blob: b9ae4ce4a0a064a2aa0e3ef7a62201cb5efb677c [file] [log] [blame]
* Broadcom SATA3 AHCI Controller
SATA nodes are defined to describe on-chip Serial ATA controllers.
Each SATA controller should have its own node.
Required properties:
- compatible : should be one or more of
"brcm,bcm7216-ahci"
"brcm,bcm7425-ahci"
"brcm,bcm7445-ahci"
"brcm,bcm-nsp-ahci"
"brcm,sata3-ahci"
"brcm,bcm63138-ahci"
- reg : register mappings for AHCI and SATA_TOP_CTRL
- reg-names : "ahci" and "top-ctrl"
- interrupts : interrupt mapping for SATA IRQ
Optional properties:
- reset: for "brcm,bcm7216-ahci" must be a valid reset phandle
pointing to the RESCAL reset controller provider node.
- reset-names: for "brcm,bcm7216-ahci", must be "rescal".
Also see ahci-platform.txt.
Example:
sata@f045a000 {
compatible = "brcm,bcm7445-ahci", "brcm,sata3-ahci";
reg = <0xf045a000 0xa9c>, <0xf0458040 0x24>;
reg-names = "ahci", "top-ctrl";
interrupts = <0 30 0>;
#address-cells = <1>;
#size-cells = <0>;
sata0: sata-port@0 {
reg = <0>;
phys = <&sata_phy 0>;
};
sata1: sata-port@1 {
reg = <1>;
phys = <&sata_phy 1>;
};
};