arch/m68knommu/platform/68VZ328/ucdimm/config.c

/*
 *  linux/arch/m68knommu/platform/68VZ328/ucdimm/config.c
 *
 *  Copyright (C) 1993 Hamish Macdonald
 *  Copyright (C) 1999 D. Jeff Dionne
 *
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file COPYING in the main directory of this archive
 * for more details.
 */

#include <stdarg.h>
#include <linux/config.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/tty.h>
#include <linux/console.h>

#include <asm/setup.h>
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/irq.h>
#include <asm/machdep.h>
#include <asm/MC68VZ328.h>
#include <asm/bootstd.h>

void BSP_sched_init(void (*timer_routine)(int, void *, struct pt_regs *))
{
	/* Restart mode, Enable int, 32KHz, Enable timer */
	TCTL = TCTL_OM | TCTL_IRQEN | TCTL_CLKSOURCE_32KHZ | TCTL_TEN;
	/* Set prescaler (Divide 32KHz by 32)*/
	TPRER = 31;
	/* Set compare register  32Khz / 32 / 10 = 100 */
	TCMP = 10;                                                              

	request_irq(TMR_IRQ_NUM, timer_routine, IRQ_FLG_LOCK, "timer", NULL);
}

void BSP_tick(void)
{
  	/* Reset Timer1 */
	TSTAT &= 0;
}

unsigned long BSP_gettimeoffset (void)
{
	return 0;
}

void BSP_gettod (int *yearp, int *monp, int *dayp,
		   int *hourp, int *minp, int *secp)
{
}

int BSP_hwclk(int op, struct hwclk_time *t)
{
	if (!op) {
		/* read */
	} else {
		/* write */
	}
	return 0;
}

int BSP_set_clock_mmss (unsigned long nowtime)
{
#if 0
	short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60;

	tod->second1 = real_seconds / 10;
	tod->second2 = real_seconds % 10;
	tod->minute1 = real_minutes / 10;
	tod->minute2 = real_minutes % 10;
#endif
	return 0;
}

void BSP_reset (void)
{
	local_irq_disable();
	asm volatile ("
		moveal #0x10c00000, %a0;
		moveb #0, 0xFFFFF300;
		moveal 0(%a0), %sp;
		moveal 4(%a0), %a0;
		jmp (%a0);
	");
}

unsigned char *cs8900a_hwaddr;
static int errno;

_bsc0(char *, getserialnum)
_bsc1(unsigned char *, gethwaddr, int, a)
_bsc1(char *, getbenv, char *, a)

void config_BSP(char *command, int len)
{
	unsigned char *p;

	printk(KERN_INFO "\n68VZ328 DragonBallVZ support (c) 2001 Lineo, Inc.\n");

	printk(KERN_INFO "uCdimm serial string [%s]\n",getserialnum());
	p = cs8900a_hwaddr = gethwaddr(0);
	printk(KERN_INFO "uCdimm hwaddr %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
		p[0], p[1], p[2], p[3], p[4], p[5]);
	p = getbenv("APPEND");
	if (p) strcpy(p,command);
	else command[0] = 0;
 
	mach_sched_init      = BSP_sched_init;
	mach_tick            = BSP_tick;
	mach_gettimeoffset   = BSP_gettimeoffset;
	mach_gettod          = BSP_gettod;
	mach_reset           = BSP_reset;
}