blob: 66b1454c4db2c77b115ad7166e41ee912930438b [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0
config USB_DWC3
tristate "DesignWare USB3 DRD Core Support"
depends on (USB || USB_GADGET) && HAS_DMA
select USB_XHCI_PLATFORM if USB_XHCI_HCD
select USB_ROLE_SWITCH if USB_DWC3_DUAL_ROLE
help
Say Y or M here if your system has a Dual Role SuperSpeed
USB controller based on the DesignWare USB3 IP Core.
If you choose to build this driver is a dynamically linked
module, the module will be called dwc3.ko.
if USB_DWC3
config USB_DWC3_ULPI
bool "Register ULPI PHY Interface"
depends on USB_ULPI_BUS=y || USB_ULPI_BUS=USB_DWC3
help
Select this if you have ULPI type PHY attached to your DWC3
controller.
choice
bool "DWC3 Mode Selection"
default USB_DWC3_DUAL_ROLE if (USB && USB_GADGET)
default USB_DWC3_HOST if (USB && !USB_GADGET)
default USB_DWC3_GADGET if (!USB && USB_GADGET)
config USB_DWC3_HOST
bool "Host only mode"
depends on USB=y || USB=USB_DWC3
help
Select this when you want to use DWC3 in host mode only,
thereby the gadget feature will be regressed.
config USB_DWC3_GADGET
bool "Gadget only mode"
depends on USB_GADGET=y || USB_GADGET=USB_DWC3
help
Select this when you want to use DWC3 in gadget mode only,
thereby the host feature will be regressed.
config USB_DWC3_DUAL_ROLE
bool "Dual Role mode"
depends on ((USB=y || USB=USB_DWC3) && (USB_GADGET=y || USB_GADGET=USB_DWC3))
depends on (EXTCON=y || EXTCON=USB_DWC3)
help
This is the default mode of working of DWC3 controller where
both host and gadget features are enabled.
endchoice
comment "Platform Glue Driver Support"
config USB_DWC3_OMAP
tristate "Texas Instruments OMAP5 and similar Platforms"
depends on ARCH_OMAP2PLUS || COMPILE_TEST
depends on EXTCON || !EXTCON
depends on OF
default USB_DWC3
help
Some platforms from Texas Instruments like OMAP5, DRA7xxx and
AM437x use this IP for USB2/3 functionality.
Say 'Y' or 'M' here if you have one such device
config USB_DWC3_EXYNOS
tristate "Samsung Exynos Platform"
depends on (ARCH_EXYNOS || COMPILE_TEST) && OF
default USB_DWC3
help
Recent Exynos5 SoCs ship with one DesignWare Core USB3 IP inside,
say 'Y' or 'M' if you have one such device.
config USB_DWC3_PCI
tristate "PCIe-based Platforms"
depends on USB_PCI && ACPI
default USB_DWC3
help
If you're using the DesignWare Core IP with a PCIe (but not HAPS
platform), please say 'Y' or 'M' here.
config USB_DWC3_HAPS
tristate "Synopsys PCIe-based HAPS Platforms"
depends on USB_PCI
default USB_DWC3
help
If you're using the DesignWare Core IP with a Synopsys PCIe HAPS
platform, please say 'Y' or 'M' here.
config USB_DWC3_KEYSTONE
tristate "Texas Instruments Keystone2/AM654 Platforms"
depends on ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST
default USB_DWC3
help
Support of USB2/3 functionality in TI Keystone2 and AM654 platforms.
Say 'Y' or 'M' here if you have one such device
config USB_DWC3_MESON_G12A
tristate "Amlogic Meson G12A Platforms"
depends on OF && COMMON_CLK
depends on ARCH_MESON || COMPILE_TEST
default USB_DWC3
select USB_ROLE_SWITCH
select REGMAP_MMIO
help
Support USB2/3 functionality in Amlogic G12A platforms.
Say 'Y' or 'M' if you have one such device.
config USB_DWC3_OF_SIMPLE
tristate "Generic OF Simple Glue Layer"
depends on OF && COMMON_CLK
default USB_DWC3
help
Support USB2/3 functionality in simple SoC integrations.
Currently supports Xilinx and Qualcomm DWC USB3 IP.
Say 'Y' or 'M' if you have one such device.
config USB_DWC3_ST
tristate "STMicroelectronics Platforms"
depends on (ARCH_STI || COMPILE_TEST) && OF
default USB_DWC3
help
STMicroelectronics SoCs with one DesignWare Core USB3 IP
inside (i.e. STiH407).
Say 'Y' or 'M' if you have one such device.
config USB_DWC3_QCOM
tristate "Qualcomm Platform"
depends on ARCH_QCOM || COMPILE_TEST
depends on EXTCON || !EXTCON
depends on (OF || ACPI)
default USB_DWC3
help
Some Qualcomm SoCs use DesignWare Core IP for USB2/3
functionality.
This driver also handles Qscratch wrapper which is needed
for peripheral mode support.
Say 'Y' or 'M' if you have one such device.
config USB_DWC3_IMX8MP
tristate "NXP iMX8MP Platform"
depends on OF && COMMON_CLK
depends on (ARCH_MXC && ARM64) || COMPILE_TEST
default USB_DWC3
help
NXP iMX8M Plus SoC use DesignWare Core IP for USB2/3
functionality.
Say 'Y' or 'M' if you have one such device.
config USB_DWC3_XILINX
tristate "Xilinx Platforms"
depends on (ARCH_ZYNQMP || ARCH_VERSAL) && OF
default USB_DWC3
help
Support Xilinx SoCs with DesignWare Core USB3 IP.
This driver handles both ZynqMP and Versal SoC operations.
Say 'Y' or 'M' if you have one such device.
endif