| # |
| # Makefile for the SysKonnect SK-98xx device driver. |
| # |
| |
| |
| # |
| # Standalone driver params |
| # SKPARAM += -DSK_KERNEL_24 |
| # SKPARAM += -DSK_KERNEL_24_26 |
| # SKPARAM += -DSK_KERNEL_26 |
| # SKPARAM += -DSK_KERNEL_22_24 |
| |
| obj-$(CONFIG_SK98LIN) += sk98lin.o |
| sk98lin-objs := \ |
| skge.o \ |
| skethtool.o \ |
| skdim.o \ |
| skaddr.o \ |
| skgehwt.o \ |
| skgeinit.o \ |
| skgepnmi.o \ |
| skgesirq.o \ |
| ski2c.o \ |
| sklm80.o \ |
| skqueue.o \ |
| skrlmt.o \ |
| sktimer.o \ |
| skvpd.o \ |
| skxmac2.o |
| |
| # DBGDEF = \ |
| # -DDEBUG |
| |
| ifdef DEBUG |
| DBGDEF += \ |
| -DSK_DEBUG_CHKMOD=0x00000000L \ |
| -DSK_DEBUG_CHKCAT=0x00000000L |
| endif |
| |
| |
| # **** possible debug modules for SK_DEBUG_CHKMOD ***************** |
| # SK_DBGMOD_MERR 0x00000001L /* general module error indication */ |
| # SK_DBGMOD_HWM 0x00000002L /* Hardware init module */ |
| # SK_DBGMOD_RLMT 0x00000004L /* RLMT module */ |
| # SK_DBGMOD_VPD 0x00000008L /* VPD module */ |
| # SK_DBGMOD_I2C 0x00000010L /* I2C module */ |
| # SK_DBGMOD_PNMI 0x00000020L /* PNMI module */ |
| # SK_DBGMOD_CSUM 0x00000040L /* CSUM module */ |
| # SK_DBGMOD_ADDR 0x00000080L /* ADDR module */ |
| # SK_DBGMOD_DRV 0x00010000L /* DRV module */ |
| |
| # **** possible debug categories for SK_DEBUG_CHKCAT ************** |
| # *** common modules *** |
| # SK_DBGCAT_INIT 0x00000001L module/driver initialization |
| # SK_DBGCAT_CTRL 0x00000002L controlling: add/rmv MCA/MAC and other controls (IOCTL) |
| # SK_DBGCAT_ERR 0x00000004L error handling paths |
| # SK_DBGCAT_TX 0x00000008L transmit path |
| # SK_DBGCAT_RX 0x00000010L receive path |
| # SK_DBGCAT_IRQ 0x00000020L general IRQ handling |
| # SK_DBGCAT_QUEUE 0x00000040L any queue management |
| # SK_DBGCAT_DUMP 0x00000080L large data output e.g. hex dump |
| # SK_DBGCAT_FATAL 0x00000100L large data output e.g. hex dump |
| |
| # *** driver (file skge.c) *** |
| # SK_DBGCAT_DRV_ENTRY 0x00010000 entry points |
| # SK_DBGCAT_DRV_??? 0x00020000 not used |
| # SK_DBGCAT_DRV_MCA 0x00040000 multicast |
| # SK_DBGCAT_DRV_TX_PROGRESS 0x00080000 tx path |
| # SK_DBGCAT_DRV_RX_PROGRESS 0x00100000 rx path |
| # SK_DBGCAT_DRV_PROGRESS 0x00200000 general runtime |
| # SK_DBGCAT_DRV_??? 0x00400000 not used |
| # SK_DBGCAT_DRV_PROM 0x00800000 promiscuous mode |
| # SK_DBGCAT_DRV_TX_FRAME 0x01000000 display tx frames |
| # SK_DBGCAT_DRV_ERROR 0x02000000 error conditions |
| # SK_DBGCAT_DRV_INT_SRC 0x04000000 interrupts sources |
| # SK_DBGCAT_DRV_EVENT 0x08000000 driver events |
| |
| EXTRA_CFLAGS += -Idrivers/net/sk98lin -DSK_DIAG_SUPPORT -DGENESIS -DYUKON $(DBGDEF) $(SKPARAM) |
| |
| clean: |
| rm -f core *.o *.a *.s |
| |
| |
| |
| |
| |
| |
