blob: 0e2fa14f142377b0c47751d2eb99fa11cb4e445d [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
/*
* Amlogic Meson8b, Meson8m2 and GXBB DWMAC glue layer
*
* Copyright (C) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
*/
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/device.h>
#include <linux/ethtool.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/of_net.h>
#include <linux/mfd/syscon.h>
#include <linux/platform_device.h>
#include <linux/stmmac.h>
#include "stmmac_platform.h"
#define PRG_ETH0 0x0
#define PRG_ETH0_RGMII_MODE BIT(0)
#define PRG_ETH0_EXT_PHY_MODE_MASK GENMASK(2, 0)
#define PRG_ETH0_EXT_RGMII_MODE 1
#define PRG_ETH0_EXT_RMII_MODE 4
/* mux to choose between fclk_div2 (bit unset) and mpll2 (bit set) */
#define PRG_ETH0_CLK_M250_SEL_SHIFT 4
#define PRG_ETH0_CLK_M250_SEL_MASK GENMASK(4, 4)
#define PRG_ETH0_TXDLY_SHIFT 5
#define PRG_ETH0_TXDLY_MASK GENMASK(6, 5)
/* divider for the result of m250_sel */
#define PRG_ETH0_CLK_M250_DIV_SHIFT 7
#define PRG_ETH0_CLK_M250_DIV_WIDTH 3
#define PRG_ETH0_RGMII_TX_CLK_EN 10
#define PRG_ETH0_INVERTED_RMII_CLK BIT(11)
#define PRG_ETH0_TX_AND_PHY_REF_CLK BIT(12)
#define MUX_CLK_NUM_PARENTS 2
struct meson8b_dwmac;
struct meson8b_dwmac_data {
int (*set_phy_mode)(struct meson8b_dwmac *dwmac);
};
struct meson8b_dwmac {
struct device *dev;
void __iomem *regs;
const struct meson8b_dwmac_data *data;
phy_interface_t phy_mode;
struct clk *rgmii_tx_clk;
u32 tx_delay_ns;
};
struct meson8b_dwmac_clk_configs {
struct clk_mux m250_mux;
struct clk_divider m250_div;
struct clk_fixed_factor fixed_div2;
struct clk_gate rgmii_tx_en;
};
static void meson8b_dwmac_mask_bits(struct meson8b_dwmac *dwmac, u32 reg,
u32 mask, u32 value)
{
u32 data;
data = readl(dwmac->regs + reg);
data &= ~mask;
data |= (value & mask);
writel(data, dwmac->regs + reg);
}
static struct clk *meson8b_dwmac_register_clk(struct meson8b_dwmac *dwmac,
const char *name_suffix,
const char **parent_names,
int num_parents,
const struct clk_ops *ops,
struct clk_hw *hw)
{
struct clk_init_data init;
char clk_name[32];
snprintf(clk_name, sizeof(clk_name), "%s#%s", dev_name(dwmac->dev),
name_suffix);
init.name = clk_name;
init.ops = ops;
init.flags = CLK_SET_RATE_PARENT;
init.parent_names = parent_names;
init.num_parents = num_parents;
hw->init = &init;
return devm_clk_register(dwmac->dev, hw);
}
static int meson8b_init_rgmii_tx_clk(struct meson8b_dwmac *dwmac)
{
int i, ret;
struct clk *clk;
struct device *dev = dwmac->dev;
const char *parent_name, *mux_parent_names[MUX_CLK_NUM_PARENTS];
struct meson8b_dwmac_clk_configs *clk_configs;
static const struct clk_div_table div_table[] = {
{ .div = 2, .val = 2, },
{ .div = 3, .val = 3, },
{ .div = 4, .val = 4, },
{ .div = 5, .val = 5, },
{ .div = 6, .val = 6, },
{ .div = 7, .val = 7, },
};
clk_configs = devm_kzalloc(dev, sizeof(*clk_configs), GFP_KERNEL);
if (!clk_configs)
return -ENOMEM;
/* get the mux parents from DT */
for (i = 0; i < MUX_CLK_NUM_PARENTS; i++) {
char name[16];
snprintf(name, sizeof(name), "clkin%d", i);
clk = devm_clk_get(dev, name);
if (IS_ERR(clk)) {
ret = PTR_ERR(clk);
if (ret != -EPROBE_DEFER)
dev_err(dev, "Missing clock %s\n", name);
return ret;
}
mux_parent_names[i] = __clk_get_name(clk);
}
clk_configs->m250_mux.reg = dwmac->regs + PRG_ETH0;
clk_configs->m250_mux.shift = PRG_ETH0_CLK_M250_SEL_SHIFT;
clk_configs->m250_mux.mask = PRG_ETH0_CLK_M250_SEL_MASK;
clk = meson8b_dwmac_register_clk(dwmac, "m250_sel", mux_parent_names,
MUX_CLK_NUM_PARENTS, &clk_mux_ops,
&clk_configs->m250_mux.hw);
if (WARN_ON(IS_ERR(clk)))
return PTR_ERR(clk);
parent_name = __clk_get_name(clk);
clk_configs->m250_div.reg = dwmac->regs + PRG_ETH0;
clk_configs->m250_div.shift = PRG_ETH0_CLK_M250_DIV_SHIFT;
clk_configs->m250_div.width = PRG_ETH0_CLK_M250_DIV_WIDTH;
clk_configs->m250_div.table = div_table;
clk_configs->m250_div.flags = CLK_DIVIDER_ALLOW_ZERO |
CLK_DIVIDER_ROUND_CLOSEST;
clk = meson8b_dwmac_register_clk(dwmac, "m250_div", &parent_name, 1,
&clk_divider_ops,
&clk_configs->m250_div.hw);
if (WARN_ON(IS_ERR(clk)))
return PTR_ERR(clk);
parent_name = __clk_get_name(clk);
clk_configs->fixed_div2.mult = 1;
clk_configs->fixed_div2.div = 2;
clk = meson8b_dwmac_register_clk(dwmac, "fixed_div2", &parent_name, 1,
&clk_fixed_factor_ops,
&clk_configs->fixed_div2.hw);
if (WARN_ON(IS_ERR(clk)))
return PTR_ERR(clk);
parent_name = __clk_get_name(clk);
clk_configs->rgmii_tx_en.reg = dwmac->regs + PRG_ETH0;
clk_configs->rgmii_tx_en.bit_idx = PRG_ETH0_RGMII_TX_CLK_EN;
clk = meson8b_dwmac_register_clk(dwmac, "rgmii_tx_en", &parent_name, 1,
&clk_gate_ops,
&clk_configs->rgmii_tx_en.hw);
if (WARN_ON(IS_ERR(clk)))
return PTR_ERR(clk);
dwmac->rgmii_tx_clk = clk;
return 0;
}
static int meson8b_set_phy_mode(struct meson8b_dwmac *dwmac)
{
switch (dwmac->phy_mode) {
case PHY_INTERFACE_MODE_RGMII:
case PHY_INTERFACE_MODE_RGMII_RXID:
case PHY_INTERFACE_MODE_RGMII_ID:
case PHY_INTERFACE_MODE_RGMII_TXID:
/* enable RGMII mode */
meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
PRG_ETH0_RGMII_MODE,
PRG_ETH0_RGMII_MODE);
break;
case PHY_INTERFACE_MODE_RMII:
/* disable RGMII mode -> enables RMII mode */
meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
PRG_ETH0_RGMII_MODE, 0);
break;
default:
dev_err(dwmac->dev, "fail to set phy-mode %s\n",
phy_modes(dwmac->phy_mode));
return -EINVAL;
}
return 0;
}
static int meson_axg_set_phy_mode(struct meson8b_dwmac *dwmac)
{
switch (dwmac->phy_mode) {
case PHY_INTERFACE_MODE_RGMII:
case PHY_INTERFACE_MODE_RGMII_RXID:
case PHY_INTERFACE_MODE_RGMII_ID:
case PHY_INTERFACE_MODE_RGMII_TXID:
/* enable RGMII mode */
meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
PRG_ETH0_EXT_PHY_MODE_MASK,
PRG_ETH0_EXT_RGMII_MODE);
break;
case PHY_INTERFACE_MODE_RMII:
/* disable RGMII mode -> enables RMII mode */
meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
PRG_ETH0_EXT_PHY_MODE_MASK,
PRG_ETH0_EXT_RMII_MODE);
break;
default:
dev_err(dwmac->dev, "fail to set phy-mode %s\n",
phy_modes(dwmac->phy_mode));
return -EINVAL;
}
return 0;
}
static int meson8b_init_prg_eth(struct meson8b_dwmac *dwmac)
{
int ret;
u8 tx_dly_val = 0;
switch (dwmac->phy_mode) {
case PHY_INTERFACE_MODE_RGMII:
case PHY_INTERFACE_MODE_RGMII_RXID:
/* TX clock delay in ns = "8ns / 4 * tx_dly_val" (where
* 8ns are exactly one cycle of the 125MHz RGMII TX clock):
* 0ns = 0x0, 2ns = 0x1, 4ns = 0x2, 6ns = 0x3
*/
tx_dly_val = dwmac->tx_delay_ns >> 1;
/* fall through */
case PHY_INTERFACE_MODE_RGMII_ID:
case PHY_INTERFACE_MODE_RGMII_TXID:
/* only relevant for RMII mode -> disable in RGMII mode */
meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
PRG_ETH0_INVERTED_RMII_CLK, 0);
meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_TXDLY_MASK,
tx_dly_val << PRG_ETH0_TXDLY_SHIFT);
/* Configure the 125MHz RGMII TX clock, the IP block changes
* the output automatically (= without us having to configure
* a register) based on the line-speed (125MHz for Gbit speeds,
* 25MHz for 100Mbit/s and 2.5MHz for 10Mbit/s).
*/
ret = clk_set_rate(dwmac->rgmii_tx_clk, 125 * 1000 * 1000);
if (ret) {
dev_err(dwmac->dev,
"failed to set RGMII TX clock\n");
return ret;
}
ret = clk_prepare_enable(dwmac->rgmii_tx_clk);
if (ret) {
dev_err(dwmac->dev,
"failed to enable the RGMII TX clock\n");
return ret;
}
devm_add_action_or_reset(dwmac->dev,
(void(*)(void *))clk_disable_unprepare,
dwmac->rgmii_tx_clk);
break;
case PHY_INTERFACE_MODE_RMII:
/* invert internal clk_rmii_i to generate 25/2.5 tx_rx_clk */
meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
PRG_ETH0_INVERTED_RMII_CLK,
PRG_ETH0_INVERTED_RMII_CLK);
/* TX clock delay cannot be configured in RMII mode */
meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_TXDLY_MASK,
0);
break;
default:
dev_err(dwmac->dev, "unsupported phy-mode %s\n",
phy_modes(dwmac->phy_mode));
return -EINVAL;
}
/* enable TX_CLK and PHY_REF_CLK generator */
meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_TX_AND_PHY_REF_CLK,
PRG_ETH0_TX_AND_PHY_REF_CLK);
return 0;
}
static int meson8b_dwmac_probe(struct platform_device *pdev)
{
struct plat_stmmacenet_data *plat_dat;
struct stmmac_resources stmmac_res;
struct meson8b_dwmac *dwmac;
int ret;
ret = stmmac_get_platform_resources(pdev, &stmmac_res);
if (ret)
return ret;
plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
if (IS_ERR(plat_dat))
return PTR_ERR(plat_dat);
dwmac = devm_kzalloc(&pdev->dev, sizeof(*dwmac), GFP_KERNEL);
if (!dwmac) {
ret = -ENOMEM;
goto err_remove_config_dt;
}
dwmac->data = (const struct meson8b_dwmac_data *)
of_device_get_match_data(&pdev->dev);
if (!dwmac->data) {
ret = -EINVAL;
goto err_remove_config_dt;
}
dwmac->regs = devm_platform_ioremap_resource(pdev, 1);
if (IS_ERR(dwmac->regs)) {
ret = PTR_ERR(dwmac->regs);
goto err_remove_config_dt;
}
dwmac->dev = &pdev->dev;
ret = of_get_phy_mode(pdev->dev.of_node, &dwmac->phy_mode);
if (ret) {
dev_err(&pdev->dev, "missing phy-mode property\n");
goto err_remove_config_dt;
}
/* use 2ns as fallback since this value was previously hardcoded */
if (of_property_read_u32(pdev->dev.of_node, "amlogic,tx-delay-ns",
&dwmac->tx_delay_ns))
dwmac->tx_delay_ns = 2;
ret = meson8b_init_rgmii_tx_clk(dwmac);
if (ret)
goto err_remove_config_dt;
ret = dwmac->data->set_phy_mode(dwmac);
if (ret)
goto err_remove_config_dt;
ret = meson8b_init_prg_eth(dwmac);
if (ret)
goto err_remove_config_dt;
plat_dat->bsp_priv = dwmac;
ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
if (ret)
goto err_remove_config_dt;
return 0;
err_remove_config_dt:
stmmac_remove_config_dt(pdev, plat_dat);
return ret;
}
static const struct meson8b_dwmac_data meson8b_dwmac_data = {
.set_phy_mode = meson8b_set_phy_mode,
};
static const struct meson8b_dwmac_data meson_axg_dwmac_data = {
.set_phy_mode = meson_axg_set_phy_mode,
};
static const struct of_device_id meson8b_dwmac_match[] = {
{
.compatible = "amlogic,meson8b-dwmac",
.data = &meson8b_dwmac_data,
},
{
.compatible = "amlogic,meson8m2-dwmac",
.data = &meson8b_dwmac_data,
},
{
.compatible = "amlogic,meson-gxbb-dwmac",
.data = &meson8b_dwmac_data,
},
{
.compatible = "amlogic,meson-axg-dwmac",
.data = &meson_axg_dwmac_data,
},
{ }
};
MODULE_DEVICE_TABLE(of, meson8b_dwmac_match);
static struct platform_driver meson8b_dwmac_driver = {
.probe = meson8b_dwmac_probe,
.remove = stmmac_pltfr_remove,
.driver = {
.name = "meson8b-dwmac",
.pm = &stmmac_pltfr_pm_ops,
.of_match_table = meson8b_dwmac_match,
},
};
module_platform_driver(meson8b_dwmac_driver);
MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
MODULE_DESCRIPTION("Amlogic Meson8b, Meson8m2 and GXBB DWMAC glue layer");
MODULE_LICENSE("GPL v2");