| /* |
| * IrNET protocol module : Synchronous PPP over an IrDA socket. |
| * |
| * Jean II - HPL `00 - <jt@hpl.hp.com> |
| * |
| * This file contains definitions and declarations global to the IrNET module, |
| * all grouped in one place... |
| * This file is a *private* header, so other modules don't want to know |
| * what's in there... |
| * |
| * Note : as most part of the Linux kernel, this module is available |
| * under the GNU General Public License (GPL). |
| */ |
| |
| #ifndef IRNET_H |
| #define IRNET_H |
| |
| /************************** DOCUMENTATION ***************************/ |
| /* |
| * What is IrNET |
| * ------------- |
| * IrNET is a protocol allowing to carry TCP/IP traffic between two |
| * IrDA peers in an efficient fashion. It is a thin layer, passing PPP |
| * packets to IrTTP and vice versa. It uses PPP in synchronous mode, |
| * because IrTTP offer a reliable sequenced packet service (as opposed |
| * to a byte stream). In fact, you could see IrNET as carrying TCP/IP |
| * in a IrDA socket, using PPP to provide the glue. |
| * |
| * The main difference with traditional PPP over IrCOMM is that we |
| * avoid the framing and serial emulation which are a performance |
| * bottleneck. It also allows multipoint communications in a sensible |
| * fashion. |
| * |
| * The main difference with IrLAN is that we use PPP for the link |
| * management, which is more standard, interoperable and flexible than |
| * the IrLAN protocol. For example, PPP adds authentication, |
| * encryption, compression, header compression and automated routing |
| * setup. And, as IrNET let PPP do the hard work, the implementation |
| * is much simpler than IrLAN. |
| * |
| * The Linux implementation |
| * ------------------------ |
| * IrNET is written on top of the Linux-IrDA stack, and interface with |
| * the generic Linux PPP driver. Because IrNET depend on recent |
| * changes of the PPP driver interface, IrNET will work only with very |
| * recent kernel (2.3.99-pre6 and up). |
| * |
| * The present implementation offer the following features : |
| * o simple user interface using pppd |
| * o efficient implementation (interface directly to PPP and IrTTP) |
| * o addressing (you can specify the name of the IrNET recipient) |
| * o multipoint operation (limited by IrLAP specification) |
| * o information in /proc/net/irda/irnet |
| * o IrNET events on /dev/irnet (for user space daemon) |
| * o IrNET daemon (irnetd) to automatically handle incoming requests |
| * o Windows 2000 compatibility (tested, but need more work) |
| * Currently missing : |
| * o Lot's of testing (that's your job) |
| * o Connection retries (may be too hard to do) |
| * o Check pppd persist mode |
| * o User space daemon (to automatically handle incoming requests) |
| * |
| * The setup is not currently the most easy, but this should get much |
| * better when everything will get integrated... |
| * |
| * Acknowledgements |
| * ---------------- |
| * This module is based on : |
| * o The PPP driver (ppp_synctty/ppp_generic) by Paul Mackerras |
| * o The IrLAN protocol (irlan_common/XXX) by Dag Brattli |
| * o The IrSock interface (af_irda) by Dag Brattli |
| * o Some other bits from the kernel and my drivers... |
| * Infinite thanks to those brave souls for providing the infrastructure |
| * upon which IrNET is built. |
| * |
| * Thanks to all my collegues in HP for helping me. In particular, |
| * thanks to Salil Pradhan and Bill Serra for W2k testing... |
| * Thanks to Luiz Magalhaes for irnetd and much testing... |
| * |
| * Thanks to Alan Cox for answering lot's of my stupid questions, and |
| * to Paul Mackerras answering my questions on how to best integrate |
| * IrNET and pppd. |
| * |
| * Jean II |
| * |
| * Note on some implementations choices... |
| * ------------------------------------ |
| * 1) Direct interface vs tty/socket |
| * I could have used a tty interface to hook to ppp and use the full |
| * socket API to connect to IrDA. The code would have been easier to |
| * maintain, and maybe the code would have been smaller... |
| * Instead, we hook directly to ppp_generic and to IrTTP, which make |
| * things more complicated... |
| * |
| * The first reason is flexibility : this allow us to create IrNET |
| * instances on demand (no /dev/ircommX crap) and to allow linkname |
| * specification on pppd command line... |
| * |
| * Second reason is speed optimisation. If you look closely at the |
| * transmit and receive paths, you will notice that they are "super lean" |
| * (that's why they look ugly), with no function calls and as little data |
| * copy and modification as I could... |
| * |
| * 2) irnetd in user space |
| * irnetd is implemented in user space, which is necessary to call pppd. |
| * This also give maximum benefits in term of flexibility and customability, |
| * and allow to offer the event channel, useful for other stuff like debug. |
| * |
| * On the other hand, this require a loose coordination between the |
| * present module and irnetd. One critical area is how incoming request |
| * are handled. |
| * When irnet receive an incoming request, it send an event to irnetd and |
| * drop the incoming IrNET socket. |
| * irnetd start a pppd instance, which create a new IrNET socket. This new |
| * socket is then connected in the originating node to the pppd instance. |
| * At this point, in the originating node, the first socket is closed. |
| * |
| * I admit, this is a bit messy and waste some resources. The alternative |
| * is caching incoming socket, and that's also quite messy and waste |
| * resources. |
| * We also make connection time slower. For example, on a 115 kb/s link it |
| * adds 60ms to the connection time (770 ms). However, this is slower than |
| * the time it takes to fire up pppd on my P133... |
| * |
| * |
| * History : |
| * ------- |
| * |
| * v1 - 15.5.00 - Jean II |
| * o Basic IrNET (hook to ppp_generic & IrTTP - incl. multipoint) |
| * o control channel on /dev/irnet (set name/address) |
| * o event channel on /dev/irnet (for user space daemon) |
| * |
| * v2 - 5.6.00 - Jean II |
| * o Enable DROP_NOT_READY to avoid PPP timeouts & other weirdness... |
| * o Add DISCONNECT_TO event and rename DISCONNECT_FROM. |
| * o Set official device number alloaction on /dev/irnet |
| * |
| * v3 - 30.8.00 - Jean II |
| * o Update to latest Linux-IrDA changes : |
| * - queue_t => irda_queue_t |
| * o Update to ppp-2.4.0 : |
| * - move irda_irnet_connect from PPPIOCATTACH to TIOCSETD |
| * o Add EXPIRE event (depend on new IrDA-Linux patch) |
| * o Switch from `hashbin_remove' to `hashbin_remove_this' to fix |
| * a multilink bug... (depend on new IrDA-Linux patch) |
| * o fix a self->daddr to self->raddr in irda_irnet_connect to fix |
| * another multilink bug (darn !) |
| * o Remove LINKNAME_IOCTL cruft |
| * |
| * v3b - 31.8.00 - Jean II |
| * o Dump discovery log at event channel startup |
| * |
| * v4 - 28.9.00 - Jean II |
| * o Fix interaction between poll/select and dump discovery log |
| * o Add IRNET_BLOCKED_LINK event (depend on new IrDA-Linux patch) |
| * o Add IRNET_NOANSWER_FROM event (mostly to help support) |
| * o Release flow control in disconnect_indication |
| * o Block packets while connecting (speed up connections) |
| * |
| * v5 - 11.01.01 - Jean II |
| * o Init self->max_header_size, just in case... |
| * o Set up ap->chan.hdrlen, to get zero copy on tx side working. |
| * o avoid tx->ttp->flow->ppp->tx->... loop, by checking flow state |
| * Thanks to Christian Gennerat for finding this bug ! |
| * --- |
| * o Declare the proper MTU/MRU that we can support |
| * (but PPP doesn't read the MTU value :-() |
| * o Declare hashbin HB_NOLOCK instead of HB_LOCAL to avoid |
| * disabling and enabling irq twice |
| * |
| * v6 - 31.05.01 - Jean II |
| * o Print source address in Found, Discovery, Expiry & Request events |
| * o Print requested source address in /proc/net/irnet |
| * o Change control channel input. Allow multiple commands in one line. |
| * o Add saddr command to change ap->rsaddr (and use that in IrDA) |
| * --- |
| * o Make the IrDA connection procedure totally asynchronous. |
| * Heavy rewrite of the IAS query code and the whole connection |
| * procedure. Now, irnet_connect() no longer need to be called from |
| * a process context... |
| * o Enable IrDA connect retries in ppp_irnet_send(). The good thing |
| * is that IrDA connect retries are directly driven by PPP LCP |
| * retries (we retry for each LCP packet), so that everything |
| * is transparently controlled from pppd lcp-max-configure. |
| * o Add ttp_connect flag to prevent rentry on the connect procedure |
| * o Test and fixups to eliminate side effects of retries |
| * |
| * v7 - 22.08.01 - Jean II |
| * o Cleanup : Change "saddr = 0x0" to "saddr = DEV_ADDR_ANY" |
| * o Fix bug in BLOCK_WHEN_CONNECT introduced in v6 : due to the |
| * asynchronous IAS query, self->tsap is NULL when PPP send the |
| * first packet. This was preventing "connect-delay 0" to work. |
| * Change the test in ppp_irnet_send() to self->ttp_connect. |
| * |
| * v8 - 1.11.01 - Jean II |
| * o Tighten the use of self->ttp_connect and self->ttp_open to |
| * prevent various race conditions. |
| * o Avoid leaking discovery log and skb |
| * o Replace "self" with "server" in irnet_connect_indication() to |
| * better detect cut'n'paste error ;-) |
| * |
| * v9 - 29.11.01 - Jean II |
| * o Fix event generation in disconnect indication that I broke in v8 |
| * It was always generation "No-Answer" because I was testing ttp_open |
| * just after clearing it. *blush*. |
| * o Use newly created irttp_listen() to fix potential crash when LAP |
| * destroyed before irnet module removed. |
| * |
| * v10 - 4.3.2 - Jean II |
| * o When receiving a disconnect indication, don't reenable the |
| * PPP Tx queue, this will trigger a reconnect. Instead, close |
| * the channel, which will kill pppd... |
| * |
| * v11 - 20.3.02 - Jean II |
| * o Oops ! v10 fix disabled IrNET retries and passive behaviour. |
| * Better fix in irnet_disconnect_indication() : |
| * - if connected, kill pppd via hangup. |
| * - if not connected, reenable ppp Tx, which trigger IrNET retry. |
| * |
| * v12 - 10.4.02 - Jean II |
| * o Fix race condition in irnet_connect_indication(). |
| * If the socket was already trying to connect, drop old connection |
| * and use new one only if acting as primary. See comments. |
| * |
| * v13 - 30.5.02 - Jean II |
| * o Update module init code |
| * |
| * v14 - 20.2.03 - Jean II |
| * o Add discovery hint bits in the control channel. |
| * o Remove obsolete MOD_INC/DEC_USE_COUNT in favor of .owner |
| * |
| * v15 - 7.4.03 - Jean II |
| * o Replace spin_lock_irqsave() with spin_lock_bh() so that we can |
| * use ppp_unit_number(). It's probably also better overall... |
| * o Disable call to ppp_unregister_channel(), because we can't do it. |
| */ |
| |
| /***************************** INCLUDES *****************************/ |
| |
| #include <linux/module.h> |
| |
| #include <linux/kernel.h> |
| #include <linux/skbuff.h> |
| #include <linux/tty.h> |
| #include <linux/proc_fs.h> |
| #include <linux/devfs_fs_kernel.h> |
| #include <linux/netdevice.h> |
| #include <linux/miscdevice.h> |
| #include <linux/poll.h> |
| #include <linux/config.h> |
| #include <linux/ctype.h> /* isspace() */ |
| #include <asm/uaccess.h> |
| #include <linux/init.h> |
| |
| #include <linux/ppp_defs.h> |
| #include <linux/if_ppp.h> |
| #include <linux/ppp_channel.h> |
| |
| #include <net/irda/irda.h> |
| #include <net/irda/iriap.h> |
| #include <net/irda/irias_object.h> |
| #include <net/irda/irlmp.h> |
| #include <net/irda/irttp.h> |
| #include <net/irda/discovery.h> |
| |
| /***************************** OPTIONS *****************************/ |
| /* |
| * Define or undefine to compile or not some optional part of the |
| * IrNET driver... |
| * Note : the present defaults make sense, play with that at your |
| * own risk... |
| */ |
| /* IrDA side of the business... */ |
| #define DISCOVERY_NOMASK /* To enable W2k compatibility... */ |
| #define ADVERTISE_HINT /* Advertise IrLAN hint bit */ |
| #define ALLOW_SIMULT_CONNECT /* This seem to work, cross fingers... */ |
| #define DISCOVERY_EVENTS /* Query the discovery log to post events */ |
| #define INITIAL_DISCOVERY /* Dump current discovery log as events */ |
| #undef STREAM_COMPAT /* Not needed - potentially messy */ |
| #undef CONNECT_INDIC_KICK /* Might mess IrDA, not needed */ |
| #undef FAIL_SEND_DISCONNECT /* Might mess IrDA, not needed */ |
| #undef PASS_CONNECT_PACKETS /* Not needed ? Safe */ |
| #undef MISSING_PPP_API /* Stuff I wish I could do */ |
| |
| /* PPP side of the business */ |
| #define BLOCK_WHEN_CONNECT /* Block packets when connecting */ |
| #define CONNECT_IN_SEND /* Retry IrDA connection procedure */ |
| #undef FLUSH_TO_PPP /* Not sure about this one, let's play safe */ |
| #undef SECURE_DEVIRNET /* Bah... */ |
| |
| /****************************** DEBUG ******************************/ |
| |
| /* |
| * This set of flags enable and disable all the various warning, |
| * error and debug message of this driver. |
| * Each section can be enabled and disabled independently |
| */ |
| /* In the PPP part */ |
| #define DEBUG_CTRL_TRACE 0 /* Control channel */ |
| #define DEBUG_CTRL_INFO 0 /* various info */ |
| #define DEBUG_CTRL_ERROR 1 /* problems */ |
| #define DEBUG_FS_TRACE 0 /* filesystem callbacks */ |
| #define DEBUG_FS_INFO 0 /* various info */ |
| #define DEBUG_FS_ERROR 1 /* problems */ |
| #define DEBUG_PPP_TRACE 0 /* PPP related functions */ |
| #define DEBUG_PPP_INFO 0 /* various info */ |
| #define DEBUG_PPP_ERROR 1 /* problems */ |
| #define DEBUG_MODULE_TRACE 0 /* module insertion/removal */ |
| #define DEBUG_MODULE_ERROR 1 /* problems */ |
| |
| /* In the IrDA part */ |
| #define DEBUG_IRDA_SR_TRACE 0 /* IRDA subroutines */ |
| #define DEBUG_IRDA_SR_INFO 0 /* various info */ |
| #define DEBUG_IRDA_SR_ERROR 1 /* problems */ |
| #define DEBUG_IRDA_SOCK_TRACE 0 /* IRDA main socket functions */ |
| #define DEBUG_IRDA_SOCK_INFO 0 /* various info */ |
| #define DEBUG_IRDA_SOCK_ERROR 1 /* problems */ |
| #define DEBUG_IRDA_SERV_TRACE 0 /* The IrNET server */ |
| #define DEBUG_IRDA_SERV_INFO 0 /* various info */ |
| #define DEBUG_IRDA_SERV_ERROR 1 /* problems */ |
| #define DEBUG_IRDA_TCB_TRACE 0 /* IRDA IrTTP callbacks */ |
| #define DEBUG_IRDA_CB_INFO 0 /* various info */ |
| #define DEBUG_IRDA_CB_ERROR 1 /* problems */ |
| #define DEBUG_IRDA_OCB_TRACE 0 /* IRDA other callbacks */ |
| #define DEBUG_IRDA_OCB_INFO 0 /* various info */ |
| #define DEBUG_IRDA_OCB_ERROR 1 /* problems */ |
| |
| #define DEBUG_ASSERT 0 /* Verify all assertions */ |
| |
| /* |
| * These are the macros we are using to actually print the debug |
| * statements. Don't look at it, it's ugly... |
| * |
| * One of the trick is that, as the DEBUG_XXX are constant, the |
| * compiler will optimise away the if() in all cases. |
| */ |
| /* All error messages (will show up in the normal logs) */ |
| #define DERROR(dbg, format, args...) \ |
| {if(DEBUG_##dbg) \ |
| printk(KERN_INFO "irnet: %s(): " format, __FUNCTION__ , ##args);} |
| |
| /* Normal debug message (will show up in /var/log/debug) */ |
| #define DEBUG(dbg, format, args...) \ |
| {if(DEBUG_##dbg) \ |
| printk(KERN_DEBUG "irnet: %s(): " format, __FUNCTION__ , ##args);} |
| |
| /* Entering a function (trace) */ |
| #define DENTER(dbg, format, args...) \ |
| {if(DEBUG_##dbg) \ |
| printk(KERN_DEBUG "irnet: -> %s" format, __FUNCTION__ , ##args);} |
| |
| /* Entering and exiting a function in one go (trace) */ |
| #define DPASS(dbg, format, args...) \ |
| {if(DEBUG_##dbg) \ |
| printk(KERN_DEBUG "irnet: <>%s" format, __FUNCTION__ , ##args);} |
| |
| /* Exiting a function (trace) */ |
| #define DEXIT(dbg, format, args...) \ |
| {if(DEBUG_##dbg) \ |
| printk(KERN_DEBUG "irnet: <-%s()" format, __FUNCTION__ , ##args);} |
| |
| /* Exit a function with debug */ |
| #define DRETURN(ret, dbg, args...) \ |
| {DEXIT(dbg, ": " args);\ |
| return ret; } |
| |
| /* Exit a function on failed condition */ |
| #define DABORT(cond, ret, dbg, args...) \ |
| {if(cond) {\ |
| DERROR(dbg, args);\ |
| return ret; }} |
| |
| /* Invalid assertion, print out an error and exit... */ |
| #define DASSERT(cond, ret, dbg, args...) \ |
| {if((DEBUG_ASSERT) && !(cond)) {\ |
| DERROR(dbg, "Invalid assertion: " args);\ |
| return ret; }} |
| |
| /************************ CONSTANTS & MACROS ************************/ |
| |
| /* Paranoia */ |
| #define IRNET_MAGIC 0xB00754 |
| |
| /* Number of control events in the control channel buffer... */ |
| #define IRNET_MAX_EVENTS 8 /* Should be more than enough... */ |
| |
| /****************************** TYPES ******************************/ |
| |
| /* |
| * This is the main structure where we store all the data pertaining to |
| * one instance of irnet. |
| * Note : in irnet functions, a pointer this structure is usually called |
| * "ap" or "self". If the code is borrowed from the IrDA stack, it tend |
| * to be called "self", and if it is borrowed from the PPP driver it is |
| * "ap". Apart from that, it's exactly the same structure ;-) |
| */ |
| typedef struct irnet_socket |
| { |
| /* ------------------- Instance management ------------------- */ |
| /* We manage a linked list of IrNET socket instances */ |
| irda_queue_t q; /* Must be first - for hasbin */ |
| int magic; /* Paranoia */ |
| |
| /* --------------------- FileSystem part --------------------- */ |
| /* "pppd" interact directly with us on a /dev/ file */ |
| struct file * file; /* File descriptor of this instance */ |
| /* TTY stuff - to keep "pppd" happy */ |
| struct termios termios; /* Various tty flags */ |
| /* Stuff for the control channel */ |
| int event_index; /* Last read in the event log */ |
| |
| /* ------------------------- PPP part ------------------------- */ |
| /* We interface directly to the ppp_generic driver in the kernel */ |
| int ppp_open; /* registered with ppp_generic */ |
| struct ppp_channel chan; /* Interface to generic ppp layer */ |
| |
| int mru; /* Max size of PPP payload */ |
| u32 xaccm[8]; /* Asynchronous character map (just */ |
| u32 raccm; /* to please pppd - dummy) */ |
| unsigned int flags; /* PPP flags (compression, ...) */ |
| unsigned int rbits; /* Unused receive flags ??? */ |
| |
| /* ------------------------ IrTTP part ------------------------ */ |
| /* We create a pseudo "socket" over the IrDA tranport */ |
| unsigned long ttp_open; /* Set when IrTTP is ready */ |
| unsigned long ttp_connect; /* Set when IrTTP is connecting */ |
| struct tsap_cb * tsap; /* IrTTP instance (the connection) */ |
| |
| char rname[NICKNAME_MAX_LEN + 1]; |
| /* IrDA nickname of destination */ |
| __u32 rdaddr; /* Requested peer IrDA address */ |
| __u32 rsaddr; /* Requested local IrDA address */ |
| __u32 daddr; /* actual peer IrDA address */ |
| __u32 saddr; /* my local IrDA address */ |
| __u8 dtsap_sel; /* Remote TSAP selector */ |
| __u8 stsap_sel; /* Local TSAP selector */ |
| |
| __u32 max_sdu_size_rx;/* Socket parameters used for IrTTP */ |
| __u32 max_sdu_size_tx; |
| __u32 max_data_size; |
| __u8 max_header_size; |
| LOCAL_FLOW tx_flow; /* State of the Tx path in IrTTP */ |
| |
| /* ------------------- IrLMP and IrIAS part ------------------- */ |
| /* Used for IrDA Discovery and socket name resolution */ |
| void * ckey; /* IrLMP client handle */ |
| __u16 mask; /* Hint bits mask (filter discov.)*/ |
| int nslots; /* Number of slots for discovery */ |
| |
| struct iriap_cb * iriap; /* Used to query remote IAS */ |
| int errno; /* status of the IAS query */ |
| |
| /* -------------------- Discovery log part -------------------- */ |
| /* Used by initial discovery on the control channel |
| * and by irnet_discover_daddr_and_lsap_sel() */ |
| struct irda_device_info *discoveries; /* Copy of the discovery log */ |
| int disco_index; /* Last read in the discovery log */ |
| int disco_number; /* Size of the discovery log */ |
| |
| } irnet_socket; |
| |
| /* |
| * This is the various event that we will generate on the control channel |
| */ |
| typedef enum irnet_event |
| { |
| IRNET_DISCOVER, /* New IrNET node discovered */ |
| IRNET_EXPIRE, /* IrNET node expired */ |
| IRNET_CONNECT_TO, /* IrNET socket has connected to other node */ |
| IRNET_CONNECT_FROM, /* Other node has connected to IrNET socket */ |
| IRNET_REQUEST_FROM, /* Non satisfied connection request */ |
| IRNET_NOANSWER_FROM, /* Failed connection request */ |
| IRNET_BLOCKED_LINK, /* Link (IrLAP) is blocked for > 3s */ |
| IRNET_DISCONNECT_FROM, /* IrNET socket has disconnected */ |
| IRNET_DISCONNECT_TO /* Closing IrNET socket */ |
| } irnet_event; |
| |
| /* |
| * This is the storage for an event and its arguments |
| */ |
| typedef struct irnet_log |
| { |
| irnet_event event; |
| int unit; |
| __u32 saddr; |
| __u32 daddr; |
| char name[NICKNAME_MAX_LEN + 1]; /* 21 + 1 */ |
| __u16_host_order hints; /* Discovery hint bits */ |
| } irnet_log; |
| |
| /* |
| * This is the storage for all events and related stuff... |
| */ |
| typedef struct irnet_ctrl_channel |
| { |
| irnet_log log[IRNET_MAX_EVENTS]; /* Event log */ |
| int index; /* Current index in log */ |
| spinlock_t spinlock; /* Serialize access to the event log */ |
| wait_queue_head_t rwait; /* processes blocked on read (or poll) */ |
| } irnet_ctrl_channel; |
| |
| /**************************** PROTOTYPES ****************************/ |
| /* |
| * Global functions of the IrNET module |
| * Note : we list here also functions called from one file to the other. |
| */ |
| |
| /* -------------------------- IRDA PART -------------------------- */ |
| extern int |
| irda_irnet_create(irnet_socket *); /* Initialise a IrNET socket */ |
| extern int |
| irda_irnet_connect(irnet_socket *); /* Try to connect over IrDA */ |
| extern void |
| irda_irnet_destroy(irnet_socket *); /* Teardown a IrNET socket */ |
| extern int |
| irda_irnet_init(void); /* Initialise IrDA part of IrNET */ |
| extern void |
| irda_irnet_cleanup(void); /* Teardown IrDA part of IrNET */ |
| /* ---------------------------- MODULE ---------------------------- */ |
| extern int |
| irnet_init(void); /* Initialise IrNET module */ |
| |
| /**************************** VARIABLES ****************************/ |
| |
| /* Control channel stuff - allocated in irnet_irda.h */ |
| extern struct irnet_ctrl_channel irnet_events; |
| |
| #endif /* IRNET_H */ |
