| #include <linux/config.h> |
| #include "arlan.h" |
| |
| #include <linux/sysctl.h> |
| |
| #ifdef CONFIG_PROC_FS |
| |
| /* void enableReceive(struct net_device* dev); |
| */ |
| |
| |
| |
| #define ARLAN_STR_SIZE 0x2ff0 |
| #define DEV_ARLAN_INFO 1 |
| #define DEV_ARLAN 1 |
| #define SARLG(type,var) {\ |
| pos += sprintf(arlan_drive_info+pos, "%s\t=\t0x%x\n", #var, READSHMB(priva->card->var)); \ |
| } |
| |
| #define SARLBN(type,var,nn) {\ |
| pos += sprintf(arlan_drive_info+pos, "%s\t=\t0x",#var);\ |
| for (i=0; i < nn; i++ ) pos += sprintf(arlan_drive_info+pos, "%02x",READSHMB(priva->card->var[i]));\ |
| pos += sprintf(arlan_drive_info+pos, "\n"); \ |
| } |
| |
| #define SARLBNpln(type,var,nn) {\ |
| for (i=0; i < nn; i++ ) pos += sprintf(arlan_drive_info+pos, "%02x",READSHMB(priva->card->var[i]));\ |
| } |
| |
| #define SARLSTR(var,nn) {\ |
| char tmpStr[400];\ |
| int tmpLn = nn;\ |
| if (nn > 399 ) tmpLn = 399; \ |
| memcpy(tmpStr,(char *) priva->conf->var,tmpLn);\ |
| tmpStr[tmpLn] = 0; \ |
| pos += sprintf(arlan_drive_info+pos, "%s\t=\t%s \n",#var,priva->conf->var);\ |
| } |
| |
| #define SARLUC(var) SARLG(u_char, var) |
| #define SARLUCN(var,nn) SARLBN(u_char,var, nn) |
| #define SARLUS(var) SARLG(u_short, var) |
| #define SARLUSN(var,nn) SARLBN(u_short,var, nn) |
| #define SARLUI(var) SARLG(u_int, var) |
| |
| #define SARLUSA(var) {\ |
| u_short tmpVar;\ |
| memcpy(&tmpVar, (short *) priva->conf->var,2); \ |
| pos += sprintf(arlan_drive_info+pos, "%s\t=\t0x%x\n",#var, tmpVar);\ |
| } |
| |
| #define SARLUIA(var) {\ |
| u_int tmpVar;\ |
| memcpy(&tmpVar, (int* )priva->conf->var,4); \ |
| pos += sprintf(arlan_drive_info+pos, "%s\t=\t0x%x\n",#var, tmpVar);\ |
| } |
| |
| |
| static const char *arlan_diagnostic_info_string(struct net_device *dev) |
| { |
| |
| struct arlan_private *priv = netdev_priv(dev); |
| volatile struct arlan_shmem __iomem *arlan = priv->card; |
| u_char diagnosticInfo; |
| |
| READSHM(diagnosticInfo, arlan->diagnosticInfo, u_char); |
| |
| switch (diagnosticInfo) |
| { |
| case 0xFF: |
| return "Diagnostic info is OK"; |
| case 0xFE: |
| return "ERROR EPROM Checksum error "; |
| case 0xFD: |
| return "ERROR Local Ram Test Failed "; |
| case 0xFC: |
| return "ERROR SCC failure "; |
| case 0xFB: |
| return "ERROR BackBone failure "; |
| case 0xFA: |
| return "ERROR transceiver not found "; |
| case 0xF9: |
| return "ERROR no more address space "; |
| case 0xF8: |
| return "ERROR Checksum error "; |
| case 0xF7: |
| return "ERROR Missing SS Code"; |
| case 0xF6: |
| return "ERROR Invalid config format"; |
| case 0xF5: |
| return "ERROR Reserved errorcode F5"; |
| case 0xF4: |
| return "ERROR Invalid spreading code/channel number"; |
| case 0xF3: |
| return "ERROR Load Code Error"; |
| case 0xF2: |
| return "ERROR Reserver errorcode F2 "; |
| case 0xF1: |
| return "ERROR Invalid command receivec by LAN card "; |
| case 0xF0: |
| return "ERROR Invalid parameter found in command "; |
| case 0xEF: |
| return "ERROR On-chip timer failure "; |
| case 0xEE: |
| return "ERROR T410 timer failure "; |
| case 0xED: |
| return "ERROR Too Many TxEnable commands "; |
| case 0xEC: |
| return "ERROR EEPROM error on radio module "; |
| default: |
| return "ERROR unknown Diagnostic info reply code "; |
| } |
| } |
| |
| static const char *arlan_hardware_type_string(struct net_device *dev) |
| { |
| u_char hardwareType; |
| struct arlan_private *priv = netdev_priv(dev); |
| volatile struct arlan_shmem __iomem *arlan = priv->card; |
| |
| READSHM(hardwareType, arlan->hardwareType, u_char); |
| switch (hardwareType) |
| { |
| case 0x00: |
| return "type A450"; |
| case 0x01: |
| return "type A650 "; |
| case 0x04: |
| return "type TMA coproc"; |
| case 0x0D: |
| return "type A650E "; |
| case 0x18: |
| return "type TMA coproc Australian"; |
| case 0x19: |
| return "type A650A "; |
| case 0x26: |
| return "type TMA coproc European"; |
| case 0x2E: |
| return "type A655 "; |
| case 0x2F: |
| return "type A655A "; |
| case 0x30: |
| return "type A655E "; |
| case 0x0B: |
| return "type A670 "; |
| case 0x0C: |
| return "type A670E "; |
| case 0x2D: |
| return "type A670A "; |
| case 0x0F: |
| return "type A411T"; |
| case 0x16: |
| return "type A411TA"; |
| case 0x1B: |
| return "type A440T"; |
| case 0x1C: |
| return "type A412T"; |
| case 0x1E: |
| return "type A412TA"; |
| case 0x22: |
| return "type A411TE"; |
| case 0x24: |
| return "type A412TE"; |
| case 0x27: |
| return "type A671T "; |
| case 0x29: |
| return "type A671TA "; |
| case 0x2B: |
| return "type A671TE "; |
| case 0x31: |
| return "type A415T "; |
| case 0x33: |
| return "type A415TA "; |
| case 0x35: |
| return "type A415TE "; |
| case 0x37: |
| return "type A672"; |
| case 0x39: |
| return "type A672A "; |
| case 0x3B: |
| return "type A672T"; |
| case 0x6B: |
| return "type IC2200"; |
| default: |
| return "type A672T"; |
| } |
| } |
| #ifdef ARLAN_DEBUGGING |
| static void arlan_print_diagnostic_info(struct net_device *dev) |
| { |
| int i; |
| u_char diagnosticInfo; |
| u_short diagnosticOffset; |
| u_char hardwareType; |
| struct arlan_private *priv = netdev_priv(dev); |
| volatile struct arlan_shmem __iomem *arlan = priv->card; |
| |
| // ARLAN_DEBUG_ENTRY("arlan_print_diagnostic_info"); |
| |
| if (READSHMB(arlan->configuredStatusFlag) == 0) |
| printk("Arlan: Card NOT configured\n"); |
| else |
| printk("Arlan: Card is configured\n"); |
| |
| READSHM(diagnosticInfo, arlan->diagnosticInfo, u_char); |
| READSHM(diagnosticOffset, arlan->diagnosticOffset, u_short); |
| |
| printk(KERN_INFO "%s\n", arlan_diagnostic_info_string(dev)); |
| |
| if (diagnosticInfo != 0xff) |
| printk("%s arlan: Diagnostic Offset %d \n", dev->name, diagnosticOffset); |
| |
| printk("arlan: LAN CODE ID = "); |
| for (i = 0; i < 6; i++) |
| DEBUGSHM(1, "%03d:", arlan->lanCardNodeId[i], u_char); |
| printk("\n"); |
| |
| printk("arlan: Arlan BroadCast address = "); |
| for (i = 0; i < 6; i++) |
| DEBUGSHM(1, "%03d:", arlan->broadcastAddress[i], u_char); |
| printk("\n"); |
| |
| READSHM(hardwareType, arlan->hardwareType, u_char); |
| printk(KERN_INFO "%s\n", arlan_hardware_type_string(dev)); |
| |
| |
| DEBUGSHM(1, "arlan: channelNumber=%d\n", arlan->channelNumber, u_char); |
| DEBUGSHM(1, "arlan: channelSet=%d\n", arlan->channelSet, u_char); |
| DEBUGSHM(1, "arlan: spreadingCode=%d\n", arlan->spreadingCode, u_char); |
| DEBUGSHM(1, "arlan: radioNodeId=%d\n", arlan->radioNodeId, u_short); |
| DEBUGSHM(1, "arlan: SID =%d\n", arlan->SID, u_short); |
| DEBUGSHM(1, "arlan: rxOffset=%d\n", arlan->rxOffset, u_short); |
| |
| DEBUGSHM(1, "arlan: registration mode is %d\n", arlan->registrationMode, u_char); |
| |
| printk("arlan: name= "); |
| IFDEBUG(1) |
| |
| for (i = 0; i < 16; i++) |
| { |
| char c; |
| READSHM(c, arlan->name[i], char); |
| if (c) |
| printk("%c", c); |
| } |
| printk("\n"); |
| |
| // ARLAN_DEBUG_EXIT("arlan_print_diagnostic_info"); |
| |
| } |
| |
| |
| /****************************** TEST MEMORY **************/ |
| |
| static int arlan_hw_test_memory(struct net_device *dev) |
| { |
| u_char *ptr; |
| int i; |
| int memlen = sizeof(struct arlan_shmem) - 0xF; /* avoid control register */ |
| volatile char *arlan_mem = (char *) (dev->mem_start); |
| struct arlan_private *priv = netdev_priv(dev); |
| volatile struct arlan_shmem __iomem *arlan = priv->card; |
| char pattern; |
| |
| ptr = NULL; |
| |
| /* hold card in reset state */ |
| setHardwareReset(dev); |
| |
| /* test memory */ |
| pattern = 0; |
| for (i = 0; i < memlen; i++) |
| WRITESHM(arlan_mem[i], ((u_char) pattern++), u_char); |
| |
| pattern = 0; |
| for (i = 0; i < memlen; i++) |
| { |
| char res; |
| READSHM(res, arlan_mem[i], char); |
| if (res != pattern++) |
| { |
| printk(KERN_ERR "Arlan driver memory test 1 failed \n"); |
| return -1; |
| } |
| } |
| |
| pattern = 0; |
| for (i = 0; i < memlen; i++) |
| WRITESHM(arlan_mem[i], ~(pattern++), char); |
| |
| pattern = 0; |
| for (i = 0; i < memlen; i++) |
| { |
| char res; |
| READSHM(res, arlan_mem[i], char); |
| if (res != ~(pattern++)) |
| { |
| printk(KERN_ERR "Arlan driver memory test 2 failed \n"); |
| return -1; |
| } |
| } |
| |
| /* zero memory */ |
| for (i = 0; i < memlen; i++) |
| WRITESHM(arlan_mem[i], 0x00, char); |
| |
| IFDEBUG(1) printk(KERN_INFO "Arlan: memory tests ok\n"); |
| |
| /* set reset flag and then release reset */ |
| WRITESHM(arlan->resetFlag, 0xff, u_char); |
| |
| clearChannelAttention(dev); |
| clearHardwareReset(dev); |
| |
| /* wait for reset flag to become zero, we'll wait for two seconds */ |
| if (arlan_command(dev, ARLAN_COMMAND_LONG_WAIT_NOW)) |
| { |
| printk(KERN_ERR "%s arlan: failed to come back from memory test\n", dev->name); |
| return -1; |
| } |
| return 0; |
| } |
| |
| static int arlan_setup_card_by_book(struct net_device *dev) |
| { |
| u_char irqLevel, configuredStatusFlag; |
| struct arlan_private *priv = netdev_priv(dev); |
| volatile struct arlan_shmem __iomem *arlan = priv->card; |
| |
| // ARLAN_DEBUG_ENTRY("arlan_setup_card"); |
| |
| READSHM(configuredStatusFlag, arlan->configuredStatusFlag, u_char); |
| |
| IFDEBUG(10) |
| if (configuredStatusFlag != 0) |
| IFDEBUG(10) printk("arlan: CARD IS CONFIGURED\n"); |
| else |
| IFDEBUG(10) printk("arlan: card is NOT configured\n"); |
| |
| if (testMemory || (READSHMB(arlan->diagnosticInfo) != 0xff)) |
| if (arlan_hw_test_memory(dev)) |
| return -1; |
| |
| DEBUGSHM(4, "arlan configuredStatus = %d \n", arlan->configuredStatusFlag, u_char); |
| DEBUGSHM(4, "arlan driver diagnostic: 0x%2x\n", arlan->diagnosticInfo, u_char); |
| |
| /* issue nop command - no interrupt */ |
| arlan_command(dev, ARLAN_COMMAND_NOOP); |
| if (arlan_command(dev, ARLAN_COMMAND_WAIT_NOW) != 0) |
| return -1; |
| |
| IFDEBUG(50) printk("1st Noop successfully executed !!\n"); |
| |
| /* try to turn on the arlan interrupts */ |
| clearClearInterrupt(dev); |
| setClearInterrupt(dev); |
| setInterruptEnable(dev); |
| |
| /* issue nop command - with interrupt */ |
| |
| arlan_command(dev, ARLAN_COMMAND_NOOPINT); |
| if (arlan_command(dev, ARLAN_COMMAND_WAIT_NOW) != 0) |
| return -1; |
| |
| |
| IFDEBUG(50) printk("2nd Noop successfully executed !!\n"); |
| |
| READSHM(irqLevel, arlan->irqLevel, u_char) |
| |
| if (irqLevel != dev->irq) |
| { |
| IFDEBUG(1) printk(KERN_WARNING "arlan dip switches set irq to %d\n", irqLevel); |
| printk(KERN_WARNING "device driver irq set to %d - does not match\n", dev->irq); |
| dev->irq = irqLevel; |
| } |
| else |
| IFDEBUG(2) printk("irq level is OK\n"); |
| |
| |
| IFDEBUG(3) arlan_print_diagnostic_info(dev); |
| |
| arlan_command(dev, ARLAN_COMMAND_CONF); |
| |
| READSHM(configuredStatusFlag, arlan->configuredStatusFlag, u_char); |
| if (configuredStatusFlag == 0) |
| { |
| printk(KERN_WARNING "arlan configure failed\n"); |
| return -1; |
| } |
| arlan_command(dev, ARLAN_COMMAND_LONG_WAIT_NOW); |
| arlan_command(dev, ARLAN_COMMAND_RX); |
| arlan_command(dev, ARLAN_COMMAND_LONG_WAIT_NOW); |
| printk(KERN_NOTICE "%s: arlan driver version %s loaded\n", |
| dev->name, arlan_version); |
| |
| // ARLAN_DEBUG_EXIT("arlan_setup_card"); |
| |
| return 0; /* no errors */ |
| } |
| #endif |
| |
| #ifdef ARLAN_PROC_INTERFACE |
| #ifdef ARLAN_PROC_SHM_DUMP |
| |
| static char arlan_drive_info[ARLAN_STR_SIZE] = "A655\n\0"; |
| |
| static int arlan_sysctl_info(ctl_table * ctl, int write, struct file *filp, |
| void __user *buffer, size_t * lenp, loff_t *ppos) |
| { |
| int i; |
| int retv, pos, devnum; |
| struct arlan_private *priva = NULL; |
| struct net_device *dev; |
| pos = 0; |
| if (write) |
| { |
| printk("wrirte: "); |
| for (i = 0; i < 100; i++) |
| printk("adi %x \n", arlan_drive_info[i]); |
| } |
| if (ctl->procname == NULL || arlan_drive_info == NULL) |
| { |
| printk(KERN_WARNING " procname is NULL in sysctl_table or arlan_drive_info is NULL \n at arlan module\n "); |
| return -1; |
| } |
| devnum = ctl->procname[5] - '0'; |
| if (devnum < 0 || devnum > MAX_ARLANS - 1) |
| { |
| printk(KERN_WARNING "too strange devnum in procfs parse\n "); |
| return -1; |
| } |
| else if (arlan_device[devnum] == NULL) |
| { |
| if (ctl->procname) |
| pos += sprintf(arlan_drive_info + pos, "\t%s\n\n", ctl->procname); |
| pos += sprintf(arlan_drive_info + pos, "No device found here \n"); |
| goto final; |
| } |
| else |
| priva = arlan_device[devnum]->priv; |
| |
| if (priva == NULL) |
| { |
| printk(KERN_WARNING " Could not find the device private in arlan procsys, bad\n "); |
| return -1; |
| } |
| dev = arlan_device[devnum]; |
| |
| memcpy_fromio(priva->conf, priva->card, sizeof(struct arlan_shmem)); |
| |
| pos = sprintf(arlan_drive_info, "Arlan info \n"); |
| /* Header Signature */ |
| SARLSTR(textRegion, 48); |
| SARLUC(resetFlag); |
| pos += sprintf(arlan_drive_info + pos, "diagnosticInfo\t=\t%s \n", arlan_diagnostic_info_string(dev)); |
| SARLUC(diagnosticInfo); |
| SARLUS(diagnosticOffset); |
| SARLUCN(_1, 12); |
| SARLUCN(lanCardNodeId, 6); |
| SARLUCN(broadcastAddress, 6); |
| pos += sprintf(arlan_drive_info + pos, "hardwareType =\t %s \n", arlan_hardware_type_string(dev)); |
| SARLUC(hardwareType); |
| SARLUC(majorHardwareVersion); |
| SARLUC(minorHardwareVersion); |
| SARLUC(radioModule); |
| SARLUC(defaultChannelSet); |
| SARLUCN(_2, 47); |
| |
| /* Control/Status Block - 0x0080 */ |
| SARLUC(interruptInProgress); |
| SARLUC(cntrlRegImage); |
| |
| SARLUCN(_3, 14); |
| SARLUC(commandByte); |
| SARLUCN(commandParameter, 15); |
| |
| /* Receive Status - 0x00a0 */ |
| SARLUC(rxStatus); |
| SARLUC(rxFrmType); |
| SARLUS(rxOffset); |
| SARLUS(rxLength); |
| SARLUCN(rxSrc, 6); |
| SARLUC(rxBroadcastFlag); |
| SARLUC(rxQuality); |
| SARLUC(scrambled); |
| SARLUCN(_4, 1); |
| |
| /* Transmit Status - 0x00b0 */ |
| SARLUC(txStatus); |
| SARLUC(txAckQuality); |
| SARLUC(numRetries); |
| SARLUCN(_5, 14); |
| SARLUCN(registeredRouter, 6); |
| SARLUCN(backboneRouter, 6); |
| SARLUC(registrationStatus); |
| SARLUC(configuredStatusFlag); |
| SARLUCN(_6, 1); |
| SARLUCN(ultimateDestAddress, 6); |
| SARLUCN(immedDestAddress, 6); |
| SARLUCN(immedSrcAddress, 6); |
| SARLUS(rxSequenceNumber); |
| SARLUC(assignedLocaltalkAddress); |
| SARLUCN(_7, 27); |
| |
| /* System Parameter Block */ |
| |
| /* - Driver Parameters (Novell Specific) */ |
| |
| SARLUS(txTimeout); |
| SARLUS(transportTime); |
| SARLUCN(_8, 4); |
| |
| /* - Configuration Parameters */ |
| SARLUC(irqLevel); |
| SARLUC(spreadingCode); |
| SARLUC(channelSet); |
| SARLUC(channelNumber); |
| SARLUS(radioNodeId); |
| SARLUCN(_9, 2); |
| SARLUC(scramblingDisable); |
| SARLUC(radioType); |
| SARLUS(routerId); |
| SARLUCN(_10, 9); |
| SARLUC(txAttenuation); |
| SARLUIA(systemId); |
| SARLUS(globalChecksum); |
| SARLUCN(_11, 4); |
| SARLUS(maxDatagramSize); |
| SARLUS(maxFrameSize); |
| SARLUC(maxRetries); |
| SARLUC(receiveMode); |
| SARLUC(priority); |
| SARLUC(rootOrRepeater); |
| SARLUCN(specifiedRouter, 6); |
| SARLUS(fastPollPeriod); |
| SARLUC(pollDecay); |
| SARLUSA(fastPollDelay); |
| SARLUC(arlThreshold); |
| SARLUC(arlDecay); |
| SARLUCN(_12, 1); |
| SARLUS(specRouterTimeout); |
| SARLUCN(_13, 5); |
| |
| /* Scrambled Area */ |
| SARLUIA(SID); |
| SARLUCN(encryptionKey, 12); |
| SARLUIA(_14); |
| SARLUSA(waitTime); |
| SARLUSA(lParameter); |
| SARLUCN(_15, 3); |
| SARLUS(headerSize); |
| SARLUS(sectionChecksum); |
| |
| SARLUC(registrationMode); |
| SARLUC(registrationFill); |
| SARLUS(pollPeriod); |
| SARLUS(refreshPeriod); |
| SARLSTR(name, 16); |
| SARLUCN(NID, 6); |
| SARLUC(localTalkAddress); |
| SARLUC(codeFormat); |
| SARLUC(numChannels); |
| SARLUC(channel1); |
| SARLUC(channel2); |
| SARLUC(channel3); |
| SARLUC(channel4); |
| SARLUCN(SSCode, 59); |
| |
| /* SARLUCN( _16, 0x140); |
| */ |
| /* Statistics Block - 0x0300 */ |
| SARLUC(hostcpuLock); |
| SARLUC(lancpuLock); |
| SARLUCN(resetTime, 18); |
| SARLUIA(numDatagramsTransmitted); |
| SARLUIA(numReTransmissions); |
| SARLUIA(numFramesDiscarded); |
| SARLUIA(numDatagramsReceived); |
| SARLUIA(numDuplicateReceivedFrames); |
| SARLUIA(numDatagramsDiscarded); |
| SARLUS(maxNumReTransmitDatagram); |
| SARLUS(maxNumReTransmitFrames); |
| SARLUS(maxNumConsecutiveDuplicateFrames); |
| /* misaligned here so we have to go to characters */ |
| SARLUIA(numBytesTransmitted); |
| SARLUIA(numBytesReceived); |
| SARLUIA(numCRCErrors); |
| SARLUIA(numLengthErrors); |
| SARLUIA(numAbortErrors); |
| SARLUIA(numTXUnderruns); |
| SARLUIA(numRXOverruns); |
| SARLUIA(numHoldOffs); |
| SARLUIA(numFramesTransmitted); |
| SARLUIA(numFramesReceived); |
| SARLUIA(numReceiveFramesLost); |
| SARLUIA(numRXBufferOverflows); |
| SARLUIA(numFramesDiscardedAddrMismatch); |
| SARLUIA(numFramesDiscardedSIDMismatch); |
| SARLUIA(numPollsTransmistted); |
| SARLUIA(numPollAcknowledges); |
| SARLUIA(numStatusTimeouts); |
| SARLUIA(numNACKReceived); |
| SARLUS(auxCmd); |
| SARLUCN(dumpPtr, 4); |
| SARLUC(dumpVal); |
| SARLUC(wireTest); |
| |
| /* next 4 seems too long for procfs, over single page ? |
| SARLUCN( _17, 0x86); |
| SARLUCN( txBuffer, 0x800); |
| SARLUCN( rxBuffer, 0x800); |
| SARLUCN( _18, 0x0bff); |
| */ |
| |
| pos += sprintf(arlan_drive_info + pos, "rxRing\t=\t0x"); |
| for (i = 0; i < 0x50; i++) |
| pos += sprintf(arlan_drive_info + pos, "%02x", ((char *) priva->conf)[priva->conf->rxOffset + i]); |
| pos += sprintf(arlan_drive_info + pos, "\n"); |
| |
| SARLUC(configStatus); |
| SARLUC(_22); |
| SARLUC(progIOCtrl); |
| SARLUC(shareMBase); |
| SARLUC(controlRegister); |
| |
| pos += sprintf(arlan_drive_info + pos, " total %d chars\n", pos); |
| if (ctl) |
| if (ctl->procname) |
| pos += sprintf(arlan_drive_info + pos, " driver name : %s\n", ctl->procname); |
| final: |
| *lenp = pos; |
| |
| if (!write) |
| retv = proc_dostring(ctl, write, filp, buffer, lenp, ppos); |
| else |
| { |
| *lenp = 0; |
| return -1; |
| } |
| return retv; |
| } |
| |
| |
| static int arlan_sysctl_info161719(ctl_table * ctl, int write, struct file *filp, |
| void __user *buffer, size_t * lenp, loff_t *ppos) |
| { |
| int i; |
| int retv, pos, devnum; |
| struct arlan_private *priva = NULL; |
| |
| pos = 0; |
| devnum = ctl->procname[5] - '0'; |
| if (arlan_device[devnum] == NULL) |
| { |
| pos += sprintf(arlan_drive_info + pos, "No device found here \n"); |
| goto final; |
| } |
| else |
| priva = arlan_device[devnum]->priv; |
| if (priva == NULL) |
| { |
| printk(KERN_WARNING " Could not find the device private in arlan procsys, bad\n "); |
| return -1; |
| } |
| memcpy_fromio(priva->conf, priva->card, sizeof(struct arlan_shmem)); |
| SARLUCN(_16, 0xC0); |
| SARLUCN(_17, 0x6A); |
| SARLUCN(_18, 14); |
| SARLUCN(_19, 0x86); |
| SARLUCN(_21, 0x3fd); |
| |
| final: |
| *lenp = pos; |
| retv = proc_dostring(ctl, write, filp, buffer, lenp, ppos); |
| return retv; |
| } |
| |
| static int arlan_sysctl_infotxRing(ctl_table * ctl, int write, struct file *filp, |
| void __user *buffer, size_t * lenp, loff_t *ppos) |
| { |
| int i; |
| int retv, pos, devnum; |
| struct arlan_private *priva = NULL; |
| |
| pos = 0; |
| devnum = ctl->procname[5] - '0'; |
| if (arlan_device[devnum] == NULL) |
| { |
| pos += sprintf(arlan_drive_info + pos, "No device found here \n"); |
| goto final; |
| } |
| else |
| priva = arlan_device[devnum]->priv; |
| if (priva == NULL) |
| { |
| printk(KERN_WARNING " Could not find the device private in arlan procsys, bad\n "); |
| return -1; |
| } |
| memcpy_fromio(priva->conf, priva->card, sizeof(struct arlan_shmem)); |
| SARLBNpln(u_char, txBuffer, 0x800); |
| final: |
| *lenp = pos; |
| retv = proc_dostring(ctl, write, filp, buffer, lenp, ppos); |
| return retv; |
| } |
| |
| static int arlan_sysctl_inforxRing(ctl_table * ctl, int write, struct file *filp, |
| void __user *buffer, size_t * lenp, loff_t *ppos) |
| { |
| int i; |
| int retv, pos, devnum; |
| struct arlan_private *priva = NULL; |
| |
| pos = 0; |
| devnum = ctl->procname[5] - '0'; |
| if (arlan_device[devnum] == NULL) |
| { |
| pos += sprintf(arlan_drive_info + pos, "No device found here \n"); |
| goto final; |
| } else |
| priva = arlan_device[devnum]->priv; |
| if (priva == NULL) |
| { |
| printk(KERN_WARNING " Could not find the device private in arlan procsys, bad\n "); |
| return -1; |
| } |
| memcpy_fromio(priva->conf, priva->card, sizeof(struct arlan_shmem)); |
| SARLBNpln(u_char, rxBuffer, 0x800); |
| final: |
| *lenp = pos; |
| retv = proc_dostring(ctl, write, filp, buffer, lenp, ppos); |
| return retv; |
| } |
| |
| static int arlan_sysctl_info18(ctl_table * ctl, int write, struct file *filp, |
| void __user *buffer, size_t * lenp, loff_t *ppos) |
| { |
| int i; |
| int retv, pos, devnum; |
| struct arlan_private *priva = NULL; |
| |
| pos = 0; |
| devnum = ctl->procname[5] - '0'; |
| if (arlan_device[devnum] == NULL) |
| { |
| pos += sprintf(arlan_drive_info + pos, "No device found here \n"); |
| goto final; |
| } |
| else |
| priva = arlan_device[devnum]->priv; |
| if (priva == NULL) |
| { |
| printk(KERN_WARNING " Could not find the device private in arlan procsys, bad\n "); |
| return -1; |
| } |
| memcpy_fromio(priva->conf, priva->card, sizeof(struct arlan_shmem)); |
| SARLBNpln(u_char, _18, 0x800); |
| |
| final: |
| *lenp = pos; |
| retv = proc_dostring(ctl, write, filp, buffer, lenp, ppos); |
| return retv; |
| } |
| |
| |
| #endif /* #ifdef ARLAN_PROC_SHM_DUMP */ |
| |
| |
| static char conf_reset_result[200]; |
| |
| static int arlan_configure(ctl_table * ctl, int write, struct file *filp, |
| void __user *buffer, size_t * lenp, loff_t *ppos) |
| { |
| int pos = 0; |
| int devnum = ctl->procname[6] - '0'; |
| struct arlan_private *priv; |
| |
| if (devnum < 0 || devnum > MAX_ARLANS - 1) |
| { |
| printk(KERN_WARNING "too strange devnum in procfs parse\n "); |
| return -1; |
| } |
| else if (arlan_device[devnum] != NULL) |
| { |
| priv = arlan_device[devnum]->priv; |
| |
| arlan_command(arlan_device[devnum], ARLAN_COMMAND_CLEAN_AND_CONF); |
| } |
| else |
| return -1; |
| |
| *lenp = pos; |
| return proc_dostring(ctl, write, filp, buffer, lenp, ppos); |
| } |
| |
| static int arlan_sysctl_reset(ctl_table * ctl, int write, struct file *filp, |
| void __user *buffer, size_t * lenp, loff_t *ppos) |
| { |
| int pos = 0; |
| int devnum = ctl->procname[5] - '0'; |
| struct arlan_private *priv; |
| |
| if (devnum < 0 || devnum > MAX_ARLANS - 1) |
| { |
| printk(KERN_WARNING "too strange devnum in procfs parse\n "); |
| return -1; |
| } |
| else if (arlan_device[devnum] != NULL) |
| { |
| priv = arlan_device[devnum]->priv; |
| arlan_command(arlan_device[devnum], ARLAN_COMMAND_CLEAN_AND_RESET); |
| |
| } else |
| return -1; |
| *lenp = pos + 3; |
| return proc_dostring(ctl, write, filp, buffer, lenp, ppos); |
| } |
| |
| |
| /* Place files in /proc/sys/dev/arlan */ |
| #define CTBLN(num,card,nam) \ |
| { .ctl_name = num,\ |
| .procname = #nam,\ |
| .data = &(arlan_conf[card].nam),\ |
| .maxlen = sizeof(int), .mode = 0600, .proc_handler = &proc_dointvec} |
| #ifdef ARLAN_DEBUGGING |
| |
| #define ARLAN_PROC_DEBUG_ENTRIES \ |
| { .ctl_name = 48, .procname = "entry_exit_debug",\ |
| .data = &arlan_entry_and_exit_debug,\ |
| .maxlen = sizeof(int), .mode = 0600, .proc_handler = &proc_dointvec},\ |
| { .ctl_name = 49, .procname = "debug", .data = &arlan_debug,\ |
| .maxlen = sizeof(int), .mode = 0600, .proc_handler = &proc_dointvec}, |
| #else |
| #define ARLAN_PROC_DEBUG_ENTRIES |
| #endif |
| |
| #define ARLAN_SYSCTL_TABLE_TOTAL(cardNo)\ |
| CTBLN(1,cardNo,spreadingCode),\ |
| CTBLN(2,cardNo, channelNumber),\ |
| CTBLN(3,cardNo, scramblingDisable),\ |
| CTBLN(4,cardNo, txAttenuation),\ |
| CTBLN(5,cardNo, systemId), \ |
| CTBLN(6,cardNo, maxDatagramSize),\ |
| CTBLN(7,cardNo, maxFrameSize),\ |
| CTBLN(8,cardNo, maxRetries),\ |
| CTBLN(9,cardNo, receiveMode),\ |
| CTBLN(10,cardNo, priority),\ |
| CTBLN(11,cardNo, rootOrRepeater),\ |
| CTBLN(12,cardNo, SID),\ |
| CTBLN(13,cardNo, registrationMode),\ |
| CTBLN(14,cardNo, registrationFill),\ |
| CTBLN(15,cardNo, localTalkAddress),\ |
| CTBLN(16,cardNo, codeFormat),\ |
| CTBLN(17,cardNo, numChannels),\ |
| CTBLN(18,cardNo, channel1),\ |
| CTBLN(19,cardNo, channel2),\ |
| CTBLN(20,cardNo, channel3),\ |
| CTBLN(21,cardNo, channel4),\ |
| CTBLN(22,cardNo, txClear),\ |
| CTBLN(23,cardNo, txRetries),\ |
| CTBLN(24,cardNo, txRouting),\ |
| CTBLN(25,cardNo, txScrambled),\ |
| CTBLN(26,cardNo, rxParameter),\ |
| CTBLN(27,cardNo, txTimeoutMs),\ |
| CTBLN(28,cardNo, waitCardTimeout),\ |
| CTBLN(29,cardNo, channelSet), \ |
| {.ctl_name = 30, .procname = "name",\ |
| .data = arlan_conf[cardNo].siteName,\ |
| .maxlen = 16, .mode = 0600, .proc_handler = &proc_dostring},\ |
| CTBLN(31,cardNo,waitTime),\ |
| CTBLN(32,cardNo,lParameter),\ |
| CTBLN(33,cardNo,_15),\ |
| CTBLN(34,cardNo,headerSize),\ |
| CTBLN(36,cardNo,tx_delay_ms),\ |
| CTBLN(37,cardNo,retries),\ |
| CTBLN(38,cardNo,ReTransmitPacketMaxSize),\ |
| CTBLN(39,cardNo,waitReTransmitPacketMaxSize),\ |
| CTBLN(40,cardNo,fastReTransCount),\ |
| CTBLN(41,cardNo,driverRetransmissions),\ |
| CTBLN(42,cardNo,txAckTimeoutMs),\ |
| CTBLN(43,cardNo,registrationInterrupts),\ |
| CTBLN(44,cardNo,hardwareType),\ |
| CTBLN(45,cardNo,radioType),\ |
| CTBLN(46,cardNo,writeEEPROM),\ |
| CTBLN(47,cardNo,writeRadioType),\ |
| ARLAN_PROC_DEBUG_ENTRIES\ |
| CTBLN(50,cardNo,in_speed),\ |
| CTBLN(51,cardNo,out_speed),\ |
| CTBLN(52,cardNo,in_speed10),\ |
| CTBLN(53,cardNo,out_speed10),\ |
| CTBLN(54,cardNo,in_speed_max),\ |
| CTBLN(55,cardNo,out_speed_max),\ |
| CTBLN(56,cardNo,measure_rate),\ |
| CTBLN(57,cardNo,pre_Command_Wait),\ |
| CTBLN(58,cardNo,rx_tweak1),\ |
| CTBLN(59,cardNo,rx_tweak2),\ |
| CTBLN(60,cardNo,tx_queue_len),\ |
| |
| |
| |
| static ctl_table arlan_conf_table0[] = |
| { |
| ARLAN_SYSCTL_TABLE_TOTAL(0) |
| |
| #ifdef ARLAN_PROC_SHM_DUMP |
| { |
| .ctl_name = 150, |
| .procname = "arlan0-txRing", |
| .data = &arlan_drive_info, |
| .maxlen = ARLAN_STR_SIZE, |
| .mode = 0400, |
| .proc_handler = &arlan_sysctl_infotxRing, |
| }, |
| { |
| .ctl_name = 151, |
| .procname = "arlan0-rxRing", |
| .data = &arlan_drive_info, |
| .maxlen = ARLAN_STR_SIZE, |
| .mode = 0400, |
| .proc_handler = &arlan_sysctl_inforxRing, |
| }, |
| { |
| .ctl_name = 152, |
| .procname = "arlan0-18", |
| .data = &arlan_drive_info, |
| .maxlen = ARLAN_STR_SIZE, |
| .mode = 0400, |
| .proc_handler = &arlan_sysctl_info18, |
| }, |
| { |
| .ctl_name = 153, |
| .procname = "arlan0-ring", |
| .data = &arlan_drive_info, |
| .maxlen = ARLAN_STR_SIZE, |
| .mode = 0400, |
| .proc_handler = &arlan_sysctl_info161719, |
| }, |
| { |
| .ctl_name = 154, |
| .procname = "arlan0-shm-cpy", |
| .data = &arlan_drive_info, |
| .maxlen = ARLAN_STR_SIZE, |
| .mode = 0400, |
| .proc_handler = &arlan_sysctl_info, |
| }, |
| #endif |
| { |
| .ctl_name = 155, |
| .procname = "config0", |
| .data = &conf_reset_result, |
| .maxlen = 100, |
| .mode = 0400, |
| .proc_handler = &arlan_configure |
| }, |
| { |
| .ctl_name = 156, |
| .procname = "reset0", |
| .data = &conf_reset_result, |
| .maxlen = 100, |
| .mode = 0400, |
| .proc_handler = &arlan_sysctl_reset, |
| }, |
| { .ctl_name = 0 } |
| }; |
| |
| static ctl_table arlan_conf_table1[] = |
| { |
| |
| ARLAN_SYSCTL_TABLE_TOTAL(1) |
| |
| #ifdef ARLAN_PROC_SHM_DUMP |
| { |
| .ctl_name = 150, |
| .procname = "arlan1-txRing", |
| .data = &arlan_drive_info, |
| .maxlen = ARLAN_STR_SIZE, |
| .mode = 0400, |
| .proc_handler = &arlan_sysctl_infotxRing, |
| }, |
| { |
| .ctl_name = 151, |
| .procname = "arlan1-rxRing", |
| .data = &arlan_drive_info, |
| .maxlen = ARLAN_STR_SIZE, |
| .mode = 0400, |
| .proc_handler = &arlan_sysctl_inforxRing, |
| }, |
| { |
| .ctl_name = 152, |
| .procname = "arlan1-18", |
| .data = &arlan_drive_info, |
| .maxlen = ARLAN_STR_SIZE, |
| .mode = 0400, |
| .proc_handler = &arlan_sysctl_info18, |
| }, |
| { |
| .ctl_name = 153, |
| .procname = "arlan1-ring", |
| .data = &arlan_drive_info, |
| .maxlen = ARLAN_STR_SIZE, |
| .mode = 0400, |
| .proc_handler = &arlan_sysctl_info161719, |
| }, |
| { |
| .ctl_name = 154, |
| .procname = "arlan1-shm-cpy", |
| .data = &arlan_drive_info, |
| .maxlen = ARLAN_STR_SIZE, |
| .mode = 0400, |
| .proc_handler = &arlan_sysctl_info, |
| }, |
| #endif |
| { |
| .ctl_name = 155, |
| .procname = "config1", |
| .data = &conf_reset_result, |
| .maxlen = 100, |
| .mode = 0400, |
| .proc_handler = &arlan_configure, |
| }, |
| { |
| .ctl_name = 156, |
| .procname = "reset1", |
| .data = &conf_reset_result, |
| .maxlen = 100, |
| .mode = 0400, |
| .proc_handler = &arlan_sysctl_reset, |
| }, |
| { .ctl_name = 0 } |
| }; |
| |
| static ctl_table arlan_conf_table2[] = |
| { |
| |
| ARLAN_SYSCTL_TABLE_TOTAL(2) |
| |
| #ifdef ARLAN_PROC_SHM_DUMP |
| { |
| .ctl_name = 150, |
| .procname = "arlan2-txRing", |
| .data = &arlan_drive_info, |
| .maxlen = ARLAN_STR_SIZE, |
| .mode = 0400, |
| .proc_handler = &arlan_sysctl_infotxRing, |
| }, |
| { |
| .ctl_name = 151, |
| .procname = "arlan2-rxRing", |
| .data = &arlan_drive_info, |
| .maxlen = ARLAN_STR_SIZE, |
| .mode = 0400, |
| .proc_handler = &arlan_sysctl_inforxRing, |
| }, |
| { |
| .ctl_name = 152, |
| .procname = "arlan2-18", |
| .data = &arlan_drive_info, |
| .maxlen = ARLAN_STR_SIZE, |
| .mode = 0400, |
| .proc_handler = &arlan_sysctl_info18, |
| }, |
| { |
| .ctl_name = 153, |
| .procname = "arlan2-ring", |
| .data = &arlan_drive_info, |
| .maxlen = ARLAN_STR_SIZE, |
| .mode = 0400, |
| .proc_handler = &arlan_sysctl_info161719, |
| }, |
| { |
| .ctl_name = 154, |
| .procname = "arlan2-shm-cpy", |
| .data = &arlan_drive_info, |
| .maxlen = ARLAN_STR_SIZE, |
| .mode = 0400, |
| .proc_handler = &arlan_sysctl_info, |
| }, |
| #endif |
| { |
| .ctl_name = 155, |
| .procname = "config2", |
| .data = &conf_reset_result, |
| .maxlen = 100, |
| .mode = 0400, |
| .proc_handler = &arlan_configure, |
| }, |
| { |
| .ctl_name = 156, |
| .procname = "reset2", |
| .data = &conf_reset_result, |
| .maxlen = 100, |
| .mode = 0400, |
| .proc_handler = &arlan_sysctl_reset, |
| }, |
| { .ctl_name = 0 } |
| }; |
| |
| static ctl_table arlan_conf_table3[] = |
| { |
| |
| ARLAN_SYSCTL_TABLE_TOTAL(3) |
| |
| #ifdef ARLAN_PROC_SHM_DUMP |
| { |
| .ctl_name = 150, |
| .procname = "arlan3-txRing", |
| .data = &arlan_drive_info, |
| .maxlen = ARLAN_STR_SIZE, |
| .mode = 0400, |
| .proc_handler = &arlan_sysctl_infotxRing, |
| }, |
| { |
| .ctl_name = 151, |
| .procname = "arlan3-rxRing", |
| .data = &arlan_drive_info, |
| .maxlen = ARLAN_STR_SIZE, |
| .mode = 0400, |
| .proc_handler = &arlan_sysctl_inforxRing, |
| }, |
| { |
| .ctl_name = 152, |
| .procname = "arlan3-18", |
| .data = &arlan_drive_info, |
| .maxlen = ARLAN_STR_SIZE, |
| .mode = 0400, |
| .proc_handler = &arlan_sysctl_info18, |
| }, |
| { |
| .ctl_name = 153, |
| .procname = "arlan3-ring", |
| .data = &arlan_drive_info, |
| .maxlen = ARLAN_STR_SIZE, |
| .mode = 0400, |
| .proc_handler = &arlan_sysctl_info161719, |
| }, |
| { |
| .ctl_name = 154, |
| .procname = "arlan3-shm-cpy", |
| .data = &arlan_drive_info, |
| .maxlen = ARLAN_STR_SIZE, |
| .mode = 0400, |
| .proc_handler = &arlan_sysctl_info, |
| }, |
| #endif |
| { |
| .ctl_name = 155, |
| .procname = "config3", |
| .data = &conf_reset_result, |
| .maxlen = 100, |
| .mode = 0400, |
| .proc_handler = &arlan_configure, |
| }, |
| { |
| .ctl_name = 156, |
| .procname = "reset3", |
| .data = &conf_reset_result, |
| .maxlen = 100, |
| .mode = 0400, |
| .proc_handler = &arlan_sysctl_reset, |
| }, |
| { .ctl_name = 0 } |
| }; |
| |
| |
| |
| static ctl_table arlan_table[] = |
| { |
| { |
| .ctl_name = 0, |
| .procname = "arlan0", |
| .maxlen = 0, |
| .mode = 0600, |
| .child = arlan_conf_table0, |
| }, |
| { |
| .ctl_name = 0, |
| .procname = "arlan1", |
| .maxlen = 0, |
| .mode = 0600, |
| .child = arlan_conf_table1, |
| }, |
| { |
| .ctl_name = 0, |
| .procname = "arlan2", |
| .maxlen = 0, |
| .mode = 0600, |
| .child = arlan_conf_table2, |
| }, |
| { |
| .ctl_name = 0, |
| .procname = "arlan3", |
| .maxlen = 0, |
| .mode = 0600, |
| .child = arlan_conf_table3, |
| }, |
| { .ctl_name = 0 } |
| }; |
| |
| #else |
| |
| static ctl_table arlan_table[MAX_ARLANS + 1] = |
| { |
| { .ctl_name = 0 } |
| }; |
| #endif |
| #else |
| |
| static ctl_table arlan_table[MAX_ARLANS + 1] = |
| { |
| { .ctl_name = 0 } |
| }; |
| #endif |
| |
| |
| // static int mmtu = 1234; |
| |
| static ctl_table arlan_root_table[] = |
| { |
| { |
| .ctl_name = 254, |
| .procname = "arlan", |
| .maxlen = 0, |
| .mode = 0555, |
| .child = arlan_table, |
| }, |
| { .ctl_name = 0 } |
| }; |
| |
| /* Make sure that /proc/sys/dev is there */ |
| //static ctl_table arlan_device_root_table[] = |
| //{ |
| // {CTL_DEV, "dev", NULL, 0, 0555, arlan_root_table}, |
| // {0} |
| //}; |
| |
| |
| #ifdef CONFIG_PROC_FS |
| static struct ctl_table_header *arlan_device_sysctl_header; |
| |
| int __init init_arlan_proc(void) |
| { |
| |
| int i = 0; |
| if (arlan_device_sysctl_header) |
| return 0; |
| for (i = 0; i < MAX_ARLANS && arlan_device[i]; i++) |
| arlan_table[i].ctl_name = i + 1; |
| arlan_device_sysctl_header = register_sysctl_table(arlan_root_table, 0); |
| if (!arlan_device_sysctl_header) |
| return -1; |
| |
| return 0; |
| |
| } |
| |
| void __exit cleanup_arlan_proc(void) |
| { |
| unregister_sysctl_table(arlan_device_sysctl_header); |
| arlan_device_sysctl_header = NULL; |
| |
| } |
| #endif |
