diff --git a/MAINTAINERS b/MAINTAINERS
index 141c222..c3c5842 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1889,6 +1889,11 @@
 W:	http://www.atnf.csiro.au/~rgooch/linux/kernel-patches.html
 S:	Maintained
 
+MULTIMEDIA CARD SUBSYSTEM
+P:	Russell King
+M:	rmk+mmc@arm.linux.org.uk
+S:	Maintained
+
 MULTISOUND SOUND DRIVER
 P:	Andrew Veliath
 M:	andrewtv@usa.net
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 5d3acff..d22f38b 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -101,7 +101,7 @@
 	help
 	  Choice for UART for kernel low-level using S3C2410 UARTS,
 	  should be between zero and two. The port must have been
-	  initalised by the boot-loader before use.
+	  initialised by the boot-loader before use.
 
 	  The uncompressor code port configuration is now handled
 	  by CONFIG_S3C2410_LOWLEVEL_UART_PORT.
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 2a39f9e..3b23f43 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -141,7 +141,7 @@
           2) If > 64MB of memory space is required, the IXP4xx can be 
 	     configured to use indirect registers to access PCI This allows 
 	     for up to 128MB (0x48000000 to 0x4fffffff) of memory on the bus. 
-	     The disadvantadge of this is that every PCI access requires 
+	     The disadvantage of this is that every PCI access requires 
 	     three local register accesses plus a spinlock, but in some 
 	     cases the performance hit is acceptable. In addition, you cannot 
 	     mmap() PCI devices in this case due to the indirect nature
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 02e188d..b307f11 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -493,6 +493,7 @@
 MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
 	/* Maintainer: MontaVista Software Inc. */
 	.phys_io	= 0x40000000,
+	.boot_params	= 0xa0000100,	/* BLOB boot parameter setting */
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io		= mainstone_map_io,
 	.init_irq	= mainstone_init_irq,
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index ce7d810..970f98d 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -170,7 +170,7 @@
 	depends on ARCH_S3C2410 && PM
 	help
 	  Say Y here if you want verbose debugging from the PM Suspend and
-	  Resume code. See `Documentation/arm/Samsing-S3C24XX/Suspend.txt`
+	  Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
 	  for more information.
 
 config S3C2410_PM_CHECK
diff --git a/arch/mips/au1000/common/prom.c b/arch/mips/au1000/common/prom.c
index 9c171af..ae7d8c57bf 100644
--- a/arch/mips/au1000/common/prom.c
+++ b/arch/mips/au1000/common/prom.c
@@ -1,10 +1,9 @@
 /*
  *
  * BRIEF MODULE DESCRIPTION
- *    PROM library initialisation code, assuming a version of
- *    pmon is the boot code.
+ *    PROM library initialisation code, assuming YAMON is the boot loader.
  *
- * Copyright 2000,2001 MontaVista Software Inc.
+ * Copyright 2000, 2001, 2006 MontaVista Software Inc.
  * Author: MontaVista Software, Inc.
  *         	ppopov@mvista.com or source@mvista.com
  *
@@ -49,9 +48,9 @@
 
 typedef struct
 {
-    char *name;
-/*    char *val; */
-}t_env_var;
+	char *name;
+	char *val;
+} t_env_var;
 
 
 char * prom_getcmdline(void)
@@ -85,21 +84,16 @@
 {
 	/*
 	 * Return a pointer to the given environment variable.
-	 * Environment variables are stored in the form of "memsize=64".
 	 */
 
 	t_env_var *env = (t_env_var *)prom_envp;
-	int i;
 
-	i = strlen(envname);
-
-	while(env->name) {
-		if(strncmp(envname, env->name, i) == 0) {
-			return(env->name + strlen(envname) + 1);
-		}
+	while (env->name) {
+		if (strcmp(envname, env->name) == 0)
+			return env->val;
 		env++;
 	}
-	return(NULL);
+	return NULL;
 }
 
 inline unsigned char str2hexnum(unsigned char c)
diff --git a/arch/mips/au1000/common/sleeper.S b/arch/mips/au1000/common/sleeper.S
index 44dac3b..683d9da 100644
--- a/arch/mips/au1000/common/sleeper.S
+++ b/arch/mips/au1000/common/sleeper.S
@@ -112,6 +112,11 @@
 	mtc0	k0, CP0_PAGEMASK
 	lw	k0, 0x14(sp)
 	mtc0	k0, CP0_CONFIG
+
+	/* We need to catch the ealry Alchemy SOCs with
+	 * the write-only Config[OD] bit and set it back to one...
+	 */
+	jal	au1x00_fixup_config_od
 	lw	$1, PT_R1(sp)
 	lw	$2, PT_R2(sp)
 	lw	$3, PT_R3(sp)
diff --git a/arch/mips/ddb5xxx/ddb5476/dbg_io.c b/arch/mips/ddb5xxx/ddb5476/dbg_io.c
index 85e9e50..f2296a9 100644
--- a/arch/mips/ddb5xxx/ddb5476/dbg_io.c
+++ b/arch/mips/ddb5xxx/ddb5476/dbg_io.c
@@ -86,7 +86,7 @@
         /* disable interrupts */
         UART16550_WRITE(OFS_INTR_ENABLE, 0);
 
-        /* set up buad rate */
+        /* set up baud rate */
         {
                 uint32 divisor;
 
diff --git a/arch/mips/ddb5xxx/ddb5477/kgdb_io.c b/arch/mips/ddb5xxx/ddb5477/kgdb_io.c
index 1d18d59..385bbdb 100644
--- a/arch/mips/ddb5xxx/ddb5477/kgdb_io.c
+++ b/arch/mips/ddb5xxx/ddb5477/kgdb_io.c
@@ -86,7 +86,7 @@
         /* disable interrupts */
         UART16550_WRITE(OFS_INTR_ENABLE, 0);
 
-        /* set up buad rate */
+        /* set up baud rate */
         {
                 uint32 divisor;
 
diff --git a/arch/mips/gt64120/ev64120/serialGT.c b/arch/mips/gt64120/ev64120/serialGT.c
index 16e34a5..8f0d835 100644
--- a/arch/mips/gt64120/ev64120/serialGT.c
+++ b/arch/mips/gt64120/ev64120/serialGT.c
@@ -149,7 +149,7 @@
 #else
 	/*
 	 * Note: Set baud rate, hardcoded here for rate of 115200
-	 * since became unsure of above "buad rate" algorithm (??).
+	 * since became unsure of above "baud rate" algorithm (??).
 	 */
 	outreg(channel, LCR, 0x83);
 	outreg(channel, DLM, 0x00);	// See note above
diff --git a/arch/mips/gt64120/momenco_ocelot/dbg_io.c b/arch/mips/gt64120/momenco_ocelot/dbg_io.c
index 8720bcc..f0a6a38 100644
--- a/arch/mips/gt64120/momenco_ocelot/dbg_io.c
+++ b/arch/mips/gt64120/momenco_ocelot/dbg_io.c
@@ -73,7 +73,7 @@
 	/* disable interrupts */
 	UART16550_WRITE(OFS_INTR_ENABLE, 0);
 
-	/* set up buad rate */
+	/* set up baud rate */
 	{
 		uint32 divisor;
 
diff --git a/arch/mips/ite-boards/generic/dbg_io.c b/arch/mips/ite-boards/generic/dbg_io.c
index c4f8530..6a7ccaf 100644
--- a/arch/mips/ite-boards/generic/dbg_io.c
+++ b/arch/mips/ite-boards/generic/dbg_io.c
@@ -72,7 +72,7 @@
 	/* disable interrupts */
 	UART16550_WRITE(OFS_INTR_ENABLE, 0);
 
-	/* set up buad rate */
+	/* set up baud rate */
 	{
 		uint32 divisor;
 
diff --git a/arch/mips/kernel/cpu-bugs64.c b/arch/mips/kernel/cpu-bugs64.c
index 47a087b..d268827 100644
--- a/arch/mips/kernel/cpu-bugs64.c
+++ b/arch/mips/kernel/cpu-bugs64.c
@@ -206,7 +206,7 @@
 		"daddi	%0, %1, %3\n\t"
 		".set	pop"
 		: "=r" (v), "=&r" (tmp)
-		: "I" (0xffffffffffffdb9a), "I" (0x1234));
+		: "I" (0xffffffffffffdb9aUL), "I" (0x1234));
 	set_except_vector(12, handler);
 	local_irq_restore(flags);
 
@@ -224,7 +224,7 @@
 		"dsrl	%1, %1, 1\n\t"
 		"daddi	%0, %1, %3"
 		: "=r" (v), "=&r" (tmp)
-		: "I" (0xffffffffffffdb9a), "I" (0x1234));
+		: "I" (0xffffffffffffdb9aUL), "I" (0x1234));
 	set_except_vector(12, handler);
 	local_irq_restore(flags);
 
@@ -280,7 +280,7 @@
 		"daddu	%1, %2\n\t"
 		".set	pop"
 		: "=&r" (v), "=&r" (w), "=&r" (tmp)
-		: "I" (0xffffffffffffdb9a), "I" (0x1234));
+		: "I" (0xffffffffffffdb9aUL), "I" (0x1234));
 
 	if (v == w) {
 		printk("no.\n");
@@ -296,7 +296,7 @@
 		"addiu	%1, $0, %4\n\t"
 		"daddu	%1, %2"
 		: "=&r" (v), "=&r" (w), "=&r" (tmp)
-		: "I" (0xffffffffffffdb9a), "I" (0x1234));
+		: "I" (0xffffffffffffdb9aUL), "I" (0x1234));
 
 	if (v == w) {
 		printk("yes.\n");
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index bef3e2d..8c2c359 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -655,7 +655,7 @@
 	case PRID_IMP_SB1:
 		c->cputype = CPU_SB1;
 		/* FPU in pass1 is known to have issues. */
-		if ((c->processor_id & 0xff) < 0x20)
+		if ((c->processor_id & 0xff) < 0x02)
 			c->options &= ~(MIPS_CPU_FPU | MIPS_CPU_32FPR);
 		break;
 	case PRID_IMP_SB1A:
diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c
index e54a7f4..d7bf021 100644
--- a/arch/mips/kernel/module.c
+++ b/arch/mips/kernel/module.c
@@ -288,6 +288,9 @@
 		sym = (Elf_Sym *)sechdrs[symindex].sh_addr
 			+ ELF_MIPS_R_SYM(rel[i]);
 		if (!sym->st_value) {
+			/* Ignore unresolved weak symbol */
+			if (ELF_ST_BIND(sym->st_info) == STB_WEAK)
+				continue;
 			printk(KERN_WARNING "%s: Unknown symbol %s\n",
 			       me->name, strtab + sym->st_name);
 			return -ENOENT;
@@ -325,6 +328,9 @@
 		sym = (Elf_Sym *)sechdrs[symindex].sh_addr
 			+ ELF_MIPS_R_SYM(rel[i]);
 		if (!sym->st_value) {
+			/* Ignore unresolved weak symbol */
+			if (ELF_ST_BIND(sym->st_info) == STB_WEAK)
+				continue;
 			printk(KERN_WARNING "%s: Unknown symbol %s\n",
 			       me->name, strtab + sym->st_name);
 			return -ENOENT;
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index b53a920..8efb23a 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -209,7 +209,7 @@
 	PTR	sys_fork
 	PTR	sys_read
 	PTR	sys_write
-	PTR	sys_open			/* 4005 */
+	PTR	compat_sys_open			/* 4005 */
 	PTR	sys_close
 	PTR	sys_waitpid
 	PTR	sys_creat
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index bcf1b10..397a70e 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -246,7 +246,7 @@
 #ifdef CONFIG_64BIT
 	/* HACK: Guess if the sign extension was forgotten */
 	if (start > 0x0000000080000000 && start < 0x00000000ffffffff)
-		start |= 0xffffffff00000000;
+		start |= 0xffffffff00000000UL;
 #endif
 
 	end = start + size;
@@ -355,8 +355,6 @@
 	}
 #endif
 
-	memory_present(0, first_usable_pfn, max_low_pfn);
-
 	/* Initialize the boot-time allocator with low memory only.  */
 	bootmap_size = init_bootmem(first_usable_pfn, max_low_pfn);
 
@@ -410,6 +408,7 @@
 
 		/* Register lowmem ranges */
 		free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(size));
+		memory_present(0, curr_pfn, curr_pfn + size - 1);
 	}
 
 	/* Reserve the bootmap memory.  */
@@ -419,17 +418,20 @@
 #ifdef CONFIG_BLK_DEV_INITRD
 	initrd_below_start_ok = 1;
 	if (initrd_start) {
-		unsigned long initrd_size = ((unsigned char *)initrd_end) - ((unsigned char *)initrd_start);
+		unsigned long initrd_size = ((unsigned char *)initrd_end) -
+			((unsigned char *)initrd_start);
+		const int width = sizeof(long) * 2;
+
 		printk("Initial ramdisk at: 0x%p (%lu bytes)\n",
 		       (void *)initrd_start, initrd_size);
 
 		if (CPHYSADDR(initrd_end) > PFN_PHYS(max_low_pfn)) {
 			printk("initrd extends beyond end of memory "
 			       "(0x%0*Lx > 0x%0*Lx)\ndisabling initrd\n",
-			       sizeof(long) * 2,
-			       (unsigned long long)CPHYSADDR(initrd_end),
-			       sizeof(long) * 2,
-			       (unsigned long long)PFN_PHYS(max_low_pfn));
+			       width,
+			       (unsigned long long) CPHYSADDR(initrd_end),
+			       width,
+			       (unsigned long long) PFN_PHYS(max_low_pfn));
 			initrd_start = initrd_end = 0;
 			initrd_reserve_bootmem = 0;
 		}
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index d42f358..298f82f 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -247,6 +247,9 @@
 	current_thread_info()->cpu = 0;
 	smp_tune_scheduling();
 	plat_prepare_cpus(max_cpus);
+#ifndef CONFIG_HOTPLUG_CPU
+	cpu_present_map = cpu_possible_map;
+#endif
 }
 
 /* preload SMP state for boot cpu */
@@ -442,7 +445,7 @@
 	int cpu;
 	int ret;
 
-	for_each_cpu(cpu) {
+	for_each_present_cpu(cpu) {
 		ret = register_cpu(&per_cpu(cpu_devices, cpu), cpu, NULL);
 		if (ret)
 			printk(KERN_WARNING "topology_init: register_cpu %d "
diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c
index 8f4fdd9..5e8a18a 100644
--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@@ -276,8 +276,7 @@
 
 asmlinkage int _sys_sysmips(int cmd, long arg1, int arg2, int arg3)
 {
-	int	tmp, len;
-	char	__user *name;
+	int	tmp;
 
 	switch(cmd) {
 	case MIPS_ATOMIC_SET:
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 35cb08d..a7564b0 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -819,15 +819,30 @@
 
 asmlinkage void do_mcheck(struct pt_regs *regs)
 {
+	const int field = 2 * sizeof(unsigned long);
+	int multi_match = regs->cp0_status & ST0_TS;
+
 	show_regs(regs);
-	dump_tlb_all();
+
+	if (multi_match) {
+		printk("Index   : %0x\n", read_c0_index());
+		printk("Pagemask: %0x\n", read_c0_pagemask());
+		printk("EntryHi : %0*lx\n", field, read_c0_entryhi());
+		printk("EntryLo0: %0*lx\n", field, read_c0_entrylo0());
+		printk("EntryLo1: %0*lx\n", field, read_c0_entrylo1());
+		printk("\n");
+		dump_tlb_all();
+	}
+
+	show_code((unsigned int *) regs->cp0_epc);
+
 	/*
 	 * Some chips may have other causes of machine check (e.g. SB1
 	 * graduation timer)
 	 */
 	panic("Caught Machine Check exception - %scaused by multiple "
 	      "matching entries in the TLB.",
-	      (regs->cp0_status & ST0_TS) ? "" : "not ");
+	      (multi_match) ? "" : "not ");
 }
 
 asmlinkage void do_mt(struct pt_regs *regs)
diff --git a/arch/mips/math-emu/dp_fint.c b/arch/mips/math-emu/dp_fint.c
index a1962eb..39a71de1 100644
--- a/arch/mips/math-emu/dp_fint.c
+++ b/arch/mips/math-emu/dp_fint.c
@@ -29,7 +29,9 @@
 
 ieee754dp ieee754dp_fint(int x)
 {
-	COMPXDP;
+	u64 xm;
+	int xe;
+	int xs;
 
 	CLEARCX;
 
diff --git a/arch/mips/math-emu/dp_flong.c b/arch/mips/math-emu/dp_flong.c
index eae90a8..f08f223 100644
--- a/arch/mips/math-emu/dp_flong.c
+++ b/arch/mips/math-emu/dp_flong.c
@@ -29,7 +29,9 @@
 
 ieee754dp ieee754dp_flong(s64 x)
 {
-	COMPXDP;
+	u64 xm;
+	int xe;
+	int xs;
 
 	CLEARCX;
 
diff --git a/arch/mips/math-emu/sp_fint.c b/arch/mips/math-emu/sp_fint.c
index 7aac13a..e88e125 100644
--- a/arch/mips/math-emu/sp_fint.c
+++ b/arch/mips/math-emu/sp_fint.c
@@ -29,7 +29,9 @@
 
 ieee754sp ieee754sp_fint(int x)
 {
-	COMPXSP;
+	unsigned xm;
+	int xe;
+	int xs;
 
 	CLEARCX;
 
diff --git a/arch/mips/math-emu/sp_flong.c b/arch/mips/math-emu/sp_flong.c
index 3d6c1d1..26d6919 100644
--- a/arch/mips/math-emu/sp_flong.c
+++ b/arch/mips/math-emu/sp_flong.c
@@ -29,7 +29,9 @@
 
 ieee754sp ieee754sp_flong(s64 x)
 {
-	COMPXDP;		/* <--- need 64-bit mantissa temp */
+	u64 xm;		/* <--- need 64-bit mantissa temp */
+	int xe;
+	int xs;
 
 	CLEARCX;
 
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 6b35417..4a43924 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -1161,6 +1161,31 @@
 	c->options |= MIPS_CPU_SUBSET_CACHES;
 }
 
+void au1x00_fixup_config_od(void)
+{
+	/*
+	 * c0_config.od (bit 19) was write only (and read as 0)
+	 * on the early revisions of Alchemy SOCs.  It disables the bus
+	 * transaction overlapping and needs to be set to fix various errata.
+	 */
+	switch (read_c0_prid()) {
+	case 0x00030100: /* Au1000 DA */
+	case 0x00030201: /* Au1000 HA */
+	case 0x00030202: /* Au1000 HB */
+	case 0x01030200: /* Au1500 AB */
+	/*
+	 * Au1100 errata actually keeps silence about this bit, so we set it
+	 * just in case for those revisions that require it to be set according
+	 * to arch/mips/au1000/common/cputable.c
+	 */
+	case 0x02030200: /* Au1100 AB */
+	case 0x02030201: /* Au1100 BA */
+	case 0x02030202: /* Au1100 BC */
+		set_c0_config(1 << 19);
+		break;
+	}
+}
+
 static inline void coherency_setup(void)
 {
 	change_c0_config(CONF_CM_CMASK, CONF_CM_DEFAULT);
@@ -1181,6 +1206,15 @@
 	case CPU_R4400MC:
 		clear_c0_config(CONF_CU);
 		break;
+	/*
+	 * We need to catch the ealry Alchemy SOCs with
+	 * the write-only co_config.od bit and set it back to one...
+	 */
+	case CPU_AU1000: /* rev. DA, HA, HB */
+	case CPU_AU1100: /* rev. AB, BA, BC ?? */
+	case CPU_AU1500: /* rev. AB */
+		au1x00_fixup_config_od();
+		break;
 	}
 }
 
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index c22308b9..33f6e1c 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -227,7 +227,7 @@
 	for (tmp = 0; tmp < max_low_pfn; tmp++)
 		if (page_is_ram(tmp)) {
 			ram++;
-			if (PageReserved(mem_map+tmp))
+			if (PageReserved(pfn_to_page(tmp)))
 				reservedpages++;
 		}
 
diff --git a/arch/mips/momentum/jaguar_atx/dbg_io.c b/arch/mips/momentum/jaguar_atx/dbg_io.c
index 542eac8..d7dea0a 100644
--- a/arch/mips/momentum/jaguar_atx/dbg_io.c
+++ b/arch/mips/momentum/jaguar_atx/dbg_io.c
@@ -73,7 +73,7 @@
 	/* disable interrupts */
 	UART16550_WRITE(OFS_INTR_ENABLE, 0);
 
-	/* set up buad rate */
+	/* set up baud rate */
 	{
 		uint32 divisor;
 
diff --git a/arch/mips/momentum/ocelot_c/dbg_io.c b/arch/mips/momentum/ocelot_c/dbg_io.c
index 8720bcc..f0a6a38 100644
--- a/arch/mips/momentum/ocelot_c/dbg_io.c
+++ b/arch/mips/momentum/ocelot_c/dbg_io.c
@@ -73,7 +73,7 @@
 	/* disable interrupts */
 	UART16550_WRITE(OFS_INTR_ENABLE, 0);
 
-	/* set up buad rate */
+	/* set up baud rate */
 	{
 		uint32 divisor;
 
diff --git a/arch/mips/momentum/ocelot_g/dbg_io.c b/arch/mips/momentum/ocelot_g/dbg_io.c
index 8720bcc..f0a6a38 100644
--- a/arch/mips/momentum/ocelot_g/dbg_io.c
+++ b/arch/mips/momentum/ocelot_g/dbg_io.c
@@ -73,7 +73,7 @@
 	/* disable interrupts */
 	UART16550_WRITE(OFS_INTR_ENABLE, 0);
 
-	/* set up buad rate */
+	/* set up baud rate */
 	{
 		uint32 divisor;
 
diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c
index 91b799d..c31e4cf 100644
--- a/arch/mips/oprofile/common.c
+++ b/arch/mips/oprofile/common.c
@@ -14,8 +14,8 @@
 
 #include "op_impl.h"
 
-extern struct op_mips_model op_model_mipsxx __attribute__((weak));
-extern struct op_mips_model op_model_rm9000 __attribute__((weak));
+extern struct op_mips_model op_model_mipsxx_ops __attribute__((weak));
+extern struct op_mips_model op_model_rm9000_ops __attribute__((weak));
 
 static struct op_mips_model *model;
 
@@ -83,11 +83,11 @@
 	case CPU_74K:
 	case CPU_SB1:
 	case CPU_SB1A:
-		lmodel = &op_model_mipsxx;
+		lmodel = &op_model_mipsxx_ops;
 		break;
 
 	case CPU_RM9000:
-		lmodel = &op_model_rm9000;
+		lmodel = &op_model_rm9000_ops;
 		break;
 	};
 
diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c
index e7ce923..f26a00e 100644
--- a/arch/mips/oprofile/op_model_mipsxx.c
+++ b/arch/mips/oprofile/op_model_mipsxx.c
@@ -23,7 +23,7 @@
 
 #define M_COUNTER_OVERFLOW		(1UL    << 31)
 
-struct op_mips_model op_model_mipsxx;
+struct op_mips_model op_model_mipsxx_ops;
 
 static struct mipsxx_register_config {
 	unsigned int control[4];
@@ -34,7 +34,7 @@
 
 static void mipsxx_reg_setup(struct op_counter_config *ctr)
 {
-	unsigned int counters = op_model_mipsxx.num_counters;
+	unsigned int counters = op_model_mipsxx_ops.num_counters;
 	int i;
 
 	/* Compute the performance counter control word.  */
@@ -62,7 +62,7 @@
 
 static void mipsxx_cpu_setup (void *args)
 {
-	unsigned int counters = op_model_mipsxx.num_counters;
+	unsigned int counters = op_model_mipsxx_ops.num_counters;
 
 	switch (counters) {
 	case 4:
@@ -83,7 +83,7 @@
 /* Start all counters on current CPU */
 static void mipsxx_cpu_start(void *args)
 {
-	unsigned int counters = op_model_mipsxx.num_counters;
+	unsigned int counters = op_model_mipsxx_ops.num_counters;
 
 	switch (counters) {
 	case 4:
@@ -100,7 +100,7 @@
 /* Stop all counters on current CPU */
 static void mipsxx_cpu_stop(void *args)
 {
-	unsigned int counters = op_model_mipsxx.num_counters;
+	unsigned int counters = op_model_mipsxx_ops.num_counters;
 
 	switch (counters) {
 	case 4:
@@ -116,7 +116,7 @@
 
 static int mipsxx_perfcount_handler(struct pt_regs *regs)
 {
-	unsigned int counters = op_model_mipsxx.num_counters;
+	unsigned int counters = op_model_mipsxx_ops.num_counters;
 	unsigned int control;
 	unsigned int counter;
 	int handled = 0;
@@ -187,37 +187,37 @@
 
 	reset_counters(counters);
 
-	op_model_mipsxx.num_counters = counters;
+	op_model_mipsxx_ops.num_counters = counters;
 	switch (current_cpu_data.cputype) {
 	case CPU_20KC:
-		op_model_mipsxx.cpu_type = "mips/20K";
+		op_model_mipsxx_ops.cpu_type = "mips/20K";
 		break;
 
 	case CPU_24K:
-		op_model_mipsxx.cpu_type = "mips/24K";
+		op_model_mipsxx_ops.cpu_type = "mips/24K";
 		break;
 
 	case CPU_25KF:
-		op_model_mipsxx.cpu_type = "mips/25K";
+		op_model_mipsxx_ops.cpu_type = "mips/25K";
 		break;
 
 #ifndef CONFIG_SMP
 	case CPU_34K:
-		op_model_mipsxx.cpu_type = "mips/34K";
+		op_model_mipsxx_ops.cpu_type = "mips/34K";
 		break;
 
 	case CPU_74K:
-		op_model_mipsxx.cpu_type = "mips/74K";
+		op_model_mipsxx_ops.cpu_type = "mips/74K";
 		break;
 #endif
 
 	case CPU_5KC:
-		op_model_mipsxx.cpu_type = "mips/5K";
+		op_model_mipsxx_ops.cpu_type = "mips/5K";
 		break;
 
 	case CPU_SB1:
 	case CPU_SB1A:
-		op_model_mipsxx.cpu_type = "mips/sb1";
+		op_model_mipsxx_ops.cpu_type = "mips/sb1";
 		break;
 
 	default:
@@ -233,12 +233,12 @@
 
 static void mipsxx_exit(void)
 {
-	reset_counters(op_model_mipsxx.num_counters);
+	reset_counters(op_model_mipsxx_ops.num_counters);
 
 	perf_irq = null_perf_irq;
 }
 
-struct op_mips_model op_model_mipsxx = {
+struct op_mips_model op_model_mipsxx_ops = {
 	.reg_setup	= mipsxx_reg_setup,
 	.cpu_setup	= mipsxx_cpu_setup,
 	.init		= mipsxx_init,
diff --git a/arch/mips/oprofile/op_model_rm9000.c b/arch/mips/oprofile/op_model_rm9000.c
index 9b75e41..b7063fe 100644
--- a/arch/mips/oprofile/op_model_rm9000.c
+++ b/arch/mips/oprofile/op_model_rm9000.c
@@ -126,7 +126,7 @@
 	free_irq(rm9000_perfcount_irq, NULL);
 }
 
-struct op_mips_model op_model_rm9000 = {
+struct op_mips_model op_model_rm9000_ops = {
 	.reg_setup	= rm9000_reg_setup,
 	.cpu_setup	= rm9000_cpu_setup,
 	.init		= rm9000_init,
diff --git a/arch/mips/sgi-ip32/ip32-irq.c b/arch/mips/sgi-ip32/ip32-irq.c
index de01c98..8ba0804 100644
--- a/arch/mips/sgi-ip32/ip32-irq.c
+++ b/arch/mips/sgi-ip32/ip32-irq.c
@@ -31,12 +31,12 @@
 /* issue a PIO read to make sure no PIO writes are pending */
 static void inline flush_crime_bus(void)
 {
-	volatile unsigned long junk = crime->control;
+	crime->control;
 }
 
 static void inline flush_mace_bus(void)
 {
-	volatile unsigned long junk = mace->perif.ctrl.misc;
+	mace->perif.ctrl.misc;
 }
 
 #undef DEBUG_IRQ
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index 003b077..45bcf09 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -84,7 +84,7 @@
 
 config MMC_AU1X
 	tristate "Alchemy AU1XX0 MMC Card Interface support"
-	depends on SOC_AU1X00 && MMC
+	depends on MMC && SOC_AU1200
 	help
 	  This selects the AMD Alchemy(R) Multimedia card interface.
 	  If you have a Alchemy platform with a MMC slot, say Y or M here.
diff --git a/include/asm-arm/arch-l7200/serial_l7200.h b/include/asm-arm/arch-l7200/serial_l7200.h
index 238c595..b1008a9 100644
--- a/include/asm-arm/arch-l7200/serial_l7200.h
+++ b/include/asm-arm/arch-l7200/serial_l7200.h
@@ -28,7 +28,7 @@
 #define UARTDR			0x00	/* Tx/Rx data */
 #define RXSTAT			0x04	/* Rx status */
 #define H_UBRLCR		0x08	/* mode register high */
-#define M_UBRLCR		0x0C	/* mode reg mid (MSB of buad)*/
+#define M_UBRLCR		0x0C	/* mode reg mid (MSB of baud)*/
 #define L_UBRLCR		0x10	/* mode reg low (LSB of baud)*/
 #define UARTCON			0x14	/* control register */
 #define UARTFLG			0x18	/* flag register */
diff --git a/include/asm-arm/arch-l7200/uncompress.h b/include/asm-arm/arch-l7200/uncompress.h
index 9fcd40a..04be2a0 100644
--- a/include/asm-arm/arch-l7200/uncompress.h
+++ b/include/asm-arm/arch-l7200/uncompress.h
@@ -6,7 +6,7 @@
  * Changelog:
  *  05-01-2000	SJH	Created
  *  05-13-2000	SJH	Filled in function bodies
- *  07-26-2000	SJH	Removed hard coded buad rate
+ *  07-26-2000	SJH	Removed hard coded baud rate
  */
 
 #include <asm/hardware.h>
diff --git a/include/asm-mips/addrspace.h b/include/asm-mips/addrspace.h
index 42520cc..1386af1 100644
--- a/include/asm-mips/addrspace.h
+++ b/include/asm-mips/addrspace.h
@@ -129,6 +129,7 @@
 #if defined (CONFIG_CPU_R4300)						\
     || defined (CONFIG_CPU_R4X00)					\
     || defined (CONFIG_CPU_R5000)					\
+    || defined (CONFIG_CPU_RM7000)					\
     || defined (CONFIG_CPU_NEVADA)					\
     || defined (CONFIG_CPU_TX49XX)					\
     || defined (CONFIG_CPU_MIPS64)
diff --git a/include/asm-mips/delay.h b/include/asm-mips/delay.h
index 64dd4515..928f30f 100644
--- a/include/asm-mips/delay.h
+++ b/include/asm-mips/delay.h
@@ -19,20 +19,22 @@
 {
 	if (sizeof(long) == 4)
 		__asm__ __volatile__ (
-		".set\tnoreorder\n"
-		"1:\tbnez\t%0,1b\n\t"
-		"subu\t%0,1\n\t"
-		".set\treorder"
+		"	.set	noreorder				\n"
+		"	.align	3					\n"
+		"1:	bnez	%0, 1b					\n"
+		"	subu	%0, 1					\n"
+		"	.set	reorder					\n"
 		: "=r" (loops)
 		: "0" (loops));
 	else if (sizeof(long) == 8)
 		__asm__ __volatile__ (
-		".set\tnoreorder\n"
-		"1:\tbnez\t%0,1b\n\t"
-		"dsubu\t%0,1\n\t"
-		".set\treorder"
-		:"=r" (loops)
-		:"0" (loops));
+		"	.set	noreorder				\n"
+		"	.align	3					\n"
+		"1:	bnez	%0, 1b					\n"
+		"	dsubu	%0, 1					\n"
+		"	.set	reorder					\n"
+		: "=r" (loops)
+		: "0" (loops));
 }
 
 
diff --git a/include/asm-mips/page.h b/include/asm-mips/page.h
index a1eab13..4035ec7 100644
--- a/include/asm-mips/page.h
+++ b/include/asm-mips/page.h
@@ -139,9 +139,11 @@
 
 #define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
 
+#ifndef CONFIG_SPARSEMEM
 #ifndef CONFIG_NEED_MULTIPLE_NODES
 #define pfn_valid(pfn)		((pfn) < max_mapnr)
 #endif
+#endif
 
 #define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
 #define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
diff --git a/include/asm-mips/pgtable-32.h b/include/asm-mips/pgtable-32.h
index 4d6bc45..087c207 100644
--- a/include/asm-mips/pgtable-32.h
+++ b/include/asm-mips/pgtable-32.h
@@ -177,48 +177,67 @@
 	((swp_entry_t) { ((type) << 10) | ((offset) << 15) })
 
 /*
- * Bits 0, 1, 2, 9 and 10 are taken, split up the 27 bits of offset
- * into this range:
+ * Bits 0, 4, 8, and 9 are taken, split up 28 bits of offset into this range:
  */
-#define PTE_FILE_MAX_BITS	27
+#define PTE_FILE_MAX_BITS	28
 
-#define pte_to_pgoff(_pte) \
-	((((_pte).pte >> 3) & 0x3f ) + (((_pte).pte >> 11) << 8 ))
+#define pte_to_pgoff(_pte)	((((_pte).pte >> 1 ) & 0x07) | \
+				 (((_pte).pte >> 2 ) & 0x38) | \
+				 (((_pte).pte >> 10) <<  6 ))
 
-#define pgoff_to_pte(off) \
-	((pte_t) { (((off) & 0x3f) << 3) + (((off) >> 8) << 11) + _PAGE_FILE })
+#define pgoff_to_pte(off)	((pte_t) { (((off) & 0x07) << 1 ) | \
+					   (((off) & 0x38) << 2 ) | \
+					   (((off) >>  6 ) << 10) | \
+					   _PAGE_FILE })
 
 #else
 
 /* Swap entries must have VALID and GLOBAL bits cleared. */
-#define __swp_type(x)		(((x).val >> 8) & 0x1f)
-#define __swp_offset(x)		((x).val >> 13)
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#define __swp_type(x)		(((x).val >> 2) & 0x1f)
+#define __swp_offset(x) 	 ((x).val >> 7)
 #define __swp_entry(type,offset)	\
-		((swp_entry_t) { ((type) << 8) | ((offset) << 13) })
+		((swp_entry_t)  { ((type) << 2) | ((offset) << 7) })
+#else
+#define __swp_type(x)		(((x).val >> 8) & 0x1f)
+#define __swp_offset(x) 	 ((x).val >> 13)
+#define __swp_entry(type,offset)	\
+		((swp_entry_t)  { ((type) << 8) | ((offset) << 13) })
+#endif /* defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) */
 
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
 /*
- * Bits 0, 1, 2, 7 and 8 are taken, split up the 27 bits of offset
- * into this range:
+ * Bits 0 and 1 of pte_high are taken, use the rest for the page offset...
  */
-#define PTE_FILE_MAX_BITS	27
+#define PTE_FILE_MAX_BITS	30
 
-#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1)
-	/* fixme */
-#define pte_to_pgoff(_pte) (((_pte).pte_high >> 6) + ((_pte).pte_high & 0x3f))
-#define pgoff_to_pte(off) \
-	((pte_t){(((off) & 0x3f) + ((off) << 6) + _PAGE_FILE)})
+#define pte_to_pgoff(_pte)	((_pte).pte_high >> 2)
+#define pgoff_to_pte(off) 	((pte_t) { _PAGE_FILE, (off) << 2 })
 
 #else
-#define pte_to_pgoff(_pte) \
-	((((_pte).pte >> 3) & 0x1f ) + (((_pte).pte >> 9) << 6 ))
+/*
+ * Bits 0, 4, 6, and 7 are taken, split up 28 bits of offset into this range:
+ */
+#define PTE_FILE_MAX_BITS	28
 
-#define pgoff_to_pte(off) \
-	((pte_t) { (((off) & 0x1f) << 3) + (((off) >> 6) << 9) + _PAGE_FILE })
+#define pte_to_pgoff(_pte)	((((_pte).pte >> 1) & 0x7) | \
+				 (((_pte).pte >> 2) & 0x8) | \
+				 (((_pte).pte >> 8) <<  4))
+
+#define pgoff_to_pte(off)	((pte_t) { (((off) & 0x7) << 1) | \
+					   (((off) & 0x8) << 2) | \
+					   (((off) >>  4) << 8) | \
+					   _PAGE_FILE })
 #endif
 
 #endif
 
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { (pte).pte_high })
+#define __swp_entry_to_pte(x)	((pte_t) { 0, (x).val })
+#else
 #define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
 #define __swp_entry_to_pte(x)	((pte_t) { (x).val })
+#endif
 
 #endif /* _ASM_PGTABLE_32_H */
diff --git a/include/asm-mips/pgtable-64.h b/include/asm-mips/pgtable-64.h
index 82166b2..2faf5c9 100644
--- a/include/asm-mips/pgtable-64.h
+++ b/include/asm-mips/pgtable-64.h
@@ -224,15 +224,12 @@
 #define __swp_entry_to_pte(x)	((pte_t) { (x).val })
 
 /*
- * Bits 0, 1, 2, 7 and 8 are taken, split up the 32 bits of offset
- * into this range:
+ * Bits 0, 4, 6, and 7 are taken. Let's leave bits 1, 2, 3, and 5 alone to
+ * make things easier, and only use the upper 56 bits for the page offset...
  */
-#define PTE_FILE_MAX_BITS	32
+#define PTE_FILE_MAX_BITS	56
 
-#define pte_to_pgoff(_pte) \
-	((((_pte).pte >> 3) & 0x1f ) + (((_pte).pte >> 9) << 6 ))
-
-#define pgoff_to_pte(off) \
-	((pte_t) { (((off) & 0x1f) << 3) + (((off) >> 6) << 9) + _PAGE_FILE })
+#define pte_to_pgoff(_pte)	((_pte).pte >> 8)
+#define pgoff_to_pte(off)	((pte_t) { ((off) << 8) | _PAGE_FILE })
 
 #endif /* _ASM_PGTABLE_64_H */
diff --git a/include/asm-mips/pgtable.h b/include/asm-mips/pgtable.h
index f80fe75..d0af2a3 100644
--- a/include/asm-mips/pgtable.h
+++ b/include/asm-mips/pgtable.h
@@ -353,8 +353,9 @@
 #if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1)
 static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 {
-	pte.pte_low &= _PAGE_CHG_MASK;
-	pte.pte_low |= pgprot_val(newprot);
+	pte.pte_low  &= _PAGE_CHG_MASK;
+	pte.pte_high &= ~0x3f;
+	pte.pte_low  |= pgprot_val(newprot);
 	pte.pte_high |= pgprot_val(newprot) & 0x3f;
 	return pte;
 }
diff --git a/include/asm-mips/smp.h b/include/asm-mips/smp.h
index 75c6fe7c..e14e4b6 100644
--- a/include/asm-mips/smp.h
+++ b/include/asm-mips/smp.h
@@ -48,7 +48,6 @@
 #define SMP_CALL_FUNCTION	0x2
 
 extern cpumask_t phys_cpu_present_map;
-extern cpumask_t cpu_online_map;
 #define cpu_possible_map	phys_cpu_present_map
 
 extern cpumask_t cpu_callout_map;
@@ -86,9 +85,9 @@
 extern void plat_smp_setup(void);
 
 /*
- * Called after init_IRQ but before __cpu_up.
+ * Called in smp_prepare_cpus.
  */
-extern void prom_prepare_cpus(unsigned int max_cpus);
+extern void plat_prepare_cpus(unsigned int max_cpus);
 
 /*
  * Last chance for the board code to finish SMP initialization before
diff --git a/include/asm-mips/sparsemem.h b/include/asm-mips/sparsemem.h
new file mode 100644
index 0000000..795ac6c
--- /dev/null
+++ b/include/asm-mips/sparsemem.h
@@ -0,0 +1,14 @@
+#ifndef _MIPS_SPARSEMEM_H
+#define _MIPS_SPARSEMEM_H
+#ifdef CONFIG_SPARSEMEM
+
+/*
+ * SECTION_SIZE_BITS		2^N: how big each section will be
+ * MAX_PHYSMEM_BITS		2^N: how much memory we can have in that space
+ */
+#define SECTION_SIZE_BITS       28
+#define MAX_PHYSMEM_BITS        35
+
+#endif /* CONFIG_SPARSEMEM */
+#endif /* _MIPS_SPARSEMEM_H */
+