blob: 31bf825c65987c55186e56a4a1a9f50b9d313b34 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/ti,cpsw-switch.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: TI SoC Ethernet Switch Controller (CPSW) Device Tree Bindings
maintainers:
- Grygorii Strashko <grygorii.strashko@ti.com>
- Sekhar Nori <nsekhar@ti.com>
description:
The 3-port switch gigabit ethernet subsystem provides ethernet packet
communication and can be configured as an ethernet switch. It provides the
gigabit media independent interface (GMII),reduced gigabit media
independent interface (RGMII), reduced media independent interface (RMII),
the management data input output (MDIO) for physical layer device (PHY)
management.
properties:
compatible:
oneOf:
- const: ti,cpsw-switch
- items:
- const: ti,am335x-cpsw-switch
- const: ti,cpsw-switch
- items:
- const: ti,am4372-cpsw-switch
- const: ti,cpsw-switch
- items:
- const: ti,dra7-cpsw-switch
- const: ti,cpsw-switch
reg:
maxItems: 1
description:
The physical base address and size of full the CPSW module IO range
'#address-cells':
const: 1
'#size-cells':
const: 1
ranges: true
clocks:
maxItems: 1
description: CPSW functional clock
clock-names:
items:
- const: fck
interrupts:
items:
- description: RX_THRESH interrupt
- description: RX interrupt
- description: TX interrupt
- description: MISC interrupt
interrupt-names:
items:
- const: "rx_thresh"
- const: "rx"
- const: "tx"
- const: "misc"
pinctrl-names: true
syscon:
$ref: /schemas/types.yaml#/definitions/phandle
description:
Phandle to the system control device node which provides access to
efuse IO range with MAC addresses
ethernet-ports:
type: object
properties:
'#address-cells':
const: 1
'#size-cells':
const: 0
patternProperties:
"^port@[0-9]+$":
type: object
description: CPSW external ports
$ref: ethernet-controller.yaml#
properties:
reg:
items:
- enum: [1, 2]
description: CPSW port number
phys:
maxItems: 1
description: phandle on phy-gmii-sel PHY
label:
description: label associated with this port
ti,dual-emac-pvid:
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
maximum: 1024
description:
Specifies default PORT VID to be used to segregate
ports. Default value - CPSW port number.
required:
- reg
- phys
cpts:
type: object
description:
The Common Platform Time Sync (CPTS) module
properties:
clocks:
maxItems: 1
description: CPTS reference clock
clock-names:
items:
- const: cpts
cpts_clock_mult:
$ref: /schemas/types.yaml#/definitions/uint32
description:
Numerator to convert input clock ticks into ns
cpts_clock_shift:
$ref: /schemas/types.yaml#/definitions/uint32
description:
Denominator to convert input clock ticks into ns.
Mult and shift will be calculated basing on CPTS rftclk frequency if
both cpts_clock_shift and cpts_clock_mult properties are not provided.
required:
- clocks
- clock-names
patternProperties:
"^mdio@":
type: object
description:
CPSW MDIO bus.
$ref: "ti,davinci-mdio.yaml#"
required:
- compatible
- reg
- ranges
- clocks
- clock-names
- interrupts
- interrupt-names
- '#address-cells'
- '#size-cells'
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/dra7.h>
mac_sw: switch@0 {
compatible = "ti,dra7-cpsw-switch","ti,cpsw-switch";
reg = <0x0 0x4000>;
ranges = <0 0 0x4000>;
clocks = <&gmac_main_clk>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
syscon = <&scm_conf>;
interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "rx_thresh", "rx", "tx", "misc";
ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
cpsw_port1: port@1 {
reg = <1>;
label = "port1";
mac-address = [ 00 00 00 00 00 00 ];
phys = <&phy_gmii_sel 1>;
phy-handle = <&ethphy0_sw>;
phy-mode = "rgmii";
ti,dual-emac-pvid = <1>;
};
cpsw_port2: port@2 {
reg = <2>;
label = "wan";
mac-address = [ 00 00 00 00 00 00 ];
phys = <&phy_gmii_sel 2>;
phy-handle = <&ethphy1_sw>;
phy-mode = "rgmii";
ti,dual-emac-pvid = <2>;
};
};
davinci_mdio_sw: mdio@1000 {
compatible = "ti,cpsw-mdio","ti,davinci_mdio";
reg = <0x1000 0x100>;
clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <0>;
bus_freq = <1000000>;
ethphy0_sw: ethernet-phy@0 {
reg = <0>;
};
ethphy1_sw: ethernet-phy@1 {
reg = <1>;
};
};
cpts {
clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 25>;
clock-names = "cpts";
};
};