blob: bd1ee9039558d5c784f59cacc1cdd88d806fcc91 [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (c) 2010-2011 Jeremy Kerr <jeremy.kerr@canonical.com>
* Copyright (C) 2011-2012 Linaro Ltd <mturquette@linaro.org>
*/
#ifndef __LINUX_CLK_PROVIDER_H
#define __LINUX_CLK_PROVIDER_H
#include <linux/of.h>
#include <linux/of_clk.h>
/*
* flags used across common struct clk. these flags should only affect the
* top-level framework. custom flags for dealing with hardware specifics
* belong in struct clk_foo
*
* Please update clk_flags[] in drivers/clk/clk.c when making changes here!
*/
#define CLK_SET_RATE_GATE BIT(0) /* must be gated across rate change */
#define CLK_SET_PARENT_GATE BIT(1) /* must be gated across re-parent */
#define CLK_SET_RATE_PARENT BIT(2) /* propagate rate change up one level */
#define CLK_IGNORE_UNUSED BIT(3) /* do not gate even if unused */
/* unused */
/* unused */
#define CLK_GET_RATE_NOCACHE BIT(6) /* do not use the cached clk rate */
#define CLK_SET_RATE_NO_REPARENT BIT(7) /* don't re-parent on rate change */
#define CLK_GET_ACCURACY_NOCACHE BIT(8) /* do not use the cached clk accuracy */
#define CLK_RECALC_NEW_RATES BIT(9) /* recalc rates after notifications */
#define CLK_SET_RATE_UNGATE BIT(10) /* clock needs to run to set rate */
#define CLK_IS_CRITICAL BIT(11) /* do not gate, ever */
/* parents need enable during gate/ungate, set rate and re-parent */
#define CLK_OPS_PARENT_ENABLE BIT(12)
/* duty cycle call may be forwarded to the parent clock */
#define CLK_DUTY_CYCLE_PARENT BIT(13)
struct clk;
struct clk_hw;
struct clk_core;
struct dentry;
/**
* struct clk_rate_request - Structure encoding the clk constraints that
* a clock user might require.
*
* @rate: Requested clock rate. This field will be adjusted by
* clock drivers according to hardware capabilities.
* @min_rate: Minimum rate imposed by clk users.
* @max_rate: Maximum rate imposed by clk users.
* @best_parent_rate: The best parent rate a parent can provide to fulfill the
* requested constraints.
* @best_parent_hw: The most appropriate parent clock that fulfills the
* requested constraints.
*
*/
struct clk_rate_request {
unsigned long rate;
unsigned long min_rate;
unsigned long max_rate;
unsigned long best_parent_rate;
struct clk_hw *best_parent_hw;
};
/**
* struct clk_duty - Struture encoding the duty cycle ratio of a clock
*
* @num: Numerator of the duty cycle ratio
* @den: Denominator of the duty cycle ratio
*/
struct clk_duty {
unsigned int num;
unsigned int den;
};
/**
* struct clk_ops - Callback operations for hardware clocks; these are to
* be provided by the clock implementation, and will be called by drivers
* through the clk_* api.
*
* @prepare: Prepare the clock for enabling. This must not return until
* the clock is fully prepared, and it's safe to call clk_enable.
* This callback is intended to allow clock implementations to
* do any initialisation that may sleep. Called with
* prepare_lock held.
*
* @unprepare: Release the clock from its prepared state. This will typically
* undo any work done in the @prepare callback. Called with
* prepare_lock held.
*
* @is_prepared: Queries the hardware to determine if the clock is prepared.
* This function is allowed to sleep. Optional, if this op is not
* set then the prepare count will be used.
*
* @unprepare_unused: Unprepare the clock atomically. Only called from
* clk_disable_unused for prepare clocks with special needs.
* Called with prepare mutex held. This function may sleep.
*
* @enable: Enable the clock atomically. This must not return until the
* clock is generating a valid clock signal, usable by consumer
* devices. Called with enable_lock held. This function must not
* sleep.
*
* @disable: Disable the clock atomically. Called with enable_lock held.
* This function must not sleep.
*
* @is_enabled: Queries the hardware to determine if the clock is enabled.
* This function must not sleep. Optional, if this op is not
* set then the enable count will be used.
*
* @disable_unused: Disable the clock atomically. Only called from
* clk_disable_unused for gate clocks with special needs.
* Called with enable_lock held. This function must not
* sleep.
*
* @save_context: Save the context of the clock in prepration for poweroff.
*
* @restore_context: Restore the context of the clock after a restoration
* of power.
*
* @recalc_rate Recalculate the rate of this clock, by querying hardware. The
* parent rate is an input parameter. It is up to the caller to
* ensure that the prepare_mutex is held across this call.
* Returns the calculated rate. Optional, but recommended - if
* this op is not set then clock rate will be initialized to 0.
*
* @round_rate: Given a target rate as input, returns the closest rate actually
* supported by the clock. The parent rate is an input/output
* parameter.
*
* @determine_rate: Given a target rate as input, returns the closest rate
* actually supported by the clock, and optionally the parent clock
* that should be used to provide the clock rate.
*
* @set_parent: Change the input source of this clock; for clocks with multiple
* possible parents specify a new parent by passing in the index
* as a u8 corresponding to the parent in either the .parent_names
* or .parents arrays. This function in affect translates an
* array index into the value programmed into the hardware.
* Returns 0 on success, -EERROR otherwise.
*
* @get_parent: Queries the hardware to determine the parent of a clock. The
* return value is a u8 which specifies the index corresponding to
* the parent clock. This index can be applied to either the
* .parent_names or .parents arrays. In short, this function
* translates the parent value read from hardware into an array
* index. Currently only called when the clock is initialized by
* __clk_init. This callback is mandatory for clocks with
* multiple parents. It is optional (and unnecessary) for clocks
* with 0 or 1 parents.
*
* @set_rate: Change the rate of this clock. The requested rate is specified
* by the second argument, which should typically be the return
* of .round_rate call. The third argument gives the parent rate
* which is likely helpful for most .set_rate implementation.
* Returns 0 on success, -EERROR otherwise.
*
* @set_rate_and_parent: Change the rate and the parent of this clock. The
* requested rate is specified by the second argument, which
* should typically be the return of .round_rate call. The
* third argument gives the parent rate which is likely helpful
* for most .set_rate_and_parent implementation. The fourth
* argument gives the parent index. This callback is optional (and
* unnecessary) for clocks with 0 or 1 parents as well as
* for clocks that can tolerate switching the rate and the parent
* separately via calls to .set_parent and .set_rate.
* Returns 0 on success, -EERROR otherwise.
*
* @recalc_accuracy: Recalculate the accuracy of this clock. The clock accuracy
* is expressed in ppb (parts per billion). The parent accuracy is
* an input parameter.
* Returns the calculated accuracy. Optional - if this op is not
* set then clock accuracy will be initialized to parent accuracy
* or 0 (perfect clock) if clock has no parent.
*
* @get_phase: Queries the hardware to get the current phase of a clock.
* Returned values are 0-359 degrees on success, negative
* error codes on failure.
*
* @set_phase: Shift the phase this clock signal in degrees specified
* by the second argument. Valid values for degrees are
* 0-359. Return 0 on success, otherwise -EERROR.
*
* @get_duty_cycle: Queries the hardware to get the current duty cycle ratio
* of a clock. Returned values denominator cannot be 0 and must be
* superior or equal to the numerator.
*
* @set_duty_cycle: Apply the duty cycle ratio to this clock signal specified by
* the numerator (2nd argurment) and denominator (3rd argument).
* Argument must be a valid ratio (denominator > 0
* and >= numerator) Return 0 on success, otherwise -EERROR.
*
* @init: Perform platform-specific initialization magic.
* This is not not used by any of the basic clock types.
* This callback exist for HW which needs to perform some
* initialisation magic for CCF to get an accurate view of the
* clock. It may also be used dynamic resource allocation is
* required. It shall not used to deal with clock parameters,
* such as rate or parents.
* Returns 0 on success, -EERROR otherwise.
*
* @terminate: Free any resource allocated by init.
*
* @debug_init: Set up type-specific debugfs entries for this clock. This
* is called once, after the debugfs directory entry for this
* clock has been created. The dentry pointer representing that
* directory is provided as an argument. Called with
* prepare_lock held. Returns 0 on success, -EERROR otherwise.
*
*
* The clk_enable/clk_disable and clk_prepare/clk_unprepare pairs allow
* implementations to split any work between atomic (enable) and sleepable
* (prepare) contexts. If enabling a clock requires code that might sleep,
* this must be done in clk_prepare. Clock enable code that will never be
* called in a sleepable context may be implemented in clk_enable.
*
* Typically, drivers will call clk_prepare when a clock may be needed later
* (eg. when a device is opened), and clk_enable when the clock is actually
* required (eg. from an interrupt). Note that clk_prepare MUST have been
* called before clk_enable.
*/
struct clk_ops {
int (*prepare)(struct clk_hw *hw);
void (*unprepare)(struct clk_hw *hw);
int (*is_prepared)(struct clk_hw *hw);
void (*unprepare_unused)(struct clk_hw *hw);
int (*enable)(struct clk_hw *hw);
void (*disable)(struct clk_hw *hw);
int (*is_enabled)(struct clk_hw *hw);
void (*disable_unused)(struct clk_hw *hw);
int (*save_context)(struct clk_hw *hw);
void (*restore_context)(struct clk_hw *hw);
unsigned long (*recalc_rate)(struct clk_hw *hw,
unsigned long parent_rate);
long (*round_rate)(struct clk_hw *hw, unsigned long rate,
unsigned long *parent_rate);
int (*determine_rate)(struct clk_hw *hw,
struct clk_rate_request *req);
int (*set_parent)(struct clk_hw *hw, u8 index);
u8 (*get_parent)(struct clk_hw *hw);
int (*set_rate)(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate);
int (*set_rate_and_parent)(struct clk_hw *hw,
unsigned long rate,
unsigned long parent_rate, u8 index);
unsigned long (*recalc_accuracy)(struct clk_hw *hw,
unsigned long parent_accuracy);
int (*get_phase)(struct clk_hw *hw);
int (*set_phase)(struct clk_hw *hw, int degrees);
int (*get_duty_cycle)(struct clk_hw *hw,
struct clk_duty *duty);
int (*set_duty_cycle)(struct clk_hw *hw,
struct clk_duty *duty);
int (*init)(struct clk_hw *hw);
void (*terminate)(struct clk_hw *hw);
void (*debug_init)(struct clk_hw *hw, struct dentry *dentry);
};
/**
* struct clk_parent_data - clk parent information
* @hw: parent clk_hw pointer (used for clk providers with internal clks)
* @fw_name: parent name local to provider registering clk
* @name: globally unique parent name (used as a fallback)
* @index: parent index local to provider registering clk (if @fw_name absent)
*/
struct clk_parent_data {
const struct clk_hw *hw;
const char *fw_name;
const char *name;
int index;
};
/**
* struct clk_init_data - holds init data that's common to all clocks and is
* shared between the clock provider and the common clock framework.
*
* @name: clock name
* @ops: operations this clock supports
* @parent_names: array of string names for all possible parents
* @parent_data: array of parent data for all possible parents (when some
* parents are external to the clk controller)
* @parent_hws: array of pointers to all possible parents (when all parents
* are internal to the clk controller)
* @num_parents: number of possible parents
* @flags: framework-level hints and quirks
*/
struct clk_init_data {
const char *name;
const struct clk_ops *ops;
/* Only one of the following three should be assigned */
const char * const *parent_names;
const struct clk_parent_data *parent_data;
const struct clk_hw **parent_hws;
u8 num_parents;
unsigned long flags;
};
/**
* struct clk_hw - handle for traversing from a struct clk to its corresponding
* hardware-specific structure. struct clk_hw should be declared within struct
* clk_foo and then referenced by the struct clk instance that uses struct
* clk_foo's clk_ops
*
* @core: pointer to the struct clk_core instance that points back to this
* struct clk_hw instance
*
* @clk: pointer to the per-user struct clk instance that can be used to call
* into the clk API
*
* @init: pointer to struct clk_init_data that contains the init data shared
* with the common clock framework. This pointer will be set to NULL once
* a clk_register() variant is called on this clk_hw pointer.
*/
struct clk_hw {
struct clk_core *core;
struct clk *clk;
const struct clk_init_data *init;
};
/*
* DOC: Basic clock implementations common to many platforms
*
* Each basic clock hardware type is comprised of a structure describing the
* clock hardware, implementations of the relevant callbacks in struct clk_ops,
* unique flags for that hardware type, a registration function and an
* alternative macro for static initialization
*/
/**
* struct clk_fixed_rate - fixed-rate clock
* @hw: handle between common and hardware-specific interfaces
* @fixed_rate: constant frequency of clock
* @fixed_accuracy: constant accuracy of clock in ppb (parts per billion)
* @flags: hardware specific flags
*
* Flags:
* * CLK_FIXED_RATE_PARENT_ACCURACY - Use the accuracy of the parent clk
* instead of what's set in @fixed_accuracy.
*/
struct clk_fixed_rate {
struct clk_hw hw;
unsigned long fixed_rate;
unsigned long fixed_accuracy;
unsigned long flags;
};
#define CLK_FIXED_RATE_PARENT_ACCURACY BIT(0)
extern const struct clk_ops clk_fixed_rate_ops;
struct clk_hw *__clk_hw_register_fixed_rate(struct device *dev,
struct device_node *np, const char *name,
const char *parent_name, const struct clk_hw *parent_hw,
const struct clk_parent_data *parent_data, unsigned long flags,
unsigned long fixed_rate, unsigned long fixed_accuracy,
unsigned long clk_fixed_flags);
struct clk *clk_register_fixed_rate(struct device *dev, const char *name,
const char *parent_name, unsigned long flags,
unsigned long fixed_rate);
/**
* clk_hw_register_fixed_rate - register fixed-rate clock with the clock
* framework
* @dev: device that is registering this clock
* @name: name of this clock
* @parent_name: name of clock's parent
* @flags: framework-specific flags
* @fixed_rate: non-adjustable clock rate
*/
#define clk_hw_register_fixed_rate(dev, name, parent_name, flags, fixed_rate) \
__clk_hw_register_fixed_rate((dev), NULL, (name), (parent_name), NULL, \
NULL, (flags), (fixed_rate), 0, 0)
/**
* clk_hw_register_fixed_rate_parent_hw - register fixed-rate clock with
* the clock framework
* @dev: device that is registering this clock
* @name: name of this clock
* @parent_hw: pointer to parent clk
* @flags: framework-specific flags
* @fixed_rate: non-adjustable clock rate
*/
#define clk_hw_register_fixed_rate_parent_hw(dev, name, parent_hw, flags, \
fixed_rate) \
__clk_hw_register_fixed_rate((dev), NULL, (name), NULL, (parent_hw), \
NULL, (flags), (fixed_rate), 0, 0)
/**
* clk_hw_register_fixed_rate_parent_data - register fixed-rate clock with
* the clock framework
* @dev: device that is registering this clock
* @name: name of this clock
* @parent_data: parent clk data
* @flags: framework-specific flags
* @fixed_rate: non-adjustable clock rate
*/
#define clk_hw_register_fixed_rate_parent_data(dev, name, parent_hw, flags, \
fixed_rate) \
__clk_hw_register_fixed_rate((dev), NULL, (name), NULL, NULL, \
(parent_data), (flags), (fixed_rate), 0, \
0)
/**
* clk_hw_register_fixed_rate_with_accuracy - register fixed-rate clock with
* the clock framework
* @dev: device that is registering this clock
* @name: name of this clock
* @parent_name: name of clock's parent
* @flags: framework-specific flags
* @fixed_rate: non-adjustable clock rate
* @fixed_accuracy: non-adjustable clock accuracy
*/
#define clk_hw_register_fixed_rate_with_accuracy(dev, name, parent_name, \
flags, fixed_rate, \
fixed_accuracy) \
__clk_hw_register_fixed_rate((dev), NULL, (name), (parent_name), \
NULL, NULL, (flags), (fixed_rate), \
(fixed_accuracy), 0)
/**
* clk_hw_register_fixed_rate_with_accuracy_parent_hw - register fixed-rate
* clock with the clock framework
* @dev: device that is registering this clock
* @name: name of this clock
* @parent_hw: pointer to parent clk
* @flags: framework-specific flags
* @fixed_rate: non-adjustable clock rate
* @fixed_accuracy: non-adjustable clock accuracy
*/
#define clk_hw_register_fixed_rate_with_accuracy_parent_hw(dev, name, \
parent_hw, flags, fixed_rate, fixed_accuracy) \
__clk_hw_register_fixed_rate((dev), NULL, (name), NULL, (parent_hw) \
NULL, NULL, (flags), (fixed_rate), \
(fixed_accuracy), 0)
/**
* clk_hw_register_fixed_rate_with_accuracy_parent_data - register fixed-rate
* clock with the clock framework
* @dev: device that is registering this clock
* @name: name of this clock
* @parent_name: name of clock's parent
* @flags: framework-specific flags
* @fixed_rate: non-adjustable clock rate
* @fixed_accuracy: non-adjustable clock accuracy
*/
#define clk_hw_register_fixed_rate_with_accuracy_parent_data(dev, name, \
parent_data, flags, fixed_rate, fixed_accuracy) \
__clk_hw_register_fixed_rate((dev), NULL, (name), NULL, NULL, \
(parent_data), NULL, (flags), \
(fixed_rate), (fixed_accuracy), 0)
void clk_unregister_fixed_rate(struct clk *clk);
void clk_hw_unregister_fixed_rate(struct clk_hw *hw);
void of_fixed_clk_setup(struct device_node *np);
/**
* struct clk_gate - gating clock
*
* @hw: handle between common and hardware-specific interfaces
* @reg: register controlling gate
* @bit_idx: single bit controlling gate
* @flags: hardware-specific flags
* @lock: register lock
*
* Clock which can gate its output. Implements .enable & .disable
*
* Flags:
* CLK_GATE_SET_TO_DISABLE - by default this clock sets the bit at bit_idx to
* enable the clock. Setting this flag does the opposite: setting the bit
* disable the clock and clearing it enables the clock
* CLK_GATE_HIWORD_MASK - The gate settings are only in lower 16-bit
* of this register, and mask of gate bits are in higher 16-bit of this
* register. While setting the gate bits, higher 16-bit should also be
* updated to indicate changing gate bits.
* CLK_GATE_BIG_ENDIAN - by default little endian register accesses are used for
* the gate register. Setting this flag makes the register accesses big
* endian.
*/
struct clk_gate {
struct clk_hw hw;
void __iomem *reg;
u8 bit_idx;
u8 flags;
spinlock_t *lock;
};
#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw)
#define CLK_GATE_SET_TO_DISABLE BIT(0)
#define CLK_GATE_HIWORD_MASK BIT(1)
#define CLK_GATE_BIG_ENDIAN BIT(2)
extern const struct clk_ops clk_gate_ops;
struct clk_hw *__clk_hw_register_gate(struct device *dev,
struct device_node *np, const char *name,
const char *parent_name, const struct clk_hw *parent_hw,
const struct clk_parent_data *parent_data,
unsigned long flags,
void __iomem *reg, u8 bit_idx,
u8 clk_gate_flags, spinlock_t *lock);
struct clk *clk_register_gate(struct device *dev, const char *name,
const char *parent_name, unsigned long flags,
void __iomem *reg, u8 bit_idx,
u8 clk_gate_flags, spinlock_t *lock);
/**
* clk_hw_register_gate - register a gate clock with the clock framework
* @dev: device that is registering this clock
* @name: name of this clock
* @parent_name: name of this clock's parent
* @flags: framework-specific flags for this clock
* @reg: register address to control gating of this clock
* @bit_idx: which bit in the register controls gating of this clock
* @clk_gate_flags: gate-specific flags for this clock
* @lock: shared register lock for this clock
*/
#define clk_hw_register_gate(dev, name, parent_name, flags, reg, bit_idx, \
clk_gate_flags, lock) \
__clk_hw_register_gate((dev), NULL, (name), (parent_name), NULL, \
NULL, (flags), (reg), (bit_idx), \
(clk_gate_flags), (lock))
/**
* clk_hw_register_gate_parent_hw - register a gate clock with the clock
* framework
* @dev: device that is registering this clock
* @name: name of this clock
* @parent_hw: pointer to parent clk
* @flags: framework-specific flags for this clock
* @reg: register address to control gating of this clock
* @bit_idx: which bit in the register controls gating of this clock
* @clk_gate_flags: gate-specific flags for this clock
* @lock: shared register lock for this clock
*/
#define clk_hw_register_gate_parent_hw(dev, name, parent_hw, flags, reg, \
bit_idx, clk_gate_flags, lock) \
__clk_hw_register_gate((dev), NULL, (name), NULL, (parent_hw), \
NULL, (flags), (reg), (bit_idx), \
(clk_gate_flags), (lock))
/**
* clk_hw_register_gate_parent_data - register a gate clock with the clock
* framework
* @dev: device that is registering this clock
* @name: name of this clock
* @parent_data: parent clk data
* @flags: framework-specific flags for this clock
* @reg: register address to control gating of this clock
* @bit_idx: which bit in the register controls gating of this clock
* @clk_gate_flags: gate-specific flags for this clock
* @lock: shared register lock for this clock
*/
#define clk_hw_register_gate_parent_data(dev, name, parent_data, flags, reg, \
bit_idx, clk_gate_flags, lock) \
__clk_hw_register_gate((dev), NULL, (name), NULL, NULL, (parent_data), \
(flags), (reg), (bit_idx), \
(clk_gate_flags), (lock))
void clk_unregister_gate(struct clk *clk);
void clk_hw_unregister_gate(struct clk_hw *hw);
int clk_gate_is_enabled(struct clk_hw *hw);
struct clk_div_table {
unsigned int val;
unsigned int div;
};
/**
* struct clk_divider - adjustable divider clock
*
* @hw: handle between common and hardware-specific interfaces
* @reg: register containing the divider
* @shift: shift to the divider bit field
* @width: width of the divider bit field
* @table: array of value/divider pairs, last entry should have div = 0
* @lock: register lock
*
* Clock with an adjustable divider affecting its output frequency. Implements
* .recalc_rate, .set_rate and .round_rate
*
* Flags:
* CLK_DIVIDER_ONE_BASED - by default the divisor is the value read from the
* register plus one. If CLK_DIVIDER_ONE_BASED is set then the divider is
* the raw value read from the register, with the value of zero considered
* invalid, unless CLK_DIVIDER_ALLOW_ZERO is set.
* CLK_DIVIDER_POWER_OF_TWO - clock divisor is 2 raised to the value read from
* the hardware register
* CLK_DIVIDER_ALLOW_ZERO - Allow zero divisors. For dividers which have
* CLK_DIVIDER_ONE_BASED set, it is possible to end up with a zero divisor.
* Some hardware implementations gracefully handle this case and allow a
* zero divisor by not modifying their input clock
* (divide by one / bypass).
* CLK_DIVIDER_HIWORD_MASK - The divider settings are only in lower 16-bit
* of this register, and mask of divider bits are in higher 16-bit of this
* register. While setting the divider bits, higher 16-bit should also be
* updated to indicate changing divider bits.
* CLK_DIVIDER_ROUND_CLOSEST - Makes the best calculated divider to be rounded
* to the closest integer instead of the up one.
* CLK_DIVIDER_READ_ONLY - The divider settings are preconfigured and should
* not be changed by the clock framework.
* CLK_DIVIDER_MAX_AT_ZERO - For dividers which are like CLK_DIVIDER_ONE_BASED
* except when the value read from the register is zero, the divisor is
* 2^width of the field.
* CLK_DIVIDER_BIG_ENDIAN - By default little endian register accesses are used
* for the divider register. Setting this flag makes the register accesses
* big endian.
*/
struct clk_divider {
struct clk_hw hw;
void __iomem *reg;
u8 shift;
u8 width;
u8 flags;
const struct clk_div_table *table;
spinlock_t *lock;
};
#define clk_div_mask(width) ((1 << (width)) - 1)
#define to_clk_divider(_hw) container_of(_hw, struct clk_divider, hw)
#define CLK_DIVIDER_ONE_BASED BIT(0)
#define CLK_DIVIDER_POWER_OF_TWO BIT(1)
#define CLK_DIVIDER_ALLOW_ZERO BIT(2)
#define CLK_DIVIDER_HIWORD_MASK BIT(3)
#define CLK_DIVIDER_ROUND_CLOSEST BIT(4)
#define CLK_DIVIDER_READ_ONLY BIT(5)
#define CLK_DIVIDER_MAX_AT_ZERO BIT(6)
#define CLK_DIVIDER_BIG_ENDIAN BIT(7)
extern const struct clk_ops clk_divider_ops;
extern const struct clk_ops clk_divider_ro_ops;
unsigned long divider_recalc_rate(struct clk_hw *hw, unsigned long parent_rate,
unsigned int val, const struct clk_div_table *table,
unsigned long flags, unsigned long width);
long divider_round_rate_parent(struct clk_hw *hw, struct clk_hw *parent,
unsigned long rate, unsigned long *prate,
const struct clk_div_table *table,
u8 width, unsigned long flags);
long divider_ro_round_rate_parent(struct clk_hw *hw, struct clk_hw *parent,
unsigned long rate, unsigned long *prate,
const struct clk_div_table *table, u8 width,
unsigned long flags, unsigned int val);
int divider_get_val(unsigned long rate, unsigned long parent_rate,
const struct clk_div_table *table, u8 width,
unsigned long flags);
struct clk_hw *__clk_hw_register_divider(struct device *dev,
struct device_node *np, const char *name,
const char *parent_name, const struct clk_hw *parent_hw,
const struct clk_parent_data *parent_data, unsigned long flags,
void __iomem *reg, u8 shift, u8 width, u8 clk_divider_flags,
const struct clk_div_table *table, spinlock_t *lock);
struct clk *clk_register_divider_table(struct device *dev, const char *name,
const char *parent_name, unsigned long flags,
void __iomem *reg, u8 shift, u8 width,
u8 clk_divider_flags, const struct clk_div_table *table,
spinlock_t *lock);
/**
* clk_register_divider - register a divider clock with the clock framework
* @dev: device registering this clock
* @name: name of this clock
* @parent_name: name of clock's parent
* @flags: framework-specific flags
* @reg: register address to adjust divider
* @shift: number of bits to shift the bitfield
* @width: width of the bitfield
* @clk_divider_flags: divider-specific flags for this clock
* @lock: shared register lock for this clock
*/
#define clk_register_divider(dev, name, parent_name, flags, reg, shift, width, \
clk_divider_flags, lock) \
clk_register_divider_table((dev), (name), (parent_name), (flags), \
(reg), (shift), (width), \
(clk_divider_flags), NULL, (lock))
/**
* clk_hw_register_divider - register a divider clock with the clock framework
* @dev: device registering this clock
* @name: name of this clock
* @parent_name: name of clock's parent
* @flags: framework-specific flags
* @reg: register address to adjust divider
* @shift: number of bits to shift the bitfield
* @width: width of the bitfield
* @clk_divider_flags: divider-specific flags for this clock
* @lock: shared register lock for this clock
*/
#define clk_hw_register_divider(dev, name, parent_name, flags, reg, shift, \
width, clk_divider_flags, lock) \
__clk_hw_register_divider((dev), NULL, (name), (parent_name), NULL, \
NULL, (flags), (reg), (shift), (width), \
(clk_divider_flags), NULL, (lock))
/**
* clk_hw_register_divider_parent_hw - register a divider clock with the clock
* framework
* @dev: device registering this clock
* @name: name of this clock
* @parent_hw: pointer to parent clk
* @flags: framework-specific flags
* @reg: register address to adjust divider
* @shift: number of bits to shift the bitfield
* @width: width of the bitfield
* @clk_divider_flags: divider-specific flags for this clock
* @lock: shared register lock for this clock
*/
#define clk_hw_register_divider_parent_hw(dev, name, parent_hw, flags, reg, \
shift, width, clk_divider_flags, \
lock) \
__clk_hw_register_divider((dev), NULL, (name), NULL, (parent_hw), \
NULL, (flags), (reg), (shift), (width), \
(clk_divider_flags), NULL, (lock))
/**
* clk_hw_register_divider_parent_data - register a divider clock with the clock
* framework
* @dev: device registering this clock
* @name: name of this clock
* @parent_data: parent clk data
* @flags: framework-specific flags
* @reg: register address to adjust divider
* @shift: number of bits to shift the bitfield
* @width: width of the bitfield
* @clk_divider_flags: divider-specific flags for this clock
* @lock: shared register lock for this clock
*/
#define clk_hw_register_divider_parent_data(dev, name, parent_data, flags, \
reg, shift, width, \
clk_divider_flags, lock) \
__clk_hw_register_divider((dev), NULL, (name), NULL, NULL, \
(parent_data), (flags), (reg), (shift), \
(width), (clk_divider_flags), NULL, (lock))
/**
* clk_hw_register_divider_table - register a table based divider clock with
* the clock framework
* @dev: device registering this clock
* @name: name of this clock
* @parent_name: name of clock's parent
* @flags: framework-specific flags
* @reg: register address to adjust divider
* @shift: number of bits to shift the bitfield
* @width: width of the bitfield
* @clk_divider_flags: divider-specific flags for this clock
* @table: array of divider/value pairs ending with a div set to 0
* @lock: shared register lock for this clock
*/
#define clk_hw_register_divider_table(dev, name, parent_name, flags, reg, \
shift, width, clk_divider_flags, table, \
lock) \
__clk_hw_register_divider((dev), NULL, (name), (parent_name), NULL, \
NULL, (flags), (reg), (shift), (width), \
(clk_divider_flags), (table), (lock))
/**
* clk_hw_register_divider_table_parent_hw - register a table based divider
* clock with the clock framework
* @dev: device registering this clock
* @name: name of this clock
* @parent_hw: pointer to parent clk
* @flags: framework-specific flags
* @reg: register address to adjust divider
* @shift: number of bits to shift the bitfield
* @width: width of the bitfield
* @clk_divider_flags: divider-specific flags for this clock
* @table: array of divider/value pairs ending with a div set to 0
* @lock: shared register lock for this clock
*/
#define clk_hw_register_divider_table_parent_hw(dev, name, parent_hw, flags, \
reg, shift, width, \
clk_divider_flags, table, \
lock) \
__clk_hw_register_divider((dev), NULL, (name), NULL, (parent_hw), \
NULL, (flags), (reg), (shift), (width), \
(clk_divider_flags), (table), (lock))
/**
* clk_hw_register_divider_table_parent_data - register a table based divider
* clock with the clock framework
* @dev: device registering this clock
* @name: name of this clock
* @parent_data: parent clk data
* @flags: framework-specific flags
* @reg: register address to adjust divider
* @shift: number of bits to shift the bitfield
* @width: width of the bitfield
* @clk_divider_flags: divider-specific flags for this clock
* @table: array of divider/value pairs ending with a div set to 0
* @lock: shared register lock for this clock
*/
#define clk_hw_register_divider_table_parent_data(dev, name, parent_data, \
flags, reg, shift, width, \
clk_divider_flags, table, \
lock) \
__clk_hw_register_divider((dev), NULL, (name), NULL, NULL, \
(parent_data), (flags), (reg), (shift), \
(width), (clk_divider_flags), (table), \
(lock))
void clk_unregister_divider(struct clk *clk);
void clk_hw_unregister_divider(struct clk_hw *hw);
/**
* struct clk_mux - multiplexer clock
*
* @hw: handle between common and hardware-specific interfaces
* @reg: register controlling multiplexer
* @table: array of register values corresponding to the parent index
* @shift: shift to multiplexer bit field
* @mask: mask of mutliplexer bit field
* @flags: hardware-specific flags
* @lock: register lock
*
* Clock with multiple selectable parents. Implements .get_parent, .set_parent
* and .recalc_rate
*
* Flags:
* CLK_MUX_INDEX_ONE - register index starts at 1, not 0
* CLK_MUX_INDEX_BIT - register index is a single bit (power of two)
* CLK_MUX_HIWORD_MASK - The mux settings are only in lower 16-bit of this
* register, and mask of mux bits are in higher 16-bit of this register.
* While setting the mux bits, higher 16-bit should also be updated to
* indicate changing mux bits.
* CLK_MUX_READ_ONLY - The mux registers can't be written, only read in the
* .get_parent clk_op.
* CLK_MUX_ROUND_CLOSEST - Use the parent rate that is closest to the desired
* frequency.
* CLK_MUX_BIG_ENDIAN - By default little endian register accesses are used for
* the mux register. Setting this flag makes the register accesses big
* endian.
*/
struct clk_mux {
struct clk_hw hw;
void __iomem *reg;
u32 *table;
u32 mask;
u8 shift;
u8 flags;
spinlock_t *lock;
};
#define to_clk_mux(_hw) container_of(_hw, struct clk_mux, hw)
#define CLK_MUX_INDEX_ONE BIT(0)
#define CLK_MUX_INDEX_BIT BIT(1)
#define CLK_MUX_HIWORD_MASK BIT(2)
#define CLK_MUX_READ_ONLY BIT(3) /* mux can't be changed */
#define CLK_MUX_ROUND_CLOSEST BIT(4)
#define CLK_MUX_BIG_ENDIAN BIT(5)
extern const struct clk_ops clk_mux_ops;
extern const struct clk_ops clk_mux_ro_ops;
struct clk_hw *__clk_hw_register_mux(struct device *dev, struct device_node *np,
const char *name, u8 num_parents,
const char * const *parent_names,
const struct clk_hw **parent_hws,
const struct clk_parent_data *parent_data,
unsigned long flags, void __iomem *reg, u8 shift, u32 mask,
u8 clk_mux_flags, u32 *table, spinlock_t *lock);
struct clk *clk_register_mux_table(struct device *dev, const char *name,
const char * const *parent_names, u8 num_parents,
unsigned long flags, void __iomem *reg, u8 shift, u32 mask,
u8 clk_mux_flags, u32 *table, spinlock_t *lock);
#define clk_register_mux(dev, name, parent_names, num_parents, flags, reg, \
shift, width, clk_mux_flags, lock) \
clk_register_mux_table((dev), (name), (parent_names), (num_parents), \
(flags), (reg), (shift), BIT((width)) - 1, \
(clk_mux_flags), NULL, (lock))
#define clk_hw_register_mux_table(dev, name, parent_names, num_parents, \
flags, reg, shift, mask, clk_mux_flags, \
table, lock) \
__clk_hw_register_mux((dev), NULL, (name), (num_parents), \
(parent_names), NULL, NULL, (flags), (reg), \
(shift), (mask), (clk_mux_flags), (table), \
(lock))
#define clk_hw_register_mux(dev, name, parent_names, num_parents, flags, reg, \
shift, width, clk_mux_flags, lock) \
__clk_hw_register_mux((dev), NULL, (name), (num_parents), \
(parent_names), NULL, NULL, (flags), (reg), \
(shift), BIT((width)) - 1, (clk_mux_flags), \
NULL, (lock))
#define clk_hw_register_mux_hws(dev, name, parent_hws, num_parents, flags, \
reg, shift, width, clk_mux_flags, lock) \
__clk_hw_register_mux((dev), NULL, (name), (num_parents), NULL, \
(parent_hws), NULL, (flags), (reg), (shift), \
BIT((width)) - 1, (clk_mux_flags), NULL, (lock))
#define clk_hw_register_mux_parent_data(dev, name, parent_data, num_parents, \
flags, reg, shift, width, \
clk_mux_flags, lock) \
__clk_hw_register_mux((dev), NULL, (name), (num_parents), NULL, NULL, \
(parent_data), (flags), (reg), (shift), \
BIT((width)) - 1, (clk_mux_flags), NULL, (lock))
int clk_mux_val_to_index(struct clk_hw *hw, u32 *table, unsigned int flags,
unsigned int val);
unsigned int clk_mux_index_to_val(u32 *table, unsigned int flags, u8 index);
void clk_unregister_mux(struct clk *clk);
void clk_hw_unregister_mux(struct clk_hw *hw);
void of_fixed_factor_clk_setup(struct device_node *node);
/**
* struct clk_fixed_factor - fixed multiplier and divider clock
*
* @hw: handle between common and hardware-specific interfaces
* @mult: multiplier
* @div: divider
*
* Clock with a fixed multiplier and divider. The output frequency is the
* parent clock rate divided by div and multiplied by mult.
* Implements .recalc_rate, .set_rate and .round_rate
*/
struct clk_fixed_factor {
struct clk_hw hw;
unsigned int mult;
unsigned int div;
};
#define to_clk_fixed_factor(_hw) container_of(_hw, struct clk_fixed_factor, hw)
extern const struct clk_ops clk_fixed_factor_ops;
struct clk *clk_register_fixed_factor(struct device *dev, const char *name,
const char *parent_name, unsigned long flags,
unsigned int mult, unsigned int div);
void clk_unregister_fixed_factor(struct clk *clk);
struct clk_hw *clk_hw_register_fixed_factor(struct device *dev,
const char *name, const char *parent_name, unsigned long flags,
unsigned int mult, unsigned int div);
void clk_hw_unregister_fixed_factor(struct clk_hw *hw);
/**
* struct clk_fractional_divider - adjustable fractional divider clock
*
* @hw: handle between common and hardware-specific interfaces
* @reg: register containing the divider
* @mshift: shift to the numerator bit field
* @mwidth: width of the numerator bit field
* @nshift: shift to the denominator bit field
* @nwidth: width of the denominator bit field
* @lock: register lock
*
* Clock with adjustable fractional divider affecting its output frequency.
*
* Flags:
* CLK_FRAC_DIVIDER_ZERO_BASED - by default the numerator and denominator
* is the value read from the register. If CLK_FRAC_DIVIDER_ZERO_BASED
* is set then the numerator and denominator are both the value read
* plus one.
* CLK_FRAC_DIVIDER_BIG_ENDIAN - By default little endian register accesses are
* used for the divider register. Setting this flag makes the register
* accesses big endian.
*/
struct clk_fractional_divider {
struct clk_hw hw;
void __iomem *reg;
u8 mshift;
u8 mwidth;
u32 mmask;
u8 nshift;
u8 nwidth;
u32 nmask;
u8 flags;
void (*approximation)(struct clk_hw *hw,
unsigned long rate, unsigned long *parent_rate,
unsigned long *m, unsigned long *n);
spinlock_t *lock;
};
#define to_clk_fd(_hw) container_of(_hw, struct clk_fractional_divider, hw)
#define CLK_FRAC_DIVIDER_ZERO_BASED BIT(0)
#define CLK_FRAC_DIVIDER_BIG_ENDIAN BIT(1)
extern const struct clk_ops clk_fractional_divider_ops;
struct clk *clk_register_fractional_divider(struct device *dev,
const char *name, const char *parent_name, unsigned long flags,
void __iomem *reg, u8 mshift, u8 mwidth, u8 nshift, u8 nwidth,
u8 clk_divider_flags, spinlock_t *lock);
struct clk_hw *clk_hw_register_fractional_divider(struct device *dev,
const char *name, const char *parent_name, unsigned long flags,
void __iomem *reg, u8 mshift, u8 mwidth, u8 nshift, u8 nwidth,
u8 clk_divider_flags, spinlock_t *lock);
void clk_hw_unregister_fractional_divider(struct clk_hw *hw);
/**
* struct clk_multiplier - adjustable multiplier clock
*
* @hw: handle between common and hardware-specific interfaces
* @reg: register containing the multiplier
* @shift: shift to the multiplier bit field
* @width: width of the multiplier bit field
* @lock: register lock
*
* Clock with an adjustable multiplier affecting its output frequency.
* Implements .recalc_rate, .set_rate and .round_rate
*
* Flags:
* CLK_MULTIPLIER_ZERO_BYPASS - By default, the multiplier is the value read
* from the register, with 0 being a valid value effectively
* zeroing the output clock rate. If CLK_MULTIPLIER_ZERO_BYPASS is
* set, then a null multiplier will be considered as a bypass,
* leaving the parent rate unmodified.
* CLK_MULTIPLIER_ROUND_CLOSEST - Makes the best calculated divider to be
* rounded to the closest integer instead of the down one.
* CLK_MULTIPLIER_BIG_ENDIAN - By default little endian register accesses are
* used for the multiplier register. Setting this flag makes the register
* accesses big endian.
*/
struct clk_multiplier {
struct clk_hw hw;
void __iomem *reg;
u8 shift;
u8 width;
u8 flags;
spinlock_t *lock;
};
#define to_clk_multiplier(_hw) container_of(_hw, struct clk_multiplier, hw)
#define CLK_MULTIPLIER_ZERO_BYPASS BIT(0)
#define CLK_MULTIPLIER_ROUND_CLOSEST BIT(1)
#define CLK_MULTIPLIER_BIG_ENDIAN BIT(2)
extern const struct clk_ops clk_multiplier_ops;
/***
* struct clk_composite - aggregate clock of mux, divider and gate clocks
*
* @hw: handle between common and hardware-specific interfaces
* @mux_hw: handle between composite and hardware-specific mux clock
* @rate_hw: handle between composite and hardware-specific rate clock
* @gate_hw: handle between composite and hardware-specific gate clock
* @mux_ops: clock ops for mux
* @rate_ops: clock ops for rate
* @gate_ops: clock ops for gate
*/
struct clk_composite {
struct clk_hw hw;
struct clk_ops ops;
struct clk_hw *mux_hw;
struct clk_hw *rate_hw;
struct clk_hw *gate_hw;
const struct clk_ops *mux_ops;
const struct clk_ops *rate_ops;
const struct clk_ops *gate_ops;
};
#define to_clk_composite(_hw) container_of(_hw, struct clk_composite, hw)
struct clk *clk_register_composite(struct device *dev, const char *name,
const char * const *parent_names, int num_parents,
struct clk_hw *mux_hw, const struct clk_ops *mux_ops,
struct clk_hw *rate_hw, const struct clk_ops *rate_ops,
struct clk_hw *gate_hw, const struct clk_ops *gate_ops,
unsigned long flags);
struct clk *clk_register_composite_pdata(struct device *dev, const char *name,
const struct clk_parent_data *parent_data, int num_parents,
struct clk_hw *mux_hw, const struct clk_ops *mux_ops,
struct clk_hw *rate_hw, const struct clk_ops *rate_ops,
struct clk_hw *gate_hw, const struct clk_ops *gate_ops,
unsigned long flags);
void clk_unregister_composite(struct clk *clk);
struct clk_hw *clk_hw_register_composite(struct device *dev, const char *name,
const char * const *parent_names, int num_parents,
struct clk_hw *mux_hw, const struct clk_ops *mux_ops,
struct clk_hw *rate_hw, const struct clk_ops *rate_ops,
struct clk_hw *gate_hw, const struct clk_ops *gate_ops,
unsigned long flags);
struct clk_hw *clk_hw_register_composite_pdata(struct device *dev,
const char *name,
const struct clk_parent_data *parent_data, int num_parents,
struct clk_hw *mux_hw, const struct clk_ops *mux_ops,
struct clk_hw *rate_hw, const struct clk_ops *rate_ops,
struct clk_hw *gate_hw, const struct clk_ops *gate_ops,
unsigned long flags);
void clk_hw_unregister_composite(struct clk_hw *hw);
struct clk *clk_register(struct device *dev, struct clk_hw *hw);
struct clk *devm_clk_register(struct device *dev, struct clk_hw *hw);
int __must_check clk_hw_register(struct device *dev, struct clk_hw *hw);
int __must_check devm_clk_hw_register(struct device *dev, struct clk_hw *hw);
int __must_check of_clk_hw_register(struct device_node *node, struct clk_hw *hw);
void clk_unregister(struct clk *clk);
void devm_clk_unregister(struct device *dev, struct clk *clk);
void clk_hw_unregister(struct clk_hw *hw);
void devm_clk_hw_unregister(struct device *dev, struct clk_hw *hw);
/* helper functions */
const char *__clk_get_name(const struct clk *clk);
const char *clk_hw_get_name(const struct clk_hw *hw);
#ifdef CONFIG_COMMON_CLK
struct clk_hw *__clk_get_hw(struct clk *clk);
#else
static inline struct clk_hw *__clk_get_hw(struct clk *clk)
{
return (struct clk_hw *)clk;
}
#endif
unsigned int clk_hw_get_num_parents(const struct clk_hw *hw);
struct clk_hw *clk_hw_get_parent(const struct clk_hw *hw);
struct clk_hw *clk_hw_get_parent_by_index(const struct clk_hw *hw,
unsigned int index);
int clk_hw_get_parent_index(struct clk_hw *hw);
int clk_hw_set_parent(struct clk_hw *hw, struct clk_hw *new_parent);
unsigned int __clk_get_enable_count(struct clk *clk);
unsigned long clk_hw_get_rate(const struct clk_hw *hw);
unsigned long __clk_get_flags(struct clk *clk);
unsigned long clk_hw_get_flags(const struct clk_hw *hw);
#define clk_hw_can_set_rate_parent(hw) \
(clk_hw_get_flags((hw)) & CLK_SET_RATE_PARENT)
bool clk_hw_is_prepared(const struct clk_hw *hw);
bool clk_hw_rate_is_protected(const struct clk_hw *hw);
bool clk_hw_is_enabled(const struct clk_hw *hw);
bool __clk_is_enabled(struct clk *clk);
struct clk *__clk_lookup(const char *name);
int __clk_mux_determine_rate(struct clk_hw *hw,
struct clk_rate_request *req);
int __clk_determine_rate(struct clk_hw *core, struct clk_rate_request *req);
int __clk_mux_determine_rate_closest(struct clk_hw *hw,
struct clk_rate_request *req);
int clk_mux_determine_rate_flags(struct clk_hw *hw,
struct clk_rate_request *req,
unsigned long flags);
void clk_hw_reparent(struct clk_hw *hw, struct clk_hw *new_parent);
void clk_hw_set_rate_range(struct clk_hw *hw, unsigned long min_rate,
unsigned long max_rate);
static inline void __clk_hw_set_clk(struct clk_hw *dst, struct clk_hw *src)
{
dst->clk = src->clk;
dst->core = src->core;
}
static inline long divider_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *prate,
const struct clk_div_table *table,
u8 width, unsigned long flags)
{
return divider_round_rate_parent(hw, clk_hw_get_parent(hw),
rate, prate, table, width, flags);
}
static inline long divider_ro_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *prate,
const struct clk_div_table *table,
u8 width, unsigned long flags,
unsigned int val)
{
return divider_ro_round_rate_parent(hw, clk_hw_get_parent(hw),
rate, prate, table, width, flags,
val);
}
/*
* FIXME clock api without lock protection
*/
unsigned long clk_hw_round_rate(struct clk_hw *hw, unsigned long rate);
struct clk_onecell_data {
struct clk **clks;
unsigned int clk_num;
};
struct clk_hw_onecell_data {
unsigned int num;
struct clk_hw *hws[];
};
#define CLK_OF_DECLARE(name, compat, fn) OF_DECLARE_1(clk, name, compat, fn)
/*
* Use this macro when you have a driver that requires two initialization
* routines, one at of_clk_init(), and one at platform device probe
*/
#define CLK_OF_DECLARE_DRIVER(name, compat, fn) \
static void __init name##_of_clk_init_driver(struct device_node *np) \
{ \
of_node_clear_flag(np, OF_POPULATED); \
fn(np); \
} \
OF_DECLARE_1(clk, name, compat, name##_of_clk_init_driver)
#define CLK_HW_INIT(_name, _parent, _ops, _flags) \
(&(struct clk_init_data) { \
.flags = _flags, \
.name = _name, \
.parent_names = (const char *[]) { _parent }, \
.num_parents = 1, \
.ops = _ops, \
})
#define CLK_HW_INIT_HW(_name, _parent, _ops, _flags) \
(&(struct clk_init_data) { \
.flags = _flags, \
.name = _name, \
.parent_hws = (const struct clk_hw*[]) { _parent }, \
.num_parents = 1, \
.ops = _ops, \
})
/*
* This macro is intended for drivers to be able to share the otherwise
* individual struct clk_hw[] compound literals created by the compiler
* when using CLK_HW_INIT_HW. It does NOT support multiple parents.
*/
#define CLK_HW_INIT_HWS(_name, _parent, _ops, _flags) \
(&(struct clk_init_data) { \
.flags = _flags, \
.name = _name, \
.parent_hws = _parent, \
.num_parents = 1, \
.ops = _ops, \
})
#define CLK_HW_INIT_FW_NAME(_name, _parent, _ops, _flags) \
(&(struct clk_init_data) { \
.flags = _flags, \
.name = _name, \
.parent_data = (const struct clk_parent_data[]) { \
{ .fw_name = _parent }, \
}, \
.num_parents = 1, \
.ops = _ops, \
})
#define CLK_HW_INIT_PARENTS(_name, _parents, _ops, _flags) \
(&(struct clk_init_data) { \
.flags = _flags, \
.name = _name, \
.parent_names = _parents, \
.num_parents = ARRAY_SIZE(_parents), \
.ops = _ops, \
})
#define CLK_HW_INIT_PARENTS_HW(_name, _parents, _ops, _flags) \
(&(struct clk_init_data) { \
.flags = _flags, \
.name = _name, \
.parent_hws = _parents, \
.num_parents = ARRAY_SIZE(_parents), \
.ops = _ops, \
})
#define CLK_HW_INIT_PARENTS_DATA(_name, _parents, _ops, _flags) \
(&(struct clk_init_data) { \
.flags = _flags, \
.name = _name, \
.parent_data = _parents, \
.num_parents = ARRAY_SIZE(_parents), \
.ops = _ops, \
})
#define CLK_HW_INIT_NO_PARENT(_name, _ops, _flags) \
(&(struct clk_init_data) { \
.flags = _flags, \
.name = _name, \
.parent_names = NULL, \
.num_parents = 0, \
.ops = _ops, \
})
#define CLK_FIXED_FACTOR(_struct, _name, _parent, \
_div, _mult, _flags) \
struct clk_fixed_factor _struct = { \
.div = _div, \
.mult = _mult, \
.hw.init = CLK_HW_INIT(_name, \
_parent, \
&clk_fixed_factor_ops, \
_flags), \
}
#define CLK_FIXED_FACTOR_HW(_struct, _name, _parent, \
_div, _mult, _flags) \
struct clk_fixed_factor _struct = { \
.div = _div, \
.mult = _mult, \
.hw.init = CLK_HW_INIT_HW(_name, \
_parent, \
&clk_fixed_factor_ops, \
_flags), \
}
/*
* This macro allows the driver to reuse the _parent array for multiple
* fixed factor clk declarations.
*/
#define CLK_FIXED_FACTOR_HWS(_struct, _name, _parent, \
_div, _mult, _flags) \
struct clk_fixed_factor _struct = { \
.div = _div, \
.mult = _mult, \
.hw.init = CLK_HW_INIT_HWS(_name, \
_parent, \
&clk_fixed_factor_ops, \
_flags), \
}
#define CLK_FIXED_FACTOR_FW_NAME(_struct, _name, _parent, \
_div, _mult, _flags) \
struct clk_fixed_factor _struct = { \
.div = _div, \
.mult = _mult, \
.hw.init = CLK_HW_INIT_FW_NAME(_name, \
_parent, \
&clk_fixed_factor_ops, \
_flags), \
}
#ifdef CONFIG_OF
int of_clk_add_provider(struct device_node *np,
struct clk *(*clk_src_get)(struct of_phandle_args *args,
void *data),
void *data);
int of_clk_add_hw_provider(struct device_node *np,
struct clk_hw *(*get)(struct of_phandle_args *clkspec,
void *data),
void *data);
int devm_of_clk_add_hw_provider(struct device *dev,
struct clk_hw *(*get)(struct of_phandle_args *clkspec,
void *data),
void *data);
void of_clk_del_provider(struct device_node *np);
void devm_of_clk_del_provider(struct device *dev);
struct clk *of_clk_src_simple_get(struct of_phandle_args *clkspec,
void *data);
struct clk_hw *of_clk_hw_simple_get(struct of_phandle_args *clkspec,
void *data);
struct clk *of_clk_src_onecell_get(struct of_phandle_args *clkspec, void *data);
struct clk_hw *of_clk_hw_onecell_get(struct of_phandle_args *clkspec,
void *data);
int of_clk_parent_fill(struct device_node *np, const char **parents,
unsigned int size);
int of_clk_detect_critical(struct device_node *np, int index,
unsigned long *flags);
#else /* !CONFIG_OF */
static inline int of_clk_add_provider(struct device_node *np,
struct clk *(*clk_src_get)(struct of_phandle_args *args,
void *data),
void *data)
{
return 0;
}
static inline int of_clk_add_hw_provider(struct device_node *np,
struct clk_hw *(*get)(struct of_phandle_args *clkspec,
void *data),
void *data)
{
return 0;
}
static inline int devm_of_clk_add_hw_provider(struct device *dev,
struct clk_hw *(*get)(struct of_phandle_args *clkspec,
void *data),
void *data)
{
return 0;
}
static inline void of_clk_del_provider(struct device_node *np) {}
static inline void devm_of_clk_del_provider(struct device *dev) {}
static inline struct clk *of_clk_src_simple_get(
struct of_phandle_args *clkspec, void *data)
{
return ERR_PTR(-ENOENT);
}
static inline struct clk_hw *
of_clk_hw_simple_get(struct of_phandle_args *clkspec, void *data)
{
return ERR_PTR(-ENOENT);
}
static inline struct clk *of_clk_src_onecell_get(
struct of_phandle_args *clkspec, void *data)
{
return ERR_PTR(-ENOENT);
}
static inline struct clk_hw *
of_clk_hw_onecell_get(struct of_phandle_args *clkspec, void *data)
{
return ERR_PTR(-ENOENT);
}
static inline int of_clk_parent_fill(struct device_node *np,
const char **parents, unsigned int size)
{
return 0;
}
static inline int of_clk_detect_critical(struct device_node *np, int index,
unsigned long *flags)
{
return 0;
}
#endif /* CONFIG_OF */
void clk_gate_restore_context(struct clk_hw *hw);
#endif /* CLK_PROVIDER_H */