| /* $Id: sunbpp.h,v 1.1 1999/08/13 06:21:44 shadow Exp $ |
| * include/asm-sparc64/sunbpp.h |
| */ |
| |
| #ifndef _ASM_SPARC64_SUNBPP_H |
| #define _ASM_SPARC64_SUNBPP_H |
| |
| struct bpp_regs { |
| /* DMA registers */ |
| __volatile__ __u32 p_csr; /* DMA Control/Status Register */ |
| __volatile__ __u32 p_addr; /* Address Register */ |
| __volatile__ __u32 p_bcnt; /* Byte Count Register */ |
| __volatile__ __u32 p_tst_csr; /* Test Control/Status (DMA2 only) */ |
| /* Parallel Port registers */ |
| __volatile__ __u16 p_hcr; /* Hardware Configuration Register */ |
| __volatile__ __u16 p_ocr; /* Operation Configuration Register */ |
| __volatile__ __u8 p_dr; /* Parallel Data Register */ |
| __volatile__ __u8 p_tcr; /* Transfer Control Register */ |
| __volatile__ __u8 p_or; /* Output Register */ |
| __volatile__ __u8 p_ir; /* Input Register */ |
| __volatile__ __u16 p_icr; /* Interrupt Control Register */ |
| }; |
| |
| /* P_HCR. Time is in increments of SBus clock. */ |
| #define P_HCR_TEST 0x8000 /* Allows buried counters to be read */ |
| #define P_HCR_DSW 0x7f00 /* Data strobe width (in ticks) */ |
| #define P_HCR_DDS 0x007f /* Data setup before strobe (in ticks) */ |
| |
| /* P_OCR. */ |
| #define P_OCR_MEM_CLR 0x8000 |
| #define P_OCR_DATA_SRC 0x4000 /* ) */ |
| #define P_OCR_DS_DSEL 0x2000 /* ) Bidirectional */ |
| #define P_OCR_BUSY_DSEL 0x1000 /* ) selects */ |
| #define P_OCR_ACK_DSEL 0x0800 /* ) */ |
| #define P_OCR_EN_DIAG 0x0400 |
| #define P_OCR_BUSY_OP 0x0200 /* Busy operation */ |
| #define P_OCR_ACK_OP 0x0100 /* Ack operation */ |
| #define P_OCR_SRST 0x0080 /* Reset state machines. Not selfcleaning. */ |
| #define P_OCR_IDLE 0x0008 /* PP data transfer state machine is idle */ |
| #define P_OCR_V_ILCK 0x0002 /* Versatec faded. Zebra only. */ |
| #define P_OCR_EN_VER 0x0001 /* Enable Versatec (0 - enable). Zebra only. */ |
| |
| /* P_TCR */ |
| #define P_TCR_DIR 0x08 |
| #define P_TCR_BUSY 0x04 |
| #define P_TCR_ACK 0x02 |
| #define P_TCR_DS 0x01 /* Strobe */ |
| |
| /* P_OR */ |
| #define P_OR_V3 0x20 /* ) */ |
| #define P_OR_V2 0x10 /* ) on Zebra only */ |
| #define P_OR_V1 0x08 /* ) */ |
| #define P_OR_INIT 0x04 |
| #define P_OR_AFXN 0x02 /* Auto Feed */ |
| #define P_OR_SLCT_IN 0x01 |
| |
| /* P_IR */ |
| #define P_IR_PE 0x04 |
| #define P_IR_SLCT 0x02 |
| #define P_IR_ERR 0x01 |
| |
| /* P_ICR */ |
| #define P_DS_IRQ 0x8000 /* RW1 */ |
| #define P_ACK_IRQ 0x4000 /* RW1 */ |
| #define P_BUSY_IRQ 0x2000 /* RW1 */ |
| #define P_PE_IRQ 0x1000 /* RW1 */ |
| #define P_SLCT_IRQ 0x0800 /* RW1 */ |
| #define P_ERR_IRQ 0x0400 /* RW1 */ |
| #define P_DS_IRQ_EN 0x0200 /* RW Always on rising edge */ |
| #define P_ACK_IRQ_EN 0x0100 /* RW Always on rising edge */ |
| #define P_BUSY_IRP 0x0080 /* RW 1= rising edge */ |
| #define P_BUSY_IRQ_EN 0x0040 /* RW */ |
| #define P_PE_IRP 0x0020 /* RW 1= rising edge */ |
| #define P_PE_IRQ_EN 0x0010 /* RW */ |
| #define P_SLCT_IRP 0x0008 /* RW 1= rising edge */ |
| #define P_SLCT_IRQ_EN 0x0004 /* RW */ |
| #define P_ERR_IRP 0x0002 /* RW1 1= rising edge */ |
| #define P_ERR_IRQ_EN 0x0001 /* RW */ |
| |
| #endif /* !(_ASM_SPARC64_SUNBPP_H) */ |
