blob: 36b135bf9f2a3401e4edc4dc06f19544446029de [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/media/nxp,imx-mipi-csi2.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: NXP i.MX7 and i.MX8 MIPI CSI-2 receiver
maintainers:
- Rui Miguel Silva <rmfrfs@gmail.com>
- Laurent Pinchart <laurent.pinchart@ideasonboard.com>
description: |-
The NXP i.MX7 and i.MX8 families contain SoCs that include a MIPI CSI-2
receiver IP core named CSIS. The IP core originates from Samsung, and may be
compatible with some of the Exynos4 and S5P SoCs. i.MX7 SoCs use CSIS version
3.3, and i.MX8 SoCs use CSIS version 3.6.3.
While the CSI-2 receiver is separate from the MIPI D-PHY IP core, the PHY is
completely wrapped by the CSIS and doesn't expose a control interface of its
own. This binding thus covers both IP cores.
properties:
compatible:
enum:
- fsl,imx7-mipi-csi2
- fsl,imx8mm-mipi-csi2
reg:
maxItems: 1
interrupts:
maxItems: 1
clocks:
minItems: 3
items:
- description: The peripheral clock (a.k.a. APB clock)
- description: The external clock (optionally used as the pixel clock)
- description: The MIPI D-PHY clock
- description: The AXI clock
clock-names:
minItems: 3
items:
- const: pclk
- const: wrap
- const: phy
- const: axi
power-domains:
maxItems: 1
phy-supply:
description: The MIPI D-PHY digital power supply
resets:
items:
- description: MIPI D-PHY slave reset
clock-frequency:
description: The desired external clock ("wrap") frequency, in Hz
default: 166000000
ports:
$ref: /schemas/graph.yaml#/properties/ports
properties:
port@0:
$ref: /schemas/graph.yaml#/$defs/port-base
unevaluatedProperties: false
description:
Input port node, single endpoint describing the CSI-2 transmitter.
properties:
endpoint:
$ref: video-interfaces.yaml#
unevaluatedProperties: false
properties:
data-lanes:
description:
Note that 'fsl,imx7-mipi-csi2' only supports up to 2 data lines.
minItems: 1
items:
- const: 1
- const: 2
- const: 3
- const: 4
required:
- data-lanes
port@1:
$ref: /schemas/graph.yaml#/properties/port
description:
Output port node
required:
- compatible
- reg
- interrupts
- clocks
- clock-names
- power-domains
- ports
additionalProperties: false
allOf:
- if:
properties:
compatible:
contains:
const: fsl,imx7-mipi-csi2
then:
required:
- phy-supply
- resets
else:
properties:
clocks:
minItems: 4
clock-names:
minItems: 4
phy-supply: false
resets: false
examples:
- |
#include <dt-bindings/clock/imx7d-clock.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/reset/imx7-reset.h>
mipi-csi@30750000 {
compatible = "fsl,imx7-mipi-csi2";
reg = <0x30750000 0x10000>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_IPG_ROOT_CLK>,
<&clks IMX7D_MIPI_CSI_ROOT_CLK>,
<&clks IMX7D_MIPI_DPHY_ROOT_CLK>;
clock-names = "pclk", "wrap", "phy";
clock-frequency = <166000000>;
power-domains = <&pgc_mipi_phy>;
phy-supply = <&reg_1p0d>;
resets = <&src IMX7_RESET_MIPI_PHY_MRST>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
mipi_from_sensor: endpoint {
remote-endpoint = <&ov2680_to_mipi>;
data-lanes = <1>;
};
};
port@1 {
reg = <1>;
mipi_vc0_to_csi_mux: endpoint {
remote-endpoint = <&csi_mux_from_mipi_vc0>;
};
};
};
};
- |
#include <dt-bindings/clock/imx8mm-clock.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
mipi-csi@32e30000 {
compatible = "fsl,imx8mm-mipi-csi2";
reg = <0x32e30000 0x1000>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <333000000>;
clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>,
<&clk IMX8MM_CLK_CSI1_ROOT>,
<&clk IMX8MM_CLK_CSI1_PHY_REF>,
<&clk IMX8MM_CLK_DISP_AXI_ROOT>;
clock-names = "pclk", "wrap", "phy", "axi";
power-domains = <&mipi_pd>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
imx8mm_mipi_csi_in: endpoint {
remote-endpoint = <&imx477_out>;
data-lanes = <1 2 3 4>;
};
};
port@1 {
reg = <1>;
imx8mm_mipi_csi_out: endpoint {
remote-endpoint = <&csi_in>;
};
};
};
};
...