| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2010-2011 Canonical Ltd <jeremy.kerr@canonical.com> |
| * Copyright (C) 2011-2012 Linaro Ltd <mturquette@linaro.org> |
| * |
| * Standard functionality for the common clock API. See Documentation/driver-api/clk.rst |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/clk-provider.h> |
| #include <linux/clk/clk-conf.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/spinlock.h> |
| #include <linux/err.h> |
| #include <linux/list.h> |
| #include <linux/slab.h> |
| #include <linux/of.h> |
| #include <linux/device.h> |
| #include <linux/init.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/sched.h> |
| #include <linux/clkdev.h> |
| |
| #include "clk.h" |
| |
| static DEFINE_SPINLOCK(enable_lock); |
| static DEFINE_MUTEX(prepare_lock); |
| |
| static struct task_struct *prepare_owner; |
| static struct task_struct *enable_owner; |
| |
| static int prepare_refcnt; |
| static int enable_refcnt; |
| |
| static HLIST_HEAD(clk_root_list); |
| static HLIST_HEAD(clk_orphan_list); |
| static LIST_HEAD(clk_notifier_list); |
| |
| static struct hlist_head *all_lists[] = { |
| &clk_root_list, |
| &clk_orphan_list, |
| NULL, |
| }; |
| |
| /*** private data structures ***/ |
| |
| struct clk_parent_map { |
| const struct clk_hw *hw; |
| struct clk_core *core; |
| const char *fw_name; |
| const char *name; |
| int index; |
| }; |
| |
| struct clk_core { |
| const char *name; |
| const struct clk_ops *ops; |
| struct clk_hw *hw; |
| struct module *owner; |
| struct device *dev; |
| struct device_node *of_node; |
| struct clk_core *parent; |
| struct clk_parent_map *parents; |
| u8 num_parents; |
| u8 new_parent_index; |
| unsigned long rate; |
| unsigned long req_rate; |
| unsigned long new_rate; |
| struct clk_core *new_parent; |
| struct clk_core *new_child; |
| unsigned long flags; |
| bool orphan; |
| bool rpm_enabled; |
| unsigned int enable_count; |
| unsigned int prepare_count; |
| unsigned int protect_count; |
| unsigned long min_rate; |
| unsigned long max_rate; |
| unsigned long accuracy; |
| int phase; |
| struct clk_duty duty; |
| struct hlist_head children; |
| struct hlist_node child_node; |
| struct hlist_head clks; |
| unsigned int notifier_count; |
| #ifdef CONFIG_DEBUG_FS |
| struct dentry *dentry; |
| struct hlist_node debug_node; |
| #endif |
| struct kref ref; |
| }; |
| |
| #define CREATE_TRACE_POINTS |
| #include <trace/events/clk.h> |
| |
| struct clk { |
| struct clk_core *core; |
| struct device *dev; |
| const char *dev_id; |
| const char *con_id; |
| unsigned long min_rate; |
| unsigned long max_rate; |
| unsigned int exclusive_count; |
| struct hlist_node clks_node; |
| }; |
| |
| /*** runtime pm ***/ |
| static int clk_pm_runtime_get(struct clk_core *core) |
| { |
| int ret; |
| |
| if (!core->rpm_enabled) |
| return 0; |
| |
| ret = pm_runtime_get_sync(core->dev); |
| if (ret < 0) { |
| pm_runtime_put_noidle(core->dev); |
| return ret; |
| } |
| return 0; |
| } |
| |
| static void clk_pm_runtime_put(struct clk_core *core) |
| { |
| if (!core->rpm_enabled) |
| return; |
| |
| pm_runtime_put_sync(core->dev); |
| } |
| |
| /*** locking ***/ |
| static void clk_prepare_lock(void) |
| { |
| if (!mutex_trylock(&prepare_lock)) { |
| if (prepare_owner == current) { |
| prepare_refcnt++; |
| return; |
| } |
| mutex_lock(&prepare_lock); |
| } |
| WARN_ON_ONCE(prepare_owner != NULL); |
| WARN_ON_ONCE(prepare_refcnt != 0); |
| prepare_owner = current; |
| prepare_refcnt = 1; |
| } |
| |
| static void clk_prepare_unlock(void) |
| { |
| WARN_ON_ONCE(prepare_owner != current); |
| WARN_ON_ONCE(prepare_refcnt == 0); |
| |
| if (--prepare_refcnt) |
| return; |
| prepare_owner = NULL; |
| mutex_unlock(&prepare_lock); |
| } |
| |
| static unsigned long clk_enable_lock(void) |
| __acquires(enable_lock) |
| { |
| unsigned long flags; |
| |
| /* |
| * On UP systems, spin_trylock_irqsave() always returns true, even if |
| * we already hold the lock. So, in that case, we rely only on |
| * reference counting. |
| */ |
| if (!IS_ENABLED(CONFIG_SMP) || |
| !spin_trylock_irqsave(&enable_lock, flags)) { |
| if (enable_owner == current) { |
| enable_refcnt++; |
| __acquire(enable_lock); |
| if (!IS_ENABLED(CONFIG_SMP)) |
| local_save_flags(flags); |
| return flags; |
| } |
| spin_lock_irqsave(&enable_lock, flags); |
| } |
| WARN_ON_ONCE(enable_owner != NULL); |
| WARN_ON_ONCE(enable_refcnt != 0); |
| enable_owner = current; |
| enable_refcnt = 1; |
| return flags; |
| } |
| |
| static void clk_enable_unlock(unsigned long flags) |
| __releases(enable_lock) |
| { |
| WARN_ON_ONCE(enable_owner != current); |
| WARN_ON_ONCE(enable_refcnt == 0); |
| |
| if (--enable_refcnt) { |
| __release(enable_lock); |
| return; |
| } |
| enable_owner = NULL; |
| spin_unlock_irqrestore(&enable_lock, flags); |
| } |
| |
| static bool clk_core_rate_is_protected(struct clk_core *core) |
| { |
| return core->protect_count; |
| } |
| |
| static bool clk_core_is_prepared(struct clk_core *core) |
| { |
| bool ret = false; |
| |
| /* |
| * .is_prepared is optional for clocks that can prepare |
| * fall back to software usage counter if it is missing |
| */ |
| if (!core->ops->is_prepared) |
| return core->prepare_count; |
| |
| if (!clk_pm_runtime_get(core)) { |
| ret = core->ops->is_prepared(core->hw); |
| clk_pm_runtime_put(core); |
| } |
| |
| return ret; |
| } |
| |
| static bool clk_core_is_enabled(struct clk_core *core) |
| { |
| bool ret = false; |
| |
| /* |
| * .is_enabled is only mandatory for clocks that gate |
| * fall back to software usage counter if .is_enabled is missing |
| */ |
| if (!core->ops->is_enabled) |
| return core->enable_count; |
| |
| /* |
| * Check if clock controller's device is runtime active before |
| * calling .is_enabled callback. If not, assume that clock is |
| * disabled, because we might be called from atomic context, from |
| * which pm_runtime_get() is not allowed. |
| * This function is called mainly from clk_disable_unused_subtree, |
| * which ensures proper runtime pm activation of controller before |
| * taking enable spinlock, but the below check is needed if one tries |
| * to call it from other places. |
| */ |
| if (core->rpm_enabled) { |
| pm_runtime_get_noresume(core->dev); |
| if (!pm_runtime_active(core->dev)) { |
| ret = false; |
| goto done; |
| } |
| } |
| |
| ret = core->ops->is_enabled(core->hw); |
| done: |
| if (core->rpm_enabled) |
| pm_runtime_put(core->dev); |
| |
| return ret; |
| } |
| |
| /*** helper functions ***/ |
| |
| const char *__clk_get_name(const struct clk *clk) |
| { |
| return !clk ? NULL : clk->core->name; |
| } |
| EXPORT_SYMBOL_GPL(__clk_get_name); |
| |
| const char *clk_hw_get_name(const struct clk_hw *hw) |
| { |
| return hw->core->name; |
| } |
| EXPORT_SYMBOL_GPL(clk_hw_get_name); |
| |
| struct clk_hw *__clk_get_hw(struct clk *clk) |
| { |
| return !clk ? NULL : clk->core->hw; |
| } |
| EXPORT_SYMBOL_GPL(__clk_get_hw); |
| |
| unsigned int clk_hw_get_num_parents(const struct clk_hw *hw) |
| { |
| return hw->core->num_parents; |
| } |
| EXPORT_SYMBOL_GPL(clk_hw_get_num_parents); |
| |
| struct clk_hw *clk_hw_get_parent(const struct clk_hw *hw) |
| { |
| return hw->core->parent ? hw->core->parent->hw : NULL; |
| } |
| EXPORT_SYMBOL_GPL(clk_hw_get_parent); |
| |
| static struct clk_core *__clk_lookup_subtree(const char *name, |
| struct clk_core *core) |
| { |
| struct clk_core *child; |
| struct clk_core *ret; |
| |
| if (!strcmp(core->name, name)) |
| return core; |
| |
| hlist_for_each_entry(child, &core->children, child_node) { |
| ret = __clk_lookup_subtree(name, child); |
| if (ret) |
| return ret; |
| } |
| |
| return NULL; |
| } |
| |
| static struct clk_core *clk_core_lookup(const char *name) |
| { |
| struct clk_core *root_clk; |
| struct clk_core *ret; |
| |
| if (!name) |
| return NULL; |
| |
| /* search the 'proper' clk tree first */ |
| hlist_for_each_entry(root_clk, &clk_root_list, child_node) { |
| ret = __clk_lookup_subtree(name, root_clk); |
| if (ret) |
| return ret; |
| } |
| |
| /* if not found, then search the orphan tree */ |
| hlist_for_each_entry(root_clk, &clk_orphan_list, child_node) { |
| ret = __clk_lookup_subtree(name, root_clk); |
| if (ret) |
| return ret; |
| } |
| |
| return NULL; |
| } |
| |
| #ifdef CONFIG_OF |
| static int of_parse_clkspec(const struct device_node *np, int index, |
| const char *name, struct of_phandle_args *out_args); |
| static struct clk_hw * |
| of_clk_get_hw_from_clkspec(struct of_phandle_args *clkspec); |
| #else |
| static inline int of_parse_clkspec(const struct device_node *np, int index, |
| const char *name, |
| struct of_phandle_args *out_args) |
| { |
| return -ENOENT; |
| } |
| static inline struct clk_hw * |
| of_clk_get_hw_from_clkspec(struct of_phandle_args *clkspec) |
| { |
| return ERR_PTR(-ENOENT); |
| } |
| #endif |
| |
| /** |
| * clk_core_get - Find the clk_core parent of a clk |
| * @core: clk to find parent of |
| * @p_index: parent index to search for |
| * |
| * This is the preferred method for clk providers to find the parent of a |
| * clk when that parent is external to the clk controller. The parent_names |
| * array is indexed and treated as a local name matching a string in the device |
| * node's 'clock-names' property or as the 'con_id' matching the device's |
| * dev_name() in a clk_lookup. This allows clk providers to use their own |
| * namespace instead of looking for a globally unique parent string. |
| * |
| * For example the following DT snippet would allow a clock registered by the |
| * clock-controller@c001 that has a clk_init_data::parent_data array |
| * with 'xtal' in the 'name' member to find the clock provided by the |
| * clock-controller@f00abcd without needing to get the globally unique name of |
| * the xtal clk. |
| * |
| * parent: clock-controller@f00abcd { |
| * reg = <0xf00abcd 0xabcd>; |
| * #clock-cells = <0>; |
| * }; |
| * |
| * clock-controller@c001 { |
| * reg = <0xc001 0xf00d>; |
| * clocks = <&parent>; |
| * clock-names = "xtal"; |
| * #clock-cells = <1>; |
| * }; |
| * |
| * Returns: -ENOENT when the provider can't be found or the clk doesn't |
| * exist in the provider or the name can't be found in the DT node or |
| * in a clkdev lookup. NULL when the provider knows about the clk but it |
| * isn't provided on this system. |
| * A valid clk_core pointer when the clk can be found in the provider. |
| */ |
| static struct clk_core *clk_core_get(struct clk_core *core, u8 p_index) |
| { |
| const char *name = core->parents[p_index].fw_name; |
| int index = core->parents[p_index].index; |
| struct clk_hw *hw = ERR_PTR(-ENOENT); |
| struct device *dev = core->dev; |
| const char *dev_id = dev ? dev_name(dev) : NULL; |
| struct device_node *np = core->of_node; |
| struct of_phandle_args clkspec; |
| |
| if (np && (name || index >= 0) && |
| !of_parse_clkspec(np, index, name, &clkspec)) { |
| hw = of_clk_get_hw_from_clkspec(&clkspec); |
| of_node_put(clkspec.np); |
| } else if (name) { |
| /* |
| * If the DT search above couldn't find the provider fallback to |
| * looking up via clkdev based clk_lookups. |
| */ |
| hw = clk_find_hw(dev_id, name); |
| } |
| |
| if (IS_ERR(hw)) |
| return ERR_CAST(hw); |
| |
| return hw->core; |
| } |
| |
| static void clk_core_fill_parent_index(struct clk_core *core, u8 index) |
| { |
| struct clk_parent_map *entry = &core->parents[index]; |
| struct clk_core *parent = ERR_PTR(-ENOENT); |
| |
| if (entry->hw) { |
| parent = entry->hw->core; |
| /* |
| * We have a direct reference but it isn't registered yet? |
| * Orphan it and let clk_reparent() update the orphan status |
| * when the parent is registered. |
| */ |
| if (!parent) |
| parent = ERR_PTR(-EPROBE_DEFER); |
| } else { |
| parent = clk_core_get(core, index); |
| if (PTR_ERR(parent) == -ENOENT && entry->name) |
| parent = clk_core_lookup(entry->name); |
| } |
| |
| /* Only cache it if it's not an error */ |
| if (!IS_ERR(parent)) |
| entry->core = parent; |
| } |
| |
| static struct clk_core *clk_core_get_parent_by_index(struct clk_core *core, |
| u8 index) |
| { |
| if (!core || index >= core->num_parents || !core->parents) |
| return NULL; |
| |
| if (!core->parents[index].core) |
| clk_core_fill_parent_index(core, index); |
| |
| return core->parents[index].core; |
| } |
| |
| struct clk_hw * |
| clk_hw_get_parent_by_index(const struct clk_hw *hw, unsigned int index) |
| { |
| struct clk_core *parent; |
| |
| parent = clk_core_get_parent_by_index(hw->core, index); |
| |
| return !parent ? NULL : parent->hw; |
| } |
| EXPORT_SYMBOL_GPL(clk_hw_get_parent_by_index); |
| |
| unsigned int __clk_get_enable_count(struct clk *clk) |
| { |
| return !clk ? 0 : clk->core->enable_count; |
| } |
| |
| static unsigned long clk_core_get_rate_nolock(struct clk_core *core) |
| { |
| if (!core) |
| return 0; |
| |
| if (!core->num_parents || core->parent) |
| return core->rate; |
| |
| /* |
| * Clk must have a parent because num_parents > 0 but the parent isn't |
| * known yet. Best to return 0 as the rate of this clk until we can |
| * properly recalc the rate based on the parent's rate. |
| */ |
| return 0; |
| } |
| |
| unsigned long clk_hw_get_rate(const struct clk_hw *hw) |
| { |
| return clk_core_get_rate_nolock(hw->core); |
| } |
| EXPORT_SYMBOL_GPL(clk_hw_get_rate); |
| |
| static unsigned long clk_core_get_accuracy_no_lock(struct clk_core *core) |
| { |
| if (!core) |
| return 0; |
| |
| return core->accuracy; |
| } |
| |
| unsigned long __clk_get_flags(struct clk *clk) |
| { |
| return !clk ? 0 : clk->core->flags; |
| } |
| EXPORT_SYMBOL_GPL(__clk_get_flags); |
| |
| unsigned long clk_hw_get_flags(const struct clk_hw *hw) |
| { |
| return hw->core->flags; |
| } |
| EXPORT_SYMBOL_GPL(clk_hw_get_flags); |
| |
| bool clk_hw_is_prepared(const struct clk_hw *hw) |
| { |
| return clk_core_is_prepared(hw->core); |
| } |
| EXPORT_SYMBOL_GPL(clk_hw_is_prepared); |
| |
| bool clk_hw_rate_is_protected(const struct clk_hw *hw) |
| { |
| return clk_core_rate_is_protected(hw->core); |
| } |
| EXPORT_SYMBOL_GPL(clk_hw_rate_is_protected); |
| |
| bool clk_hw_is_enabled(const struct clk_hw *hw) |
| { |
| return clk_core_is_enabled(hw->core); |
| } |
| EXPORT_SYMBOL_GPL(clk_hw_is_enabled); |
| |
| bool __clk_is_enabled(struct clk *clk) |
| { |
| if (!clk) |
| return false; |
| |
| return clk_core_is_enabled(clk->core); |
| } |
| EXPORT_SYMBOL_GPL(__clk_is_enabled); |
| |
| static bool mux_is_better_rate(unsigned long rate, unsigned long now, |
| unsigned long best, unsigned long flags) |
| { |
| if (flags & CLK_MUX_ROUND_CLOSEST) |
| return abs(now - rate) < abs(best - rate); |
| |
| return now <= rate && now > best; |
| } |
| |
| int clk_mux_determine_rate_flags(struct clk_hw *hw, |
| struct clk_rate_request *req, |
| unsigned long flags) |
| { |
| struct clk_core *core = hw->core, *parent, *best_parent = NULL; |
| int i, num_parents, ret; |
| unsigned long best = 0; |
| struct clk_rate_request parent_req = *req; |
| |
| /* if NO_REPARENT flag set, pass through to current parent */ |
| if (core->flags & CLK_SET_RATE_NO_REPARENT) { |
| parent = core->parent; |
| if (core->flags & CLK_SET_RATE_PARENT) { |
| ret = __clk_determine_rate(parent ? parent->hw : NULL, |
| &parent_req); |
| if (ret) |
| return ret; |
| |
| best = parent_req.rate; |
| } else if (parent) { |
| best = clk_core_get_rate_nolock(parent); |
| } else { |
| best = clk_core_get_rate_nolock(core); |
| } |
| |
| goto out; |
| } |
| |
| /* find the parent that can provide the fastest rate <= rate */ |
| num_parents = core->num_parents; |
| for (i = 0; i < num_parents; i++) { |
| parent = clk_core_get_parent_by_index(core, i); |
| if (!parent) |
| continue; |
| |
| if (core->flags & CLK_SET_RATE_PARENT) { |
| parent_req = *req; |
| ret = __clk_determine_rate(parent->hw, &parent_req); |
| if (ret) |
| continue; |
| } else { |
| parent_req.rate = clk_core_get_rate_nolock(parent); |
| } |
| |
| if (mux_is_better_rate(req->rate, parent_req.rate, |
| best, flags)) { |
| best_parent = parent; |
| best = parent_req.rate; |
| } |
| } |
| |
| if (!best_parent) |
| return -EINVAL; |
| |
| out: |
| if (best_parent) |
| req->best_parent_hw = best_parent->hw; |
| req->best_parent_rate = best; |
| req->rate = best; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(clk_mux_determine_rate_flags); |
| |
| struct clk *__clk_lookup(const char *name) |
| { |
| struct clk_core *core = clk_core_lookup(name); |
| |
| return !core ? NULL : core->hw->clk; |
| } |
| |
| static void clk_core_get_boundaries(struct clk_core *core, |
| unsigned long *min_rate, |
| unsigned long *max_rate) |
| { |
| struct clk *clk_user; |
| |
| lockdep_assert_held(&prepare_lock); |
| |
| *min_rate = core->min_rate; |
| *max_rate = core->max_rate; |
| |
| hlist_for_each_entry(clk_user, &core->clks, clks_node) |
| *min_rate = max(*min_rate, clk_user->min_rate); |
| |
| hlist_for_each_entry(clk_user, &core->clks, clks_node) |
| *max_rate = min(*max_rate, clk_user->max_rate); |
| } |
| |
| void clk_hw_set_rate_range(struct clk_hw *hw, unsigned long min_rate, |
| unsigned long max_rate) |
| { |
| hw->core->min_rate = min_rate; |
| hw->core->max_rate = max_rate; |
| } |
| EXPORT_SYMBOL_GPL(clk_hw_set_rate_range); |
| |
| /* |
| * __clk_mux_determine_rate - clk_ops::determine_rate implementation for a mux type clk |
| * @hw: mux type clk to determine rate on |
| * @req: rate request, also used to return preferred parent and frequencies |
| * |
| * Helper for finding best parent to provide a given frequency. This can be used |
| * directly as a determine_rate callback (e.g. for a mux), or from a more |
| * complex clock that may combine a mux with other operations. |
| * |
| * Returns: 0 on success, -EERROR value on error |
| */ |
| int __clk_mux_determine_rate(struct clk_hw *hw, |
| struct clk_rate_request *req) |
| { |
| return clk_mux_determine_rate_flags(hw, req, 0); |
| } |
| EXPORT_SYMBOL_GPL(__clk_mux_determine_rate); |
| |
| int __clk_mux_determine_rate_closest(struct clk_hw *hw, |
| struct clk_rate_request *req) |
| { |
| return clk_mux_determine_rate_flags(hw, req, CLK_MUX_ROUND_CLOSEST); |
| } |
| EXPORT_SYMBOL_GPL(__clk_mux_determine_rate_closest); |
| |
| /*** clk api ***/ |
| |
| static void clk_core_rate_unprotect(struct clk_core *core) |
| { |
| lockdep_assert_held(&prepare_lock); |
| |
| if (!core) |
| return; |
| |
| if (WARN(core->protect_count == 0, |
| "%s already unprotected\n", core->name)) |
| return; |
| |
| if (--core->protect_count > 0) |
| return; |
| |
| clk_core_rate_unprotect(core->parent); |
| } |
| |
| static int clk_core_rate_nuke_protect(struct clk_core *core) |
| { |
| int ret; |
| |
| lockdep_assert_held(&prepare_lock); |
| |
| if (!core) |
| return -EINVAL; |
| |
| if (core->protect_count == 0) |
| return 0; |
| |
| ret = core->protect_count; |
| core->protect_count = 1; |
| clk_core_rate_unprotect(core); |
| |
| return ret; |
| } |
| |
| /** |
| * clk_rate_exclusive_put - release exclusivity over clock rate control |
| * @clk: the clk over which the exclusivity is released |
| * |
| * clk_rate_exclusive_put() completes a critical section during which a clock |
| * consumer cannot tolerate any other consumer making any operation on the |
| * clock which could result in a rate change or rate glitch. Exclusive clocks |
| * cannot have their rate changed, either directly or indirectly due to changes |
| * further up the parent chain of clocks. As a result, clocks up parent chain |
| * also get under exclusive control of the calling consumer. |
| * |
| * If exlusivity is claimed more than once on clock, even by the same consumer, |
| * the rate effectively gets locked as exclusivity can't be preempted. |
| * |
| * Calls to clk_rate_exclusive_put() must be balanced with calls to |
| * clk_rate_exclusive_get(). Calls to this function may sleep, and do not return |
| * error status. |
| */ |
| void clk_rate_exclusive_put(struct clk *clk) |
| { |
| if (!clk) |
| return; |
| |
| clk_prepare_lock(); |
| |
| /* |
| * if there is something wrong with this consumer protect count, stop |
| * here before messing with the provider |
| */ |
| if (WARN_ON(clk->exclusive_count <= 0)) |
| goto out; |
| |
| clk_core_rate_unprotect(clk->core); |
| clk->exclusive_count--; |
| out: |
| clk_prepare_unlock(); |
| } |
| EXPORT_SYMBOL_GPL(clk_rate_exclusive_put); |
| |
| static void clk_core_rate_protect(struct clk_core *core) |
| { |
| lockdep_assert_held(&prepare_lock); |
| |
| if (!core) |
| return; |
| |
| if (core->protect_count == 0) |
| clk_core_rate_protect(core->parent); |
| |
| core->protect_count++; |
| } |
| |
| static void clk_core_rate_restore_protect(struct clk_core *core, int count) |
| { |
| lockdep_assert_held(&prepare_lock); |
| |
| if (!core) |
| return; |
| |
| if (count == 0) |
| return; |
| |
| clk_core_rate_protect(core); |
| core->protect_count = count; |
| } |
| |
| /** |
| * clk_rate_exclusive_get - get exclusivity over the clk rate control |
| * @clk: the clk over which the exclusity of rate control is requested |
| * |
| * clk_rate_exclusive_get() begins a critical section during which a clock |
| * consumer cannot tolerate any other consumer making any operation on the |
| * clock which could result in a rate change or rate glitch. Exclusive clocks |
| * cannot have their rate changed, either directly or indirectly due to changes |
| * further up the parent chain of clocks. As a result, clocks up parent chain |
| * also get under exclusive control of the calling consumer. |
| * |
| * If exlusivity is claimed more than once on clock, even by the same consumer, |
| * the rate effectively gets locked as exclusivity can't be preempted. |
| * |
| * Calls to clk_rate_exclusive_get() should be balanced with calls to |
| * clk_rate_exclusive_put(). Calls to this function may sleep. |
| * Returns 0 on success, -EERROR otherwise |
| */ |
| int clk_rate_exclusive_get(struct clk *clk) |
| { |
| if (!clk) |
| return 0; |
| |
| clk_prepare_lock(); |
| clk_core_rate_protect(clk->core); |
| clk->exclusive_count++; |
| clk_prepare_unlock(); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(clk_rate_exclusive_get); |
| |
| static void clk_core_unprepare(struct clk_core *core) |
| { |
| lockdep_assert_held(&prepare_lock); |
| |
| if (!core) |
| return; |
| |
| if (WARN(core->prepare_count == 0, |
| "%s already unprepared\n", core->name)) |
| return; |
| |
| if (WARN(core->prepare_count == 1 && core->flags & CLK_IS_CRITICAL, |
| "Unpreparing critical %s\n", core->name)) |
| return; |
| |
| if (core->flags & CLK_SET_RATE_GATE) |
| clk_core_rate_unprotect(core); |
| |
| if (--core->prepare_count > 0) |
| return; |
| |
| WARN(core->enable_count > 0, "Unpreparing enabled %s\n", core->name); |
| |
| trace_clk_unprepare(core); |
| |
| if (core->ops->unprepare) |
| core->ops->unprepare(core->hw); |
| |
| clk_pm_runtime_put(core); |
| |
| trace_clk_unprepare_complete(core); |
| clk_core_unprepare(core->parent); |
| } |
| |
| static void clk_core_unprepare_lock(struct clk_core *core) |
| { |
| clk_prepare_lock(); |
| clk_core_unprepare(core); |
| clk_prepare_unlock(); |
| } |
| |
| /** |
| * clk_unprepare - undo preparation of a clock source |
| * @clk: the clk being unprepared |
| * |
| * clk_unprepare may sleep, which differentiates it from clk_disable. In a |
| * simple case, clk_unprepare can be used instead of clk_disable to gate a clk |
| * if the operation may sleep. One example is a clk which is accessed over |
| * I2c. In the complex case a clk gate operation may require a fast and a slow |
| * part. It is this reason that clk_unprepare and clk_disable are not mutually |
| * exclusive. In fact clk_disable must be called before clk_unprepare. |
| */ |
| void clk_unprepare(struct clk *clk) |
| { |
| if (IS_ERR_OR_NULL(clk)) |
| return; |
| |
| clk_core_unprepare_lock(clk->core); |
| } |
| EXPORT_SYMBOL_GPL(clk_unprepare); |
| |
| static int clk_core_prepare(struct clk_core *core) |
| { |
| int ret = 0; |
| |
| lockdep_assert_held(&prepare_lock); |
| |
| if (!core) |
| return 0; |
| |
| if (core->prepare_count == 0) { |
| ret = clk_pm_runtime_get(core); |
| if (ret) |
| return ret; |
| |
| ret = clk_core_prepare(core->parent); |
| if (ret) |
| goto runtime_put; |
| |
| trace_clk_prepare(core); |
| |
| if (core->ops->prepare) |
| ret = core->ops->prepare(core->hw); |
| |
| trace_clk_prepare_complete(core); |
| |
| if (ret) |
| goto unprepare; |
| } |
| |
| core->prepare_count++; |
| |
| /* |
| * CLK_SET_RATE_GATE is a special case of clock protection |
| * Instead of a consumer claiming exclusive rate control, it is |
| * actually the provider which prevents any consumer from making any |
| * operation which could result in a rate change or rate glitch while |
| * the clock is prepared. |
| */ |
| if (core->flags & CLK_SET_RATE_GATE) |
| clk_core_rate_protect(core); |
| |
| return 0; |
| unprepare: |
| clk_core_unprepare(core->parent); |
| runtime_put: |
| clk_pm_runtime_put(core); |
| return ret; |
| } |
| |
| static int clk_core_prepare_lock(struct clk_core *core) |
| { |
| int ret; |
| |
| clk_prepare_lock(); |
| ret = clk_core_prepare(core); |
| clk_prepare_unlock(); |
| |
| return ret; |
| } |
| |
| /** |
| * clk_prepare - prepare a clock source |
| * @clk: the clk being prepared |
| * |
| * clk_prepare may sleep, which differentiates it from clk_enable. In a simple |
| * case, clk_prepare can be used instead of clk_enable to ungate a clk if the |
| * operation may sleep. One example is a clk which is accessed over I2c. In |
| * the complex case a clk ungate operation may require a fast and a slow part. |
| * It is this reason that clk_prepare and clk_enable are not mutually |
| * exclusive. In fact clk_prepare must be called before clk_enable. |
| * Returns 0 on success, -EERROR otherwise. |
| */ |
| int clk_prepare(struct clk *clk) |
| { |
| if (!clk) |
| return 0; |
| |
| return clk_core_prepare_lock(clk->core); |
| } |
| EXPORT_SYMBOL_GPL(clk_prepare); |
| |
| static void clk_core_disable(struct clk_core *core) |
| { |
| lockdep_assert_held(&enable_lock); |
| |
| if (!core) |
| return; |
| |
| if (WARN(core->enable_count == 0, "%s already disabled\n", core->name)) |
| return; |
| |
| if (WARN(core->enable_count == 1 && core->flags & CLK_IS_CRITICAL, |
| "Disabling critical %s\n", core->name)) |
| return; |
| |
| if (--core->enable_count > 0) |
| return; |
| |
| trace_clk_disable_rcuidle(core); |
| |
| if (core->ops->disable) |
| core->ops->disable(core->hw); |
| |
| trace_clk_disable_complete_rcuidle(core); |
| |
| clk_core_disable(core->parent); |
| } |
| |
| static void clk_core_disable_lock(struct clk_core *core) |
| { |
| unsigned long flags; |
| |
| flags = clk_enable_lock(); |
| clk_core_disable(core); |
| clk_enable_unlock(flags); |
| } |
| |
| /** |
| * clk_disable - gate a clock |
| * @clk: the clk being gated |
| * |
| * clk_disable must not sleep, which differentiates it from clk_unprepare. In |
| * a simple case, clk_disable can be used instead of clk_unprepare to gate a |
| * clk if the operation is fast and will never sleep. One example is a |
| * SoC-internal clk which is controlled via simple register writes. In the |
| * complex case a clk gate operation may require a fast and a slow part. It is |
| * this reason that clk_unprepare and clk_disable are not mutually exclusive. |
| * In fact clk_disable must be called before clk_unprepare. |
| */ |
| void clk_disable(struct clk *clk) |
| { |
| if (IS_ERR_OR_NULL(clk)) |
| return; |
| |
| clk_core_disable_lock(clk->core); |
| } |
| EXPORT_SYMBOL_GPL(clk_disable); |
| |
| static int clk_core_enable(struct clk_core *core) |
| { |
| int ret = 0; |
| |
| lockdep_assert_held(&enable_lock); |
| |
| if (!core) |
| return 0; |
| |
| if (WARN(core->prepare_count == 0, |
| "Enabling unprepared %s\n", core->name)) |
| return -ESHUTDOWN; |
| |
| if (core->enable_count == 0) { |
| ret = clk_core_enable(core->parent); |
| |
| if (ret) |
| return ret; |
| |
| trace_clk_enable_rcuidle(core); |
| |
| if (core->ops->enable) |
| ret = core->ops->enable(core->hw); |
| |
| trace_clk_enable_complete_rcuidle(core); |
| |
| if (ret) { |
| clk_core_disable(core->parent); |
| return ret; |
| } |
| } |
| |
| core->enable_count++; |
| return 0; |
| } |
| |
| static int clk_core_enable_lock(struct clk_core *core) |
| { |
| unsigned long flags; |
| int ret; |
| |
| flags = clk_enable_lock(); |
| ret = clk_core_enable(core); |
| clk_enable_unlock(flags); |
| |
| return ret; |
| } |
| |
| /** |
| * clk_gate_restore_context - restore context for poweroff |
| * @hw: the clk_hw pointer of clock whose state is to be restored |
| * |
| * The clock gate restore context function enables or disables |
| * the gate clocks based on the enable_count. This is done in cases |
| * where the clock context is lost and based on the enable_count |
| * the clock either needs to be enabled/disabled. This |
| * helps restore the state of gate clocks. |
| */ |
| void clk_gate_restore_context(struct clk_hw *hw) |
| { |
| struct clk_core *core = hw->core; |
| |
| if (core->enable_count) |
| core->ops->enable(hw); |
| else |
| core->ops->disable(hw); |
| } |
| EXPORT_SYMBOL_GPL(clk_gate_restore_context); |
| |
| static int clk_core_save_context(struct clk_core *core) |
| { |
| struct clk_core *child; |
| int ret = 0; |
| |
| hlist_for_each_entry(child, &core->children, child_node) { |
| ret = clk_core_save_context(child); |
| if (ret < 0) |
| return ret; |
| } |
| |
| if (core->ops && core->ops->save_context) |
| ret = core->ops->save_context(core->hw); |
| |
| return ret; |
| } |
| |
| static void clk_core_restore_context(struct clk_core *core) |
| { |
| struct clk_core *child; |
| |
| if (core->ops && core->ops->restore_context) |
| core->ops->restore_context(core->hw); |
| |
| hlist_for_each_entry(child, &core->children, child_node) |
| clk_core_restore_context(child); |
| } |
| |
| /** |
| * clk_save_context - save clock context for poweroff |
| * |
| * Saves the context of the clock register for powerstates in which the |
| * contents of the registers will be lost. Occurs deep within the suspend |
| * code. Returns 0 on success. |
| */ |
| int clk_save_context(void) |
| { |
| struct clk_core *clk; |
| int ret; |
| |
| hlist_for_each_entry(clk, &clk_root_list, child_node) { |
| ret = clk_core_save_context(clk); |
| if (ret < 0) |
| return ret; |
| } |
| |
| hlist_for_each_entry(clk, &clk_orphan_list, child_node) { |
| ret = clk_core_save_context(clk); |
| if (ret < 0) |
| return ret; |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(clk_save_context); |
| |
| /** |
| * clk_restore_context - restore clock context after poweroff |
| * |
| * Restore the saved clock context upon resume. |
| * |
| */ |
| void clk_restore_context(void) |
| { |
| struct clk_core *core; |
| |
| hlist_for_each_entry(core, &clk_root_list, child_node) |
| clk_core_restore_context(core); |
| |
| hlist_for_each_entry(core, &clk_orphan_list, child_node) |
| clk_core_restore_context(core); |
| } |
| EXPORT_SYMBOL_GPL(clk_restore_context); |
| |
| /** |
| * clk_enable - ungate a clock |
| * @clk: the clk being ungated |
| * |
| * clk_enable must not sleep, which differentiates it from clk_prepare. In a |
| * simple case, clk_enable can be used instead of clk_prepare to ungate a clk |
| * if the operation will never sleep. One example is a SoC-internal clk which |
| * is controlled via simple register writes. In the complex case a clk ungate |
| * operation may require a fast and a slow part. It is this reason that |
| * clk_enable and clk_prepare are not mutually exclusive. In fact clk_prepare |
| * must be called before clk_enable. Returns 0 on success, -EERROR |
| * otherwise. |
| */ |
| int clk_enable(struct clk *clk) |
| { |
| if (!clk) |
| return 0; |
| |
| return clk_core_enable_lock(clk->core); |
| } |
| EXPORT_SYMBOL_GPL(clk_enable); |
| |
| static int clk_core_prepare_enable(struct clk_core *core) |
| { |
| int ret; |
| |
| ret = clk_core_prepare_lock(core); |
| if (ret) |
| return ret; |
| |
| ret = clk_core_enable_lock(core); |
| if (ret) |
| clk_core_unprepare_lock(core); |
| |
| return ret; |
| } |
| |
| static void clk_core_disable_unprepare(struct clk_core *core) |
| { |
| clk_core_disable_lock(core); |
| clk_core_unprepare_lock(core); |
| } |
| |
| static void __init clk_unprepare_unused_subtree(struct clk_core *core) |
| { |
| struct clk_core *child; |
| |
| lockdep_assert_held(&prepare_lock); |
| |
| hlist_for_each_entry(child, &core->children, child_node) |
| clk_unprepare_unused_subtree(child); |
| |
| if (core->prepare_count) |
| return; |
| |
| if (core->flags & CLK_IGNORE_UNUSED) |
| return; |
| |
| if (clk_pm_runtime_get(core)) |
| return; |
| |
| if (clk_core_is_prepared(core)) { |
| trace_clk_unprepare(core); |
| if (core->ops->unprepare_unused) |
| core->ops->unprepare_unused(core->hw); |
| else if (core->ops->unprepare) |
| core->ops->unprepare(core->hw); |
| trace_clk_unprepare_complete(core); |
| } |
| |
| clk_pm_runtime_put(core); |
| } |
| |
| static void __init clk_disable_unused_subtree(struct clk_core *core) |
| { |
| struct clk_core *child; |
| unsigned long flags; |
| |
| lockdep_assert_held(&prepare_lock); |
| |
| hlist_for_each_entry(child, &core->children, child_node) |
| clk_disable_unused_subtree(child); |
| |
| if (core->flags & CLK_OPS_PARENT_ENABLE) |
| clk_core_prepare_enable(core->parent); |
| |
| if (clk_pm_runtime_get(core)) |
| goto unprepare_out; |
| |
| flags = clk_enable_lock(); |
| |
| if (core->enable_count) |
| goto unlock_out; |
| |
| if (core->flags & CLK_IGNORE_UNUSED) |
| goto unlock_out; |
| |
| /* |
| * some gate clocks have special needs during the disable-unused |
| * sequence. call .disable_unused if available, otherwise fall |
| * back to .disable |
| */ |
| if (clk_core_is_enabled(core)) { |
| trace_clk_disable(core); |
| if (core->ops->disable_unused) |
| core->ops->disable_unused(core->hw); |
| else if (core->ops->disable) |
| core->ops->disable(core->hw); |
| trace_clk_disable_complete(core); |
| } |
| |
| unlock_out: |
| clk_enable_unlock(flags); |
| clk_pm_runtime_put(core); |
| unprepare_out: |
| if (core->flags & CLK_OPS_PARENT_ENABLE) |
| clk_core_disable_unprepare(core->parent); |
| } |
| |
| static bool clk_ignore_unused __initdata; |
| static int __init clk_ignore_unused_setup(char *__unused) |
| { |
| clk_ignore_unused = true; |
| return 1; |
| } |
| __setup("clk_ignore_unused", clk_ignore_unused_setup); |
| |
| static int __init clk_disable_unused(void) |
| { |
| struct clk_core *core; |
| |
| if (clk_ignore_unused) { |
| pr_warn("clk: Not disabling unused clocks\n"); |
| return 0; |
| } |
| |
| clk_prepare_lock(); |
| |
| hlist_for_each_entry(core, &clk_root_list, child_node) |
| clk_disable_unused_subtree(core); |
| |
| hlist_for_each_entry(core, &clk_orphan_list, child_node) |
| clk_disable_unused_subtree(core); |
| |
| hlist_for_each_entry(core, &clk_root_list, child_node) |
| clk_unprepare_unused_subtree(core); |
| |
| hlist_for_each_entry(core, &clk_orphan_list, child_node) |
| clk_unprepare_unused_subtree(core); |
| |
| clk_prepare_unlock(); |
| |
| return 0; |
| } |
| late_initcall_sync(clk_disable_unused); |
| |
| static int clk_core_determine_round_nolock(struct clk_core *core, |
| struct clk_rate_request *req) |
| { |
| long rate; |
| |
| lockdep_assert_held(&prepare_lock); |
| |
| if (!core) |
| return 0; |
| |
| /* |
| * At this point, core protection will be disabled if |
| * - if the provider is not protected at all |
| * - if the calling consumer is the only one which has exclusivity |
| * over the provider |
| */ |
| if (clk_core_rate_is_protected(core)) { |
| req->rate = core->rate; |
| } else if (core->ops->determine_rate) { |
| return core->ops->determine_rate(core->hw, req); |
| } else if (core->ops->round_rate) { |
| rate = core->ops->round_rate(core->hw, req->rate, |
| &req->best_parent_rate); |
| if (rate < 0) |
| return rate; |
| |
| req->rate = rate; |
| } else { |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static void clk_core_init_rate_req(struct clk_core * const core, |
| struct clk_rate_request *req) |
| { |
| struct clk_core *parent; |
| |
| if (WARN_ON(!core || !req)) |
| return; |
| |
| parent = core->parent; |
| if (parent) { |
| req->best_parent_hw = parent->hw; |
| req->best_parent_rate = parent->rate; |
| } else { |
| req->best_parent_hw = NULL; |
| req->best_parent_rate = 0; |
| } |
| } |
| |
| static bool clk_core_can_round(struct clk_core * const core) |
| { |
| return core->ops->determine_rate || core->ops->round_rate; |
| } |
| |
| static int clk_core_round_rate_nolock(struct clk_core *core, |
| struct clk_rate_request *req) |
| { |
| lockdep_assert_held(&prepare_lock); |
| |
| if (!core) { |
| req->rate = 0; |
| return 0; |
| } |
| |
| clk_core_init_rate_req(core, req); |
| |
| if (clk_core_can_round(core)) |
| return clk_core_determine_round_nolock(core, req); |
| else if (core->flags & CLK_SET_RATE_PARENT) |
| return clk_core_round_rate_nolock(core->parent, req); |
| |
| req->rate = core->rate; |
| return 0; |
| } |
| |
| /** |
| * __clk_determine_rate - get the closest rate actually supported by a clock |
| * @hw: determine the rate of this clock |
| * @req: target rate request |
| * |
| * Useful for clk_ops such as .set_rate and .determine_rate. |
| */ |
| int __clk_determine_rate(struct clk_hw *hw, struct clk_rate_request *req) |
| { |
| if (!hw) { |
| req->rate = 0; |
| return 0; |
| } |
| |
| return clk_core_round_rate_nolock(hw->core, req); |
| } |
| EXPORT_SYMBOL_GPL(__clk_determine_rate); |
| |
| unsigned long clk_hw_round_rate(struct clk_hw *hw, unsigned long rate) |
| { |
| int ret; |
| struct clk_rate_request req; |
| |
| clk_core_get_boundaries(hw->core, &req.min_rate, &req.max_rate); |
| req.rate = rate; |
| |
| ret = clk_core_round_rate_nolock(hw->core, &req); |
| if (ret) |
| return 0; |
| |
| return req.rate; |
| } |
| EXPORT_SYMBOL_GPL(clk_hw_round_rate); |
| |
| /** |
| * clk_round_rate - round the given rate for a clk |
| * @clk: the clk for which we are rounding a rate |
| * @rate: the rate which is to be rounded |
| * |
| * Takes in a rate as input and rounds it to a rate that the clk can actually |
| * use which is then returned. If clk doesn't support round_rate operation |
| * then the parent rate is returned. |
| */ |
| long clk_round_rate(struct clk *clk, unsigned long rate) |
| { |
| struct clk_rate_request req; |
| int ret; |
| |
| if (!clk) |
| return 0; |
| |
| clk_prepare_lock(); |
| |
| if (clk->exclusive_count) |
| clk_core_rate_unprotect(clk->core); |
| |
| clk_core_get_boundaries(clk->core, &req.min_rate, &req.max_rate); |
| req.rate = rate; |
| |
| ret = clk_core_round_rate_nolock(clk->core, &req); |
| |
| if (clk->exclusive_count) |
| clk_core_rate_protect(clk->core); |
| |
| clk_prepare_unlock(); |
| |
| if (ret) |
| return ret; |
| |
| return req.rate; |
| } |
| EXPORT_SYMBOL_GPL(clk_round_rate); |
| |
| /** |
| * __clk_notify - call clk notifier chain |
| * @core: clk that is changing rate |
| * @msg: clk notifier type (see include/linux/clk.h) |
| * @old_rate: old clk rate |
| * @new_rate: new clk rate |
| * |
| * Triggers a notifier call chain on the clk rate-change notification |
| * for 'clk'. Passes a pointer to the struct clk and the previous |
| * and current rates to the notifier callback. Intended to be called by |
| * internal clock code only. Returns NOTIFY_DONE from the last driver |
| * called if all went well, or NOTIFY_STOP or NOTIFY_BAD immediately if |
| * a driver returns that. |
| */ |
| static int __clk_notify(struct clk_core *core, unsigned long msg, |
| unsigned long old_rate, unsigned long new_rate) |
| { |
| struct clk_notifier *cn; |
| struct clk_notifier_data cnd; |
| int ret = NOTIFY_DONE; |
| |
| cnd.old_rate = old_rate; |
| cnd.new_rate = new_rate; |
| |
| list_for_each_entry(cn, &clk_notifier_list, node) { |
| if (cn->clk->core == core) { |
| cnd.clk = cn->clk; |
| ret = srcu_notifier_call_chain(&cn->notifier_head, msg, |
| &cnd); |
| if (ret & NOTIFY_STOP_MASK) |
| return ret; |
| } |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * __clk_recalc_accuracies |
| * @core: first clk in the subtree |
| * |
| * Walks the subtree of clks starting with clk and recalculates accuracies as |
| * it goes. Note that if a clk does not implement the .recalc_accuracy |
| * callback then it is assumed that the clock will take on the accuracy of its |
| * parent. |
| */ |
| static void __clk_recalc_accuracies(struct clk_core *core) |
| { |
| unsigned long parent_accuracy = 0; |
| struct clk_core *child; |
| |
| lockdep_assert_held(&prepare_lock); |
| |
| if (core->parent) |
| parent_accuracy = core->parent->accuracy; |
| |
| if (core->ops->recalc_accuracy) |
| core->accuracy = core->ops->recalc_accuracy(core->hw, |
| parent_accuracy); |
| else |
| core->accuracy = parent_accuracy; |
| |
| hlist_for_each_entry(child, &core->children, child_node) |
| __clk_recalc_accuracies(child); |
| } |
| |
| static long clk_core_get_accuracy_recalc(struct clk_core *core) |
| { |
| if (core && (core->flags & CLK_GET_ACCURACY_NOCACHE)) |
| __clk_recalc_accuracies(core); |
| |
| return clk_core_get_accuracy_no_lock(core); |
| } |
| |
| /** |
| * clk_get_accuracy - return the accuracy of clk |
| * @clk: the clk whose accuracy is being returned |
| * |
| * Simply returns the cached accuracy of the clk, unless |
| * CLK_GET_ACCURACY_NOCACHE flag is set, which means a recalc_rate will be |
| * issued. |
| * If clk is NULL then returns 0. |
| */ |
| long clk_get_accuracy(struct clk *clk) |
| { |
| long accuracy; |
| |
| if (!clk) |
| return 0; |
| |
| clk_prepare_lock(); |
| accuracy = clk_core_get_accuracy_recalc(clk->core); |
| clk_prepare_unlock(); |
| |
| return accuracy; |
| } |
| EXPORT_SYMBOL_GPL(clk_get_accuracy); |
| |
| static unsigned long clk_recalc(struct clk_core *core, |
| unsigned long parent_rate) |
| { |
| unsigned long rate = parent_rate; |
| |
| if (core->ops->recalc_rate && !clk_pm_runtime_get(core)) { |
| rate = core->ops->recalc_rate(core->hw, parent_rate); |
| clk_pm_runtime_put(core); |
| } |
| return rate; |
| } |
| |
| /** |
| * __clk_recalc_rates |
| * @core: first clk in the subtree |
| * @msg: notification type (see include/linux/clk.h) |
| * |
| * Walks the subtree of clks starting with clk and recalculates rates as it |
| * goes. Note that if a clk does not implement the .recalc_rate callback then |
| * it is assumed that the clock will take on the rate of its parent. |
| * |
| * clk_recalc_rates also propagates the POST_RATE_CHANGE notification, |
| * if necessary. |
| */ |
| static void __clk_recalc_rates(struct clk_core *core, unsigned long msg) |
| { |
| unsigned long old_rate; |
| unsigned long parent_rate = 0; |
| struct clk_core *child; |
| |
| lockdep_assert_held(&prepare_lock); |
| |
| old_rate = core->rate; |
| |
| if (core->parent) |
| parent_rate = core->parent->rate; |
| |
| core->rate = clk_recalc(core, parent_rate); |
| |
| /* |
| * ignore NOTIFY_STOP and NOTIFY_BAD return values for POST_RATE_CHANGE |
| * & ABORT_RATE_CHANGE notifiers |
| */ |
| if (core->notifier_count && msg) |
| __clk_notify(core, msg, old_rate, core->rate); |
| |
| hlist_for_each_entry(child, &core->children, child_node) |
| __clk_recalc_rates(child, msg); |
| } |
| |
| static unsigned long clk_core_get_rate_recalc(struct clk_core *core) |
| { |
| if (core && (core->flags & CLK_GET_RATE_NOCACHE)) |
| __clk_recalc_rates(core, 0); |
| |
| return clk_core_get_rate_nolock(core); |
| } |
| |
| /** |
| * clk_get_rate - return the rate of clk |
| * @clk: the clk whose rate is being returned |
| * |
| * Simply returns the cached rate of the clk, unless CLK_GET_RATE_NOCACHE flag |
| * is set, which means a recalc_rate will be issued. |
| * If clk is NULL then returns 0. |
| */ |
| unsigned long clk_get_rate(struct clk *clk) |
| { |
| unsigned long rate; |
| |
| if (!clk) |
| return 0; |
| |
| clk_prepare_lock(); |
| rate = clk_core_get_rate_recalc(clk->core); |
| clk_prepare_unlock(); |
| |
| return rate; |
| } |
| EXPORT_SYMBOL_GPL(clk_get_rate); |
| |
| static int clk_fetch_parent_index(struct clk_core *core, |
| struct clk_core *parent) |
| { |
| int i; |
| |
| if (!parent) |
| return -EINVAL; |
| |
| for (i = 0; i < core->num_parents; i++) { |
| /* Found it first try! */ |
| if (core->parents[i].core == parent) |
| return i; |
| |
| /* Something else is here, so keep looking */ |
| if (core->parents[i].core) |
| continue; |
| |
| /* Maybe core hasn't been cached but the hw is all we know? */ |
| if (core->parents[i].hw) { |
| if (core->parents[i].hw == parent->hw) |
| break; |
| |
| /* Didn't match, but we're expecting a clk_hw */ |
| continue; |
| } |
| |
| /* Maybe it hasn't been cached (clk_set_parent() path) */ |
| if (parent == clk_core_get(core, i)) |
| break; |
| |
| /* Fallback to comparing globally unique names */ |
| if (core->parents[i].name && |
| !strcmp(parent->name, core->parents[i].name)) |
| break; |
| } |
| |
| if (i == core->num_parents) |
| return -EINVAL; |
| |
| core->parents[i].core = parent; |
| return i; |
| } |
| |
| /** |
| * clk_hw_get_parent_index - return the index of the parent clock |
| * @hw: clk_hw associated with the clk being consumed |
| * |
| * Fetches and returns the index of parent clock. Returns -EINVAL if the given |
| * clock does not have a current parent. |
| */ |
| int clk_hw_get_parent_index(struct clk_hw *hw) |
| { |
| struct clk_hw *parent = clk_hw_get_parent(hw); |
| |
| if (WARN_ON(parent == NULL)) |
| return -EINVAL; |
| |
| return clk_fetch_parent_index(hw->core, parent->core); |
| } |
| EXPORT_SYMBOL_GPL(clk_hw_get_parent_index); |
| |
| /* |
| * Update the orphan status of @core and all its children. |
| */ |
| static void clk_core_update_orphan_status(struct clk_core *core, bool is_orphan) |
| { |
| struct clk_core *child; |
| |
| core->orphan = is_orphan; |
| |
| hlist_for_each_entry(child, &core->children, child_node) |
| clk_core_update_orphan_status(child, is_orphan); |
| } |
| |
| static void clk_reparent(struct clk_core *core, struct clk_core *new_parent) |
| { |
| bool was_orphan = core->orphan; |
| |
| hlist_del(&core->child_node); |
| |
| if (new_parent) { |
| bool becomes_orphan = new_parent->orphan; |
| |
| /* avoid duplicate POST_RATE_CHANGE notifications */ |
| if (new_parent->new_child == core) |
| new_parent->new_child = NULL; |
| |
| hlist_add_head(&core->child_node, &new_parent->children); |
| |
| if (was_orphan != becomes_orphan) |
| clk_core_update_orphan_status(core, becomes_orphan); |
| } else { |
| hlist_add_head(&core->child_node, &clk_orphan_list); |
| if (!was_orphan) |
| clk_core_update_orphan_status(core, true); |
| } |
| |
| core->parent = new_parent; |
| } |
| |
| static struct clk_core *__clk_set_parent_before(struct clk_core *core, |
| struct clk_core *parent) |
| { |
| unsigned long flags; |
| struct clk_core *old_parent = core->parent; |
| |
| /* |
| * 1. enable parents for CLK_OPS_PARENT_ENABLE clock |
| * |
| * 2. Migrate prepare state between parents and prevent race with |
| * clk_enable(). |
| * |
| * If the clock is not prepared, then a race with |
| * clk_enable/disable() is impossible since we already have the |
| * prepare lock (future calls to clk_enable() need to be preceded by |
| * a clk_prepare()). |
| * |
| * If the clock is prepared, migrate the prepared state to the new |
| * parent and also protect against a race with clk_enable() by |
| * forcing the clock and the new parent on. This ensures that all |
| * future calls to clk_enable() are practically NOPs with respect to |
| * hardware and software states. |
| * |
| * See also: Comment for clk_set_parent() below. |
| */ |
| |
| /* enable old_parent & parent if CLK_OPS_PARENT_ENABLE is set */ |
| if (core->flags & CLK_OPS_PARENT_ENABLE) { |
| clk_core_prepare_enable(old_parent); |
| clk_core_prepare_enable(parent); |
| } |
| |
| /* migrate prepare count if > 0 */ |
| if (core->prepare_count) { |
| clk_core_prepare_enable(parent); |
| clk_core_enable_lock(core); |
| } |
| |
| /* update the clk tree topology */ |
| flags = clk_enable_lock(); |
| clk_reparent(core, parent); |
| clk_enable_unlock(flags); |
| |
| return old_parent; |
| } |
| |
| static void __clk_set_parent_after(struct clk_core *core, |
| struct clk_core *parent, |
| struct clk_core *old_parent) |
| { |
| /* |
| * Finish the migration of prepare state and undo the changes done |
| * for preventing a race with clk_enable(). |
| */ |
| if (core->prepare_count) { |
| clk_core_disable_lock(core); |
| clk_core_disable_unprepare(old_parent); |
| } |
| |
| /* re-balance ref counting if CLK_OPS_PARENT_ENABLE is set */ |
| if (core->flags & CLK_OPS_PARENT_ENABLE) { |
| clk_core_disable_unprepare(parent); |
| clk_core_disable_unprepare(old_parent); |
| } |
| } |
| |
| static int __clk_set_parent(struct clk_core *core, struct clk_core *parent, |
| u8 p_index) |
| { |
| unsigned long flags; |
| int ret = 0; |
| struct clk_core *old_parent; |
| |
| old_parent = __clk_set_parent_before(core, parent); |
| |
| trace_clk_set_parent(core, parent); |
| |
| /* change clock input source */ |
| if (parent && core->ops->set_parent) |
| ret = core->ops->set_parent(core->hw, p_index); |
| |
| trace_clk_set_parent_complete(core, parent); |
| |
| if (ret) { |
| flags = clk_enable_lock(); |
| clk_reparent(core, old_parent); |
| clk_enable_unlock(flags); |
| __clk_set_parent_after(core, old_parent, parent); |
| |
| return ret; |
| } |
| |
| __clk_set_parent_after(core, parent, old_parent); |
| |
| return 0; |
| } |
| |
| /** |
| * __clk_speculate_rates |
| * @core: first clk in the subtree |
| * @parent_rate: the "future" rate of clk's parent |
| * |
| * Walks the subtree of clks starting with clk, speculating rates as it |
| * goes and firing off PRE_RATE_CHANGE notifications as necessary. |
| * |
| * Unlike clk_recalc_rates, clk_speculate_rates exists only for sending |
| * pre-rate change notifications and returns early if no clks in the |
| * subtree have subscribed to the notifications. Note that if a clk does not |
| * implement the .recalc_rate callback then it is assumed that the clock will |
| * take on the rate of its parent. |
| */ |
| static int __clk_speculate_rates(struct clk_core *core, |
| unsigned long parent_rate) |
| { |
| struct clk_core *child; |
| unsigned long new_rate; |
| int ret = NOTIFY_DONE; |
| |
| lockdep_assert_held(&prepare_lock); |
| |
| new_rate = clk_recalc(core, parent_rate); |
| |
| /* abort rate change if a driver returns NOTIFY_BAD or NOTIFY_STOP */ |
| if (core->notifier_count) |
| ret = __clk_notify(core, PRE_RATE_CHANGE, core->rate, new_rate); |
| |
| if (ret & NOTIFY_STOP_MASK) { |
| pr_debug("%s: clk notifier callback for clock %s aborted with error %d\n", |
| __func__, core->name, ret); |
| goto out; |
| } |
| |
| hlist_for_each_entry(child, &core->children, child_node) { |
| ret = __clk_speculate_rates(child, new_rate); |
| if (ret & NOTIFY_STOP_MASK) |
| break; |
| } |
| |
| out: |
| return ret; |
| } |
| |
| static void clk_calc_subtree(struct clk_core *core, unsigned long new_rate, |
| struct clk_core *new_parent, u8 p_index) |
| { |
| struct clk_core *child; |
| |
| core->new_rate = new_rate; |
| core->new_parent = new_parent; |
| core->new_parent_index = p_index; |
| /* include clk in new parent's PRE_RATE_CHANGE notifications */ |
| core->new_child = NULL; |
| if (new_parent && new_parent != core->parent) |
| new_parent->new_child = core; |
| |
| hlist_for_each_entry(child, &core->children, child_node) { |
| child->new_rate = clk_recalc(child, new_rate); |
| clk_calc_subtree(child, child->new_rate, NULL, 0); |
| } |
| } |
| |
| /* |
| * calculate the new rates returning the topmost clock that has to be |
| * changed. |
| */ |
| static struct clk_core *clk_calc_new_rates(struct clk_core *core, |
| unsigned long rate) |
| { |
| struct clk_core *top = core; |
| struct clk_core *old_parent, *parent; |
| unsigned long best_parent_rate = 0; |
| unsigned long new_rate; |
| unsigned long min_rate; |
| unsigned long max_rate; |
| int p_index = 0; |
| long ret; |
| |
| /* sanity */ |
| if (IS_ERR_OR_NULL(core)) |
| return NULL; |
| |
| /* save parent rate, if it exists */ |
| parent = old_parent = core->parent; |
| if (parent) |
| best_parent_rate = parent->rate; |
| |
| clk_core_get_boundaries(core, &min_rate, &max_rate); |
| |
| /* find the closest rate and parent clk/rate */ |
| if (clk_core_can_round(core)) { |
| struct clk_rate_request req; |
| |
| req.rate = rate; |
| req.min_rate = min_rate; |
| req.max_rate = max_rate; |
| |
| clk_core_init_rate_req(core, &req); |
| |
| ret = clk_core_determine_round_nolock(core, &req); |
| if (ret < 0) |
| return NULL; |
| |
| best_parent_rate = req.best_parent_rate; |
| new_rate = req.rate; |
| parent = req.best_parent_hw ? req.best_parent_hw->core : NULL; |
| |
| if (new_rate < min_rate || new_rate > max_rate) |
| return NULL; |
| } else if (!parent || !(core->flags & CLK_SET_RATE_PARENT)) { |
| /* pass-through clock without adjustable parent */ |
| core->new_rate = core->rate; |
| return NULL; |
| } else { |
| /* pass-through clock with adjustable parent */ |
| top = clk_calc_new_rates(parent, rate); |
| new_rate = parent->new_rate; |
| goto out; |
| } |
| |
| /* some clocks must be gated to change parent */ |
| if (parent != old_parent && |
| (core->flags & CLK_SET_PARENT_GATE) && core->prepare_count) { |
| pr_debug("%s: %s not gated but wants to reparent\n", |
| __func__, core->name); |
| return NULL; |
| } |
| |
| /* try finding the new parent index */ |
| if (parent && core->num_parents > 1) { |
| p_index = clk_fetch_parent_index(core, parent); |
| if (p_index < 0) { |
| pr_debug("%s: clk %s can not be parent of clk %s\n", |
| __func__, parent->name, core->name); |
| return NULL; |
| } |
| } |
| |
| if ((core->flags & CLK_SET_RATE_PARENT) && parent && |
| best_parent_rate != parent->rate) |
| top = clk_calc_new_rates(parent, best_parent_rate); |
| |
| out: |
| clk_calc_subtree(core, new_rate, parent, p_index); |
| |
| return top; |
| } |
| |
| /* |
| * Notify about rate changes in a subtree. Always walk down the whole tree |
| * so that in case of an error we can walk down the whole tree again and |
| * abort the change. |
| */ |
| static struct clk_core *clk_propagate_rate_change(struct clk_core *core, |
| unsigned long event) |
| { |
| struct clk_core *child, *tmp_clk, *fail_clk = NULL; |
| int ret = NOTIFY_DONE; |
| |
| if (core->rate == core->new_rate) |
| return NULL; |
| |
| if (core->notifier_count) { |
| ret = __clk_notify(core, event, core->rate, core->new_rate); |
| if (ret & NOTIFY_STOP_MASK) |
| fail_clk = core; |
| } |
| |
| hlist_for_each_entry(child, &core->children, child_node) { |
| /* Skip children who will be reparented to another clock */ |
| if (child->new_parent && child->new_parent != core) |
| continue; |
| tmp_clk = clk_propagate_rate_change(child, event); |
| if (tmp_clk) |
| fail_clk = tmp_clk; |
| } |
| |
| /* handle the new child who might not be in core->children yet */ |
| if (core->new_child) { |
| tmp_clk = clk_propagate_rate_change(core->new_child, event); |
| if (tmp_clk) |
| fail_clk = tmp_clk; |
| } |
| |
| return fail_clk; |
| } |
| |
| /* |
| * walk down a subtree and set the new rates notifying the rate |
| * change on the way |
| */ |
| static void clk_change_rate(struct clk_core *core) |
| { |
| struct clk_core *child; |
| struct hlist_node *tmp; |
| unsigned long old_rate; |
| unsigned long best_parent_rate = 0; |
| bool skip_set_rate = false; |
| struct clk_core *old_parent; |
| struct clk_core *parent = NULL; |
| |
| old_rate = core->rate; |
| |
| if (core->new_parent) { |
| parent = core->new_parent; |
| best_parent_rate = core->new_parent->rate; |
| } else if (core->parent) { |
| parent = core->parent; |
| best_parent_rate = core->parent->rate; |
| } |
| |
| if (clk_pm_runtime_get(core)) |
| return; |
| |
| if (core->flags & CLK_SET_RATE_UNGATE) { |
| unsigned long flags; |
| |
| clk_core_prepare(core); |
| flags = clk_enable_lock(); |
| clk_core_enable(core); |
| clk_enable_unlock(flags); |
| } |
| |
| if (core->new_parent && core->new_parent != core->parent) { |
| old_parent = __clk_set_parent_before(core, core->new_parent); |
| trace_clk_set_parent(core, core->new_parent); |
| |
| if (core->ops->set_rate_and_parent) { |
| skip_set_rate = true; |
| core->ops->set_rate_and_parent(core->hw, core->new_rate, |
| best_parent_rate, |
| core->new_parent_index); |
| } else if (core->ops->set_parent) { |
| core->ops->set_parent(core->hw, core->new_parent_index); |
| } |
| |
| trace_clk_set_parent_complete(core, core->new_parent); |
| __clk_set_parent_after(core, core->new_parent, old_parent); |
| } |
| |
| if (core->flags & CLK_OPS_PARENT_ENABLE) |
| clk_core_prepare_enable(parent); |
| |
| trace_clk_set_rate(core, core->new_rate); |
| |
| if (!skip_set_rate && core->ops->set_rate) |
| core->ops->set_rate(core->hw, core->new_rate, best_parent_rate); |
| |
| trace_clk_set_rate_complete(core, core->new_rate); |
| |
| core->rate = clk_recalc(core, best_parent_rate); |
| |
| if (core->flags & CLK_SET_RATE_UNGATE) { |
| unsigned long flags; |
| |
| flags = clk_enable_lock(); |
| clk_core_disable(core); |
| clk_enable_unlock(flags); |
| clk_core_unprepare(core); |
| } |
| |
| if (core->flags & CLK_OPS_PARENT_ENABLE) |
| clk_core_disable_unprepare(parent); |
| |
| if (core->notifier_count && old_rate != core->rate) |
| __clk_notify(core, POST_RATE_CHANGE, old_rate, core->rate); |
| |
| if (core->flags & CLK_RECALC_NEW_RATES) |
| (void)clk_calc_new_rates(core, core->new_rate); |
| |
| /* |
| * Use safe iteration, as change_rate can actually swap parents |
| * for certain clock types. |
| */ |
| hlist_for_each_entry_safe(child, tmp, &core->children, child_node) { |
| /* Skip children who will be reparented to another clock */ |
| if (child->new_parent && child->new_parent != core) |
| continue; |
| clk_change_rate(child); |
| } |
| |
| /* handle the new child who might not be in core->children yet */ |
| if (core->new_child) |
| clk_change_rate(core->new_child); |
| |
| clk_pm_runtime_put(core); |
| } |
| |
| static unsigned long clk_core_req_round_rate_nolock(struct clk_core *core, |
| unsigned long req_rate) |
| { |
| int ret, cnt; |
| struct clk_rate_request req; |
| |
| lockdep_assert_held(&prepare_lock); |
| |
| if (!core) |
| return 0; |
| |
| /* simulate what the rate would be if it could be freely set */ |
| cnt = clk_core_rate_nuke_protect(core); |
| if (cnt < 0) |
| return cnt; |
| |
| clk_core_get_boundaries(core, &req.min_rate, &req.max_rate); |
| req.rate = req_rate; |
| |
| ret = clk_core_round_rate_nolock(core, &req); |
| |
| /* restore the protection */ |
| clk_core_rate_restore_protect(core, cnt); |
| |
| return ret ? 0 : req.rate; |
| } |
| |
| static int clk_core_set_rate_nolock(struct clk_core *core, |
| unsigned long req_rate) |
| { |
| struct clk_core *top, *fail_clk; |
| unsigned long rate; |
| int ret = 0; |
| |
| if (!core) |
| return 0; |
| |
| rate = clk_core_req_round_rate_nolock(core, req_rate); |
| |
| /* bail early if nothing to do */ |
| if (rate == clk_core_get_rate_nolock(core)) |
| return 0; |
| |
| /* fail on a direct rate set of a protected provider */ |
| if (clk_core_rate_is_protected(core)) |
| return -EBUSY; |
| |
| /* calculate new rates and get the topmost changed clock */ |
| top = clk_calc_new_rates(core, req_rate); |
| if (!top) |
| return -EINVAL; |
| |
| ret = clk_pm_runtime_get(core); |
| if (ret) |
| return ret; |
| |
| /* notify that we are about to change rates */ |
| fail_clk = clk_propagate_rate_change(top, PRE_RATE_CHANGE); |
| if (fail_clk) { |
| pr_debug("%s: failed to set %s rate\n", __func__, |
| fail_clk->name); |
| clk_propagate_rate_change(top, ABORT_RATE_CHANGE); |
| ret = -EBUSY; |
| goto err; |
| } |
| |
| /* change the rates */ |
| clk_change_rate(top); |
| |
| core->req_rate = req_rate; |
| err: |
| clk_pm_runtime_put(core); |
| |
| return ret; |
| } |
| |
| /** |
| * clk_set_rate - specify a new rate for clk |
| * @clk: the clk whose rate is being changed |
| * @rate: the new rate for clk |
| * |
| * In the simplest case clk_set_rate will only adjust the rate of clk. |
| * |
| * Setting the CLK_SET_RATE_PARENT flag allows the rate change operation to |
| * propagate up to clk's parent; whether or not this happens depends on the |
| * outcome of clk's .round_rate implementation. If *parent_rate is unchanged |
| * after calling .round_rate then upstream parent propagation is ignored. If |
| * *parent_rate comes back with a new rate for clk's parent then we propagate |
| * up to clk's parent and set its rate. Upward propagation will continue |
| * until either a clk does not support the CLK_SET_RATE_PARENT flag or |
| * .round_rate stops requesting changes to clk's parent_rate. |
| * |
| * Rate changes are accomplished via tree traversal that also recalculates the |
| * rates for the clocks and fires off POST_RATE_CHANGE notifiers. |
| * |
| * Returns 0 on success, -EERROR otherwise. |
| */ |
| int clk_set_rate(struct clk *clk, unsigned long rate) |
| { |
| int ret; |
| |
| if (!clk) |
| return 0; |
| |
| /* prevent racing with updates to the clock topology */ |
| clk_prepare_lock(); |
| |
| if (clk->exclusive_count) |
| clk_core_rate_unprotect(clk->core); |
| |
| ret = clk_core_set_rate_nolock(clk->core, rate); |
| |
| if (clk->exclusive_count) |
| clk_core_rate_protect(clk->core); |
| |
| clk_prepare_unlock(); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(clk_set_rate); |
| |
| /** |
| * clk_set_rate_exclusive - specify a new rate and get exclusive control |
| * @clk: the clk whose rate is being changed |
| * @rate: the new rate for clk |
| * |
| * This is a combination of clk_set_rate() and clk_rate_exclusive_get() |
| * within a critical section |
| * |
| * This can be used initially to ensure that at least 1 consumer is |
| * satisfied when several consumers are competing for exclusivity over the |
| * same clock provider. |
| * |
| * The exclusivity is not applied if setting the rate failed. |
| * |
| * Calls to clk_rate_exclusive_get() should be balanced with calls to |
| * clk_rate_exclusive_put(). |
| * |
| * Returns 0 on success, -EERROR otherwise. |
| */ |
| int clk_set_rate_exclusive(struct clk *clk, unsigned long rate) |
| { |
| int ret; |
| |
| if (!clk) |
| return 0; |
| |
| /* prevent racing with updates to the clock topology */ |
| clk_prepare_lock(); |
| |
| /* |
| * The temporary protection removal is not here, on purpose |
| * This function is meant to be used instead of clk_rate_protect, |
| * so before the consumer code path protect the clock provider |
| */ |
| |
| ret = clk_core_set_rate_nolock(clk->core, rate); |
| if (!ret) { |
| clk_core_rate_protect(clk->core); |
| clk->exclusive_count++; |
| } |
| |
| clk_prepare_unlock(); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(clk_set_rate_exclusive); |
| |
| /** |
| * clk_set_rate_range - set a rate range for a clock source |
| * @clk: clock source |
| * @min: desired minimum clock rate in Hz, inclusive |
| * @max: desired maximum clock rate in Hz, inclusive |
| * |
| * Returns success (0) or negative errno. |
| */ |
| int clk_set_rate_range(struct clk *clk, unsigned long min, unsigned long max) |
| { |
| int ret = 0; |
| unsigned long old_min, old_max, rate; |
| |
| if (!clk) |
| return 0; |
| |
| if (min > max) { |
| pr_err("%s: clk %s dev %s con %s: invalid range [%lu, %lu]\n", |
| __func__, clk->core->name, clk->dev_id, clk->con_id, |
| min, max); |
| return -EINVAL; |
| } |
| |
| clk_prepare_lock(); |
| |
| if (clk->exclusive_count) |
| clk_core_rate_unprotect(clk->core); |
| |
| /* Save the current values in case we need to rollback the change */ |
| old_min = clk->min_rate; |
| old_max = clk->max_rate; |
| clk->min_rate = min; |
| clk->max_rate = max; |
| |
| rate = clk_core_get_rate_nolock(clk->core); |
| if (rate < min || rate > max) { |
| /* |
| * FIXME: |
| * We are in bit of trouble here, current rate is outside the |
| * the requested range. We are going try to request appropriate |
| * range boundary but there is a catch. It may fail for the |
| * usual reason (clock broken, clock protected, etc) but also |
| * because: |
| * - round_rate() was not favorable and fell on the wrong |
| * side of the boundary |
| * - the determine_rate() callback does not really check for |
| * this corner case when determining the rate |
| */ |
| |
| if (rate < min) |
| rate = min; |
| else |
| rate = max; |
| |
| ret = clk_core_set_rate_nolock(clk->core, rate); |
| if (ret) { |
| /* rollback the changes */ |
| clk->min_rate = old_min; |
| clk->max_rate = old_max; |
| } |
| } |
| |
| if (clk->exclusive_count) |
| clk_core_rate_protect(clk->core); |
| |
| clk_prepare_unlock(); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(clk_set_rate_range); |
| |
| /** |
| * clk_set_min_rate - set a minimum clock rate for a clock source |
| * @clk: clock source |
| * @rate: desired minimum clock rate in Hz, inclusive |
| * |
| * Returns success (0) or negative errno. |
| */ |
| int clk_set_min_rate(struct clk *clk, unsigned long rate) |
| { |
| if (!clk) |
| return 0; |
| |
| return clk_set_rate_range(clk, rate, clk->max_rate); |
| } |
| EXPORT_SYMBOL_GPL(clk_set_min_rate); |
| |
| /** |
| * clk_set_max_rate - set a maximum clock rate for a clock source |
| * @clk: clock source |
| * @rate: desired maximum clock rate in Hz, inclusive |
| * |
| * Returns success (0) or negative errno. |
| */ |
| int clk_set_max_rate(struct clk *clk, unsigned long rate) |
| { |
| if (!clk) |
| return 0; |
| |
| return clk_set_rate_range(clk, clk->min_rate, rate); |
| } |
| EXPORT_SYMBOL_GPL(clk_set_max_rate); |
| |
| /** |
| * clk_get_parent - return the parent of a clk |
| * @clk: the clk whose parent gets returned |
| * |
| * Simply returns clk->parent. Returns NULL if clk is NULL. |
| */ |
| struct clk *clk_get_parent(struct clk *clk) |
| { |
| struct clk *parent; |
| |
| if (!clk) |
| return NULL; |
| |
| clk_prepare_lock(); |
| /* TODO: Create a per-user clk and change callers to call clk_put */ |
| parent = !clk->core->parent ? NULL : clk->core->parent->hw->clk; |
| clk_prepare_unlock(); |
| |
| return parent; |
| } |
| EXPORT_SYMBOL_GPL(clk_get_parent); |
| |
| static struct clk_core *__clk_init_parent(struct clk_core *core) |
| { |
| u8 index = 0; |
| |
| if (core->num_parents > 1 && core->ops->get_parent) |
| index = core->ops->get_parent(core->hw); |
| |
| return clk_core_get_parent_by_index(core, index); |
| } |
| |
| static void clk_core_reparent(struct clk_core *core, |
| struct clk_core *new_parent) |
| { |
| clk_reparent(core, new_parent); |
| __clk_recalc_accuracies(core); |
| __clk_recalc_rates(core, POST_RATE_CHANGE); |
| } |
| |
| void clk_hw_reparent(struct clk_hw *hw, struct clk_hw *new_parent) |
| { |
| if (!hw) |
| return; |
| |
| clk_core_reparent(hw->core, !new_parent ? NULL : new_parent->core); |
| } |
| |
| /** |
| * clk_has_parent - check if a clock is a possible parent for another |
| * @clk: clock source |
| * @parent: parent clock source |
| * |
| * This function can be used in drivers that need to check that a clock can be |
| * the parent of another without actually changing the parent. |
| * |
| * Returns true if @parent is a possible parent for @clk, false otherwise. |
| */ |
| bool clk_has_parent(struct clk *clk, struct clk *parent) |
| { |
| struct clk_core *core, *parent_core; |
| int i; |
| |
| /* NULL clocks should be nops, so return success if either is NULL. */ |
| if (!clk || !parent) |
| return true; |
| |
| core = clk->core; |
| parent_core = parent->core; |
| |
| /* Optimize for the case where the parent is already the parent. */ |
| if (core->parent == parent_core) |
| return true; |
| |
| for (i = 0; i < core->num_parents; i++) |
| if (!strcmp(core->parents[i].name, parent_core->name)) |
| return true; |
| |
| return false; |
| } |
| EXPORT_SYMBOL_GPL(clk_has_parent); |
| |
| static int clk_core_set_parent_nolock(struct clk_core *core, |
| struct clk_core *parent) |
| { |
| int ret = 0; |
| int p_index = 0; |
| unsigned long p_rate = 0; |
| |
| lockdep_assert_held(&prepare_lock); |
| |
| if (!core) |
| return 0; |
| |
| if (core->parent == parent) |
| return 0; |
| |
| /* verify ops for multi-parent clks */ |
| if (core->num_parents > 1 && !core->ops->set_parent) |
| return -EPERM; |
| |
| /* check that we are allowed to re-parent if the clock is in use */ |
| if ((core->flags & CLK_SET_PARENT_GATE) && core->prepare_count) |
| return -EBUSY; |
| |
| if (clk_core_rate_is_protected(core)) |
| return -EBUSY; |
| |
| /* try finding the new parent index */ |
| if (parent) { |
| p_index = clk_fetch_parent_index(core, parent); |
| if (p_index < 0) { |
| pr_debug("%s: clk %s can not be parent of clk %s\n", |
| __func__, parent->name, core->name); |
| return p_index; |
| } |
| p_rate = parent->rate; |
| } |
| |
| ret = clk_pm_runtime_get(core); |
| if (ret) |
| return ret; |
| |
| /* propagate PRE_RATE_CHANGE notifications */ |
| ret = __clk_speculate_rates(core, p_rate); |
| |
| /* abort if a driver objects */ |
| if (ret & NOTIFY_STOP_MASK) |
| goto runtime_put; |
| |
| /* do the re-parent */ |
| ret = __clk_set_parent(core, parent, p_index); |
| |
| /* propagate rate an accuracy recalculation accordingly */ |
| if (ret) { |
| __clk_recalc_rates(core, ABORT_RATE_CHANGE); |
| } else { |
| __clk_recalc_rates(core, POST_RATE_CHANGE); |
| __clk_recalc_accuracies(core); |
| } |
| |
| runtime_put: |
| clk_pm_runtime_put(core); |
| |
| return ret; |
| } |
| |
| int clk_hw_set_parent(struct clk_hw *hw, struct clk_hw *parent) |
| { |
| return clk_core_set_parent_nolock(hw->core, parent->core); |
| } |
| EXPORT_SYMBOL_GPL(clk_hw_set_parent); |
| |
| /** |
| * clk_set_parent - switch the parent of a mux clk |
| * @clk: the mux clk whose input we are switching |
| * @parent: the new input to clk |
| * |
| * Re-parent clk to use parent as its new input source. If clk is in |
| * prepared state, the clk will get enabled for the duration of this call. If |
| * that's not acceptable for a specific clk (Eg: the consumer can't handle |
| * that, the reparenting is glitchy in hardware, etc), use the |
| * CLK_SET_PARENT_GATE flag to allow reparenting only when clk is unprepared. |
| * |
| * After successfully changing clk's parent clk_set_parent will update the |
| * clk topology, sysfs topology and propagate rate recalculation via |
| * __clk_recalc_rates. |
| * |
| * Returns 0 on success, -EERROR otherwise. |
| */ |
| int clk_set_parent(struct clk *clk, struct clk *parent) |
| { |
| int ret; |
| |
| if (!clk) |
| return 0; |
| |
| clk_prepare_lock(); |
| |
| if (clk->exclusive_count) |
| clk_core_rate_unprotect(clk->core); |
| |
| ret = clk_core_set_parent_nolock(clk->core, |
| parent ? parent->core : NULL); |
| |
| if (clk->exclusive_count) |
| clk_core_rate_protect(clk->core); |
| |
| clk_prepare_unlock(); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(clk_set_parent); |
| |
| static int clk_core_set_phase_nolock(struct clk_core *core, int degrees) |
| { |
| int ret = -EINVAL; |
| |
| lockdep_assert_held(&prepare_lock); |
| |
| if (!core) |
| return 0; |
| |
| if (clk_core_rate_is_protected(core)) |
| return -EBUSY; |
| |
| trace_clk_set_phase(core, degrees); |
| |
| if (core->ops->set_phase) { |
| ret = core->ops->set_phase(core->hw, degrees); |
| if (!ret) |
| core->phase = degrees; |
| } |
| |
| trace_clk_set_phase_complete(core, degrees); |
| |
| return ret; |
| } |
| |
| /** |
| * clk_set_phase - adjust the phase shift of a clock signal |
| * @clk: clock signal source |
| * @degrees: number of degrees the signal is shifted |
| * |
| * Shifts the phase of a clock signal by the specified |
| * degrees. Returns 0 on success, -EERROR otherwise. |
| * |
| * This function makes no distinction about the input or reference |
| * signal that we adjust the clock signal phase against. For example |
| * phase locked-loop clock signal generators we may shift phase with |
| * respect to feedback clock signal input, but for other cases the |
| * clock phase may be shifted with respect to some other, unspecified |
| * signal. |
| * |
| * Additionally the concept of phase shift does not propagate through |
| * the clock tree hierarchy, which sets it apart from clock rates and |
| * clock accuracy. A parent clock phase attribute does not have an |
| * impact on the phase attribute of a child clock. |
| */ |
| int clk_set_phase(struct clk *clk, int degrees) |
| { |
| int ret; |
| |
| if (!clk) |
| return 0; |
| |
| /* sanity check degrees */ |
| degrees %= 360; |
| if (degrees < 0) |
| degrees += 360; |
| |
| clk_prepare_lock(); |
| |
| if (clk->exclusive_count) |
| clk_core_rate_unprotect(clk->core); |
| |
| ret = clk_core_set_phase_nolock(clk->core, degrees); |
| |
| if (clk->exclusive_count) |
| clk_core_rate_protect(clk->core); |
| |
| clk_prepare_unlock(); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(clk_set_phase); |
| |
| static int clk_core_get_phase(struct clk_core *core) |
| { |
| int ret; |
| |
| lockdep_assert_held(&prepare_lock); |
| if (!core->ops->get_phase) |
| return 0; |
| |
| /* Always try to update cached phase if possible */ |
| ret = core->ops->get_phase(core->hw); |
| if (ret >= 0) |
| core->phase = ret; |
| |
| return ret; |
| } |
| |
| /** |
| * clk_get_phase - return the phase shift of a clock signal |
| * @clk: clock signal source |
| * |
| * Returns the phase shift of a clock node in degrees, otherwise returns |
| * -EERROR. |
| */ |
| int clk_get_phase(struct clk *clk) |
| { |
| int ret; |
| |
| if (!clk) |
| return 0; |
| |
| clk_prepare_lock(); |
| ret = clk_core_get_phase(clk->core); |
| clk_prepare_unlock(); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(clk_get_phase); |
| |
| static void clk_core_reset_duty_cycle_nolock(struct clk_core *core) |
| { |
| /* Assume a default value of 50% */ |
| core->duty.num = 1; |
| core->duty.den = 2; |
| } |
| |
| static int clk_core_update_duty_cycle_parent_nolock(struct clk_core *core); |
| |
| static int clk_core_update_duty_cycle_nolock(struct clk_core *core) |
| { |
| struct clk_duty *duty = &core->duty; |
| int ret = 0; |
| |
| if (!core->ops->get_duty_cycle) |
| return clk_core_update_duty_cycle_parent_nolock(core); |
| |
| ret = core->ops->get_duty_cycle(core->hw, duty); |
| if (ret) |
| goto reset; |
| |
| /* Don't trust the clock provider too much */ |
| if (duty->den == 0 || duty->num > duty->den) { |
| ret = -EINVAL; |
| goto reset; |
| } |
| |
| return 0; |
| |
| reset: |
| clk_core_reset_duty_cycle_nolock(core); |
| return ret; |
| } |
| |
| static int clk_core_update_duty_cycle_parent_nolock(struct clk_core *core) |
| { |
| int ret = 0; |
| |
| if (core->parent && |
| core->flags & CLK_DUTY_CYCLE_PARENT) { |
| ret = clk_core_update_duty_cycle_nolock(core->parent); |
| memcpy(&core->duty, &core->parent->duty, sizeof(core->duty)); |
| } else { |
| clk_core_reset_duty_cycle_nolock(core); |
| } |
| |
| return ret; |
| } |
| |
| static int clk_core_set_duty_cycle_parent_nolock(struct clk_core *core, |
| struct clk_duty *duty); |
| |
| static int clk_core_set_duty_cycle_nolock(struct clk_core *core, |
| struct clk_duty *duty) |
| { |
| int ret; |
| |
| lockdep_assert_held(&prepare_lock); |
| |
| if (clk_core_rate_is_protected(core)) |
| return -EBUSY; |
| |
| trace_clk_set_duty_cycle(core, duty); |
| |
| if (!core->ops->set_duty_cycle) |
| return clk_core_set_duty_cycle_parent_nolock(core, duty); |
| |
| ret = core->ops->set_duty_cycle(core->hw, duty); |
| if (!ret) |
| memcpy(&core->duty, duty, sizeof(*duty)); |
| |
| trace_clk_set_duty_cycle_complete(core, duty); |
| |
| return ret; |
| } |
| |
| static int clk_core_set_duty_cycle_parent_nolock(struct clk_core *core, |
| struct clk_duty *duty) |
| { |
| int ret = 0; |
| |
| if (core->parent && |
| core->flags & (CLK_DUTY_CYCLE_PARENT | CLK_SET_RATE_PARENT)) { |
| ret = clk_core_set_duty_cycle_nolock(core->parent, duty); |
| memcpy(&core->duty, &core->parent->duty, sizeof(core->duty)); |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * clk_set_duty_cycle - adjust the duty cycle ratio of a clock signal |
| * @clk: clock signal source |
| * @num: numerator of the duty cycle ratio to be applied |
| * @den: denominator of the duty cycle ratio to be applied |
| * |
| * Apply the duty cycle ratio if the ratio is valid and the clock can |
| * perform this operation |
| * |
| * Returns (0) on success, a negative errno otherwise. |
| */ |
| int clk_set_duty_cycle(struct clk *clk, unsigned int num, unsigned int den) |
| { |
| int ret; |
| struct clk_duty duty; |
| |
| if (!clk) |
| return 0; |
| |
| /* sanity check the ratio */ |
| if (den == 0 || num > den) |
| return -EINVAL; |
| |
| duty.num = num; |
| duty.den = den; |
| |
| clk_prepare_lock(); |
| |
| if (clk->exclusive_count) |
| clk_core_rate_unprotect(clk->core); |
| |
| ret = clk_core_set_duty_cycle_nolock(clk->core, &duty); |
| |
| if (clk->exclusive_count) |
| clk_core_rate_protect(clk->core); |
| |
| clk_prepare_unlock(); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(clk_set_duty_cycle); |
| |
| static int clk_core_get_scaled_duty_cycle(struct clk_core *core, |
| unsigned int scale) |
| { |
| struct clk_duty *duty = &core->duty; |
| int ret; |
| |
| clk_prepare_lock(); |
| |
| ret = clk_core_update_duty_cycle_nolock(core); |
| if (!ret) |
| ret = mult_frac(scale, duty->num, duty->den); |
| |
| clk_prepare_unlock(); |
| |
| return ret; |
| } |
| |
| /** |
| * clk_get_scaled_duty_cycle - return the duty cycle ratio of a clock signal |
| * @clk: clock signal source |
| * @scale: scaling factor to be applied to represent the ratio as an integer |
| * |
| * Returns the duty cycle ratio of a clock node multiplied by the provided |
| * scaling factor, or negative errno on error. |
| */ |
| int clk_get_scaled_duty_cycle(struct clk *clk, unsigned int scale) |
| { |
| if (!clk) |
| return 0; |
| |
| return clk_core_get_scaled_duty_cycle(clk->core, scale); |
| } |
| EXPORT_SYMBOL_GPL(clk_get_scaled_duty_cycle); |
| |
| /** |
| * clk_is_match - check if two clk's point to the same hardware clock |
| * @p: clk compared against q |
| * @q: clk compared against p |
| * |
| * Returns true if the two struct clk pointers both point to the same hardware |
| * clock node. Put differently, returns true if struct clk *p and struct clk *q |
| * share the same struct clk_core object. |
| * |
| * Returns false otherwise. Note that two NULL clks are treated as matching. |
| */ |
| bool clk_is_match(const struct clk *p, const struct clk *q) |
| { |
| /* trivial case: identical struct clk's or both NULL */ |
| if (p == q) |
| return true; |
| |
| /* true if clk->core pointers match. Avoid dereferencing garbage */ |
| if (!IS_ERR_OR_NULL(p) && !IS_ERR_OR_NULL(q)) |
| if (p->core == q->core) |
| return true; |
| |
| return false; |
| } |
| EXPORT_SYMBOL_GPL(clk_is_match); |
| |
| /*** debugfs support ***/ |
| |
| #ifdef CONFIG_DEBUG_FS |
| #include <linux/debugfs.h> |
| |
| static struct dentry *rootdir; |
| static int inited = 0; |
| static DEFINE_MUTEX(clk_debug_lock); |
| static HLIST_HEAD(clk_debug_list); |
| |
| static struct hlist_head *orphan_list[] = { |
| &clk_orphan_list, |
| NULL, |
| }; |
| |
| static void clk_summary_show_one(struct seq_file *s, struct clk_core *c, |
| int level) |
| { |
| int phase; |
| |
| seq_printf(s, "%*s%-*s %7d %8d %8d %11lu %10lu ", |
| level * 3 + 1, "", |
| 30 - level * 3, c->name, |
| c->enable_count, c->prepare_count, c->protect_count, |
| clk_core_get_rate_recalc(c), |
| clk_core_get_accuracy_recalc(c)); |
| |
| phase = clk_core_get_phase(c); |
| if (phase >= 0) |
| seq_printf(s, "%5d", phase); |
| else |
| seq_puts(s, "-----"); |
| |
| seq_printf(s, " %6d\n", clk_core_get_scaled_duty_cycle(c, 100000)); |
| } |
| |
| static void clk_summary_show_subtree(struct seq_file *s, struct clk_core *c, |
| int level) |
| { |
| struct clk_core *child; |
| |
| clk_summary_show_one(s, c, level); |
| |
| hlist_for_each_entry(child, &c->children, child_node) |
| clk_summary_show_subtree(s, child, level + 1); |
| } |
| |
| static int clk_summary_show(struct seq_file *s, void *data) |
| { |
| struct clk_core *c; |
| struct hlist_head **lists = (struct hlist_head **)s->private; |
| |
| seq_puts(s, " enable prepare protect duty\n"); |
| seq_puts(s, " clock count count count rate accuracy phase cycle\n"); |
| seq_puts(s, "---------------------------------------------------------------------------------------------\n"); |
| |
| clk_prepare_lock(); |
| |
| for (; *lists; lists++) |
| hlist_for_each_entry(c, *lists, child_node) |
| clk_summary_show_subtree(s, c, 0); |
| |
| clk_prepare_unlock(); |
| |
| return 0; |
| } |
| DEFINE_SHOW_ATTRIBUTE(clk_summary); |
| |
| static void clk_dump_one(struct seq_file *s, struct clk_core *c, int level) |
| { |
| int phase; |
| unsigned long min_rate, max_rate; |
| |
| clk_core_get_boundaries(c, &min_rate, &max_rate); |
| |
| /* This should be JSON format, i.e. elements separated with a comma */ |
| seq_printf(s, "\"%s\": { ", c->name); |
| seq_printf(s, "\"enable_count\": %d,", c->enable_count); |
| seq_printf(s, "\"prepare_count\": %d,", c->prepare_count); |
| seq_printf(s, "\"protect_count\": %d,", c->protect_count); |
| seq_printf(s, "\"rate\": %lu,", clk_core_get_rate_recalc(c)); |
| seq_printf(s, "\"min_rate\": %lu,", min_rate); |
| seq_printf(s, "\"max_rate\": %lu,", max_rate); |
| seq_printf(s, "\"accuracy\": %lu,", clk_core_get_accuracy_recalc(c)); |
| phase = clk_core_get_phase(c); |
| if (phase >= 0) |
| seq_printf(s, "\"phase\": %d,", phase); |
| seq_printf(s, "\"duty_cycle\": %u", |
| clk_core_get_scaled_duty_cycle(c, 100000)); |
| } |
| |
| static void clk_dump_subtree(struct seq_file *s, struct clk_core *c, int level) |
| { |
| struct clk_core *child; |
| |
| clk_dump_one(s, c, level); |
| |
| hlist_for_each_entry(child, &c->children, child_node) { |
| seq_putc(s, ','); |
| clk_dump_subtree(s, child, level + 1); |
| } |
| |
| seq_putc(s, '}'); |
| } |
| |
| static int clk_dump_show(struct seq_file *s, void *data) |
| { |
| struct clk_core *c; |
| bool first_node = true; |
| struct hlist_head **lists = (struct hlist_head **)s->private; |
| |
| seq_putc(s, '{'); |
| clk_prepare_lock(); |
| |
| for (; *lists; lists++) { |
| hlist_for_each_entry(c, *lists, child_node) { |
| if (!first_node) |
| seq_putc(s, ','); |
| first_node = false; |
| clk_dump_subtree(s, c, 0); |
| } |
| } |
| |
| clk_prepare_unlock(); |
| |
| seq_puts(s, "}\n"); |
| return 0; |
| } |
| DEFINE_SHOW_ATTRIBUTE(clk_dump); |
| |
| #undef CLOCK_ALLOW_WRITE_DEBUGFS |
| #ifdef CLOCK_ALLOW_WRITE_DEBUGFS |
| /* |
| * This can be dangerous, therefore don't provide any real compile time |
| * configuration option for this feature. |
| * People who want to use this will need to modify the source code directly. |
| */ |
| static int clk_rate_set(void *data, u64 val) |
| { |
| struct clk_core *core = data; |
| int ret; |
| |
| clk_prepare_lock(); |
| ret = clk_core_set_rate_nolock(core, val); |
| clk_prepare_unlock(); |
| |
| return ret; |
| } |
| |
| #define clk_rate_mode 0644 |
| #else |
| #define clk_rate_set NULL |
| #define clk_rate_mode 0444 |
| #endif |
| |
| static int clk_rate_get(void *data, u64 *val) |
| { |
| struct clk_core *core = data; |
| |
| *val = core->rate; |
| return 0; |
| } |
| |
| DEFINE_DEBUGFS_ATTRIBUTE(clk_rate_fops, clk_rate_get, clk_rate_set, "%llu\n"); |
| |
| static const struct { |
| unsigned long flag; |
| const char *name; |
| } clk_flags[] = { |
| #define ENTRY(f) { f, #f } |
| ENTRY(CLK_SET_RATE_GATE), |
| ENTRY(CLK_SET_PARENT_GATE), |
| ENTRY(CLK_SET_RATE_PARENT), |
| ENTRY(CLK_IGNORE_UNUSED), |
| ENTRY(CLK_GET_RATE_NOCACHE), |
| ENTRY(CLK_SET_RATE_NO_REPARENT), |
| ENTRY(CLK_GET_ACCURACY_NOCACHE), |
| ENTRY(CLK_RECALC_NEW_RATES), |
| ENTRY(CLK_SET_RATE_UNGATE), |
| ENTRY(CLK_IS_CRITICAL), |
| ENTRY(CLK_OPS_PARENT_ENABLE), |
| ENTRY(CLK_DUTY_CYCLE_PARENT), |
| #undef ENTRY |
| }; |
| |
| static int clk_flags_show(struct seq_file *s, void *data) |
| { |
| struct clk_core *core = s->private; |
| unsigned long flags = core->flags; |
| unsigned int i; |
| |
| for (i = 0; flags && i < ARRAY_SIZE(clk_flags); i++) { |
| if (flags & clk_flags[i].flag) { |
| seq_printf(s, "%s\n", clk_flags[i].name); |
| flags &= ~clk_flags[i].flag; |
| } |
| } |
| if (flags) { |
| /* Unknown flags */ |
| seq_printf(s, "0x%lx\n", flags); |
| } |
| |
| return 0; |
| } |
| DEFINE_SHOW_ATTRIBUTE(clk_flags); |
| |
| static void possible_parent_show(struct seq_file *s, struct clk_core *core, |
| unsigned int i, char terminator) |
| { |
| struct clk_core *parent; |
| |
| /* |
| * Go through the following options to fetch a parent's name. |
| * |
| * 1. Fetch the registered parent clock and use its name |
| * 2. Use the global (fallback) name if specified |
| * 3. Use the local fw_name if provided |
| * 4. Fetch parent clock's clock-output-name if DT index was set |
| * |
| * This may still fail in some cases, such as when the parent is |
| * specified directly via a struct clk_hw pointer, but it isn't |
| * registered (yet). |
| */ |
| parent = clk_core_get_parent_by_index(core, i); |
| if (parent) |
| seq_puts(s, parent->name); |
| else if (core->parents[i].name) |
| seq_puts(s, core->parents[i].name); |
| else if (core->parents[i].fw_name) |
| seq_printf(s, "<%s>(fw)", core->parents[i].fw_name); |
| else if (core->parents[i].index >= 0) |
| seq_puts(s, |
| of_clk_get_parent_name(core->of_node, |
| core->parents[i].index)); |
| else |
| seq_puts(s, "(missing)"); |
| |
| seq_putc(s, terminator); |
| } |
| |
| static int possible_parents_show(struct seq_file *s, void *data) |
| { |
| struct clk_core *core = s->private; |
| int i; |
| |
| for (i = 0; i < core->num_parents - 1; i++) |
| possible_parent_show(s, core, i, ' '); |
| |
| possible_parent_show(s, core, i, '\n'); |
| |
| return 0; |
| } |
| DEFINE_SHOW_ATTRIBUTE(possible_parents); |
| |
| static int current_parent_show(struct seq_file *s, void *data) |
| { |
| struct clk_core *core = s->private; |
| |
| if (core->parent) |
| seq_printf(s, "%s\n", core->parent->name); |
| |
| return 0; |
| } |
| DEFINE_SHOW_ATTRIBUTE(current_parent); |
| |
| static int clk_duty_cycle_show(struct seq_file *s, void *data) |
| { |
| struct clk_core *core = s->private; |
| struct clk_duty *duty = &core->duty; |
| |
| seq_printf(s, "%u/%u\n", duty->num, duty->den); |
| |
| return 0; |
| } |
| DEFINE_SHOW_ATTRIBUTE(clk_duty_cycle); |
| |
| static int clk_min_rate_show(struct seq_file *s, void *data) |
| { |
| struct clk_core *core = s->private; |
| unsigned long min_rate, max_rate; |
| |
| clk_prepare_lock(); |
| clk_core_get_boundaries(core, &min_rate, &max_rate); |
| clk_prepare_unlock(); |
| seq_printf(s, "%lu\n", min_rate); |
| |
| return 0; |
| } |
| DEFINE_SHOW_ATTRIBUTE(clk_min_rate); |
| |
| static int clk_max_rate_show(struct seq_file *s, void *data) |
| { |
| struct clk_core *core = s->private; |
| unsigned long min_rate, max_rate; |
| |
| clk_prepare_lock(); |
| clk_core_get_boundaries(core, &min_rate, &max_rate); |
| clk_prepare_unlock(); |
| seq_printf(s, "%lu\n", max_rate); |
| |
| return 0; |
| } |
| DEFINE_SHOW_ATTRIBUTE(clk_max_rate); |
| |
| static void clk_debug_create_one(struct clk_core *core, struct dentry *pdentry) |
| { |
| struct dentry *root; |
| |
| if (!core || !pdentry) |
| return; |
| |
| root = debugfs_create_dir(core->name, pdentry); |
| core->dentry = root; |
| |
| debugfs_create_file("clk_rate", clk_rate_mode, root, core, |
| &clk_rate_fops); |
| debugfs_create_file("clk_min_rate", 0444, root, core, &clk_min_rate_fops); |
| debugfs_create_file("clk_max_rate", 0444, root, core, &clk_max_rate_fops); |
| debugfs_create_ulong("clk_accuracy", 0444, root, &core->accuracy); |
| debugfs_create_u32("clk_phase", 0444, root, &core->phase); |
| debugfs_create_file("clk_flags", 0444, root, core, &clk_flags_fops); |
| debugfs_create_u32("clk_prepare_count", 0444, root, &core->prepare_count); |
| debugfs_create_u32("clk_enable_count", 0444, root, &core->enable_count); |
| debugfs_create_u32("clk_protect_count", 0444, root, &core->protect_count); |
| debugfs_create_u32("clk_notifier_count", 0444, root, &core->notifier_count); |
| debugfs_create_file("clk_duty_cycle", 0444, root, core, |
| &clk_duty_cycle_fops); |
| |
| if (core->num_parents > 0) |
| debugfs_create_file("clk_parent", 0444, root, core, |
| ¤t_parent_fops); |
| |
| if (core->num_parents > 1) |
| debugfs_create_file("clk_possible_parents", 0444, root, core, |
| &possible_parents_fops); |
| |
| if (core->ops->debug_init) |
| core->ops->debug_init(core->hw, core->dentry); |
| } |
| |
| /** |
| * clk_debug_register - add a clk node to the debugfs clk directory |
| * @core: the clk being added to the debugfs clk directory |
| * |
| * Dynamically adds a clk to the debugfs clk directory if debugfs has been |
| * initialized. Otherwise it bails out early since the debugfs clk directory |
| * will be created lazily by clk_debug_init as part of a late_initcall. |
| */ |
| static void clk_debug_register(struct clk_core *core) |
| { |
| mutex_lock(&clk_debug_lock); |
| hlist_add_head(&core->debug_node, &clk_debug_list); |
| if (inited) |
| clk_debug_create_one(core, rootdir); |
| mutex_unlock(&clk_debug_lock); |
| } |
| |
| /** |
| * clk_debug_unregister - remove a clk node from the debugfs clk directory |
| * @core: the clk being removed from the debugfs clk directory |
| * |
| * Dynamically removes a clk and all its child nodes from the |
| * debugfs clk directory if clk->dentry points to debugfs created by |
| * clk_debug_register in __clk_core_init. |
| */ |
| static void clk_debug_unregister(struct clk_core *core) |
| { |
| mutex_lock(&clk_debug_lock); |
| hlist_del_init(&core->debug_node); |
| debugfs_remove_recursive(core->dentry); |
| core->dentry = NULL; |
| mutex_unlock(&clk_debug_lock); |
| } |
| |
| /** |
| * clk_debug_init - lazily populate the debugfs clk directory |
| * |
| * clks are often initialized very early during boot before memory can be |
| * dynamically allocated and well before debugfs is setup. This function |
| * populates the debugfs clk directory once at boot-time when we know that |
| * debugfs is setup. It should only be called once at boot-time, all other clks |
| * added dynamically will be done so with clk_debug_register. |
| */ |
| static int __init clk_debug_init(void) |
| { |
| struct clk_core *core; |
| |
| rootdir = debugfs_create_dir("clk", NULL); |
| |
| debugfs_create_file("clk_summary", 0444, rootdir, &all_lists, |
| &clk_summary_fops); |
| debugfs_create_file("clk_dump", 0444, rootdir, &all_lists, |
| &clk_dump_fops); |
| debugfs_create_file("clk_orphan_summary", 0444, rootdir, &orphan_list, |
| &clk_summary_fops); |
| debugfs_create_file("clk_orphan_dump", 0444, rootdir, &orphan_list, |
| &clk_dump_fops); |
| |
| mutex_lock(&clk_debug_lock); |
| hlist_for_each_entry(core, &clk_debug_list, debug_node) |
| clk_debug_create_one(core, rootdir); |
| |
| inited = 1; |
| mutex_unlock(&clk_debug_lock); |
| |
| return 0; |
| } |
| late_initcall(clk_debug_init); |
| #else |
| static inline void clk_debug_register(struct clk_core *core) { } |
| static inline void clk_debug_unregister(struct clk_core *core) |
| { |
| } |
| #endif |
| |
| static void clk_core_reparent_orphans_nolock(void) |
| { |
| struct clk_core *orphan; |
| struct hlist_node *tmp2; |
| |
| /* |
| * walk the list of orphan clocks and reparent any that newly finds a |
| * parent. |
| */ |
| hlist_for_each_entry_safe(orphan, tmp2, &clk_orphan_list, |