| /* |
| * Copyright (C) 2000 David J. Mckay (david.mckay@st.com) |
| * |
| * May be copied or modified under the terms of the GNU General Public |
| * License. See linux/COPYING for more information. |
| * |
| */ |
| |
| #include <linux/config.h> |
| |
| #ifndef __OVERDRIVE_H__ |
| #define __OVERDRIVE_H__ |
| |
| #define OVERDRIVE_INT_CT 0xa3a00000 |
| #define OVERDRIVE_INT_DT 0xa3b00000 |
| |
| #define OVERDRIVE_CTRL 0xa3000000 |
| |
| /* Shoving all these bits into the same register is not a good idea. |
| * As soon as I get a spare moment, I'll change the FPGA and put each |
| * bit in a separate register |
| */ |
| |
| #define VALID_CTRL_BITS 0x1f |
| |
| #define ENABLE_RS232_MASK 0x1e |
| #define DISABLE_RS232_BIT 0x01 |
| |
| #define ENABLE_NMI_MASK 0x1d |
| #define DISABLE_NMI_BIT 0x02 |
| |
| #define RESET_PCI_MASK 0x1b |
| #define ENABLE_PCI_BIT 0x04 |
| |
| #define ENABLE_LED_MASK 0x17 |
| #define DISABLE_LED_BIT 0x08 |
| |
| #define RESET_FPGA_MASK 0x0f |
| #define ENABLE_FPGA_BIT 0x10 |
| |
| |
| #define FPGA_DCLK_ADDRESS 0xA3C00000 |
| |
| #define FPGA_DATA 0x01 /* W */ |
| #define FPGA_CONFDONE 0x02 /* R */ |
| #define FPGA_NOT_STATUS 0x04 /* R */ |
| #define FPGA_INITDONE 0x08 /* R */ |
| |
| #define FPGA_TIMEOUT 100000 |
| |
| |
| /* Interrupts for the overdrive. Note that these numbers have |
| * nothing to do with the actual IRQ numbers they appear on, |
| * this is all programmable. This is simply the position in the |
| * INT_CT register. |
| */ |
| |
| #define OVERDRIVE_PCI_INTA 0 |
| #define OVERDRIVE_PCI_INTB 1 |
| #define OVERDRIVE_PCI_INTC 2 |
| #define OVERDRIVE_PCI_INTD 3 |
| #define OVERDRIVE_GALILEO_INT 4 |
| #define OVERDRIVE_GALILEO_LOCAL_INT 5 |
| #define OVERDRIVE_AUDIO_INT 6 |
| #define OVERDRIVE_KEYBOARD_INT 7 |
| |
| /* Which Linux IRQ should we assign to each interrupt source? */ |
| #define OVERDRIVE_PCI_IRQ1 2 |
| #ifdef CONFIG_HACKED_NE2K |
| #define OVERDRIVE_PCI_IRQ2 7 |
| #else |
| #define OVERDRIVE_PCI_IRQ2 2 |
| #undef OVERDRIVE_PCI_INTB |
| #define OVERDRIVE_PCI_INTB OVERDRIVE_PCI_INTA |
| |
| #endif |
| |
| /* Put the ESS solo audio chip on IRQ 4 */ |
| #define OVERDRIVE_ESS_IRQ 4 |
| |
| /* Where the memory behind the PCI bus appears */ |
| #define PCI_DRAM_BASE 0xb7000000 |
| #define PCI_DRAM_SIZE (16*1024*1024) |
| #define PCI_DRAM_FINISH (PCI_DRAM_BASE+PCI_DRAM_SIZE-1) |
| |
| /* Where the IO region appears in the memory */ |
| #define PCI_GTIO_BASE 0xb8000000 |
| |
| #endif |
