/*
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file "COPYING" in the main directory of this archive
 * for more details.
 *
 * Copyright (C) 1992 Ross Biro
 * Copyright (C) Linus Torvalds
 * Copyright (C) 1994, 95, 96, 97, 98, 2000 Ralf Baechle
 * Copyright (C) 1996 David S. Miller
 * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
 * Copyright (C) 1999 MIPS Technologies, Inc.
 * Copyright (C) 2000 Ulf Carlsson
 *
 * At this time Linux/MIPS64 only supports syscall tracing, even for 32-bit
 * binaries.
 */
#include <linux/config.h>
#include <linux/compiler.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/errno.h>
#include <linux/ptrace.h>
#include <linux/audit.h>
#include <linux/smp.h>
#include <linux/smp_lock.h>
#include <linux/user.h>
#include <linux/security.h>
#include <linux/signal.h>

#include <asm/cpu.h>
#include <asm/fpu.h>
#include <asm/mipsregs.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/bootinfo.h>

/*
 * Called by kernel/ptrace.c when detaching..
 *
 * Make sure single step bits etc are not set.
 */
void ptrace_disable(struct task_struct *child)
{
	/* Nothing to do.. */
}

asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
{
	struct task_struct *child;
	int ret;

#if 0
	printk("ptrace(r=%d,pid=%d,addr=%08lx,data=%08lx)\n",
	       (int) request, (int) pid, (unsigned long) addr,
	       (unsigned long) data);
#endif
	lock_kernel();
	ret = -EPERM;
	if (request == PTRACE_TRACEME) {
		/* are we already being traced? */
		if (current->ptrace & PT_PTRACED)
			goto out;
		if ((ret = security_ptrace(current->parent, current)))
			goto out;
		/* set the ptrace bit in the process flags. */
		current->ptrace |= PT_PTRACED;
		ret = 0;
		goto out;
	}
	ret = -ESRCH;
	read_lock(&tasklist_lock);
	child = find_task_by_pid(pid);
	if (child)
		get_task_struct(child);
	read_unlock(&tasklist_lock);
	if (!child)
		goto out;

	ret = -EPERM;
	if (pid == 1)		/* you may not mess with init */
		goto out_tsk;

	if (request == PTRACE_ATTACH) {
		ret = ptrace_attach(child);
		goto out_tsk;
	}

	ret = ptrace_check_attach(child, request == PTRACE_KILL);
	if (ret < 0)
		goto out_tsk;

	switch (request) {
	/* when I and D space are separate, these will need to be fixed. */
	case PTRACE_PEEKTEXT: /* read word at location addr. */
	case PTRACE_PEEKDATA: {
		unsigned long tmp;
		int copied;

		copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
		ret = -EIO;
		if (copied != sizeof(tmp))
			break;
		ret = put_user(tmp,(unsigned long *) data);
		break;
	}

	/* Read the word at location addr in the USER area. */
	case PTRACE_PEEKUSR: {
		struct pt_regs *regs;
		unsigned long tmp = 0;

		regs = (struct pt_regs *) ((unsigned long) child->thread_info +
		       THREAD_SIZE - 32 - sizeof(struct pt_regs));
		ret = 0;  /* Default return value. */

		switch (addr) {
		case 0 ... 31:
			tmp = regs->regs[addr];
			break;
		case FPR_BASE ... FPR_BASE + 31:
			if (tsk_used_math(child)) {
				fpureg_t *fregs = get_fpu_regs(child);

#ifdef CONFIG_MIPS32
				/*
				 * The odd registers are actually the high
				 * order bits of the values stored in the even
				 * registers - unless we're using r2k_switch.S.
				 */
				if (addr & 1)
					tmp = (unsigned long) (fregs[((addr & ~1) - 32)] >> 32);
				else
					tmp = (unsigned long) (fregs[(addr - 32)] & 0xffffffff);
#endif
#ifdef CONFIG_MIPS64
				tmp = fregs[addr - FPR_BASE];
#endif
			} else {
				tmp = -1;	/* FP not yet used  */
			}
			break;
		case PC:
			tmp = regs->cp0_epc;
			break;
		case CAUSE:
			tmp = regs->cp0_cause;
			break;
		case BADVADDR:
			tmp = regs->cp0_badvaddr;
			break;
		case MMHI:
			tmp = regs->hi;
			break;
		case MMLO:
			tmp = regs->lo;
			break;
		case FPC_CSR:
			if (cpu_has_fpu)
				tmp = child->thread.fpu.hard.fcr31;
			else
				tmp = child->thread.fpu.soft.fcr31;
			break;
		case FPC_EIR: {	/* implementation / version register */
			unsigned int flags;

			if (!cpu_has_fpu)
				break;

			flags = read_c0_status();
			__enable_fpu();
			__asm__ __volatile__("cfc1\t%0,$0": "=r" (tmp));
			write_c0_status(flags);
			break;
		}
		default:
			tmp = 0;
			ret = -EIO;
			goto out_tsk;
		}
		ret = put_user(tmp, (unsigned long *) data);
		break;
	}

	/* when I and D space are separate, this will have to be fixed. */
	case PTRACE_POKETEXT: /* write the word at location addr. */
	case PTRACE_POKEDATA:
		ret = 0;
		if (access_process_vm(child, addr, &data, sizeof(data), 1)
		    == sizeof(data))
			break;
		ret = -EIO;
		break;

	case PTRACE_POKEUSR: {
		struct pt_regs *regs;
		ret = 0;
		regs = (struct pt_regs *) ((unsigned long) child->thread_info +
		       THREAD_SIZE - 32 - sizeof(struct pt_regs));

		switch (addr) {
		case 0 ... 31:
			regs->regs[addr] = data;
			break;
		case FPR_BASE ... FPR_BASE + 31: {
			fpureg_t *fregs = get_fpu_regs(child);

			if (!tsk_used_math(child)) {
				/* FP not yet used  */
				memset(&child->thread.fpu.hard, ~0,
				       sizeof(child->thread.fpu.hard));
				child->thread.fpu.hard.fcr31 = 0;
			}
#ifdef CONFIG_MIPS32
			/*
			 * The odd registers are actually the high order bits
			 * of the values stored in the even registers - unless
			 * we're using r2k_switch.S.
			 */
			if (addr & 1) {
				fregs[(addr & ~1) - FPR_BASE] &= 0xffffffff;
				fregs[(addr & ~1) - FPR_BASE] |= ((unsigned long long) data) << 32;
			} else {
				fregs[addr - FPR_BASE] &= ~0xffffffffLL;
				fregs[addr - FPR_BASE] |= data;
			}
#endif
#ifdef CONFIG_MIPS64
			fregs[addr - FPR_BASE] = data;
#endif
			break;
		}
		case PC:
			regs->cp0_epc = data;
			break;
		case MMHI:
			regs->hi = data;
			break;
		case MMLO:
			regs->lo = data;
			break;
		case FPC_CSR:
			if (cpu_has_fpu)
				child->thread.fpu.hard.fcr31 = data;
			else
				child->thread.fpu.soft.fcr31 = data;
			break;
		default:
			/* The rest are not allowed. */
			ret = -EIO;
			break;
		}
		break;
		}

	case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
	case PTRACE_CONT: { /* restart after signal. */
		ret = -EIO;
		if (!valid_signal(data))
			break;
		if (request == PTRACE_SYSCALL) {
			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
		}
		else {
			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
		}
		child->exit_code = data;
		wake_up_process(child);
		ret = 0;
		break;
	}

	/*
	 * make the child exit.  Best I can do is send it a sigkill.
	 * perhaps it should be put in the status that it wants to
	 * exit.
	 */
	case PTRACE_KILL:
		ret = 0;
		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
			break;
		child->exit_code = SIGKILL;
		wake_up_process(child);
		break;

	case PTRACE_DETACH: /* detach a process that was attached. */
		ret = ptrace_detach(child, data);
		break;

	default:
		ret = ptrace_request(child, request, addr, data);
		break;
	}

out_tsk:
	put_task_struct(child);
out:
	unlock_kernel();
	return ret;
}

static inline int audit_arch(void)
{
#ifdef CONFIG_CPU_LITTLE_ENDIAN
#ifdef CONFIG_MIPS64
	if (!(current->thread.mflags & MF_32BIT_REGS))
		return AUDIT_ARCH_MIPSEL64;
#endif /* MIPS64 */
	return AUDIT_ARCH_MIPSEL;

#else /* big endian... */
#ifdef CONFIG_MIPS64
	if (!(current->thread.mflags & MF_32BIT_REGS))
		return AUDIT_ARCH_MIPS64;
#endif /* MIPS64 */
	return AUDIT_ARCH_MIPS;

#endif /* endian */
}

/*
 * Notification of system call entry/exit
 * - triggered by current->work.syscall_trace
 */
asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit)
{
	if (unlikely(current->audit_context) && entryexit)
		audit_syscall_exit(current, AUDITSC_RESULT(regs->regs[2]), regs->regs[2]);

	if (!test_thread_flag(TIF_SYSCALL_TRACE))
		goto out;
	if (!(current->ptrace & PT_PTRACED))
		goto out;

	/* The 0x80 provides a way for the tracing parent to distinguish
	   between a syscall stop and SIGTRAP delivery */
	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) ?
	                         0x80 : 0));

	/*
	 * this isn't the same as continuing with a signal, but it will do
	 * for normal use.  strace only continues with a signal if the
	 * stopping signal is not SIGTRAP.  -brl
	 */
	if (current->exit_code) {
		send_sig(current->exit_code, current, 1);
		current->exit_code = 0;
	}
 out:
	if (unlikely(current->audit_context) && !entryexit)
		audit_syscall_entry(current, audit_arch(), regs->regs[2],
				    regs->regs[4], regs->regs[5],
				    regs->regs[6], regs->regs[7]);
}