blob: 91bb3c2307a79d978d86b0cb7ddd00cb3b0df369 [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0-only
%YAML 1.2
---
$id: http://devicetree.org/schemas/interrupt-controller/mti,gic.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: MIPS Global Interrupt Controller
maintainers:
- Paul Burton <paulburton@kernel.org>
- Thomas Bogendoerfer <tsbogend@alpha.franken.de>
description: |
The MIPS GIC routes external interrupts to individual VPEs and IRQ pins.
It also supports local (per-processor) interrupts and software-generated
interrupts which can be used as IPIs. The GIC also includes a free-running
global timer, per-CPU count/compare timers, and a watchdog.
properties:
compatible:
const: mti,gic
"#interrupt-cells":
const: 3
description: |
The 1st cell is the type of interrupt: local or shared defined in the
file 'dt-bindings/interrupt-controller/mips-gic.h'. The 2nd cell is the
GIC interrupt number. The 3d cell encodes the interrupt flags setting up
the IRQ trigger modes, which are defined in the file
'dt-bindings/interrupt-controller/irq.h'.
reg:
description: |
Base address and length of the GIC registers space. If not present,
the base address reported by the hardware GCR_GIC_BASE will be used.
maxItems: 1
interrupt-controller: true
mti,reserved-cpu-vectors:
description: |
Specifies the list of CPU interrupt vectors to which the GIC may not
route interrupts. This property is ignored if the CPU is started in EIC
mode.
$ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
maxItems: 6
uniqueItems: true
items:
minimum: 2
maximum: 7
mti,reserved-ipi-vectors:
description: |
Specifies the range of GIC interrupts that are reserved for IPIs.
It accepts two values: the 1st is the starting interrupt and the 2nd is
the size of the reserved range. If not specified, the driver will
allocate the last (2 * number of VPEs in the system).
$ref: /schemas/types.yaml#/definitions/uint32-array
items:
- minimum: 0
maximum: 254
- minimum: 2
maximum: 254
timer:
type: object
description: |
MIPS GIC includes a free-running global timer, per-CPU count/compare
timers, and a watchdog. Currently only the GIC Timer is supported.
properties:
compatible:
const: mti,gic-timer
interrupts:
description: |
Interrupt for the GIC local timer, so normally it's suppose to be of
<GIC_LOCAL X IRQ_TYPE_NONE> format.
maxItems: 1
clocks:
maxItems: 1
clock-frequency: true
required:
- compatible
- interrupts
oneOf:
- required:
- clocks
- required:
- clock-frequency
additionalProperties: false
additionalProperties: false
required:
- compatible
- "#interrupt-cells"
- interrupt-controller
examples:
- |
#include <dt-bindings/interrupt-controller/mips-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
interrupt-controller@1bdc0000 {
compatible = "mti,gic";
reg = <0x1bdc0000 0x20000>;
interrupt-controller;
#interrupt-cells = <3>;
mti,reserved-cpu-vectors = <7>;
mti,reserved-ipi-vectors = <40 8>;
timer {
compatible = "mti,gic-timer";
interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
clock-frequency = <50000000>;
};
};
- |
#include <dt-bindings/interrupt-controller/mips-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
interrupt-controller@1bdc0000 {
compatible = "mti,gic";
reg = <0x1bdc0000 0x20000>;
interrupt-controller;
#interrupt-cells = <3>;
timer {
compatible = "mti,gic-timer";
interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
clocks = <&cpu_pll>;
};
};
- |
interrupt-controller {
compatible = "mti,gic";
interrupt-controller;
#interrupt-cells = <3>;
};
...