blob: ee751995c8d0bfbcb85e802e77c3fc8811398575 [file] [log] [blame]
/*
* Device Tree file for Buffalo Linkstation LS-CHLv3
*
* Copyright (C) 2016 Ash Hughes <ashley.hughes@blueyonder.co.uk>
* Copyright (C) 2015-2017
* Roger Shimizu <rogershimizu@gmail.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "orion5x-linkstation.dtsi"
#include "mvebu-linkstation-gpio-simple.dtsi"
#include "mvebu-linkstation-fan.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Buffalo Linkstation LiveV3 (LS-CHL)";
compatible = "buffalo,lschl", "marvell,orion5x-88f5182", "marvell,orion5x";
memory { /* 128 MB */
device_type = "memory";
reg = <0x00000000 0x8000000>;
};
gpio_keys {
func {
label = "Function Button";
linux,code = <KEY_OPTION>;
gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
};
power-on-switch {
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
};
power-auto-switch {
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
};
};
gpio_leds {
pinctrl-0 = <&pmx_led_power &pmx_led_alarm &pmx_led_info &pmx_led_func>;
blue-power-led {
gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
};
red-alarm-led {
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
};
amber-info-led {
gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
};
func {
label = "lschl:func:blue:top";
gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
};
};
gpio_fan {
gpios = <&gpio0 14 GPIO_ACTIVE_LOW
&gpio0 16 GPIO_ACTIVE_LOW>;
alarm-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
};
};
&pinctrl {
pmx_led_power: pmx-leds {
marvell,pins = "mpp0";
marvell,function = "gpio";
};
pmx_power_hdd: pmx-power-hdd {
marvell,pins = "mpp1";
marvell,function = "gpio";
};
pmx_led_alarm: pmx-leds {
marvell,pins = "mpp2";
marvell,function = "gpio";
};
pmx_led_info: pmx-leds {
marvell,pins = "mpp3";
marvell,function = "gpio";
};
pmx_fan_lock: pmx-fan-lock {
marvell,pins = "mpp6";
marvell,function = "gpio";
};
pmx_power_switch: pmx-power-switch {
marvell,pins = "mpp8", "mpp10", "mpp15";
marvell,function = "gpio";
};
pmx_power_usb: pmx-power-usb {
marvell,pins = "mpp9";
marvell,function = "gpio";
};
pmx_fan_high: pmx-fan-high {
marvell,pins = "mpp14";
marvell,function = "gpio";
};
pmx_fan_low: pmx-fan-low {
marvell,pins = "mpp16";
marvell,function = "gpio";
};
pmx_led_func: pmx-leds {
marvell,pins = "mpp17";
marvell,function = "gpio";
};
pmx_sw_init: pmx-sw-init {
marvell,pins = "mpp7";
marvell,function = "gpio";
};
};
&hdd_power {
gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
};
&usb_power {
gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
};