x) ((x)-7) << 0xC /* Peripheral #3 assigned IVG #x */ |
| #define P4_IVG(x) ((x)-7) << 0x10 /* Peripheral #4 assigned IVG #x */ |
| #define P5_IVG(x) ((x)-7) << 0x14 /* Peripheral #5 assigned IVG #x */ |
| #define P6_IVG(x) ((x)-7) << 0x18 /* Peripheral #6 assigned IVG #x */ |
| #define P7_IVG(x) ((x)-7) << 0x1C /* Peripheral #7 assigned IVG #x */ |
| |
| /* SIC_IAR1 Masks */ |
| |
| #define P8_IVG(x) ((x)-7) /* Peripheral #8 assigned IVG #x */ |
| #define P9_IVG(x) ((x)-7) << 0x4 /* Peripheral #9 assigned IVG #x */ |
| #define P10_IVG(x) ((x)-7) << 0x8 /* Peripheral #10 assigned IVG #x */ |
| #define P11_IVG(x) ((x)-7) << 0xC /* Peripheral #11 assigned IVG #x */ |
| #define P12_IVG(x) ((x)-7) << 0x10 /* Peripheral #12 assigned IVG #x */ |
| #define P13_IVG(x) ((x)-7) << 0x14 /* Peripheral #13 assigned IVG #x */ |
| #define P14_IVG(x) ((x)-7) << 0x18 /* Peripheral #14 assigned IVG #x */ |
| #define P15_IVG(x) ((x)-7) << 0x1C /* Peripheral #15 assigned IVG #x */ |
| |
| /* SIC_IAR2 Masks */ |
| #define P16_IVG(x) ((x)-7) /* Peripheral #16 assigned IVG #x */ |
| #define P17_IVG(x) ((x)-7) << 0x4 /* Peripheral #17 assigned IVG #x */ |
| #define P18_IVG(x) ((x)-7) << 0x8 /* Peripheral #18 assigned IVG #x */ |
| #define P19_IVG(x) ((x)-7) << 0xC /* Peripheral #19 assigned IVG #x */ |
| #define P20_IVG(x) ((x)-7) << 0x10 /* Peripheral #20 assigned IVG #x */ |
| #define P21_IVG(x) ((x)-7) << 0x14 /* Peripheral #21 assigned IVG #x */ |
| #define P22_IVG(x) ((x)-7) << 0x18 /* Peripheral #22 assigned IVG #x */ |
| #define P23_IVG(x) ((x)-7) << 0x1C /* Peripheral #23 assigned IVG #x */ |
| |
| /* SIC_IMASK Masks */ |
| #define SIC_UNMASK_ALL 0x00000000 /* Unmask all peripheral interrupts */ |
| #define SIC_MASK_ALL 0xFFFFFFFF /* Mask all peripheral interrupts */ |
| #define SIC_MASK(x) (1 << (x)) /* Mask Peripheral #x interrupt */ |
| #define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << (x))) /* Unmask Peripheral #x interrupt */ |
| |
| /* SIC_IWR Masks */ |
| #define IWR_DISABLE_ALL 0x00000000 /* Wakeup Disable all peripherals */ |
| #define IWR_ENABLE_ALL 0xFFFFFFFF /* Wakeup Enable all peripherals */ |
| #define IWR_ENABLE(x) (1 << (x)) /* Wakeup Enable Peripheral #x */ |
| #define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << (x))) /* Wakeup Disable Peripheral #x */ |
| |
| /* ***************************** UART CONTROLLER MASKS ********************** */ |
| |
| /* UART_LCR Register */ |
| |
| #define DLAB 0x80 |
| #define SB 0x40 |
| #define STP 0x20 |
| #define EPS 0x10 |
| #define PEN 0x08 |
| #define STB 0x04 |
| #define WLS(x) ((x-5) & 0x03) |
| |
| #define DLAB_P 0x07 |
| #define SB_P 0x06 |
| #define STP_P 0x05 |
| #define EPS_P 0x04 |
| #define PEN_P 0x03 |
| #define STB_P 0x02 |
| #define WLS_P1 0x01 |
| #define WLS_P0 0x00 |
| |
| /* UART_MCR Register */ |
| #define LOOP_ENA 0x10 |
| #define LOOP_ENA_P 0x04 |
| |
| /* UART_LSR Register */ |
| #define TEMT 0x40 |
| #define THRE 0x20 |
| #define BI 0x10 |
| #define FE 0x08 |
| #define PE 0x04 |
| #define OE 0x02 |
| #define DR 0x01 |
| |
| #define TEMP_P 0x06 |
| #define THRE_P 0x05 |
| #define BI_P 0x04 |
| #define FE_P 0x03 |
| #define PE_P 0x02 |
| #define OE_P 0x01 |
| #define DR_P 0x00 |
| |
| /* UART_IER Register */ |
| #define ELSI 0x04 |
| #define ETBEI 0x02 |
| #define ERBFI 0x01 |
| |
| #define ELSI_P 0x02 |
| #define ETBEI_P 0x01 |
| #define ERBFI_P 0x00 |
| |
| /* UART_IIR Register */ |
| #define STATUS(x) ((x << 1) & 0x06) |
| #define NINT 0x01 |
| #define STATUS_P1 0x02 |
| #define STATUS_P0 0x01 |
| #define NINT_P 0x00 |
| #define IIR_TX_READY 0x02 /* UART_THR empty */ |
| #define IIR_RX_READY 0x04 /* Receive data ready */ |
| #define IIR_LINE_CHANGE 0x06 /* Receive line status */ |
| #define IIR_STATUS 0x06 |
| |
| /* UART_GCTL Register */ |
| #define FFE 0x20 |
| #define FPE 0x10 |
| #define RPOLC 0x08 |
| #define TPOLC 0x04 |
| #define IREN 0x02 |
| #define UCEN 0x01 |
| |
| #define FFE_P 0x05 |
| #define FPE_P 0x04 |
| #define RPOLC_P 0x03 |
| #define TPOLC_P 0x02 |
| #define IREN_P 0x01 |
| #define UCEN_P 0x00 |
| |
| /* ********** SERIAL PORT MASKS ********************** */ |
| |
| /* SPORTx_TCR1 Masks */ |
| #define TSPEN 0x0001 /* TX enable */ |
| #define ITCLK 0x0002 /* Internal TX Clock Select */ |
| #define TDTYPE 0x000C /* TX Data Formatting Select */ |
| #define DTYPE_NORM 0x0000 /* Data Format Normal */ |
| #define DTYPE_ULAW 0x0008 /* Compand Using u-Law */ |
| #define DTYPE_ALAW 0x000C /* Compand Using A-Law */ |
| #define TLSBIT 0x0010 /* TX Bit Order */ |
| #define ITFS 0x0200 /* Internal TX Frame Sync Select */ |
| #define TFSR 0x0400 /* TX Frame Sync Required Select */ |
| #define DITFS 0x0800 /* Data Independent TX Frame Sync Select */ |
| #define LTFS 0x1000 /* Low TX Frame Sync Select */ |
| #define LATFS 0x2000 /* Late TX Frame Sync Select */ |
| #define TCKFE 0x4000 /* TX Clock Falling Edge Select */ |
| |
| /* SPORTx_TCR2 Masks */ |
| #if defined(__ADSPBF531__) || defined(__ADSPBF532__) || \ |
| defined(__ADSPBF533__) |
| # define SLEN 0x001F /*TX Word Length */ |
| #else |
| # define SLEN(x) ((x)&0x1F) /* SPORT TX Word Length (2 - 31) */ |
| #endif |
| #define TXSE 0x0100 /*TX Secondary Enable */ |
| #define TSFSE 0x0200 /*TX Stereo Frame Sync Enable */ |
| #define TRFST 0x0400 /*TX Right-First Data Order */ |
| |
| /* SPORTx_RCR1 Masks */ |
| #define RSPEN 0x0001 /* RX enable */ |
| #define IRCLK 0x0002 /* Internal RX Clock Select */ |
| #define RDTYPE 0x000C /* RX Data Formatting Select */ |
| #define DTYPE_NORM 0x0000 /* no companding */ |
| #define DTYPE_ULAW 0x0008 /* Compand Using u-Law */ |
| #define DTYPE_ALAW 0x000C /* Compand Using A-Law */ |
| #define RLSBIT 0x0010 /* RX Bit Order */ |
| #define IRFS 0x0200 /* Internal RX Frame Sync Select */ |
| #define RFSR 0x0400 /* RX Frame Sync Required Select */ |
| #define LRFS 0x1000 /* Low RX Frame Sync Select */ |
| #define LARFS 0x2000 /* Late RX Frame Sync Select */ |
| #define RCKFE 0x4000 /* RX Clock Falling Edge Select */ |
| |
| /* SPORTx_RCR2 Masks */ |
| /* SLEN defined above */ |
| #define RXSE 0x0100 /*RX Secondary Enable */ |
| #define RSFSE 0x0200 /*RX Stereo Frame Sync Enable */ |
| #define RRFST 0x0400 /*Right-First Data Order */ |
| |
| /*SPORTx_STAT Masks */ |
| #define RXNE 0x0001 /*RX FIFO Not Empty Status */ |
| #define RUVF 0x0002 /*RX Underflow Status */ |
| #define ROVF 0x0004 /*RX Overflow Status */ |
| #define TXF 0x0008 /*TX FIFO Full Status */ |
| #define TUVF 0x0010 /*TX Underflow Status */ |
| #define TOVF 0x0020 /*TX Overflow Status */ |
| #define TXHRE 0x0040 /*TX Hold Register Empty */ |
| |
| /*SPORTx_MCMC1 Masks */ |
| #define SP_WSIZE 0x0000F000 /*Multichannel Window Size Field */ |
| #define SP_WOFF 0x000003FF /*Multichannel Window Offset Field */ |
| /* SPORTx_MCMC1 Macros */ |
| #define SET_SP_WOFF(x) ((x) & 0x3FF) /* Multichannel Window Offset Field */ |
| /* Only use SET_WSIZE Macro With Logic OR While Setting Lower Order Bits */ |
| #define SET_SP_WSIZE(x) (((((x)>>0x3)-1)&0xF) << 0xC) /* Multichannel Window Size = (x/8)-1 */ |
| |
| /*SPORTx_MCMC2 Masks */ |
| #define MCCRM 0x00000003 /*Multichannel Clock Recovery Mode */ |
| #define REC_BYPASS 0x0000 /* Bypass Mode (No Clock Recovery) */ |
| #define REC_2FROM4 0x0002 /* Recover 2 MHz Clock from 4 MHz Clock */ |
| #define REC_8FROM16 0x0003 /* Recover 8 MHz Clock from 16 MHz Clock */ |
| #define MCDTXPE 0x00000004 /*Multichannel DMA Transmit Packing */ |
| #define MCDRXPE 0x00000008 /*Multichannel DMA Receive Packing */ |
| #define MCMEN 0x00000010 /*Multichannel Frame Mode Enable */ |
| #define FSDR 0x00000080 /*Multichannel Frame Sync to Data Relationship */ |
| #define MFD 0x0000F000 /*Multichannel Frame Delay */ |
| #define MFD_0 0x0000 /* Multichannel Frame Delay = 0 */ |
| #define MFD_1 0x1000 /* Multichannel Frame Delay = 1 */ |
| #define MFD_2 0x2000 /* Multichannel Frame Delay = 2 */ |
| #define MFD_3 0x3000 /* Multichannel Frame Delay = 3 */ |
| #define MFD_4 0x4000 /* Multichannel Frame Delay = 4 */ |
| #define MFD_5 0x5000 /* Multichannel Frame Delay = 5 */ |
| #define MFD_6 0x6000 /* Multichannel Frame Delay = 6 */ |
| #define MFD_7 0x7000 /* Multichannel Frame Delay = 7 */ |
| #define MFD_8 0x8000 /* Multichannel Frame Delay = 8 */ |
| #define MFD_9 0x9000 /* Multichannel Frame Delay = 9 */ |
| #define MFD_10 0xA000 /* Multichannel Frame Delay = 10 */ |
| #define MFD_11 0xB000 /* Multichannel Frame Delay = 11 */ |
| #define MFD_12 0xC000 /* Multichannel Frame Delay = 12 */ |
| #define MFD_13 0xD000 /* Multichannel Frame Delay = 13 */ |
| #define MFD_14 0xE000 /* Multichannel Frame Delay = 14 */ |
| #define MFD_15 0xF000 /* Multichannel Frame Delay = 15 */ |
| |
| /* ********* PARALLEL PERIPHERAL INTERFACE (PPI) MASKS **************** */ |
| |
| /* PPI_CONTROL Masks */ |
| #define PORT_EN 0x00000001 /* PPI Port Enable */ |
| #define PORT_DIR 0x00000002 /* PPI Port Direction */ |
| #define XFR_TYPE 0x0000000C /* PPI Transfer Type */ |
| #define PORT_CFG 0x00000030 /* PPI Port Configuration */ |
| #define FLD_SEL 0x00000040 /* PPI Active Field Select */ |
| #define PACK_EN 0x00000080 /* PPI Packing Mode */ |
| #define DMA32 0x00000100 /* PPI 32-bit DMA Enable */ |
| #define SKIP_EN 0x00000200 /* PPI Skip Element Enable */ |
| #define SKIP_EO 0x00000400 /* PPI Skip Even/Odd Elements */ |
| #define DLENGTH 0x00003800 /* PPI Data Length */ |
| #define DLEN_8 0x0000 /* Data Length = 8 Bits */ |
| #define DLEN_10 0x0800 /* Data Length = 10 Bits */ |
| #define DLEN_11 0x1000 /* Data Length = 11 Bits */ |
| #define DLEN_12 0x1800 /* Data Length = 12 Bits */ |
| #define DLEN_13 0x2000 /* Data Length = 13 Bits */ |
| #define DLEN_14 0x2800 /* Data Length = 14 Bits */ |
| #define DLEN_15 0x3000 /* Data Length = 15 Bits */ |
| #define DLEN_16 0x3800 /* Data Length = 16 Bits */ |
| #define DLEN(x) (((x-9) & 0x07) << 11) /* PPI Data Length (only works for x=10-->x=16) */ |
| #define POL 0x0000C000 /* PPI Signal Polarities */ |
| #define POLC 0x4000 /* PPI Clock Polarity */ |
| #define POLS 0x8000 /* PPI Frame Sync Polarity */ |
| |
| /* PPI_STATUS Masks */ |
| #define FLD 0x00000400 /* Field Indicator */ |
| #define FT_ERR 0x00000800 /* Frame Track Error */ |
| #define OVR 0x00001000 /* FIFO Overflow Error */ |
| #define UNDR 0x00002000 /* FIFO Underrun Error */ |
| #define ERR_DET 0x00004000 /* Error Detected Indicator */ |
| #define ERR_NCOR 0x00008000 /* Error Not Corrected Indicator */ |
| |
| /* ********** DMA CONTROLLER MASKS *********************8 */ |
| |
| /*DMAx_CONFIG, MDMA_yy_CONFIG Masks */ |
| #define DMAEN 0x00000001 /* Channel Enable */ |
| #define WNR 0x00000002 /* Channel Direction (W/R*) */ |
| #define WDSIZE_8 0x00000000 /* Word Size 8 bits */ |
| #define WDSIZE_16 0x00000004 /* Word Size 16 bits */ |
| #define WDSIZE_32 0x00000008 /* Word Size 32 bits */ |
| #define DMA2D 0x00000010 /* 2D/1D* Mode */ |
| #define RESTART 0x00000020 /* Restart */ |
| #define DI_SEL 0x00000040 /* Data Interrupt Select */ |
| #define DI_EN 0x00000080 /* Data Interrupt Enable */ |
| #define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */ |
| #define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */ |
| #define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */ |
| #define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */ |
| #define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */ |
| #define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */ |
| #define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */ |
| #define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */ |
| #define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */ |
| #define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */ |
| #define NDSIZE 0x00000900 /* Next Descriptor Size */ |
| #define DMAFLOW 0x00007000 /* Flow Control */ |
| #define DMAFLOW_STOP 0x0000 /* Stop Mode */ |
| #define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */ |
| #define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */ |
| #define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */ |
| #define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */ |
| |
| #define DMAEN_P 0 /* Channel Enable */ |
| #define WNR_P 1 /* Channel Direction (W/R*) */ |
| #define DMA2D_P 4 /* 2D/1D* Mode */ |
| #define RESTART_P 5 /* Restart */ |
| #define DI_SEL_P 6 /* Data Interrupt Select */ |
| #define DI_EN_P 7 /* Data Interrupt Enable */ |
| |
| /*DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */ |
| |
| #define DMA_DONE 0x00000001 /* DMA Done Indicator */ |
| #define DMA_ERR 0x00000002 /* DMA Error Indicator */ |
| #define DFETCH 0x00000004 /* Descriptor Fetch Indicator */ |
| #define DMA_RUN 0x00000008 /* DMA Running Indicator */ |
| |
| #define DMA_DONE_P 0 /* DMA Done Indicator */ |
| #define DMA_ERR_P 1 /* DMA Error Indicator */ |
| #define DFETCH_P 2 /* Descriptor Fetch Indicator */ |
| #define DMA_RUN_P 3 /* DMA Running Indicator */ |
| |
| /*DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */ |
| |
| #define CTYPE 0x00000040 /* DMA Channel Type Indicator */ |
| #define CTYPE_P 6 /* DMA Channel Type Indicator BIT POSITION */ |
| #define PCAP8 0x00000080 /* DMA 8-bit Operation Indicator */ |
| #define PCAP16 0x00000100 /* DMA 16-bit Operation Indicator */ |
| #define PCAP32 0x00000200 /* DMA 32-bit Operation Indicator */ |
| #define PCAPWR 0x00000400 /* DMA Write Operation Indicator */ |
| #define PCAPRD 0x00000800 /* DMA Read Operation Indicator */ |
| #define PMAP 0x00007000 /* DMA Peripheral Map Field */ |
| |
| #define PMAP_PPI 0x0000 /* PMAP PPI Port DMA */ |
| #define PMAP_SPORT0RX 0x1000 /* PMAP SPORT0 Receive DMA */ |
| #define PMAP_SPORT0TX 0x2000 /* PMAP SPORT0 Transmit DMA */ |
| #define PMAP_SPORT1RX 0x3000 /* PMAP SPORT1 Receive DMA */ |
| #define PMAP_SPORT1TX 0x4000 /* PMAP SPORT1 Transmit DMA */ |
| #define PMAP_SPI 0x5000 /* PMAP SPI DMA */ |
| #define PMAP_UARTRX 0x6000 /* PMAP UART Receive DMA */ |
| #define PMAP_UARTTX 0x7000 /* PMAP UART Transmit DMA */ |
| |
| /* ************* GENERAL PURPOSE TIMER MASKS ******************** */ |
| |
| /* PWM Timer bit definitions */ |
| |
| /* TIMER_ENABLE Register */ |
| #define TIMEN0 0x0001 |
| #define TIMEN1 0x0002 |
| #define TIMEN2 0x0004 |
| |
| #define TIMEN0_P 0x00 |
| #define TIMEN1_P 0x01 |
| #define TIMEN2_P 0x02 |
| |
| /* TIMER_DISABLE Register */ |
| #define TIMDIS0 0x0001 |
| #define TIMDIS1 0x0002 |
| #define TIMDIS2 0x0004 |
| |
| #define TIMDIS0_P 0x00 |
| #define TIMDIS1_P 0x01 |
| #define TIMDIS2_P 0x02 |
| |
| /* TIMER_STATUS Register */ |
| #define TIMIL0 0x0001 |
| #define TIMIL1 0x0002 |
| #define TIMIL2 0x0004 |
| #define TOVF_ERR0 0x0010 /* Timer 0 Counter Overflow */ |
| #define TOVF_ERR1 0x0020 /* Timer 1 Counter Overflow */ |
| #define TOVF_ERR2 0x0040 /* Timer 2 Counter Overflow */ |
| #define TRUN0 0x1000 |
| #define TRUN1 0x2000 |
| #define TRUN2 0x4000 |
| |
| #define TIMIL0_P 0x00 |
| #define TIMIL1_P 0x01 |
| #define TIMIL2_P 0x02 |
| #define TOVF_ERR0_P 0x04 |
| #define TOVF_ERR1_P 0x05 |
| #define TOVF_ERR2_P 0x06 |
| #define TRUN0_P 0x0C |
| #define TRUN1_P 0x0D |
| #define TRUN2_P 0x0E |
| |
| /* Alternate Deprecated Macros Provided For Backwards Code Compatibility */ |
| #define TOVL_ERR0 TOVF_ERR0 |
| #define TOVL_ERR1 TOVF_ERR1 |
| #define TOVL_ERR2 TOVF_ERR2 |
| #define TOVL_ERR0_P TOVF_ERR0_P |
| #define TOVL_ERR1_P TOVF_ERR1_P |
| #define TOVL_ERR2_P TOVF_ERR2_P |
| |
| /* TIMERx_CONFIG Registers */ |
| #define PWM_OUT 0x0001 |
| #define WDTH_CAP 0x0002 |
| #define EXT_CLK 0x0003 |
| #define PULSE_HI 0x0004 |
| #define PERIOD_CNT 0x0008 |
| #define IRQ_ENA 0x0010 |
| #define TIN_SEL 0x0020 |
| #define OUT_DIS 0x0040 |
| #define CLK_SEL 0x0080 |
| #define TOGGLE_HI 0x0100 |
| #define EMU_RUN 0x0200 |
| #define ERR_TYP(x) ((x & 0x03) << 14) |
| |
| #define TMODE_P0 0x00 |
| #define TMODE_P1 0x01 |
| #define PULSE_HI_P 0x02 |
| #define PERIOD_CNT_P 0x03 |
| #define IRQ_ENA_P 0x04 |
| #define TIN_SEL_P 0x05 |
| #define OUT_DIS_P 0x06 |
| #define CLK_SEL_P 0x07 |
| #define TOGGLE_HI_P 0x08 |
| #define EMU_RUN_P 0x09 |
| #define ERR_TYP_P0 0x0E |
| #define ERR_TYP_P1 0x0F |
| |
| /*/ ****************** PROGRAMMABLE FLAG MASKS ********************* */ |
| |
| /* General Purpose IO (0xFFC00700 - 0xFFC007FF) Masks */ |
| #define PF0 0x0001 |
| #define PF1 0x0002 |
| #define PF2 0x0004 |
| #define PF3 0x0008 |
| #define PF4 0x0010 |
| #define PF5 0x0020 |
| #define PF6 0x0040 |
| #define PF7 0x0080 |
| #define PF8 0x0100 |
| #define PF9 0x0200 |
| #define PF10 0x0400 |
| #define PF11 0x0800 |
| #define PF12 0x1000 |
| #define PF13 0x2000 |
| #define PF14 0x4000 |
| #define PF15 0x8000 |
| |
| /* General Purpose IO (0xFFC00700 - 0xFFC007FF) BIT POSITIONS */ |
| #define PF0_P 0 |
| #define PF1_P 1 |
| #define PF2_P 2 |
| #define PF3_P 3 |
| #define PF4_P 4 |
| #define PF5_P 5 |
| #define PF6_P 6 |
| #define PF7_P 7 |
| #define PF8_P 8 |
| #define PF9_P 9 |
| #define PF10_P 10 |
| #define PF11_P 11 |
| #define PF12_P 12 |
| #define PF13_P 13 |
| #define PF14_P 14 |
| #define PF15_P 15 |
| |
| /* *********** SERIAL PERIPHERAL INTERFACE (SPI) MASKS **************** */ |
| |
| /* SPI_CTL Masks */ |
| #define TIMOD 0x00000003 /* Transfer initiation mode and interrupt generation */ |
| #define RDBR_CORE 0x0000 /* RDBR Read Initiates, IRQ When RDBR Full */ |
| #define TDBR_CORE 0x0001 /* TDBR Write Initiates, IRQ When TDBR Empty */ |
| #define RDBR_DMA 0x0002 /* DMA Read, DMA Until FIFO Empty */ |
| #define TDBR_DMA 0x0003 /* DMA Write, DMA Until FIFO Full */ |
| #define SZ 0x00000004 /* Send Zero (=0) or last (=1) word when TDBR empty. */ |
| #define GM 0x00000008 /* When RDBR full, get more (=1) data or discard (=0) incoming Data */ |
| #define PSSE 0x00000010 /* Enable (=1) Slave-Select input for Master. */ |
| #define EMISO 0x00000020 /* Enable (=1) MISO pin as an output. */ |
| #define SIZE 0x00000100 /* Word length (0 => 8 bits, 1 => 16 bits) */ |
| #define LSBF 0x00000200 /* Data format (0 => MSB sent/received first 1 => LSB sent/received first) */ |
| #define CPHA 0x00000400 /* Clock phase (0 => SPICLK starts toggling in middle of xfer, 1 => SPICLK toggles at the beginning of xfer. */ |
| #define CPOL 0x00000800 /* Clock polarity (0 => active-high, 1 => active-low) */ |
| #define MSTR 0x00001000 /* Configures SPI as master (=1) or slave (=0) */ |
| #define WOM 0x00002000 /* Open drain (=1) data output enable (for MOSI and MISO) */ |
| #define SPE 0x00004000 /* SPI module enable (=1), disable (=0) */ |
| |
| /* SPI_FLG Masks */ |
| #define FLS1 0x00000002 /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */ |
| #define FLS2 0x00000004 /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */ |
| #define FLS3 0x00000008 /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */ |
| #define FLS4 0x00000010 /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */ |
| #define FLS5 0x00000020 /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */ |
| #define FLS6 0x00000040 /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */ |
| #define FLS7 0x00000080 /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */ |
| #define FLG1 0x00000200 /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */ |
| #define FLG2 0x00000400 /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */ |
| #define FLG3 0x00000800 /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */ |
| #define FLG4 0x00001000 /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */ |
| #define FLG5 0x00002000 /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */ |
| #define FLG6 0x00004000 /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */ |
| #define FLG7 0x00008000 /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */ |
| |
| /* SPI_FLG Bit Positions */ |
| #define FLS1_P 0x00000001 /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */ |
| #define FLS2_P 0x00000002 /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */ |
| #define FLS3_P 0x00000003 /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */ |
| #define FLS4_P 0x00000004 /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */ |
| #define FLS5_P 0x00000005 /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */ |
| #define FLS6_P 0x00000006 /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */ |
| #define FLS7_P 0x00000007 /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */ |
| #define FLG1_P 0x00000009 /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */ |
| #define FLG2_P 0x0000000A /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */ |
| #define FLG3_P 0x0000000B /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */ |
| #define FLG4_P 0x0000000C /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */ |
| #define FLG5_P 0x0000000D /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */ |
| #define FLG6_P 0x0000000E /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */ |
| #define FLG7_P 0x0000000F /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */ |
| |
| /* SPI_STAT Masks */ |
| #define SPIF 0x00000001 /* Set (=1) when SPI single-word transfer complete */ |
| #define MODF 0x00000002 /* Set (=1) in a master device when some other device tries to become master */ |
| #define TXE 0x00000004 /* Set (=1) when transmission occurs with no new data in SPI_TDBR */ |
| #define TXS 0x00000008 /* SPI_TDBR Data Buffer Status (0=Empty, 1=Full) */ |
| #define RBSY 0x00000010 /* Set (=1) when data is received with RDBR full */ |
| #define RXS 0x00000020 /* SPI_RDBR Data Buffer Status (0=Empty, 1=Full) */ |
| #define TXCOL 0x00000040 /* When set (=1), corrupt data may have been transmitted */ |
| |
| /* SPIx_FLG Masks */ |
| #define FLG1E 0xFDFF /* Activates SPI_FLOUT1 */ |
| #define FLG2E 0xFBFF /* Activates SPI_FLOUT2 */ |
| #define FLG3E 0xF7FF /* Activates SPI_FLOUT3 */ |
| #define FLG4E 0xEFFF /* Activates SPI_FLOUT4 */ |
| #define FLG5E 0xDFFF /* Activates SPI_FLOUT5 */ |
| #define FLG6E 0xBFFF /* Activates SPI_FLOUT6 */ |
| #define FLG7E 0x7FFF /* Activates SPI_FLOUT7 */ |
| |
| /* ********************* ASYNCHRONOUS MEMORY CONTROLLER MASKS ************* */ |
| |
| /* AMGCTL Masks */ |
| #define AMCKEN 0x00000001 /* Enable CLKOUT */ |
| #define AMBEN_NONE 0x00000000 /* All Banks Disabled */ |
| #define AMBEN_B0 0x00000002 /* Enable Asynchronous Memory Bank 0 only */ |
| #define AMBEN_B0_B1 0x00000004 /* Enable Asynchronous Memory Banks 0 & 1 only */ |
| #define AMBEN_B0_B1_B2 0x00000006 /* Enable Asynchronous Memory Banks 0, 1, and 2 */ |
| #define AMBEN_ALL 0x00000008 /* Enable Asynchronous Memory Banks (all) 0, 1, 2, and 3 */ |
| |
| /* AMGCTL Bit Positions */ |
| #define AMCKEN_P 0x00000000 /* Enable CLKOUT */ |
| #define AMBEN_P0 0x00000001 /* Asynchronous Memory Enable, 000 - banks 0-3 disabled, 001 - Bank 0 enabled */ |
| #define AMBEN_P1 0x00000002 /* Asynchronous Memory Enable, 010 - banks 0&1 enabled, 011 - banks 0-3 enabled */ |
| #define AMBEN_P2 0x00000003 /* Asynchronous Memory Enable, 1xx - All banks (bank 0, 1, 2, and 3) enabled */ |
| |
| /* AMBCTL0 Masks */ |
| #define B0RDYEN 0x00000001 /* Bank 0 RDY Enable, 0=disable, 1=enable */ |
| #define B0RDYPOL 0x00000002 /* Bank 0 RDY Active high, 0=active low, 1=active high */ |
| #define B0TT_1 0x00000004 /* Bank 0 Transition Time from Read to Write = 1 cycle */ |
| #define B0TT_2 0x00000008 /* Bank 0 Transition Time from Read to Write = 2 cycles */ |
| #define B0TT_3 0x0000000C /* Bank 0 Transition Time from Read to Write = 3 cycles */ |
| #define B0TT_4 0x00000000 /* Bank 0 Transition Time from Read to Write = 4 cycles */ |
| #define B0ST_1 0x00000010 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=1 cycle */ |
| #define B0ST_2 0x00000020 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=2 cycles */ |
| #define B0ST_3 0x00000030 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=3 cycles */ |
| #define B0ST_4 0x00000000 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=4 cycles */ |
| #define B0HT_1 0x00000040 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 1 cycle */ |
| #define B0HT_2 0x00000080 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 2 cycles */ |
| #define B0HT_3 0x000000C0 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 3 cycles */ |
| #define B0HT_0 0x00000000 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 0 cycles */ |
| #define B0RAT_1 0x00000100 /* Bank 0 Read Access Time = 1 cycle */ |
| #define B0RAT_2 0x00000200 /* Bank 0 Read Access Time = 2 cycles */ |
| #define B0RAT_3 0x00000300 /* Bank 0 Read Access Time = 3 cycles */ |
| #define B0RAT_4 0x00000400 /* Bank 0 Read Access Time = 4 cycles */ |
| #define B0RAT_5 0x00000500 /* Bank 0 Read Access Time = 5 cycles */ |
| #define B0RAT_6 0x00000600 /* Bank 0 Read Access Time = 6 cycles */ |
| #define B0RAT_7 0x00000700 /* Bank 0 Read Access Time = 7 cycles */ |
| #define B0RAT_8 0x00000800 /* Bank 0 Read Access Time = 8 cycles */ |
| #define B0RAT_9 0x00000900 /* Bank 0 Read Access Time = 9 cycles */ |
| #define B0RAT_10 0x00000A00 /* Bank 0 Read Access Time = 10 cycles */ |
| #define B0RAT_11 0x00000B00 /* Bank 0 Read Access Time = 11 cycles */ |
| #define B0RAT_12 0x00000C00 /* Bank 0 Read Access Time = 12 cycles */ |
| #define B0RAT_13 0x00000D00 /* Bank 0 Read Access Time = 13 cycles */ |
| #define B0RAT_14 0x00000E00 /* Bank 0 Read Access Time = 14 cycles */ |
| #define B0RAT_15 0x00000F00 /* Bank 0 Read Access Time = 15 cycles */ |
| #define B0WAT_1 0x00001000 /* Bank 0 Write Access Time = 1 cycle */ |
| #define B0WAT_2 0x00002000 /* Bank 0 Write Access Time = 2 cycles */ |
| #define B0WAT_3 0x00003000 /* Bank 0 Write Access Time = 3 cycles */ |
| #define B0WAT_4 0x00004000 /* Bank 0 Write Access Time = 4 cycles */ |
| #define B0WAT_5 0x00005000 /* Bank 0 Write Access Time = 5 cycles */ |
| #define B0WAT_6 0x00006000 /* Bank 0 Write Access Time = 6 cycles */ |
| #define B0WAT_7 0x00007000 /* Bank 0 Write Access Time = 7 cycles */ |
| #define B0WAT_8 0x00008000 /* Bank 0 Write Access Time = 8 cycles */ |
| #define B0WAT_9 0x00009000 /* Bank 0 Write Access Time = 9 cycles */ |
| #define B0WAT_10 0x0000A000 /* Bank 0 Write Access Time = 10 cycles */ |
| #define B0WAT_11 0x0000B000 /* Bank 0 Write Access Time = 11 cycles */ |
| #define B0WAT_12 0x0000C000 /* Bank 0 Write Access Time = 12 cycles */ |
| #define B0WAT_13 0x0000D000 /* Bank 0 Write Access Time = 13 cycles */ |
| #define B0WAT_14 0x0000E000 /* Bank 0 Write Access Time = 14 cycles */ |
| #define B0WAT_15 0x0000F000 /* Bank 0 Write Access Time = 15 cycles */ |
| #define B1RDYEN 0x00010000 /* Bank 1 RDY enable, 0=disable, 1=enable */ |
| #define B1RDYPOL 0x00020000 /* Bank 1 RDY Active high, 0=active low, 1=active high */ |
| #define B1TT_1 0x00040000 /* Bank 1 Transition Time from Read to Write = 1 cycle */ |
| #define B1TT_2 0x00080000 /* Bank 1 Transition Time from Read to Write = 2 cycles */ |
| #define B1TT_3 0x000C0000 /* Bank 1 Transition Time from Read to Write = 3 cycles */ |
| #define B1TT_4 0x00000000 /* Bank 1 Transition Time from Read to Write = 4 cycles */ |
| #define B1ST_1 0x00100000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */ |
| #define B1ST_2 0x00200000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */ |
| #define B1ST_3 0x00300000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */ |
| #define B1ST_4 0x00000000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */ |
| #define B1HT_1 0x00400000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */ |
| #define B1HT_2 0x00800000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */ |
| #define B1HT_3 0x00C00000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */ |
| #define B1HT_0 0x00000000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */ |
| #define B1RAT_1 0x01000000 /* Bank 1 Read Access Time = 1 cycle */ |
| #define B1RAT_2 0x02000000 /* Bank 1 Read Access Time = 2 cycles */ |
| #define B1RAT_3 0x03000000 /* Bank 1 Read Access Time = 3 cycles */ |
| #define B1RAT_4 0x04000000 /* Bank 1 Read Access Time = 4 cycles */ |
| #define B1RAT_5 0x05000000 /* Bank 1 Read Access Time = 5 cycles */ |
| #define B1RAT_6 0x06000000 /* Bank 1 Read Access Time = 6 cycles */ |
| #define B1RAT_7 0x07000000 /* Bank 1 Read Access Time = 7 cycles */ |
| #define B1RAT_8 0x08000000 /* Bank 1 Read Access Time = 8 cycles */ |
| #define B1RAT_9 0x09000000 /* Bank 1 Read Access Time = 9 cycles */ |
| #define B1RAT_10 0x0A000000 /* Bank 1 Read Access Time = 10 cycles */ |
| #define B1RAT_11 0x0B000000 /* Bank 1 Read Access Time = 11 cycles */ |
| #define B1RAT_12 0x0C000000 /* Bank 1 Read Access Time = 12 cycles */ |
| #define B1RAT_13 0x0D000000 /* Bank 1 Read Access Time = 13 cycles */ |
| #define B1RAT_14 0x0E000000 /* Bank 1 Read Access Time = 14 cycles */ |
| #define B1RAT_15 0x0F000000 /* Bank 1 Read Access Time = 15 cycles */ |
| #define B1WAT_1 0x10000000 /* Bank 1 Write Access Time = 1 cycle */ |
| #define B1WAT_2 0x20000000 /* Bank 1 Write Access Time = 2 cycles */ |
| #define B1WAT_3 0x30000000 /* Bank 1 Write Access Time = 3 cycles */ |
| #define B1WAT_4 0x40000000 /* Bank 1 Write Access Time = 4 cycles */ |
| #define B1WAT_5 0x50000000 /* Bank 1 Write Access Time = 5 cycles */ |
| #define B1WAT_6 0x60000000 /* Bank 1 Write Access Time = 6 cycles */ |
| #define B1WAT_7 0x70000000 /* Bank 1 Write Access Time = 7 cycles */ |
| #define B1WAT_8 0x80000000 /* Bank 1 Write Access Time = 8 cycles */ |
| #define B1WAT_9 0x90000000 /* Bank 1 Write Access Time = 9 cycles */ |
| #define B1WAT_10 0xA0000000 /* Bank 1 Write Access Time = 10 cycles */ |
| #define B1WAT_11 0xB0000000 /* Bank 1 Write Access Time = 11 cycles */ |
| #define B1WAT_12 0xC0000000 /* Bank 1 Write Access Time = 12 cycles */ |
| #define B1WAT_13 0xD0000000 /* Bank 1 Write Access Time = 13 cycles */ |
| #define B1WAT_14 0xE0000000 /* Bank 1 Write Access Time = 14 cycles */ |
| #define B1WAT_15 0xF0000000 /* Bank 1 Write Access Time = 15 cycles */ |
| |
| /* AMBCTL1 Masks */ |
| #define B2RDYEN 0x00000001 /* Bank 2 RDY Enable, 0=disable, 1=enable */ |
| #define B2RDYPOL 0x00000002 /* Bank 2 RDY Active high, 0=active low, 1=active high */ |
| #define B2TT_1 0x00000004 /* Bank 2 Transition Time from Read to Write = 1 cycle */ |
| #define B2TT_2 0x00000008 /* Bank 2 Transition Time from Read to Write = 2 cycles */ |
| #define B2TT_3 0x0000000C /* Bank 2 Transition Time from Read to Write = 3 cycles */ |
| #define B2TT_4 0x00000000 /* Bank 2 Transition Time from Read to Write = 4 cycles */ |
| #define B2ST_1 0x00000010 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */ |
| #define B2ST_2 0x00000020 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */ |
| #define B2ST_3 0x00000030 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */ |
| #define B2ST_4 0x00000000 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */ |
| #define B2HT_1 0x00000040 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */ |
| #define B2HT_2 0x00000080 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */ |
| #define B2HT_3 0x000000C0 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */ |
| #define B2HT_0 0x00000000 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */ |
| #define B2RAT_1 0x00000100 /* Bank 2 Read Access Time = 1 cycle */ |
| #define B2RAT_2 0x00000200 /* Bank 2 Read Access Time = 2 cycles */ |
| #define B2RAT_3 0x00000300 /* Bank 2 Read Access Time = 3 cycles */ |
| #define B2RAT_4 0x00000400 /* Bank 2 Read Access Time = 4 cycles */ |
| #define B2RAT_5 0x00000500 /* Bank 2 Read Access Time = 5 cycles */ |
| #define B2RAT_6 0x00000600 /* Bank 2 Read Access Time = 6 cycles */ |
| #define B2RAT_7 0x00000700 /* Bank 2 Read Access Time = 7 cycles */ |
| #define B2RAT_8 0x00000800 /* Bank 2 Read Access Time = 8 cycles */ |
| #define B2RAT_9 0x00000900 /* Bank 2 Read Access Time = 9 cycles */ |
| #define B2RAT_10 0x00000A00 /* Bank 2 Read Access Time = 10 cycles */ |
| #define B2RAT_11 0x00000B00 /* Bank 2 Read Access Time = 11 cycles */ |
| #define B2RAT_12 0x00000C00 /* Bank 2 Read Access Time = 12 cycles */ |
| #define B2RAT_13 0x00000D00 /* Bank 2 Read Access Time = 13 cycles */ |
| #define B2RAT_14 0x00000E00 /* Bank 2 Read Access Time = 14 cycles */ |
| #define B2RAT_15 0x00000F00 /* Bank 2 Read Access Time = 15 cycles */ |
| #define B2WAT_1 0x00001000 /* Bank 2 Write Access Time = 1 cycle */ |
| #define B2WAT_2 0x00002000 /* Bank 2 Write Access Time = 2 cycles */ |
| #define B2WAT_3 0x00003000 /* Bank 2 Write Access Time = 3 cycles */ |
| #define B2WAT_4 0x00004000 /* Bank 2 Write Access Time = 4 cycles */ |
| #define B2WAT_5 0x00005000 /* Bank 2 Write Access Time = 5 cycles */ |
| #define B2WAT_6 0x00006000 /* Bank 2 Write Access Time = 6 cycles */ |
| #define B2WAT_7 0x00007000 /* Bank 2 Write Access Time = 7 cycles */ |
| #define B2WAT_8 0x00008000 /* Bank 2 Write Access Time = 8 cycles */ |
| #define B2WAT_9 0x00009000 /* Bank 2 Write Access Time = 9 cycles */ |
| #define B2WAT_10 0x0000A000 /* Bank 2 Write Access Time = 10 cycles */ |
| #define B2WAT_11 0x0000B000 /* Bank 2 Write Access Time = 11 cycles */ |
| #define B2WAT_12 0x0000C000 /* Bank 2 Write Access Time = 12 cycles */ |
| #define B2WAT_13 0x0000D000 /* Bank 2 Write Access Time = 13 cycles */ |
| #define B2WAT_14 0x0000E000 /* Bank 2 Write Access Time = 14 cycles */ |
| #define B2WAT_15 0x0000F000 /* Bank 2 Write Access Time = 15 cycles */ |
| #define B3RDYEN 0x00010000 /* Bank 3 RDY enable, 0=disable, 1=enable */ |
| #define B3RDYPOL 0x00020000 /* Bank 3 RDY Active high, 0=active low, 1=active high */ |
| #define B3TT_1 0x00040000 /* Bank 3 Transition Time from Read to Write = 1 cycle */ |
| #define B3TT_2 0x00080000 /* Bank 3 Transition Time from Read to Write = 2 cycles */ |
| #define B3TT_3 0x000C0000 /* Bank 3 Transition Time from Read to Write = 3 cycles */ |
| #define B3TT_4 0x00000000 /* Bank 3 Transition Time from Read to Write = 4 cycles */ |
| #define B3ST_1 0x00100000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */ |
| #define B3ST_2 0x00200000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */ |
| #define B3ST_3 0x00300000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */ |
| #define B3ST_4 0x00000000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */ |
| #define B3HT_1 0x00400000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */ |
| #define B3HT_2 0x00800000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */ |
| #define B3HT_3 0x00C00000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */ |
| #define B3HT_0 0x00000000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */ |
| #define B3RAT_1 0x01000000 /* Bank 3 Read Access Time = 1 cycle */ |
| #define B3RAT_2 0x02000000 /* Bank 3 Read Access Time = 2 cycles */ |
| #define B3RAT_3 0x03000000 /* Bank 3 Read Access Time = 3 cycles */ |
| #define B3RAT_4 0x04000000 /* Bank 3 Read Access Time = 4 cycles */ |
| #define B3RAT_5 0x05000000 /* Bank 3 Read Access Time = 5 cycles */ |
| #define B3RAT_6 0x06000000 /* Bank 3 Read Access Time = 6 cycles */ |
| #define B3RAT_7 0x07000000 /* Bank 3 Read Access Time = 7 cycles */ |
| #define B3RAT_8 0x08000000 /* Bank 3 Read Access Time = 8 cycles */ |
| #define B3RAT_9 0x09000000 /* Bank 3 Read Access Time = 9 cycles */ |
| #define B3RAT_10 0x0A000000 /* Bank 3 Read Access Time = 10 cycles */ |
| #define B3RAT_11 0x0B000000 /* Bank 3 Read Access Time = 11 cycles */ |
| #define B3RAT_12 0x0C000000 /* Bank 3 Read Access Time = 12 cycles */ |
| #define B3RAT_13 0x0D000000 /* Bank 3 Read Access Time = 13 cycles */ |
| #define B3RAT_14 0x0E000000 /* Bank 3 Read Access Time = 14 cycles */ |
| #define B3RAT_15 0x0F000000 /* Bank 3 Read Access Time = 15 cycles */ |
| #define B3WAT_1 0x10000000 /* Bank 3 Write Access Time = 1 cycle */ |
| #define B3WAT_2 0x20000000 /* Bank 3 Write Access Time = 2 cycles */ |
| #define B3WAT_3 0x30000000 /* Bank 3 Write Access Time = 3 cycles */ |
| #define B3WAT_4 0x40000000 /* Bank 3 Write Access Time = 4 cycles */ |
| #define B3WAT_5 0x50000000 /* Bank 3 Write Access Time = 5 cycles */ |
| #define B3WAT_6 0x60000000 /* Bank 3 Write Access Time = 6 cycles */ |
| #define B3WAT_7 0x70000000 /* Bank 3 Write Access Time = 7 cycles */ |
| #define B3WAT_8 0x80000000 /* Bank 3 Write Access Time = 8 cycles */ |
| #define B3WAT_9 0x90000000 /* Bank 3 Write Access Time = 9 cycles */ |
| #define B3WAT_10 0xA0000000 /* Bank 3 Write Access Time = 10 cycles */ |
| #define B3WAT_11 0xB0000000 /* Bank 3 Write Access Time = 11 cycles */ |
| #define B3WAT_12 0xC0000000 /* Bank 3 Write Access Time = 12 cycles */ |
| #define B3WAT_13 0xD0000000 /* Bank 3 Write Access Time = 13 cycles */ |
| #define B3WAT_14 0xE0000000 /* Bank 3 Write Access Time = 14 cycles */ |
| #define B3WAT_15 0xF0000000 /* Bank 3 Write Access Time = 15 cycles */ |
| |
| /* ********************** SDRAM CONTROLLER MASKS *************************** */ |
| |
| /* SDGCTL Masks */ |
| #define SCTLE 0x00000001 /* Enable SCLK[0], /SRAS, /SCAS, /SWE, SDQM[3:0] */ |
| #define CL_2 0x00000008 /* SDRAM CAS latency = 2 cycles */ |
| #define CL_3 0x0000000C /* SDRAM CAS latency = 3 cycles */ |
| #define PFE 0x00000010 /* Enable SDRAM prefetch */ |
| #define PFP 0x00000020 /* Prefetch has priority over AMC requests */ |
| #define PASR_ALL 0x00000000 /* All 4 SDRAM Banks Refreshed In Self-Refresh */ |
| #define PASR_B0_B1 0x00000010 /* SDRAM Banks 0 and 1 Are Refreshed In Self-Refresh */ |
| #define PASR_B0 0x00000020 /* Only SDRAM Bank 0 Is Refreshed In Self-Refresh */ |
| #define TRAS_1 0x00000040 /* SDRAM tRAS = 1 cycle */ |
| #define TRAS_2 0x00000080 /* SDRAM tRAS = 2 cycles */ |
| #define TRAS_3 0x000000C0 /* SDRAM tRAS = 3 cycles */ |
| #define TRAS_4 0x00000100 /* SDRAM tRAS = 4 cycles */ |
| #define TRAS_5 0x00000140 /* SDRAM tRAS = 5 cycles */ |
| #define TRAS_6 0x00000180 /* SDRAM tRAS = 6 cycles */ |
| #define TRAS_7 0x000001C0 /* SDRAM tRAS = 7 cycles */ |
| #define TRAS_8 0x00000200 /* SDRAM tRAS = 8 cycles */ |
| #define TRAS_9 0x00000240 /* SDRAM tRAS = 9 cycles */ |
| #define TRAS_10 0x00000280 /* SDRAM tRAS = 10 cycles */ |
| #define TRAS_11 0x000002C0 /* SDRAM tRAS = 11 cycles */ |
| #define TRAS_12 0x00000300 /* SDRAM tRAS = 12 cycles */ |
| #define TRAS_13 0x00000340 /* SDRAM tRAS = 13 cycles */ |
| #define TRAS_14 0x00000380 /* SDRAM tRAS = 14 cycles */ |
| #define TRAS_15 0x000003C0 /* SDRAM tRAS = 15 cycles */ |
| #define TRP_1 0x00000800 /* SDRAM tRP = 1 cycle */ |
| #define TRP_2 0x00001000 /* SDRAM tRP = 2 cycles */ |
| #define TRP_3 0x00001800 /* SDRAM tRP = 3 cycles */ |
| #define TRP_4 0x00002000 /* SDRAM tRP = 4 cycles */ |
| #define TRP_5 0x00002800 /* SDRAM tRP = 5 cycles */ |
| #define TRP_6 0x00003000 /* SDRAM tRP = 6 cycles */ |
| #define TRP_7 0x00003800 /* SDRAM tRP = 7 cycles */ |
| #define TRCD_1 0x00008000 /* SDRAM tRCD = 1 cycle */ |
| #define TRCD_2 0x00010000 /* SDRAM tRCD = 2 cycles */ |
| #define TRCD_3 0x00018000 /* SDRAM tRCD = 3 cycles */ |
| #define TRCD_4 0x00020000 /* SDRAM tRCD = 4 cycles */ |
| #define TRCD_5 0x00028000 /* SDRAM tRCD = 5 cycles */ |
| #define TRCD_6 0x00030000 /* SDRAM tRCD = 6 cycles */ |
| #define TRCD_7 0x00038000 /* SDRAM tRCD = 7 cycles */ |
| #define TWR_1 0x00080000 /* SDRAM tWR = 1 cycle */ |
| #define TWR_2 0x00100000 /* SDRAM tWR = 2 cycles */ |
| #define TWR_3 0x00180000 /* SDRAM tWR = 3 cycles */ |
| #define PUPSD 0x00200000 /*Power-up start delay */ |
| #define PSM 0x00400000 /* SDRAM power-up sequence = Precharge, mode register set, 8 CBR refresh cycles */ |
| #define PSS 0x00800000 /* enable SDRAM power-up sequence on next SDRAM access */ |
| #define SRFS 0x01000000 /* Start SDRAM self-refresh mode */ |
| #define EBUFE 0x02000000 /* Enable external buffering timing */ |
| #define FBBRW 0x04000000 /* Fast back-to-back read write enable */ |
| #define EMREN 0x10000000 /* Extended mode register enable */ |
| #define TCSR 0x20000000 /* Temp compensated self refresh value 85 deg C */ |
| #define CDDBG 0x40000000 /* Tristate SDRAM controls during bus grant */ |
| |
| /* EBIU_SDBCTL Masks */ |
| #define EBE 0x00000001 /* Enable SDRAM external bank */ |
| #define EBSZ_16 0x00000000 /* SDRAM external bank size = 16MB */ |
| #define EBSZ_32 0x00000002 /* SDRAM external bank size = 32MB */ |
| #define EBSZ_64 0x00000004 /* SDRAM external bank size = 64MB */ |
| #define EBSZ_128 0x00000006 /* SDRAM external bank size = 128MB */ |
| #define EBCAW_8 0x00000000 /* SDRAM external bank column address width = 8 bits */ |
| #define EBCAW_9 0x00000010 /* SDRAM external bank column address width = 9 bits */ |
| #define EBCAW_10 0x00000020 /* SDRAM external bank column address width = 9 bits */ |
| #define EBCAW_11 0x00000030 /* SDRAM external bank column address width = 9 bits */ |
| |
| /* EBIU_SDSTAT Masks */ |
| #define SDCI 0x00000001 /* SDRAM controller is idle */ |
| #define SDSRA 0x00000002 /* SDRAM SDRAM self refresh is active */ |
| #define SDPUA 0x00000004 /* SDRAM power up active */ |
| #define SDRS 0x00000008 /* SDRAM is in reset state */ |
| #define SDEASE 0x00000010 /* SDRAM EAB sticky error status - W1C */ |
| #define BGSTAT 0x00000020 /* Bus granted */ |
| |
| |
| #endif /* _DEF_BF532_H */ |
