blob: 26fa1a4d1e6bf12665fba5cdf405ab7dac461372 [file] [log] [blame]
/*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.GPL.
*
* BSD LICENSE
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <linux/completion.h>
#include <linux/irqflags.h>
#include "sas.h"
#include <scsi/libsas.h>
#include "remote_device.h"
#include "remote_node_context.h"
#include "isci.h"
#include "request.h"
#include "task.h"
#include "host.h"
/**
* isci_task_refuse() - complete the request to the upper layer driver in
* the case where an I/O needs to be completed back in the submit path.
* @ihost: host on which the the request was queued
* @task: request to complete
* @response: response code for the completed task.
* @status: status code for the completed task.
*
*/
static void isci_task_refuse(struct isci_host *ihost, struct sas_task *task,
enum service_response response,
enum exec_status status)
{
unsigned long flags;
/* Normal notification (task_done) */
dev_dbg(&ihost->pdev->dev, "%s: task = %p, response=%d, status=%d\n",
__func__, task, response, status);
spin_lock_irqsave(&task->task_state_lock, flags);
task->task_status.resp = response;
task->task_status.stat = status;
/* Normal notification (task_done) */
task->task_state_flags |= SAS_TASK_STATE_DONE;
task->task_state_flags &= ~(SAS_TASK_AT_INITIATOR |
SAS_TASK_STATE_PENDING);
task->lldd_task = NULL;
spin_unlock_irqrestore(&task->task_state_lock, flags);
task->task_done(task);
}
#define for_each_sas_task(num, task) \
for (; num > 0; num--,\
task = list_entry(task->list.next, struct sas_task, list))
static inline int isci_device_io_ready(struct isci_remote_device *idev,
struct sas_task *task)
{
return idev ? test_bit(IDEV_IO_READY, &idev->flags) ||
(test_bit(IDEV_IO_NCQERROR, &idev->flags) &&
isci_task_is_ncq_recovery(task))
: 0;
}
/**
* isci_task_execute_task() - This function is one of the SAS Domain Template
* functions. This function is called by libsas to send a task down to
* hardware.
* @task: This parameter specifies the SAS task to send.
* @gfp_flags: This parameter specifies the context of this call.
*
* status, zero indicates success.
*/
int isci_task_execute_task(struct sas_task *task, gfp_t gfp_flags)
{
struct isci_host *ihost = dev_to_ihost(task->dev);
struct isci_remote_device *idev;
unsigned long flags;
enum sci_status status = SCI_FAILURE;
bool io_ready;
u16 tag;
spin_lock_irqsave(&ihost->scic_lock, flags);
idev = isci_lookup_device(task->dev);
io_ready = isci_device_io_ready(idev, task);
tag = isci_alloc_tag(ihost);
spin_unlock_irqrestore(&ihost->scic_lock, flags);
dev_dbg(&ihost->pdev->dev,
"task: %p, dev: %p idev: %p:%#lx cmd = %p\n",
task, task->dev, idev, idev ? idev->flags : 0,
task->uldd_task);
if (!idev) {
isci_task_refuse(ihost, task, SAS_TASK_UNDELIVERED,
SAS_DEVICE_UNKNOWN);
} else if (!io_ready || tag == SCI_CONTROLLER_INVALID_IO_TAG) {
/* Indicate QUEUE_FULL so that the scsi midlayer
* retries.
*/
isci_task_refuse(ihost, task, SAS_TASK_COMPLETE,
SAS_QUEUE_FULL);
} else {
/* There is a device and it's ready for I/O. */
spin_lock_irqsave(&task->task_state_lock, flags);
if (task->task_state_flags & SAS_TASK_STATE_ABORTED) {
/* The I/O was aborted. */
spin_unlock_irqrestore(&task->task_state_lock, flags);
isci_task_refuse(ihost, task,
SAS_TASK_UNDELIVERED,
SAM_STAT_TASK_ABORTED);
} else {
task->task_state_flags |= SAS_TASK_AT_INITIATOR;
spin_unlock_irqrestore(&task->task_state_lock, flags);
/* build and send the request. */
status = isci_request_execute(ihost, idev, task, tag);
if (status != SCI_SUCCESS) {
spin_lock_irqsave(&task->task_state_lock, flags);
/* Did not really start this command. */
task->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
spin_unlock_irqrestore(&task->task_state_lock, flags);
if (test_bit(IDEV_GONE, &idev->flags)) {
/* Indicate that the device
* is gone.
*/
isci_task_refuse(ihost, task,
SAS_TASK_UNDELIVERED,
SAS_DEVICE_UNKNOWN);
} else {
/* Indicate QUEUE_FULL so that
* the scsi midlayer retries.
* If the request failed for
* remote device reasons, it
* gets returned as
* SAS_TASK_UNDELIVERED next
* time through.
*/
isci_task_refuse(ihost, task,
SAS_TASK_COMPLETE,
SAS_QUEUE_FULL);
}
}
}
}
if (status != SCI_SUCCESS && tag != SCI_CONTROLLER_INVALID_IO_TAG) {
spin_lock_irqsave(&ihost->scic_lock, flags);
/* command never hit the device, so just free
* the tci and skip the sequence increment
*/
isci_tci_free(ihost, ISCI_TAG_TCI(tag));
spin_unlock_irqrestore(&ihost->scic_lock, flags);
}
isci_put_device(idev);
return 0;
}
static struct isci_request *isci_task_request_build(struct isci_host *ihost,
struct isci_remote_device *idev,
u16 tag, struct isci_tmf *isci_tmf)
{
enum sci_status status = SCI_FAILURE;
struct isci_request *ireq = NULL;
struct domain_device *dev;
dev_dbg(&ihost->pdev->dev,
"%s: isci_tmf = %p\n", __func__, isci_tmf);
dev = idev->domain_dev;
/* do common allocation and init of request object. */
ireq = isci_tmf_request_from_tag(ihost, isci_tmf, tag);
if (!ireq)
return NULL;
/* let the core do it's construct. */
status = sci_task_request_construct(ihost, idev, tag,
ireq);
if (status != SCI_SUCCESS) {
dev_warn(&ihost->pdev->dev,
"%s: sci_task_request_construct failed - "
"status = 0x%x\n",
__func__,
status);
return NULL;
}
/* XXX convert to get this from task->tproto like other drivers */
if (dev->dev_type == SAS_END_DEVICE) {
isci_tmf->proto = SAS_PROTOCOL_SSP;
status = sci_task_request_construct_ssp(ireq);
if (status != SCI_SUCCESS)
return NULL;
}
return ireq;
}
static int isci_task_execute_tmf(struct isci_host *ihost,
struct isci_remote_device *idev,
struct isci_tmf *tmf, unsigned long timeout_ms)
{
DECLARE_COMPLETION_ONSTACK(completion);
enum sci_status status = SCI_FAILURE;
struct isci_request *ireq;
int ret = TMF_RESP_FUNC_FAILED;
unsigned long flags;
unsigned long timeleft;
u16 tag;
spin_lock_irqsave(&ihost->scic_lock, flags);
tag = isci_alloc_tag(ihost);
spin_unlock_irqrestore(&ihost->scic_lock, flags);
if (tag == SCI_CONTROLLER_INVALID_IO_TAG)
return ret;
/* sanity check, return TMF_RESP_FUNC_FAILED
* if the device is not there and ready.
*/
if (!idev ||
(!test_bit(IDEV_IO_READY, &idev->flags) &&
!test_bit(IDEV_IO_NCQERROR, &idev->flags))) {
dev_dbg(&ihost->pdev->dev,
"%s: idev = %p not ready (%#lx)\n",
__func__,
idev, idev ? idev->flags : 0);
goto err_tci;
} else
dev_dbg(&ihost->pdev->dev,
"%s: idev = %p\n",
__func__, idev);
/* Assign the pointer to the TMF's completion kernel wait structure. */
tmf->complete = &completion;
tmf->status = SCI_FAILURE_TIMEOUT;
ireq = isci_task_request_build(ihost, idev, tag, tmf);
if (!ireq)
goto err_tci;
spin_lock_irqsave(&ihost->scic_lock, flags);
/* start the TMF io. */
status = sci_controller_start_task(ihost, idev, ireq);
if (status != SCI_SUCCESS) {
dev_dbg(&ihost->pdev->dev,
"%s: start_io failed - status = 0x%x, request = %p\n",
__func__,
status,
ireq);
spin_unlock_irqrestore(&ihost->scic_lock, flags);
goto err_tci;
}
spin_unlock_irqrestore(&ihost->scic_lock, flags);
/* The RNC must be unsuspended before the TMF can get a response. */
isci_remote_device_resume_from_abort(ihost, idev);
/* Wait for the TMF to complete, or a timeout. */
timeleft = wait_for_completion_timeout(&completion,
msecs_to_jiffies(timeout_ms));
if (timeleft == 0) {
/* The TMF did not complete - this could be because
* of an unplug. Terminate the TMF request now.
*/
isci_remote_device_suspend_terminate(ihost, idev, ireq);
}
isci_print_tmf(ihost, tmf);
if (tmf->status == SCI_SUCCESS)
ret = TMF_RESP_FUNC_COMPLETE;
else if (tmf->status == SCI_FAILURE_IO_RESPONSE_VALID) {
dev_dbg(&ihost->pdev->dev,
"%s: tmf.status == "
"SCI_FAILURE_IO_RESPONSE_VALID\n",
__func__);
ret = TMF_RESP_FUNC_COMPLETE;
}
/* Else - leave the default "failed" status alone. */
dev_dbg(&ihost->pdev->dev,
"%s: completed request = %p\n",
__func__,
ireq);
return ret;
err_tci:
spin_lock_irqsave(&ihost->scic_lock, flags);
isci_tci_free(ihost, ISCI_TAG_TCI(tag));
spin_unlock_irqrestore(&ihost->scic_lock, flags);
return ret;
}
static void isci_task_build_tmf(struct isci_tmf *tmf,
enum isci_tmf_function_codes code)
{
memset(tmf, 0, sizeof(*tmf));
tmf->tmf_code = code;
}
static void isci_task_build_abort_task_tmf(struct isci_tmf *tmf,
enum isci_tmf_function_codes code,
struct isci_request *old_request)
{
isci_task_build_tmf(tmf, code);
tmf->io_tag = old_request->io_tag;
}
/**
* isci_task_send_lu_reset_sas() - This function is called by of the SAS Domain
* Template functions.
* @lun: This parameter specifies the lun to be reset.
*
* status, zero indicates success.
*/
static int isci_task_send_lu_reset_sas(
struct isci_host *isci_host,
struct isci_remote_device *isci_device,
u8 *lun)
{
struct isci_tmf tmf;
int ret = TMF_RESP_FUNC_FAILED;
dev_dbg(&isci_host->pdev->dev,
"%s: isci_host = %p, isci_device = %p\n",
__func__, isci_host, isci_device);
/* Send the LUN reset to the target. By the time the call returns,
* the TMF has fully exected in the target (in which case the return
* value is "TMF_RESP_FUNC_COMPLETE", or the request timed-out (or
* was otherwise unable to be executed ("TMF_RESP_FUNC_FAILED").
*/
isci_task_build_tmf(&tmf, isci_tmf_ssp_lun_reset);
#define ISCI_LU_RESET_TIMEOUT_MS 2000 /* 2 second timeout. */
ret = isci_task_execute_tmf(isci_host, isci_device, &tmf, ISCI_LU_RESET_TIMEOUT_MS);
if (ret == TMF_RESP_FUNC_COMPLETE)
dev_dbg(&isci_host->pdev->dev,
"%s: %p: TMF_LU_RESET passed\n",
__func__, isci_device);
else
dev_dbg(&isci_host->pdev->dev,
"%s: %p: TMF_LU_RESET failed (%x)\n",
__func__, isci_device, ret);
return ret;
}
int isci_task_lu_reset(struct domain_device *dev, u8 *lun)
{
struct isci_host *ihost = dev_to_ihost(dev);
struct isci_remote_device *idev;
unsigned long flags;
int ret = TMF_RESP_FUNC_COMPLETE;
spin_lock_irqsave(&ihost->scic_lock, flags);
idev = isci_get_device(dev->lldd_dev);
spin_unlock_irqrestore(&ihost->scic_lock, flags);
dev_dbg(&ihost->pdev->dev,
"%s: domain_device=%p, isci_host=%p; isci_device=%p\n",
__func__, dev, ihost, idev);
if (!idev) {
/* If the device is gone, escalate to I_T_Nexus_Reset. */
dev_dbg(&ihost->pdev->dev, "%s: No dev\n", __func__);
ret = TMF_RESP_FUNC_FAILED;
goto out;
}
/* Suspend the RNC, kill all TCs */
if (isci_remote_device_suspend_terminate(ihost, idev, NULL)
!= SCI_SUCCESS) {
/* The suspend/terminate only fails if isci_get_device fails */
ret = TMF_RESP_FUNC_FAILED;
goto out;
}
/* All pending I/Os have been terminated and cleaned up. */
if (!test_bit(IDEV_GONE, &idev->flags)) {
if (dev_is_sata(dev))
sas_ata_schedule_reset(dev);
else
/* Send the task management part of the reset. */
ret = isci_task_send_lu_reset_sas(ihost, idev, lun);
}
out:
isci_put_device(idev);
return ret;
}
/* int (*lldd_clear_nexus_port)(struct asd_sas_port *); */
int isci_task_clear_nexus_port(struct asd_sas_port *port)
{
return TMF_RESP_FUNC_FAILED;
}
int isci_task_clear_nexus_ha(struct sas_ha_struct *ha)
{
return TMF_RESP_FUNC_FAILED;
}
/* Task Management Functions. Must be called from process context. */
/**
* isci_task_abort_task() - This function is one of the SAS Domain Template
* functions. This function is called by libsas to abort a specified task.
* @task: This parameter specifies the SAS task to abort.
*
* status, zero indicates success.
*/
int isci_task_abort_task(struct sas_task *task)
{
struct isci_host *ihost = dev_to_ihost(task->dev);
DECLARE_COMPLETION_ONSTACK(aborted_io_completion);
struct isci_request *old_request = NULL;
struct isci_remote_device *idev = NULL;
struct isci_tmf tmf;
int ret = TMF_RESP_FUNC_FAILED;
unsigned long flags;
int target_done_already = 0;
/* Get the isci_request reference from the task. Note that
* this check does not depend on the pending request list
* in the device, because tasks driving resets may land here
* after completion in the core.
*/
spin_lock_irqsave(&ihost->scic_lock, flags);
spin_lock(&task->task_state_lock);
old_request = task->lldd_task;
/* If task is already done, the request isn't valid */
if (!(task->task_state_flags & SAS_TASK_STATE_DONE) &&
(task->task_state_flags & SAS_TASK_AT_INITIATOR) &&
old_request) {
idev = isci_get_device(task->dev->lldd_dev);
target_done_already = test_bit(IREQ_COMPLETE_IN_TARGET,
&old_request->flags);
}
spin_unlock(&task->task_state_lock);
spin_unlock_irqrestore(&ihost->scic_lock, flags);
dev_warn(&ihost->pdev->dev,
"%s: dev = %p (%s%s), task = %p, old_request == %p\n",
__func__, idev,
(dev_is_sata(task->dev) ? "STP/SATA"
: ((dev_is_expander(task->dev->dev_type))
? "SMP"
: "SSP")),
((idev) ? ((test_bit(IDEV_GONE, &idev->flags))
? " IDEV_GONE"
: "")
: " <NULL>"),
task, old_request);
/* Device reset conditions signalled in task_state_flags are the
* responsbility of libsas to observe at the start of the error
* handler thread.
*/
if (!idev || !old_request) {
/* The request has already completed and there
* is nothing to do here other than to set the task
* done bit, and indicate that the task abort function
* was successful.
*/
spin_lock_irqsave(&task->task_state_lock, flags);
task->task_state_flags |= SAS_TASK_STATE_DONE;
task->task_state_flags &= ~(SAS_TASK_AT_INITIATOR |
SAS_TASK_STATE_PENDING);
spin_unlock_irqrestore(&task->task_state_lock, flags);
ret = TMF_RESP_FUNC_COMPLETE;
dev_warn(&ihost->pdev->dev,
"%s: abort task not needed for %p\n",
__func__, task);
goto out;
}
/* Suspend the RNC, kill the TC */
if (isci_remote_device_suspend_terminate(ihost, idev, old_request)
!= SCI_SUCCESS) {
dev_warn(&ihost->pdev->dev,
"%s: isci_remote_device_reset_terminate(dev=%p, "
"req=%p, task=%p) failed\n",
__func__, idev, old_request, task);
ret = TMF_RESP_FUNC_FAILED;
goto out;
}
spin_lock_irqsave(&ihost->scic_lock, flags);
if (task->task_proto == SAS_PROTOCOL_SMP ||
sas_protocol_ata(task->task_proto) ||
target_done_already ||
test_bit(IDEV_GONE, &idev->flags)) {
spin_unlock_irqrestore(&ihost->scic_lock, flags);
/* No task to send, so explicitly resume the device here */
isci_remote_device_resume_from_abort(ihost, idev);
dev_warn(&ihost->pdev->dev,
"%s: %s request"
" or complete_in_target (%d), "
"or IDEV_GONE (%d), thus no TMF\n",
__func__,
((task->task_proto == SAS_PROTOCOL_SMP)
? "SMP"
: (sas_protocol_ata(task->task_proto)
? "SATA/STP"
: "<other>")
),
test_bit(IREQ_COMPLETE_IN_TARGET,
&old_request->flags),
test_bit(IDEV_GONE, &idev->flags));
spin_lock_irqsave(&task->task_state_lock, flags);
task->task_state_flags &= ~(SAS_TASK_AT_INITIATOR |
SAS_TASK_STATE_PENDING);
task->task_state_flags |= SAS_TASK_STATE_DONE;
spin_unlock_irqrestore(&task->task_state_lock, flags);
ret = TMF_RESP_FUNC_COMPLETE;
} else {
/* Fill in the tmf structure */
isci_task_build_abort_task_tmf(&tmf, isci_tmf_ssp_task_abort,
old_request);
spin_unlock_irqrestore(&ihost->scic_lock, flags);
/* Send the task management request. */
#define ISCI_ABORT_TASK_TIMEOUT_MS 500 /* 1/2 second timeout */
ret = isci_task_execute_tmf(ihost, idev, &tmf,
ISCI_ABORT_TASK_TIMEOUT_MS);
}
out:
dev_warn(&ihost->pdev->dev,
"%s: Done; dev = %p, task = %p , old_request == %p\n",
__func__, idev, task, old_request);
isci_put_device(idev);
return ret;
}
/**
* isci_task_abort_task_set() - This function is one of the SAS Domain Template
* functions. This is one of the Task Management functoins called by libsas,
* to abort all task for the given lun.
* @d_device: This parameter specifies the domain device associated with this
* request.
* @lun: This parameter specifies the lun associated with this request.
*
* status, zero indicates success.
*/
int isci_task_abort_task_set(
struct domain_device *d_device,
u8 *lun)
{
return TMF_RESP_FUNC_FAILED;
}
/**
* isci_task_clear_aca() - This function is one of the SAS Domain Template
* functions. This is one of the Task Management functoins called by libsas.
* @d_device: This parameter specifies the domain device associated with this
* request.
* @lun: This parameter specifies the lun associated with this request.
*
* status, zero indicates success.
*/
int isci_task_clear_aca(
struct domain_device *d_device,
u8 *lun)
{
return TMF_RESP_FUNC_FAILED;
}
/**
* isci_task_clear_task_set() - This function is one of the SAS Domain Template
* functions. This is one of the Task Management functoins called by libsas.
* @d_device: This parameter specifies the domain device associated with this
* request.
* @lun: This parameter specifies the lun associated with this request.
*
* status, zero indicates success.
*/
int isci_task_clear_task_set(
struct domain_device *d_device,
u8 *lun)
{
return TMF_RESP_FUNC_FAILED;
}
/**
* isci_task_query_task() - This function is implemented to cause libsas to
* correctly escalate the failed abort to a LUN or target reset (this is
* because sas_scsi_find_task libsas function does not correctly interpret
* all return codes from the abort task call). When TMF_RESP_FUNC_SUCC is
* returned, libsas turns this into a LUN reset; when FUNC_FAILED is
* returned, libsas will turn this into a target reset
* @task: This parameter specifies the sas task being queried.
* @lun: This parameter specifies the lun associated with this request.
*
* status, zero indicates success.
*/
int isci_task_query_task(
struct sas_task *task)
{
/* See if there is a pending device reset for this device. */
if (task->task_state_flags & SAS_TASK_NEED_DEV_RESET)
return TMF_RESP_FUNC_FAILED;
else
return TMF_RESP_FUNC_SUCC;
}
/*
* isci_task_request_complete() - This function is called by the sci core when
* an task request completes.
* @ihost: This parameter specifies the ISCI host object
* @ireq: This parameter is the completed isci_request object.
* @completion_status: This parameter specifies the completion status from the
* sci core.
*
* none.
*/
void
isci_task_request_complete(struct isci_host *ihost,
struct isci_request *ireq,
enum sci_task_status completion_status)
{
struct isci_tmf *tmf = isci_request_access_tmf(ireq);
struct completion *tmf_complete = NULL;
dev_dbg(&ihost->pdev->dev,
"%s: request = %p, status=%d\n",
__func__, ireq, completion_status);
set_bit(IREQ_COMPLETE_IN_TARGET, &ireq->flags);
if (tmf) {
tmf->status = completion_status;
if (tmf->proto == SAS_PROTOCOL_SSP) {
memcpy(&tmf->resp.resp_iu,
&ireq->ssp.rsp,
SSP_RESP_IU_MAX_SIZE);
} else if (tmf->proto == SAS_PROTOCOL_SATA) {
memcpy(&tmf->resp.d2h_fis,
&ireq->stp.rsp,
sizeof(struct dev_to_host_fis));
}
/* PRINT_TMF( ((struct isci_tmf *)request->task)); */
tmf_complete = tmf->complete;
}
sci_controller_complete_io(ihost, ireq->target_device, ireq);
/* set the 'terminated' flag handle to make sure it cannot be terminated
* or completed again.
*/
set_bit(IREQ_TERMINATED, &ireq->flags);
if (test_and_clear_bit(IREQ_ABORT_PATH_ACTIVE, &ireq->flags))
wake_up_all(&ihost->eventq);
if (!test_bit(IREQ_NO_AUTO_FREE_TAG, &ireq->flags))
isci_free_tag(ihost, ireq->io_tag);
/* The task management part completes last. */
if (tmf_complete)
complete(tmf_complete);
}
static int isci_reset_device(struct isci_host *ihost,
struct domain_device *dev,
struct isci_remote_device *idev)
{
int rc = TMF_RESP_FUNC_COMPLETE, reset_stat = -1;
struct sas_phy *phy = sas_get_local_phy(dev);
struct isci_port *iport = dev->port->lldd_port;
dev_dbg(&ihost->pdev->dev, "%s: idev %p\n", __func__, idev);
/* Suspend the RNC, terminate all outstanding TCs. */
if (isci_remote_device_suspend_terminate(ihost, idev, NULL)
!= SCI_SUCCESS) {
rc = TMF_RESP_FUNC_FAILED;
goto out;
}
/* Note that since the termination for outstanding requests succeeded,
* this function will return success. This is because the resets will
* only fail if the device has been removed (ie. hotplug), and the
* primary duty of this function is to cleanup tasks, so that is the
* relevant status.
*/
if (!test_bit(IDEV_GONE, &idev->flags)) {
if (scsi_is_sas_phy_local(phy)) {
struct isci_phy *iphy = &ihost->phys[phy->number];
reset_stat = isci_port_perform_hard_reset(ihost, iport,
iphy);
} else
reset_stat = sas_phy_reset(phy, !dev_is_sata(dev));
}
/* Explicitly resume the RNC here, since there was no task sent. */
isci_remote_device_resume_from_abort(ihost, idev);
dev_dbg(&ihost->pdev->dev, "%s: idev %p complete, reset_stat=%d.\n",
__func__, idev, reset_stat);
out:
sas_put_local_phy(phy);
return rc;
}
int isci_task_I_T_nexus_reset(struct domain_device *dev)
{
struct isci_host *ihost = dev_to_ihost(dev);
struct isci_remote_device *idev;
unsigned long flags;
int ret;
spin_lock_irqsave(&ihost->scic_lock, flags);
idev = isci_get_device(dev->lldd_dev);
spin_unlock_irqrestore(&ihost->scic_lock, flags);
if (!idev) {
/* XXX: need to cleanup any ireqs targeting this
* domain_device
*/
ret = -ENODEV;
goto out;
}
ret = isci_reset_device(ihost, dev, idev);
out:
isci_put_device(idev);
return ret;
}