include/asm-sparc/dma.h - linux/kernel/git/davem/net-next - Git at Google

 /* $Id: dma.h,v 1.35 1999/12/27 06:37:09 anton Exp $
  * include/asm-sparc/dma.h
  *
  * Copyright 1995 (C) David S. Miller (davem@caip.rutgers.edu)
  */

 #ifndef _ASM_SPARC_DMA_H
 #define _ASM_SPARC_DMA_H

 #include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/types.h>

 #include <asm/vac-ops.h>  /* for invalidate's, etc. */
 #include <asm/sbus.h>
 #include <asm/delay.h>
 #include <asm/oplib.h>
 #include <asm/system.h>
 #include <asm/io.h>
 #include <linux/spinlock.h>

 struct page;
 extern spinlock_t  dma_spin_lock;

 static __inline__ unsigned long claim_dma_lock(void)
 {
 	unsigned long flags;
 	spin_lock_irqsave(&dma_spin_lock, flags);
 	return flags;
 }

 static __inline__ void release_dma_lock(unsigned long flags)
 {
 	spin_unlock_irqrestore(&dma_spin_lock, flags);
 }

 /* These are irrelevant for Sparc DMA, but we leave it in so that
  * things can compile.
  */
 #define MAX_DMA_CHANNELS 8
 #define MAX_DMA_ADDRESS  (~0UL)
 #define DMA_MODE_READ    1
 #define DMA_MODE_WRITE   2

 /* Useful constants */
 #define SIZE_16MB      (16*1024*1024)
 #define SIZE_64K       (64*1024)

 /* SBUS DMA controller reg offsets */
 #define DMA_CSR		0x00UL		/* rw  DMA control/status register    0x00   */
 #define DMA_ADDR	0x04UL		/* rw  DMA transfer address register  0x04   */
 #define DMA_COUNT	0x08UL		/* rw  DMA transfer count register    0x08   */
 #define DMA_TEST	0x0cUL		/* rw  DMA test/debug register        0x0c   */

 /* DVMA chip revisions */
 enum dvma_rev {
 	dvmarev0,
 	dvmaesc1,
 	dvmarev1,
 	dvmarev2,
 	dvmarev3,
 	dvmarevplus,
 	dvmahme
 };

 #define DMA_HASCOUNT(rev)  ((rev)==dvmaesc1)

 /* Linux DMA information structure, filled during probe. */
 struct sbus_dma {
 	struct sbus_dma *next;
 	struct sbus_dev *sdev;
 	void __iomem *regs;

 	/* Status, misc info */
 	int node;                /* Prom node for this DMA device */
 	int running;             /* Are we doing DMA now? */
 	int allocated;           /* Are we "owned" by anyone yet? */

 	/* Transfer information. */
 	unsigned long addr;      /* Start address of current transfer */
 	int nbytes;              /* Size of current transfer */
 	int realbytes;           /* For splitting up large transfers, etc. */

 	/* DMA revision */
 	enum dvma_rev revision;
 };

 extern struct sbus_dma *dma_chain;

 /* Broken hardware... */
 #ifdef CONFIG_SUN4
 /* Have to sort this out. Does rev0 work fine on sun4[cmd] without isbroken?
  * Or is rev0 present only on sun4 boxes? -jj */
 #define DMA_ISBROKEN(dma)    ((dma)->revision == dvmarev0 || (dma)->revision == dvmarev1)
 #else
 #define DMA_ISBROKEN(dma)    ((dma)->revision == dvmarev1)
 #endif
 #define DMA_ISESC1(dma)      ((dma)->revision == dvmaesc1)

 /* Main routines in dma.c */
 extern void dvma_init(struct sbus_bus *);

 /* Fields in the cond_reg register */
 /* First, the version identification bits */
 #define DMA_DEVICE_ID    0xf0000000        /* Device identification bits */
 #define DMA_VERS0        0x00000000        /* Sunray DMA version */
 #define DMA_ESCV1        0x40000000        /* DMA ESC Version 1 */
 #define DMA_VERS1        0x80000000        /* DMA rev 1 */
 #define DMA_VERS2        0xa0000000        /* DMA rev 2 */
 #define DMA_VERHME       0xb0000000        /* DMA hme gate array */
 #define DMA_VERSPLUS     0x90000000        /* DMA rev 1 PLUS */

 #define DMA_HNDL_INTR    0x00000001        /* An IRQ needs to be handled */
 #define DMA_HNDL_ERROR   0x00000002        /* We need to take an error */
 #define DMA_FIFO_ISDRAIN 0x0000000c        /* The DMA FIFO is draining */
 #define DMA_INT_ENAB     0x00000010        /* Turn on interrupts */
 #define DMA_FIFO_INV     0x00000020        /* Invalidate the FIFO */
 #define DMA_ACC_SZ_ERR   0x00000040        /* The access size was bad */
 #define DMA_FIFO_STDRAIN 0x00000040        /* DMA_VERS1 Drain the FIFO */
 #define DMA_RST_SCSI     0x00000080        /* Reset the SCSI controller */
 #define DMA_RST_ENET     DMA_RST_SCSI      /* Reset the ENET controller */
 #define DMA_RST_BPP      DMA_RST_SCSI      /* Reset the BPP controller */
 #define DMA_ST_WRITE     0x00000100        /* write from device to memory */
 #define DMA_ENABLE       0x00000200        /* Fire up DMA, handle requests */
 #define DMA_PEND_READ    0x00000400        /* DMA_VERS1/0/PLUS Pending Read */
 #define DMA_ESC_BURST    0x00000800        /* 1=16byte 0=32byte */
 #define DMA_READ_AHEAD   0x00001800        /* DMA read ahead partial longword */
 #define DMA_DSBL_RD_DRN  0x00001000        /* No EC drain on slave reads */
 #define DMA_BCNT_ENAB    0x00002000        /* If on, use the byte counter */
 #define DMA_TERM_CNTR    0x00004000        /* Terminal counter */
 #define DMA_SCSI_SBUS64  0x00008000        /* HME: Enable 64-bit SBUS mode. */
 #define DMA_CSR_DISAB    0x00010000        /* No FIFO drains during csr */
 #define DMA_SCSI_DISAB   0x00020000        /* No FIFO drains during reg */
 #define DMA_DSBL_WR_INV  0x00020000        /* No EC inval. on slave writes */
 #define DMA_ADD_ENABLE   0x00040000        /* Special ESC DVMA optimization */
 #define DMA_E_BURSTS	 0x000c0000	   /* ENET: SBUS r/w burst mask */
 #define DMA_E_BURST32	 0x00040000	   /* ENET: SBUS 32 byte r/w burst */
 #define DMA_E_BURST16	 0x00000000	   /* ENET: SBUS 16 byte r/w burst */
 #define DMA_BRST_SZ      0x000c0000        /* SCSI: SBUS r/w burst size */
 #define DMA_BRST64       0x00080000        /* SCSI: 64byte bursts (HME on UltraSparc only) */
 #define DMA_BRST32       0x00040000        /* SCSI/BPP: 32byte bursts */
 #define DMA_BRST16       0x00000000        /* SCSI/BPP: 16byte bursts */
 #define DMA_BRST0        0x00080000        /* SCSI: no bursts (non-HME gate arrays) */
 #define DMA_ADDR_DISAB   0x00100000        /* No FIFO drains during addr */
 #define DMA_2CLKS        0x00200000        /* Each transfer = 2 clock ticks */
 #define DMA_3CLKS        0x00400000        /* Each transfer = 3 clock ticks */
 #define DMA_EN_ENETAUI   DMA_3CLKS         /* Put lance into AUI-cable mode */
 #define DMA_CNTR_DISAB   0x00800000        /* No IRQ when DMA_TERM_CNTR set */
 #define DMA_AUTO_NADDR   0x01000000        /* Use "auto nxt addr" feature */
 #define DMA_SCSI_ON      0x02000000        /* Enable SCSI dma */
 #define DMA_BPP_ON       DMA_SCSI_ON       /* Enable BPP dma */
 #define DMA_PARITY_OFF   0x02000000        /* HME: disable parity checking */
 #define DMA_LOADED_ADDR  0x04000000        /* Address has been loaded */
 #define DMA_LOADED_NADDR 0x08000000        /* Next address has been loaded */
 #define DMA_RESET_FAS366 0x08000000        /* HME: Assert RESET to FAS366 */

 /* Values describing the burst-size property from the PROM */
 #define DMA_BURST1       0x01
 #define DMA_BURST2       0x02
 #define DMA_BURST4       0x04
 #define DMA_BURST8       0x08
 #define DMA_BURST16      0x10
 #define DMA_BURST32      0x20
 #define DMA_BURST64      0x40
 #define DMA_BURSTBITS    0x7f

 /* Determine highest possible final transfer address given a base */
 #define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL))

 /* Yes, I hack a lot of elisp in my spare time... */
 #define DMA_ERROR_P(regs)  ((((regs)->cond_reg) & DMA_HNDL_ERROR))
 #define DMA_IRQ_P(regs)    ((((regs)->cond_reg) & (DMA_HNDL_INTR | DMA_HNDL_ERROR)))
 #define DMA_WRITE_P(regs)  ((((regs)->cond_reg) & DMA_ST_WRITE))
 #define DMA_OFF(regs)      ((((regs)->cond_reg) &= (~DMA_ENABLE)))
 #define DMA_INTSOFF(regs)  ((((regs)->cond_reg) &= (~DMA_INT_ENAB)))
 #define DMA_INTSON(regs)   ((((regs)->cond_reg) |= (DMA_INT_ENAB)))
 #define DMA_PUNTFIFO(regs) ((((regs)->cond_reg) |= DMA_FIFO_INV))
 #define DMA_SETSTART(regs, addr)  ((((regs)->st_addr) = (char *) addr))
 #define DMA_BEGINDMA_W(regs) \
         ((((regs)->cond_reg |= (DMA_ST_WRITE|DMA_ENABLE|DMA_INT_ENAB))))
 #define DMA_BEGINDMA_R(regs) \
         ((((regs)->cond_reg |= ((DMA_ENABLE|DMA_INT_ENAB)&(~DMA_ST_WRITE)))))

 /* For certain DMA chips, we need to disable ints upon irq entry
  * and turn them back on when we are done.  So in any ESP interrupt
  * handler you *must* call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT
  * when leaving the handler.  You have been warned...
  */
 #define DMA_IRQ_ENTRY(dma, dregs) do { \
         if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \
    } while (0)

 #define DMA_IRQ_EXIT(dma, dregs) do { \
 	if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \
    } while(0)

 #if 0	/* P3 this stuff is inline in ledma.c:init_restart_ledma() */
 /* Pause until counter runs out or BIT isn't set in the DMA condition
  * register.
  */
 extern __inline__ void sparc_dma_pause(struct sparc_dma_registers *regs,
 				       unsigned long bit)
 {
 	int ctr = 50000;   /* Let's find some bugs ;) */

 	/* Busy wait until the bit is not set any more */
 	while((regs->cond_reg&bit) && (ctr>0)) {
 		ctr--;
 		__delay(5);
 	}

 	/* Check for bogus outcome. */
 	if(!ctr)
 		panic("DMA timeout");
 }

 /* Reset the friggin' thing... */
 #define DMA_RESET(dma) do { \
 	struct sparc_dma_registers *regs = dma->regs;                      \
 	/* Let the current FIFO drain itself */                            \
 	sparc_dma_pause(regs, (DMA_FIFO_ISDRAIN));                         \
 	/* Reset the logic */                                              \
 	regs->cond_reg |= (DMA_RST_SCSI);     /* assert */                 \
 	__delay(400);                         /* let the bits set ;) */    \
 	regs->cond_reg &= ~(DMA_RST_SCSI);    /* de-assert */              \
 	sparc_dma_enable_interrupts(regs);    /* Re-enable interrupts */   \
 	/* Enable FAST transfers if available */                           \
 	if(dma->revision>dvmarev1) regs->cond_reg |= DMA_3CLKS;            \
 	dma->running = 0;                                                  \
 } while(0)
 #endif

 #define for_each_dvma(dma) \
         for((dma) = dma_chain; (dma); (dma) = (dma)->next)

 extern int get_dma_list(char *);
 extern int request_dma(unsigned int, __const__ char *);
 extern void free_dma(unsigned int);

 /* From PCI */

 #ifdef CONFIG_PCI
 extern int isa_dma_bridge_buggy;
 #else
 #define isa_dma_bridge_buggy	(0)
 #endif

 /* Routines for data transfer buffers. */
 BTFIXUPDEF_CALL(char *, mmu_lockarea, char *, unsigned long)
 BTFIXUPDEF_CALL(void,   mmu_unlockarea, char *, unsigned long)

 #define mmu_lockarea(vaddr,len) BTFIXUP_CALL(mmu_lockarea)(vaddr,len)
 #define mmu_unlockarea(vaddr,len) BTFIXUP_CALL(mmu_unlockarea)(vaddr,len)

 /* These are implementations for sbus_map_sg/sbus_unmap_sg... collapse later */
 BTFIXUPDEF_CALL(__u32, mmu_get_scsi_one, char *, unsigned long, struct sbus_bus *sbus)
 BTFIXUPDEF_CALL(void,  mmu_get_scsi_sgl, struct scatterlist *, int, struct sbus_bus *sbus)
 BTFIXUPDEF_CALL(void,  mmu_release_scsi_one, __u32, unsigned long, struct sbus_bus *sbus)
 BTFIXUPDEF_CALL(void,  mmu_release_scsi_sgl, struct scatterlist *, int, struct sbus_bus *sbus)

 #define mmu_get_scsi_one(vaddr,len,sbus) BTFIXUP_CALL(mmu_get_scsi_one)(vaddr,len,sbus)
 #define mmu_get_scsi_sgl(sg,sz,sbus) BTFIXUP_CALL(mmu_get_scsi_sgl)(sg,sz,sbus)
 #define mmu_release_scsi_one(vaddr,len,sbus) BTFIXUP_CALL(mmu_release_scsi_one)(vaddr,len,sbus)
 #define mmu_release_scsi_sgl(sg,sz,sbus) BTFIXUP_CALL(mmu_release_scsi_sgl)(sg,sz,sbus)

 /*
  * mmu_map/unmap are provided by iommu/iounit; Invalid to call on IIep.
  *
  * The mmu_map_dma_area establishes two mappings in one go.
  * These mappings point to pages normally mapped at 'va' (linear address).
  * First mapping is for CPU visible address at 'a', uncached.
  * This is an alias, but it works because it is an uncached mapping.
  * Second mapping is for device visible address, or "bus" address.
  * The bus address is returned at '*pba'.
  *
  * These functions seem distinct, but are hard to split. On sun4c,
  * at least for now, 'a' is equal to bus address, and retured in *pba.
  * On sun4m, page attributes depend on the CPU type, so we have to
  * know if we are mapping RAM or I/O, so it has to be an additional argument
  * to a separate mapping function for CPU visible mappings.
  */
 BTFIXUPDEF_CALL(int,  mmu_map_dma_area, dma_addr_t *, unsigned long, unsigned long, int len)
 BTFIXUPDEF_CALL(struct page *, mmu_translate_dvma, unsigned long busa)
 BTFIXUPDEF_CALL(void,  mmu_unmap_dma_area, unsigned long busa, int len)

 #define mmu_map_dma_area(pba,va,a,len) BTFIXUP_CALL(mmu_map_dma_area)(pba,va,a,len)
 #define mmu_unmap_dma_area(ba,len) BTFIXUP_CALL(mmu_unmap_dma_area)(ba,len)
 #define mmu_translate_dvma(ba)     BTFIXUP_CALL(mmu_translate_dvma)(ba)

 #endif /* !(_ASM_SPARC_DMA_H) */
	/* $Id: dma.h,v 1.35 1999/12/27 06:37:09 anton Exp $
	* include/asm-sparc/dma.h
	*
	* Copyright 1995 (C) David S. Miller (davem@caip.rutgers.edu)
	*/

	#ifndef _ASM_SPARC_DMA_H
	#define _ASM_SPARC_DMA_H

	#include <linux/config.h>
	#include <linux/kernel.h>
	#include <linux/types.h>

	#include <asm/vac-ops.h> /* for invalidate's, etc. */
	#include <asm/sbus.h>
	#include <asm/delay.h>
	#include <asm/oplib.h>
	#include <asm/system.h>
	#include <asm/io.h>
	#include <linux/spinlock.h>

	struct page;
	extern spinlock_t dma_spin_lock;

	static __inline__ unsigned long claim_dma_lock(void)
	{
	unsigned long flags;
	spin_lock_irqsave(&dma_spin_lock, flags);
	return flags;
	}

	static __inline__ void release_dma_lock(unsigned long flags)
	{
	spin_unlock_irqrestore(&dma_spin_lock, flags);
	}

	/* These are irrelevant for Sparc DMA, but we leave it in so that
	* things can compile.
	*/
	#define MAX_DMA_CHANNELS 8
	#define MAX_DMA_ADDRESS (~0UL)
	#define DMA_MODE_READ 1
	#define DMA_MODE_WRITE 2

	/* Useful constants */
	#define SIZE_16MB (1610241024)
	#define SIZE_64K (64*1024)

	/* SBUS DMA controller reg offsets */
	#define DMA_CSR 0x00UL /* rw DMA control/status register 0x00 */
	#define DMA_ADDR 0x04UL /* rw DMA transfer address register 0x04 */
	#define DMA_COUNT 0x08UL /* rw DMA transfer count register 0x08 */
	#define DMA_TEST 0x0cUL /* rw DMA test/debug register 0x0c */

	/* DVMA chip revisions */
	enum dvma_rev {
	dvmarev0,
	dvmaesc1,
	dvmarev1,
	dvmarev2,
	dvmarev3,
	dvmarevplus,
	dvmahme
	};

	#define DMA_HASCOUNT(rev) ((rev)==dvmaesc1)

	/* Linux DMA information structure, filled during probe. */
	struct sbus_dma {
	struct sbus_dma *next;
	struct sbus_dev *sdev;
	void __iomem *regs;

	/* Status, misc info */
	int node; /* Prom node for this DMA device */
	int running; /* Are we doing DMA now? */
	int allocated; /* Are we "owned" by anyone yet? */

	/* Transfer information. */
	unsigned long addr; /* Start address of current transfer */
	int nbytes; /* Size of current transfer */
	int realbytes; /* For splitting up large transfers, etc. */

	/* DMA revision */
	enum dvma_rev revision;
	};

	extern struct sbus_dma *dma_chain;

	/* Broken hardware... */
	#ifdef CONFIG_SUN4
	/* Have to sort this out. Does rev0 work fine on sun4[cmd] without isbroken?
	* Or is rev0 present only on sun4 boxes? -jj */
	#define DMA_ISBROKEN(dma) ((dma)->revision == dvmarev0 \|\| (dma)->revision == dvmarev1)
	#else
	#define DMA_ISBROKEN(dma) ((dma)->revision == dvmarev1)
	#endif
	#define DMA_ISESC1(dma) ((dma)->revision == dvmaesc1)

	/* Main routines in dma.c */
	extern void dvma_init(struct sbus_bus *);

	/* Fields in the cond_reg register */
	/* First, the version identification bits */
	#define DMA_DEVICE_ID 0xf0000000 /* Device identification bits */
	#define DMA_VERS0 0x00000000 /* Sunray DMA version */
	#define DMA_ESCV1 0x40000000 /* DMA ESC Version 1 */
	#define DMA_VERS1 0x80000000 /* DMA rev 1 */
	#define DMA_VERS2 0xa0000000 /* DMA rev 2 */
	#define DMA_VERHME 0xb0000000 /* DMA hme gate array */
	#define DMA_VERSPLUS 0x90000000 /* DMA rev 1 PLUS */

	#define DMA_HNDL_INTR 0x00000001 /* An IRQ needs to be handled */
	#define DMA_HNDL_ERROR 0x00000002 /* We need to take an error */
	#define DMA_FIFO_ISDRAIN 0x0000000c /* The DMA FIFO is draining */
	#define DMA_INT_ENAB 0x00000010 /* Turn on interrupts */
	#define DMA_FIFO_INV 0x00000020 /* Invalidate the FIFO */
	#define DMA_ACC_SZ_ERR 0x00000040 /* The access size was bad */
	#define DMA_FIFO_STDRAIN 0x00000040 /* DMA_VERS1 Drain the FIFO */
	#define DMA_RST_SCSI 0x00000080 /* Reset the SCSI controller */
	#define DMA_RST_ENET DMA_RST_SCSI /* Reset the ENET controller */
	#define DMA_RST_BPP DMA_RST_SCSI /* Reset the BPP controller */
	#define DMA_ST_WRITE 0x00000100 /* write from device to memory */
	#define DMA_ENABLE 0x00000200 /* Fire up DMA, handle requests */
	#define DMA_PEND_READ 0x00000400 /* DMA_VERS1/0/PLUS Pending Read */
	#define DMA_ESC_BURST 0x00000800 /* 1=16byte 0=32byte */
	#define DMA_READ_AHEAD 0x00001800 /* DMA read ahead partial longword */
	#define DMA_DSBL_RD_DRN 0x00001000 /* No EC drain on slave reads */
	#define DMA_BCNT_ENAB 0x00002000 /* If on, use the byte counter */
	#define DMA_TERM_CNTR 0x00004000 /* Terminal counter */
	#define DMA_SCSI_SBUS64 0x00008000 /* HME: Enable 64-bit SBUS mode. */
	#define DMA_CSR_DISAB 0x00010000 /* No FIFO drains during csr */
	#define DMA_SCSI_DISAB 0x00020000 /* No FIFO drains during reg */
	#define DMA_DSBL_WR_INV 0x00020000 /* No EC inval. on slave writes */
	#define DMA_ADD_ENABLE 0x00040000 /* Special ESC DVMA optimization */
	#define DMA_E_BURSTS 0x000c0000 /* ENET: SBUS r/w burst mask */
	#define DMA_E_BURST32 0x00040000 /* ENET: SBUS 32 byte r/w burst */
	#define DMA_E_BURST16 0x00000000 /* ENET: SBUS 16 byte r/w burst */
	#define DMA_BRST_SZ 0x000c0000 /* SCSI: SBUS r/w burst size */
	#define DMA_BRST64 0x00080000 /* SCSI: 64byte bursts (HME on UltraSparc only) */
	#define DMA_BRST32 0x00040000 /* SCSI/BPP: 32byte bursts */
	#define DMA_BRST16 0x00000000 /* SCSI/BPP: 16byte bursts */
	#define DMA_BRST0 0x00080000 /* SCSI: no bursts (non-HME gate arrays) */
	#define DMA_ADDR_DISAB 0x00100000 /* No FIFO drains during addr */
	#define DMA_2CLKS 0x00200000 /* Each transfer = 2 clock ticks */
	#define DMA_3CLKS 0x00400000 /* Each transfer = 3 clock ticks */
	#define DMA_EN_ENETAUI DMA_3CLKS /* Put lance into AUI-cable mode */
	#define DMA_CNTR_DISAB 0x00800000 /* No IRQ when DMA_TERM_CNTR set */
	#define DMA_AUTO_NADDR 0x01000000 /* Use "auto nxt addr" feature */
	#define DMA_SCSI_ON 0x02000000 /* Enable SCSI dma */
	#define DMA_BPP_ON DMA_SCSI_ON /* Enable BPP dma */
	#define DMA_PARITY_OFF 0x02000000 /* HME: disable parity checking */
	#define DMA_LOADED_ADDR 0x04000000 /* Address has been loaded */
	#define DMA_LOADED_NADDR 0x08000000 /* Next address has been loaded */
	#define DMA_RESET_FAS366 0x08000000 /* HME: Assert RESET to FAS366 */

	/* Values describing the burst-size property from the PROM */
	#define DMA_BURST1 0x01
	#define DMA_BURST2 0x02
	#define DMA_BURST4 0x04
	#define DMA_BURST8 0x08
	#define DMA_BURST16 0x10
	#define DMA_BURST32 0x20
	#define DMA_BURST64 0x40
	#define DMA_BURSTBITS 0x7f

	/* Determine highest possible final transfer address given a base */
	#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL))

	/* Yes, I hack a lot of elisp in my spare time... */
	#define DMA_ERROR_P(regs) ((((regs)->cond_reg) & DMA_HNDL_ERROR))
	#define DMA_IRQ_P(regs) ((((regs)->cond_reg) & (DMA_HNDL_INTR \| DMA_HNDL_ERROR)))
	#define DMA_WRITE_P(regs) ((((regs)->cond_reg) & DMA_ST_WRITE))
	#define DMA_OFF(regs) ((((regs)->cond_reg) &= (~DMA_ENABLE)))
	#define DMA_INTSOFF(regs) ((((regs)->cond_reg) &= (~DMA_INT_ENAB)))
	#define DMA_INTSON(regs) ((((regs)->cond_reg) \|= (DMA_INT_ENAB)))
	#define DMA_PUNTFIFO(regs) ((((regs)->cond_reg) \|= DMA_FIFO_INV))
	#define DMA_SETSTART(regs, addr) ((((regs)->st_addr) = (char *) addr))
	#define DMA_BEGINDMA_W(regs) \
	((((regs)->cond_reg \|= (DMA_ST_WRITE\|DMA_ENABLE\|DMA_INT_ENAB))))
	#define DMA_BEGINDMA_R(regs) \
	((((regs)->cond_reg \|= ((DMA_ENABLE\|DMA_INT_ENAB)&(~DMA_ST_WRITE)))))

	/* For certain DMA chips, we need to disable ints upon irq entry
	* and turn them back on when we are done. So in any ESP interrupt
	* handler you must call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT
	* when leaving the handler. You have been warned...
	*/
	#define DMA_IRQ_ENTRY(dma, dregs) do { \
	if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \
	} while (0)

	#define DMA_IRQ_EXIT(dma, dregs) do { \
	if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \
	} while(0)

	#if 0 /* P3 this stuff is inline in ledma.c:init_restart_ledma() */
	/* Pause until counter runs out or BIT isn't set in the DMA condition
	* register.
	*/
	extern __inline__ void sparc_dma_pause(struct sparc_dma_registers *regs,
	unsigned long bit)
	{
	int ctr = 50000; /* Let's find some bugs ;) */

	/* Busy wait until the bit is not set any more */
	while((regs->cond_reg&bit) && (ctr>0)) {
	ctr--;
	__delay(5);
	}

	/* Check for bogus outcome. */
	if(!ctr)
	panic("DMA timeout");
	}

	/* Reset the friggin' thing... */
	#define DMA_RESET(dma) do { \
	struct sparc_dma_registers *regs = dma->regs; \
	/* Let the current FIFO drain itself */ \
	sparc_dma_pause(regs, (DMA_FIFO_ISDRAIN)); \
	/* Reset the logic */ \
	regs->cond_reg \|= (DMA_RST_SCSI); /* assert */ \
	__delay(400); /* let the bits set ;) */ \
	regs->cond_reg &= ~(DMA_RST_SCSI); /* de-assert */ \
	sparc_dma_enable_interrupts(regs); /* Re-enable interrupts */ \
	/* Enable FAST transfers if available */ \
	if(dma->revision>dvmarev1) regs->cond_reg \|= DMA_3CLKS; \
	dma->running = 0; \
	} while(0)
	#endif

	#define for_each_dvma(dma) \
	for((dma) = dma_chain; (dma); (dma) = (dma)->next)

	extern int get_dma_list(char *);
	extern int request_dma(unsigned int, __const__ char *);
	extern void free_dma(unsigned int);

	/* From PCI */

	#ifdef CONFIG_PCI
	extern int isa_dma_bridge_buggy;
	#else
	#define isa_dma_bridge_buggy (0)
	#endif

	/* Routines for data transfer buffers. */
	BTFIXUPDEF_CALL(char , mmu_lockarea, char , unsigned long)
	BTFIXUPDEF_CALL(void, mmu_unlockarea, char *, unsigned long)

	#define mmu_lockarea(vaddr,len) BTFIXUP_CALL(mmu_lockarea)(vaddr,len)
	#define mmu_unlockarea(vaddr,len) BTFIXUP_CALL(mmu_unlockarea)(vaddr,len)

	/* These are implementations for sbus_map_sg/sbus_unmap_sg... collapse later */
	BTFIXUPDEF_CALL(__u32, mmu_get_scsi_one, char , unsigned long, struct sbus_bus sbus)
	BTFIXUPDEF_CALL(void, mmu_get_scsi_sgl, struct scatterlist , int, struct sbus_bus sbus)
	BTFIXUPDEF_CALL(void, mmu_release_scsi_one, __u32, unsigned long, struct sbus_bus *sbus)
	BTFIXUPDEF_CALL(void, mmu_release_scsi_sgl, struct scatterlist , int, struct sbus_bus sbus)

	#define mmu_get_scsi_one(vaddr,len,sbus) BTFIXUP_CALL(mmu_get_scsi_one)(vaddr,len,sbus)
	#define mmu_get_scsi_sgl(sg,sz,sbus) BTFIXUP_CALL(mmu_get_scsi_sgl)(sg,sz,sbus)
	#define mmu_release_scsi_one(vaddr,len,sbus) BTFIXUP_CALL(mmu_release_scsi_one)(vaddr,len,sbus)
	#define mmu_release_scsi_sgl(sg,sz,sbus) BTFIXUP_CALL(mmu_release_scsi_sgl)(sg,sz,sbus)

	/*
	* mmu_map/unmap are provided by iommu/iounit; Invalid to call on IIep.
	*
	* The mmu_map_dma_area establishes two mappings in one go.
	* These mappings point to pages normally mapped at 'va' (linear address).
	* First mapping is for CPU visible address at 'a', uncached.
	* This is an alias, but it works because it is an uncached mapping.
	* Second mapping is for device visible address, or "bus" address.
	* The bus address is returned at '*pba'.
	*
	* These functions seem distinct, but are hard to split. On sun4c,
	* at least for now, 'a' is equal to bus address, and retured in *pba.
	* On sun4m, page attributes depend on the CPU type, so we have to
	* know if we are mapping RAM or I/O, so it has to be an additional argument
	* to a separate mapping function for CPU visible mappings.
	*/
	BTFIXUPDEF_CALL(int, mmu_map_dma_area, dma_addr_t *, unsigned long, unsigned long, int len)
	BTFIXUPDEF_CALL(struct page *, mmu_translate_dvma, unsigned long busa)
	BTFIXUPDEF_CALL(void, mmu_unmap_dma_area, unsigned long busa, int len)

	#define mmu_map_dma_area(pba,va,a,len) BTFIXUP_CALL(mmu_map_dma_area)(pba,va,a,len)
	#define mmu_unmap_dma_area(ba,len) BTFIXUP_CALL(mmu_unmap_dma_area)(ba,len)
	#define mmu_translate_dvma(ba) BTFIXUP_CALL(mmu_translate_dvma)(ba)

	#endif /* !(_ASM_SPARC_DMA_H) */