blob: 86a5cf9bc19a1e8ac7d47f529fc2492d072857bc [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
/*
* arch/arm64/kernel/ftrace.c
*
* Copyright (C) 2013 Linaro Limited
* Author: AKASHI Takahiro <takahiro.akashi@linaro.org>
*/
#include <linux/ftrace.h>
#include <linux/module.h>
#include <linux/swab.h>
#include <linux/uaccess.h>
#include <asm/cacheflush.h>
#include <asm/debug-monitors.h>
#include <asm/ftrace.h>
#include <asm/insn.h>
#ifdef CONFIG_DYNAMIC_FTRACE
/*
* Replace a single instruction, which may be a branch or NOP.
* If @validate == true, a replaced instruction is checked against 'old'.
*/
static int ftrace_modify_code(unsigned long pc, u32 old, u32 new,
bool validate)
{
u32 replaced;
/*
* Note:
* We are paranoid about modifying text, as if a bug were to happen, it
* could cause us to read or write to someplace that could cause harm.
* Carefully read and modify the code with aarch64_insn_*() which uses
* probe_kernel_*(), and make sure what we read is what we expected it
* to be before modifying it.
*/
if (validate) {
if (aarch64_insn_read((void *)pc, &replaced))
return -EFAULT;
if (replaced != old)
return -EINVAL;
}
if (aarch64_insn_patch_text_nosync((void *)pc, new))
return -EPERM;
return 0;
}
/*
* Replace tracer function in ftrace_caller()
*/
int ftrace_update_ftrace_func(ftrace_func_t func)
{
unsigned long pc;
u32 new;
pc = (unsigned long)&ftrace_call;
new = aarch64_insn_gen_branch_imm(pc, (unsigned long)func,
AARCH64_INSN_BRANCH_LINK);
return ftrace_modify_code(pc, 0, new, false);
}
static struct plt_entry *get_ftrace_plt(struct module *mod, unsigned long addr)
{
#ifdef CONFIG_ARM64_MODULE_PLTS
struct plt_entry *plt = mod->arch.ftrace_trampolines;
if (addr == FTRACE_ADDR)
return &plt[FTRACE_PLT_IDX];
if (addr == FTRACE_REGS_ADDR &&
IS_ENABLED(CONFIG_DYNAMIC_FTRACE_WITH_REGS))
return &plt[FTRACE_REGS_PLT_IDX];
#endif
return NULL;
}
/*
* Turn on the call to ftrace_caller() in instrumented function
*/
int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
{
unsigned long pc = rec->ip;
u32 old, new;
long offset = (long)pc - (long)addr;
if (offset < -SZ_128M || offset >= SZ_128M) {
struct module *mod;
struct plt_entry *plt;
if (!IS_ENABLED(CONFIG_ARM64_MODULE_PLTS))
return -EINVAL;
/*
* On kernels that support module PLTs, the offset between the
* branch instruction and its target may legally exceed the
* range of an ordinary relative 'bl' opcode. In this case, we
* need to branch via a trampoline in the module.
*
* NOTE: __module_text_address() must be called with preemption
* disabled, but we can rely on ftrace_lock to ensure that 'mod'
* retains its validity throughout the remainder of this code.
*/
preempt_disable();
mod = __module_text_address(pc);
preempt_enable();
if (WARN_ON(!mod))
return -EINVAL;
plt = get_ftrace_plt(mod, addr);
if (!plt) {
pr_err("ftrace: no module PLT for %ps\n", (void *)addr);
return -EINVAL;
}
addr = (unsigned long)plt;
}
old = aarch64_insn_gen_nop();
new = aarch64_insn_gen_branch_imm(pc, addr, AARCH64_INSN_BRANCH_LINK);
return ftrace_modify_code(pc, old, new, true);
}
#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
unsigned long addr)
{
unsigned long pc = rec->ip;
u32 old, new;
old = aarch64_insn_gen_branch_imm(pc, old_addr,
AARCH64_INSN_BRANCH_LINK);
new = aarch64_insn_gen_branch_imm(pc, addr, AARCH64_INSN_BRANCH_LINK);
return ftrace_modify_code(pc, old, new, true);
}
/*
* The compiler has inserted two NOPs before the regular function prologue.
* All instrumented functions follow the AAPCS, so x0-x8 and x19-x30 are live,
* and x9-x18 are free for our use.
*
* At runtime we want to be able to swing a single NOP <-> BL to enable or
* disable the ftrace call. The BL requires us to save the original LR value,
* so here we insert a <MOV X9, LR> over the first NOP so the instructions
* before the regular prologue are:
*
* | Compiled | Disabled | Enabled |
* +----------+------------+------------+
* | NOP | MOV X9, LR | MOV X9, LR |
* | NOP | NOP | BL <entry> |
*
* The LR value will be recovered by ftrace_regs_entry, and restored into LR
* before returning to the regular function prologue. When a function is not
* being traced, the MOV is not harmful given x9 is not live per the AAPCS.
*
* Note: ftrace_process_locs() has pre-adjusted rec->ip to be the address of
* the BL.
*/
int ftrace_init_nop(struct module *mod, struct dyn_ftrace *rec)
{
unsigned long pc = rec->ip - AARCH64_INSN_SIZE;
u32 old, new;
old = aarch64_insn_gen_nop();
new = aarch64_insn_gen_move_reg(AARCH64_INSN_REG_9,
AARCH64_INSN_REG_LR,
AARCH64_INSN_VARIANT_64BIT);
return ftrace_modify_code(pc, old, new, true);
}
#endif
/*
* Turn off the call to ftrace_caller() in instrumented function
*/
int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec,
unsigned long addr)
{
unsigned long pc = rec->ip;
bool validate = true;
u32 old = 0, new;
long offset = (long)pc - (long)addr;
if (offset < -SZ_128M || offset >= SZ_128M) {
u32 replaced;
if (!IS_ENABLED(CONFIG_ARM64_MODULE_PLTS))
return -EINVAL;
/*
* 'mod' is only set at module load time, but if we end up
* dealing with an out-of-range condition, we can assume it
* is due to a module being loaded far away from the kernel.
*/
if (!mod) {
preempt_disable();
mod = __module_text_address(pc);
preempt_enable();
if (WARN_ON(!mod))
return -EINVAL;
}
/*
* The instruction we are about to patch may be a branch and
* link instruction that was redirected via a PLT entry. In
* this case, the normal validation will fail, but we can at
* least check that we are dealing with a branch and link
* instruction that points into the right module.
*/
if (aarch64_insn_read((void *)pc, &replaced))
return -EFAULT;
if (!aarch64_insn_is_bl(replaced) ||
!within_module(pc + aarch64_get_branch_offset(replaced),
mod))
return -EINVAL;
validate = false;
} else {
old = aarch64_insn_gen_branch_imm(pc, addr,
AARCH64_INSN_BRANCH_LINK);
}
new = aarch64_insn_gen_nop();
return ftrace_modify_code(pc, old, new, validate);
}
void arch_ftrace_update_code(int command)
{
command |= FTRACE_MAY_SLEEP;
ftrace_modify_all_code(command);
}
int __init ftrace_dyn_arch_init(void)
{
return 0;
}
#endif /* CONFIG_DYNAMIC_FTRACE */
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
/*
* function_graph tracer expects ftrace_return_to_handler() to be called
* on the way back to parent. For this purpose, this function is called
* in _mcount() or ftrace_caller() to replace return address (*parent) on
* the call stack to return_to_handler.
*
* Note that @frame_pointer is used only for sanity check later.
*/
void prepare_ftrace_return(unsigned long self_addr, unsigned long *parent,
unsigned long frame_pointer)
{
unsigned long return_hooker = (unsigned long)&return_to_handler;
unsigned long old;
if (unlikely(atomic_read(&current->tracing_graph_pause)))
return;
/*
* Note:
* No protection against faulting at *parent, which may be seen
* on other archs. It's unlikely on AArch64.
*/
old = *parent;
if (!function_graph_enter(old, self_addr, frame_pointer, NULL))
*parent = return_hooker;
}
#ifdef CONFIG_DYNAMIC_FTRACE
/*
* Turn on/off the call to ftrace_graph_caller() in ftrace_caller()
* depending on @enable.
*/
static int ftrace_modify_graph_caller(bool enable)
{
unsigned long pc = (unsigned long)&ftrace_graph_call;
u32 branch, nop;
branch = aarch64_insn_gen_branch_imm(pc,
(unsigned long)ftrace_graph_caller,
AARCH64_INSN_BRANCH_NOLINK);
nop = aarch64_insn_gen_nop();
if (enable)
return ftrace_modify_code(pc, nop, branch, true);
else
return ftrace_modify_code(pc, branch, nop, true);
}
int ftrace_enable_ftrace_graph_caller(void)
{
return ftrace_modify_graph_caller(true);
}
int ftrace_disable_ftrace_graph_caller(void)
{
return ftrace_modify_graph_caller(false);
}
#endif /* CONFIG_DYNAMIC_FTRACE */
#endif /* CONFIG_FUNCTION_GRAPH_TRACER */