| Sitronix ST7586 display panel |
| |
| Required properties: |
| - compatible: "lego,ev3-lcd". |
| - a0-gpios: The A0 signal (since this binding is for serial mode, this is |
| the pin labeled D1 on the controller, not the pin labeled A0) |
| - reset-gpios: Reset pin |
| |
| The node for this driver must be a child node of a SPI controller, hence |
| all mandatory properties described in ../spi/spi-bus.txt must be specified. |
| |
| Optional properties: |
| - rotation: panel rotation in degrees counter clockwise (0,90,180,270) |
| |
| Example: |
| display@0{ |
| compatible = "lego,ev3-lcd"; |
| reg = <0>; |
| spi-max-frequency = <10000000>; |
| a0-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>; |
| reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>; |
| }; |
