blob: 41ea09cb9ac760a2e437bace58b372041850a10f [file] [log] [blame]
/*
* arch/ppc64/kernel/u3_iommu.c
*
* Copyright (C) 2004 Olof Johansson <olof@austin.ibm.com>, IBM Corporation
*
* Based on pSeries_iommu.c:
* Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation
* Copyright (C) 2004 Olof Johansson <olof@austin.ibm.com>, IBM Corporation
*
* Dynamic DMA mapping support, Apple U3 & IBM CPC925 "DART" iommu.
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/config.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/spinlock.h>
#include <linux/string.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/vmalloc.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/ppcdebug.h>
#include <asm/iommu.h>
#include <asm/pci-bridge.h>
#include <asm/machdep.h>
#include <asm/abs_addr.h>
#include <asm/cacheflush.h>
#include <asm/lmb.h>
#include "pci.h"
extern int iommu_force_on;
/* physical base of DART registers */
#define DART_BASE 0xf8033000UL
/* Offset from base to control register */
#define DARTCNTL 0
/* Offset from base to exception register */
#define DARTEXCP 0x10
/* Offset from base to TLB tag registers */
#define DARTTAG 0x1000
/* Control Register fields */
/* base address of table (pfn) */
#define DARTCNTL_BASE_MASK 0xfffff
#define DARTCNTL_BASE_SHIFT 12
#define DARTCNTL_FLUSHTLB 0x400
#define DARTCNTL_ENABLE 0x200
/* size of table in pages */
#define DARTCNTL_SIZE_MASK 0x1ff
#define DARTCNTL_SIZE_SHIFT 0
/* DART table fields */
#define DARTMAP_VALID 0x80000000
#define DARTMAP_RPNMASK 0x00ffffff
/* Physical base address and size of the DART table */
unsigned long dart_tablebase; /* exported to htab_initialize */
static unsigned long dart_tablesize;
/* Virtual base address of the DART table */
static u32 *dart_vbase;
/* Mapped base address for the dart */
static unsigned int *dart;
/* Dummy val that entries are set to when unused */
static unsigned int dart_emptyval;
static struct iommu_table iommu_table_u3;
static int iommu_table_u3_inited;
static int dart_dirty;
#define DBG(...)
static inline void dart_tlb_invalidate_all(void)
{
unsigned long l = 0;
unsigned int reg;
unsigned long limit;
DBG("dart: flush\n");
/* To invalidate the DART, set the DARTCNTL_FLUSHTLB bit in the
* control register and wait for it to clear.
*
* Gotcha: Sometimes, the DART won't detect that the bit gets
* set. If so, clear it and set it again.
*/
limit = 0;
retry:
reg = in_be32((unsigned int *)dart+DARTCNTL);
reg |= DARTCNTL_FLUSHTLB;
out_be32((unsigned int *)dart+DARTCNTL, reg);
l = 0;
while ((in_be32((unsigned int *)dart+DARTCNTL) & DARTCNTL_FLUSHTLB) &&
l < (1L<<limit)) {
l++;
}
if (l == (1L<<limit)) {
if (limit < 4) {
limit++;
reg = in_be32((unsigned int *)dart+DARTCNTL);
reg &= ~DARTCNTL_FLUSHTLB;
out_be32((unsigned int *)dart+DARTCNTL, reg);
goto retry;
} else
panic("U3-DART: TLB did not flush after waiting a long "
"time. Buggy U3 ?");
}
}
static void dart_flush(struct iommu_table *tbl)
{
if (dart_dirty)
dart_tlb_invalidate_all();
dart_dirty = 0;
}
static void dart_build(struct iommu_table *tbl, long index,
long npages, unsigned long uaddr,
enum dma_data_direction direction)
{
unsigned int *dp;
unsigned int rpn;
DBG("dart: build at: %lx, %lx, addr: %x\n", index, npages, uaddr);
dp = ((unsigned int*)tbl->it_base) + index;
/* On U3, all memory is contigous, so we can move this
* out of the loop.
*/
while (npages--) {
rpn = virt_to_abs(uaddr) >> PAGE_SHIFT;
*(dp++) = DARTMAP_VALID | (rpn & DARTMAP_RPNMASK);
rpn++;
uaddr += PAGE_SIZE;
}
dart_dirty = 1;
}
static void dart_free(struct iommu_table *tbl, long index, long npages)
{
unsigned int *dp;
/* We don't worry about flushing the TLB cache. The only drawback of
* not doing it is that we won't catch buggy device drivers doing
* bad DMAs, but then no 32-bit architecture ever does either.
*/
DBG("dart: free at: %lx, %lx\n", index, npages);
dp = ((unsigned int *)tbl->it_base) + index;
while (npages--)
*(dp++) = dart_emptyval;
}
static int dart_init(struct device_node *dart_node)
{
unsigned int regword;
unsigned int i;
unsigned long tmp;
if (dart_tablebase == 0 || dart_tablesize == 0) {
printk(KERN_INFO "U3-DART: table not allocated, using direct DMA\n");
return -ENODEV;
}
/* Make sure nothing from the DART range remains in the CPU cache
* from a previous mapping that existed before the kernel took
* over
*/
flush_dcache_phys_range(dart_tablebase, dart_tablebase + dart_tablesize);
/* Allocate a spare page to map all invalid DART pages. We need to do
* that to work around what looks like a problem with the HT bridge
* prefetching into invalid pages and corrupting data
*/
tmp = lmb_alloc(PAGE_SIZE, PAGE_SIZE);
if (!tmp)
panic("U3-DART: Cannot allocate spare page!");
dart_emptyval = DARTMAP_VALID | ((tmp >> PAGE_SHIFT) & DARTMAP_RPNMASK);
/* Map in DART registers. FIXME: Use device node to get base address */
dart = ioremap(DART_BASE, 0x7000);
if (dart == NULL)
panic("U3-DART: Cannot map registers!");
/* Set initial control register contents: table base,
* table size and enable bit
*/
regword = DARTCNTL_ENABLE |
((dart_tablebase >> PAGE_SHIFT) << DARTCNTL_BASE_SHIFT) |
(((dart_tablesize >> PAGE_SHIFT) & DARTCNTL_SIZE_MASK)
<< DARTCNTL_SIZE_SHIFT);
dart_vbase = ioremap(virt_to_abs(dart_tablebase), dart_tablesize);
/* Fill initial table */
for (i = 0; i < dart_tablesize/4; i++)
dart_vbase[i] = dart_emptyval;
/* Initialize DART with table base and enable it. */
out_be32((unsigned int *)dart, regword);
/* Invalidate DART to get rid of possible stale TLBs */
dart_tlb_invalidate_all();
printk(KERN_INFO "U3/CPC925 DART IOMMU initialized\n");
return 0;
}
static void iommu_table_u3_setup(void)
{
iommu_table_u3.it_busno = 0;
iommu_table_u3.it_offset = 0;
/* it_size is in number of entries */
iommu_table_u3.it_size = dart_tablesize / sizeof(u32);
/* Initialize the common IOMMU code */
iommu_table_u3.it_base = (unsigned long)dart_vbase;
iommu_table_u3.it_index = 0;
iommu_table_u3.it_blocksize = 1;
iommu_init_table(&iommu_table_u3);
/* Reserve the last page of the DART to avoid possible prefetch
* past the DART mapped area
*/
set_bit(iommu_table_u3.it_size - 1, iommu_table_u3.it_map);
}
static void iommu_dev_setup_u3(struct pci_dev *dev)
{
struct device_node *dn;
/* We only have one iommu table on the mac for now, which makes
* things simple. Setup all PCI devices to point to this table
*
* We must use pci_device_to_OF_node() to make sure that
* we get the real "final" pointer to the device in the
* pci_dev sysdata and not the temporary PHB one
*/
dn = pci_device_to_OF_node(dev);
if (dn)
PCI_DN(dn)->iommu_table = &iommu_table_u3;
}
static void iommu_bus_setup_u3(struct pci_bus *bus)
{
struct device_node *dn;
if (!iommu_table_u3_inited) {
iommu_table_u3_inited = 1;
iommu_table_u3_setup();
}
dn = pci_bus_to_OF_node(bus);
if (dn)
PCI_DN(dn)->iommu_table = &iommu_table_u3;
}
static void iommu_dev_setup_null(struct pci_dev *dev) { }
static void iommu_bus_setup_null(struct pci_bus *bus) { }
void iommu_init_early_u3(void)
{
struct device_node *dn;
/* Find the DART in the device-tree */
dn = of_find_compatible_node(NULL, "dart", "u3-dart");
if (dn == NULL)
return;
/* Setup low level TCE operations for the core IOMMU code */
ppc_md.tce_build = dart_build;
ppc_md.tce_free = dart_free;
ppc_md.tce_flush = dart_flush;
/* Initialize the DART HW */
if (dart_init(dn)) {
/* If init failed, use direct iommu and null setup functions */
ppc_md.iommu_dev_setup = iommu_dev_setup_null;
ppc_md.iommu_bus_setup = iommu_bus_setup_null;
/* Setup pci_dma ops */
pci_direct_iommu_init();
} else {
ppc_md.iommu_dev_setup = iommu_dev_setup_u3;
ppc_md.iommu_bus_setup = iommu_bus_setup_u3;
/* Setup pci_dma ops */
pci_iommu_init();
}
}
void __init alloc_u3_dart_table(void)
{
/* Only reserve DART space if machine has more than 2GB of RAM
* or if requested with iommu=on on cmdline.
*/
if (lmb_end_of_DRAM() <= 0x80000000ull && !iommu_force_on)
return;
/* 512 pages (2MB) is max DART tablesize. */
dart_tablesize = 1UL << 21;
/* 16MB (1 << 24) alignment. We allocate a full 16Mb chuck since we
* will blow up an entire large page anyway in the kernel mapping
*/
dart_tablebase = (unsigned long)
abs_to_virt(lmb_alloc_base(1UL<<24, 1UL<<24, 0x80000000L));
printk(KERN_INFO "U3-DART allocated at: %lx\n", dart_tablebase);
}