blob: 1fdc2741c36ec0adf373601d797f2bc86a597ef1 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/remoteproc/ti,omap-remoteproc.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: OMAP4+ Remoteproc Devices
maintainers:
- Suman Anna <s-anna@ti.com>
description:
The OMAP family of SoCs usually have one or more slave processor sub-systems
that are used to offload some of the processor-intensive tasks, or to manage
other hardware accelerators, for achieving various system level goals.
The processor cores in the sub-system are usually behind an IOMMU, and may
contain additional sub-modules like Internal RAM and/or ROMs, L1 and/or L2
caches, an Interrupt Controller, a Cache Controller etc.
The OMAP SoCs usually have a DSP processor sub-system and/or an IPU processor
sub-system. The DSP processor sub-system can contain any of the TI's C64x,
C66x or C67x family of DSP cores as the main execution unit. The IPU processor
sub-system usually contains either a Dual-Core Cortex-M3 or Dual-Core
Cortex-M4 processors.
Each remote processor sub-system is represented as a single DT node. Each node
has a number of required or optional properties that enable the OS running on
the host processor (MPU) to perform the device management of the remote
processor and to communicate with the remote processor. The various properties
can be classified as constant or variable. The constant properties are
dictated by the SoC and does not change from one board to another having the
same SoC. Examples of constant properties include 'iommus', 'reg'. The
variable properties are dictated by the system integration aspects such as
memory on the board, or configuration used within the corresponding firmware
image. Examples of variable properties include 'mboxes', 'memory-region',
'timers', 'watchdog-timers' etc.
properties:
compatible:
enum:
- ti,omap4-dsp
- ti,omap5-dsp
- ti,dra7-dsp
- ti,omap4-ipu
- ti,omap5-ipu
- ti,dra7-ipu
iommus:
minItems: 1
maxItems: 2
description: |
phandles to OMAP IOMMU nodes, that need to be programmed
for this remote processor to access any external RAM memory or
other peripheral device address spaces. This property usually
has only a single phandle. Multiple phandles are used only in
cases where the sub-system has different ports for different
sub-modules within the processor sub-system (eg: DRA7 DSPs),
and need the same programming in both the MMUs.
mboxes:
minItems: 1
maxItems: 2
description: |
OMAP Mailbox specifier denoting the sub-mailbox, to be used for
communication with the remote processor. The specifier format is
as per the bindings,
Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml
This property should match with the sub-mailbox node used in
the firmware image.
clocks:
maxItems: 1
description: |
Main functional clock for the remote processor
resets:
minItems: 1
maxItems: 2
description: |
Reset handles for the remote processor
firmware-name:
description: |
Default name of the firmware to load to the remote processor.
# Optional properties:
# --------------------
# Some of these properties are mandatory on some SoCs, and some are optional
# depending on the configuration of the firmware image to be executed on the
# remote processor. The conditions are mentioned for each property.
#
# The following are the optional properties:
memory-region:
maxItems: 1
description: |
phandle to the reserved memory node to be associated
with the remoteproc device. The reserved memory node
can be a CMA memory node, and should be defined as
per the bindings,
Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
reg:
description: |
Address space for any remoteproc memories present on
the SoC. Should contain an entry for each value in
'reg-names'. These are mandatory for all DSP and IPU
processors that have them (OMAP4/OMAP5 DSPs do not have
any RAMs)
reg-names:
description: |
Required names for each of the address spaces defined in
the 'reg' property. Expects the names from the following
list, in the specified order, each representing the corresponding
internal RAM memory region.
minItems: 1
items:
- const: l2ram
- const: l1pram
- const: l1dram
ti,bootreg:
$ref: /schemas/types.yaml#/definitions/phandle-array
items:
- items:
- description: phandle to the System Control Configuration region
- description: register offset of the boot address register
- description: the bit shift within the register
description:
This property is required for all the DSP instances on OMAP4, OMAP5
and DRA7xx SoCs.
ti,autosuspend-delay-ms:
description: |
Custom autosuspend delay for the remoteproc in milliseconds.
Recommended values is preferable to be in the order of couple
of seconds. A negative value can also be used to disable the
autosuspend behavior.
ti,timers:
$ref: /schemas/types.yaml#/definitions/phandle-array
items:
maxItems: 1
description: |
One or more phandles to OMAP DMTimer nodes, that serve
as System/Tick timers for the OS running on the remote
processors. This will usually be a single timer if the
processor sub-system is running in SMP mode, or one per
core in the processor sub-system. This can also be used
to reserve specific timers to be dedicated to the
remote processors.
This property is mandatory on remote processors requiring
external tick wakeup, and to support Power Management
features. The timers to be used should match with the
timers used in the firmware image.
ti,watchdog-timers:
$ref: /schemas/types.yaml#/definitions/phandle-array
items:
maxItems: 1
description: |
One or more phandles to OMAP DMTimer nodes, used to
serve as Watchdog timers for the processor cores. This
will usually be one per executing processor core, even
if the processor sub-system is running a SMP OS.
The timers to be used should match with the watchdog
timers used in the firmware image.
if:
properties:
compatible:
enum:
- ti,dra7-dsp
then:
properties:
reg:
minItems: 3
maxItems: 3
required:
- reg
- reg-names
- ti,bootreg
else:
if:
properties:
compatible:
enum:
- ti,omap4-ipu
- ti,omap5-ipu
- ti,dra7-ipu
then:
properties:
reg:
minItems: 1
maxItems: 1
ti,bootreg: false
required:
- reg
- reg-names
else:
properties:
reg: false
required:
- ti,bootreg
required:
- compatible
- iommus
- mboxes
- clocks
- resets
- firmware-name
additionalProperties: false
examples:
- |
//Example 1: OMAP4 DSP
/* DSP Reserved Memory node */
#include <dt-bindings/clock/omap4.h>
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
dsp_memory_region: dsp-memory@98000000 {
compatible = "shared-dma-pool";
reg = <0x98000000 0x800000>;
reusable;
};
};
/* DSP node */
ocp {
dsp: dsp {
compatible = "ti,omap4-dsp";
ti,bootreg = <&scm_conf 0x304 0>;
iommus = <&mmu_dsp>;
mboxes = <&mailbox &mbox_dsp>;
memory-region = <&dsp_memory_region>;
ti,timers = <&timer5>;
ti,watchdog-timers = <&timer6>;
clocks = <&tesla_clkctrl OMAP4_DSP_CLKCTRL 0>;
resets = <&prm_tesla 0>, <&prm_tesla 1>;
firmware-name = "omap4-dsp-fw.xe64T";
};
};
- |+
//Example 2: OMAP5 IPU
/* IPU Reserved Memory node */
#include <dt-bindings/clock/omap5.h>
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ipu_memory_region: ipu-memory@95800000 {
compatible = "shared-dma-pool";
reg = <0 0x95800000 0 0x3800000>;
reusable;
};
};
/* IPU node */
ocp {
#address-cells = <1>;
#size-cells = <1>;
ipu: ipu@55020000 {
compatible = "ti,omap5-ipu";
reg = <0x55020000 0x10000>;
reg-names = "l2ram";
iommus = <&mmu_ipu>;
mboxes = <&mailbox &mbox_ipu>;
memory-region = <&ipu_memory_region>;
ti,timers = <&timer3>, <&timer4>;
ti,watchdog-timers = <&timer9>, <&timer11>;
clocks = <&ipu_clkctrl OMAP5_MMU_IPU_CLKCTRL 0>;
resets = <&prm_core 2>;
firmware-name = "omap5-ipu-fw.xem4";
};
};
- |+
//Example 3: DRA7xx/AM57xx DSP
/* DSP1 Reserved Memory node */
#include <dt-bindings/clock/dra7.h>
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
dsp1_memory_region: dsp1-memory@99000000 {
compatible = "shared-dma-pool";
reg = <0x0 0x99000000 0x0 0x4000000>;
reusable;
};
};
/* DSP1 node */
ocp {
#address-cells = <1>;
#size-cells = <1>;
dsp1: dsp@40800000 {
compatible = "ti,dra7-dsp";
reg = <0x40800000 0x48000>,
<0x40e00000 0x8000>,
<0x40f00000 0x8000>;
reg-names = "l2ram", "l1pram", "l1dram";
ti,bootreg = <&scm_conf 0x55c 0>;
iommus = <&mmu0_dsp1>, <&mmu1_dsp1>;
mboxes = <&mailbox5 &mbox_dsp1_ipc3x>;
memory-region = <&dsp1_memory_region>;
ti,timers = <&timer5>;
ti,watchdog-timers = <&timer10>;
resets = <&prm_dsp1 0>;
clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>;
firmware-name = "dra7-dsp1-fw.xe66";
};
};