Documentation/devicetree/bindings/usb/snps,dwc3.yaml - linux/kernel/git/gregkh/driver-core - Git at Google

 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/usb/snps,dwc3.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#

 title: Synopsys DesignWare USB3 Controller

 maintainers:
   - Felipe Balbi <balbi@kernel.org>

 description:
   This is usually a subnode to DWC3 glue to which it is connected, but can also
   be presented as a standalone DT node with an optional vendor-specific
   compatible string.

 allOf:
   - $ref: usb-drd.yaml#
   - if:
       properties:
         dr_mode:
           const: peripheral

       required:
         - dr_mode
     then:
       $ref: usb.yaml#
     else:
       $ref: usb-xhci.yaml#

 properties:
   compatible:
     contains:
       oneOf:
         - const: snps,dwc3
         - const: synopsys,dwc3
           deprecated: true

   reg:
     maxItems: 1

   interrupts:
     description:
       It's either a single common DWC3 interrupt (dwc_usb3) or individual
       interrupts for the host, gadget and DRD modes.
     minItems: 1
     maxItems: 3

   interrupt-names:
     minItems: 1
     maxItems: 3
     oneOf:
       - const: dwc_usb3
       - items:
           enum: [host, peripheral, otg]

   clocks:
     description:
       In general the core supports three types of clocks. bus_early is a
       SoC Bus Clock (AHB/AXI/Native). ref generates ITP when the UTMI/ULPI
       PHY is suspended. suspend clocks a small part of the USB3 core when
       SS PHY in P3. But particular cases may differ from that having less
       or more clock sources with another names.

   clock-names:
     contains:
       anyOf:
         - enum: [bus_early, ref, suspend]
         - true

   dma-coherent: true

   iommus:
     maxItems: 1

   usb-phy:
     minItems: 1
     items:
       - description: USB2/HS PHY
       - description: USB3/SS PHY

   phys:
     minItems: 1
     maxItems: 2

   phy-names:
     minItems: 1
     maxItems: 2
     items:
       enum:
         - usb2-phy
         - usb3-phy

   resets:
     minItems: 1

   snps,usb2-lpm-disable:
     description: Indicate if we don't want to enable USB2 HW LPM for host
       mode.
     type: boolean

   snps,usb3_lpm_capable:
     description: Determines if platform is USB3 LPM capable
     type: boolean

   snps,usb2-gadget-lpm-disable:
     description: Indicate if we don't want to enable USB2 HW LPM for gadget
       mode.
     type: boolean

   snps,dis-start-transfer-quirk:
     description:
       When set, disable isoc START TRANSFER command failure SW work-around
       for DWC_usb31 version 1.70a-ea06 and prior.
     type: boolean

   snps,disable_scramble_quirk:
     description:
       True when SW should disable data scrambling. Only really useful for FPGA
       builds.
     type: boolean

   snps,has-lpm-erratum:
     description: True when DWC3 was configured with LPM Erratum enabled
     type: boolean

   snps,lpm-nyet-threshold:
     description: LPM NYET threshold
     $ref: /schemas/types.yaml#/definitions/uint8

   snps,u2exit_lfps_quirk:
     description: Set if we want to enable u2exit lfps quirk
     type: boolean

   snps,u2ss_inp3_quirk:
     description: Set if we enable P3 OK for U2/SS Inactive quirk
     type: boolean

   snps,req_p1p2p3_quirk:
     description:
       When set, the core will always request for P1/P2/P3 transition sequence.
     type: boolean

   snps,del_p1p2p3_quirk:
     description:
       When set core will delay P1/P2/P3 until a certain amount of 8B10B errors
       occur.
     type: boolean

   snps,del_phy_power_chg_quirk:
     description: When set core will delay PHY power change from P0 to P1/P2/P3.
     type: boolean

   snps,lfps_filter_quirk:
     description: When set core will filter LFPS reception.
     type: boolean

   snps,rx_detect_poll_quirk:
     description:
       when set core will disable a 400us delay to start Polling LFPS after
       RX.Detect.
     type: boolean

   snps,tx_de_emphasis_quirk:
     description: When set core will set Tx de-emphasis value
     type: boolean

   snps,tx_de_emphasis:
     description:
       The value driven to the PHY is controlled by the LTSSM during USB3
       Compliance mode.
     $ref: /schemas/types.yaml#/definitions/uint8
     enum:
       - 0 # -6dB de-emphasis
       - 1 # -3.5dB de-emphasis
       - 2 # No de-emphasis

   snps,dis_u3_susphy_quirk:
     description: When set core will disable USB3 suspend phy
     type: boolean

   snps,dis_u2_susphy_quirk:
     description: When set core will disable USB2 suspend phy
     type: boolean

   snps,dis_enblslpm_quirk:
     description:
       When set clears the enblslpm in GUSB2PHYCFG, disabling the suspend signal
       to the PHY.
     type: boolean

   snps,dis-u1-entry-quirk:
     description: Set if link entering into U1 needs to be disabled
     type: boolean

   snps,dis-u2-entry-quirk:
     description: Set if link entering into U2 needs to be disabled
     type: boolean

   snps,dis_rxdet_inp3_quirk:
     description:
       When set core will disable receiver detection in PHY P3 power state.
     type: boolean

   snps,dis-u2-freeclk-exists-quirk:
     description:
       When set, clear the u2_freeclk_exists in GUSB2PHYCFG, specify that USB2
       PHY doesn't provide a free-running PHY clock.
     type: boolean

   snps,dis-del-phy-power-chg-quirk:
     description:
       When set core will change PHY power from P0 to P1/P2/P3 without delay.
     type: boolean

   snps,dis-tx-ipgap-linecheck-quirk:
     description: When set, disable u2mac linestate check during HS transmit
     type: boolean

   snps,parkmode-disable-ss-quirk:
     description:
       When set, all SuperSpeed bus instances in park mode are disabled.
     type: boolean

   snps,dis_metastability_quirk:
     description:
       When set, disable metastability workaround. CAUTION! Use only if you are
       absolutely sure of it.
     type: boolean

   snps,dis-split-quirk:
     description:
       When set, change the way URBs are handled by the driver. Needed to
       avoid -EPROTO errors with usbhid on some devices (Hikey 970).
     type: boolean

   snps,is-utmi-l1-suspend:
     description:
       True when DWC3 asserts output signal utmi_l1_suspend_n, false when
       asserts utmi_sleep_n.
     type: boolean

   snps,hird-threshold:
     description: HIRD threshold
     $ref: /schemas/types.yaml#/definitions/uint8

   snps,hsphy_interface:
     description:
       High-Speed PHY interface selection between UTMI+ and ULPI when the
       DWC_USB3_HSPHY_INTERFACE has value 3.
     $ref: /schemas/types.yaml#/definitions/uint8
     enum: [utmi, ulpi]

   snps,quirk-frame-length-adjustment:
     description:
       Value for GFLADJ_30MHZ field of GFLADJ register for post-silicon frame
       length adjustment when the fladj_30mhz_sdbnd signal is invalid or
       incorrect.
     $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0x3f

   snps,ref-clock-period-ns:
     description:
       Value for REFCLKPER field of GUCTL register for reference clock period in
       nanoseconds, when the hardware set default does not match the actual
       clock.

       This binding is deprecated. Instead, provide an appropriate reference clock.
     minimum: 8
     maximum: 62
     deprecated: true

   snps,rx-thr-num-pkt-prd:
     description:
       Periodic ESS RX packet threshold count (host mode only). Set this and
       snps,rx-max-burst-prd to a valid, non-zero value 1-16 (DWC_usb31
       programming guide section 1.2.4) to enable periodic ESS RX threshold.
     $ref: /schemas/types.yaml#/definitions/uint8
     minimum: 1
     maximum: 16

   snps,rx-max-burst-prd:
     description:
       Max periodic ESS RX burst size (host mode only). Set this and
       snps,rx-thr-num-pkt-prd to a valid, non-zero value 1-16 (DWC_usb31
       programming guide section 1.2.4) to enable periodic ESS RX threshold.
     $ref: /schemas/types.yaml#/definitions/uint8
     minimum: 1
     maximum: 16

   snps,tx-thr-num-pkt-prd:
     description:
       Periodic ESS TX packet threshold count (host mode only). Set this and
       snps,tx-max-burst-prd to a valid, non-zero value 1-16 (DWC_usb31
       programming guide section 1.2.3) to enable periodic ESS TX threshold.
     $ref: /schemas/types.yaml#/definitions/uint8
     minimum: 1
     maximum: 16

   snps,tx-max-burst-prd:
     description:
       Max periodic ESS TX burst size (host mode only). Set this and
       snps,tx-thr-num-pkt-prd to a valid, non-zero value 1-16 (DWC_usb31
       programming guide section 1.2.3) to enable periodic ESS TX threshold.
     $ref: /schemas/types.yaml#/definitions/uint8
     minimum: 1
     maximum: 16

   tx-fifo-resize:
     description: Determines if the TX fifos can be dynamically resized depending
       on the number of IN endpoints used and if bursting is supported.  This
       may help improve bandwidth on platforms with higher system latencies, as
       increased fifo space allows for the controller to prefetch data into its
       internal memory.
     type: boolean

   tx-fifo-max-num:
     description: Specifies the max number of packets the txfifo resizing logic
       can account for when higher endpoint bursting is used. (bMaxBurst > 6) The
       higher the number, the more fifo space the txfifo resizing logic will
       allocate for that endpoint.
     $ref: /schemas/types.yaml#/definitions/uint8
     minimum: 3

   snps,incr-burst-type-adjustment:
     description:
       Value for INCR burst type of GSBUSCFG0 register, undefined length INCR
       burst type enable and INCRx type. A single value means INCRX burst mode
       enabled. If more than one value specified, undefined length INCR burst
       type will be enabled with burst lengths utilized up to the maximum
       of the values passed in this property.
     $ref: /schemas/types.yaml#/definitions/uint32-array
     minItems: 1
     maxItems: 8
     uniqueItems: true
     items:
       enum: [1, 4, 8, 16, 32, 64, 128, 256]

   port:
     $ref: /schemas/graph.yaml#/properties/port
     description:
       This port is used with the 'usb-role-switch' property  to connect the
       dwc3 to type C connector.

 unevaluatedProperties: false

 required:
   - compatible
   - reg
   - interrupts

 examples:
   - |
     usb@4a030000 {
       compatible = "snps,dwc3";
       reg = <0x4a030000 0xcfff>;
       interrupts = <0 92 4>;
       usb-phy = <&usb2_phy>, <&usb3_phy>;
       snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
     };
   - |
     usb@4a000000 {
       compatible = "snps,dwc3";
       reg = <0x4a000000 0xcfff>;
       interrupts = <0 92 4>;
       clocks = <&clk 1>, <&clk 2>, <&clk 3>;
       clock-names = "bus_early", "ref", "suspend";
       phys = <&usb2_phy>, <&usb3_phy>;
       phy-names = "usb2-phy", "usb3-phy";
       snps,dis_u2_susphy_quirk;
       snps,dis_enblslpm_quirk;
     };
 ...
	# SPDX-License-Identifier: GPL-2.0
	%YAML 1.2
	---
	$id: http://devicetree.org/schemas/usb/snps,dwc3.yaml#
	$schema: http://devicetree.org/meta-schemas/core.yaml#

	title: Synopsys DesignWare USB3 Controller

	maintainers:
	- Felipe Balbi <balbi@kernel.org>

	description:
	This is usually a subnode to DWC3 glue to which it is connected, but can also
	be presented as a standalone DT node with an optional vendor-specific
	compatible string.

	allOf:
	- $ref: usb-drd.yaml#
	- if:
	properties:
	dr_mode:
	const: peripheral

	required:
	- dr_mode
	then:
	$ref: usb.yaml#
	else:
	$ref: usb-xhci.yaml#

	properties:
	compatible:
	contains:
	oneOf:
	- const: snps,dwc3
	- const: synopsys,dwc3
	deprecated: true

	reg:
	maxItems: 1

	interrupts:
	description:
	It's either a single common DWC3 interrupt (dwc_usb3) or individual
	interrupts for the host, gadget and DRD modes.
	minItems: 1
	maxItems: 3

	interrupt-names:
	minItems: 1
	maxItems: 3
	oneOf:
	- const: dwc_usb3
	- items:
	enum: [host, peripheral, otg]

	clocks:
	description:
	In general the core supports three types of clocks. bus_early is a
	SoC Bus Clock (AHB/AXI/Native). ref generates ITP when the UTMI/ULPI
	PHY is suspended. suspend clocks a small part of the USB3 core when
	SS PHY in P3. But particular cases may differ from that having less
	or more clock sources with another names.

	clock-names:
	contains:
	anyOf:
	- enum: [bus_early, ref, suspend]
	- true

	dma-coherent: true

	iommus:
	maxItems: 1

	usb-phy:
	minItems: 1
	items:
	- description: USB2/HS PHY
	- description: USB3/SS PHY

	phys:
	minItems: 1
	maxItems: 2

	phy-names:
	minItems: 1
	maxItems: 2
	items:
	enum:
	- usb2-phy
	- usb3-phy

	resets:
	minItems: 1

	snps,usb2-lpm-disable:
	description: Indicate if we don't want to enable USB2 HW LPM for host
	mode.
	type: boolean

	snps,usb3_lpm_capable:
	description: Determines if platform is USB3 LPM capable
	type: boolean

	snps,usb2-gadget-lpm-disable:
	description: Indicate if we don't want to enable USB2 HW LPM for gadget
	mode.
	type: boolean

	snps,dis-start-transfer-quirk:
	description:
	When set, disable isoc START TRANSFER command failure SW work-around
	for DWC_usb31 version 1.70a-ea06 and prior.
	type: boolean

	snps,disable_scramble_quirk:
	description:
	True when SW should disable data scrambling. Only really useful for FPGA
	builds.
	type: boolean

	snps,has-lpm-erratum:
	description: True when DWC3 was configured with LPM Erratum enabled
	type: boolean

	snps,lpm-nyet-threshold:
	description: LPM NYET threshold
	$ref: /schemas/types.yaml#/definitions/uint8

	snps,u2exit_lfps_quirk:
	description: Set if we want to enable u2exit lfps quirk
	type: boolean

	snps,u2ss_inp3_quirk:
	description: Set if we enable P3 OK for U2/SS Inactive quirk
	type: boolean

	snps,req_p1p2p3_quirk:
	description:
	When set, the core will always request for P1/P2/P3 transition sequence.
	type: boolean

	snps,del_p1p2p3_quirk:
	description:
	When set core will delay P1/P2/P3 until a certain amount of 8B10B errors
	occur.
	type: boolean

	snps,del_phy_power_chg_quirk:
	description: When set core will delay PHY power change from P0 to P1/P2/P3.
	type: boolean

	snps,lfps_filter_quirk:
	description: When set core will filter LFPS reception.
	type: boolean

	snps,rx_detect_poll_quirk:
	description:
	when set core will disable a 400us delay to start Polling LFPS after
	RX.Detect.
	type: boolean

	snps,tx_de_emphasis_quirk:
	description: When set core will set Tx de-emphasis value
	type: boolean

	snps,tx_de_emphasis:
	description:
	The value driven to the PHY is controlled by the LTSSM during USB3
	Compliance mode.
	$ref: /schemas/types.yaml#/definitions/uint8
	enum:
	- 0 # -6dB de-emphasis
	- 1 # -3.5dB de-emphasis
	- 2 # No de-emphasis

	snps,dis_u3_susphy_quirk:
	description: When set core will disable USB3 suspend phy
	type: boolean

	snps,dis_u2_susphy_quirk:
	description: When set core will disable USB2 suspend phy
	type: boolean

	snps,dis_enblslpm_quirk:
	description:
	When set clears the enblslpm in GUSB2PHYCFG, disabling the suspend signal
	to the PHY.
	type: boolean

	snps,dis-u1-entry-quirk:
	description: Set if link entering into U1 needs to be disabled
	type: boolean

	snps,dis-u2-entry-quirk:
	description: Set if link entering into U2 needs to be disabled
	type: boolean

	snps,dis_rxdet_inp3_quirk:
	description:
	When set core will disable receiver detection in PHY P3 power state.
	type: boolean

	snps,dis-u2-freeclk-exists-quirk:
	description:
	When set, clear the u2_freeclk_exists in GUSB2PHYCFG, specify that USB2
	PHY doesn't provide a free-running PHY clock.
	type: boolean

	snps,dis-del-phy-power-chg-quirk:
	description:
	When set core will change PHY power from P0 to P1/P2/P3 without delay.
	type: boolean

	snps,dis-tx-ipgap-linecheck-quirk:
	description: When set, disable u2mac linestate check during HS transmit
	type: boolean

	snps,parkmode-disable-ss-quirk:
	description:
	When set, all SuperSpeed bus instances in park mode are disabled.
	type: boolean

	snps,dis_metastability_quirk:
	description:
	When set, disable metastability workaround. CAUTION! Use only if you are
	absolutely sure of it.
	type: boolean

	snps,dis-split-quirk:
	description:
	When set, change the way URBs are handled by the driver. Needed to
	avoid -EPROTO errors with usbhid on some devices (Hikey 970).
	type: boolean

	snps,is-utmi-l1-suspend:
	description:
	True when DWC3 asserts output signal utmi_l1_suspend_n, false when
	asserts utmi_sleep_n.
	type: boolean

	snps,hird-threshold:
	description: HIRD threshold
	$ref: /schemas/types.yaml#/definitions/uint8

	snps,hsphy_interface:
	description:
	High-Speed PHY interface selection between UTMI+ and ULPI when the
	DWC_USB3_HSPHY_INTERFACE has value 3.
	$ref: /schemas/types.yaml#/definitions/uint8
	enum: [utmi, ulpi]

	snps,quirk-frame-length-adjustment:
	description:
	Value for GFLADJ_30MHZ field of GFLADJ register for post-silicon frame
	length adjustment when the fladj_30mhz_sdbnd signal is invalid or
	incorrect.
	$ref: /schemas/types.yaml#/definitions/uint32
	minimum: 0
	maximum: 0x3f

	snps,ref-clock-period-ns:
	description:
	Value for REFCLKPER field of GUCTL register for reference clock period in
	nanoseconds, when the hardware set default does not match the actual
	clock.

	This binding is deprecated. Instead, provide an appropriate reference clock.
	minimum: 8
	maximum: 62
	deprecated: true

	snps,rx-thr-num-pkt-prd:
	description:
	Periodic ESS RX packet threshold count (host mode only). Set this and
	snps,rx-max-burst-prd to a valid, non-zero value 1-16 (DWC_usb31
	programming guide section 1.2.4) to enable periodic ESS RX threshold.
	$ref: /schemas/types.yaml#/definitions/uint8
	minimum: 1
	maximum: 16

	snps,rx-max-burst-prd:
	description:
	Max periodic ESS RX burst size (host mode only). Set this and
	snps,rx-thr-num-pkt-prd to a valid, non-zero value 1-16 (DWC_usb31
	programming guide section 1.2.4) to enable periodic ESS RX threshold.
	$ref: /schemas/types.yaml#/definitions/uint8
	minimum: 1
	maximum: 16

	snps,tx-thr-num-pkt-prd:
	description:
	Periodic ESS TX packet threshold count (host mode only). Set this and
	snps,tx-max-burst-prd to a valid, non-zero value 1-16 (DWC_usb31
	programming guide section 1.2.3) to enable periodic ESS TX threshold.
	$ref: /schemas/types.yaml#/definitions/uint8
	minimum: 1
	maximum: 16

	snps,tx-max-burst-prd:
	description:
	Max periodic ESS TX burst size (host mode only). Set this and
	snps,tx-thr-num-pkt-prd to a valid, non-zero value 1-16 (DWC_usb31
	programming guide section 1.2.3) to enable periodic ESS TX threshold.
	$ref: /schemas/types.yaml#/definitions/uint8
	minimum: 1
	maximum: 16

	tx-fifo-resize:
	description: Determines if the TX fifos can be dynamically resized depending
	on the number of IN endpoints used and if bursting is supported. This
	may help improve bandwidth on platforms with higher system latencies, as
	increased fifo space allows for the controller to prefetch data into its
	internal memory.
	type: boolean

	tx-fifo-max-num:
	description: Specifies the max number of packets the txfifo resizing logic
	can account for when higher endpoint bursting is used. (bMaxBurst > 6) The
	higher the number, the more fifo space the txfifo resizing logic will
	allocate for that endpoint.
	$ref: /schemas/types.yaml#/definitions/uint8
	minimum: 3

	snps,incr-burst-type-adjustment:
	description:
	Value for INCR burst type of GSBUSCFG0 register, undefined length INCR
	burst type enable and INCRx type. A single value means INCRX burst mode
	enabled. If more than one value specified, undefined length INCR burst
	type will be enabled with burst lengths utilized up to the maximum
	of the values passed in this property.
	$ref: /schemas/types.yaml#/definitions/uint32-array
	minItems: 1
	maxItems: 8
	uniqueItems: true
	items:
	enum: [1, 4, 8, 16, 32, 64, 128, 256]

	port:
	$ref: /schemas/graph.yaml#/properties/port
	description:
	This port is used with the 'usb-role-switch' property to connect the
	dwc3 to type C connector.

	unevaluatedProperties: false

	required:
	- compatible
	- reg
	- interrupts

	examples:
	- \|
	usb@4a030000 {
	compatible = "snps,dwc3";
	reg = <0x4a030000 0xcfff>;
	interrupts = <0 92 4>;
	usb-phy = <&usb2_phy>, <&usb3_phy>;
	snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
	};
	- \|
	usb@4a000000 {
	compatible = "snps,dwc3";
	reg = <0x4a000000 0xcfff>;
	interrupts = <0 92 4>;
	clocks = <&clk 1>, <&clk 2>, <&clk 3>;
	clock-names = "bus_early", "ref", "suspend";
	phys = <&usb2_phy>, <&usb3_phy>;
	phy-names = "usb2-phy", "usb3-phy";
	snps,dis_u2_susphy_quirk;
	snps,dis_enblslpm_quirk;
	};
	...