diff --git a/Documentation/arm/mem_alignment b/Documentation/arm/mem_alignment
index d145ccca..c7c7a11 100644
--- a/Documentation/arm/mem_alignment
+++ b/Documentation/arm/mem_alignment
@@ -24,7 +24,7 @@
 space, and might cause programs to fail unexpectedly.
 
 To change the alignment trap behavior, simply echo a number into
-/proc/sys/debug/alignment.  The number is made up from various bits:
+/proc/cpu/alignment.  The number is made up from various bits:
 
 bit		behavior when set
 ---		-----------------
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index e0f346d..c9115c1 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -220,14 +220,17 @@
 			Bits in debug_level correspond to a level in
 			ACPI_DEBUG_PRINT statements, e.g.,
 			    ACPI_DEBUG_PRINT((ACPI_DB_INFO, ...
-			See Documentation/acpi/debug.txt for more information
-			about debug layers and levels.
+			The debug_level mask defaults to "info".  See
+			Documentation/acpi/debug.txt for more information about
+			debug layers and levels.
 
+			Enable processor driver info messages:
+			    acpi.debug_layer=0x20000000
+			Enable PCI/PCI interrupt routing info messages:
+			    acpi.debug_layer=0x400000
 			Enable AML "Debug" output, i.e., stores to the Debug
 			object while interpreting AML:
 			    acpi.debug_layer=0xffffffff acpi.debug_level=0x2
-			Enable PCI/PCI interrupt routing info messages:
-			    acpi.debug_layer=0x400000 acpi.debug_level=0x4
 			Enable all messages related to ACPI hardware:
 			    acpi.debug_layer=0x2 acpi.debug_level=0xffffffff
 
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 3cd2ad9..394d7d3 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -1063,6 +1063,7 @@
 
 	STAC9227/9228/9229/927x
 	  ref		Reference board
+	  ref-no-jd	Reference board without HP/Mic jack detection
 	  3stack	D965 3stack
 	  5stack	D965 5stack + SPDIF
 	  dell-3stack	Dell Dimension E520
@@ -1076,6 +1077,7 @@
 
 	STAC92HD73*
 	  ref		Reference board
+	  no-jd		BIOS setup but without jack-detection
 	  dell-m6-amic	Dell desktops/laptops with analog mics
 	  dell-m6-dmic	Dell desktops/laptops with digital mics
 	  dell-m6	Dell desktops/laptops with both type of mics
diff --git a/Documentation/usb/gadget_serial.txt b/Documentation/usb/gadget_serial.txt
index 9b22bd1..eac7df9 100644
--- a/Documentation/usb/gadget_serial.txt
+++ b/Documentation/usb/gadget_serial.txt
@@ -114,11 +114,11 @@
 Then you must load the gadget serial driver.  To load it as an
 ACM device (recommended for interoperability), do this:
 
-  modprobe g_serial use_acm=1
+  modprobe g_serial
 
 To load it as a vendor specific bulk in/out device, do this:
 
-  modprobe g_serial
+  modprobe g_serial use_acm=0
 
 This will also automatically load the underlying gadget peripheral
 controller driver.  This must be done each time you reboot the gadget
diff --git a/Documentation/usb/proc_usb_info.txt b/Documentation/usb/proc_usb_info.txt
index 077e903..fafcd47 100644
--- a/Documentation/usb/proc_usb_info.txt
+++ b/Documentation/usb/proc_usb_info.txt
@@ -49,8 +49,10 @@
 
 These files can be read as binary data.  The binary data consists
 of first the device descriptor, then the descriptors for each
-configuration of the device.  That information is also shown in
-text form by the /proc/bus/usb/devices file, described later.
+configuration of the device.  Multi-byte fields in the device and
+configuration descriptors, but not other descriptors, are converted
+to host endianness by the kernel.  This information is also shown
+in text form by the /proc/bus/usb/devices file, described later.
 
 These files may also be used to write user-level drivers for the USB
 devices.  You would open the /proc/bus/usb/BBB/DDD file read/write,
diff --git a/Documentation/usb/usbmon.txt b/Documentation/usb/usbmon.txt
index 2917ce4..2704819 100644
--- a/Documentation/usb/usbmon.txt
+++ b/Documentation/usb/usbmon.txt
@@ -34,11 +34,12 @@
 Verify that bus sockets are present.
 
 # ls /sys/kernel/debug/usbmon
-0s  0t  0u  1s  1t  1u  2s  2t  2u  3s  3t  3u  4s  4t  4u
+0s  0u  1s  1t  1u  2s  2t  2u  3s  3t  3u  4s  4t  4u
 #
 
-Now you can choose to either use the sockets numbered '0' (to capture packets on
-all buses), and skip to step #3, or find the bus used by your device with step #2.
+Now you can choose to either use the socket '0u' (to capture packets on all
+buses), and skip to step #3, or find the bus used by your device with step #2.
+This allows to filter away annoying devices that talk continuously.
 
 2. Find which bus connects to the desired device
 
@@ -99,8 +100,9 @@
 
 Here is the list of words, from left to right:
 
-- URB Tag. This is used to identify URBs is normally a kernel mode address
- of the URB structure in hexadecimal.
+- URB Tag. This is used to identify URBs, and is normally an in-kernel address
+  of the URB structure in hexadecimal, but can be a sequence number or any
+  other unique string, within reason.
 
 - Timestamp in microseconds, a decimal number. The timestamp's resolution
   depends on available clock, and so it can be much worse than a microsecond
diff --git a/MAINTAINERS b/MAINTAINERS
index d92299e..fbc8fa5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1527,10 +1527,10 @@
 S:	Maintained
 
 ECRYPT FILE SYSTEM
-P:	Mike Halcrow, Phillip Hellewell
-M:	mhalcrow@us.ibm.com, phillip@hellewell.homeip.net
-L:	ecryptfs-devel@lists.sourceforge.net
-W:	http://ecryptfs.sourceforge.net/
+P:	Tyler Hicks, Dustin Kirkland
+M:	tyhicks@linux.vnet.ibm.com, kirkland@canonical.com
+L:	ecryptfs-devel@lists.launchpad.net
+W:	https://launchpad.net/ecryptfs
 S:	Supported
 
 EDAC-CORE
@@ -2191,9 +2191,9 @@
 
 INOTIFY
 P:	John McCutchan
-M:	ttb@tentacle.dhs.org
+M:	john@johnmccutchan.com
 P:	Robert Love
-M:	rml@novell.com
+M:	rlove@rlove.org
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 
diff --git a/Makefile b/Makefile
index 6c2f51b..4c8d797 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 28
-EXTRAVERSION = -rc8
+EXTRAVERSION = -rc9
 NAME = Erotic Pickled Herring
 
 # *DOCUMENTATION*
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index 47ccec9..ef12794 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -630,7 +630,7 @@
 		return -ENOMEM;
 
 	sachip->clk = clk_get(me, "SA1111_CLK");
-	if (!sachip->clk) {
+	if (IS_ERR(sachip->clk)) {
 		ret = PTR_ERR(sachip->clk);
 		goto err_free;
 	}
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
index c74f766..23af3c9 100644
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -115,6 +115,8 @@
 EXPORT_SYMBOL(__strncpy_from_user);
 
 #ifdef CONFIG_MMU
+EXPORT_SYMBOL(copy_page);
+
 EXPORT_SYMBOL(__copy_from_user);
 EXPORT_SYMBOL(__copy_to_user);
 EXPORT_SYMBOL(__clear_user);
@@ -181,8 +183,6 @@
 EXPORT_SYMBOL(_find_next_bit_be);
 #endif
 
-EXPORT_SYMBOL(copy_page);
-
 #ifdef CONFIG_FUNCTION_TRACER
 EXPORT_SYMBOL(mcount);
 #endif
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 57e6874..79abc4d 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -18,6 +18,7 @@
 #include <linux/personality.h>
 #include <linux/kallsyms.h>
 #include <linux/delay.h>
+#include <linux/hardirq.h>
 #include <linux/init.h>
 #include <linux/uaccess.h>
 
diff --git a/arch/arm/mach-pxa/include/mach/reset.h b/arch/arm/mach-pxa/include/mach/reset.h
index 7b8842c..31e6a7b 100644
--- a/arch/arm/mach-pxa/include/mach/reset.h
+++ b/arch/arm/mach-pxa/include/mach/reset.h
@@ -12,9 +12,8 @@
 
 /**
  * init_gpio_reset() - register GPIO as reset generator
- *
- * @gpio - gpio nr
- * @output - set gpio as out/low instead of input during normal work
+ * @gpio: gpio nr
+ * @output: set gpio as out/low instead of input during normal work
  */
 extern int init_gpio_reset(int gpio, int output);
 
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 2df8d9f..22c9530 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -11,6 +11,7 @@
 #include <linux/module.h>
 #include <linux/signal.h>
 #include <linux/mm.h>
+#include <linux/hardirq.h>
 #include <linux/init.h>
 #include <linux/kprobes.h>
 #include <linux/uaccess.h>
diff --git a/arch/avr32/boards/favr-32/flash.c b/arch/avr32/boards/favr-32/flash.c
index 5f139b7..604bbd5 100644
--- a/arch/avr32/boards/favr-32/flash.c
+++ b/arch/avr32/boards/favr-32/flash.c
@@ -13,7 +13,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 
-#include <asm/arch/smc.h>
+#include <mach/smc.h>
 
 static struct smc_timing flash_timing __initdata = {
 	.ncs_read_setup		= 0,
diff --git a/arch/avr32/boards/favr-32/setup.c b/arch/avr32/boards/favr-32/setup.c
index 7538f3d..1ee4faf 100644
--- a/arch/avr32/boards/favr-32/setup.c
+++ b/arch/avr32/boards/favr-32/setup.c
@@ -25,10 +25,10 @@
 
 #include <asm/setup.h>
 
-#include <asm/arch/at32ap700x.h>
-#include <asm/arch/init.h>
-#include <asm/arch/board.h>
-#include <asm/arch/portmux.h>
+#include <mach/at32ap700x.h>
+#include <mach/init.h>
+#include <mach/board.h>
+#include <mach/portmux.h>
 
 /* Oscillator frequencies. These are board-specific */
 unsigned long at32_board_osc_rates[3] = {
diff --git a/arch/avr32/boot/images/Makefile b/arch/avr32/boot/images/Makefile
index 219720a..1848bf0d 100644
--- a/arch/avr32/boot/images/Makefile
+++ b/arch/avr32/boot/images/Makefile
@@ -10,7 +10,7 @@
 
 extra-y		:= vmlinux.bin vmlinux.gz
 
-OBJCOPYFLAGS_vmlinux.bin := -O binary
+OBJCOPYFLAGS_vmlinux.bin := -O binary -R .note.gnu.build-id
 $(obj)/vmlinux.bin: vmlinux FORCE
 	$(call if_changed,objcopy)
 
diff --git a/arch/avr32/configs/atstk1006_defconfig b/arch/avr32/configs/atstk1006_defconfig
index 8b6e54c..6c45a3b 100644
--- a/arch/avr32/configs/atstk1006_defconfig
+++ b/arch/avr32/configs/atstk1006_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc1
-# Tue Aug  5 15:40:26 2008
+# Linux kernel version: 2.6.28-rc8
+# Thu Dec 18 11:22:23 2008
 #
 CONFIG_AVR32=y
 CONFIG_GENERIC_GPIO=y
@@ -67,6 +67,7 @@
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
@@ -77,15 +78,8 @@
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
 CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -118,6 +112,7 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
 
 #
 # System Type and features
@@ -134,6 +129,8 @@
 CONFIG_CPU_AT32AP7000=y
 CONFIG_BOARD_ATSTK1000=y
 # CONFIG_BOARD_ATNGW100 is not set
+# CONFIG_BOARD_FAVR_32 is not set
+# CONFIG_BOARD_MIMC200 is not set
 # CONFIG_BOARD_ATSTK1002 is not set
 # CONFIG_BOARD_ATSTK1003 is not set
 # CONFIG_BOARD_ATSTK1004 is not set
@@ -171,14 +168,14 @@
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 # CONFIG_OWNERSHIP_TRACE is not set
 CONFIG_NMI_DEBUGGING=y
 # CONFIG_HZ_100 is not set
@@ -186,7 +183,7 @@
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_CMDLINE=""
 
 #
@@ -228,6 +225,8 @@
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 CONFIG_NET=y
 
@@ -299,6 +298,7 @@
 # CONFIG_ATM is not set
 CONFIG_STP=m
 CONFIG_BRIDGE=m
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
@@ -321,14 +321,8 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -359,6 +353,7 @@
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_HAVE_MTD_OTP=y
 CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
@@ -407,6 +402,8 @@
 # Self-contained MTD device drivers
 #
 CONFIG_MTD_DATAFLASH=m
+# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
+CONFIG_MTD_DATAFLASH_OTP=y
 CONFIG_MTD_M25P80=m
 CONFIG_M25PXX_USE_FAST_READ=y
 # CONFIG_MTD_SLRAM is not set
@@ -464,9 +461,10 @@
 CONFIG_ATMEL_TCB_CLKSRC=y
 CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
 CONFIG_ATMEL_SSC=m
 # CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HAVE_IDE is not set
+# CONFIG_C2PORT is not set
 
 #
 # SCSI device support
@@ -548,6 +546,9 @@
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -653,6 +654,7 @@
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOBIT=m
 
 #
@@ -717,6 +719,10 @@
 CONFIG_GPIO_SYSFS=y
 
 #
+# Memory mapped GPIO expanders:
+#
+
+#
 # I2C GPIO expanders:
 #
 # CONFIG_GPIO_MAX732X is not set
@@ -745,11 +751,11 @@
 #
 # CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT32AP700X_WDT=y
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -758,6 +764,10 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -783,6 +793,7 @@
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -804,10 +815,13 @@
 # CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_ATMEL=y
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_LTV350QV=y
 # CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
 # CONFIG_LCD_VGG2432A4 is not set
 # CONFIG_LCD_PLATFORM is not set
 # CONFIG_BACKLIGHT_CLASS_DEVICE is not set
@@ -818,6 +832,7 @@
 # CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_LOGO is not set
 CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -848,28 +863,32 @@
 # CONFIG_USB_ARCH_HAS_EHCI is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG is not set
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
 # CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
 CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_AT91 is not set
 CONFIG_USB_GADGET_ATMEL_USBA=y
 CONFIG_USB_ATMEL_USBA=y
 # CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
@@ -887,7 +906,7 @@
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
-# MMC/SD Card Drivers
+# MMC/SD/SDIO Card Drivers
 #
 CONFIG_MMC_BLOCK=y
 CONFIG_MMC_BLOCK_BOUNCE=y
@@ -895,10 +914,11 @@
 # CONFIG_MMC_TEST is not set
 
 #
-# MMC/SD Host Controller Drivers
+# MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
 CONFIG_MMC_ATMELMCI=y
+# CONFIG_MMC_ATMELMCI_DMA is not set
 CONFIG_MMC_SPI=m
 # CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
@@ -918,6 +938,7 @@
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
 # CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
@@ -950,25 +971,31 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
 #
 # CONFIG_RTC_DRV_M41T94 is not set
 # CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
 
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -989,6 +1016,8 @@
 # CONFIG_NET_DMA is not set
 CONFIG_DMATEST=m
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # File systems
@@ -998,12 +1027,17 @@
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4_FS=m
+CONFIG_EXT4DEV_COMPAT=y
+# CONFIG_EXT4_FS_XATTR is not set
 CONFIG_JBD=m
 # CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+# CONFIG_JBD2_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
@@ -1036,6 +1070,7 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -1054,7 +1089,8 @@
 # CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_WRITEBUFFER is not set
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
@@ -1088,6 +1124,7 @@
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1185,10 +1222,21 @@
 CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_KPROBES_SANITY_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
+
+#
+# Tracers
+#
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 
 #
@@ -1196,17 +1244,26 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+CONFIG_CRYPTO_FIPS=y
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1257,7 +1314,7 @@
 #
 # Ciphers
 #
-# CONFIG_CRYPTO_AES is not set
+CONFIG_CRYPTO_AES=m
 # CONFIG_CRYPTO_ANUBIS is not set
 # CONFIG_CRYPTO_ARC4 is not set
 # CONFIG_CRYPTO_BLOWFISH is not set
@@ -1278,14 +1335,17 @@
 #
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
 # CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=m
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 0c6e02f..066252e 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -967,28 +967,28 @@
 {
 	u32 pin_mask = (1 << 8) | (1 << 9); /* RXD & TXD */
 
-	select_peripheral(PIOA, pin_mask, PERIPH_B, 0);
+	select_peripheral(PIOA, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
 }
 
 static inline void configure_usart1_pins(void)
 {
 	u32 pin_mask = (1 << 17) | (1 << 18); /* RXD & TXD */
 
-	select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
+	select_peripheral(PIOA, pin_mask, PERIPH_A, AT32_GPIOF_PULLUP);
 }
 
 static inline void configure_usart2_pins(void)
 {
 	u32 pin_mask = (1 << 26) | (1 << 27); /* RXD & TXD */
 
-	select_peripheral(PIOB, pin_mask, PERIPH_B, 0);
+	select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
 }
 
 static inline void configure_usart3_pins(void)
 {
 	u32 pin_mask = (1 << 18) | (1 << 17); /* RXD & TXD */
 
-	select_peripheral(PIOB, pin_mask, PERIPH_B, 0);
+	select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
 }
 
 static struct platform_device *__initdata at32_usarts[4];
diff --git a/arch/ia64/hp/sim/Kconfig b/arch/ia64/hp/sim/Kconfig
index f92306b..8d513a8 100644
--- a/arch/ia64/hp/sim/Kconfig
+++ b/arch/ia64/hp/sim/Kconfig
@@ -4,6 +4,7 @@
 
 config HP_SIMETH
 	bool "Simulated Ethernet "
+	depends on NET
 
 config HP_SIMSERIAL
 	bool "Simulated serial driver support"
diff --git a/arch/mips/include/asm/byteorder.h b/arch/mips/include/asm/byteorder.h
index 2988d29..33790b9 100644
--- a/arch/mips/include/asm/byteorder.h
+++ b/arch/mips/include/asm/byteorder.h
@@ -50,9 +50,8 @@
 static inline __attribute_const__ __u64 __arch_swab64(__u64 x)
 {
 	__asm__(
-	"	dsbh	%0, %1			\n"
-	"	dshd	%0, %0			\n"
-	"	drotr	%0, %0, 32		\n"
+	"	dsbh	%0, %1\n"
+	"	dshd	%0, %0"
 	: "=r" (x)
 	: "r" (x));
 
diff --git a/arch/mips/include/asm/elf.h b/arch/mips/include/asm/elf.h
index a8eac16..d58f128 100644
--- a/arch/mips/include/asm/elf.h
+++ b/arch/mips/include/asm/elf.h
@@ -232,7 +232,7 @@
  */
 #ifdef __MIPSEB__
 #define ELF_DATA	ELFDATA2MSB
-#elif __MIPSEL__
+#elif defined(__MIPSEL__)
 #define ELF_DATA	ELFDATA2LSB
 #endif
 #define ELF_ARCH	EM_MIPS
diff --git a/arch/parisc/include/asm/tlbflush.h b/arch/parisc/include/asm/tlbflush.h
index b72ec66..1f6fd4f 100644
--- a/arch/parisc/include/asm/tlbflush.h
+++ b/arch/parisc/include/asm/tlbflush.h
@@ -44,9 +44,12 @@
 {
 	BUG_ON(mm == &init_mm); /* Should never happen */
 
-#ifdef CONFIG_SMP
+#if 1 || defined(CONFIG_SMP)
 	flush_tlb_all();
 #else
+	/* FIXME: currently broken, causing space id and protection ids
+	 *  to go out of sync, resulting in faults on userspace accesses.
+	 */
 	if (mm) {
 		if (mm->context != 0)
 			free_sid(mm->context);
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index d108715..5c33bc1 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -486,13 +486,13 @@
 	tlbsx	0,r3
 	mfspr	r4,SPRN_MAS1		/* check valid */
 	andis.	r3,r4,MAS1_VALID@h
-	beqlr
+	beq	1f
 	rlwinm	r4,r4,0,1,31
 	mtspr	SPRN_MAS1,r4
 	tlbwe
 	msync
 	isync
-	wrtee	r10
+1:	wrtee	r10
 	blr
 #endif /* CONFIG_FSL_BOOKE */
 
diff --git a/arch/powerpc/lib/rheap.c b/arch/powerpc/lib/rheap.c
index 29b2941..45907c1 100644
--- a/arch/powerpc/lib/rheap.c
+++ b/arch/powerpc/lib/rheap.c
@@ -556,6 +556,7 @@
 		be = blk->start + blk->size;
 		if (s >= bs && e <= be)
 			break;
+		blk = NULL;
 	}
 
 	if (blk == NULL)
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 7bbf4e4..f0c3b88 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -507,6 +507,9 @@
 {
 	struct hstate *hstate = hstate_file(file);
 	int mmu_psize = shift_to_mmu_psize(huge_page_shift(hstate));
+
+	if (!mmu_huge_psizes[mmu_psize])
+		return -EINVAL;
 	return slice_get_unmapped_area(addr, len, flags, mmu_psize, 1, 0);
 }
 
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index a8397bb..cf81049 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -901,10 +901,17 @@
 			if (end_pfn > node_ar.end_pfn)
 				reserve_size = (node_ar.end_pfn << PAGE_SHIFT)
 					- (start_pfn << PAGE_SHIFT);
-			dbg("reserve_bootmem %lx %lx nid=%d\n", physbase,
-				reserve_size, node_ar.nid);
-			reserve_bootmem_node(NODE_DATA(node_ar.nid), physbase,
-						reserve_size, BOOTMEM_DEFAULT);
+			/*
+			 * Only worry about *this* node, others may not
+			 * yet have valid NODE_DATA().
+			 */
+			if (node_ar.nid == nid) {
+				dbg("reserve_bootmem %lx %lx nid=%d\n",
+					physbase, reserve_size, node_ar.nid);
+				reserve_bootmem_node(NODE_DATA(node_ar.nid),
+						physbase, reserve_size,
+						BOOTMEM_DEFAULT);
+			}
 			/*
 			 * if reserved region is contained in the active region
 			 * then done.
@@ -929,7 +936,6 @@
 void __init do_init_bootmem(void)
 {
 	int nid;
-	unsigned int i;
 
 	min_low_pfn = 0;
 	max_low_pfn = lmb_end_of_DRAM() >> PAGE_SHIFT;
diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c
index 442cf36..0ce45c2 100644
--- a/arch/powerpc/platforms/cell/axon_msi.c
+++ b/arch/powerpc/platforms/cell/axon_msi.c
@@ -413,6 +413,9 @@
 			MSIC_CTRL_IRQ_ENABLE | MSIC_CTRL_ENABLE |
 			MSIC_CTRL_FIFO_SIZE);
 
+	msic->read_offset = dcr_read(msic->dcr_host, MSIC_WRITE_OFFSET_REG)
+				& MSIC_FIFO_SIZE_MASK;
+
 	device->dev.platform_data = msic;
 
 	ppc_md.setup_msi_irqs = axon_msi_setup_msi_irqs;
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 80119b3..5c9cbfc 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -55,6 +55,8 @@
 
 config GENERIC_HARDIRQS_NO__DO_IRQ
 	def_bool y
+	depends on SUPERH32 && (!SH_DREAMCAST && !SH_SH4202_MICRODEV && \
+				!SH_7751_SYSTEMH && !HD64461)
 
 config GENERIC_IRQ_PROBE
 	def_bool y
diff --git a/arch/sparc/include/asm/ptrace_32.h b/arch/sparc/include/asm/ptrace_32.h
index d409c4f..4cef450 100644
--- a/arch/sparc/include/asm/ptrace_32.h
+++ b/arch/sparc/include/asm/ptrace_32.h
@@ -62,6 +62,8 @@
 
 #ifdef __KERNEL__
 
+#include <asm/system.h>
+
 static inline bool pt_regs_is_syscall(struct pt_regs *regs)
 {
 	return (regs->psr & PSR_SYSCALL);
@@ -72,6 +74,14 @@
 	return (regs->psr &= ~PSR_SYSCALL);
 }
 
+#define arch_ptrace_stop_needed(exit_code, info) \
+({	flush_user_windows(); \
+	current_thread_info()->w_saved != 0;	\
+})
+
+#define arch_ptrace_stop(exit_code, info) \
+	synchronize_user_stack()
+
 #define user_mode(regs) (!((regs)->psr & PSR_PS))
 #define instruction_pointer(regs) ((regs)->pc)
 #define user_stack_pointer(regs) ((regs)->u_regs[UREG_FP])
diff --git a/arch/sparc/include/asm/ptrace_64.h b/arch/sparc/include/asm/ptrace_64.h
index 84e969f..cd6fbfc 100644
--- a/arch/sparc/include/asm/ptrace_64.h
+++ b/arch/sparc/include/asm/ptrace_64.h
@@ -114,6 +114,7 @@
 #ifdef __KERNEL__
 
 #include <linux/threads.h>
+#include <asm/system.h>
 
 static inline int pt_regs_trap_type(struct pt_regs *regs)
 {
@@ -130,6 +131,14 @@
 	return (regs->tstate &= ~TSTATE_SYSCALL);
 }
 
+#define arch_ptrace_stop_needed(exit_code, info) \
+({	flush_user_windows(); \
+	get_thread_wsaved() != 0; \
+})
+
+#define arch_ptrace_stop(exit_code, info) \
+	synchronize_user_stack()
+
 struct global_reg_snapshot {
 	unsigned long		tstate;
 	unsigned long		tpc;
diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu
index b815664..8e99073 100644
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -520,6 +520,7 @@
 	bool "Branch Trace Store"
 	default y
 	depends on X86_DEBUGCTLMSR
+	depends on BROKEN
 	help
 	  This adds a ptrace interface to the hardware's branch trace store.
 
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index a7b6dec..0a60d60 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -235,8 +235,9 @@
 	status &= ~MMIO_STATUS_COM_WAIT_INT_MASK;
 	writel(status, iommu->mmio_base + MMIO_STATUS_OFFSET);
 
-	if (unlikely((i == EXIT_LOOP_COUNT) && printk_ratelimit()))
-		printk(KERN_WARNING "AMD IOMMU: Completion wait loop failed\n");
+	if (unlikely(i == EXIT_LOOP_COUNT))
+		panic("AMD IOMMU: Completion wait loop failed\n");
+
 out:
 	spin_unlock_irqrestore(&iommu->lock, flags);
 
diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c
index 30ae270..c6cc228 100644
--- a/arch/x86/kernel/amd_iommu_init.c
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -427,6 +427,10 @@
 	memcpy_toio(iommu->mmio_base + MMIO_CMD_BUF_OFFSET,
 			&entry, sizeof(entry));
 
+	/* set head and tail to zero manually */
+	writel(0x00, iommu->mmio_base + MMIO_CMD_HEAD_OFFSET);
+	writel(0x00, iommu->mmio_base + MMIO_CMD_TAIL_OFFSET);
+
 	iommu_feature_enable(iommu, CONTROL_CMDBUF_EN);
 
 	return cmd_buf;
@@ -1074,7 +1078,8 @@
 		goto free;
 
 	/* IOMMU rlookup table - find the IOMMU for a specific device */
-	amd_iommu_rlookup_table = (void *)__get_free_pages(GFP_KERNEL,
+	amd_iommu_rlookup_table = (void *)__get_free_pages(
+			GFP_KERNEL | __GFP_ZERO,
 			get_order(rlookup_table_size));
 	if (amd_iommu_rlookup_table == NULL)
 		goto free;
diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c
index 4b031a4..1c83803 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_64.c
@@ -510,12 +510,9 @@
  */
 void __cpuinit mcheck_init(struct cpuinfo_x86 *c)
 {
-	static cpumask_t mce_cpus = CPU_MASK_NONE;
-
 	mce_cpu_quirks(c);
 
 	if (mce_dont_init ||
-	    cpu_test_and_set(smp_processor_id(), mce_cpus) ||
 	    !mce_available(c))
 		return;
 
diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c
index 82fb280..c4b5b24 100644
--- a/arch/x86/kernel/microcode_core.c
+++ b/arch/x86/kernel/microcode_core.c
@@ -272,13 +272,18 @@
 	.name = "microcode",
 };
 
-static void microcode_fini_cpu(int cpu)
+static void __microcode_fini_cpu(int cpu)
 {
 	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
 
-	mutex_lock(&microcode_mutex);
 	microcode_ops->microcode_fini_cpu(cpu);
 	uci->valid = 0;
+}
+
+static void microcode_fini_cpu(int cpu)
+{
+	mutex_lock(&microcode_mutex);
+	__microcode_fini_cpu(cpu);
 	mutex_unlock(&microcode_mutex);
 }
 
@@ -306,12 +311,16 @@
 	 * to this cpu (a bit of paranoia):
 	 */
 	if (microcode_ops->collect_cpu_info(cpu, &nsig)) {
-		microcode_fini_cpu(cpu);
+		__microcode_fini_cpu(cpu);
+		printk(KERN_ERR "failed to collect_cpu_info for resuming cpu #%d\n",
+				cpu);
 		return -1;
 	}
 
-	if (memcmp(&nsig, &uci->cpu_sig, sizeof(nsig))) {
-		microcode_fini_cpu(cpu);
+	if ((nsig.sig != uci->cpu_sig.sig) || (nsig.pf != uci->cpu_sig.pf)) {
+		__microcode_fini_cpu(cpu);
+		printk(KERN_ERR "cached ucode doesn't match the resuming cpu #%d\n",
+				cpu);
 		/* Should we look for a new ucode here? */
 		return 1;
 	}
diff --git a/arch/x86/kernel/microcode_intel.c b/arch/x86/kernel/microcode_intel.c
index 622dc4a..a8e6279 100644
--- a/arch/x86/kernel/microcode_intel.c
+++ b/arch/x86/kernel/microcode_intel.c
@@ -155,6 +155,7 @@
 static int collect_cpu_info(int cpu_num, struct cpu_signature *csig)
 {
 	struct cpuinfo_x86 *c = &cpu_data(cpu_num);
+	unsigned long flags;
 	unsigned int val[2];
 
 	memset(csig, 0, sizeof(*csig));
@@ -174,11 +175,16 @@
 		csig->pf = 1 << ((val[1] >> 18) & 7);
 	}
 
+	/* serialize access to the physical write to MSR 0x79 */
+	spin_lock_irqsave(&microcode_update_lock, flags);
+
 	wrmsr(MSR_IA32_UCODE_REV, 0, 0);
 	/* see notes above for revision 1.07.  Apparent chip bug */
 	sync_core();
 	/* get the current revision from MSR 0x8B */
 	rdmsr(MSR_IA32_UCODE_REV, val[0], csig->rev);
+	spin_unlock_irqrestore(&microcode_update_lock, flags);
+
 	pr_debug("microcode: collect_cpu_info : sig=0x%x, pf=0x%x, rev=0x%x\n",
 			csig->sig, csig->pf, csig->rev);
 
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index ba7ad83..a35eaa3 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -745,10 +745,8 @@
 	unsigned long scratch;
 	long i;
 
-	if (cache_k8_northbridges() < 0 || num_k8_northbridges == 0) {
-		printk(KERN_INFO "PCI-GART: No AMD GART found.\n");
+	if (cache_k8_northbridges() < 0 || num_k8_northbridges == 0)
 		return;
-	}
 
 #ifndef CONFIG_AGP_AMD64
 	no_agp = 1;
diff --git a/crypto/async_tx/async_xor.c b/crypto/async_tx/async_xor.c
index c029d3e..595b786 100644
--- a/crypto/async_tx/async_xor.c
+++ b/crypto/async_tx/async_xor.c
@@ -53,10 +53,17 @@
 	int xor_src_cnt;
 	dma_addr_t dma_dest;
 
-	dma_dest = dma_map_page(dma->dev, dest, offset, len, DMA_FROM_DEVICE);
-	for (i = 0; i < src_cnt; i++)
+	/* map the dest bidrectional in case it is re-used as a source */
+	dma_dest = dma_map_page(dma->dev, dest, offset, len, DMA_BIDIRECTIONAL);
+	for (i = 0; i < src_cnt; i++) {
+		/* only map the dest once */
+		if (unlikely(src_list[i] == dest)) {
+			dma_src[i] = dma_dest;
+			continue;
+		}
 		dma_src[i] = dma_map_page(dma->dev, src_list[i], offset,
 					  len, DMA_TO_DEVICE);
+	}
 
 	while (src_cnt) {
 		async_flags = flags;
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index 7edf6d9..765fd1c5 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -688,14 +688,6 @@
 	if (acpi_disabled)
 		return;
 
-	/*
-	 * ACPI CA initializes acpi_dbg_level to non-zero, which means
-	 * we get debug output merely by turning on CONFIG_ACPI_DEBUG.
-	 * Turn it off so we don't get output unless the user specifies
-	 * acpi.debug_level.
-	 */
-	acpi_dbg_level = 0;
-
 	printk(KERN_INFO PREFIX "Core revision %08x\n", ACPI_CA_VERSION);
 
 	/* enable workarounds, unless strict ACPI spec. compliance */
diff --git a/drivers/acpi/toshiba_acpi.c b/drivers/acpi/toshiba_acpi.c
index 25f531d..40e60fc 100644
--- a/drivers/acpi/toshiba_acpi.c
+++ b/drivers/acpi/toshiba_acpi.c
@@ -824,32 +824,36 @@
 			toshiba_acpi_exit();
 			return -ENOMEM;
 		}
-	}
 
-	/* Register input device for kill switch */
-	toshiba_acpi.poll_dev = input_allocate_polled_device();
-	if (!toshiba_acpi.poll_dev) {
-		printk(MY_ERR "unable to allocate kill-switch input device\n");
-		toshiba_acpi_exit();
-		return -ENOMEM;
-	}
-	toshiba_acpi.poll_dev->private = &toshiba_acpi;
-	toshiba_acpi.poll_dev->poll = bt_poll_rfkill;
-	toshiba_acpi.poll_dev->poll_interval = 1000; /* msecs */
+		/* Register input device for kill switch */
+		toshiba_acpi.poll_dev = input_allocate_polled_device();
+		if (!toshiba_acpi.poll_dev) {
+			printk(MY_ERR
+			       "unable to allocate kill-switch input device\n");
+			toshiba_acpi_exit();
+			return -ENOMEM;
+		}
+		toshiba_acpi.poll_dev->private = &toshiba_acpi;
+		toshiba_acpi.poll_dev->poll = bt_poll_rfkill;
+		toshiba_acpi.poll_dev->poll_interval = 1000; /* msecs */
 
-	toshiba_acpi.poll_dev->input->name = toshiba_acpi.rfk_name;
-	toshiba_acpi.poll_dev->input->id.bustype = BUS_HOST;
-	toshiba_acpi.poll_dev->input->id.vendor = 0x0930; /* Toshiba USB ID */
-	set_bit(EV_SW, toshiba_acpi.poll_dev->input->evbit);
-	set_bit(SW_RFKILL_ALL, toshiba_acpi.poll_dev->input->swbit);
-	input_report_switch(toshiba_acpi.poll_dev->input, SW_RFKILL_ALL, TRUE);
-	input_sync(toshiba_acpi.poll_dev->input);
+		toshiba_acpi.poll_dev->input->name = toshiba_acpi.rfk_name;
+		toshiba_acpi.poll_dev->input->id.bustype = BUS_HOST;
+		/* Toshiba USB ID */
+		toshiba_acpi.poll_dev->input->id.vendor = 0x0930;
+		set_bit(EV_SW, toshiba_acpi.poll_dev->input->evbit);
+		set_bit(SW_RFKILL_ALL, toshiba_acpi.poll_dev->input->swbit);
+		input_report_switch(toshiba_acpi.poll_dev->input,
+				    SW_RFKILL_ALL, TRUE);
+		input_sync(toshiba_acpi.poll_dev->input);
 
-	ret = input_register_polled_device(toshiba_acpi.poll_dev);
-	if (ret) {
-		printk(MY_ERR "unable to register kill-switch input device\n");
-		toshiba_acpi_exit();
-		return ret;
+		ret = input_register_polled_device(toshiba_acpi.poll_dev);
+		if (ret) {
+			printk(MY_ERR
+			       "unable to register kill-switch input device\n");
+			toshiba_acpi_exit();
+			return ret;
+		}
 	}
 
 	return 0;
diff --git a/drivers/acpi/utilities/utglobal.c b/drivers/acpi/utilities/utglobal.c
index 670551b..17ed5ac 100644
--- a/drivers/acpi/utilities/utglobal.c
+++ b/drivers/acpi/utilities/utglobal.c
@@ -64,7 +64,7 @@
 
 /* Debug switch - layer (component) mask */
 
-u32 acpi_dbg_layer = ACPI_COMPONENT_DEFAULT | ACPI_ALL_DRIVERS;
+u32 acpi_dbg_layer = 0;
 u32 acpi_gbl_nesting_level = 0;
 
 /* Debugger globals */
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 5e2eb74..bc6695e 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4050,17 +4050,70 @@
 	{ "ST3160023AS",	"3.42",		ATA_HORKAGE_NONCQ },
 
 	/* Seagate NCQ + FLUSH CACHE firmware bug */
-	{ "ST31500341AS",	"9JU138",	ATA_HORKAGE_NONCQ |
+	{ "ST31500341AS",	"SD15",		ATA_HORKAGE_NONCQ |
 						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST31000333AS",	"9FZ136",	ATA_HORKAGE_NONCQ |
+	{ "ST31500341AS",	"SD16",		ATA_HORKAGE_NONCQ |
 						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST3640623AS",	"9FZ164",	ATA_HORKAGE_NONCQ |
+	{ "ST31500341AS",	"SD17",		ATA_HORKAGE_NONCQ |
 						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST3640323AS",	"9FZ134",	ATA_HORKAGE_NONCQ |
+	{ "ST31500341AS",	"SD18",		ATA_HORKAGE_NONCQ |
 						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST3320813AS",	"9FZ182",	ATA_HORKAGE_NONCQ |
+	{ "ST31500341AS",	"SD19",		ATA_HORKAGE_NONCQ |
 						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST3320613AS",	"9FZ162",	ATA_HORKAGE_NONCQ |
+
+	{ "ST31000333AS",	"SD15",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST31000333AS",	"SD16",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST31000333AS",	"SD17",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST31000333AS",	"SD18",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST31000333AS",	"SD19",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+
+	{ "ST3640623AS",	"SD15",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3640623AS",	"SD16",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3640623AS",	"SD17",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3640623AS",	"SD18",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3640623AS",	"SD19",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+
+	{ "ST3640323AS",	"SD15",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3640323AS",	"SD16",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3640323AS",	"SD17",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3640323AS",	"SD18",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3640323AS",	"SD19",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+
+	{ "ST3320813AS",	"SD15",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3320813AS",	"SD16",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3320813AS",	"SD17",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3320813AS",	"SD18",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3320813AS",	"SD19",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+
+	{ "ST3320613AS",	"SD15",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3320613AS",	"SD16",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3320613AS",	"SD17",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3320613AS",	"SD18",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3320613AS",	"SD19",		ATA_HORKAGE_NONCQ |
 						ATA_HORKAGE_FIRMWARE_WARN },
 
 	/* Blacklist entries taken from Silicon Image 3124/3132
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index a098ba8..e0c4f05 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -183,7 +183,9 @@
 			mask &= ~(0xF8 << ATA_SHIFT_UDMA);
 		if (hpt_dma_blacklisted(adev, "UDMA4", bad_ata66_4))
 			mask &= ~(0xF0 << ATA_SHIFT_UDMA);
-	}
+	} else if (adev->class == ATA_DEV_ATAPI)
+		mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
+
 	return ata_bmdma_mode_filter(adev, mask);
 }
 
@@ -211,11 +213,15 @@
 
 static int hpt36x_cable_detect(struct ata_port *ap)
 {
-	u8 ata66;
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	u8 ata66;
 
+	/*
+	 * Each channel of pata_hpt366 occupies separate PCI function
+	 * as the primary channel and bit1 indicates the cable type.
+	 */
 	pci_read_config_byte(pdev, 0x5A, &ata66);
-	if (ata66 & (1 << ap->port_no))
+	if (ata66 & 2)
 		return ATA_CBL_PATA40;
 	return ATA_CBL_PATA80;
 }
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 9364dc5..9f7c543 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -1693,6 +1693,11 @@
 	for (i = 0; i <= h->highest_lun; i++) {
 		int j;
 		drv_found = 0;
+
+		/* skip holes in the array from already deleted drives */
+		if (h->drv[i].raid_level == -1)
+			continue;
+
 		for (j = 0; j < num_luns; j++) {
 			memcpy(&lunid, &ld_buff->LUN[j][0], 4);
 			lunid = le32_to_cpu(lunid);
diff --git a/drivers/char/xilinx_hwicap/buffer_icap.c b/drivers/char/xilinx_hwicap/buffer_icap.c
index aa7f796..05d8977 100644
--- a/drivers/char/xilinx_hwicap/buffer_icap.c
+++ b/drivers/char/xilinx_hwicap/buffer_icap.c
@@ -21,9 +21,6 @@
  *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
  *     FOR A PARTICULAR PURPOSE.
  *
- *     Xilinx products are not intended for use in life support appliances,
- *     devices, or systems. Use in such applications is expressly prohibited.
- *
  *     (c) Copyright 2003-2008 Xilinx Inc.
  *     All rights reserved.
  *
diff --git a/drivers/char/xilinx_hwicap/buffer_icap.h b/drivers/char/xilinx_hwicap/buffer_icap.h
index 8b0252b..d4f419e 100644
--- a/drivers/char/xilinx_hwicap/buffer_icap.h
+++ b/drivers/char/xilinx_hwicap/buffer_icap.h
@@ -21,9 +21,6 @@
  *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
  *     FOR A PARTICULAR PURPOSE.
  *
- *     Xilinx products are not intended for use in life support appliances,
- *     devices, or systems. Use in such applications is expressly prohibited.
- *
  *     (c) Copyright 2003-2008 Xilinx Inc.
  *     All rights reserved.
  *
diff --git a/drivers/char/xilinx_hwicap/fifo_icap.c b/drivers/char/xilinx_hwicap/fifo_icap.c
index 776b505..02225eb 100644
--- a/drivers/char/xilinx_hwicap/fifo_icap.c
+++ b/drivers/char/xilinx_hwicap/fifo_icap.c
@@ -21,9 +21,6 @@
  *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
  *     FOR A PARTICULAR PURPOSE.
  *
- *     Xilinx products are not intended for use in life support appliances,
- *     devices, or systems. Use in such applications is expressly prohibited.
- *
  *     (c) Copyright 2007-2008 Xilinx Inc.
  *     All rights reserved.
  *
diff --git a/drivers/char/xilinx_hwicap/fifo_icap.h b/drivers/char/xilinx_hwicap/fifo_icap.h
index 62bda45..4c9dd9a 100644
--- a/drivers/char/xilinx_hwicap/fifo_icap.h
+++ b/drivers/char/xilinx_hwicap/fifo_icap.h
@@ -21,9 +21,6 @@
  *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
  *     FOR A PARTICULAR PURPOSE.
  *
- *     Xilinx products are not intended for use in life support appliances,
- *     devices, or systems. Use in such applications is expressly prohibited.
- *
  *     (c) Copyright 2007-2008 Xilinx Inc.
  *     All rights reserved.
  *
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
index d161319..f40ab69 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
@@ -21,9 +21,6 @@
  *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
  *     FOR A PARTICULAR PURPOSE.
  *
- *     Xilinx products are not intended for use in life support appliances,
- *     devices, or systems. Use in such applications is expressly prohibited.
- *
  *     (c) Copyright 2002 Xilinx Inc., Systems Engineering Group
  *     (c) Copyright 2004 Xilinx Inc., Systems Engineering Group
  *     (c) Copyright 2007-2008 Xilinx Inc.
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.h b/drivers/char/xilinx_hwicap/xilinx_hwicap.h
index 24d0d9b..8cca119 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.h
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.h
@@ -21,9 +21,6 @@
  *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
  *     FOR A PARTICULAR PURPOSE.
  *
- *     Xilinx products are not intended for use in life support appliances,
- *     devices, or systems. Use in such applications is expressly prohibited.
- *
  *     (c) Copyright 2003-2007 Xilinx Inc.
  *     All rights reserved.
  *
diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
index 5317e08..6579965 100644
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -388,7 +388,10 @@
 
 	init_completion(&device->done);
 	kref_init(&device->refcount);
+
+	mutex_lock(&dma_list_mutex);
 	device->dev_id = id++;
+	mutex_unlock(&dma_list_mutex);
 
 	/* represent channels in sysfs. Probably want devs too */
 	list_for_each_entry(chan, &device->channels, device_node) {
diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c
index ecd743f..6607fdd 100644
--- a/drivers/dma/ioat_dma.c
+++ b/drivers/dma/ioat_dma.c
@@ -1341,10 +1341,12 @@
  */
 #define IOAT_TEST_SIZE 2000
 
+DECLARE_COMPLETION(test_completion);
 static void ioat_dma_test_callback(void *dma_async_param)
 {
 	printk(KERN_ERR "ioatdma: ioat_dma_test_callback(%p)\n",
 		dma_async_param);
+	complete(&test_completion);
 }
 
 /**
@@ -1410,7 +1412,8 @@
 		goto free_resources;
 	}
 	device->common.device_issue_pending(dma_chan);
-	msleep(1);
+
+	wait_for_completion_timeout(&test_completion, msecs_to_jiffies(3000));
 
 	if (device->common.device_is_tx_complete(dma_chan, cookie, NULL, NULL)
 					!= DMA_SUCCESS) {
diff --git a/drivers/dma/iop-adma.c b/drivers/dma/iop-adma.c
index c7a9306..6be3172 100644
--- a/drivers/dma/iop-adma.c
+++ b/drivers/dma/iop-adma.c
@@ -85,18 +85,28 @@
 			enum dma_ctrl_flags flags = desc->async_tx.flags;
 			u32 src_cnt;
 			dma_addr_t addr;
+			dma_addr_t dest;
 
+			src_cnt = unmap->unmap_src_cnt;
+			dest = iop_desc_get_dest_addr(unmap, iop_chan);
 			if (!(flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
-				addr = iop_desc_get_dest_addr(unmap, iop_chan);
-				dma_unmap_page(dev, addr, len, DMA_FROM_DEVICE);
+				enum dma_data_direction dir;
+
+				if (src_cnt > 1) /* is xor? */
+					dir = DMA_BIDIRECTIONAL;
+				else
+					dir = DMA_FROM_DEVICE;
+
+				dma_unmap_page(dev, dest, len, dir);
 			}
 
 			if (!(flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
-				src_cnt = unmap->unmap_src_cnt;
 				while (src_cnt--) {
 					addr = iop_desc_get_src_addr(unmap,
 								     iop_chan,
 								     src_cnt);
+					if (addr == dest)
+						continue;
 					dma_unmap_page(dev, addr, len,
 						       DMA_TO_DEVICE);
 				}
diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c
index 0328da0..bcda174 100644
--- a/drivers/dma/mv_xor.c
+++ b/drivers/dma/mv_xor.c
@@ -311,17 +311,26 @@
 			enum dma_ctrl_flags flags = desc->async_tx.flags;
 			u32 src_cnt;
 			dma_addr_t addr;
+			dma_addr_t dest;
 
+			src_cnt = unmap->unmap_src_cnt;
+			dest = mv_desc_get_dest_addr(unmap);
 			if (!(flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
-				addr = mv_desc_get_dest_addr(unmap);
-				dma_unmap_page(dev, addr, len, DMA_FROM_DEVICE);
+				enum dma_data_direction dir;
+
+				if (src_cnt > 1) /* is xor ? */
+					dir = DMA_BIDIRECTIONAL;
+				else
+					dir = DMA_FROM_DEVICE;
+				dma_unmap_page(dev, dest, len, dir);
 			}
 
 			if (!(flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
-				src_cnt = unmap->unmap_src_cnt;
 				while (src_cnt--) {
 					addr = mv_desc_get_src_addr(unmap,
 								    src_cnt);
+					if (addr == dest)
+						continue;
 					dma_unmap_page(dev, addr, len,
 						       DMA_TO_DEVICE);
 				}
diff --git a/drivers/edac/edac_device.c b/drivers/edac/edac_device.c
index 5fcd3d8..4041e91 100644
--- a/drivers/edac/edac_device.c
+++ b/drivers/edac/edac_device.c
@@ -394,6 +394,12 @@
 
 	mutex_lock(&device_ctls_mutex);
 
+	/* If we are being removed, bail out immediately */
+	if (edac_dev->op_state == OP_OFFLINE) {
+		mutex_unlock(&device_ctls_mutex);
+		return;
+	}
+
 	/* Only poll controllers that are running polled and have a check */
 	if ((edac_dev->op_state == OP_RUNNING_POLL) &&
 		(edac_dev->edac_check != NULL)) {
@@ -585,14 +591,14 @@
 	/* mark this instance as OFFLINE */
 	edac_dev->op_state = OP_OFFLINE;
 
-	/* clear workq processing on this instance */
-	edac_device_workq_teardown(edac_dev);
-
 	/* deregister from global list */
 	del_edac_device_from_global_list(edac_dev);
 
 	mutex_unlock(&device_ctls_mutex);
 
+	/* clear workq processing on this instance */
+	edac_device_workq_teardown(edac_dev);
+
 	/* Tear down the sysfs entries for this instance */
 	edac_device_remove_sysfs(edac_dev);
 
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 553dd4b..afa8a12 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -717,7 +717,7 @@
 		value = dev->pci_device;
 		break;
 	case I915_PARAM_HAS_GEM:
-		value = 1;
+		value = dev_priv->has_gem;
 		break;
 	default:
 		DRM_ERROR("Unknown parameter %d\n", param->param);
@@ -830,6 +830,14 @@
 
 	dev_priv->regs = ioremap(base, size);
 
+#ifdef CONFIG_HIGHMEM64G
+	/* don't enable GEM on PAE - needs agp + set_memory_* interface fixes */
+	dev_priv->has_gem = 0;
+#else
+	/* enable GEM by default */
+	dev_priv->has_gem = 1;
+#endif
+
 	i915_gem_load(dev);
 
 	/* Init HWS */
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index adc972cc..b3cc473 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -106,6 +106,8 @@
 typedef struct drm_i915_private {
 	struct drm_device *dev;
 
+	int has_gem;
+
 	void __iomem *regs;
 	drm_local_map_t *sarea;
 
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index ad672d8..24fe8c1 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -2309,7 +2309,14 @@
 	}
 
 	obj_priv = obj->driver_private;
-	args->busy = obj_priv->active;
+	/* Don't count being on the flushing list against the object being
+	 * done.  Otherwise, a buffer left on the flushing list but not getting
+	 * flushed (because nobody's flushing that domain) won't ever return
+	 * unbusy and get reused by libdrm's bo cache.  The other expected
+	 * consumer of this interface, OpenGL's occlusion queries, also specs
+	 * that the objects get unbusy "eventually" without any interference.
+	 */
+	args->busy = obj_priv->active && obj_priv->last_rendering_seqno != 0;
 
 	drm_gem_object_unreference(obj);
 	mutex_unlock(&dev->struct_mutex);
diff --git a/drivers/gpu/drm/radeon/radeon_irq.c b/drivers/gpu/drm/radeon/radeon_irq.c
index 99be114..8289e16 100644
--- a/drivers/gpu/drm/radeon/radeon_irq.c
+++ b/drivers/gpu/drm/radeon/radeon_irq.c
@@ -44,7 +44,7 @@
 	else
 		dev_priv->irq_enable_reg &= ~mask;
 
-	if (!dev->irq_enabled)
+	if (dev->irq_enabled)
 		RADEON_WRITE(RADEON_GEN_INT_CNTL, dev_priv->irq_enable_reg);
 }
 
@@ -57,7 +57,7 @@
 	else
 		dev_priv->r500_disp_irq_reg &= ~mask;
 
-	if (!dev->irq_enabled)
+	if (dev->irq_enabled)
 		RADEON_WRITE(R500_DxMODE_INT_MASK, dev_priv->r500_disp_irq_reg);
 }
 
diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c
index 228f757..3fcf78e 100644
--- a/drivers/i2c/busses/i2c-cpm.c
+++ b/drivers/i2c/busses/i2c-cpm.c
@@ -365,6 +365,7 @@
 		pmsg = &msgs[tptr];
 		if (pmsg->flags & I2C_M_RD)
 			ret = wait_event_interruptible_timeout(cpm->i2c_wait,
+				(in_be16(&tbdf[tptr].cbd_sc) & BD_SC_NAK) ||
 				!(in_be16(&rbdf[rptr].cbd_sc) & BD_SC_EMPTY),
 				1 * HZ);
 		else
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 1fac4e2..b7434d2 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -56,6 +56,7 @@
 struct s3c24xx_i2c {
 	spinlock_t		lock;
 	wait_queue_head_t	wait;
+	unsigned int		suspended:1;
 
 	struct i2c_msg		*msg;
 	unsigned int		msg_num;
@@ -507,7 +508,7 @@
 	unsigned long timeout;
 	int ret;
 
-	if (!(readl(i2c->regs + S3C2410_IICCON) & S3C2410_IICCON_IRQEN))
+	if (i2c->suspended)
 		return -EIO;
 
 	ret = s3c24xx_i2c_set_master(i2c);
@@ -986,17 +987,26 @@
 }
 
 #ifdef CONFIG_PM
+static int s3c24xx_i2c_suspend_late(struct platform_device *dev,
+				    pm_message_t msg)
+{
+	struct s3c24xx_i2c *i2c = platform_get_drvdata(dev);
+	i2c->suspended = 1;
+	return 0;
+}
+
 static int s3c24xx_i2c_resume(struct platform_device *dev)
 {
 	struct s3c24xx_i2c *i2c = platform_get_drvdata(dev);
 
-	if (i2c != NULL)
-		s3c24xx_i2c_init(i2c);
+	i2c->suspended = 0;
+	s3c24xx_i2c_init(i2c);
 
 	return 0;
 }
 
 #else
+#define s3c24xx_i2c_suspend_late NULL
 #define s3c24xx_i2c_resume NULL
 #endif
 
@@ -1005,6 +1015,7 @@
 static struct platform_driver s3c2410_i2c_driver = {
 	.probe		= s3c24xx_i2c_probe,
 	.remove		= s3c24xx_i2c_remove,
+	.suspend_late	= s3c24xx_i2c_suspend_late,
 	.resume		= s3c24xx_i2c_resume,
 	.driver		= {
 		.owner	= THIS_MODULE,
@@ -1015,6 +1026,7 @@
 static struct platform_driver s3c2440_i2c_driver = {
 	.probe		= s3c24xx_i2c_probe,
 	.remove		= s3c24xx_i2c_remove,
+	.suspend_late	= s3c24xx_i2c_suspend_late,
 	.resume		= s3c24xx_i2c_resume,
 	.driver		= {
 		.owner	= THIS_MODULE,
diff --git a/drivers/ide/cs5530.c b/drivers/ide/cs5530.c
index 53f079c..d8ede85 100644
--- a/drivers/ide/cs5530.c
+++ b/drivers/ide/cs5530.c
@@ -81,11 +81,12 @@
 {
 	ide_hwif_t *hwif = drive->hwif;
 	ide_drive_t *mate = ide_get_pair_dev(drive);
-	u16 *mateid = mate->id;
+	u16 *mateid;
 	u8 mask = hwif->ultra_mask;
 
 	if (mate == NULL)
 		goto out;
+	mateid = mate->id;
 
 	if (ata_id_has_dma(mateid) && __ide_dma_bad_drive(mate) == 0) {
 		if ((mateid[ATA_ID_FIELD_VALID] & 4) &&
diff --git a/drivers/ide/sc1200.c b/drivers/ide/sc1200.c
index f1a8758..ec7f766 100644
--- a/drivers/ide/sc1200.c
+++ b/drivers/ide/sc1200.c
@@ -104,11 +104,12 @@
 {
 	ide_hwif_t *hwif = drive->hwif;
 	ide_drive_t *mate = ide_get_pair_dev(drive);
-	u16 *mateid = mate->id;
+	u16 *mateid;
 	u8 mask = hwif->ultra_mask;
 
 	if (mate == NULL)
 		goto out;
+	mateid = mate->id;
 
 	if (ata_id_has_dma(mateid) && __ide_dma_bad_drive(mate) == 0) {
 		if ((mateid[ATA_ID_FIELD_VALID] & 4) &&
diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c
index d333ae2..79ef5fd 100644
--- a/drivers/ieee1394/nodemgr.c
+++ b/drivers/ieee1394/nodemgr.c
@@ -115,8 +115,14 @@
 	return error;
 }
 
+#define OUI_FREECOM_TECHNOLOGIES_GMBH 0x0001db
+
 static int nodemgr_get_max_rom(quadlet_t *bus_info_data, void *__ci)
 {
+	/* Freecom FireWire Hard Drive firmware bug */
+	if (be32_to_cpu(bus_info_data[3]) >> 8 == OUI_FREECOM_TECHNOLOGIES_GMBH)
+		return 0;
+
 	return (be32_to_cpu(bus_info_data[2]) >> 8) & 0x3;
 }
 
diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c
index ac89a5d..ab7c8e4 100644
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -208,16 +208,19 @@
  */
 
 /* IO operations when bitmap is stored near all superblocks */
-static struct page *read_sb_page(mddev_t *mddev, long offset, unsigned long index)
+static struct page *read_sb_page(mddev_t *mddev, long offset,
+				 struct page *page,
+				 unsigned long index, int size)
 {
 	/* choose a good rdev and read the page from there */
 
 	mdk_rdev_t *rdev;
 	struct list_head *tmp;
-	struct page *page = alloc_page(GFP_KERNEL);
 	sector_t target;
 
 	if (!page)
+		page = alloc_page(GFP_KERNEL);
+	if (!page)
 		return ERR_PTR(-ENOMEM);
 
 	rdev_for_each(rdev, tmp, mddev) {
@@ -227,7 +230,9 @@
 
 		target = rdev->sb_start + offset + index * (PAGE_SIZE/512);
 
-		if (sync_page_io(rdev->bdev, target, PAGE_SIZE, page, READ)) {
+		if (sync_page_io(rdev->bdev, target,
+				 roundup(size, bdev_hardsect_size(rdev->bdev)),
+				 page, READ)) {
 			page->index = index;
 			attach_page_buffers(page, NULL); /* so that free_buffer will
 							  * quietly no-op */
@@ -544,7 +549,9 @@
 
 		bitmap->sb_page = read_page(bitmap->file, 0, bitmap, bytes);
 	} else {
-		bitmap->sb_page = read_sb_page(bitmap->mddev, bitmap->offset, 0);
+		bitmap->sb_page = read_sb_page(bitmap->mddev, bitmap->offset,
+					       NULL,
+					       0, sizeof(bitmap_super_t));
 	}
 	if (IS_ERR(bitmap->sb_page)) {
 		err = PTR_ERR(bitmap->sb_page);
@@ -957,11 +964,16 @@
 				 */
 				page = bitmap->sb_page;
 				offset = sizeof(bitmap_super_t);
+				read_sb_page(bitmap->mddev, bitmap->offset,
+					     page,
+					     index, count);
 			} else if (file) {
 				page = read_page(file, index, bitmap, count);
 				offset = 0;
 			} else {
-				page = read_sb_page(bitmap->mddev, bitmap->offset, index);
+				page = read_sb_page(bitmap->mddev, bitmap->offset,
+						    NULL,
+						    index, count);
 				offset = 0;
 			}
 			if (IS_ERR(page)) { /* read error */
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index d62fd4f..ee09041 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -2008,6 +2008,9 @@
 		return FAILED;
 	}
 
+	/* make sure we have no outstanding commands at this stage */
+	mptscsih_flush_running_cmds(hd);
+
 	ioc = hd->ioc;
 	printk(MYIOC_s_INFO_FMT "attempting host reset! (sc=%p)\n",
 	    ioc->name, SCpnt);
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index a1a3d0e..9e8222f 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -543,9 +543,9 @@
 		for (j = 0; j < bp->rx_max_pg_ring; j++) {
 			if (rxr->rx_pg_desc_ring[j])
 				pci_free_consistent(bp->pdev, RXBD_RING_SIZE,
-						    rxr->rx_pg_desc_ring[i],
-						    rxr->rx_pg_desc_mapping[i]);
-			rxr->rx_pg_desc_ring[i] = NULL;
+						    rxr->rx_pg_desc_ring[j],
+						    rxr->rx_pg_desc_mapping[j]);
+			rxr->rx_pg_desc_ring[j] = NULL;
 		}
 		if (rxr->rx_pg_ring)
 			vfree(rxr->rx_pg_ring);
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 523b971..d115a6d3 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -1893,12 +1893,17 @@
 		ctrl |= E1000_CTRL_PHY_RST;
 	}
 	ret_val = e1000_acquire_swflag_ich8lan(hw);
+	/* Whether or not the swflag was acquired, we need to reset the part */
 	hw_dbg(hw, "Issuing a global reset to ich8lan");
 	ew32(CTRL, (ctrl | E1000_CTRL_RST));
 	msleep(20);
 
-	/* release the swflag because it is not reset by hardware reset */
-	e1000_release_swflag_ich8lan(hw);
+	if (!ret_val) {
+		/* release the swflag because it is not reset by
+		 * hardware reset
+		 */
+		e1000_release_swflag_ich8lan(hw);
+	}
 
 	ret_val = e1000e_get_auto_rd_done(hw);
 	if (ret_val) {
diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c
index c414554..36cb6e9 100644
--- a/drivers/net/enc28j60.c
+++ b/drivers/net/enc28j60.c
@@ -959,7 +959,7 @@
 			ndev->stats.rx_packets++;
 			ndev->stats.rx_bytes += len;
 			ndev->last_rx = jiffies;
-			netif_rx(skb);
+			netif_rx_ni(skb);
 		}
 	}
 	/*
diff --git a/drivers/net/jme.h b/drivers/net/jme.h
index f863aee..3f5d915 100644
--- a/drivers/net/jme.h
+++ b/drivers/net/jme.h
@@ -22,7 +22,7 @@
  */
 
 #ifndef __JME_H_INCLUDED__
-#define __JME_H_INCLUDEE__
+#define __JME_H_INCLUDED__
 
 #define DRV_NAME	"jme"
 #define DRV_VERSION	"1.0.3"
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 536bda1..289fc26 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -105,8 +105,6 @@
 		return -EINVAL;
 	}
 
-	bus->state = MDIOBUS_REGISTERED;
-
 	mutex_init(&bus->mdio_lock);
 
 	if (bus->reset)
@@ -123,6 +121,9 @@
 		}
 	}
 
+	if (!err)
+		bus->state = MDIOBUS_REGISTERED;
+
 	pr_info("%s: probed\n", bus->name);
 
 	return err;
diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c
index 7e857e9..714a230 100644
--- a/drivers/net/ppp_generic.c
+++ b/drivers/net/ppp_generic.c
@@ -116,6 +116,7 @@
 	unsigned long	last_xmit;	/* jiffies when last pkt sent 9c */
 	unsigned long	last_recv;	/* jiffies when last pkt rcvd a0 */
 	struct net_device *dev;		/* network interface device a4 */
+	int		closing;	/* is device closing down? a8 */
 #ifdef CONFIG_PPP_MULTILINK
 	int		nxchan;		/* next channel to send something on */
 	u32		nxseq;		/* next sequence number to send */
@@ -995,7 +996,7 @@
 	struct sk_buff *skb;
 
 	ppp_xmit_lock(ppp);
-	if (ppp->dev) {
+	if (!ppp->closing) {
 		ppp_push(ppp);
 		while (!ppp->xmit_pending
 		       && (skb = skb_dequeue(&ppp->file.xq)))
@@ -1463,8 +1464,7 @@
 ppp_do_recv(struct ppp *ppp, struct sk_buff *skb, struct channel *pch)
 {
 	ppp_recv_lock(ppp);
-	/* ppp->dev == 0 means interface is closing down */
-	if (ppp->dev)
+	if (!ppp->closing)
 		ppp_receive_frame(ppp, skb, pch);
 	else
 		kfree_skb(skb);
@@ -2498,18 +2498,16 @@
  */
 static void ppp_shutdown_interface(struct ppp *ppp)
 {
-	struct net_device *dev;
-
 	mutex_lock(&all_ppp_mutex);
-	ppp_lock(ppp);
-	dev = ppp->dev;
-	ppp->dev = NULL;
-	ppp_unlock(ppp);
 	/* This will call dev_close() for us. */
-	if (dev) {
-		unregister_netdev(dev);
-		free_netdev(dev);
-	}
+	ppp_lock(ppp);
+	if (!ppp->closing) {
+		ppp->closing = 1;
+		ppp_unlock(ppp);
+		unregister_netdev(ppp->dev);
+	} else
+		ppp_unlock(ppp);
+
 	cardmap_set(&all_ppp_units, ppp->file.index, NULL);
 	ppp->file.dead = 1;
 	ppp->owner = NULL;
@@ -2554,7 +2552,7 @@
 	if (ppp->xmit_pending)
 		kfree_skb(ppp->xmit_pending);
 
-	kfree(ppp);
+	free_netdev(ppp->dev);
 }
 
 /*
@@ -2616,7 +2614,7 @@
 	if (pch->file.hdrlen > ppp->file.hdrlen)
 		ppp->file.hdrlen = pch->file.hdrlen;
 	hdrlen = pch->file.hdrlen + 2;	/* for protocol bytes */
-	if (ppp->dev && hdrlen > ppp->dev->hard_header_len)
+	if (hdrlen > ppp->dev->hard_header_len)
 		ppp->dev->hard_header_len = hdrlen;
 	list_add_tail(&pch->clist, &ppp->channels);
 	++ppp->n_channels;
diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c
index 1d2ef8f..5a40f2d 100644
--- a/drivers/net/starfire.c
+++ b/drivers/net/starfire.c
@@ -1509,6 +1509,11 @@
 		desc->status = 0;
 		np->rx_done = (np->rx_done + 1) % DONE_Q_SIZE;
 	}
+
+	if (*quota == 0) {	/* out of rx quota */
+		retcode = 1;
+		goto out;
+	}
 	writew(np->rx_done, np->base + CompletionQConsumerIdx);
 
  out:
diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c
index 1349e41..fed7eba 100644
--- a/drivers/net/sungem.c
+++ b/drivers/net/sungem.c
@@ -1142,6 +1142,70 @@
 	return NETDEV_TX_OK;
 }
 
+static void gem_pcs_reset(struct gem *gp)
+{
+	int limit;
+	u32 val;
+
+	/* Reset PCS unit. */
+	val = readl(gp->regs + PCS_MIICTRL);
+	val |= PCS_MIICTRL_RST;
+	writel(val, gp->regs + PCS_MIICTRL);
+
+	limit = 32;
+	while (readl(gp->regs + PCS_MIICTRL) & PCS_MIICTRL_RST) {
+		udelay(100);
+		if (limit-- <= 0)
+			break;
+	}
+	if (limit <= 0)
+		printk(KERN_WARNING "%s: PCS reset bit would not clear.\n",
+		       gp->dev->name);
+}
+
+static void gem_pcs_reinit_adv(struct gem *gp)
+{
+	u32 val;
+
+	/* Make sure PCS is disabled while changing advertisement
+	 * configuration.
+	 */
+	val = readl(gp->regs + PCS_CFG);
+	val &= ~(PCS_CFG_ENABLE | PCS_CFG_TO);
+	writel(val, gp->regs + PCS_CFG);
+
+	/* Advertise all capabilities except assymetric
+	 * pause.
+	 */
+	val = readl(gp->regs + PCS_MIIADV);
+	val |= (PCS_MIIADV_FD | PCS_MIIADV_HD |
+		PCS_MIIADV_SP | PCS_MIIADV_AP);
+	writel(val, gp->regs + PCS_MIIADV);
+
+	/* Enable and restart auto-negotiation, disable wrapback/loopback,
+	 * and re-enable PCS.
+	 */
+	val = readl(gp->regs + PCS_MIICTRL);
+	val |= (PCS_MIICTRL_RAN | PCS_MIICTRL_ANE);
+	val &= ~PCS_MIICTRL_WB;
+	writel(val, gp->regs + PCS_MIICTRL);
+
+	val = readl(gp->regs + PCS_CFG);
+	val |= PCS_CFG_ENABLE;
+	writel(val, gp->regs + PCS_CFG);
+
+	/* Make sure serialink loopback is off.  The meaning
+	 * of this bit is logically inverted based upon whether
+	 * you are in Serialink or SERDES mode.
+	 */
+	val = readl(gp->regs + PCS_SCTRL);
+	if (gp->phy_type == phy_serialink)
+		val &= ~PCS_SCTRL_LOOP;
+	else
+		val |= PCS_SCTRL_LOOP;
+	writel(val, gp->regs + PCS_SCTRL);
+}
+
 #define STOP_TRIES 32
 
 /* Must be invoked under gp->lock and gp->tx_lock. */
@@ -1168,6 +1232,9 @@
 
 	if (limit <= 0)
 		printk(KERN_ERR "%s: SW reset is ghetto.\n", gp->dev->name);
+
+	if (gp->phy_type == phy_serialink || gp->phy_type == phy_serdes)
+		gem_pcs_reinit_adv(gp);
 }
 
 /* Must be invoked under gp->lock and gp->tx_lock. */
@@ -1324,7 +1391,7 @@
 	    	   gp->phy_type == phy_serdes) {
 		u32 pcs_lpa = readl(gp->regs + PCS_MIILP);
 
-		if (pcs_lpa & PCS_MIIADV_FD)
+		if ((pcs_lpa & PCS_MIIADV_FD) || gp->phy_type == phy_serdes)
 			full_duplex = 1;
 		speed = SPEED_1000;
 	}
@@ -1488,6 +1555,9 @@
 			val = readl(gp->regs + PCS_MIISTAT);
 
 		if ((val & PCS_MIISTAT_LS) != 0) {
+			if (gp->lstate == link_up)
+				goto restart;
+
 			gp->lstate = link_up;
 			netif_carrier_on(gp->dev);
 			(void)gem_set_link_modes(gp);
@@ -1708,61 +1778,8 @@
 		if (gp->phy_mii.def && gp->phy_mii.def->ops->init)
 			gp->phy_mii.def->ops->init(&gp->phy_mii);
 	} else {
-		u32 val;
-		int limit;
-
-		/* Reset PCS unit. */
-		val = readl(gp->regs + PCS_MIICTRL);
-		val |= PCS_MIICTRL_RST;
-		writel(val, gp->regs + PCS_MIICTRL);
-
-		limit = 32;
-		while (readl(gp->regs + PCS_MIICTRL) & PCS_MIICTRL_RST) {
-			udelay(100);
-			if (limit-- <= 0)
-				break;
-		}
-		if (limit <= 0)
-			printk(KERN_WARNING "%s: PCS reset bit would not clear.\n",
-			       gp->dev->name);
-
-		/* Make sure PCS is disabled while changing advertisement
-		 * configuration.
-		 */
-		val = readl(gp->regs + PCS_CFG);
-		val &= ~(PCS_CFG_ENABLE | PCS_CFG_TO);
-		writel(val, gp->regs + PCS_CFG);
-
-		/* Advertise all capabilities except assymetric
-		 * pause.
-		 */
-		val = readl(gp->regs + PCS_MIIADV);
-		val |= (PCS_MIIADV_FD | PCS_MIIADV_HD |
-			PCS_MIIADV_SP | PCS_MIIADV_AP);
-		writel(val, gp->regs + PCS_MIIADV);
-
-		/* Enable and restart auto-negotiation, disable wrapback/loopback,
-		 * and re-enable PCS.
-		 */
-		val = readl(gp->regs + PCS_MIICTRL);
-		val |= (PCS_MIICTRL_RAN | PCS_MIICTRL_ANE);
-		val &= ~PCS_MIICTRL_WB;
-		writel(val, gp->regs + PCS_MIICTRL);
-
-		val = readl(gp->regs + PCS_CFG);
-		val |= PCS_CFG_ENABLE;
-		writel(val, gp->regs + PCS_CFG);
-
-		/* Make sure serialink loopback is off.  The meaning
-		 * of this bit is logically inverted based upon whether
-		 * you are in Serialink or SERDES mode.
-		 */
-		val = readl(gp->regs + PCS_SCTRL);
-		if (gp->phy_type == phy_serialink)
-			val &= ~PCS_SCTRL_LOOP;
-		else
-			val |= PCS_SCTRL_LOOP;
-		writel(val, gp->regs + PCS_SCTRL);
+		gem_pcs_reset(gp);
+		gem_pcs_reinit_adv(gp);
 	}
 
 	/* Default aneg parameters */
@@ -2680,6 +2697,21 @@
 		cmd->speed = 0;
 		cmd->duplex = cmd->port = cmd->phy_address =
 			cmd->transceiver = cmd->autoneg = 0;
+
+		/* serdes means usually a Fibre connector, with most fixed */
+		if (gp->phy_type == phy_serdes) {
+			cmd->port = PORT_FIBRE;
+			cmd->supported = (SUPPORTED_1000baseT_Half |
+				SUPPORTED_1000baseT_Full |
+				SUPPORTED_FIBRE | SUPPORTED_Autoneg |
+				SUPPORTED_Pause | SUPPORTED_Asym_Pause);
+			cmd->advertising = cmd->supported;
+			cmd->transceiver = XCVR_INTERNAL;
+			if (gp->lstate == link_up)
+				cmd->speed = SPEED_1000;
+			cmd->duplex = DUPLEX_FULL;
+			cmd->autoneg = 1;
+		}
 	}
 	cmd->maxtxpkt = cmd->maxrxpkt = 0;
 
diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c
index c41d687..e604982 100644
--- a/drivers/net/tlan.c
+++ b/drivers/net/tlan.c
@@ -1098,6 +1098,7 @@
 	dma_addr_t	tail_list_phys;
 	u8		*tail_buffer;
 	unsigned long	flags;
+	unsigned int    txlen;
 
 	if ( ! priv->phyOnline ) {
 		TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT:  %s PHY is not ready\n",
@@ -1108,6 +1109,7 @@
 
 	if (skb_padto(skb, TLAN_MIN_FRAME_SIZE))
 		return 0;
+	txlen = max(skb->len, (unsigned int)TLAN_MIN_FRAME_SIZE);
 
 	tail_list = priv->txList + priv->txTail;
 	tail_list_phys = priv->txListDMA + sizeof(TLanList) * priv->txTail;
@@ -1125,16 +1127,16 @@
 
 	if ( bbuf ) {
 		tail_buffer = priv->txBuffer + ( priv->txTail * TLAN_MAX_FRAME_SIZE );
-		skb_copy_from_linear_data(skb, tail_buffer, skb->len);
+		skb_copy_from_linear_data(skb, tail_buffer, txlen);
 	} else {
 		tail_list->buffer[0].address = pci_map_single(priv->pciDev,
-							      skb->data, skb->len,
+							      skb->data, txlen,
 							      PCI_DMA_TODEVICE);
 		TLan_StoreSKB(tail_list, skb);
 	}
 
-	tail_list->frameSize = (u16) skb->len;
-	tail_list->buffer[0].count = TLAN_LAST_BUFFER | (u32) skb->len;
+	tail_list->frameSize = (u16) txlen;
+	tail_list->buffer[0].count = TLAN_LAST_BUFFER | (u32) txlen;
 	tail_list->buffer[1].count = 0;
 	tail_list->buffer[1].address = 0;
 
@@ -1431,7 +1433,9 @@
 		if ( ! bbuf ) {
 			struct sk_buff *skb = TLan_GetSKB(head_list);
 			pci_unmap_single(priv->pciDev, head_list->buffer[0].address,
-					 skb->len, PCI_DMA_TODEVICE);
+					 max(skb->len,
+					     (unsigned int)TLAN_MIN_FRAME_SIZE),
+					 PCI_DMA_TODEVICE);
 			dev_kfree_skb_any(skb);
 			head_list->buffer[8].address = 0;
 			head_list->buffer[9].address = 0;
@@ -2055,9 +2059,12 @@
 			list = priv->txList + i;
 			skb = TLan_GetSKB(list);
 			if ( skb ) {
-				pci_unmap_single(priv->pciDev,
-						 list->buffer[0].address, skb->len,
-						 PCI_DMA_TODEVICE);
+				pci_unmap_single(
+					priv->pciDev,
+					list->buffer[0].address,
+					max(skb->len,
+					    (unsigned int)TLAN_MIN_FRAME_SIZE),
+					PCI_DMA_TODEVICE);
 				dev_kfree_skb_any( skb );
 				list->buffer[8].address = 0;
 				list->buffer[9].address = 0;
diff --git a/drivers/pci/hotplug/acpiphp.h b/drivers/pci/hotplug/acpiphp.h
index f9e244d..9bcb6cb 100644
--- a/drivers/pci/hotplug/acpiphp.h
+++ b/drivers/pci/hotplug/acpiphp.h
@@ -113,7 +113,7 @@
 
 	u8		device;		/* pci device# */
 
-	u32		sun;		/* ACPI _SUN (slot unique number) */
+	unsigned long long sun;		/* ACPI _SUN (slot unique number) */
 	u32		flags;		/* see below */
 };
 
diff --git a/drivers/pci/hotplug/acpiphp_core.c b/drivers/pci/hotplug/acpiphp_core.c
index 95b536a..43c10bd 100644
--- a/drivers/pci/hotplug/acpiphp_core.c
+++ b/drivers/pci/hotplug/acpiphp_core.c
@@ -337,7 +337,7 @@
 	slot->hotplug_slot->info->cur_bus_speed = PCI_SPEED_UNKNOWN;
 
 	acpiphp_slot->slot = slot;
-	snprintf(name, SLOT_NAME_SIZE, "%u", slot->acpi_slot->sun);
+	snprintf(name, SLOT_NAME_SIZE, "%llu", slot->acpi_slot->sun);
 
 	retval = pci_hp_register(slot->hotplug_slot,
 					acpiphp_slot->bridge->pci_bus,
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 955aae4..3affc64 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -255,13 +255,13 @@
 
 		bridge->nr_slots++;
 
-		dbg("found ACPI PCI Hotplug slot %d at PCI %04x:%02x:%02x\n",
+		dbg("found ACPI PCI Hotplug slot %llu at PCI %04x:%02x:%02x\n",
 				slot->sun, pci_domain_nr(bridge->pci_bus),
 				bridge->pci_bus->number, slot->device);
 		retval = acpiphp_register_hotplug_slot(slot);
 		if (retval) {
 			if (retval == -EBUSY)
-				warn("Slot %d already registered by another "
+				warn("Slot %llu already registered by another "
 					"hotplug driver\n", slot->sun);
 			else
 				warn("acpiphp_register_hotplug_slot failed "
diff --git a/drivers/pci/hotplug/ibmphp_core.c b/drivers/pci/hotplug/ibmphp_core.c
index c892daa..633e743 100644
--- a/drivers/pci/hotplug/ibmphp_core.c
+++ b/drivers/pci/hotplug/ibmphp_core.c
@@ -1402,10 +1402,6 @@
 		goto error;
 	}
 
-	/* lock ourselves into memory with a module 
-	 * count of -1 so that no one can unload us. */
-	module_put(THIS_MODULE);
-
 exit:
 	return rc;
 
@@ -1423,4 +1419,3 @@
 }
 
 module_init(ibmphp_init);
-module_exit(ibmphp_exit);
diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index 4b23bc3..39cf248 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -432,18 +432,19 @@
 		goto err_out_release_ctlr;
 	}
 
+	/* Check if slot is occupied */
 	t_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset);
-
-	t_slot->hpc_ops->get_adapter_status(t_slot, &value); /* Check if slot is occupied */
-	if (value && pciehp_force) {
-		rc = pciehp_enable_slot(t_slot);
-		if (rc)	/* -ENODEV: shouldn't happen, but deal with it */
-			value = 0;
-	}
-	if ((POWER_CTRL(ctrl)) && !value) {
-		rc = t_slot->hpc_ops->power_off_slot(t_slot); /* Power off slot if not occupied*/
-		if (rc)
-			goto err_out_free_ctrl_slot;
+	t_slot->hpc_ops->get_adapter_status(t_slot, &value);
+	if (value) {
+		if (pciehp_force)
+			pciehp_enable_slot(t_slot);
+	} else {
+		/* Power off slot if not occupied */
+		if (POWER_CTRL(ctrl)) {
+			rc = t_slot->hpc_ops->power_off_slot(t_slot);
+			if (rc)
+				goto err_out_free_ctrl_slot;
+		}
 	}
 
 	return 0;
diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c
index dfc63d0..aac7006 100644
--- a/drivers/pci/pcie/aer/aerdrv_core.c
+++ b/drivers/pci/pcie/aer/aerdrv_core.c
@@ -252,7 +252,7 @@
 
 	if (!dev->driver ||
 		!dev->driver->err_handler ||
-		!dev->driver->err_handler->slot_reset)
+		!dev->driver->err_handler->resume)
 		return;
 
 	err_handler = dev->driver->err_handler;
diff --git a/drivers/pcmcia/bfin_cf_pcmcia.c b/drivers/pcmcia/bfin_cf_pcmcia.c
index bb733886..b59d411 100644
--- a/drivers/pcmcia/bfin_cf_pcmcia.c
+++ b/drivers/pcmcia/bfin_cf_pcmcia.c
@@ -334,6 +334,6 @@
 module_init(bfin_cf_init);
 module_exit(bfin_cf_exit);
 
-MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>")
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
 MODULE_DESCRIPTION("BFIN CF/PCMCIA Driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/rtc/rtc-isl1208.c b/drivers/rtc/rtc-isl1208.c
index 2cd77ab..054e052 100644
--- a/drivers/rtc/rtc-isl1208.c
+++ b/drivers/rtc/rtc-isl1208.c
@@ -328,6 +328,13 @@
 	int sr;
 	u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
 
+	/* The clock has an 8 bit wide bcd-coded register (they never learn)
+	 * for the year. tm_year is an offset from 1900 and we are interested
+	 * in the 2000-2099 range, so any value less than 100 is invalid.
+	 */
+	if (tm->tm_year < 100)
+		return -EINVAL;
+
 	regs[ISL1208_REG_SC] = bin2bcd(tm->tm_sec);
 	regs[ISL1208_REG_MN] = bin2bcd(tm->tm_min);
 	regs[ISL1208_REG_HR] = bin2bcd(tm->tm_hour) | ISL1208_REG_HR_MIL;
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 162cd92..94acbee 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -175,8 +175,8 @@
 	{ aac_rx_init, "percraid", "DELL    ", "PERCRAID        ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 3/Di (Boxster/PERC3DiB) */
 	{ aac_rx_init, "aacraid",  "ADAPTEC ", "catapult        ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* catapult */
 	{ aac_rx_init, "aacraid",  "ADAPTEC ", "tomcat          ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* tomcat */
-	{ aac_rx_init, "aacraid",  "ADAPTEC ", "Adaptec 2120S   ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2120S (Crusader) */
-	{ aac_rx_init, "aacraid",  "ADAPTEC ", "Adaptec 2200S   ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2200S (Vulcan) */
+	{ aac_rx_init, "aacraid",  "ADAPTEC ", "Adaptec 2120S   ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG },		      /* Adaptec 2120S (Crusader) */
+	{ aac_rx_init, "aacraid",  "ADAPTEC ", "Adaptec 2200S   ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG },		      /* Adaptec 2200S (Vulcan) */
 	{ aac_rx_init, "aacraid",  "ADAPTEC ", "Adaptec 2200S   ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2200S (Vulcan-2m) */
 	{ aac_rx_init, "aacraid",  "Legend  ", "Legend S220     ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Legend S220 (Legend Crusader) */
 	{ aac_rx_init, "aacraid",  "Legend  ", "Legend S230     ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Legend S230 (Legend Vulcan) */
diff --git a/drivers/scsi/ibmvscsi/ibmvstgt.c b/drivers/scsi/ibmvscsi/ibmvstgt.c
index 2a5b29d..e2dd6a4 100644
--- a/drivers/scsi/ibmvscsi/ibmvstgt.c
+++ b/drivers/scsi/ibmvscsi/ibmvstgt.c
@@ -864,21 +864,23 @@
 
 	INIT_WORK(&vport->crq_work, handle_crq);
 
-	err = crq_queue_create(&vport->crq_queue, target);
+	err = scsi_add_host(shost, target->dev);
 	if (err)
 		goto free_srp_target;
 
-	err = scsi_add_host(shost, target->dev);
-	if (err)
-		goto destroy_queue;
-
 	err = scsi_tgt_alloc_queue(shost);
 	if (err)
-		goto destroy_queue;
+		goto remove_host;
+
+	err = crq_queue_create(&vport->crq_queue, target);
+	if (err)
+		goto free_queue;
 
 	return 0;
-destroy_queue:
-	crq_queue_destroy(target);
+free_queue:
+	scsi_tgt_free_queue(shost);
+remove_host:
+	scsi_remove_host(shost);
 free_srp_target:
 	srp_target_free(target);
 put_host:
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 801c7cf..3fdee73 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -489,12 +489,6 @@
 		if (!__kfifo_get(session->cmdpool.queue,
 				 (void*)&task, sizeof(void*)))
 			return NULL;
-
-		if ((hdr->opcode == (ISCSI_OP_NOOP_OUT | ISCSI_OP_IMMEDIATE)) &&
-		     hdr->ttt == RESERVED_ITT) {
-			conn->ping_task = task;
-			conn->last_ping = jiffies;
-		}
 	}
 	/*
 	 * released in complete pdu for task we expect a response for, and
@@ -703,6 +697,11 @@
 	task = __iscsi_conn_send_pdu(conn, (struct iscsi_hdr *)&hdr, NULL, 0);
 	if (!task)
 		iscsi_conn_printk(KERN_ERR, conn, "Could not send nopout\n");
+	else if (!rhdr) {
+		/* only track our nops */
+		conn->ping_task = task;
+		conn->last_ping = jiffies;
+	}
 }
 
 static int iscsi_handle_reject(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index fa45a1a6..148d3af 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -648,8 +648,8 @@
 	struct request *req = cmd->request;
 	unsigned long flags;
 
-	scsi_unprep_request(req);
 	spin_lock_irqsave(q->queue_lock, flags);
+	scsi_unprep_request(req);
 	blk_requeue_request(q, req);
 	spin_unlock_irqrestore(q->queue_lock, flags);
 
diff --git a/drivers/sh/maple/maple.c b/drivers/sh/maple/maple.c
index d1812d3..63f0de2 100644
--- a/drivers/sh/maple/maple.c
+++ b/drivers/sh/maple/maple.c
@@ -827,7 +827,7 @@
 
 	maple_queue_cache =
 	    kmem_cache_create("maple_queue_cache", 0x400, 0,
-			      SLAB_POISON|SLAB_HWCACHE_ALIGN, NULL);
+			      SLAB_HWCACHE_ALIGN, NULL);
 
 	if (!maple_queue_cache)
 		goto cleanup_bothirqs;
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index c95b286..5d457c9 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -22,6 +22,8 @@
 	  If in doubt, say N here.
 
 
+if STAGING
+
 config STAGING_EXCLUDE_BUILD
 	bool "Exclude Staging drivers from being built" if STAGING
 	default y
@@ -62,3 +64,4 @@
 source "drivers/staging/poch/Kconfig"
 
 endif # !STAGING_EXCLUDE_BUILD
+endif # STAGING
diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c
index 8e74657..43a863c 100644
--- a/drivers/usb/class/usbtmc.c
+++ b/drivers/usb/class/usbtmc.c
@@ -51,6 +51,7 @@
 	{ USB_INTERFACE_INFO(USB_CLASS_APP_SPEC, 3, 0), },
 	{ 0, } /* terminating entry */
 };
+MODULE_DEVICE_TABLE(usb, usbtmc_devices);
 
 /*
  * This structure is the capabilities for the device
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 3d7793d..8c08130 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -279,7 +279,9 @@
 	 * altsetting means creating new endpoint device entries).
 	 * When either of these happens, defer the Set-Interface.
 	 */
-	if (!error && intf->dev.power.status == DPM_ON)
+	if (intf->cur_altsetting->desc.bAlternateSetting == 0)
+		;	/* Already in altsetting 0 so skip Set-Interface */
+	else if (!error && intf->dev.power.status == DPM_ON)
 		usb_set_interface(udev, intf->altsetting[0].
 				desc.bInterfaceNumber, 0);
 	else
diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c
index 428b599..3a8bb53 100644
--- a/drivers/usb/gadget/f_rndis.c
+++ b/drivers/usb/gadget/f_rndis.c
@@ -651,6 +651,8 @@
 				fs_in_desc.bEndpointAddress;
 		hs_out_desc.bEndpointAddress =
 				fs_out_desc.bEndpointAddress;
+		hs_notify_desc.bEndpointAddress =
+				fs_notify_desc.bEndpointAddress;
 
 		/* copy descriptors, and track endpoint copies */
 		f->hs_descriptors = usb_copy_descriptors(eth_hs_function);
@@ -662,6 +664,8 @@
 				f->hs_descriptors, &hs_in_desc);
 		rndis->hs.out = usb_find_endpoint(eth_hs_function,
 				f->hs_descriptors, &hs_out_desc);
+		rndis->hs.notify = usb_find_endpoint(eth_hs_function,
+				f->hs_descriptors, &hs_notify_desc);
 	}
 
 	rndis->port.open = rndis_open;
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index aad1359..fb6f293 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -143,6 +143,7 @@
 static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) },
@@ -166,6 +167,7 @@
 	{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) },
 	{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) },
 	{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_SPROG_II) },
 	{ USB_DEVICE(FTDI_VID, FTDI_XF_632_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_XF_634_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_XF_547_PID) },
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 07a3992..373ee09 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -40,6 +40,9 @@
 /* AlphaMicro Components AMC-232USB01 device */
 #define FTDI_AMC232_PID 0xFF00 /* Product Id */
 
+/* www.candapter.com Ewert Energy Systems CANdapter device */
+#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */
+
 /* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */
 /* the VID is the standard ftdi vid (FTDI_VID) */
 #define FTDI_SCS_DEVICE_0_PID 0xD010    /* SCS PTC-IIusb */
@@ -75,6 +78,9 @@
 /* OpenDCC (www.opendcc.de) product id */
 #define FTDI_OPENDCC_PID	0xBFD8
 
+/* Sprog II (Andrew Crosland's SprogII DCC interface) */
+#define FTDI_SPROG_II		0xF0C8
+
 /* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */
 /* they use the ftdi chipset for the USB interface and the vendor id is the same */
 #define FTDI_XF_632_PID 0xFC08	/* 632: 16x2 Character Display */
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 491c885..1aed584 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -91,6 +91,8 @@
 	{ USB_DEVICE(WS002IN_VENDOR_ID, WS002IN_PRODUCT_ID) },
 	{ USB_DEVICE(COREGA_VENDOR_ID, COREGA_PRODUCT_ID) },
 	{ USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) },
+	{ USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) },
+	{ USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
 
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index a3bd039..54974f4 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -110,3 +110,11 @@
 /* Y.C. Cable U.S.A., Inc - USB to RS-232 */
 #define YCCABLE_VENDOR_ID	0x05ad
 #define YCCABLE_PRODUCT_ID	0x0fba
+
+/* "Superial" USB - Serial */
+#define SUPERIAL_VENDOR_ID	0x5372
+#define SUPERIAL_PRODUCT_ID	0x2303
+
+/* Hewlett-Packard LD220-HP POS Pole Display */
+#define HP_VENDOR_ID		0x03f0
+#define HP_LD220_PRODUCT_ID	0x3524
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 31c42d1..01d0c70 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -16,56 +16,6 @@
  * For questions or problems with this driver, contact Texas Instruments
  * technical support, or Al Borchers <alborchers@steinerpoint.com>, or
  * Peter Berger <pberger@brimson.com>.
- *
- * This driver needs this hotplug script in /etc/hotplug/usb/ti_usb_3410_5052
- * or in /etc/hotplug.d/usb/ti_usb_3410_5052.hotplug to set the device
- * configuration.
- *
- * #!/bin/bash
- *
- * BOOT_CONFIG=1
- * ACTIVE_CONFIG=2
- *
- * if [[ "$ACTION" != "add" ]]
- * then
- * 	exit
- * fi
- *
- * CONFIG_PATH=/sys${DEVPATH%/?*}/bConfigurationValue
- *
- * if [[ 0`cat $CONFIG_PATH` -ne $BOOT_CONFIG ]]
- * then
- * 	exit
- * fi
- *
- * PRODUCT=${PRODUCT%/?*}		# delete version
- * VENDOR_ID=`printf "%d" 0x${PRODUCT%/?*}`
- * PRODUCT_ID=`printf "%d" 0x${PRODUCT#*?/}`
- *
- * PARAM_PATH=/sys/module/ti_usb_3410_5052/parameters
- *
- * function scan() {
- * 	s=$1
- * 	shift
- * 	for i
- * 	do
- * 		if [[ $s -eq $i ]]
- * 		then
- * 			return 0
- * 		fi
- * 	done
- * 	return 1
- * }
- *
- * IFS=$IFS,
- *
- * if (scan $VENDOR_ID 1105 `cat $PARAM_PATH/vendor_3410` &&
- * scan $PRODUCT_ID 13328 `cat $PARAM_PATH/product_3410`) ||
- * (scan $VENDOR_ID 1105 `cat $PARAM_PATH/vendor_5052` &&
- * scan $PRODUCT_ID 20562 20818 20570 20575 `cat $PARAM_PATH/product_5052`)
- * then
- * 	echo $ACTIVE_CONFIG > $CONFIG_PATH
- * fi
  */
 
 #include <linux/kernel.h>
@@ -457,9 +407,10 @@
 		goto free_tdev;
 	}
 
-	/* the second configuration must be set (in sysfs by hotplug script) */
+	/* the second configuration must be set */
 	if (dev->actconfig->desc.bConfigurationValue == TI_BOOT_CONFIG) {
-		status = -ENODEV;
+		status = usb_driver_set_configuration(dev, TI_ACTIVE_CONFIG);
+		status = status ? status : -ENODEV;
 		goto free_tdev;
 	}
 
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index e61f2bf..bfcc1fe 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -167,8 +167,22 @@
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY ),
 
+/* Reported by Ozan Sener <themgzzy@gmail.com> */
+UNUSUAL_DEV(  0x0421, 0x0060, 0x0551, 0x0551,
+		"Nokia",
+		"3500c",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY ),
+
+/* Reported by CSECSY Laszlo <boobaa@frugalware.org> */
+UNUSUAL_DEV(  0x0421, 0x0063, 0x0001, 0x0601,
+		"Nokia",
+		"Nokia 3109c",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY ),
+
 /* Patch for Nokia 5310 capacity */
-UNUSUAL_DEV(  0x0421, 0x006a, 0x0000, 0x0591,
+UNUSUAL_DEV(  0x0421, 0x006a, 0x0000, 0x0701,
 		"Nokia",
 		"5310",
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
diff --git a/drivers/w1/w1_io.c b/drivers/w1/w1_io.c
index 0d15b0e..5139c25 100644
--- a/drivers/w1/w1_io.c
+++ b/drivers/w1/w1_io.c
@@ -356,7 +356,9 @@
 		w1_write_8(sl->master, W1_SKIP_ROM);
 	else {
 		u8 match[9] = {W1_MATCH_ROM, };
-		memcpy(&match[1], (u8 *)&sl->reg_num, 8);
+		u64 rn = le64_to_cpu(*((u64*)&sl->reg_num));
+
+		memcpy(&match[1], &rn, 8);
 		w1_write_block(sl->master, match, 9);
 	}
 	return 0;
diff --git a/fs/9p/fid.c b/fs/9p/fid.c
index 3031e32..2a983d4 100644
--- a/fs/9p/fid.c
+++ b/fs/9p/fid.c
@@ -45,7 +45,7 @@
 	struct v9fs_dentry *dent;
 
 	P9_DPRINTK(P9_DEBUG_VFS, "fid %d dentry %s\n",
-					fid->fid, dentry->d_iname);
+					fid->fid, dentry->d_name.name);
 
 	dent = dentry->d_fsdata;
 	if (!dent) {
@@ -79,7 +79,7 @@
 	struct p9_fid *fid, *ret;
 
 	P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p) uid %d any %d\n",
-		dentry->d_iname, dentry, uid, any);
+		dentry->d_name.name, dentry, uid, any);
 	dent = (struct v9fs_dentry *) dentry->d_fsdata;
 	ret = NULL;
 	if (dent) {
diff --git a/fs/9p/v9fs.c b/fs/9p/v9fs.c
index 24eb010..332b5ff0 100644
--- a/fs/9p/v9fs.c
+++ b/fs/9p/v9fs.c
@@ -160,7 +160,7 @@
 				v9ses->flags |= V9FS_ACCESS_ANY;
 			else {
 				v9ses->flags |= V9FS_ACCESS_SINGLE;
-				v9ses->uid = simple_strtol(s, &e, 10);
+				v9ses->uid = simple_strtoul(s, &e, 10);
 				if (*e != '\0')
 					v9ses->uid = ~0;
 			}
diff --git a/fs/9p/vfs_dentry.c b/fs/9p/vfs_dentry.c
index f9534f1..06dcc7c 100644
--- a/fs/9p/vfs_dentry.c
+++ b/fs/9p/vfs_dentry.c
@@ -52,7 +52,8 @@
 
 static int v9fs_dentry_delete(struct dentry *dentry)
 {
-	P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_iname, dentry);
+	P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_name.name,
+									dentry);
 
 	return 1;
 }
@@ -69,7 +70,8 @@
 static int v9fs_cached_dentry_delete(struct dentry *dentry)
 {
 	struct inode *inode = dentry->d_inode;
-	P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_iname, dentry);
+	P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_name.name,
+									dentry);
 
 	if(!inode)
 		return 1;
@@ -88,7 +90,8 @@
 	struct v9fs_dentry *dent;
 	struct p9_fid *temp, *current_fid;
 
-	P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_iname, dentry);
+	P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_name.name,
+									dentry);
 	dent = dentry->d_fsdata;
 	if (dent) {
 		list_for_each_entry_safe(current_fid, temp, &dent->fidlist,
diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c
index 8314d3f4..2dfcf54 100644
--- a/fs/9p/vfs_inode.c
+++ b/fs/9p/vfs_inode.c
@@ -963,7 +963,8 @@
 	if (buflen > PATH_MAX)
 		buflen = PATH_MAX;
 
-	P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_iname, dentry);
+	P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_name.name,
+									dentry);
 
 	retval = v9fs_readlink(dentry, link, buflen);
 
@@ -1022,7 +1023,8 @@
 {
 	char *s = nd_get_link(nd);
 
-	P9_DPRINTK(P9_DEBUG_VFS, " %s %s\n", dentry->d_name.name, s);
+	P9_DPRINTK(P9_DEBUG_VFS, " %s %s\n", dentry->d_name.name,
+		IS_ERR(s) ? "<error>" : s);
 	if (!IS_ERR(s))
 		__putname(s);
 }
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 2af8626..6d51696 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -3983,7 +3983,8 @@
 
 		node->flags = le16_to_cpu(pSMBr->DFSFlags);
 		if (is_unicode) {
-			__le16 *tmp = kmalloc(strlen(searchName)*2, GFP_KERNEL);
+			__le16 *tmp = kmalloc(strlen(searchName)*2 + 2,
+						GFP_KERNEL);
 			cifsConvertToUCS((__le16 *) tmp, searchName,
 					PATH_MAX, nls_codepage, remap);
 			node->path_consumed = hostlen_fromUCS(tmp,
diff --git a/fs/ocfs2/ocfs2_fs.h b/fs/ocfs2/ocfs2_fs.h
index 5f180cf..5e0c0d0 100644
--- a/fs/ocfs2/ocfs2_fs.h
+++ b/fs/ocfs2/ocfs2_fs.h
@@ -86,7 +86,8 @@
 #define OCFS2_CLEAR_INCOMPAT_FEATURE(sb,mask)			\
 	OCFS2_SB(sb)->s_feature_incompat &= ~(mask)
 
-#define OCFS2_FEATURE_COMPAT_SUPP	OCFS2_FEATURE_COMPAT_BACKUP_SB
+#define OCFS2_FEATURE_COMPAT_SUPP	(OCFS2_FEATURE_COMPAT_BACKUP_SB	\
+					 | OCFS2_FEATURE_COMPAT_JBD2_SB)
 #define OCFS2_FEATURE_INCOMPAT_SUPP	(OCFS2_FEATURE_INCOMPAT_LOCAL_MOUNT \
 					 | OCFS2_FEATURE_INCOMPAT_SPARSE_ALLOC \
 					 | OCFS2_FEATURE_INCOMPAT_INLINE_DATA \
@@ -153,6 +154,11 @@
 #define OCFS2_FEATURE_COMPAT_BACKUP_SB		0x0001
 
 /*
+ * The filesystem will correctly handle journal feature bits.
+ */
+#define OCFS2_FEATURE_COMPAT_JBD2_SB		0x0002
+
+/*
  * Unwritten extents support.
  */
 #define OCFS2_FEATURE_RO_COMPAT_UNWRITTEN	0x0001
diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c
index 054e2ef..74d7367 100644
--- a/fs/ocfs2/xattr.c
+++ b/fs/ocfs2/xattr.c
@@ -2645,9 +2645,9 @@
 				return ret;
 			}
 
-			i = xs->here - old_xh->xh_entries;
-			xs->here = &xs->header->xh_entries[i];
 		}
+		i = xs->here - old_xh->xh_entries;
+		xs->here = &xs->header->xh_entries[i];
 	}
 
 	return ret;
diff --git a/include/acpi/acoutput.h b/include/acpi/acoutput.h
index 09d33c7..db8852d 100644
--- a/include/acpi/acoutput.h
+++ b/include/acpi/acoutput.h
@@ -172,7 +172,7 @@
 
 /* Defaults for debug_level, debug and normal */
 
-#define ACPI_DEBUG_DEFAULT          (ACPI_LV_INIT | ACPI_LV_DEBUG_OBJECT)
+#define ACPI_DEBUG_DEFAULT          (ACPI_LV_INFO)
 #define ACPI_NORMAL_DEFAULT         (ACPI_LV_INIT | ACPI_LV_DEBUG_OBJECT)
 #define ACPI_DEBUG_ALL              (ACPI_LV_AML_DISASSEMBLE | ACPI_LV_ALL_EXCEPTIONS | ACPI_LV_ALL)
 
diff --git a/include/acpi/platform/aclinux.h b/include/acpi/platform/aclinux.h
index 029c8c0..0515e75 100644
--- a/include/acpi/platform/aclinux.h
+++ b/include/acpi/platform/aclinux.h
@@ -141,6 +141,10 @@
 /*
  * We need to show where it is safe to preempt execution of ACPICA
  */
-#define ACPI_PREEMPTION_POINT()	cond_resched()
+#define ACPI_PREEMPTION_POINT()		\
+	do {				\
+		if (!irqs_disabled())	\
+			cond_resched();	\
+	} while (0)
 
 #endif				/* __ACLINUX_H__ */
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 9d77b1d..e26f549 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -319,6 +319,7 @@
 {
 	NAPI_STATE_SCHED,	/* Poll is scheduled */
 	NAPI_STATE_DISABLE,	/* Disable pending */
+	NAPI_STATE_NPSVC,	/* Netpoll - don't dequeue from poll_list */
 };
 
 extern void __napi_schedule(struct napi_struct *n);
@@ -1497,6 +1498,12 @@
 {
 	unsigned long flags;
 
+	/*
+	 * don't let napi dequeue from the cpu poll list
+	 * just in case its running on a different cpu
+	 */
+	if (unlikely(test_bit(NAPI_STATE_NPSVC, &napi->state)))
+		return;
 	local_irq_save(flags);
 	__netif_rx_complete(dev, napi);
 	local_irq_restore(flags);
diff --git a/include/linux/netfilter/nfnetlink_conntrack.h b/include/linux/netfilter/nfnetlink_conntrack.h
index c19595c..29fe9ea 100644
--- a/include/linux/netfilter/nfnetlink_conntrack.h
+++ b/include/linux/netfilter/nfnetlink_conntrack.h
@@ -141,6 +141,7 @@
 #define CTA_PROTONAT_MAX (__CTA_PROTONAT_MAX - 1)
 
 enum ctattr_natseq {
+	CTA_NAT_SEQ_UNSPEC,
 	CTA_NAT_SEQ_CORRECTION_POS,
 	CTA_NAT_SEQ_OFFSET_BEFORE,
 	CTA_NAT_SEQ_OFFSET_AFTER,
diff --git a/include/linux/smp.h b/include/linux/smp.h
index 3f9a600..6e7ba16 100644
--- a/include/linux/smp.h
+++ b/include/linux/smp.h
@@ -146,6 +146,8 @@
 })
 #define smp_call_function_mask(mask, func, info, wait) \
 			(up_smp_call_function(func, info))
+#define smp_call_function_many(mask, func, info, wait) \
+			(up_smp_call_function(func, info))
 static inline void init_call_single_data(void)
 {
 }
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index 73a2f4e..9b42bae 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -158,8 +158,12 @@
  * (rarely) accepted by SET_DESCRIPTOR.
  *
  * Note that all multi-byte values here are encoded in little endian
- * byte order "on the wire".  But when exposed through Linux-USB APIs,
- * they've been converted to cpu byte order.
+ * byte order "on the wire".  Within the kernel and when exposed
+ * through the Linux-USB APIs, they are not converted to cpu byte
+ * order; it is the responsibility of the client code to do this.
+ * The single exception is when device and configuration descriptors (but
+ * not other descriptors) are read from usbfs (i.e. /proc/bus/usb/BBB/DDD);
+ * in this case the fields are converted to host endianness by the kernel.
  */
 
 /*
diff --git a/include/net/irda/irda_device.h b/include/net/irda/irda_device.h
index 3025ae1..94c852d 100644
--- a/include/net/irda/irda_device.h
+++ b/include/net/irda/irda_device.h
@@ -135,9 +135,11 @@
 
 /* 
  * Per-packet information we need to hide inside sk_buff 
- * (must not exceed 48 bytes, check with struct sk_buff) 
+ * (must not exceed 48 bytes, check with struct sk_buff)
+ * The default_qdisc_pad field is a temporary hack.
  */
 struct irda_skb_cb {
+	unsigned int default_qdisc_pad;
 	magic_t magic;       /* Be sure that we can trust the information */
 	__u32   next_speed;  /* The Speed to be set *after* this frame */
 	__u16   mtt;         /* Minimum turn around time */
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index fe00b3b..2606d0f 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -702,7 +702,7 @@
 	 * any child cgroups exist. This is theoretically supportable
 	 * but involves complex error handling, so it's being left until
 	 * later */
-	if (!list_empty(&cgrp->children))
+	if (root->number_of_cgroups > 1)
 		return -EBUSY;
 
 	/* Process each subsystem */
@@ -1024,7 +1024,7 @@
 		if (ret == -EBUSY) {
 			mutex_unlock(&cgroup_mutex);
 			mutex_unlock(&inode->i_mutex);
-			goto drop_new_super;
+			goto free_cg_links;
 		}
 
 		/* EBUSY should be the only error here */
@@ -1073,10 +1073,11 @@
 
 	return simple_set_mnt(mnt, sb);
 
+ free_cg_links:
+	free_cg_links(&tmp_cg_links);
  drop_new_super:
 	up_write(&sb->s_umount);
 	deactivate_super(sb);
-	free_cg_links(&tmp_cg_links);
 	return ret;
 }
 
@@ -2934,9 +2935,6 @@
  again:
 	root = subsys->root;
 	if (root == &rootnode) {
-		printk(KERN_INFO
-		       "Not cloning cgroup for unused subsystem %s\n",
-		       subsys->name);
 		mutex_unlock(&cgroup_mutex);
 		return 0;
 	}
diff --git a/kernel/posix-timers.c b/kernel/posix-timers.c
index 5e79c66..a140e44 100644
--- a/kernel/posix-timers.c
+++ b/kernel/posix-timers.c
@@ -197,6 +197,11 @@
 	return 0;
 }
 
+static int no_timer_create(struct k_itimer *new_timer)
+{
+	return -EOPNOTSUPP;
+}
+
 /*
  * Return nonzero if we know a priori this clockid_t value is bogus.
  */
@@ -248,6 +253,7 @@
 		.clock_getres = hrtimer_get_res,
 		.clock_get = posix_get_monotonic_raw,
 		.clock_set = do_posix_clock_nosettime,
+		.timer_create = no_timer_create,
 	};
 
 	register_posix_clock(CLOCK_REALTIME, &clock_realtime);
diff --git a/lib/dynamic_printk.c b/lib/dynamic_printk.c
index d83660f..8e30295 100644
--- a/lib/dynamic_printk.c
+++ b/lib/dynamic_printk.c
@@ -135,7 +135,7 @@
 	nr_entries--;
 out:
 	up(&debug_list_mutex);
-	return 0;
+	return ret;
 }
 EXPORT_SYMBOL_GPL(unregister_dynamic_debug_module);
 
@@ -289,7 +289,7 @@
 					dynamic_enabled = DYNAMIC_ENABLED_SOME;
 					err = 0;
 					printk(KERN_DEBUG
-					       "debugging enabled for module %s",
+					       "debugging enabled for module %s\n",
 					       elem->name);
 				} else if (!value && (elem->enable == 1)) {
 					elem->enable = 0;
@@ -309,7 +309,7 @@
 					err = 0;
 					printk(KERN_DEBUG
 					       "debugging disabled for module "
-					       "%s", elem->name);
+					       "%s\n", elem->name);
 				}
 			}
 		}
diff --git a/mm/migrate.c b/mm/migrate.c
index d8f0766..037b096 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -998,7 +998,7 @@
 		unsigned long addr = (unsigned long)(*pages);
 		struct vm_area_struct *vma;
 		struct page *page;
-		int err;
+		int err = -EFAULT;
 
 		vma = find_vma(mm, addr);
 		if (!vma)
diff --git a/mm/slob.c b/mm/slob.c
index cb675d1..bf7e8fc 100644
--- a/mm/slob.c
+++ b/mm/slob.c
@@ -535,7 +535,7 @@
 	struct kmem_cache *c;
 
 	c = slob_alloc(sizeof(struct kmem_cache),
-		flags, ARCH_KMALLOC_MINALIGN, -1);
+		GFP_KERNEL, ARCH_KMALLOC_MINALIGN, -1);
 
 	if (c) {
 		c->name = name;
diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c
index ba537fa..ce68e04 100644
--- a/net/bluetooth/rfcomm/core.c
+++ b/net/bluetooth/rfcomm/core.c
@@ -1786,8 +1786,6 @@
 	if (err < 0)
 		return;
 
-	__module_get(nsock->ops->owner);
-
 	/* Set our callbacks */
 	nsock->sk->sk_data_ready   = rfcomm_l2data_ready;
 	nsock->sk->sk_state_change = rfcomm_l2state_change;
diff --git a/net/core/netpoll.c b/net/core/netpoll.c
index 6c7af39..dadac62 100644
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -133,9 +133,11 @@
 
 	npinfo->rx_flags |= NETPOLL_RX_DROP;
 	atomic_inc(&trapped);
+	set_bit(NAPI_STATE_NPSVC, &napi->state);
 
 	work = napi->poll(napi, budget);
 
+	clear_bit(NAPI_STATE_NPSVC, &napi->state);
 	atomic_dec(&trapped);
 	npinfo->rx_flags &= ~NETPOLL_RX_DROP;
 
diff --git a/net/ipv4/netfilter/nf_nat_rule.c b/net/ipv4/netfilter/nf_nat_rule.c
index bea54a6..8d489e7 100644
--- a/net/ipv4/netfilter/nf_nat_rule.c
+++ b/net/ipv4/netfilter/nf_nat_rule.c
@@ -61,7 +61,7 @@
 static struct xt_table nat_table = {
 	.name		= "nat",
 	.valid_hooks	= NAT_VALID_HOOKS,
-	.lock		= __RW_LOCK_UNLOCKED(__nat_table.lock),
+	.lock		= __RW_LOCK_UNLOCKED(nat_table.lock),
 	.me		= THIS_MODULE,
 	.af		= AF_INET,
 };
diff --git a/net/ipv4/tcp_vegas.c b/net/ipv4/tcp_vegas.c
index 7cd2226..a453aac 100644
--- a/net/ipv4/tcp_vegas.c
+++ b/net/ipv4/tcp_vegas.c
@@ -40,18 +40,14 @@
 
 #include "tcp_vegas.h"
 
-/* Default values of the Vegas variables, in fixed-point representation
- * with V_PARAM_SHIFT bits to the right of the binary point.
- */
-#define V_PARAM_SHIFT 1
-static int alpha = 2<<V_PARAM_SHIFT;
-static int beta  = 4<<V_PARAM_SHIFT;
-static int gamma = 1<<V_PARAM_SHIFT;
+static int alpha = 2;
+static int beta  = 4;
+static int gamma = 1;
 
 module_param(alpha, int, 0644);
-MODULE_PARM_DESC(alpha, "lower bound of packets in network (scale by 2)");
+MODULE_PARM_DESC(alpha, "lower bound of packets in network");
 module_param(beta, int, 0644);
-MODULE_PARM_DESC(beta, "upper bound of packets in network (scale by 2)");
+MODULE_PARM_DESC(beta, "upper bound of packets in network");
 module_param(gamma, int, 0644);
 MODULE_PARM_DESC(gamma, "limit on increase (scale by 2)");
 
@@ -172,49 +168,13 @@
 		return;
 	}
 
-	/* The key players are v_beg_snd_una and v_beg_snd_nxt.
-	 *
-	 * These are so named because they represent the approximate values
-	 * of snd_una and snd_nxt at the beginning of the current RTT. More
-	 * precisely, they represent the amount of data sent during the RTT.
-	 * At the end of the RTT, when we receive an ACK for v_beg_snd_nxt,
-	 * we will calculate that (v_beg_snd_nxt - v_beg_snd_una) outstanding
-	 * bytes of data have been ACKed during the course of the RTT, giving
-	 * an "actual" rate of:
-	 *
-	 *     (v_beg_snd_nxt - v_beg_snd_una) / (rtt duration)
-	 *
-	 * Unfortunately, v_beg_snd_una is not exactly equal to snd_una,
-	 * because delayed ACKs can cover more than one segment, so they
-	 * don't line up nicely with the boundaries of RTTs.
-	 *
-	 * Another unfortunate fact of life is that delayed ACKs delay the
-	 * advance of the left edge of our send window, so that the number
-	 * of bytes we send in an RTT is often less than our cwnd will allow.
-	 * So we keep track of our cwnd separately, in v_beg_snd_cwnd.
-	 */
-
 	if (after(ack, vegas->beg_snd_nxt)) {
 		/* Do the Vegas once-per-RTT cwnd adjustment. */
-		u32 old_wnd, old_snd_cwnd;
-
-
-		/* Here old_wnd is essentially the window of data that was
-		 * sent during the previous RTT, and has all
-		 * been acknowledged in the course of the RTT that ended
-		 * with the ACK we just received. Likewise, old_snd_cwnd
-		 * is the cwnd during the previous RTT.
-		 */
-		old_wnd = (vegas->beg_snd_nxt - vegas->beg_snd_una) /
-			tp->mss_cache;
-		old_snd_cwnd = vegas->beg_snd_cwnd;
 
 		/* Save the extent of the current window so we can use this
 		 * at the end of the next RTT.
 		 */
-		vegas->beg_snd_una  = vegas->beg_snd_nxt;
 		vegas->beg_snd_nxt  = tp->snd_nxt;
-		vegas->beg_snd_cwnd = tp->snd_cwnd;
 
 		/* We do the Vegas calculations only if we got enough RTT
 		 * samples that we can be reasonably sure that we got
@@ -252,22 +212,14 @@
 			 *
 			 * This is:
 			 *     (actual rate in segments) * baseRTT
-			 * We keep it as a fixed point number with
-			 * V_PARAM_SHIFT bits to the right of the binary point.
 			 */
-			target_cwnd = ((u64)old_wnd * vegas->baseRTT);
-			target_cwnd <<= V_PARAM_SHIFT;
-			do_div(target_cwnd, rtt);
+			target_cwnd = tp->snd_cwnd * vegas->baseRTT / rtt;
 
 			/* Calculate the difference between the window we had,
 			 * and the window we would like to have. This quantity
 			 * is the "Diff" from the Arizona Vegas papers.
-			 *
-			 * Again, this is a fixed point number with
-			 * V_PARAM_SHIFT bits to the right of the binary
-			 * point.
 			 */
-			diff = (old_wnd << V_PARAM_SHIFT) - target_cwnd;
+			diff = tp->snd_cwnd * (rtt-vegas->baseRTT) / vegas->baseRTT;
 
 			if (diff > gamma && tp->snd_ssthresh > 2 ) {
 				/* Going too fast. Time to slow down
@@ -282,16 +234,13 @@
 				 * truncation robs us of full link
 				 * utilization.
 				 */
-				tp->snd_cwnd = min(tp->snd_cwnd,
-						   ((u32)target_cwnd >>
-						    V_PARAM_SHIFT)+1);
+				tp->snd_cwnd = min(tp->snd_cwnd, (u32)target_cwnd+1);
 
 			} else if (tp->snd_cwnd <= tp->snd_ssthresh) {
 				/* Slow start.  */
 				tcp_slow_start(tp);
 			} else {
 				/* Congestion avoidance. */
-				u32 next_snd_cwnd;
 
 				/* Figure out where we would like cwnd
 				 * to be.
@@ -300,26 +249,17 @@
 					/* The old window was too fast, so
 					 * we slow down.
 					 */
-					next_snd_cwnd = old_snd_cwnd - 1;
+					tp->snd_cwnd--;
 				} else if (diff < alpha) {
 					/* We don't have enough extra packets
 					 * in the network, so speed up.
 					 */
-					next_snd_cwnd = old_snd_cwnd + 1;
+					tp->snd_cwnd++;
 				} else {
 					/* Sending just as fast as we
 					 * should be.
 					 */
-					next_snd_cwnd = old_snd_cwnd;
 				}
-
-				/* Adjust cwnd upward or downward, toward the
-				 * desired value.
-				 */
-				if (next_snd_cwnd > tp->snd_cwnd)
-					tp->snd_cwnd++;
-				else if (next_snd_cwnd < tp->snd_cwnd)
-					tp->snd_cwnd--;
 			}
 
 			if (tp->snd_cwnd < 2)
diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c
index 1724383..d0f54d1 100644
--- a/net/ipv6/ndisc.c
+++ b/net/ipv6/ndisc.c
@@ -912,8 +912,13 @@
 		   is invalid, but ndisc specs say nothing
 		   about it. It could be misconfiguration, or
 		   an smart proxy agent tries to help us :-)
+
+		   We should not print the error if NA has been
+		   received from loopback - it is just our own
+		   unsolicited advertisement.
 		 */
-		ND_PRINTK1(KERN_WARNING
+		if (skb->pkt_type != PACKET_LOOPBACK)
+			ND_PRINTK1(KERN_WARNING
 			   "ICMPv6 NA: someone advertises our address on %s!\n",
 			   ifp->idev->dev->name);
 		in6_ifa_put(ifp);
diff --git a/net/netlabel/netlabel_unlabeled.c b/net/netlabel/netlabel_unlabeled.c
index 90c8506..8c03080 100644
--- a/net/netlabel/netlabel_unlabeled.c
+++ b/net/netlabel/netlabel_unlabeled.c
@@ -562,7 +562,6 @@
 				      const struct in_addr *mask,
 				      struct netlbl_audit *audit_info)
 {
-	int ret_val = 0;
 	struct netlbl_af4list *list_entry;
 	struct netlbl_unlhsh_addr4 *entry;
 	struct audit_buffer *audit_buf;
@@ -577,7 +576,7 @@
 	if (list_entry != NULL)
 		entry = netlbl_unlhsh_addr4_entry(list_entry);
 	else
-		ret_val = -ENOENT;
+		entry = NULL;
 
 	audit_buf = netlbl_audit_start_common(AUDIT_MAC_UNLBL_STCDEL,
 					      audit_info);
@@ -588,19 +587,21 @@
 					  addr->s_addr, mask->s_addr);
 		if (dev != NULL)
 			dev_put(dev);
-		if (entry && security_secid_to_secctx(entry->secid,
-						      &secctx,
-						      &secctx_len) == 0) {
+		if (entry != NULL &&
+		    security_secid_to_secctx(entry->secid,
+					     &secctx, &secctx_len) == 0) {
 			audit_log_format(audit_buf, " sec_obj=%s", secctx);
 			security_release_secctx(secctx, secctx_len);
 		}
-		audit_log_format(audit_buf, " res=%u", ret_val == 0 ? 1 : 0);
+		audit_log_format(audit_buf, " res=%u", entry != NULL ? 1 : 0);
 		audit_log_end(audit_buf);
 	}
 
-	if (ret_val == 0)
-		call_rcu(&entry->rcu, netlbl_unlhsh_free_addr4);
-	return ret_val;
+	if (entry == NULL)
+		return -ENOENT;
+
+	call_rcu(&entry->rcu, netlbl_unlhsh_free_addr4);
+	return 0;
 }
 
 #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
@@ -624,7 +625,6 @@
 				      const struct in6_addr *mask,
 				      struct netlbl_audit *audit_info)
 {
-	int ret_val = 0;
 	struct netlbl_af6list *list_entry;
 	struct netlbl_unlhsh_addr6 *entry;
 	struct audit_buffer *audit_buf;
@@ -638,7 +638,7 @@
 	if (list_entry != NULL)
 		entry = netlbl_unlhsh_addr6_entry(list_entry);
 	else
-		ret_val = -ENOENT;
+		entry = NULL;
 
 	audit_buf = netlbl_audit_start_common(AUDIT_MAC_UNLBL_STCDEL,
 					      audit_info);
@@ -649,19 +649,21 @@
 					  addr, mask);
 		if (dev != NULL)
 			dev_put(dev);
-		if (entry && security_secid_to_secctx(entry->secid,
-						      &secctx,
-						      &secctx_len) == 0) {
+		if (entry != NULL &&
+		    security_secid_to_secctx(entry->secid,
+					     &secctx, &secctx_len) == 0) {
 			audit_log_format(audit_buf, " sec_obj=%s", secctx);
 			security_release_secctx(secctx, secctx_len);
 		}
-		audit_log_format(audit_buf, " res=%u", ret_val == 0 ? 1 : 0);
+		audit_log_format(audit_buf, " res=%u", entry != NULL ? 1 : 0);
 		audit_log_end(audit_buf);
 	}
 
-	if (ret_val == 0)
-		call_rcu(&entry->rcu, netlbl_unlhsh_free_addr6);
-	return ret_val;
+	if (entry == NULL)
+		return -ENOENT;
+
+	call_rcu(&entry->rcu, netlbl_unlhsh_free_addr6);
+	return 0;
 }
 #endif /* IPv6 */
 
diff --git a/net/phonet/pep-gprs.c b/net/phonet/pep-gprs.c
index 9978afb..803eeef 100644
--- a/net/phonet/pep-gprs.c
+++ b/net/phonet/pep-gprs.c
@@ -155,12 +155,13 @@
 static void gprs_write_space(struct sock *sk)
 {
 	struct gprs_dev *dev = sk->sk_user_data;
+	struct net_device *net = dev->net;
 	unsigned credits = pep_writeable(sk);
 
 	spin_lock_bh(&dev->tx_lock);
 	dev->tx_max = credits;
-	if (credits > skb_queue_len(&dev->tx_queue))
-		netif_wake_queue(dev->net);
+	if (credits > skb_queue_len(&dev->tx_queue) && netif_running(net))
+		netif_wake_queue(net);
 	spin_unlock_bh(&dev->tx_lock);
 }
 
@@ -168,6 +169,23 @@
  * Network device callbacks
  */
 
+static int gprs_open(struct net_device *dev)
+{
+	struct gprs_dev *gp = netdev_priv(dev);
+
+	gprs_write_space(gp->sk);
+	return 0;
+}
+
+static int gprs_close(struct net_device *dev)
+{
+	struct gprs_dev *gp = netdev_priv(dev);
+
+	netif_stop_queue(dev);
+	flush_work(&gp->tx_work);
+	return 0;
+}
+
 static int gprs_xmit(struct sk_buff *skb, struct net_device *net)
 {
 	struct gprs_dev *dev = netdev_priv(net);
@@ -254,6 +272,8 @@
 	net->tx_queue_len	= 10;
 
 	net->destructor		= free_netdev;
+	net->open		= gprs_open;
+	net->stop		= gprs_close;
 	net->hard_start_xmit	= gprs_xmit; /* mandatory */
 	net->change_mtu		= gprs_set_mtu;
 	net->get_stats		= gprs_get_stats;
@@ -318,7 +338,6 @@
 	dev->sk = sk;
 
 	printk(KERN_DEBUG"%s: attached\n", net->name);
-	gprs_write_space(sk); /* kick off TX */
 	return net->ifindex;
 
 out_rel:
@@ -341,7 +360,5 @@
 
 	printk(KERN_DEBUG"%s: detached\n", net->name);
 	unregister_netdev(net);
-	flush_scheduled_work();
 	sock_put(sk);
-	skb_queue_purge(&dev->tx_queue);
 }
diff --git a/net/sched/sch_netem.c b/net/sched/sch_netem.c
index a119599..98402f0 100644
--- a/net/sched/sch_netem.c
+++ b/net/sched/sch_netem.c
@@ -46,9 +46,6 @@
 	 layering other disciplines.  It does not need to do bandwidth
 	 control either since that can be handled by using token
 	 bucket or other rate control.
-
-	 The simulator is limited by the Linux timer resolution
-	 and will create packet bursts on the HZ boundary (1ms).
 */
 
 struct netem_sched_data {
diff --git a/net/socket.c b/net/socket.c
index 92764d8..76ba80a 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -2307,6 +2307,7 @@
 	}
 
 	(*newsock)->ops = sock->ops;
+	__module_get((*newsock)->ops->owner);
 
 done:
 	return err;
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 5dd3e89..b77f330 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -69,6 +69,7 @@
 };
 
 enum {
+	STAC_92HD73XX_NO_JD, /* no jack-detection */
 	STAC_92HD73XX_REF,
 	STAC_DELL_M6_AMIC,
 	STAC_DELL_M6_DMIC,
@@ -127,6 +128,7 @@
 };
 
 enum {
+	STAC_D965_REF_NO_JD, /* no jack-detection */
 	STAC_D965_REF,
 	STAC_D965_3ST,
 	STAC_D965_5ST,
@@ -857,6 +859,7 @@
 
 	/* power state controls amps */
 	{ 0x01, AC_VERB_SET_EAPD, 1 << 2},
+	{}
 };
 
 static struct hda_verb stac92hd71bxx_core_init[] = {
@@ -868,6 +871,7 @@
 	{ 0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
 	{ 0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
 	{ 0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+	{}
 };
 
 #define HD_DISABLE_PORTF 2
@@ -1611,6 +1615,7 @@
 };
 
 static const char *stac92hd73xx_models[STAC_92HD73XX_MODELS] = {
+	[STAC_92HD73XX_NO_JD] = "no-jd",
 	[STAC_92HD73XX_REF] = "ref",
 	[STAC_DELL_M6_AMIC] = "dell-m6-amic",
 	[STAC_DELL_M6_DMIC] = "dell-m6-dmic",
@@ -1640,6 +1645,8 @@
 				"unknown Dell", STAC_DELL_M6_DMIC),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x029f,
 				"Dell Studio 1537", STAC_DELL_M6_DMIC),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02a0,
+				"Dell Studio 17", STAC_DELL_M6_DMIC),
 	{} /* terminator */
 };
 
@@ -1662,6 +1669,7 @@
 	/* SigmaTel reference board */
 	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668,
 		      "DFI LanParty", STAC_92HD71BXX_REF),
+	{} /* terminator */
 };
 
 static unsigned int ref92hd71bxx_pin_configs[11] = {
@@ -2027,6 +2035,7 @@
 };
 
 static unsigned int *stac927x_brd_tbl[STAC_927X_MODELS] = {
+	[STAC_D965_REF_NO_JD] = ref927x_pin_configs,
 	[STAC_D965_REF]  = ref927x_pin_configs,
 	[STAC_D965_3ST]  = d965_3st_pin_configs,
 	[STAC_D965_5ST]  = d965_5st_pin_configs,
@@ -2035,6 +2044,7 @@
 };
 
 static const char *stac927x_models[STAC_927X_MODELS] = {
+	[STAC_D965_REF_NO_JD]	= "ref-no-jd",
 	[STAC_D965_REF]		= "ref",
 	[STAC_D965_3ST]		= "3stack",
 	[STAC_D965_5ST]		= "5stack",
@@ -2896,7 +2906,7 @@
 	}
 
 	if ((spec->multiout.num_dacs - cfg->line_outs) > 0 &&
-			cfg->hp_outs && !spec->multiout.hp_nid)
+	    cfg->hp_outs == 1 && !spec->multiout.hp_nid)
 		spec->multiout.hp_nid = nid;
 
 	if (cfg->hp_outs > 1 && cfg->line_out_type == AUTO_PIN_LINE_OUT) {
@@ -4254,14 +4264,17 @@
 
 	switch (spec->multiout.num_dacs) {
 	case 0x3: /* 6 Channel */
+		spec->multiout.hp_nid = 0x17;
 		spec->mixer = stac92hd73xx_6ch_mixer;
 		spec->init = stac92hd73xx_6ch_core_init;
 		break;
 	case 0x4: /* 8 Channel */
+		spec->multiout.hp_nid = 0x18;
 		spec->mixer = stac92hd73xx_8ch_mixer;
 		spec->init = stac92hd73xx_8ch_core_init;
 		break;
 	case 0x5: /* 10 Channel */
+		spec->multiout.hp_nid = 0x19;
 		spec->mixer = stac92hd73xx_10ch_mixer;
 		spec->init = stac92hd73xx_10ch_core_init;
 	};
@@ -4297,6 +4310,7 @@
 		spec->amp_nids = &stac92hd73xx_amp_nids[DELL_M6_AMP];
 		spec->eapd_switch = 0;
 		spec->num_amps = 1;
+		spec->multiout.hp_nid = 0; /* dual HPs */
 
 		if (!spec->init)
 			spec->init = dell_m6_core_init;
@@ -4351,6 +4365,9 @@
 		return err;
 	}
 
+	if (spec->board_config == STAC_92HD73XX_NO_JD)
+		spec->hp_detect = 0;
+
 	codec->patch_ops = stac92xx_patch_ops;
 
 	return 0;
@@ -4899,6 +4916,10 @@
 	 */
 	codec->bus->needs_damn_long_delay = 1;
 
+	/* no jack detecion for ref-no-jd model */
+	if (spec->board_config == STAC_D965_REF_NO_JD)
+		spec->hp_detect = 0;
+
 	return 0;
 }
 
diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c
index e9084fd..acd68ef 100644
--- a/sound/soc/omap/omap-pcm.c
+++ b/sound/soc/omap/omap-pcm.c
@@ -233,7 +233,7 @@
 	if (ret < 0)
 		goto out;
 
-	prtd = kzalloc(sizeof(prtd), GFP_KERNEL);
+	prtd = kzalloc(sizeof(*prtd), GFP_KERNEL);
 	if (prtd == NULL) {
 		ret = -ENOMEM;
 		goto out;