/*
 *  Copyright (c) by Jaroslav Kysela <perex@suse.cz>
 *  Routines for control of MPU-401 in UART mode
 *
 *   Modified for the Aureal Vortex based Soundcards
 *   by Manuel Jander (mjande@embedded.cl).
 *
 *   This program is free software; you can redistribute it and/or modify
 *   it under the terms of the GNU General Public License as published by
 *   the Free Software Foundation; either version 2 of the License, or
 *   (at your option) any later version.
 *
 *   This program is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *   GNU General Public License for more details.
 *
 *   You should have received a copy of the GNU General Public License
 *   along with this program; if not, write to the Free Software
 *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
 *
 */

#include <sound/driver.h>
#include <linux/time.h>
#include <linux/init.h>
#include <sound/core.h>
#include <sound/mpu401.h>
#include "au88x0.h"

/* Check for mpu401 mmio support. */
/* MPU401 legacy support is only provided as a emergency fallback *
 * for older versions of ALSA. Its usage is strongly discouraged. */
#ifndef MPU401_HW_AUREAL
#define VORTEX_MPU401_LEGACY
#endif

/* Vortex MPU401 defines. */
#define MIDI_CLOCK_DIV      0x61
/* Standart MPU401 defines. */
#define MPU401_RESET		0xff
#define MPU401_ENTER_UART	0x3f
#define MPU401_ACK		    0xfe

static int __devinit snd_vortex_midi(vortex_t * vortex)
{
	snd_rawmidi_t *rmidi;
	int temp, mode;
	mpu401_t *mpu;
	int port;

#ifdef VORTEX_MPU401_LEGACY
	/* EnableHardCodedMPU401Port() */
	/* Enable Legacy MIDI Interface port. */
	port = (0x03 << 5);	/* FIXME: static address. 0x330 */
	temp =
	    (hwread(vortex->mmio, VORTEX_CTRL) & ~CTRL_MIDI_PORT) |
	    CTRL_MIDI_EN | port;
	hwwrite(vortex->mmio, VORTEX_CTRL, temp);
#else
	/* Disable Legacy MIDI Interface port. */
	temp =
	    (hwread(vortex->mmio, VORTEX_CTRL) & ~CTRL_MIDI_PORT) &
	    ~CTRL_MIDI_EN;
	hwwrite(vortex->mmio, VORTEX_CTRL, temp);
#endif
	/* Mpu401UartInit() */
	mode = 1;
	temp = hwread(vortex->mmio, VORTEX_CTRL2) & 0xffff00cf;
	temp |= (MIDI_CLOCK_DIV << 8) | ((mode >> 24) & 0xff) << 4;
	hwwrite(vortex->mmio, VORTEX_CTRL2, temp);
	hwwrite(vortex->mmio, VORTEX_MIDI_CMD, MPU401_RESET);
	/* Set some kind of mode */
	if (mode)
		hwwrite(vortex->mmio, VORTEX_MIDI_CMD, MPU401_ENTER_UART);

	/* Check if anything is OK. */
	temp = hwread(vortex->mmio, VORTEX_MIDI_DATA);
	if (temp != MPU401_ACK /*0xfe */ ) {
		printk(KERN_ERR "midi port doesn't acknowledge!\n");
		return -ENODEV;
	}
	/* Enable MPU401 interrupts. */
	hwwrite(vortex->mmio, VORTEX_IRQ_CTRL,
		hwread(vortex->mmio, VORTEX_IRQ_CTRL) | IRQ_MIDI);

	/* Create MPU401 instance. */
#ifdef VORTEX_MPU401_LEGACY
	if ((temp =
	     snd_mpu401_uart_new(vortex->card, 0, MPU401_HW_MPU401, 0x330,
				 0, 0, 0, &rmidi)) != 0) {
		hwwrite(vortex->mmio, VORTEX_CTRL,
			(hwread(vortex->mmio, VORTEX_CTRL) &
			 ~CTRL_MIDI_PORT) & ~CTRL_MIDI_EN);
		return temp;
	}
#else
	port = (unsigned long)(vortex->mmio + (VORTEX_MIDI_DATA >> 2));
	if ((temp =
	     snd_mpu401_uart_new(vortex->card, 0, MPU401_HW_AUREAL, port,
				 1, 0, 0, &rmidi)) != 0) {
		hwwrite(vortex->mmio, VORTEX_CTRL,
			(hwread(vortex->mmio, VORTEX_CTRL) &
			 ~CTRL_MIDI_PORT) & ~CTRL_MIDI_EN);
		return temp;
	}
	mpu = rmidi->private_data;
	mpu->cport = (unsigned long)(vortex->mmio + (VORTEX_MIDI_CMD >> 2));
#endif
	vortex->rmidi = rmidi;
	return 0;
}