| /* |
| * OMAP Dual-Mode Timers |
| * |
| * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ |
| * Tarun Kanti DebBarma <tarun.kanti@ti.com> |
| * Thara Gopinath <thara@ti.com> |
| * |
| * Platform device conversion and hwmod support. |
| * |
| * Copyright (C) 2005 Nokia Corporation |
| * Author: Lauri Leukkunen <lauri.leukkunen@nokia.com> |
| * PWM and clock framwork support by Timo Teras. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN |
| * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
| * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/io.h> |
| #include <linux/platform_device.h> |
| |
| #ifndef __CLOCKSOURCE_DMTIMER_H |
| #define __CLOCKSOURCE_DMTIMER_H |
| |
| /* clock sources */ |
| #define OMAP_TIMER_SRC_SYS_CLK 0x00 |
| #define OMAP_TIMER_SRC_32_KHZ 0x01 |
| #define OMAP_TIMER_SRC_EXT_CLK 0x02 |
| |
| /* timer interrupt enable bits */ |
| #define OMAP_TIMER_INT_CAPTURE (1 << 2) |
| #define OMAP_TIMER_INT_OVERFLOW (1 << 1) |
| #define OMAP_TIMER_INT_MATCH (1 << 0) |
| |
| /* trigger types */ |
| #define OMAP_TIMER_TRIGGER_NONE 0x00 |
| #define OMAP_TIMER_TRIGGER_OVERFLOW 0x01 |
| #define OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE 0x02 |
| |
| /* posted mode types */ |
| #define OMAP_TIMER_NONPOSTED 0x00 |
| #define OMAP_TIMER_POSTED 0x01 |
| |
| /* timer capabilities used in hwmod database */ |
| #define OMAP_TIMER_SECURE 0x80000000 |
| #define OMAP_TIMER_ALWON 0x40000000 |
| #define OMAP_TIMER_HAS_PWM 0x20000000 |
| #define OMAP_TIMER_NEEDS_RESET 0x10000000 |
| #define OMAP_TIMER_HAS_DSP_IRQ 0x08000000 |
| |
| /* |
| * timer errata flags |
| * |
| * Errata i103/i767 impacts all OMAP3/4/5 devices including AM33xx. This |
| * errata prevents us from using posted mode on these devices, unless the |
| * timer counter register is never read. For more details please refer to |
| * the OMAP3/4/5 errata documents. |
| */ |
| #define OMAP_TIMER_ERRATA_I103_I767 0x80000000 |
| |
| struct timer_regs { |
| u32 tidr; |
| u32 tier; |
| u32 twer; |
| u32 tclr; |
| u32 tcrr; |
| u32 tldr; |
| u32 ttrg; |
| u32 twps; |
| u32 tmar; |
| u32 tcar1; |
| u32 tsicr; |
| u32 tcar2; |
| u32 tpir; |
| u32 tnir; |
| u32 tcvr; |
| u32 tocr; |
| u32 towr; |
| }; |
| |
| struct omap_dm_timer { |
| int id; |
| int irq; |
| struct clk *fclk; |
| |
| void __iomem *io_base; |
| void __iomem *irq_stat; /* TISR/IRQSTATUS interrupt status */ |
| void __iomem *irq_ena; /* irq enable */ |
| void __iomem *irq_dis; /* irq disable, only on v2 ip */ |
| void __iomem *pend; /* write pending */ |
| void __iomem *func_base; /* function register base */ |
| |
| atomic_t enabled; |
| unsigned long rate; |
| unsigned reserved:1; |
| unsigned posted:1; |
| struct timer_regs context; |
| int revision; |
| u32 capability; |
| u32 errata; |
| struct platform_device *pdev; |
| struct list_head node; |
| struct notifier_block nb; |
| }; |
| |
| int omap_dm_timer_reserve_systimer(int id); |
| struct omap_dm_timer *omap_dm_timer_request_by_cap(u32 cap); |
| |
| int omap_dm_timer_get_irq(struct omap_dm_timer *timer); |
| |
| u32 omap_dm_timer_modify_idlect_mask(u32 inputmask); |
| |
| int omap_dm_timer_trigger(struct omap_dm_timer *timer); |
| |
| int omap_dm_timers_active(void); |
| |
| /* |
| * Do not use the defines below, they are not needed. They should be only |
| * used by dmtimer.c and sys_timer related code. |
| */ |
| |
| /* |
| * The interrupt registers are different between v1 and v2 ip. |
| * These registers are offsets from timer->iobase. |
| */ |
| #define OMAP_TIMER_ID_OFFSET 0x00 |
| #define OMAP_TIMER_OCP_CFG_OFFSET 0x10 |
| |
| #define OMAP_TIMER_V1_SYS_STAT_OFFSET 0x14 |
| #define OMAP_TIMER_V1_STAT_OFFSET 0x18 |
| #define OMAP_TIMER_V1_INT_EN_OFFSET 0x1c |
| |
| #define OMAP_TIMER_V2_IRQSTATUS_RAW 0x24 |
| #define OMAP_TIMER_V2_IRQSTATUS 0x28 |
| #define OMAP_TIMER_V2_IRQENABLE_SET 0x2c |
| #define OMAP_TIMER_V2_IRQENABLE_CLR 0x30 |
| |
| /* |
| * The functional registers have a different base on v1 and v2 ip. |
| * These registers are offsets from timer->func_base. The func_base |
| * is samae as io_base for v1 and io_base + 0x14 for v2 ip. |
| * |
| */ |
| #define OMAP_TIMER_V2_FUNC_OFFSET 0x14 |
| |
| #define _OMAP_TIMER_WAKEUP_EN_OFFSET 0x20 |
| #define _OMAP_TIMER_CTRL_OFFSET 0x24 |
| #define OMAP_TIMER_CTRL_GPOCFG (1 << 14) |
| #define OMAP_TIMER_CTRL_CAPTMODE (1 << 13) |
| #define OMAP_TIMER_CTRL_PT (1 << 12) |
| #define OMAP_TIMER_CTRL_TCM_LOWTOHIGH (0x1 << 8) |
| #define OMAP_TIMER_CTRL_TCM_HIGHTOLOW (0x2 << 8) |
| #define OMAP_TIMER_CTRL_TCM_BOTHEDGES (0x3 << 8) |
| #define OMAP_TIMER_CTRL_SCPWM (1 << 7) |
| #define OMAP_TIMER_CTRL_CE (1 << 6) /* compare enable */ |
| #define OMAP_TIMER_CTRL_PRE (1 << 5) /* prescaler enable */ |
| #define OMAP_TIMER_CTRL_PTV_SHIFT 2 /* prescaler value shift */ |
| #define OMAP_TIMER_CTRL_POSTED (1 << 2) |
| #define OMAP_TIMER_CTRL_AR (1 << 1) /* auto-reload enable */ |
| #define OMAP_TIMER_CTRL_ST (1 << 0) /* start timer */ |
| #define _OMAP_TIMER_COUNTER_OFFSET 0x28 |
| #define _OMAP_TIMER_LOAD_OFFSET 0x2c |
| #define _OMAP_TIMER_TRIGGER_OFFSET 0x30 |
| #define _OMAP_TIMER_WRITE_PEND_OFFSET 0x34 |
| #define WP_NONE 0 /* no write pending bit */ |
| #define WP_TCLR (1 << 0) |
| #define WP_TCRR (1 << 1) |
| #define WP_TLDR (1 << 2) |
| #define WP_TTGR (1 << 3) |
| #define WP_TMAR (1 << 4) |
| #define WP_TPIR (1 << 5) |
| #define WP_TNIR (1 << 6) |
| #define WP_TCVR (1 << 7) |
| #define WP_TOCR (1 << 8) |
| #define WP_TOWR (1 << 9) |
| #define _OMAP_TIMER_MATCH_OFFSET 0x38 |
| #define _OMAP_TIMER_CAPTURE_OFFSET 0x3c |
| #define _OMAP_TIMER_IF_CTRL_OFFSET 0x40 |
| #define _OMAP_TIMER_CAPTURE2_OFFSET 0x44 /* TCAR2, 34xx only */ |
| #define _OMAP_TIMER_TICK_POS_OFFSET 0x48 /* TPIR, 34xx only */ |
| #define _OMAP_TIMER_TICK_NEG_OFFSET 0x4c /* TNIR, 34xx only */ |
| #define _OMAP_TIMER_TICK_COUNT_OFFSET 0x50 /* TCVR, 34xx only */ |
| #define _OMAP_TIMER_TICK_INT_MASK_SET_OFFSET 0x54 /* TOCR, 34xx only */ |
| #define _OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET 0x58 /* TOWR, 34xx only */ |
| |
| /* register offsets with the write pending bit encoded */ |
| #define WPSHIFT 16 |
| |
| #define OMAP_TIMER_WAKEUP_EN_REG (_OMAP_TIMER_WAKEUP_EN_OFFSET \ |
| | (WP_NONE << WPSHIFT)) |
| |
| #define OMAP_TIMER_CTRL_REG (_OMAP_TIMER_CTRL_OFFSET \ |
| | (WP_TCLR << WPSHIFT)) |
| |
| #define OMAP_TIMER_COUNTER_REG (_OMAP_TIMER_COUNTER_OFFSET \ |
| | (WP_TCRR << WPSHIFT)) |
| |
| #define OMAP_TIMER_LOAD_REG (_OMAP_TIMER_LOAD_OFFSET \ |
| | (WP_TLDR << WPSHIFT)) |
| |
| #define OMAP_TIMER_TRIGGER_REG (_OMAP_TIMER_TRIGGER_OFFSET \ |
| | (WP_TTGR << WPSHIFT)) |
| |
| #define OMAP_TIMER_WRITE_PEND_REG (_OMAP_TIMER_WRITE_PEND_OFFSET \ |
| | (WP_NONE << WPSHIFT)) |
| |
| #define OMAP_TIMER_MATCH_REG (_OMAP_TIMER_MATCH_OFFSET \ |
| | (WP_TMAR << WPSHIFT)) |
| |
| #define OMAP_TIMER_CAPTURE_REG (_OMAP_TIMER_CAPTURE_OFFSET \ |
| | (WP_NONE << WPSHIFT)) |
| |
| #define OMAP_TIMER_IF_CTRL_REG (_OMAP_TIMER_IF_CTRL_OFFSET \ |
| | (WP_NONE << WPSHIFT)) |
| |
| #define OMAP_TIMER_CAPTURE2_REG (_OMAP_TIMER_CAPTURE2_OFFSET \ |
| | (WP_NONE << WPSHIFT)) |
| |
| #define OMAP_TIMER_TICK_POS_REG (_OMAP_TIMER_TICK_POS_OFFSET \ |
| | (WP_TPIR << WPSHIFT)) |
| |
| #define OMAP_TIMER_TICK_NEG_REG (_OMAP_TIMER_TICK_NEG_OFFSET \ |
| | (WP_TNIR << WPSHIFT)) |
| |
| #define OMAP_TIMER_TICK_COUNT_REG (_OMAP_TIMER_TICK_COUNT_OFFSET \ |
| | (WP_TCVR << WPSHIFT)) |
| |
| #define OMAP_TIMER_TICK_INT_MASK_SET_REG \ |
| (_OMAP_TIMER_TICK_INT_MASK_SET_OFFSET | (WP_TOCR << WPSHIFT)) |
| |
| #define OMAP_TIMER_TICK_INT_MASK_COUNT_REG \ |
| (_OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET | (WP_TOWR << WPSHIFT)) |
| |
| /* |
| * The below are inlined to optimize code size for system timers. Other code |
| * should not need these at all. |
| */ |
| #if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP2PLUS) |
| static inline u32 __omap_dm_timer_read(struct omap_dm_timer *timer, u32 reg, |
| int posted) |
| { |
| if (posted) |
| while (readl_relaxed(timer->pend) & (reg >> WPSHIFT)) |
| cpu_relax(); |
| |
| return readl_relaxed(timer->func_base + (reg & 0xff)); |
| } |
| |
| static inline void __omap_dm_timer_write(struct omap_dm_timer *timer, |
| u32 reg, u32 val, int posted) |
| { |
| if (posted) |
| while (readl_relaxed(timer->pend) & (reg >> WPSHIFT)) |
| cpu_relax(); |
| |
| writel_relaxed(val, timer->func_base + (reg & 0xff)); |
| } |
| |
| static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer) |
| { |
| u32 tidr; |
| |
| /* Assume v1 ip if bits [31:16] are zero */ |
| tidr = readl_relaxed(timer->io_base); |
| if (!(tidr >> 16)) { |
| timer->revision = 1; |
| timer->irq_stat = timer->io_base + OMAP_TIMER_V1_STAT_OFFSET; |
| timer->irq_ena = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET; |
| timer->irq_dis = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET; |
| timer->pend = timer->io_base + _OMAP_TIMER_WRITE_PEND_OFFSET; |
| timer->func_base = timer->io_base; |
| } else { |
| timer->revision = 2; |
| timer->irq_stat = timer->io_base + OMAP_TIMER_V2_IRQSTATUS; |
| timer->irq_ena = timer->io_base + OMAP_TIMER_V2_IRQENABLE_SET; |
| timer->irq_dis = timer->io_base + OMAP_TIMER_V2_IRQENABLE_CLR; |
| timer->pend = timer->io_base + |
| _OMAP_TIMER_WRITE_PEND_OFFSET + |
| OMAP_TIMER_V2_FUNC_OFFSET; |
| timer->func_base = timer->io_base + OMAP_TIMER_V2_FUNC_OFFSET; |
| } |
| } |
| |
| /* |
| * __omap_dm_timer_enable_posted - enables write posted mode |
| * @timer: pointer to timer instance handle |
| * |
| * Enables the write posted mode for the timer. When posted mode is enabled |
| * writes to certain timer registers are immediately acknowledged by the |
| * internal bus and hence prevents stalling the CPU waiting for the write to |
| * complete. Enabling this feature can improve performance for writing to the |
| * timer registers. |
| */ |
| static inline void __omap_dm_timer_enable_posted(struct omap_dm_timer *timer) |
| { |
| if (timer->posted) |
| return; |
| |
| if (timer->errata & OMAP_TIMER_ERRATA_I103_I767) { |
| timer->posted = OMAP_TIMER_NONPOSTED; |
| __omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG, 0, 0); |
| return; |
| } |
| |
| __omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG, |
| OMAP_TIMER_CTRL_POSTED, 0); |
| timer->context.tsicr = OMAP_TIMER_CTRL_POSTED; |
| timer->posted = OMAP_TIMER_POSTED; |
| } |
| |
| /** |
| * __omap_dm_timer_override_errata - override errata flags for a timer |
| * @timer: pointer to timer handle |
| * @errata: errata flags to be ignored |
| * |
| * For a given timer, override a timer errata by clearing the flags |
| * specified by the errata argument. A specific erratum should only be |
| * overridden for a timer if the timer is used in such a way the erratum |
| * has no impact. |
| */ |
| static inline void __omap_dm_timer_override_errata(struct omap_dm_timer *timer, |
| u32 errata) |
| { |
| timer->errata &= ~errata; |
| } |
| |
| static inline void __omap_dm_timer_stop(struct omap_dm_timer *timer, |
| int posted, unsigned long rate) |
| { |
| u32 l; |
| |
| l = __omap_dm_timer_read(timer, OMAP_TIMER_CTRL_REG, posted); |
| if (l & OMAP_TIMER_CTRL_ST) { |
| l &= ~0x1; |
| __omap_dm_timer_write(timer, OMAP_TIMER_CTRL_REG, l, posted); |
| #ifdef CONFIG_ARCH_OMAP2PLUS |
| /* Readback to make sure write has completed */ |
| __omap_dm_timer_read(timer, OMAP_TIMER_CTRL_REG, posted); |
| /* |
| * Wait for functional clock period x 3.5 to make sure that |
| * timer is stopped |
| */ |
| udelay(3500000 / rate + 1); |
| #endif |
| } |
| |
| /* Ack possibly pending interrupt */ |
| writel_relaxed(OMAP_TIMER_INT_OVERFLOW, timer->irq_stat); |
| } |
| |
| static inline void __omap_dm_timer_load_start(struct omap_dm_timer *timer, |
| u32 ctrl, unsigned int load, |
| int posted) |
| { |
| __omap_dm_timer_write(timer, OMAP_TIMER_COUNTER_REG, load, posted); |
| __omap_dm_timer_write(timer, OMAP_TIMER_CTRL_REG, ctrl, posted); |
| } |
| |
| static inline void __omap_dm_timer_int_enable(struct omap_dm_timer *timer, |
| unsigned int value) |
| { |
| writel_relaxed(value, timer->irq_ena); |
| __omap_dm_timer_write(timer, OMAP_TIMER_WAKEUP_EN_REG, value, 0); |
| } |
| |
| static inline unsigned int |
| __omap_dm_timer_read_counter(struct omap_dm_timer *timer, int posted) |
| { |
| return __omap_dm_timer_read(timer, OMAP_TIMER_COUNTER_REG, posted); |
| } |
| |
| static inline void __omap_dm_timer_write_status(struct omap_dm_timer *timer, |
| unsigned int value) |
| { |
| writel_relaxed(value, timer->irq_stat); |
| } |
| #endif /* CONFIG_ARCH_OMAP1 || CONFIG_ARCH_OMAP2PLUS */ |
| #endif /* __CLOCKSOURCE_DMTIMER_H */ |