| /* |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * ip22.h: Definitions for SGI IP22 machines |
| * |
| * Copyright (C) 1996 David S. Miller |
| * Copyright (C) 1997, 1998, 1999, 2000 Ralf Baechle |
| */ |
| |
| #ifndef _SGI_IP22_H |
| #define _SGI_IP22_H |
| |
| /* |
| * These are the virtual IRQ numbers, we divide all IRQ's into |
| * 'spaces', the 'space' determines where and how to enable/disable |
| * that particular IRQ on an SGI machine. HPC DMA and MC DMA interrups |
| * are not supported this way. Driver is supposed to allocate HPC/MC |
| * interrupt as shareable and then look to proper status bit (see |
| * HAL2 driver). This will prevent many complications, trust me ;-) |
| */ |
| |
| #include <asm/sgi/ioc.h> |
| |
| #define SGINT_EISA 0 /* 16 EISA irq levels (Indigo2) */ |
| #define SGINT_CPU 16 /* MIPS CPU define 8 interrupt sources */ |
| #define SGINT_LOCAL0 24 /* 8 local0 irq levels */ |
| #define SGINT_LOCAL1 32 /* 8 local1 irq levels */ |
| #define SGINT_LOCAL2 40 /* 8 local2 vectored irq levels */ |
| #define SGINT_LOCAL3 48 /* 8 local3 vectored irq levels */ |
| #define SGINT_END 56 /* End of 'spaces' */ |
| |
| /* |
| * Individual interrupt definitions for the Indy and Indigo2 |
| */ |
| |
| #define SGI_SOFT_0_IRQ SGINT_CPU + 0 |
| #define SGI_SOFT_1_IRQ SGINT_CPU + 1 |
| #define SGI_LOCAL_0_IRQ SGINT_CPU + 2 |
| #define SGI_LOCAL_1_IRQ SGINT_CPU + 3 |
| #define SGI_8254_0_IRQ SGINT_CPU + 4 |
| #define SGI_8254_1_IRQ SGINT_CPU + 5 |
| #define SGI_BUSERR_IRQ SGINT_CPU + 6 |
| #define SGI_TIMER_IRQ SGINT_CPU + 7 |
| |
| #define SGI_FIFO_IRQ SGINT_LOCAL0 + 0 /* FIFO full */ |
| #define SGI_GIO_0_IRQ SGI_FIFO_IRQ /* GIO-0 */ |
| #define SGI_WD93_0_IRQ SGINT_LOCAL0 + 1 /* 1st onboard WD93 */ |
| #define SGI_WD93_1_IRQ SGINT_LOCAL0 + 2 /* 2nd onboard WD93 */ |
| #define SGI_ENET_IRQ SGINT_LOCAL0 + 3 /* onboard ethernet */ |
| #define SGI_MCDMA_IRQ SGINT_LOCAL0 + 4 /* MC DMA done */ |
| #define SGI_PARPORT_IRQ SGINT_LOCAL0 + 5 /* Parallel port */ |
| #define SGI_GIO_1_IRQ SGINT_LOCAL0 + 6 /* GE / GIO-1 / 2nd-HPC */ |
| #define SGI_MAP_0_IRQ SGINT_LOCAL0 + 7 /* Mappable interrupt 0 */ |
| |
| #define SGI_GPL0_IRQ SGINT_LOCAL1 + 0 /* General Purpose LOCAL1_N<0> */ |
| #define SGI_PANEL_IRQ SGINT_LOCAL1 + 1 /* front panel */ |
| #define SGI_GPL2_IRQ SGINT_LOCAL1 + 2 /* General Purpose LOCAL1_N<2> */ |
| #define SGI_MAP_1_IRQ SGINT_LOCAL1 + 3 /* Mappable interrupt 1 */ |
| #define SGI_HPCDMA_IRQ SGINT_LOCAL1 + 4 /* HPC DMA done */ |
| #define SGI_ACFAIL_IRQ SGINT_LOCAL1 + 5 /* AC fail */ |
| #define SGI_VINO_IRQ SGINT_LOCAL1 + 6 /* Indy VINO */ |
| #define SGI_GIO_2_IRQ SGINT_LOCAL1 + 7 /* Vert retrace / GIO-2 */ |
| |
| /* Mapped interrupts. These interrupts may be mapped to either 0, or 1 */ |
| #define SGI_VERT_IRQ SGINT_LOCAL2 + 0 /* INT3: newport vertical status */ |
| #define SGI_EISA_IRQ SGINT_LOCAL2 + 3 /* EISA interrupts */ |
| #define SGI_KEYBD_IRQ SGINT_LOCAL2 + 4 /* keyboard */ |
| #define SGI_SERIAL_IRQ SGINT_LOCAL2 + 5 /* onboard serial */ |
| |
| #define ip22_is_fullhouse() (sgioc->sysid & SGIOC_SYSID_FULLHOUSE) |
| |
| extern unsigned short ip22_eeprom_read(volatile unsigned int *ctrl, int reg); |
| extern unsigned short ip22_nvram_read(int reg); |
| |
| #endif |
